Groschopp 07103 specsheet
•
0 likes•21 views
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and output of 105 watts. The motor has a continuous duty cycle and efficiency of 73.2%. It can output up to 22.65 lb-in of torque at startup, drawing 6.58 amps of current. Performance charts show its torque and efficiency levels across a range of speeds.
Groschopp 07104 specsheet
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque to start or stall. A graph shows the motor's torque, speed, and efficiency across different operating conditions. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 50120 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 2650 rpm speed and a PS 1900 90:1 ratio gearbox. Key specifications include a rated speed of 29.5 rpm, torque of 63.4 lb-in, current of 2.8 amps, and power output of 22 watts or 0.0297 horsepower. The gearbox efficiency is 51.3%, motor efficiency is 66%, and system efficiency is 33.8%. Start/stall conditions are 12.4 amps current and 568.73 lb-in torque. Performance curves show torque and efficiency over speed.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 DC motor. It lists details such as the motor's voltage, speed, power rating, torque output, efficiency and start/stall conditions. Performance charts also show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 50116 specsheet
This document provides specifications for a PM 6013 motor with a 24V DC voltage and 2650 RPM speed that is connected to a PS 1900 20:1 ratio gearbox. The motor has a rating of 132.8 RPM and 19.9 lb-in of torque at 2.8 amps of current. The gearbox and motor efficiencies are 72.3% and 66% respectively, yielding a system efficiency of 47.7%. Start/stall conditions are 12.4 amps of current and 136.8 lb-in of torque. Performance curves are provided for speed, torque, and efficiency. The motor is sold and serviced by Electromate.
Groschopp 50113 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 531 rpm, a no-load current of 2.8 amps, a rated torque of 5.6 lb-in, and maximum efficiencies of 82.1% for the gearbox, 66% for the motor, and 54.2% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Recommended
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and output of 105 watts. The motor has a continuous duty cycle and efficiency of 73.2%. It can output up to 22.65 lb-in of torque at startup, drawing 6.58 amps of current. Performance charts show its torque and efficiency levels across a range of speeds.
Groschopp 07104 specsheet
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque to start or stall. A graph shows the motor's torque, speed, and efficiency across different operating conditions. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 50120 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 2650 rpm speed and a PS 1900 90:1 ratio gearbox. Key specifications include a rated speed of 29.5 rpm, torque of 63.4 lb-in, current of 2.8 amps, and power output of 22 watts or 0.0297 horsepower. The gearbox efficiency is 51.3%, motor efficiency is 66%, and system efficiency is 33.8%. Start/stall conditions are 12.4 amps current and 568.73 lb-in torque. Performance curves show torque and efficiency over speed.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 DC motor. It lists details such as the motor's voltage, speed, power rating, torque output, efficiency and start/stall conditions. Performance charts also show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 50116 specsheet
This document provides specifications for a PM 6013 motor with a 24V DC voltage and 2650 RPM speed that is connected to a PS 1900 20:1 ratio gearbox. The motor has a rating of 132.8 RPM and 19.9 lb-in of torque at 2.8 amps of current. The gearbox and motor efficiencies are 72.3% and 66% respectively, yielding a system efficiency of 47.7%. Start/stall conditions are 12.4 amps of current and 136.8 lb-in of torque. Performance curves are provided for speed, torque, and efficiency. The motor is sold and serviced by Electromate.
Groschopp 50113 specsheet
This document provides specifications for a PM 6013 24V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 531 rpm, a no-load current of 2.8 amps, a rated torque of 5.6 lb-in, and maximum efficiencies of 82.1% for the gearbox, 66% for the motor, and 54.2% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions.
Groschopp 50127 specsheet
This document provides specifications for a PM 6013 motor with a 15:1 ratio gearbox. The motor runs on 90V DC with a top speed of 2550 rpm. Key specifications include a rated speed of 168.9 rpm, torque of 15.4 lb-in, and current draw of 0.73 amps producing 31 watts of power. The gearbox and motor have efficiencies of 77.7% and 61.9% respectively, yielding a system efficiency of 48.1%. Startup requires 3.76 amps and generates 114.75 lb-in of torque. Performance curves show speed, torque, efficiency and rpm values over a range of torques from 0-180 lb-in.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps and 23.24 lb-in of torque. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque and efficiency across motor speed ranges from 0 to 4500 RPM.
Groschopp 50104 specsheet
The document provides specifications for a PM 6013 12V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 549.9 rpm, a no-load torque of 5.2 lb-in, a free-running current of 5.5 amps, and efficiencies of 81.5% for the gearbox, 61.1% for the motor, and 49.8% for the overall system. Start/stall conditions are listed as 21.88 amps current and 28.22 lb-in torque. Performance curves show torque, speed, and efficiency over a range of torque values from 0 to 490 lb-in.
Groschopp 50118 specsheet
This document provides specifications for a PM 6013 motor with a 24V DC voltage and 2650 RPM speed, paired with a PS 1900 40:1 ratio gearbox. The motor has a rating of 66.4 RPM speed and 31.6 lb-in of torque at 2.8 amps of current. Start/stall conditions are 12.4 amps of current and 273.3 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency at varying RPMs.
Groschopp 50137 specsheet
This document provides specifications for a PM 6013 motor with a PS 1900 15:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output speed of 170 rpm, torque of 10.8 lb-in, current of 0.52 amps, and power output of 22 watts. The motor has an efficiency of 52% while the gearbox is 74.6% efficient, resulting in a system efficiency of 38.8%. Charts show torque and speed performance as well as efficiency at varying torque levels.
Groschopp 50107 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 20:1 ratio PS 1900 gearbox. Key specifications include an output speed of 137.5 RPM, torque of 18.3 lb-in, current of 5.5 amps, and power output of 30 watts. The motor has a continuous duty cycle and efficiency of 61.1% for the motor alone and 43.6% for the overall system. Start/stall conditions are listed as 21.88 amps current and 111.51 lb-in torque. Performance charts show torque, speed, RPM, and efficiency at varying loads.
Groschopp 50117 specsheet
This document provides specifications for a PM 6013 24v DC motor with a 30:1 ratio gearbox. Key specifications include a no load speed of 88.5 rpm, torque of 27.7 lb-in, current of 2.8 amps, and power output of 29 watts. The motor has an efficiency of 66% and the gearbox has an efficiency of 67.3%, resulting in a system efficiency of 44.4%. Start/stall conditions are listed as 12.4 amps current and 196.29 lb-in torque. Performance curves are provided showing torque, speed, and efficiency at varying loads.
Groschopp 50108 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 30:1 ratio PS 1900 gearbox. Key specifications include a rated speed of 91.7 RPM, torque of 25.6 lb-in, current of 5.5 amps, and power output of 28 watts or 0.0372 HP. The gearbox efficiency is 66.6%, motor efficiency is 61.1%, and system efficiency is 40.7%. Start/stall conditions draw 21.88 amps and produce 158.53 lb-in of torque. Performance curves show torque and efficiency over a range of speeds.
Groschopp 50103 specsheet
This document provides specifications for a small DC motor with a high-ratio gearbox. The motor runs at 900 rpm and 12V, with an output speed of 4.8 rpm after passing through the 240:1 gearbox. Key specifications are listed, including torque of 125 lb-in, current of 1.67A, and power output of 7 watts or 0.0096 HP. Charts show the motor's torque and efficiency characteristics across a range of speeds. The motor is intended for continuous-duty operation and has a start/stall current of 7.31A and torque of 845.8 lb-in.
Groschopp 07104 specsheet
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque for starting and stalling. A graph shows the motor's torque, speed, and efficiency across different operating conditions.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque, speed, and efficiency over varying RPM ranges from 0 to 4500 RPM.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 motor with a voltage of 163V DC, speed of 2500 RPM, and output of 320 watts. It operates continuously at 2500 RPM and 10.8 lb-in of torque with an efficiency of 86.2%. It can output 111.08 lb-in of torque and draw 27.35 amps of current under start or stall conditions. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and no gearbox. Key specifications include a rating of 2500 rpm and 105 watts of output power. The motor has an efficiency of 73.2% and can produce up to 22.65 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07201 specsheet
This document provides specifications for a BL 8040 DC motor with a voltage of 163V, speed of 2500 RPM, and no gearbox. The motor has a continuous duty cycle and efficiency of 78.2%. It can output 203 watts of power at 0.27 HP. Under start or stall conditions, the motor draws 14.75 amps of current and produces 55.80 lb-in of torque. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
More Related Content
What's hot
Groschopp 50127 specsheet
This document provides specifications for a PM 6013 motor with a 15:1 ratio gearbox. The motor runs on 90V DC with a top speed of 2550 rpm. Key specifications include a rated speed of 168.9 rpm, torque of 15.4 lb-in, and current draw of 0.73 amps producing 31 watts of power. The gearbox and motor have efficiencies of 77.7% and 61.9% respectively, yielding a system efficiency of 48.1%. Startup requires 3.76 amps and generates 114.75 lb-in of torque. Performance curves show speed, torque, efficiency and rpm values over a range of torques from 0-180 lb-in.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps and 23.24 lb-in of torque. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque and efficiency across motor speed ranges from 0 to 4500 RPM.
Groschopp 50104 specsheet
The document provides specifications for a PM 6013 12V DC motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 549.9 rpm, a no-load torque of 5.2 lb-in, a free-running current of 5.5 amps, and efficiencies of 81.5% for the gearbox, 61.1% for the motor, and 49.8% for the overall system. Start/stall conditions are listed as 21.88 amps current and 28.22 lb-in torque. Performance curves show torque, speed, and efficiency over a range of torque values from 0 to 490 lb-in.
Groschopp 50118 specsheet
This document provides specifications for a PM 6013 motor with a 24V DC voltage and 2650 RPM speed, paired with a PS 1900 40:1 ratio gearbox. The motor has a rating of 66.4 RPM speed and 31.6 lb-in of torque at 2.8 amps of current. Start/stall conditions are 12.4 amps of current and 273.3 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency at varying RPMs.
Groschopp 50137 specsheet
This document provides specifications for a PM 6013 motor with a PS 1900 15:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2550 rpm, output speed of 170 rpm, torque of 10.8 lb-in, current of 0.52 amps, and power output of 22 watts. The motor has an efficiency of 52% while the gearbox is 74.6% efficient, resulting in a system efficiency of 38.8%. Charts show torque and speed performance as well as efficiency at varying torque levels.
Groschopp 50107 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 20:1 ratio PS 1900 gearbox. Key specifications include an output speed of 137.5 RPM, torque of 18.3 lb-in, current of 5.5 amps, and power output of 30 watts. The motor has a continuous duty cycle and efficiency of 61.1% for the motor alone and 43.6% for the overall system. Start/stall conditions are listed as 21.88 amps current and 111.51 lb-in torque. Performance charts show torque, speed, RPM, and efficiency at varying loads.
Groschopp 50117 specsheet
This document provides specifications for a PM 6013 24v DC motor with a 30:1 ratio gearbox. Key specifications include a no load speed of 88.5 rpm, torque of 27.7 lb-in, current of 2.8 amps, and power output of 29 watts. The motor has an efficiency of 66% and the gearbox has an efficiency of 67.3%, resulting in a system efficiency of 44.4%. Start/stall conditions are listed as 12.4 amps current and 196.29 lb-in torque. Performance curves are provided showing torque, speed, and efficiency at varying loads.
Groschopp 50108 specsheet
This document provides specifications for a PM 6013 motor with a 12V DC voltage, 2750 RPM speed, and 30:1 ratio PS 1900 gearbox. Key specifications include a rated speed of 91.7 RPM, torque of 25.6 lb-in, current of 5.5 amps, and power output of 28 watts or 0.0372 HP. The gearbox efficiency is 66.6%, motor efficiency is 61.1%, and system efficiency is 40.7%. Start/stall conditions draw 21.88 amps and produce 158.53 lb-in of torque. Performance curves show torque and efficiency over a range of speeds.
Groschopp 50103 specsheet
This document provides specifications for a small DC motor with a high-ratio gearbox. The motor runs at 900 rpm and 12V, with an output speed of 4.8 rpm after passing through the 240:1 gearbox. Key specifications are listed, including torque of 125 lb-in, current of 1.67A, and power output of 7 watts or 0.0096 HP. Charts show the motor's torque and efficiency characteristics across a range of speeds. The motor is intended for continuous-duty operation and has a start/stall current of 7.31A and torque of 845.8 lb-in.
What's hot (11)
Similar to Groschopp 07103 specsheet
Groschopp 07104 specsheet
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque for starting and stalling. A graph shows the motor's torque, speed, and efficiency across different operating conditions.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque, speed, and efficiency over varying RPM ranges from 0 to 4500 RPM.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 motor with a voltage of 163V DC, speed of 2500 RPM, and output of 320 watts. It operates continuously at 2500 RPM and 10.8 lb-in of torque with an efficiency of 86.2%. It can output 111.08 lb-in of torque and draw 27.35 amps of current under start or stall conditions. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and no gearbox. Key specifications include a rating of 2500 rpm and 105 watts of output power. The motor has an efficiency of 73.2% and can produce up to 22.65 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07201 specsheet
This document provides specifications for a BL 8040 DC motor with a voltage of 163V, speed of 2500 RPM, and no gearbox. The motor has a continuous duty cycle and efficiency of 78.2%. It can output 203 watts of power at 0.27 HP. Under start or stall conditions, the motor draws 14.75 amps of current and produces 55.80 lb-in of torque. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps current and 23.24 lb-in torque. Performance charts show torque and efficiency across speed ranges from 0 to 3600 RPM. The motor is sold and serviced by Electromate.
Groschopp 01012 specsheet
This document provides specifications for a 24V DC motor with a part number of 1012, including its voltage, speed, torque, current, output, duty cycle, start/stall conditions, efficiency curve, and manufacturer contact information. The motor runs at 2655 RPM, produces 1.4 lb-in of torque, and has a continuous duty cycle with an efficiency of 66%. It requires 12.4 amps and generates 7.63 lb-in of torque under start/stall conditions.
Groschopp 01012 specsheet
This document provides specifications for a 24V DC motor with a part number of 1012, including its voltage, speed, torque, current, output, duty cycle, start/stall conditions, efficiency curve, and manufacturer contact information. The motor runs at 2655 RPM, produces 1.4 lb-in of torque, and has a continuous duty cycle with an efficiency of 66%. It requires 12.4 amps and generates 7.63 lb-in of torque under start/stall conditions.
Groschopp 01012 specsheet
The document provides specifications for a 24V DC motor with a part number of 1012, including its voltage, speed, torque, current, output, duty cycle, start/stall conditions, efficiency curve, and manufacturer contact information. The motor runs at 2655 RPM, produces 1.4 lb-in of torque, and has an efficiency of 66% across a continuous duty cycle. It draws 12.4 amps of current and produces 7.63 lb-in of torque under start/stall conditions.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Similar to Groschopp 07103 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Operating System Used by Users in day-to-day life.pptx
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Finale of the Year: Apply for Next One!
Presentation for the event called "Finale of the Year: Apply for Next One!" organized by GDSC PJATK
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Recently uploaded (20)
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Operating System Used by Users in day-to-day life.pptx
Operating System Used by Users in day-to-day life.pptx
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
Groschopp 07103 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: BL 6520 163 v DC 3700 rpm 4 Poles None Product ID: 7103 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 3677.0 rpm 1.7lb-in 0.65 amps 72 watts 0.0966 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 68.8 % 68.8 % Start/Stall Conditions: Current: Torque: 3.63 amps 10.36 lb-in Torque (lb-in) Speed RPM Efficiency 600 0 0.0 1.2 1200 2.4 1800 3.6 2400 4.8 3000 6.0 3600 7.2 4200 8.4 4800 9.6 5400 10.8 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com