Groschopp 05126 specsheet
•
0 likes•26 views
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specifications include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency and torque curves versus speed in both cold and hot conditions.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05154 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 2580 rpm. Key specifications include a rating of 2582.3 rpm and 1.0 lb-in of torque at 0.33 amps of current and 32 watts of output power. Charts show torque and efficiency curves for the motor when cold and hot.
Groschopp 05317 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a rating of 2614.4 rpm, 0.1180 HP, and 88 watts of output power. The motor runs at 2610 rpm on 230v 50Hz power and has a maximum torque of 4.27 lb-in. Charts show the motor's speed and efficiency at different torque levels both when cold and hot.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under any load conditions.
Groschopp 05134 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2905.9 rpm, torque of 1.5 lb-in, current of 0.49 amps, output power of 50 watts, and efficiency of 47.2%. Startup conditions include a current of 0.96 amps and torque of 1.37 lb-in. A graph shows efficiency and speed at varying torque levels from 0 to 3200 rpm.
Groschopp 05309 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, 50Hz, and speed of 2570rpm. The motor has an output of 62 watts, 0.0828 horsepower, and torque of 2.0lb-in at its rated speed of 2567rpm. Charts show its torque and efficiency at varying speeds when cold and hot.
Groschopp 05316 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 230V, speed of 3130 rpm, and no gearbox. Key specifications include a rating of 3126.6 rpm at 2.6lb-in of torque drawing 0.72 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot, with maximum efficiency of 61.8%. Start/stall conditions draw 1.37 amps at 2.2 lb-in of torque.
Groschopp 05136 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a voltage of 230V and speed of 1570 rpm. The motor has a rating of 1569.7 rpm and 1.4 lb-in of torque drawing 0.31 amps of current and producing 27 watts of output power equivalent to 0.0357 HP. The motor has a continuous duty cycle with peak efficiency of 34.4% and can produce up to 2.51 lb-in of torque when starting or stalling, drawing 0.59 amps of current. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Recommended
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05154 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 2580 rpm. Key specifications include a rating of 2582.3 rpm and 1.0 lb-in of torque at 0.33 amps of current and 32 watts of output power. Charts show torque and efficiency curves for the motor when cold and hot.
Groschopp 05317 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a rating of 2614.4 rpm, 0.1180 HP, and 88 watts of output power. The motor runs at 2610 rpm on 230v 50Hz power and has a maximum torque of 4.27 lb-in. Charts show the motor's speed and efficiency at different torque levels both when cold and hot.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under any load conditions.
Groschopp 05134 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2905.9 rpm, torque of 1.5 lb-in, current of 0.49 amps, output power of 50 watts, and efficiency of 47.2%. Startup conditions include a current of 0.96 amps and torque of 1.37 lb-in. A graph shows efficiency and speed at varying torque levels from 0 to 3200 rpm.
Groschopp 05309 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, 50Hz, and speed of 2570rpm. The motor has an output of 62 watts, 0.0828 horsepower, and torque of 2.0lb-in at its rated speed of 2567rpm. Charts show its torque and efficiency at varying speeds when cold and hot.
Groschopp 05316 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 230V, speed of 3130 rpm, and no gearbox. Key specifications include a rating of 3126.6 rpm at 2.6lb-in of torque drawing 0.72 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot, with maximum efficiency of 61.8%. Start/stall conditions draw 1.37 amps at 2.2 lb-in of torque.
Groschopp 05136 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a voltage of 230V and speed of 1570 rpm. The motor has a rating of 1569.7 rpm and 1.4 lb-in of torque drawing 0.31 amps of current and producing 27 watts of output power equivalent to 0.0357 HP. The motor has a continuous duty cycle with peak efficiency of 34.4% and can produce up to 2.51 lb-in of torque when starting or stalling, drawing 0.59 amps of current. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 05318 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, speed of 3000 rpm, and no gearbox. Key specifications include a rated speed of 3000.6 rpm, torque of 4.5lb-in, current of 1.30 amps, output of 161 watts, and efficiency of 57.1%. A graph shows efficiency and speed versus torque from 0 to 3600 rpm.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show the motor's speed and torque characteristics when cold and hot, with torque ranging from 0 to 1.4 lb-in over 0 to 1800 rpm.
Groschopp 05312 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 115V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3092.5 rpm and 0.1374 HP at 64.6% efficiency. Performance charts show speed, torque, current and efficiency at varying torque levels from start up to full speed. It is intended for continuous duty and has a 18uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v and 60Hz with a speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and a torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show its torque and efficiency characteristics at different speeds when cold and hot.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v 60Hz with a maximum speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show torque and efficiency curves for the motor under cold and hot operating conditions.
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05154 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 2580 rpm. Key specifications include a rating of 2582.3 rpm and 1.0 lb-in of torque at 0.33 amps and 32 watts of output. Breakdown and pullup tests were also performed. The motor has a continuous duty cycle and system efficiency of 47.6%. Start/stall conditions are 0.66 amps and 0.83 lb-in of torque. A graph shows efficiency versus torque from 0-2700 rpm. Notes indicate a 4uF 440V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under start/stall conditions of 0.52 amps and 2.39 lb-in of torque.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. Startup requires 0.40 amps of current producing 2.55 lb-in of torque. A graph shows efficiency decreases with speed above 750 rpm.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. It produces higher current and torque under start or stall conditions. A graph shows efficiency decreases with increasing torque from a peak of 90% at lower torques.
Groschopp 05134 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2905.9 rpm, torque of 1.5 lb-in, current of 0.49 amps, output power of 50 watts, and efficiency of 47.2%. Startup conditions include a current of 0.96 amps and torque of 1.37 lb-in. A graph shows efficiency and speed at varying torque levels from 0 to 3200 rpm.
Groschopp 05122 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 1490 rpm, and no gearbox. Key specifications include a rated speed of 1491.8 rpm, torque of 1.0 lb-in, current of 0.49 amps, output power of 17 watts, and output horsepower of 0.0227 HP. The motor has a breakdown speed of 1024.29 rpm, pullup torque of 1.06 lb-in, and continuous duty cycle. Start/stall conditions are a current of 0.71 amps and torque of 1.06 lb-in. A graph shows efficiency levels between 0-1600 rpm.
Groschopp 05122 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 1490 rpm, and no gearbox. Key specifications include a rated speed of 1491.8 rpm, torque of 1.0 lb-in, current of 0.49 amps, output power of 17 watts, and output horsepower of 0.0227 HP. The motor has a breakdown speed of 1024.29 rpm, pullup torque of 1.06 lb-in, and continuous duty cycle. Start/stall conditions are a current of 0.71 amps and torque of 1.06 lb-in. A graph shows efficiency levels between 0-1600 rpm.
Groschopp 05159 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 50Hz, and speed of 2710rpm without a gearbox. Key specifications include a rating of 2710rpm and 1.5lb-in of torque at 0.34amps and 48watts of output, or 0.0645HP. Breakdown and pullup torque and speed are also listed, along with duty cycle, efficiency ratings, start/stall conditions, and a graph of torque vs speed and efficiency when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 05159 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 50Hz, and speed of 2710rpm without a gearbox. Key specifications include a rating of 2710rpm and 1.5lb-in of torque at 0.34amps and 48watts of output, or 0.0645HP. Breakdown and pullup torque and speed are also listed, along with duty cycle, efficiency curves, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05136 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a voltage of 230V and speed of 1570 rpm. Key specifications include a rating of 1569.7 rpm and 1.4 lb-in of torque drawing 0.31 amps of current. The motor produces 27 watts of output power and 0.0357 HP. Startup conditions draw 0.59 amps with maximum torque of 2.51 lb-in. Efficiency is shown to vary from 10-90% over torque ranges from 0.3-2.4 lb-in. The motor has a continuous duty cycle and is sold and serviced by Electromate.
Groschopp 05312 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 115V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3092.5 rpm and 0.1374 HP at 64.6% efficiency. Performance charts show speed, torque, current and efficiency at varying torque levels from start up to full speed. It is intended for continuous duty and has a 18uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show its torque and efficiency characteristics at different speeds both when cold and hot.
Groschopp 05316 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 230V, speed of 3130 rpm, and no gearbox. Key specifications include a rating of 3126.6 rpm at 2.6lb-in of torque drawing 0.72 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot, with maximum efficiency of 61.8%. Start/stall conditions draw 1.37 amps at 2.2 lb-in of torque.
More Related Content
What's hot
Groschopp 05318 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, speed of 3000 rpm, and no gearbox. Key specifications include a rated speed of 3000.6 rpm, torque of 4.5lb-in, current of 1.30 amps, output of 161 watts, and efficiency of 57.1%. A graph shows efficiency and speed versus torque from 0 to 3600 rpm.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show the motor's speed and torque characteristics when cold and hot, with torque ranging from 0 to 1.4 lb-in over 0 to 1800 rpm.
Groschopp 05312 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 115V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3092.5 rpm and 0.1374 HP at 64.6% efficiency. Performance charts show speed, torque, current and efficiency at varying torque levels from start up to full speed. It is intended for continuous duty and has a 18uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v and 60Hz with a speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and a torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show its torque and efficiency characteristics at different speeds when cold and hot.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
What's hot (6)
Similar to Groschopp 05126 specsheet
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v 60Hz with a maximum speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show torque and efficiency curves for the motor under cold and hot operating conditions.
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05154 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 2580 rpm. Key specifications include a rating of 2582.3 rpm and 1.0 lb-in of torque at 0.33 amps and 32 watts of output. Breakdown and pullup tests were also performed. The motor has a continuous duty cycle and system efficiency of 47.6%. Start/stall conditions are 0.66 amps and 0.83 lb-in of torque. A graph shows efficiency versus torque from 0-2700 rpm. Notes indicate a 4uF 440V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under start/stall conditions of 0.52 amps and 2.39 lb-in of torque.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. Startup requires 0.40 amps of current producing 2.55 lb-in of torque. A graph shows efficiency decreases with speed above 750 rpm.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. It produces higher current and torque under start or stall conditions. A graph shows efficiency decreases with increasing torque from a peak of 90% at lower torques.
Groschopp 05134 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2905.9 rpm, torque of 1.5 lb-in, current of 0.49 amps, output power of 50 watts, and efficiency of 47.2%. Startup conditions include a current of 0.96 amps and torque of 1.37 lb-in. A graph shows efficiency and speed at varying torque levels from 0 to 3200 rpm.
Groschopp 05122 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 1490 rpm, and no gearbox. Key specifications include a rated speed of 1491.8 rpm, torque of 1.0 lb-in, current of 0.49 amps, output power of 17 watts, and output horsepower of 0.0227 HP. The motor has a breakdown speed of 1024.29 rpm, pullup torque of 1.06 lb-in, and continuous duty cycle. Start/stall conditions are a current of 0.71 amps and torque of 1.06 lb-in. A graph shows efficiency levels between 0-1600 rpm.
Groschopp 05122 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 1490 rpm, and no gearbox. Key specifications include a rated speed of 1491.8 rpm, torque of 1.0 lb-in, current of 0.49 amps, output power of 17 watts, and output horsepower of 0.0227 HP. The motor has a breakdown speed of 1024.29 rpm, pullup torque of 1.06 lb-in, and continuous duty cycle. Start/stall conditions are a current of 0.71 amps and torque of 1.06 lb-in. A graph shows efficiency levels between 0-1600 rpm.
Groschopp 05159 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 50Hz, and speed of 2710rpm without a gearbox. Key specifications include a rating of 2710rpm and 1.5lb-in of torque at 0.34amps and 48watts of output, or 0.0645HP. Breakdown and pullup torque and speed are also listed, along with duty cycle, efficiency ratings, start/stall conditions, and a graph of torque vs speed and efficiency when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 05159 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 50Hz, and speed of 2710rpm without a gearbox. Key specifications include a rating of 2710rpm and 1.5lb-in of torque at 0.34amps and 48watts of output, or 0.0645HP. Breakdown and pullup torque and speed are also listed, along with duty cycle, efficiency curves, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05136 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a voltage of 230V and speed of 1570 rpm. Key specifications include a rating of 1569.7 rpm and 1.4 lb-in of torque drawing 0.31 amps of current. The motor produces 27 watts of output power and 0.0357 HP. Startup conditions draw 0.59 amps with maximum torque of 2.51 lb-in. Efficiency is shown to vary from 10-90% over torque ranges from 0.3-2.4 lb-in. The motor has a continuous duty cycle and is sold and serviced by Electromate.
Groschopp 05312 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 115V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3092.5 rpm and 0.1374 HP at 64.6% efficiency. Performance charts show speed, torque, current and efficiency at varying torque levels from start up to full speed. It is intended for continuous duty and has a 18uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show its torque and efficiency characteristics at different speeds both when cold and hot.
Groschopp 05316 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 230V, speed of 3130 rpm, and no gearbox. Key specifications include a rating of 3126.6 rpm at 2.6lb-in of torque drawing 0.72 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot, with maximum efficiency of 61.8%. Start/stall conditions draw 1.37 amps at 2.2 lb-in of torque.
Groschopp 05139 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3200rpm without a gearbox. Key specifications include a rating of 3200rpm and 1.6lb-in of torque at 0.38amps and 62watts of output or 0.0829HP. Breakdown and pullup torque and speed are also listed along with duty cycle, efficiency curves, start/stall conditions, and contact information for the distributor.
Groschopp 05139 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3200rpm without a gearbox. Key specifications include a rating of 3200rpm and 1.6lb-in of torque at 0.38amps and 62watts of output or 0.0829HP. Breakdown and pullup torque and speed are also listed along with duty cycle, efficiency curves, start/stall conditions, and contact information for the distributor.
Groschopp 05128 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 1490 rpm, and no gearbox. Key specifications include a rating of 1493.1 rpm and 1.0 lb-in of torque drawing 0.33 amps of current. Performance tests found a breakdown speed of 1015.34 rpm and pullup speed of 0 rpm. The motor has a continuous duty cycle and system efficiency of 28.6%. Startup requires 0.43 amps and produces 1.27 lb-in of torque. A graph shows efficiency decreases with increasing torque from 90% at 0 rpm to 20% at 1600 rpm.
Groschopp 05128 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 1490 rpm, and output of 18 watts. Key specifications include a rating of 1493.1 rpm and 1.0 lb-in of torque at 0.33 amps of current. The motor has a breakdown speed of 1015.34 rpm and pullup torque of 1.27lb-in. It has a continuous duty cycle and system efficiency of 28.6%. Start/stall conditions are 0.43 amps and 1.27 lb-in of torque. A graph shows efficiency versus torque from 0 to 1600 rpm. It is sold and serviced by Electromate.
Similar to Groschopp 05126 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Securing your Kubernetes cluster_ a step-by-step guide to success !
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsAlt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
Recently uploaded (20)
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Securing your Kubernetes cluster_ a step-by-step guide to success !
Securing your Kubernetes cluster_ a step-by-step guide to success !
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Groschopp 05126 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 1 Ph 6540 TENV 115 v 60 Hz 3150 rpm 2 Poles None Product ID: 5126 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 3152.3 rpm 1.1lb-in 0.69 amps 41 watts 0.0549 HP Breakdown (Cold): Speed: Torque: 2462.14 rpm 1.65 lb-in Pullup (Cold): Speed: Torque: 0.0 rpm 0.93lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 52.6 % 52.6 % Start/Stall Conditions: Current: Torque: 1.58 amps 0.93 lb-in Torque (lb-in) Speed RPM Efficiency 400 0 0.0 0.2 800 0.4 1200 0.6 1600 0.8 2000 1.0 2400 1.2 2800 1.4 3200 1.6 3600 1.8 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Capacitor - 16uF 250V Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com