Groschopp 02007 specsheet
•
0 likes•14 views
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps and torque of 44.82 lb-in. Performance curves are provided showing torque, speed, and efficiency over various operating conditions.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 01007 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 90V DC, a speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1565 RPM and 2.1 lb-in of torque at 0.66 amps of current. The motor has a continuous duty cycle and efficiency of 68%. Start/stall conditions are 2.33 amps and 8.25 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 01009 specsheet
This document provides specifications for a PM 6015 130V DC motor with a rating of 1535 RPM, 2.2 lb-in of torque, and 0.46 amps of current. The motor has no gearbox, runs continuously, and has an efficiency of 67.3%. It can produce up to 8.19 lb-in of torque at startup with 1.59 amps of current. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04101 specsheet
This document provides specifications for a 24V DC motor with a rating of 2508 RPM and 5.7 lb-in of torque. The motor draws 8.77 amps of current, has an output of 168 watts and 0.2248 HP. It has a continuous duty cycle and efficiency of 77.4% for the motor and system. Under start or stall conditions, the motor draws 66.86 amps and produces 49.38 lb-in of torque. The document also provides torque and speed curves and notes the motor is sold and serviced by Electromate.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 02009 specsheet
This document provides specifications for a PM 8014 motor with a voltage of 115V, speed of 1400 RPM, and no gearbox. Key specifications include a rating of 1400.1 RPM and 0.0673 HP at 50 watts with continuous duty cycle. Start/stall conditions are 4 amps current and 20.52 lb-in torque. A graph shows torque and efficiency levels across motor speeds ranging from 0 to 2000 RPM. The motor is sold and serviced by Electromate.
Recommended
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps and torque of 44.82 lb-in. Performance curves are provided showing torque, speed, and efficiency over various operating conditions.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 01007 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 90V DC, a speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1565 RPM and 2.1 lb-in of torque at 0.66 amps of current. The motor has a continuous duty cycle and efficiency of 68%. Start/stall conditions are 2.33 amps and 8.25 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 01009 specsheet
This document provides specifications for a PM 6015 130V DC motor with a rating of 1535 RPM, 2.2 lb-in of torque, and 0.46 amps of current. The motor has no gearbox, runs continuously, and has an efficiency of 67.3%. It can produce up to 8.19 lb-in of torque at startup with 1.59 amps of current. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04101 specsheet
This document provides specifications for a 24V DC motor with a rating of 2508 RPM and 5.7 lb-in of torque. The motor draws 8.77 amps of current, has an output of 168 watts and 0.2248 HP. It has a continuous duty cycle and efficiency of 77.4% for the motor and system. Under start or stall conditions, the motor draws 66.86 amps and produces 49.38 lb-in of torque. The document also provides torque and speed curves and notes the motor is sold and serviced by Electromate.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 02009 specsheet
This document provides specifications for a PM 8014 motor with a voltage of 115V, speed of 1400 RPM, and no gearbox. Key specifications include a rating of 1400.1 RPM and 0.0673 HP at 50 watts with continuous duty cycle. Start/stall conditions are 4 amps current and 20.52 lb-in torque. A graph shows torque and efficiency levels across motor speeds ranging from 0 to 2000 RPM. The motor is sold and serviced by Electromate.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show the motor's torque and efficiency across different speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It has a no load speed of 1027 rpm, stall torque of 52.2 lb-in, and is supplied by Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It is a 90v DC motor without a gearbox and was prepared by Groschopp.com on 02/24/14.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps producing 44.82 lb-in of torque. Performance curves show torque and speed vs. efficiency from 0-1350 RPM. The motor is sold and serviced by Electromate.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps and torque of 44.82 lb-in. Performance curves are provided showing torque, speed, and efficiency over various operating conditions.
Groschopp 04109 specsheet
This document provides specifications for a PM 8018 brushless motor with a voltage of 115V, speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1610.1 RPM and 5.1 lb-in of torque drawing 1.44 amps of current. The motor has a continuous duty cycle and efficiency of 67.7% alone or in a system. It produces maximum torque of 38.53 lb-in while drawing 7.36 amps at start or stall. A graph shows torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 04109 specsheet
This document provides specifications for a PM 8018 brushless motor with a voltage of 115V, speed of 1600 rpm, and no gearbox. Key specifications include a rating of 1610.1 rpm and 5.1 lb-in of torque drawing 1.44 amps of current. The motor has a continuous duty cycle and efficiency of 67.7% both alone and in a system. It can produce up to 38.53 lb-in of torque drawing 7.36 amps of current during start or stall conditions. Charts show torque and efficiency over a range of speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across speeds from 0 to 2000 RPM. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across different speeds. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
More Related Content
Similar to Groschopp 02007 specsheet
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show the motor's torque and efficiency across different speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It has a no load speed of 1027 rpm, stall torque of 52.2 lb-in, and is supplied by Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It is a 90v DC motor without a gearbox and was prepared by Groschopp.com on 02/24/14.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps producing 44.82 lb-in of torque. Performance curves show torque and speed vs. efficiency from 0-1350 RPM. The motor is sold and serviced by Electromate.
Groschopp 04107 specsheet
This document provides specifications for a PM 8018 90V DC motor with a no-gearbox system. Key specifications include a rating of 1110 RPM and 7.7 lb-in of torque at 1.47 amps of current. The motor and system have an efficiency of 76.7% and can operate continuously with a start/stall current of 7.89 amps and torque of 44.82 lb-in. Performance curves are provided showing torque, speed, and efficiency over various operating conditions.
Groschopp 04109 specsheet
This document provides specifications for a PM 8018 brushless motor with a voltage of 115V, speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1610.1 RPM and 5.1 lb-in of torque drawing 1.44 amps of current. The motor has a continuous duty cycle and efficiency of 67.7% alone or in a system. It produces maximum torque of 38.53 lb-in while drawing 7.36 amps at start or stall. A graph shows torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 04109 specsheet
This document provides specifications for a PM 8018 brushless motor with a voltage of 115V, speed of 1600 rpm, and no gearbox. Key specifications include a rating of 1610.1 rpm and 5.1 lb-in of torque drawing 1.44 amps of current. The motor has a continuous duty cycle and efficiency of 67.7% both alone and in a system. It can produce up to 38.53 lb-in of torque drawing 7.36 amps of current during start or stall conditions. Charts show torque and efficiency over a range of speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across speeds from 0 to 2000 RPM. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across different speeds. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Similar to Groschopp 02007 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Recently uploaded (20)
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Groschopp 02007 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 8014 90 v DC 1050 rpm 2 Poles None Product ID: 2007 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 1006.0 rpm 4.3lb-in 0.98 amps 51 watts 0.0678 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 59.7 % 59.7 % Start/Stall Conditions: Current: Torque: 3.56 amps 18.45 lb-in Constants: Ke: 65.10 v/krpm Kt: 5.50 lb-in/amp Torque (lb-in) Speed RPM Efficiency 150 0 0.0 2.0 300 4.0 450 6.0 600 8.0 750 10.0 900 12.0 1050 14.0 1200 16.0 1350 18.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com