Groschopp 07201 specsheet
•
0 likes•49 views
This document provides specifications for a BL 8040 DC motor with a voltage of 163V, speed of 2500 RPM, and no gearbox. The motor has a continuous duty cycle and efficiency of 78.2%. It can output 203 watts of power at 0.27 HP. Under start or stall conditions, the motor draws 14.75 amps of current and produces 55.80 lb-in of torque. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and output of 105 watts. The motor has a continuous duty cycle and efficiency of 73.2%. It can output up to 22.65 lb-in of torque at startup, drawing 6.58 amps of current. Performance charts show its torque and efficiency levels across a range of speeds.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 DC motor. It lists details such as the motor's voltage, speed, power rating, torque output, efficiency and start/stall conditions. Performance charts also show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps and 23.24 lb-in of torque. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07104 specsheet
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque to start or stall. A graph shows the motor's torque, speed, and efficiency across different operating conditions. The motor is sold and serviced by Electromate.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque and efficiency across motor speed ranges from 0 to 4500 RPM.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Recommended
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and output of 105 watts. The motor has a continuous duty cycle and efficiency of 73.2%. It can output up to 22.65 lb-in of torque at startup, drawing 6.58 amps of current. Performance charts show its torque and efficiency levels across a range of speeds.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 DC motor. It lists details such as the motor's voltage, speed, power rating, torque output, efficiency and start/stall conditions. Performance charts also show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps and 23.24 lb-in of torque. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07104 specsheet
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque to start or stall. A graph shows the motor's torque, speed, and efficiency across different operating conditions. The motor is sold and serviced by Electromate.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque and efficiency across motor speed ranges from 0 to 4500 RPM.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 motor with a voltage of 163V DC, speed of 2500 RPM, and output of 320 watts. It operates continuously at 2500 RPM and 10.8 lb-in of torque with an efficiency of 86.2%. It can output 111.08 lb-in of torque and draw 27.35 amps of current under start or stall conditions. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps current and 23.24 lb-in torque. Performance charts show torque and efficiency across speed ranges from 0 to 3600 RPM. The motor is sold and serviced by Electromate.
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and no gearbox. Key specifications include a rating of 2500 rpm and 105 watts of output power. The motor has an efficiency of 73.2% and can produce up to 22.65 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque, speed, and efficiency over varying RPM ranges from 0 to 4500 RPM.
Groschopp 07104 specsheet
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque for starting and stalling. A graph shows the motor's torque, speed, and efficiency across different operating conditions.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 07103 specsheet
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07103 specsheet
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across speeds from 0 to 2000 RPM. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across different speeds. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com for Product ID 2001.
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
More Related Content
Similar to Groschopp 07201 specsheet
Groschopp 07202 specsheet
The document summarizes the specifications of a BL 8060 motor with a voltage of 163V DC, speed of 2500 RPM, and output of 320 watts. It operates continuously at 2500 RPM and 10.8 lb-in of torque with an efficiency of 86.2%. It can output 111.08 lb-in of torque and draw 27.35 amps of current under start or stall conditions. A graph shows the motor's torque and efficiency across different speeds. The motor is sold and serviced by Electromate.
Groschopp 07105 specsheet
This document provides specifications for a BL 6560 motor with a voltage of 163V DC, speed of 3800 RPM, and no gearbox. Key specifications include a rating of 3806 RPM, 4.7 lb-in of torque, 1.75 amps of current, and 79.3% efficiency. It also lists start/stall conditions of 13.84 amps current and 37.26 lb-in of torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07122 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2900 RPM with 4 poles and no gearbox. It has a rated speed of 2912 RPM, torque of 4.4 lb-in, current of 8.22 amps, output of 151 watts, and efficiency of 77.1%. Startup requires 40.66 amps current and 23.24 lb-in torque. Performance charts show torque and efficiency across speed ranges from 0 to 3600 RPM. The motor is sold and serviced by Electromate.
Groschopp 07200 specsheet
This document provides specifications for a BL 8020 motor with a voltage of 163V DC, speed of 2500 rpm, and no gearbox. Key specifications include a rating of 2500 rpm and 105 watts of output power. The motor has an efficiency of 73.2% and can produce up to 22.65 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency levels across a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 07120 specsheet
This document provides specifications for a BL 6520 24V DC motor. The motor runs at 2600 RPM, has a torque of 1.9 lb-in, draws 3.75 amps of current, and has a continuous duty cycle and efficiency of 62.1%. It also lists start/stall conditions of 14.11 amps and 7.91 lb-in of torque. Performance charts show torque, speed, and efficiency over varying RPM ranges from 0 to 4500 RPM.
Groschopp 07104 specsheet
The document provides specifications for a BL 6540 motor with a voltage of 163V DC, speed of 3800 RPM, and output of 142 watts and 0.1908 HP. The motor runs continuously at 3791 RPM and 3.2 lb-in of torque with an efficiency of 76.4%. It requires 8.14 amps and 23.74 lb-in of torque for starting and stalling. A graph shows the motor's torque, speed, and efficiency across different operating conditions.
Groschopp 07121 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2,888 RPM and produces 3.3 lb-in of torque while drawing 5.94 amps of current. It has an output of 111 watts or 0.1489 horsepower. The motor has a continuous duty cycle and efficiency of 76.1% both on its own and as part of a system. It requires 31.91 amps and can produce 19.06 lb-in of torque under start or stall conditions. A chart shows the motor's torque and efficiency levels across a range of speeds.
Groschopp 07103 specsheet
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 07103 specsheet
This document provides specifications for a BL 6520 motor with a voltage of 163V DC, speed of 3700 RPM, and no gearbox. The motor has a rated speed of 3677 RPM, torque of 1.7 lb-in, current of 0.65 amps, output of 72 watts, and efficiency of 68.8%. It also lists start/stall conditions of 3.63 amps current and 10.36 lb-in torque. A graph shows torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 02010 specsheet
This document summarizes the specifications of a PM 8014 motor that operates at 130V DC with a maximum speed of 1700 RPM. The motor has a rated speed of 1692 RPM, torque of 3.8 lb-in, current of 0.85 amps, output power of 75 watts, and efficiency of 69.4%. It can operate continuously with a start/stall current of 4.9 amps and torque of 25.12 lb-in. Charts show the motor's torque and efficiency curves across a range of speeds. The motor has no gearbox and was tested for specifications by Groschopp.com.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across speeds from 0 to 2000 RPM. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 04110 specsheet
This document provides specifications for a PM 8018 130V DC motor with a rating of 1974 RPM, 6.5 lb-in of torque, and 151 watts of output power. The motor has a continuous duty cycle and efficiency of 73.5%. It can produce up to 9.89 amps of current and 44 lb-in of torque during start or stall conditions. Charts show the motor's torque and efficiency across different speeds. The motor has no gearbox and was prepared by Groschopp.com for product ID 4110.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com for Product ID 2001.
Similar to Groschopp 07201 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Recently uploaded (20)
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Groschopp 07201 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: BL 8040 163 v DC 2500 rpm 4 Poles None Product ID: 7201 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 2500.0 rpm 6.9lb-in 1.86 amps 203 watts 0.2727 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 78.2 % 78.2 % Start/Stall Conditions: Current: Torque: 14.75 amps 55.80 lb-in CHECK AVAILIBILITY Torque (lb-in) Speed RPM Efficiency 400 0 0.0 6.0 800 12.0 1200 18.0 1600 24.0 2000 30.0 2400 36.0 2800 42.0 3200 48.0 3600 54.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com