Groschopp 47783 specsheet
•
0 likes•49 views
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 50Hz voltage and 2540rpm speed connected to a PS1900 5:1 ratio gearbox. The motor has a no load speed of 507.1rpm, produces 10.4lb-in of torque, and draws 0.49amps of current. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor and gearbox are sold and serviced by Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 47726 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 5:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1450 rpm, with the geared output running at 290.8 rpm.
- At full load, the motor outputs 21 watts of power at 0.0281 horsepower.
- Charts show torque and efficiency at varying speeds both when cold and hot.
- The motor has a continuous duty cycle and maximum current of 0.49 amps during start or stall conditions.
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47786 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 542 rpm, maximum torque of 15.34 lb-in, start/stall current of 1 amp, and maximum efficiencies of 82.8% for the gearbox and 51.1% for the motor. Performance curves show speed, torque, and efficiency over a range of torques from 0 to 480 rpm.
Groschopp 47785 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current, output, and duty cycle. It also includes efficiency percentages for the gearbox, motor, and system, as well as start/stall conditions. Additionally, it shows torque and speed curves along with efficiency versus torque for both cold and hot operating conditions. The motor is serviced and sold by Electromate.
Groschopp 47749 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 180:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output of 0.0135 HP at 8.1 rpm, and torque measurements for startup, operating, and breakdown conditions. Charts show efficiency curves for the gearbox, motor, and overall system at varying torque and speed levels.
Groschopp 66059 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 230V 60Hz voltage and 1520rpm speed connected to a 5:1 ratio PL 7300 gearbox. Key specifications include a 306.5rpm speed and 37.4lb-in torque output at 0.92amps and 136watts. Breakdown torque is 82.07lb-in at 195.8rpm, and startup torque is 71.23lb-in at 4.1rpm. The motor has a continuous duty cycle with 54.3% system efficiency. Startup current is 2.56amps with 71.28lb-in torque. Speed and efficiency curves are provided against torque levels from 0-360lb-
Groschopp 47780 specsheet
This document provides specifications for a 1 phase AC motor with a 5:1 ratio gearbox. It details the motor's voltage, speed, product ID number and other key specifications. Charts are included showing torque and efficiency at varying speeds both when cold and hot. The motor has a continuous duty cycle and is sold and serviced by Electromate.
Groschopp 47751 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 320:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 4.7 rpm output speed, 125 lb-in of torque, and 0.19 amps of current. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The gearbox and motor efficiencies are 40.8% and 39.2% respectively, yielding a system efficiency of 16.0%.
Recommended
Groschopp 47726 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 5:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1450 rpm, with the geared output running at 290.8 rpm.
- At full load, the motor outputs 21 watts of power at 0.0281 horsepower.
- Charts show torque and efficiency at varying speeds both when cold and hot.
- The motor has a continuous duty cycle and maximum current of 0.49 amps during start or stall conditions.
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47786 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 542 rpm, maximum torque of 15.34 lb-in, start/stall current of 1 amp, and maximum efficiencies of 82.8% for the gearbox and 51.1% for the motor. Performance curves show speed, torque, and efficiency over a range of torques from 0 to 480 rpm.
Groschopp 47785 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current, output, and duty cycle. It also includes efficiency percentages for the gearbox, motor, and system, as well as start/stall conditions. Additionally, it shows torque and speed curves along with efficiency versus torque for both cold and hot operating conditions. The motor is serviced and sold by Electromate.
Groschopp 47749 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 180:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output of 0.0135 HP at 8.1 rpm, and torque measurements for startup, operating, and breakdown conditions. Charts show efficiency curves for the gearbox, motor, and overall system at varying torque and speed levels.
Groschopp 66059 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 230V 60Hz voltage and 1520rpm speed connected to a 5:1 ratio PL 7300 gearbox. Key specifications include a 306.5rpm speed and 37.4lb-in torque output at 0.92amps and 136watts. Breakdown torque is 82.07lb-in at 195.8rpm, and startup torque is 71.23lb-in at 4.1rpm. The motor has a continuous duty cycle with 54.3% system efficiency. Startup current is 2.56amps with 71.28lb-in torque. Speed and efficiency curves are provided against torque levels from 0-360lb-
Groschopp 47780 specsheet
This document provides specifications for a 1 phase AC motor with a 5:1 ratio gearbox. It details the motor's voltage, speed, product ID number and other key specifications. Charts are included showing torque and efficiency at varying speeds both when cold and hot. The motor has a continuous duty cycle and is sold and serviced by Electromate.
Groschopp 47751 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 320:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 4.7 rpm output speed, 125 lb-in of torque, and 0.19 amps of current. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The gearbox and motor efficiencies are 40.8% and 39.2% respectively, yielding a system efficiency of 16.0%.
Groschopp 47776 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at varying speeds. It lists the motor as a 1 Ph 6540 TENV AC motor running at 230v 60Hz with a 1500 rpm speed and 5:1 ratio gearbox. Charts show its torque, speed, current and efficiency at different loads both cold and hot.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" conditions, the motor can output speeds of 3.9 rpm and 1.7 rpm with torques of 377.1 lb-in and 340.1 lb-in respectively.
- The motor has a continuous duty cycle with efficiencies of 38% for the motor alone and 22.8% for the overall system under normal
Groschopp 47739 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio PS 1900 gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output speed of 292.4 rpm, output torque of 4.5 lb-in, current of 0.19 amps, output power of 16 watts, and output horsepower of 0.0208 HP. Charts show torque and speed curves from cold start up to continuous running, with efficiency ranging from 40.6% for the motor to 32.5% for the overall system.
Groschopp 74541 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 20:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1320 rpm, output speed of 65.7 rpm, output torque of 83.7 lb-in, and current of 0.75 amps. Charts show torque and efficiency curves across a range of speeds from 0 to 225 rpm when cold and hot. The motor has a continuous duty cycle and system efficiency of 36.3%.
Groschopp 66367 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 19.6 rpm, torque of 424.8 lb-in, current of 2.36 amps, and efficiency between 54.1-67.7% depending on the motor, gearbox, or full system. Startup conditions include 4.88 amps of current and 487.84 lb-in of torque. Performance charts also show torque and speed output at varying RPMs along with efficiency levels when cold or hot.
Groschopp 47761 specsheet
This document provides specifications for an AC motor with a 5:1 ratio gearbox. It lists details such as the motor voltage, speed, gearbox ratio, and product ID. It then gives performance data for the motor such as rated speed, torque, current draw, output power, and duty cycle. Charts show torque and efficiency at varying speeds both when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 47727 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a PS 1900 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1450 rpm, output speed of 145.4 rpm at 11.6 lb-in of torque drawing 0.25 amps of current. The motor has a continuous duty cycle and system efficiency of 30.8%. Startup requires 0.49 amps producing 21.43 lb-in of torque. A graph shows efficiency curves against torque and speed for cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47762 specsheet
This document provides specifications for an AC 1 Phase 6540 TEFC motor with a PS 1900 15:1 ratio gearbox. The motor operates at 115V 60Hz with a no-load speed of 2990 rpm. Key specifications include an output speed of 199.3 rpm, torque of 17.8 lb-in, and current of 0.98 amps. Performance charts show speed, torque, efficiency at various loads from start up to full load. The gearbox, motor and system efficiencies are 78.7%, 49.2% and 38.7% respectively.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 74504 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to an RA 2600T 30:1 ratio gearbox. The motor has a rated output of 52rpm and 100lb-in of torque while drawing 0.63amps. Performance charts show torque and efficiency at varying speeds. The motor has continuous duty and startup current of 1.77amps.
Groschopp 74503 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 20:1 ratio RA 2600T gearbox. Key details include:
- The motor operates at 230V 60Hz and 1600rpm, with the gearbox providing an output speed of 84.6rpm.
- Under normal operating conditions, the system outputs 65W of power at 0.0872HP.
- Under maximum load conditions, the motor can output up to 311.17lb-in of torque while drawing 3.35amps of current.
- System efficiency is rated at 35.1% under normal operating conditions.
Groschopp 47748 specsheet
This document provides specifications for an AC 3 Ph 6540 TENV motor with a PS 1900 120:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 12.2 rpm output speed, 64.9 lb-in of torque, and 0.19 amps of current. Breakdown and pullup tests were also run showing lower speeds and higher torques than the rating. Efficiency is highest for the gearbox at 48.3% and lowest for the overall system at 19.6%. Startup requires 0.39 amps and generates 155.64 lb-in of torque. A graph shows efficiency decreases with speed.
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47749 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 180:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output of 0.0135 HP at 8.1 rpm, and torque measurements for startup, operating, and breakdown conditions. Charts show efficiency curves for the gearbox, motor, and overall system at varying torque and speed levels.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" loads, the motor can provide up to 3.9 rpm and 377 lb-in of torque, or 1.7 rpm and 340 lb-in of torque respectively.
- Efficiency is highest at full load, with the gearbox, motor, and overall system achieving up to 60.1%, 38.0%, and
Groschopp 47787 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 630.7 rpm, start/stall torque of 11.25 lb-in, and maximum efficiencies of 82.8% for the gearbox and 54.8% for the motor. Performance charts show speed, torque, and efficiency at various loads both cold and hot. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and outputs 305.7 rpm through the gearbox. Key specifications include an output of 26 watts at 0.0353 HP as well as start/stall current of 1.32 amps and torque of 6.42 lb-in. Charts show efficiency curves for torque, speed, and temperature. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm single phase and draws 0.62 amps of current at its rated output of 305.7 rpm and 7.3 lb-in of torque. Startup conditions draw 1.32 amps at 6.42 lb-in of torque. The document also provides efficiency ratings for the gearbox, motor and overall system at various torque levels, as well as notes on a 16uF 250V capacitor.
Groschopp 47751 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 320:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 4.7 rpm output speed, 125 lb-in of torque, and 0.19 amps of current. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The gearbox and motor each have around 40% efficiency while the system efficiency is 16%.
More Related Content
What's hot
Groschopp 47776 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at varying speeds. It lists the motor as a 1 Ph 6540 TENV AC motor running at 230v 60Hz with a 1500 rpm speed and 5:1 ratio gearbox. Charts show its torque, speed, current and efficiency at different loads both cold and hot.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" conditions, the motor can output speeds of 3.9 rpm and 1.7 rpm with torques of 377.1 lb-in and 340.1 lb-in respectively.
- The motor has a continuous duty cycle with efficiencies of 38% for the motor alone and 22.8% for the overall system under normal
Groschopp 47739 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio PS 1900 gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output speed of 292.4 rpm, output torque of 4.5 lb-in, current of 0.19 amps, output power of 16 watts, and output horsepower of 0.0208 HP. Charts show torque and speed curves from cold start up to continuous running, with efficiency ranging from 40.6% for the motor to 32.5% for the overall system.
Groschopp 74541 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 20:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1320 rpm, output speed of 65.7 rpm, output torque of 83.7 lb-in, and current of 0.75 amps. Charts show torque and efficiency curves across a range of speeds from 0 to 225 rpm when cold and hot. The motor has a continuous duty cycle and system efficiency of 36.3%.
Groschopp 66367 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 19.6 rpm, torque of 424.8 lb-in, current of 2.36 amps, and efficiency between 54.1-67.7% depending on the motor, gearbox, or full system. Startup conditions include 4.88 amps of current and 487.84 lb-in of torque. Performance charts also show torque and speed output at varying RPMs along with efficiency levels when cold or hot.
Groschopp 47761 specsheet
This document provides specifications for an AC motor with a 5:1 ratio gearbox. It lists details such as the motor voltage, speed, gearbox ratio, and product ID. It then gives performance data for the motor such as rated speed, torque, current draw, output power, and duty cycle. Charts show torque and efficiency at varying speeds both when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 47727 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a PS 1900 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1450 rpm, output speed of 145.4 rpm at 11.6 lb-in of torque drawing 0.25 amps of current. The motor has a continuous duty cycle and system efficiency of 30.8%. Startup requires 0.49 amps producing 21.43 lb-in of torque. A graph shows efficiency curves against torque and speed for cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47762 specsheet
This document provides specifications for an AC 1 Phase 6540 TEFC motor with a PS 1900 15:1 ratio gearbox. The motor operates at 115V 60Hz with a no-load speed of 2990 rpm. Key specifications include an output speed of 199.3 rpm, torque of 17.8 lb-in, and current of 0.98 amps. Performance charts show speed, torque, efficiency at various loads from start up to full load. The gearbox, motor and system efficiencies are 78.7%, 49.2% and 38.7% respectively.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 74504 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to an RA 2600T 30:1 ratio gearbox. The motor has a rated output of 52rpm and 100lb-in of torque while drawing 0.63amps. Performance charts show torque and efficiency at varying speeds. The motor has continuous duty and startup current of 1.77amps.
Groschopp 74503 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 20:1 ratio RA 2600T gearbox. Key details include:
- The motor operates at 230V 60Hz and 1600rpm, with the gearbox providing an output speed of 84.6rpm.
- Under normal operating conditions, the system outputs 65W of power at 0.0872HP.
- Under maximum load conditions, the motor can output up to 311.17lb-in of torque while drawing 3.35amps of current.
- System efficiency is rated at 35.1% under normal operating conditions.
Groschopp 47748 specsheet
This document provides specifications for an AC 3 Ph 6540 TENV motor with a PS 1900 120:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 12.2 rpm output speed, 64.9 lb-in of torque, and 0.19 amps of current. Breakdown and pullup tests were also run showing lower speeds and higher torques than the rating. Efficiency is highest for the gearbox at 48.3% and lowest for the overall system at 19.6%. Startup requires 0.39 amps and generates 155.64 lb-in of torque. A graph shows efficiency decreases with speed.
What's hot (12)
Similar to Groschopp 47783 specsheet
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47737 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 240:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0132 HP, maximum torque of 480.26 lb-in, and continuous duty cycle. Performance charts show efficiency levels at varying torques and speeds both when cold and hot.
Groschopp 47749 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 180:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output of 0.0135 HP at 8.1 rpm, and torque measurements for startup, operating, and breakdown conditions. Charts show efficiency curves for the gearbox, motor, and overall system at varying torque and speed levels.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" loads, the motor can provide up to 3.9 rpm and 377 lb-in of torque, or 1.7 rpm and 340 lb-in of torque respectively.
- Efficiency is highest at full load, with the gearbox, motor, and overall system achieving up to 60.1%, 38.0%, and
Groschopp 47787 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 630.7 rpm, start/stall torque of 11.25 lb-in, and maximum efficiencies of 82.8% for the gearbox and 54.8% for the motor. Performance charts show speed, torque, and efficiency at various loads both cold and hot. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and outputs 305.7 rpm through the gearbox. Key specifications include an output of 26 watts at 0.0353 HP as well as start/stall current of 1.32 amps and torque of 6.42 lb-in. Charts show efficiency curves for torque, speed, and temperature. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm single phase and draws 0.62 amps of current at its rated output of 305.7 rpm and 7.3 lb-in of torque. Startup conditions draw 1.32 amps at 6.42 lb-in of torque. The document also provides efficiency ratings for the gearbox, motor and overall system at various torque levels, as well as notes on a 16uF 250V capacitor.
Groschopp 47751 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 320:1 ratio gearbox. The motor runs at 1460 rpm on 230V 60Hz power and is rated for 4.7 rpm output speed, 125 lb-in of torque, and 0.19 amps of current. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The gearbox and motor each have around 40% efficiency while the system efficiency is 16%.
Groschopp 47784 specsheet
This document provides specifications for a motor, gearbox, and power system. The motor is an AC 3 Phase 6540 TEFC motor that operates at 230V 60Hz and produces 3030 RPM. It is paired with a PS1900 5:1 ratio gearbox. Key specifications include an output speed of 606.2 RPM, torque of 8.2 lb-in, and current of 0.39 amps. Charts show torque and efficiency at varying speeds both when cold and hot. The system has a continuous duty cycle and overall efficiency of 46.6%. It can produce up to 14.81 lb-in of torque and 1.15 amps of current at start or stall.
Groschopp 47752 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, and performance metrics like output speed, torque, current, and efficiency at various loads. It lists the motor as an AC 1 Ph 6540 TENV operating at 115v 60Hz with a 3060 rpm and a 5:1 ratio gearbox. Key specifications reported include an output speed of 611.4 rpm, torque of 3.8 lb-in, current of 0.62 amps, and efficiencies of the gearbox, motor, and overall system.
Groschopp 47752 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, and performance metrics like output speed, torque, current, and efficiency at various loads. It lists the motor as an AC 1 Ph 6540 TENV operating at 115v 60Hz with a 3060 rpm and a 5:1 ratio gearbox. Key specifications reported include an output speed of 611.4 rpm, torque of 3.8 lb-in, current of 0.62 amps, and efficiencies of the gearbox, motor, and overall system.
Groschopp 47748 specsheet
This document provides specifications for an AC 3 Ph 6540 TENV motor with a PS 1900 120:1 ratio gearbox. The motor operates at 230V 60Hz with a no-load speed of 12.2rpm, torque of 64.9lb-in, and current of 0.19amps. Under full load conditions, the motor produces 9watts of power and 0.0125HP at an efficiency of 19.6% for the overall system. Startup conditions require 0.39amps and produce 155.64lb-in of torque. A graph shows efficiency peaks between 60-100rpm.
Groschopp 47782 specsheet
This document provides specifications for a 1 phase AC motor with a 15:1 ratio gearbox. The motor runs at 1490 rpm and 230V 60Hz. Key specifications include an operating speed of 99.5 rpm, torque of 11.8 lb-in, current of 0.33 amps, and output of 14 watts and 0.0187 HP. Breakdown and pullup torque and speed are also listed. The motor has continuous duty cycle and system efficiency of 21.5%. Start/stall current and torque are provided. A graph shows torque, speed, and efficiency at varying RPMs for both cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47739 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio PS 1900 gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output speed of 292.4 rpm, output torque of 4.5 lb-in, current of 0.19 amps, output power of 16 watts, and output horsepower of 0.0208 HP. Charts show torque and speed curves from cold start up to continuous running, with efficiency ranging from 40.6% for the motor to 32.5% for the overall system.
Groschopp 47739 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio PS 1900 gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output speed of 292.4 rpm, output torque of 4.5 lb-in, current of 0.19 amps, output power of 16 watts, and output horsepower of 0.0208 HP. Charts show torque and speed curves from cold start up to continuous running, with efficiency ranging from 40.6% for the motor to 32.5% for the overall system.
Groschopp 66037 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a PL 7300 5:1 ratio gearbox. The motor and gearbox combination outputs 84 watts at 304.4 rpm with 23.3 lb-in of torque and draws 0.67 amps of current. Charts show torque and efficiency at varying speeds when cold and hot. The system has a continuous duty cycle and total system efficiency of 45.9%.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and is rated for 203.8 rpm output speed, 10.9 lb-in torque, and 0.62 amps current. System efficiency is 36.9% under continuous duty operation. Startup current is 1.32 amps with 9.63 lb-in stall torque. A graph shows efficiency decreases with increasing torque from a maximum of 90% at low torque.
Groschopp 66364 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 61:1 ratio gearbox. The motor has an output speed of 49.2 rpm, torque of 220.1 lb-in, and current of 2.64 amps, drawing 128 watts of power equivalent to 0.1718 HP. Startup current is 4.88 amps with 205.59 lb-in of torque. The gearbox and motor efficiencies are 76.3% and 56.8% respectively, resulting in a system efficiency of 43.4%. Performance charts provide speed, torque, efficiency and other data points under cold and hot
Similar to Groschopp 47783 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Recently uploaded (20)
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Groschopp 47783 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 3 Ph 6540 TEFC 230 v 50 Hz 2540 rpm 2 Poles PS 1900 5:1 Ratio Product ID: 47783 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 507.1 rpm 10.4lb-in 0.49 amps 62 watts 0.0836 HP Breakdown (Cold): Speed: Torque: 288.6 rpm 18.94 lb-in Pullup (Cold): Speed: Torque: 120.4 rpm 17.97lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 85.6 % 48.7 % 41.6 % Start/Stall Conditions: Current: Torque: 1.19 amps 18.61 lb-in Torque (lb-in) Speed RPM Efficiency 60.0 0.0 0.0 2.0 120.0 4.0 180.0 6.0 240.0 8.0 300.0 10.0 360.0 12.0 420.0 14.0 480.0 16.0 540.0 18.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com