The document specifies requirements for graduated measuring cylinders to be used for sediment analysis in a laboratory. It lists four cylinders with nominal capacities of 100ml, 250ml, 500ml and 1000ml that must be made of Corning glass or similar material. Each cylinder must comply with IS 878-1975 standards for scale divisions, capacity tolerances, and overall heights.

1. 20.011 GRADUATED MEASURING CYLINDERS
Approval Date: 20 May 1998
Reviewed on : 23 October 2007 Version: 1
Equipment Specification: GRADUATED MEASURING CYLINDERS Version 1 20.011-1/2
Purpose
The measuring cylinders will be used for general laboratory activities related to sediment
analysis.
Conditions & Requirements
The graduated measuring cylinders shall comply with IS 878-1975
Specifications
material Corning glass or similar
nominal
capacity
(ml)
smallest
scale
division
max. capacity
tolerance
(ml)
overall
height
(mm)
100 1 ±1 260
250 2 ±2 335
500 5 ±5 390
1000 10 +/-10 470

2. 20.011 GRADUATED MEASURING CYLINDERS
As per HP-I
Approval Date: 20 May 1998 Version: 1
Equipment Specification: GRADUATED MEASURING CYLINDERS Version 1 20.011-2/2
Purpose
The measuring cylinders will be used for general laboratory activities related to sediment
analysis.
Conditions & Requirements
The graduated measuring cylinders shall comply with IS 878-1975
Specifications
material Corning glass or similar
nominal
capacity
(ml)
smallest
scale
division
max. capacity
tolerance
(ml)
overall
height
(mm)
100 1 ±1 260
250 2 ±2 335
500 5 ±5 390
1000 10 +/-10 470