Groschopp 07104 specsheet
•
0 likes•23 views
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque for starting and stalling. A graph shows the motor's torque, speed, and efficiency across different operating conditions.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across speeds from 0 to 2000 RPM. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02009 specsheet
This document provides specifications for a PM 8014 motor with a voltage of 115V, speed of 1400 RPM, and no gearbox. Key specifications include a rating of 1400.1 RPM and 0.0673 HP at 50 watts with continuous duty cycle. Start/stall conditions are 4 amps current and 20.52 lb-in torque. A graph shows torque and efficiency levels across motor speeds ranging from 0 to 2000 RPM. The motor is sold and serviced by Electromate.
Recommended
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across speeds from 0 to 2000 RPM. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02009 specsheet
This document provides specifications for a PM 8014 motor with a voltage of 115V, speed of 1400 RPM, and no gearbox. Key specifications include a rating of 1400.1 RPM and 0.0673 HP at 50 watts with continuous duty cycle. Start/stall conditions are 4 amps current and 20.52 lb-in torque. A graph shows torque and efficiency levels across motor speeds ranging from 0 to 2000 RPM. The motor is sold and serviced by Electromate.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 07103 specsheet
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07103 specsheet
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07201 specsheet
This document provides specifications for a BL 8040 DC motor with a voltage of 163V, speed of 2500 RPM, and no gearbox. The motor has a continuous duty cycle and efficiency of 78.2%. It can output 203 watts of power at 0.27 HP. Under start or stall conditions, the motor draws 14.75 amps of current and produces 55.80 lb-in of torque. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and output of 105 watts. The motor has a continuous duty cycle and efficiency of 73.2%. It can output up to 22.65 lb-in of torque at startup, drawing 6.58 amps of current. Performance charts show its torque and efficiency levels across a range of speeds.
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and no gearbox. Key specifications include a rating of 2500 rpm and 105 watts of output power. The motor has an efficiency of 73.2% and can produce up to 22.65 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across different speeds. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque and efficiency across motor speed ranges from 0 to 4500 RPM.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque, speed, and efficiency over varying RPM ranges from 0 to 4500 RPM.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps current and 23.24 lb-in torque. Performance charts show torque and efficiency across speed ranges from 0 to 3600 RPM. The motor is sold and serviced by Electromate.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps and 23.24 lb-in of torque. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 DC motor. It lists details such as the motor's voltage, speed, power rating, torque output, efficiency and start/stall conditions. Performance charts also show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 motor with a voltage of 163V DC, speed of 2500 RPM, and output of 320 watts. It operates continuously at 2500 RPM and 10.8 lb-in of torque with an efficiency of 86.2%. It can output 111.08 lb-in of torque and draw 27.35 amps of current under start or stall conditions. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
More Related Content
Similar to Groschopp 07104 specsheet
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 07103 specsheet
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07103 specsheet
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07201 specsheet
This document provides specifications for a BL 8040 DC motor with a voltage of 163V, speed of 2500 RPM, and no gearbox. The motor has a continuous duty cycle and efficiency of 78.2%. It can output 203 watts of power at 0.27 HP. Under start or stall conditions, the motor draws 14.75 amps of current and produces 55.80 lb-in of torque. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and output of 105 watts. The motor has a continuous duty cycle and efficiency of 73.2%. It can output up to 22.65 lb-in of torque at startup, drawing 6.58 amps of current. Performance charts show its torque and efficiency levels across a range of speeds.
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and no gearbox. Key specifications include a rating of 2500 rpm and 105 watts of output power. The motor has an efficiency of 73.2% and can produce up to 22.65 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across different speeds. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque and efficiency across motor speed ranges from 0 to 4500 RPM.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque, speed, and efficiency over varying RPM ranges from 0 to 4500 RPM.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps current and 23.24 lb-in torque. Performance charts show torque and efficiency across speed ranges from 0 to 3600 RPM. The motor is sold and serviced by Electromate.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps and 23.24 lb-in of torque. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 DC motor. It lists details such as the motor's voltage, speed, power rating, torque output, efficiency and start/stall conditions. Performance charts also show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 motor with a voltage of 163V DC, speed of 2500 RPM, and output of 320 watts. It operates continuously at 2500 RPM and 10.8 lb-in of torque with an efficiency of 86.2%. It can output 111.08 lb-in of torque and draw 27.35 amps of current under start or stall conditions. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Similar to Groschopp 07104 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Public CyberSecurity Awareness Presentation 2024.pptx
Cyber security awareness slides for a busisness by TreeTop Security
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
Recently uploaded (20)
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Public CyberSecurity Awareness Presentation 2024.pptx
Public CyberSecurity Awareness Presentation 2024.pptx
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
Groschopp 07104 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: BL 6540 163 v DC 3800 rpm 4 Poles None Product ID: 7104 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 3791.0 rpm 3.2lb-in 1.13 amps 142 watts 0.1908 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 76.4 % 76.4 % Start/Stall Conditions: Current: Torque: 8.14 amps 23.74 lb-in Torque (lb-in) Speed RPM Efficiency 600 0 0.0 2.5 1200 5.0 1800 7.5 2400 10.0 3000 12.5 3600 15.0 4200 17.5 4800 20.0 5400 22.5 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com