Groschopp 74503 specsheet
•
0 likes•48 views
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 20:1 ratio RA 2600T gearbox. Key details include: - The motor operates at 230V 60Hz and 1600rpm, with the gearbox providing an output speed of 84.6rpm. - Under normal operating conditions, the system outputs 65W of power at 0.0872HP. - Under maximum load conditions, the motor can output up to 311.17lb-in of torque while drawing 3.35amps of current. - System efficiency is rated at 35.1% under normal operating conditions.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 74504 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to an RA 2600T 30:1 ratio gearbox. The motor has a rated output of 52rpm and 100lb-in of torque while drawing 0.63amps. Performance charts show torque and efficiency at varying speeds. The motor has continuous duty and startup current of 1.77amps.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 74528 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, and start/stall conditions. Graphs show torque and efficiency at varying speeds when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 74506 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to an RA 2600T 50:1 ratio gearbox. The motor and gearbox combination has an output speed of 32.5rpm, torque of 100lb-in, and power of 0.0516HP. Charts show efficiency and torque curves across a range of speeds. The system has a continuous duty cycle and efficiency of 29.2%.
Groschopp 74508 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed connected to an RA 2600T 7.5:1 ratio gearbox. Key specifications include a 206.4rpm speed and 16.4lb-in torque at 0.40amps and 40watts of output. Under a continuous duty cycle, the system has a 35.3% efficiency. Startup requires 1.08amps and generates 34lb-in of torque. Performance charts show speed and torque output over a range of loads. The motor and gearbox are sold and serviced by Electromate.
Groschopp 74523 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a 1350 rpm speed and 20:1 ratio gearbox. Performance data is provided for normal operating conditions as well as cold and hot start conditions. The motor is sold and serviced by Electromate.
Groschopp 74542 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 25:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 52.6rpm, output torque of 95lb-in, and current of 0.75amps. The gearbox has efficiencies of 60.7% for the gearbox, 54.3% for the motor, and 32.9% for the overall system. Startup conditions draw 1.77amps with 217.13lb-in of torque. Performance charts provide torque, speed, efficiency, and RPM data across a range of operating points. The motor and gearbox combination is sold and serviced by
Groschopp 74507 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a top speed of 1540rpm through a 60:1 ratio gearbox. Key specifications include an output speed of 26.7rpm, torque of 88.8lb-in, and efficiency between 30-60% depending on load. Startup current is 1.08amps with 205.27lb-in of torque. Performance charts also show speed and torque output under various conditions.
Recommended
Groschopp 74504 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to an RA 2600T 30:1 ratio gearbox. The motor has a rated output of 52rpm and 100lb-in of torque while drawing 0.63amps. Performance charts show torque and efficiency at varying speeds. The motor has continuous duty and startup current of 1.77amps.
Groschopp 47734 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a 230V 60Hz voltage and 1450rpm speed connected to a PS1900 90:1 ratio gearbox. The motor has a rated output of 16.2rpm at 71.4lb-in of torque drawing 0.25amps. Charts show torque and efficiency curves across a range of speeds.
Groschopp 74528 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, and start/stall conditions. Graphs show torque and efficiency at varying speeds when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 74506 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to an RA 2600T 50:1 ratio gearbox. The motor and gearbox combination has an output speed of 32.5rpm, torque of 100lb-in, and power of 0.0516HP. Charts show efficiency and torque curves across a range of speeds. The system has a continuous duty cycle and efficiency of 29.2%.
Groschopp 74508 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed connected to an RA 2600T 7.5:1 ratio gearbox. Key specifications include a 206.4rpm speed and 16.4lb-in torque at 0.40amps and 40watts of output. Under a continuous duty cycle, the system has a 35.3% efficiency. Startup requires 1.08amps and generates 34lb-in of torque. Performance charts show speed and torque output over a range of loads. The motor and gearbox are sold and serviced by Electromate.
Groschopp 74523 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a 1350 rpm speed and 20:1 ratio gearbox. Performance data is provided for normal operating conditions as well as cold and hot start conditions. The motor is sold and serviced by Electromate.
Groschopp 74542 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 25:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 52.6rpm, output torque of 95lb-in, and current of 0.75amps. The gearbox has efficiencies of 60.7% for the gearbox, 54.3% for the motor, and 32.9% for the overall system. Startup conditions draw 1.77amps with 217.13lb-in of torque. Performance charts provide torque, speed, efficiency, and RPM data across a range of operating points. The motor and gearbox combination is sold and serviced by
Groschopp 74507 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a top speed of 1540rpm through a 60:1 ratio gearbox. Key specifications include an output speed of 26.7rpm, torque of 88.8lb-in, and efficiency between 30-60% depending on load. Startup current is 1.08amps with 205.27lb-in of torque. Performance charts also show speed and torque output under various conditions.
Groschopp 74529 specsheet
This document provides specifications for a motor including its AC voltage, speed in RPM, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also lists breakdown, pullup, duty cycle, and start/stall condition details. Charts show torque and efficiency at varying speeds when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 74541 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 20:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1320 rpm, output speed of 65.7 rpm, output torque of 83.7 lb-in, and current of 0.75 amps. Charts show torque and efficiency curves across a range of speeds from 0 to 225 rpm when cold and hot. The motor has a continuous duty cycle and system efficiency of 36.3%.
Groschopp 74536 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to an RA 4000T 25:1 ratio gearbox. The motor has a rated output of 60.9 RPM and 86.7 lb-in of torque while drawing 0.67 amps of current. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle and system efficiency of 34.1%.
Groschopp 47745 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 230V 60Hz voltage and 1460 rpm speed that is connected to a PS 1900 45:1 ratio gearbox. The motor has a rated output of 32.5 rpm, 27.7 lb-in of torque and 0.19 amps of current. Charts show the motor's torque and speed breakdown, pullup, efficiency at various torque levels, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 74547 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 4000T 50:1 ratio gearbox. The motor runs at 1320 rpm and 230v 50Hz, and the gearbox provides an output speed of 26.3 rpm. Key specifications include an output torque of 138.5 lb-in, current of 0.75 amps, and efficiency ratings for the gearbox, motor, and overall system under various load conditions. The motor and gearbox combination is intended for continuous duty and has a start/stall current of 1.77 amps and torque of 352.53 lb-in.
Groschopp 74509 specsheet
This document provides specifications for a motor including its AC 3 Phase 8040 TENV voltage of 230v 60Hz, speed of 1540 rpm, and RA 2600T 10:1 ratio gearbox. It lists the motor's rating as 154.8 rpm and 20.7lb-in of torque drawing 0.40 amps of current and producing 38 watts or 0.0509 horsepower. Charts show torque and efficiency at varying speeds both when cold and hot. The motor has a continuous duty cycle and startup current of 1.08 amps producing 47.63 lb-in of torque. It is sold and serviced by Electromate.
Groschopp 74515 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a 1540 rpm speed and 60:1 ratio gearbox. The motor has a rating of 25.8 rpm speed and 106.9 lb-in of torque while drawing 0.40 amps of current and producing 33 watts of output power. Charts show torque and speed breakdown, pullup, efficiency versus torque, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 74534 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 4000T 15:1 ratio gearbox. The motor and gearbox combination has a rated output of 101.5 rpm and 50.5 lb-in of torque while drawing 0.67 amps of current. Charts show the system's torque, speed, and efficiency characteristics at various operational conditions including startup, continuous operation, and breakdown.
Groschopp 74533 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 3000T 25:1 ratio gearbox. Key specifications include a no-load speed of 60.9 rpm, stall torque of 167.72 lb-in, continuous duty cycle, and maximum efficiencies of 60.2% for the gearbox and 58.4% for the motor. Performance charts show torque, speed, and efficiency characteristics under cold and hot operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66036 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a PL 7300 377:1 ratio gearbox. Key specifications include a 230V 60Hz voltage and 1540rpm speed for the motor, and a 4.2rpm speed, 825lb-in torque, and 41W output for the motor and gearbox system. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47726 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 5:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1450 rpm, with the geared output running at 290.8 rpm.
- At full load, the motor outputs 21 watts of power at 0.0281 horsepower.
- Charts show torque and efficiency at varying speeds both when cold and hot.
- The motor has a continuous duty cycle and maximum current of 0.49 amps during start or stall conditions.
Groschopp 74545 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to an RA 4000T 30:1 ratio gearbox. The specifications include operating speeds and torques at various loads as well as efficiency curves and start/stall conditions. The motor and gearbox combination is rated for 43.8rpm and 88.5lb-in of torque drawing 0.75amps of current producing 46 watts of output power.
Groschopp 74522 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V 50Hz with a 1350 rpm speed and RA 2600T 15:1 ratio gearbox. The motor has a rated output of 89.9 rpm and 26.5 lb-in of torque while drawing 0.44 amps of current. Charts show torque and speed characteristics along with efficiency at varying torque levels.
Groschopp 74530 specsheet
This document provides specifications for a motor, gearbox, and system. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a speed of 1350 rpm. It has a RA 3000T 80:1 ratio gearbox. The system has a rated speed of 16.9 rpm, torque of 103.0 lb-in, and current of 0.44 amps, producing 21 watts of power. Breakdown torque is 325.05 lb-in at 8.4 rpm, and pullup torque is 298.02 lb-in at 0.4 rpm. The system runs continuously with efficiencies of 37.9% for the gearbox, 51% for the motor, and
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 74546 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 4000T 40:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 1320 rpm. Key specifications include an output speed of 32.9 rpm, torque of 121.8 lb-in, and current of 0.75 amps at an efficiency of 26.4%. Startup conditions draw 1.77 amps and 329.59 lb-in of torque. Performance charts provide speed, torque, efficiency and other operating characteristics. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" conditions, the motor can output speeds of 3.9 rpm and 1.7 rpm with torques of 377.1 lb-in and 340.1 lb-in respectively.
- The motor has a continuous duty cycle with efficiencies of 38% for the motor alone and 22.8% for the overall system under normal
Groschopp 66059 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 230V 60Hz voltage and 1520rpm speed connected to a 5:1 ratio PL 7300 gearbox. Key specifications include a 306.5rpm speed and 37.4lb-in torque output at 0.92amps and 136watts. Breakdown torque is 82.07lb-in at 195.8rpm, and startup torque is 71.23lb-in at 4.1rpm. The motor has a continuous duty cycle with 54.3% system efficiency. Startup current is 2.56amps with 71.28lb-in torque. Speed and efficiency curves are provided against torque levels from 0-360lb-
Groschopp 74511 specsheet
The document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a 1540 rpm speed and 20:1 ratio gearbox. It lists key metrics like output speed of 77.4 rpm, torque of 40.7 lb-in, current of 0.40 amps, and power output of 37 watts or 0.0500 horsepower. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The motor is rated for continuous duty cycle and has start/stall current of 1.08 amps and torque of 82.93 lb-in.
Groschopp 74532 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 20:1 ratio gearbox. Key details include:
- Motor voltage of 230V, 60Hz, 1510rpm, 4 poles
- Gearbox output of 76.1rpm at 78.6lb-in of torque drawing 0.67amps
- Breakdown torque of 160.4lb-in at 45.4rpm and pullup torque of 146.41lb-in at 4.5rpm
- Gearbox, motor and system efficiencies of 66.3%, 58.4% and 38.7% respectively
- Start/stall current of 1.77amps at 146.49lb
Groschopp 74537 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to a RA 4000T 30:1 ratio gearbox. The motor and gearbox combination has an output speed of 50.7 RPM, torque of 82.1 lb-in, and efficiency of 26.9% under continuous duty operation. Startup conditions draw 1.77 amps of current and generate 172.91 lb-in of torque. Performance charts show speed, torque, efficiency, and temperature-dependent characteristics.
Groschopp 74540 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed that is connected to an RA 2600T 15:1 ratio gearbox. The motor has a rated speed of 87.7rpm, torque of 61.7lb-in, and current of 0.75amps at 64watts and 0.0859HP output. At breakdown, the speed is 45.0rpm with 155.09lb-in torque, and at pullup the speed is 0.0rpm with 142.76lb-in torque. The gearbox, motor, and system efficiencies are 65.7%, 54.3%, and 35.7% respectively.
More Related Content
What's hot
Groschopp 74529 specsheet
This document provides specifications for a motor including its AC voltage, speed in RPM, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also lists breakdown, pullup, duty cycle, and start/stall condition details. Charts show torque and efficiency at varying speeds when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 74541 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 20:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1320 rpm, output speed of 65.7 rpm, output torque of 83.7 lb-in, and current of 0.75 amps. Charts show torque and efficiency curves across a range of speeds from 0 to 225 rpm when cold and hot. The motor has a continuous duty cycle and system efficiency of 36.3%.
Groschopp 74536 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to an RA 4000T 25:1 ratio gearbox. The motor has a rated output of 60.9 RPM and 86.7 lb-in of torque while drawing 0.67 amps of current. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle and system efficiency of 34.1%.
Groschopp 47745 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 230V 60Hz voltage and 1460 rpm speed that is connected to a PS 1900 45:1 ratio gearbox. The motor has a rated output of 32.5 rpm, 27.7 lb-in of torque and 0.19 amps of current. Charts show the motor's torque and speed breakdown, pullup, efficiency at various torque levels, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 74547 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 4000T 50:1 ratio gearbox. The motor runs at 1320 rpm and 230v 50Hz, and the gearbox provides an output speed of 26.3 rpm. Key specifications include an output torque of 138.5 lb-in, current of 0.75 amps, and efficiency ratings for the gearbox, motor, and overall system under various load conditions. The motor and gearbox combination is intended for continuous duty and has a start/stall current of 1.77 amps and torque of 352.53 lb-in.
Groschopp 74509 specsheet
This document provides specifications for a motor including its AC 3 Phase 8040 TENV voltage of 230v 60Hz, speed of 1540 rpm, and RA 2600T 10:1 ratio gearbox. It lists the motor's rating as 154.8 rpm and 20.7lb-in of torque drawing 0.40 amps of current and producing 38 watts or 0.0509 horsepower. Charts show torque and efficiency at varying speeds both when cold and hot. The motor has a continuous duty cycle and startup current of 1.08 amps producing 47.63 lb-in of torque. It is sold and serviced by Electromate.
Groschopp 74515 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a 1540 rpm speed and 60:1 ratio gearbox. The motor has a rating of 25.8 rpm speed and 106.9 lb-in of torque while drawing 0.40 amps of current and producing 33 watts of output power. Charts show torque and speed breakdown, pullup, efficiency versus torque, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 74534 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 4000T 15:1 ratio gearbox. The motor and gearbox combination has a rated output of 101.5 rpm and 50.5 lb-in of torque while drawing 0.67 amps of current. Charts show the system's torque, speed, and efficiency characteristics at various operational conditions including startup, continuous operation, and breakdown.
Groschopp 74533 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 3000T 25:1 ratio gearbox. Key specifications include a no-load speed of 60.9 rpm, stall torque of 167.72 lb-in, continuous duty cycle, and maximum efficiencies of 60.2% for the gearbox and 58.4% for the motor. Performance charts show torque, speed, and efficiency characteristics under cold and hot operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66036 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a PL 7300 377:1 ratio gearbox. Key specifications include a 230V 60Hz voltage and 1540rpm speed for the motor, and a 4.2rpm speed, 825lb-in torque, and 41W output for the motor and gearbox system. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47726 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 5:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1450 rpm, with the geared output running at 290.8 rpm.
- At full load, the motor outputs 21 watts of power at 0.0281 horsepower.
- Charts show torque and efficiency at varying speeds both when cold and hot.
- The motor has a continuous duty cycle and maximum current of 0.49 amps during start or stall conditions.
Groschopp 74545 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to an RA 4000T 30:1 ratio gearbox. The specifications include operating speeds and torques at various loads as well as efficiency curves and start/stall conditions. The motor and gearbox combination is rated for 43.8rpm and 88.5lb-in of torque drawing 0.75amps of current producing 46 watts of output power.
Groschopp 74522 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V 50Hz with a 1350 rpm speed and RA 2600T 15:1 ratio gearbox. The motor has a rated output of 89.9 rpm and 26.5 lb-in of torque while drawing 0.44 amps of current. Charts show torque and speed characteristics along with efficiency at varying torque levels.
Groschopp 74530 specsheet
This document provides specifications for a motor, gearbox, and system. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a speed of 1350 rpm. It has a RA 3000T 80:1 ratio gearbox. The system has a rated speed of 16.9 rpm, torque of 103.0 lb-in, and current of 0.44 amps, producing 21 watts of power. Breakdown torque is 325.05 lb-in at 8.4 rpm, and pullup torque is 298.02 lb-in at 0.4 rpm. The system runs continuously with efficiencies of 37.9% for the gearbox, 51% for the motor, and
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 74546 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 4000T 40:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 1320 rpm. Key specifications include an output speed of 32.9 rpm, torque of 121.8 lb-in, and current of 0.75 amps at an efficiency of 26.4%. Startup conditions draw 1.77 amps and 329.59 lb-in of torque. Performance charts provide speed, torque, efficiency and other operating characteristics. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" conditions, the motor can output speeds of 3.9 rpm and 1.7 rpm with torques of 377.1 lb-in and 340.1 lb-in respectively.
- The motor has a continuous duty cycle with efficiencies of 38% for the motor alone and 22.8% for the overall system under normal
What's hot (17)
Similar to Groschopp 74503 specsheet
Groschopp 66059 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 230V 60Hz voltage and 1520rpm speed connected to a 5:1 ratio PL 7300 gearbox. Key specifications include a 306.5rpm speed and 37.4lb-in torque output at 0.92amps and 136watts. Breakdown torque is 82.07lb-in at 195.8rpm, and startup torque is 71.23lb-in at 4.1rpm. The motor has a continuous duty cycle with 54.3% system efficiency. Startup current is 2.56amps with 71.28lb-in torque. Speed and efficiency curves are provided against torque levels from 0-360lb-
Groschopp 74511 specsheet
The document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a 1540 rpm speed and 20:1 ratio gearbox. It lists key metrics like output speed of 77.4 rpm, torque of 40.7 lb-in, current of 0.40 amps, and power output of 37 watts or 0.0500 horsepower. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The motor is rated for continuous duty cycle and has start/stall current of 1.08 amps and torque of 82.93 lb-in.
Groschopp 74532 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 20:1 ratio gearbox. Key details include:
- Motor voltage of 230V, 60Hz, 1510rpm, 4 poles
- Gearbox output of 76.1rpm at 78.6lb-in of torque drawing 0.67amps
- Breakdown torque of 160.4lb-in at 45.4rpm and pullup torque of 146.41lb-in at 4.5rpm
- Gearbox, motor and system efficiencies of 66.3%, 58.4% and 38.7% respectively
- Start/stall current of 1.77amps at 146.49lb
Groschopp 74537 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to a RA 4000T 30:1 ratio gearbox. The motor and gearbox combination has an output speed of 50.7 RPM, torque of 82.1 lb-in, and efficiency of 26.9% under continuous duty operation. Startup conditions draw 1.77 amps of current and generate 172.91 lb-in of torque. Performance charts show speed, torque, efficiency, and temperature-dependent characteristics.
Groschopp 74540 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed that is connected to an RA 2600T 15:1 ratio gearbox. The motor has a rated speed of 87.7rpm, torque of 61.7lb-in, and current of 0.75amps at 64watts and 0.0859HP output. At breakdown, the speed is 45.0rpm with 155.09lb-in torque, and at pullup the speed is 0.0rpm with 142.76lb-in torque. The gearbox, motor, and system efficiencies are 65.7%, 54.3%, and 35.7% respectively.
Groschopp 74531 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to a RA 2600T 10:1 ratio gearbox. The motor and gearbox combination can output 152.2rpm at 41.6lb-in of torque while drawing 0.67amps of current. Charts show the motor's torque, speed, and efficiency characteristics at various loads both when cold and hot.
Groschopp 66037 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a PL 7300 5:1 ratio gearbox. The motor and gearbox combination outputs 84 watts at 304.4 rpm with 23.3 lb-in of torque and draws 0.67 amps of current. Charts show torque and efficiency at varying speeds when cold and hot. The system has a continuous duty cycle and total system efficiency of 45.9%.
Groschopp 74512 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists breakdown, pullup, start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V/60Hz with a 1540rpm and 4 pole configuration paired with a RA 2600T 30:1 ratio gearbox.
Groschopp 66365 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to a RP 7300 90:1 ratio gearbox. The motor has an output of 33.4 rpm and 304.9 lb-in of torque at 2.64 amps and 120 watts or 0.1614 HP. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle with peak startup current of 4.88 amps and 284.11 lb-in of torque.
Groschopp 74501 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a RA 2600T 10:1 ratio gearbox. The motor operates at 230V 60Hz and 1600rpm, with the gearbox providing an output of 160rpm at 78.2lb-in of torque drawing 1.16amps of current. Charts show torque and efficiency curves for the system at cold and hot operating temperatures, with the gearbox and motor each providing over 50% efficiency and the system providing over 50% efficiency. The motor and gearbox are rated for continuous duty cycle operation.
Groschopp 74538 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to a RA 2600T 5:1 ratio gearbox. The motor has a rated output of 263rpm and 21.5lb-in of torque while drawing 0.75amps of current. Charts show the motor's torque, speed, and efficiency characteristics at various loads when cold and hot. The motor is intended for continuous duty and has a starting torque of 49.34lb-in while drawing 1.77amps.
Groschopp 74510 specsheet
This document provides specifications for a motor including its AC voltage, speed in RPM, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup conditions, duty cycle, efficiencies of the gearbox, motor and system, and graphs showing speed, torque and efficiency curves for cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 66048 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a 5:1 ratio PL 7300 gearbox. Key specifications include a rated speed of 312 RPM and torque of 20.2 lb-in, with an output of 74 watts and 0.0998 HP. Breakdown and pullup torque and speed values are also listed. The motor has a continuous duty cycle and system efficiency of 48.9%. Start/stall current and torque conditions are 1.63 amps and 43.66 lb-in. A graph shows torque, speed, and efficiency curves from cold to hot operation. The motor is sold and serviced by Electromate.
Groschopp 74513 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed connected to an RA 2600T 50:1 ratio gearbox. The motor has a rating of 31.0rpm and 94.3lb-in of torque at 0.40amps and 35watts of output or 0.0463HP. Breakdown torque is 186.29lb-in at 19.2rpm and pullup torque is 165.53lb-in at 0rpm. The duty cycle is continuous and efficiency is 50.4% for the gearbox, 60.2% for the motor, and 30.3% for the system. Start/stall current is 1
Groschopp 74535 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 4000T 20:1 ratio gearbox. Key details include:
- Motor voltage of 230V, 60Hz, 1510rpm, 4 poles
- Gearbox output of 76.1rpm at 68.3lb-in of torque drawing 0.67amps of current
- Breakdown torque of 150.68lb-in at 45.4rpm and pullup torque of 135.77lb-in at 4.5rpm
- Gearbox, motor and system efficiencies of 57.5%, 58.4% and 33.6% respectively
- Start/stall current of 1.77amps at 135.85
Groschopp 74505 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed that is connected to an RA 2600T 40:1 ratio gearbox. The motor has a continuous duty cycle and produces 38.7rpm output speed at 86.7lb-in of torque while drawing 0.40amps of current and outputting 40watts of power equivalent to 0.0532HP. Under a cold start, the motor can produce 24.0rpm at 169.46lb-in of torque and when stalled produces 0.0rpm at 153.14lb-in of torque drawing 1.08amps. Charts show the motor's torque, speed, efficiency and
Groschopp 74520 specsheet
This document provides specifications for a motor, gearbox, and system. The motor is an AC 3 Phase 8040 TENV operating at 230V 60Hz with a speed of 1540 rpm. It is paired with a RA 4000T 100:1 ratio gearbox. Key specifications include a rated speed of 15.5 rpm, torque of 103.7 lb-in, and current of 0.40 amps. Charts show torque and speed curves along with efficiency curves when cold and hot. The system has an overall efficiency of 16.7% with the motor at 60.2% and gearbox at 27.7%. It can operate continuously with a start/stall current of 1.08 amps and torque of
Groschopp 47727 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a PS 1900 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1450 rpm, output speed of 145.4 rpm at 11.6 lb-in of torque drawing 0.25 amps of current. The motor has a continuous duty cycle and system efficiency of 30.8%. Startup requires 0.49 amps producing 21.43 lb-in of torque. A graph shows efficiency curves against torque and speed for cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 74544 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 40:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 1320 rpm. Key specifications include an output speed of 32.9 rpm, torque of 142.8 lb-in, and efficiency of 30.9% for the overall system. Performance charts show torque, speed, and efficiency over a range of loads from start up to full speed.
Groschopp 66364 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 61:1 ratio gearbox. The motor has an output speed of 49.2 rpm, torque of 220.1 lb-in, and current of 2.64 amps, drawing 128 watts of power equivalent to 0.1718 HP. Startup current is 4.88 amps with 205.59 lb-in of torque. The gearbox and motor efficiencies are 76.3% and 56.8% respectively, resulting in a system efficiency of 43.4%. Performance charts provide speed, torque, efficiency and other data points under cold and hot
Similar to Groschopp 74503 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Recently uploaded (20)
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Groschopp 74503 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 3 Ph 8060 TEFC 230 v 60 Hz 1600 rpm 4 Poles RA 2600T 20:1 Ratio Product ID: 74503 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 84.6 rpm 64.9lb-in 1.04 amps 65 watts 0.0872 HP Breakdown (Cold): Speed: Torque: 44.8 rpm 343.35 lb-in Pullup (Cold): Speed: Torque: 0.0 rpm 311.17lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 60.6 % 57.8 % 35.1 % Start/Stall Conditions: Current: Torque: 3.35 amps 311.17 lb-in Torque (lb-in) Speed RPM Efficiency 9.0 0.0 0.0 40.0 18.0 80.0 27.0 120.0 36.0 160.0 45.0 200.0 54.0 240.0 63.0 280.0 72.0 320.0 81.0 360.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com