Groschopp 05122 specsheet
•
0 likes•33 views
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 1490 rpm, and no gearbox. Key specifications include a rated speed of 1491.8 rpm, torque of 1.0 lb-in, current of 0.49 amps, output power of 17 watts, and output horsepower of 0.0227 HP. The motor has a breakdown speed of 1024.29 rpm, pullup torque of 1.06 lb-in, and continuous duty cycle. Start/stall conditions are a current of 0.71 amps and torque of 1.06 lb-in. A graph shows efficiency levels between 0-1600 rpm.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 05128 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 1490 rpm, and no gearbox. Key specifications include a rating of 1493.1 rpm and 1.0 lb-in of torque drawing 0.33 amps of current. Performance tests found a breakdown speed of 1015.34 rpm and pullup speed of 0 rpm. The motor has a continuous duty cycle and system efficiency of 28.6%. Startup requires 0.43 amps and produces 1.27 lb-in of torque. A graph shows efficiency decreases with increasing torque from 90% at 0 rpm to 20% at 1600 rpm.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show the motor's speed and torque characteristics when cold and hot, with torque ranging from 0 to 1.4 lb-in over 0 to 1800 rpm.
Groschopp 05148 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1190 rpm. Key specifications include a rating of 1189.4 rpm and 1.1 lb-in of torque drawing 0.31 amps of current. Performance tests found breakdown torque of 1.59 lb-in at 790.15 rpm and start/stall torque of 1.37 lb-in drawing 0.39 amps. A graph shows efficiency peaks at 25.4% between 450-1050 rpm. It has a 3.5uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05136 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a voltage of 230V and speed of 1570 rpm. The motor has a rating of 1569.7 rpm and 1.4 lb-in of torque drawing 0.31 amps of current and producing 27 watts of output power equivalent to 0.0357 HP. The motor has a continuous duty cycle with peak efficiency of 34.4% and can produce up to 2.51 lb-in of torque when starting or stalling, drawing 0.59 amps of current. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. It produces higher current and torque under start or stall conditions. A graph shows efficiency decreases with increasing torque from a peak of 90% at lower torques.
Groschopp 05120 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 115V, speed of 1480 rpm, and no gearbox. Key specifications include a rated speed of 1483 rpm, torque of 1.1 lb-in, current of 0.64 amps, output of 20 watts, and efficiency of 30.6%. Performance data is provided showing torque and speed curves for cold and hot operation.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v and 60Hz with a speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and a torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show its torque and efficiency characteristics at different speeds when cold and hot.
Recommended
Groschopp 05128 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 1490 rpm, and no gearbox. Key specifications include a rating of 1493.1 rpm and 1.0 lb-in of torque drawing 0.33 amps of current. Performance tests found a breakdown speed of 1015.34 rpm and pullup speed of 0 rpm. The motor has a continuous duty cycle and system efficiency of 28.6%. Startup requires 0.43 amps and produces 1.27 lb-in of torque. A graph shows efficiency decreases with increasing torque from 90% at 0 rpm to 20% at 1600 rpm.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show the motor's speed and torque characteristics when cold and hot, with torque ranging from 0 to 1.4 lb-in over 0 to 1800 rpm.
Groschopp 05148 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1190 rpm. Key specifications include a rating of 1189.4 rpm and 1.1 lb-in of torque drawing 0.31 amps of current. Performance tests found breakdown torque of 1.59 lb-in at 790.15 rpm and start/stall torque of 1.37 lb-in drawing 0.39 amps. A graph shows efficiency peaks at 25.4% between 450-1050 rpm. It has a 3.5uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05136 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a voltage of 230V and speed of 1570 rpm. The motor has a rating of 1569.7 rpm and 1.4 lb-in of torque drawing 0.31 amps of current and producing 27 watts of output power equivalent to 0.0357 HP. The motor has a continuous duty cycle with peak efficiency of 34.4% and can produce up to 2.51 lb-in of torque when starting or stalling, drawing 0.59 amps of current. Performance charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. It produces higher current and torque under start or stall conditions. A graph shows efficiency decreases with increasing torque from a peak of 90% at lower torques.
Groschopp 05120 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 115V, speed of 1480 rpm, and no gearbox. Key specifications include a rated speed of 1483 rpm, torque of 1.1 lb-in, current of 0.64 amps, output of 20 watts, and efficiency of 30.6%. Performance data is provided showing torque and speed curves for cold and hot operation.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v and 60Hz with a speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and a torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show its torque and efficiency characteristics at different speeds when cold and hot.
Groschopp 05126 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specifications include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency and torque curves versus speed in both cold and hot conditions.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under any load conditions.
Groschopp 05134 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2905.9 rpm, torque of 1.5 lb-in, current of 0.49 amps, output power of 50 watts, and efficiency of 47.2%. Startup conditions include a current of 0.96 amps and torque of 1.37 lb-in. A graph shows efficiency and speed at varying torque levels from 0 to 3200 rpm.
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05152 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, 50Hz, and speed of 2430rpm. The motor has a rating of 2425.3rpm and 1.5lb-in of torque while drawing 0.47amps and producing 42watts and 0.0560HP of output. Breakdown and pullup tests were also performed. Efficiency is listed for various torque levels. The motor is intended for continuous duty and has a startup current of 0.82amps and stall torque of 1.40lb-in. Contact information is provided for the distributor Electromate.
Groschopp 05300 specsheet
The document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1350 rpm and 5.1 lb-in of torque. It lists various performance metrics like breakdown torque, pullup torque, start/stall conditions, and efficiency curves across a range of torques and speeds. The motor has a continuous duty cycle and 59.1% efficiency. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v 60Hz with a maximum speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show torque and efficiency curves for the motor under cold and hot operating conditions.
Groschopp 05126 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specs include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency versus torque and speed.
Groschopp 04308 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1631 rpm, 9 lb-in of torque, and continuous duty cycle. The motor operates at 130V DC with a no-load speed of 1650 rpm and has an efficiency of 80%. Startup requires 10.86 amps of current and 65 lb-in of torque. Performance curves show torque and efficiency across a range of speeds from 0 to 1800 rpm.
Groschopp 05120 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 115V, speed of 1480 rpm, and no gearbox. Key specifications include a rated speed of 1483 rpm, torque of 1.1 lb-in, current of 0.64 amps, output of 20 watts, and efficiency of 30.6%. Performance data is provided showing torque and speed curves for cold and hot operation.
Groschopp 04309 specsheet
This document provides specifications for a PM 10816 motor with a voltage of 130V DC, speed of 2400 rpm, and no gearbox. Key specifications include a rating of 2413 rpm and 8.6 lb-in of torque drawing 2.20 amps of current. Start/stall conditions are 18.88 amps and 80 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency at various rpm. The motor has an efficiency of 81.9% and is intended for continuous duty applications.
Groschopp 04310 specsheet
The document provides specifications for a PM 10816 motor with a voltage of 180V DC, speed of 2400 rpm, and no gearbox. Key specifications include a rating of 2384 rpm and 8.3 lb-in of torque drawing 1.49 amps of current. The motor has a continuous duty cycle and efficiency of 82.6% both alone and in a system. It can produce up to 80 lb-in of torque when drawing 13.4 amps of current during start or stall conditions. Performance charts show torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Eleições 2014 - Resultado final dos deputados federais eleitos na Paraíba.
Este documento apresenta os resultados preliminares da eleição para deputado federal na Paraíba no primeiro turno de 2014. A coligação "A Vontade do Povo" obteve 6 vagas, com Pedro Cunha Lima recebendo o maior número de votos. A coligação "A Força do Trabalho" conquistou 3 vagas, liderada por Efraim Filho. A coligação "Renovação de Verdade" também conquistou 3 vagas, com Veneziano recebendo o maior apoio.
Library Quest: Attain the Library Maven Badge
This document outlines 5 tasks for a library quest to earn a LIBRARY MAVEN BADGE: 1) Find a book using the university catalog, 2) Locate the book in the stacks, 3) Create a bibliographic citation and short explanation of the author for a book about Athens' architecture, 4) Note the call number for a book with a space where you'd like to write, 5) Take a picture of such a space from the book. Completing these tasks involves using library resources like the catalog, stacks and scanners to explore books and find inspiration.
Vencendo os gigantes
O documento discute como vencer os desafios da vida através do exemplo bíblico de Davi vencendo o gigante Golias. Aponta cinco lições: 1) Não escutar a voz do pessimismo; 2) Triunfar sobre as críticas; 3) Ser autêntico e não usar armas alheias; 4) Ter determinação para vencer; 5) Reconhecer que a vitória vem de Deus. Conclui dizendo que outros desafios virão, mas com Deus é possível sempre vencer.
RESUMEN ANALISIS NUMERICO. Wuillians lemus 24873349
El documento explica conceptos clave del análisis numérico como números de máquinas, errores absolutos y relativos, fuentes principales de errores como el truncamiento y redondeo, y cómo los errores de suma y resta se acumulan con cada cálculo. También describe que el análisis numérico involucra aplicar aritmética para resolver problemas a través de cálculos y que existe un porcentaje de error dependiendo de la máquina o persona que realiza los cálculos.
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show its torque and efficiency characteristics at different speeds both when cold and hot.
Groschopp 05128 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 1490 rpm, and output of 18 watts. Key specifications include a rating of 1493.1 rpm and 1.0 lb-in of torque at 0.33 amps of current. The motor has a breakdown speed of 1015.34 rpm and pullup torque of 1.27lb-in. It has a continuous duty cycle and system efficiency of 28.6%. Start/stall conditions are 0.43 amps and 1.27 lb-in of torque. A graph shows efficiency versus torque from 0 to 1600 rpm. It is sold and serviced by Electromate.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05136 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a voltage of 230V and speed of 1570 rpm. Key specifications include a rating of 1569.7 rpm and 1.4 lb-in of torque drawing 0.31 amps of current. The motor produces 27 watts of output power and 0.0357 HP. Startup conditions draw 0.59 amps with maximum torque of 2.51 lb-in. Efficiency is shown to vary from 10-90% over torque ranges from 0.3-2.4 lb-in. The motor has a continuous duty cycle and is sold and serviced by Electromate.
More Related Content
What's hot
Groschopp 05126 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specifications include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency and torque curves versus speed in both cold and hot conditions.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under any load conditions.
Groschopp 05134 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2905.9 rpm, torque of 1.5 lb-in, current of 0.49 amps, output power of 50 watts, and efficiency of 47.2%. Startup conditions include a current of 0.96 amps and torque of 1.37 lb-in. A graph shows efficiency and speed at varying torque levels from 0 to 3200 rpm.
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05152 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, 50Hz, and speed of 2430rpm. The motor has a rating of 2425.3rpm and 1.5lb-in of torque while drawing 0.47amps and producing 42watts and 0.0560HP of output. Breakdown and pullup tests were also performed. Efficiency is listed for various torque levels. The motor is intended for continuous duty and has a startup current of 0.82amps and stall torque of 1.40lb-in. Contact information is provided for the distributor Electromate.
Groschopp 05300 specsheet
The document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1350 rpm and 5.1 lb-in of torque. It lists various performance metrics like breakdown torque, pullup torque, start/stall conditions, and efficiency curves across a range of torques and speeds. The motor has a continuous duty cycle and 59.1% efficiency. It was prepared by Groschopp.com and is available from Electromate.
What's hot (6)
Viewers also liked
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v 60Hz with a maximum speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show torque and efficiency curves for the motor under cold and hot operating conditions.
Groschopp 05126 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specs include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency versus torque and speed.
Groschopp 04308 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1631 rpm, 9 lb-in of torque, and continuous duty cycle. The motor operates at 130V DC with a no-load speed of 1650 rpm and has an efficiency of 80%. Startup requires 10.86 amps of current and 65 lb-in of torque. Performance curves show torque and efficiency across a range of speeds from 0 to 1800 rpm.
Groschopp 05120 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 115V, speed of 1480 rpm, and no gearbox. Key specifications include a rated speed of 1483 rpm, torque of 1.1 lb-in, current of 0.64 amps, output of 20 watts, and efficiency of 30.6%. Performance data is provided showing torque and speed curves for cold and hot operation.
Groschopp 04309 specsheet
This document provides specifications for a PM 10816 motor with a voltage of 130V DC, speed of 2400 rpm, and no gearbox. Key specifications include a rating of 2413 rpm and 8.6 lb-in of torque drawing 2.20 amps of current. Start/stall conditions are 18.88 amps and 80 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency at various rpm. The motor has an efficiency of 81.9% and is intended for continuous duty applications.
Groschopp 04310 specsheet
The document provides specifications for a PM 10816 motor with a voltage of 180V DC, speed of 2400 rpm, and no gearbox. Key specifications include a rating of 2384 rpm and 8.3 lb-in of torque drawing 1.49 amps of current. The motor has a continuous duty cycle and efficiency of 82.6% both alone and in a system. It can produce up to 80 lb-in of torque when drawing 13.4 amps of current during start or stall conditions. Performance charts show torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Eleições 2014 - Resultado final dos deputados federais eleitos na Paraíba.
Este documento apresenta os resultados preliminares da eleição para deputado federal na Paraíba no primeiro turno de 2014. A coligação "A Vontade do Povo" obteve 6 vagas, com Pedro Cunha Lima recebendo o maior número de votos. A coligação "A Força do Trabalho" conquistou 3 vagas, liderada por Efraim Filho. A coligação "Renovação de Verdade" também conquistou 3 vagas, com Veneziano recebendo o maior apoio.
Library Quest: Attain the Library Maven Badge
This document outlines 5 tasks for a library quest to earn a LIBRARY MAVEN BADGE: 1) Find a book using the university catalog, 2) Locate the book in the stacks, 3) Create a bibliographic citation and short explanation of the author for a book about Athens' architecture, 4) Note the call number for a book with a space where you'd like to write, 5) Take a picture of such a space from the book. Completing these tasks involves using library resources like the catalog, stacks and scanners to explore books and find inspiration.
Vencendo os gigantes
O documento discute como vencer os desafios da vida através do exemplo bíblico de Davi vencendo o gigante Golias. Aponta cinco lições: 1) Não escutar a voz do pessimismo; 2) Triunfar sobre as críticas; 3) Ser autêntico e não usar armas alheias; 4) Ter determinação para vencer; 5) Reconhecer que a vitória vem de Deus. Conclui dizendo que outros desafios virão, mas com Deus é possível sempre vencer.
RESUMEN ANALISIS NUMERICO. Wuillians lemus 24873349
El documento explica conceptos clave del análisis numérico como números de máquinas, errores absolutos y relativos, fuentes principales de errores como el truncamiento y redondeo, y cómo los errores de suma y resta se acumulan con cada cálculo. También describe que el análisis numérico involucra aplicar aritmética para resolver problemas a través de cálculos y que existe un porcentaje de error dependiendo de la máquina o persona que realiza los cálculos.
Viewers also liked (12)
Eleições 2014 - Resultado final dos deputados federais eleitos na Paraíba.
Eleições 2014 - Resultado final dos deputados federais eleitos na Paraíba.
RESUMEN ANALISIS NUMERICO. Wuillians lemus 24873349
RESUMEN ANALISIS NUMERICO. Wuillians lemus 24873349
Similar to Groschopp 05122 specsheet
Groschopp 05130 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, speed of 1500 rpm, output of 15 watts, and efficiency of 31.4%. The motor draws 0.25 amps of current at full speed of 1495.5 rpm and generates 0.8 lb-in of torque. Charts show its torque and efficiency characteristics at different speeds both when cold and hot.
Groschopp 05128 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 1490 rpm, and output of 18 watts. Key specifications include a rating of 1493.1 rpm and 1.0 lb-in of torque at 0.33 amps of current. The motor has a breakdown speed of 1015.34 rpm and pullup torque of 1.27lb-in. It has a continuous duty cycle and system efficiency of 28.6%. Start/stall conditions are 0.43 amps and 1.27 lb-in of torque. A graph shows efficiency versus torque from 0 to 1600 rpm. It is sold and serviced by Electromate.
Groschopp 05150 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, 50Hz, and speed of 1220 rpm. Key specifications include a rating of 1215.2 rpm at 0.8 lb-in of torque drawing 0.23 amps of current. Charts show torque and efficiency at various speeds both when cold and hot. The motor has a continuous duty cycle and efficiency of 26.2%. It stalls at 0.30 amps and 0.97 lb-in of torque.
Groschopp 05136 specsheet
The document provides specifications for an AC 3 Phase 6540 TEFC motor with a voltage of 230V and speed of 1570 rpm. Key specifications include a rating of 1569.7 rpm and 1.4 lb-in of torque drawing 0.31 amps of current. The motor produces 27 watts of output power and 0.0357 HP. Startup conditions draw 0.59 amps with maximum torque of 2.51 lb-in. Efficiency is shown to vary from 10-90% over torque ranges from 0.3-2.4 lb-in. The motor has a continuous duty cycle and is sold and serviced by Electromate.
Groschopp 05148 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1190 rpm. Key specifications include a rating of 1189.4 rpm and 1.1 lb-in of torque drawing 0.31 amps of current. Performance tests found breakdown torque of 1.59 lb-in at 790.15 rpm and start/stall torque of 1.37 lb-in drawing 0.39 amps. A graph shows efficiency peaks at 25.4% between 450-1050 rpm. It has a 3.5uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Performance charts show torque and speed values at various RPMs as well as efficiency curves for cold and hot operation.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Start/stall conditions are listed as 1.34 amps current and 2.28 lb-in torque. A graph shows efficiency and speed versus torque from 0 to 1800 rpm. Notes indicate a 10uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05137 specsheet
The document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1563.8 rpm and 1.2lb-in of torque consuming 0.25 amps of current. The motor produces 23 watts of output power and 0.0304 HP. Under cold conditions, the motor reaches 948.42 rpm with 2.64 lb-in of torque and stalls at 0 rpm with 2.39lb-in of torque. The motor, gearbox, and system efficiencies are listed as 37.8% and it can operate continuously under start/stall conditions of 0.52 amps and 2.39 lb-in of torque.
Groschopp 05157 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a rating of 1207.1 rpm and 1.5 lb-in of torque consuming 0.23 amps of current. The motor produces 21 watts of output power equivalent to 0.0279 horsepower. Under breakdown and pullup conditions, the motor reaches lower speeds and higher torques. The motor has a continuous duty cycle with peak efficiencies of 36% for the gearbox, motor, and overall system. Startup requires 0.40 amps of current producing 2.55 lb-in of torque. A graph shows efficiency decreases with speed above 750 rpm.
Groschopp 66372 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at various speeds. It lists the motor's rating, breakdown torque, pullup torque, duty cycle, and start/stall conditions. Charts show how torque, speed, and efficiency vary depending on the load. The motor is powered by 115V AC, has a maximum speed of 1510rpm, and a 5.1:1 gear ratio. It can deliver up to 9.7lb-in of torque and has peak efficiencies of 47.8% for the motor and 21.1% for the overall system.
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 47778 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output at various loads, duty cycle, and efficiency percentages for the gearbox, motor and system. It also lists start/stall current and torque values, efficiency and speed curves, and contact information for the company selling and servicing the motor.
Groschopp 05134 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2905.9 rpm, torque of 1.5 lb-in, current of 0.49 amps, output power of 50 watts, and efficiency of 47.2%. Startup conditions include a current of 0.96 amps and torque of 1.37 lb-in. A graph shows efficiency and speed at varying torque levels from 0 to 3200 rpm.
Groschopp 47779 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup, stall, efficiency and speed vs torque performance curves for the motor both cold and hot. The motor is to be continuously run and is sold and serviced by Electromate.
Groschopp 05159 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 50Hz, and speed of 2710rpm without a gearbox. Key specifications include a rating of 2710rpm and 1.5lb-in of torque at 0.34amps and 48watts of output, or 0.0645HP. Breakdown and pullup torque and speed are also listed, along with duty cycle, efficiency ratings, start/stall conditions, and a graph of torque vs speed and efficiency when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 05159 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 50Hz, and speed of 2710rpm without a gearbox. Key specifications include a rating of 2710rpm and 1.5lb-in of torque at 0.34amps and 48watts of output, or 0.0645HP. Breakdown and pullup torque and speed are also listed, along with duty cycle, efficiency curves, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a continuous duty cycle and 51% efficiency. Under cold start/stall conditions, the motor produces 1.17 amps of current and 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from a maximum of 90% at low torque to 51% at peak torque.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a breakdown speed of 671 RPM and pullup speed of 34 RPM. It has continuous duty and an efficiency of 51% for the gearbox, motor, and system. Startup requires 1.17 amps and generates 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from 90% at 0 RPM to 10% at 1350 RPM.
Groschopp 47777 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, efficiency ratings at various torques and speeds, and contact information for the supplier. The motor runs at 1500 rpm on 230v 60Hz power, with a 10:1 ratio gearbox. It produces 149.6 rpm and 6.1 lb-in of torque under normal operating conditions and has a continuous duty cycle with peak efficiency of 22.9%.
Groschopp 47749 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a PS 1900 180:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1460 rpm, output of 0.0135 HP at 8.1 rpm, and torque measurements for startup, operating, and breakdown conditions. Charts show efficiency curves for the gearbox, motor, and overall system at varying torque and speed levels.
Similar to Groschopp 05122 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Groschopp 05122 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 1 Ph 6540 TENV 115 v 60 Hz 1490 rpm 4 Poles None Product ID: 5122 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 1491.8 rpm 1.0lb-in 0.49 amps 17 watts 0.0227 HP Breakdown (Cold): Speed: Torque: 1024.29 rpm 1.44 lb-in Pullup (Cold): Speed: Torque: 0.0 rpm 1.06lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 35.4 % 35.4 % Start/Stall Conditions: Current: Torque: 0.71 amps 1.06 lb-in Torque (lb-in) Speed RPM Efficiency 200 0 0.0 0.2 400 0.3 600 0.5 800 0.6 1000 0.8 1200 0.9 1400 1.1 1600 1.2 1800 1.4 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Capacitor - 10uF 250V Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com