Groschopp 05316 specsheet
•
0 likes•25 views
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 230V, speed of 3130 rpm, and no gearbox. Key specifications include a rating of 3126.6 rpm at 2.6lb-in of torque drawing 0.72 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot, with maximum efficiency of 61.8%. Start/stall conditions draw 1.37 amps at 2.2 lb-in of torque.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 05312 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 115V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3092.5 rpm and 0.1374 HP at 64.6% efficiency. Performance charts show speed, torque, current and efficiency at varying torque levels from start up to full speed. It is intended for continuous duty and has a 18uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05317 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a rating of 2614.4 rpm, 0.1180 HP, and 88 watts of output power. The motor runs at 2610 rpm on 230v 50Hz power and has a maximum torque of 4.27 lb-in. Charts show the motor's speed and efficiency at different torque levels both when cold and hot.
Groschopp 05126 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specifications include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency and torque curves versus speed in both cold and hot conditions.
Groschopp 05309 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, 50Hz, and speed of 2570rpm. The motor has an output of 62 watts, 0.0828 horsepower, and torque of 2.0lb-in at its rated speed of 2567rpm. Charts show its torque and efficiency at varying speeds when cold and hot.
Groschopp 05308 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3089.2 rpm and 1.8 lb-in of torque at 0.52 amps and 66 watts of output. The motor has a breakdown speed of 2564.76 rpm and pullup speed of 0 rpm. It has a continuous duty cycle with system efficiencies of 57.4%. Start/stall conditions are 1.06 amps and 1.56 lb-in of torque. Additional details are provided on torque and speed curves as well as notes on a 2.5uF 440V capacitor.
Groschopp 05318 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, speed of 3000 rpm, and no gearbox. Key specifications include a rated speed of 3000.6 rpm, torque of 4.5lb-in, current of 1.30 amps, output of 161 watts, and efficiency of 57.1%. A graph shows efficiency and speed versus torque from 0 to 3600 rpm.
Groschopp 05294 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, frequency of 60Hz, and speed of 3150rpm without a gearbox. Key specifications include a rating of 3152rpm, 6.3lb-in of torque, 1.32amps of current, 237watts of output power, and 0.3171HP. Startup current is 3.88amps with 12.3lb-in of torque. Efficiency is highest at 63.9% and it has a continuous duty cycle. The motor is sold and serviced by Electromate.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Recommended
Groschopp 05312 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 115V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3092.5 rpm and 0.1374 HP at 64.6% efficiency. Performance charts show speed, torque, current and efficiency at varying torque levels from start up to full speed. It is intended for continuous duty and has a 18uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05317 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a rating of 2614.4 rpm, 0.1180 HP, and 88 watts of output power. The motor runs at 2610 rpm on 230v 50Hz power and has a maximum torque of 4.27 lb-in. Charts show the motor's speed and efficiency at different torque levels both when cold and hot.
Groschopp 05126 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specifications include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency and torque curves versus speed in both cold and hot conditions.
Groschopp 05309 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, 50Hz, and speed of 2570rpm. The motor has an output of 62 watts, 0.0828 horsepower, and torque of 2.0lb-in at its rated speed of 2567rpm. Charts show its torque and efficiency at varying speeds when cold and hot.
Groschopp 05308 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3089.2 rpm and 1.8 lb-in of torque at 0.52 amps and 66 watts of output. The motor has a breakdown speed of 2564.76 rpm and pullup speed of 0 rpm. It has a continuous duty cycle with system efficiencies of 57.4%. Start/stall conditions are 1.06 amps and 1.56 lb-in of torque. Additional details are provided on torque and speed curves as well as notes on a 2.5uF 440V capacitor.
Groschopp 05318 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, speed of 3000 rpm, and no gearbox. Key specifications include a rated speed of 3000.6 rpm, torque of 4.5lb-in, current of 1.30 amps, output of 161 watts, and efficiency of 57.1%. A graph shows efficiency and speed versus torque from 0 to 3600 rpm.
Groschopp 05294 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, frequency of 60Hz, and speed of 3150rpm without a gearbox. Key specifications include a rating of 3152rpm, 6.3lb-in of torque, 1.32amps of current, 237watts of output power, and 0.3171HP. Startup current is 3.88amps with 12.3lb-in of torque. Efficiency is highest at 63.9% and it has a continuous duty cycle. The motor is sold and serviced by Electromate.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Groschopp 05310 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 230V, speed of 2920 rpm, and no gearbox. Key specifications include a rated speed of 2915.1 rpm, output of 104 watts, and efficiency of 49.2%. Performance charts show torque and speed characteristics including breakdown, pullup, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05292 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a voltage of 230V, speed of 2690 rpm, and no gearbox. Key specifications include a rating of 2693 rpm and 3.5 lb-in of torque drawing 0.58 amps of current and producing 113 watts of output power equivalent to 0.1513 HP. Breakdown and pullup torque and speed are also listed along with efficiency curves and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Performance charts show torque and speed values at various RPMs as well as efficiency curves for cold and hot operation.
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05314 specsheet
This document provides specifications for an AC single-phase 8060 TEFC motor with a voltage of 115V, speed of 3000 rpm, and no gearbox. The motor has a rated speed of 3001.9 rpm, torque of 4.7 lb-in, current of 2.64 amps, output of 168 watts, and efficiency of 56.8%. Startup conditions include a current of 4.88 amps and torque of 4.45 lb-in. A graph shows efficiency and speed curves versus torque in both cold and hot conditions.
Groschopp 05304 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 3080rpm, and no gearbox. Key specifications include a rating of 3076.7rpm and 1.8lb-in of torque drawing 1.02amps of current. Under breakdown conditions it has a speed of 2492.86rpm and torque of 2.75lb-in, and under pullup conditions it has a speed of 0rpm and torque of 1.58lb-in. It is continuously rated with an efficiency of 57.8% for the motor and system. Start/stall conditions draw 2.06amps with 1.58lb-in of torque. A graph shows efficiency
Groschopp 05312 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 115V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3092.5 rpm and 0.1374 HP at 64.6% efficiency. Performance charts show speed, torque, current and efficiency at varying torque levels from start up to full speed. It is intended for continuous duty and has a 18uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05317 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a rating of 2614.4 rpm, 0.1180 HP, and 88 watts of output power. The motor runs at 2610 rpm on 230v 50Hz power and has a maximum torque of 4.27 lb-in. Charts show the motor's speed and efficiency at different torque levels both when cold and hot.
Groschopp 05308 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3089.2 rpm and 1.8 lb-in of torque drawing 0.52 amps of current. Performance tests found a breakdown speed of 2564.76 rpm and pullup torque of 1.56lb-in. The motor has a continuous duty cycle with efficiencies of 57.4% for the motor and system. Start/stall conditions draw 1.06 amps and produce 1.56 lb-in of torque. A graph shows efficiency against torque and speed.
Groschopp 05318 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, speed of 3000 rpm, and no gearbox. Key specifications include a rated speed of 3000.6 rpm, torque of 4.5lb-in, current of 1.30 amps, output of 161 watts, and efficiency of 57.1%. A graph shows efficiency and speed versus torque from 0 to 3600 rpm.
Groschopp 05309 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, 50Hz, and speed of 2570rpm. The motor has an output of 62 watts, 0.0828 horsepower, and torque of 2.0lb-in at its rated speed of 2567rpm. Charts show its torque and efficiency at varying speeds when cold and hot.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05294 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, frequency of 60Hz, and speed of 3150rpm without a gearbox. Key specifications include a rating of 3152rpm, 6.3lb-in of torque, 1.32amps of current, 237watts of output power, and 0.3171HP. Startup current is 3.88amps with 12.3lb-in of torque. Efficiency is highest at 63.9% and it has a continuous duty cycle. The motor is sold and serviced by Electromate.
Groschopp 05310 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 230V, speed of 2920 rpm, and no gearbox. Key specifications include a rated speed of 2915.1 rpm, output of 104 watts, and efficiency of 49.2%. Performance charts show torque and speed characteristics at various loads as well as efficiency curves.
Groschopp 05304 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 3080rpm, and no gearbox. Key specifications include a rating of 3076.7rpm and 1.8lb-in of torque at 1.02amps and 67watts of output, or 0.0894HP. Breakdown and pullup tests were also run. The motor has a 57.8% efficiency rating and can operate continuously with a start/stall current of 2.06amps and torque of 1.58lb-in. A graph shows efficiency and torque curves versus speed under both cold and hot operating conditions.
Groschopp 66360 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 10:1 ratio gearbox. Key specifications include an output speed of 300.2 rpm, torque of 31.9 lb-in, current of 2.64 amps, and power output of 113 watts or 0.1521 HP. Charts show torque and speed characteristics along with efficiency curves for cold and hot operation.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Groschopp 05126 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specs include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency versus torque and speed.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and outputs 305.7 rpm through the gearbox. Key specifications include an output of 26 watts at 0.0353 HP as well as start/stall current of 1.32 amps and torque of 6.42 lb-in. Charts show efficiency curves for torque, speed, and temperature. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm single phase and draws 0.62 amps of current at its rated output of 305.7 rpm and 7.3 lb-in of torque. Startup conditions draw 1.32 amps at 6.42 lb-in of torque. The document also provides efficiency ratings for the gearbox, motor and overall system at various torque levels, as well as notes on a 16uF 250V capacitor.
Groschopp 47760 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 320:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 9.6 rpm and 125 lb-in of torque. Charts show torque and efficiency at varying speeds under cold and hot operating conditions. The motor has a continuous duty cycle and efficiency of 49.3% for the motor alone and 20.1% for the overall system. It requires a 16uF 250V capacitor.
More Related Content
What's hot
Groschopp 05310 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 230V, speed of 2920 rpm, and no gearbox. Key specifications include a rated speed of 2915.1 rpm, output of 104 watts, and efficiency of 49.2%. Performance charts show torque and speed characteristics including breakdown, pullup, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05292 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a voltage of 230V, speed of 2690 rpm, and no gearbox. Key specifications include a rating of 2693 rpm and 3.5 lb-in of torque drawing 0.58 amps of current and producing 113 watts of output power equivalent to 0.1513 HP. Breakdown and pullup torque and speed are also listed along with efficiency curves and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Performance charts show torque and speed values at various RPMs as well as efficiency curves for cold and hot operation.
Groschopp 05132 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3100rpm. Key specifications include a rating of 3100.8rpm at 1.0lb-in of torque drawing 0.38amps, with an output of 38watts and 0.0513HP. Startup current is 0.78amps with 0.75lb-in of torque. Efficiency is provided in a graph showing the relationship between speed, torque, and efficiency for both cold and hot operating conditions. The motor has a 4uF 440V capacitor and is sold and serviced by Electromate.
Groschopp 05314 specsheet
This document provides specifications for an AC single-phase 8060 TEFC motor with a voltage of 115V, speed of 3000 rpm, and no gearbox. The motor has a rated speed of 3001.9 rpm, torque of 4.7 lb-in, current of 2.64 amps, output of 168 watts, and efficiency of 56.8%. Startup conditions include a current of 4.88 amps and torque of 4.45 lb-in. A graph shows efficiency and speed curves versus torque in both cold and hot conditions.
Groschopp 05304 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 3080rpm, and no gearbox. Key specifications include a rating of 3076.7rpm and 1.8lb-in of torque drawing 1.02amps of current. Under breakdown conditions it has a speed of 2492.86rpm and torque of 2.75lb-in, and under pullup conditions it has a speed of 0rpm and torque of 1.58lb-in. It is continuously rated with an efficiency of 57.8% for the motor and system. Start/stall conditions draw 2.06amps with 1.58lb-in of torque. A graph shows efficiency
What's hot (6)
Similar to Groschopp 05316 specsheet
Groschopp 05312 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 115V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3092.5 rpm and 0.1374 HP at 64.6% efficiency. Performance charts show speed, torque, current and efficiency at varying torque levels from start up to full speed. It is intended for continuous duty and has a 18uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05317 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a rating of 2614.4 rpm, 0.1180 HP, and 88 watts of output power. The motor runs at 2610 rpm on 230v 50Hz power and has a maximum torque of 4.27 lb-in. Charts show the motor's speed and efficiency at different torque levels both when cold and hot.
Groschopp 05308 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3089.2 rpm and 1.8 lb-in of torque drawing 0.52 amps of current. Performance tests found a breakdown speed of 2564.76 rpm and pullup torque of 1.56lb-in. The motor has a continuous duty cycle with efficiencies of 57.4% for the motor and system. Start/stall conditions draw 1.06 amps and produce 1.56 lb-in of torque. A graph shows efficiency against torque and speed.
Groschopp 05318 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, speed of 3000 rpm, and no gearbox. Key specifications include a rated speed of 3000.6 rpm, torque of 4.5lb-in, current of 1.30 amps, output of 161 watts, and efficiency of 57.1%. A graph shows efficiency and speed versus torque from 0 to 3600 rpm.
Groschopp 05309 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, 50Hz, and speed of 2570rpm. The motor has an output of 62 watts, 0.0828 horsepower, and torque of 2.0lb-in at its rated speed of 2567rpm. Charts show its torque and efficiency at varying speeds when cold and hot.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05294 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, frequency of 60Hz, and speed of 3150rpm without a gearbox. Key specifications include a rating of 3152rpm, 6.3lb-in of torque, 1.32amps of current, 237watts of output power, and 0.3171HP. Startup current is 3.88amps with 12.3lb-in of torque. Efficiency is highest at 63.9% and it has a continuous duty cycle. The motor is sold and serviced by Electromate.
Groschopp 05310 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 230V, speed of 2920 rpm, and no gearbox. Key specifications include a rated speed of 2915.1 rpm, output of 104 watts, and efficiency of 49.2%. Performance charts show torque and speed characteristics at various loads as well as efficiency curves.
Groschopp 05304 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 3080rpm, and no gearbox. Key specifications include a rating of 3076.7rpm and 1.8lb-in of torque at 1.02amps and 67watts of output, or 0.0894HP. Breakdown and pullup tests were also run. The motor has a 57.8% efficiency rating and can operate continuously with a start/stall current of 2.06amps and torque of 1.58lb-in. A graph shows efficiency and torque curves versus speed under both cold and hot operating conditions.
Groschopp 66360 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 10:1 ratio gearbox. Key specifications include an output speed of 300.2 rpm, torque of 31.9 lb-in, current of 2.64 amps, and power output of 113 watts or 0.1521 HP. Charts show torque and speed characteristics along with efficiency curves for cold and hot operation.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Groschopp 05126 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a voltage of 115V, speed of 3150 rpm, and no gearbox. Key specs include a rating of 3152.3 rpm and 1.1 lb-in of torque at 0.69 amps and 41 watts of output. The motor has a breakdown speed of 2462.14 rpm and pullup speed of 0 rpm. It has a continuous duty cycle and system efficiency of 52.6%. Start/stall conditions are 1.58 amps and 0.93 lb-in of torque. Performance charts show efficiency versus torque and speed.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and outputs 305.7 rpm through the gearbox. Key specifications include an output of 26 watts at 0.0353 HP as well as start/stall current of 1.32 amps and torque of 6.42 lb-in. Charts show efficiency curves for torque, speed, and temperature. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm single phase and draws 0.62 amps of current at its rated output of 305.7 rpm and 7.3 lb-in of torque. Startup conditions draw 1.32 amps at 6.42 lb-in of torque. The document also provides efficiency ratings for the gearbox, motor and overall system at various torque levels, as well as notes on a 16uF 250V capacitor.
Groschopp 47760 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 320:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 9.6 rpm and 125 lb-in of torque. Charts show torque and efficiency at varying speeds under cold and hot operating conditions. The motor has a continuous duty cycle and efficiency of 49.3% for the motor alone and 20.1% for the overall system. It requires a 16uF 250V capacitor.
Groschopp 05139 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3200rpm without a gearbox. Key specifications include a rating of 3200rpm and 1.6lb-in of torque at 0.38amps and 62watts of output or 0.0829HP. Breakdown and pullup torque and speed are also listed along with duty cycle, efficiency curves, start/stall conditions, and contact information for the distributor.
Groschopp 05139 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a voltage of 230V, frequency of 60Hz, and speed of 3200rpm without a gearbox. Key specifications include a rating of 3200rpm and 1.6lb-in of torque at 0.38amps and 62watts of output or 0.0829HP. Breakdown and pullup torque and speed are also listed along with duty cycle, efficiency curves, start/stall conditions, and contact information for the distributor.
Groschopp 05311 specsheet
This document provides specifications for an AC single-phase 8040 TEFC motor with a voltage of 230V, 50Hz, and speed of 2490rpm without a gearbox. Key specifications include a no-load speed of 2486rpm, output of 99watts and 0.1323HP, and an efficiency rating of 46.9% for the motor. Performance charts show torque and speed values at various points, as well as efficiency curves for cold and hot operation.
Groschopp 05311 specsheet
This document provides specifications for an AC single-phase 8040 TEFC motor with a voltage of 230V, 50Hz, and speed of 2490 rpm. The motor has an output of 99 watts, 0.1323 horsepower, and torque of 3.4lb-in at 2486 rpm. Charts show torque and efficiency curves for the motor when cold and hot.
Similar to Groschopp 05316 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Recently uploaded (20)
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Groschopp 05316 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 1 Ph 8060 TENV 230 v 60 Hz 3130 rpm 2 Poles None Product ID: 5316 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 3126.6 rpm 2.6lb-in 0.72 amps 95 watts 0.1269 HP Breakdown (Cold): Speed: Torque: 2451.69 rpm 3.84 lb-in Pullup (Cold): Speed: Torque: 0.0 rpm 2.20lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 61.8 % 61.8 % Start/Stall Conditions: Current: Torque: 1.37 amps 2.20 lb-in Torque (lb-in) Speed RPM Efficiency 400 0 0.0 0.4 800 0.8 1200 1.2 1600 1.6 2000 2.0 2400 2.4 2800 2.8 3200 3.2 3600 3.6 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Capacitor - 4.5uF 440V Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com