Groschopp 02007 specsheet
•
0 likes•10 views
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps and torque of 44.82 lb-in. Performance curves are provided showing torque, speed, and efficiency over various operating conditions.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 01007 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 90V DC, a speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1565 RPM and 2.1 lb-in of torque at 0.66 amps of current. The motor has a continuous duty cycle and efficiency of 68%. Start/stall conditions are 2.33 amps and 8.25 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 01009 specsheet
This document provides specifications for a PM 6015 130V DC motor with a rating of 1535 RPM, 2.2 lb-in of torque, and 0.46 amps of current. The motor has no gearbox, runs continuously, and has an efficiency of 67.3%. It can produce up to 8.19 lb-in of torque at startup with 1.59 amps of current. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04101 specsheet
This document provides specifications for a 24V DC motor with a rating of 2508 RPM and 5.7 lb-in of torque. The motor draws 8.77 amps of current, has an output of 168 watts and 0.2248 HP. It has a continuous duty cycle and efficiency of 77.4% for the motor and system. Under start or stall conditions, the motor draws 66.86 amps and produces 49.38 lb-in of torque. The document also provides torque and speed curves and notes the motor is sold and serviced by Electromate.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 02009 specsheet
This document provides specifications for a PM 8014 motor with a voltage of 115V, speed of 1400 RPM, and no gearbox. Key specifications include a rating of 1400.1 RPM and 0.0673 HP at 50 watts with continuous duty cycle. Start/stall conditions are 4 amps current and 20.52 lb-in torque. A graph shows torque and efficiency levels across motor speeds ranging from 0 to 2000 RPM. The motor is sold and serviced by Electromate.
Recommended
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps and torque of 44.82 lb-in. Performance curves are provided showing torque, speed, and efficiency over various operating conditions.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 01007 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 90V DC, a speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1565 RPM and 2.1 lb-in of torque at 0.66 amps of current. The motor has a continuous duty cycle and efficiency of 68%. Start/stall conditions are 2.33 amps and 8.25 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 01009 specsheet
This document provides specifications for a PM 6015 130V DC motor with a rating of 1535 RPM, 2.2 lb-in of torque, and 0.46 amps of current. The motor has no gearbox, runs continuously, and has an efficiency of 67.3%. It can produce up to 8.19 lb-in of torque at startup with 1.59 amps of current. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04101 specsheet
This document provides specifications for a 24V DC motor with a rating of 2508 RPM and 5.7 lb-in of torque. The motor draws 8.77 amps of current, has an output of 168 watts and 0.2248 HP. It has a continuous duty cycle and efficiency of 77.4% for the motor and system. Under start or stall conditions, the motor draws 66.86 amps and produces 49.38 lb-in of torque. The document also provides torque and speed curves and notes the motor is sold and serviced by Electromate.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 02009 specsheet
This document provides specifications for a PM 8014 motor with a voltage of 115V, speed of 1400 RPM, and no gearbox. Key specifications include a rating of 1400.1 RPM and 0.0673 HP at 50 watts with continuous duty cycle. Start/stall conditions are 4 amps current and 20.52 lb-in torque. A graph shows torque and efficiency levels across motor speeds ranging from 0 to 2000 RPM. The motor is sold and serviced by Electromate.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show the motor's torque and efficiency across different speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It has a no load speed of 1027 rpm, stall torque of 52.2 lb-in, and is supplied by Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It is a 90v DC motor without a gearbox and was prepared by Groschopp.com on 02/24/14.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps producing 44.82 lb-in of torque. Performance curves show torque and speed vs. efficiency from 0-1350 RPM. The motor is sold and serviced by Electromate.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps and torque of 44.82 lb-in. Performance curves are provided showing torque, speed, and efficiency over various operating conditions.
Groschopp 04109 specsheet
This document provides specifications for a PM 8018 brushless motor with a voltage of 115V, speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1610.1 RPM and 5.1 lb-in of torque drawing 1.44 amps of current. The motor has a continuous duty cycle and efficiency of 67.7% alone or in a system. It produces maximum torque of 38.53 lb-in while drawing 7.36 amps at start or stall. A graph shows torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 04109 specsheet
This document provides specifications for a PM 8018 brushless motor with a voltage of 115V, speed of 1600 rpm, and no gearbox. Key specifications include a rating of 1610.1 rpm and 5.1 lb-in of torque drawing 1.44 amps of current. The motor has a continuous duty cycle and efficiency of 67.7% both alone and in a system. It can produce up to 38.53 lb-in of torque drawing 7.36 amps of current during start or stall conditions. Charts show torque and efficiency over a range of speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across speeds from 0 to 2000 RPM. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across different speeds. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
More Related Content
Similar to Groschopp 02007 specsheet
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show the motor's torque and efficiency across different speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It has a no load speed of 1027 rpm, stall torque of 52.2 lb-in, and is supplied by Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It is a 90v DC motor without a gearbox and was prepared by Groschopp.com on 02/24/14.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps producing 44.82 lb-in of torque. Performance curves show torque and speed vs. efficiency from 0-1350 RPM. The motor is sold and serviced by Electromate.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps and torque of 44.82 lb-in. Performance curves are provided showing torque, speed, and efficiency over various operating conditions.
Groschopp 04109 specsheet
This document provides specifications for a PM 8018 brushless motor with a voltage of 115V, speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1610.1 RPM and 5.1 lb-in of torque drawing 1.44 amps of current. The motor has a continuous duty cycle and efficiency of 67.7% alone or in a system. It produces maximum torque of 38.53 lb-in while drawing 7.36 amps at start or stall. A graph shows torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 04109 specsheet
This document provides specifications for a PM 8018 brushless motor with a voltage of 115V, speed of 1600 rpm, and no gearbox. Key specifications include a rating of 1610.1 rpm and 5.1 lb-in of torque drawing 1.44 amps of current. The motor has a continuous duty cycle and efficiency of 67.7% both alone and in a system. It can produce up to 38.53 lb-in of torque drawing 7.36 amps of current during start or stall conditions. Charts show torque and efficiency over a range of speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across speeds from 0 to 2000 RPM. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across different speeds. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Similar to Groschopp 02007 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Recently uploaded (20)
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Groschopp 02007 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 8014 90 v DC 1050 rpm 2 Poles None Product ID: 2007 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 1006.0 rpm 4.3lb-in 0.98 amps 51 watts 0.0678 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 59.7 % 59.7 % Start/Stall Conditions: Current: Torque: 3.56 amps 18.45 lb-in Constants: Ke: 65.10 v/krpm Kt: 5.50 lb-in/amp Torque (lb-in) Speed RPM Efficiency 150 0 0.0 2.0 300 4.0 450 6.0 600 8.0 750 10.0 900 12.0 1050 14.0 1200 16.0 1350 18.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com