Grading
•Download as DOCX, PDF•
0 likes•206 views
The document provides grading analysis results for aggregates based on sieve size. It includes three tables showing: 1. Cumulative retained percentages and passing percentages for aggregate materials sieved through various mesh sizes, ranging from 540 mm to 0.15 mm. 2. Cumulative retained weights and percentages for fine aggregate sieved through various mesh sizes from 10 mm to 0.15 mm, with specified limits. 3. Cumulative retained weights and percentages for a combined coarse and fine aggregate sample sieved through various mesh sizes from 40 mm to 2.36 mm, with specified limits.
Report
Share
Report
Share
Recommended
Prysmian BICON 384 Heavy Duty Hook Cable Cleats
This document provides details on mounting and selecting cable cleats. Cleats should be mounted on M10 fixings directly onto C section channel without needing an adaptor. The document lists six cleat design numbers with their dimensions for cable diameter and weight, ranging from design 384AA01 for cables 25-46mm to 384AA06 for cables 70-129mm. Technical data is also provided.
Salisbury 4213 Universal Switch Stick
This document provides specifications for universal switch sticks, including dimensions, weights, and component details. Universal switch sticks come in one, two, and three section models with diameters of 1.25 inches or 1.5 inches. They range in length from 4 to 20 feet. The one-piece sticks have a universal head, while the multi-section sticks have matching diameters on the top and bottom sections.
Hito 86
The document contains measurements of area and volume for different sections along a route from 0+000 to 0+700 kilometers. The area and fill volume are provided for 20 sections, with area ranging from 37.118 to 73.306 square meters and fill volumes ranging from 0 to 3.919 cubic meters. The total area measured is 1016.627 square meters and total fill volume is 15.97 cubic meters.
Wide flange-shape-jisg3192
The document provides specifications for wide flange shapes, including:
- Dimensional specifications and tolerances for various metric sizes
- Chemical composition and mechanical properties of steel grades
- Tables listing the section properties and weights of different wide flange sections
- The specifications are according to the JIS G3192 standard
Ejercicio
The document contains data from a projectile motion experiment. A projectile was launched at an angle of 30 degrees with an initial velocity of 150 m/s. Data was collected over 15 seconds recording time, x position, and y position. The maximum height reached was 15.306 m.
Kombat Copper September 2015 Corporate Presentation
- The document reports on results from 35 drill holes completed in 2015 exploring the Kombat Mine area in Namibia. Significant copper, lead and silver mineralization was intersected in many of the holes.
- Highlights include Hole K15-004 which intersected 19 meters of 0.97% copper and 11.58 g/t silver, and Hole K15-015 which intersected 2.34 meters of 16.31% copper and 75.34 g/t silver.
- The Kombat Mine has operated since 1976 and produces copper and silver from a series of underground shafts and open pits. Drilling is testing for additional resources near the existing mine workings.
Inches to-millimeters-conversion-chart
This document contains a conversion chart that lists inches and the corresponding values in millimeters. It provides conversions from 0.1 inches up to 1000 inches in increments of 1 inch. For each inch measurement, the equivalent millimeter measurement is given. At the bottom is a note about a sister website for world time zones.
Iso 2768-tolerances drawings
The document provides tables specifying permissible deviation limits for various tolerance classes and measurement types in metric units. It includes tolerance limits for linear measures ranging from 0.5-4000mm, angular measures from 10-400mm, and external radii/chamfer heights from 0.5-6mm. A metric thread pitch chart lists standard pitch sizes for bolt threads from M2 to M56.
Recommended
Prysmian BICON 384 Heavy Duty Hook Cable Cleats
This document provides details on mounting and selecting cable cleats. Cleats should be mounted on M10 fixings directly onto C section channel without needing an adaptor. The document lists six cleat design numbers with their dimensions for cable diameter and weight, ranging from design 384AA01 for cables 25-46mm to 384AA06 for cables 70-129mm. Technical data is also provided.
Salisbury 4213 Universal Switch Stick
This document provides specifications for universal switch sticks, including dimensions, weights, and component details. Universal switch sticks come in one, two, and three section models with diameters of 1.25 inches or 1.5 inches. They range in length from 4 to 20 feet. The one-piece sticks have a universal head, while the multi-section sticks have matching diameters on the top and bottom sections.
Hito 86
The document contains measurements of area and volume for different sections along a route from 0+000 to 0+700 kilometers. The area and fill volume are provided for 20 sections, with area ranging from 37.118 to 73.306 square meters and fill volumes ranging from 0 to 3.919 cubic meters. The total area measured is 1016.627 square meters and total fill volume is 15.97 cubic meters.
Wide flange-shape-jisg3192
The document provides specifications for wide flange shapes, including:
- Dimensional specifications and tolerances for various metric sizes
- Chemical composition and mechanical properties of steel grades
- Tables listing the section properties and weights of different wide flange sections
- The specifications are according to the JIS G3192 standard
Ejercicio
The document contains data from a projectile motion experiment. A projectile was launched at an angle of 30 degrees with an initial velocity of 150 m/s. Data was collected over 15 seconds recording time, x position, and y position. The maximum height reached was 15.306 m.
Kombat Copper September 2015 Corporate Presentation
- The document reports on results from 35 drill holes completed in 2015 exploring the Kombat Mine area in Namibia. Significant copper, lead and silver mineralization was intersected in many of the holes.
- Highlights include Hole K15-004 which intersected 19 meters of 0.97% copper and 11.58 g/t silver, and Hole K15-015 which intersected 2.34 meters of 16.31% copper and 75.34 g/t silver.
- The Kombat Mine has operated since 1976 and produces copper and silver from a series of underground shafts and open pits. Drilling is testing for additional resources near the existing mine workings.
Inches to-millimeters-conversion-chart
This document contains a conversion chart that lists inches and the corresponding values in millimeters. It provides conversions from 0.1 inches up to 1000 inches in increments of 1 inch. For each inch measurement, the equivalent millimeter measurement is given. At the bottom is a note about a sister website for world time zones.
Iso 2768-tolerances drawings
The document provides tables specifying permissible deviation limits for various tolerance classes and measurement types in metric units. It includes tolerance limits for linear measures ranging from 0.5-4000mm, angular measures from 10-400mm, and external radii/chamfer heights from 0.5-6mm. A metric thread pitch chart lists standard pitch sizes for bolt threads from M2 to M56.
Portfolio 23 6-11
This document appears to contain numerical data organized into categories with no other context provided. It includes numbers ranging from 1-6, with values from 2.86 to 4, and includes a category labeled "(4)". No other meaningful information can be discerned from this limited data.
Inch To Millimeter Conversion Table
This document contains several conversion tables for converting between decimals, fractions, and millimeters. It includes tables for converting decimals to millimeters from 0.001 to 1.000 mm, fractions to their decimal equivalents and then to millimeters, and common fractions to their decimal equivalents and millimeters.
Besavne cevi din_2448
This document provides a table listing the weights in kilograms per meter of seamless steel tubes of varying diameters and wall thicknesses according to DIN 2448. The table includes the outer diameter, standard wall thickness, weight in kg/m, and other dimensional specifications for over 50 tube sizes ranging from 10.2 mm outer diameter up to 558.8 mm outer diameter.
Verolibroo
This document contains a table that shows the motion of an object over time. The table lists values for time (t), displacement (x), and height (y) as the object moves under the influence of gravity (g = 9.8 m/s^2) with an initial velocity (Vo) of 150 m/s at an angle (α) of 30 degrees. The maximum time (Tmax) for the motion is 15.306 seconds.
Millimeter To Inch Conversion Table
The document is a conversion table that lists millimeter measurements from 0.01 to 100 in increments of 0.01 and their equivalent measurements in inches.
Sigma Table
The document shows tables with data on yield percentage, sigma quality levels, defects per million, and opportunities as yield decreases. It provides metrics on quality levels and associated defects rates across a wide range of yield percentages down to 10% yield.
Process stream table.xlsx
The document contains sensor data from a chemical process stream including pressure, temperature, mass flow rates, molar flow rates, and composition measurements over time. The stream contains a mixture of chemicals including ethylbenzene, styrene, hydrogen, benzene, toluene, ethylene, carbon monoxide, carbon dioxide, methane, and water. Pressure and temperature fluctuate within a given range over the measurement period. Mass and molar flow rates also vary for the different components in the stream.
Drawing1 a2 (2)
This document appears to contain a series of numbers with no context or explanation. The numbers range from 0.1 to 4.62 with many repeating decimals or single digit values. There is no clear meaning that can be discerned from the numeric values alone without additional context or documentation.
Flyer Topflex EMV-UV-3-PLUS_2_XSLCYK
This document contains specifications for various power cable parts including the number of cores, cross-sectional area, outer diameter, coupling resistance at different frequencies, power ratings, copper weight, and total weight. The parts are organized into tables with the part number, technical specifications, and note that specifications may change without notice.
DSI Inches to Decimal - Millimeter Conversion Chart
This document provides conversion tables between inches and millimeters as well as a 32 millimeter multiplication table. The inch to millimeter conversion table lists incremental inch measurements from 0.0156 to 1 inch converted to millimeters. The 32 millimeter multiplication table shows the result of multiplying whole numbers from 1 to 76 by 32.
Math in the News: Issue 95
The document discusses the annual Iditarod sled dog race from Anchorage to Nome, Alaska. It notes that winning times have steadily decreased over the years, now hovering around 200 hours. Tables of winning times from 1973 to present are analyzed to calculate average speeds, which have increased from around 2 mph to over 5 mph as mushers have improved techniques and care for their dog teams.
Masonry Shear Wall Design-Excel Sheet 2
This document provides design parameters for a LRFD masonry shear wall with axial load. It includes properties of the wall cross-section and reinforcing bars, as well as material properties and design requirements. The wall is subjected to an axial load of 429.66 kips and a factored shear of 104.8 kips. Design checks are performed to verify the wall capacity for the axial and shear loads, and that the calculated strains do not exceed allowable material strain limits. Reinforcing steel is designed to resist a tensile force of 2194.3 kips and a bending moment of 1184923 kip-ft.
Mesh to micron conversion chart
This document provides a conversion chart between U.S. mesh sizes, microns, and millimeters for different particle sizes. It explains that mesh size refers to the number of openings in one linear inch of a screen, with higher numbers indicating finer particles. Plus and minus signs indicate whether particles smaller or larger than a given mesh size are retained. Beyond 325 mesh, particle size is usually described in microns, where one micron equals one millionth of a meter or one twenty-fifth thousandth of an inch. The chart then lists common mesh sizes and the materials they are used to sieve.
MasonryShearWall Design-1 Sheet1
This document provides design parameters and calculations for an LRFD masonry shear wall with axial load. It includes properties of the wall cross-section and reinforcing bars, as well as material properties. The calculations check the capacity of the wall to resist the axial load (Pu) and factored bending moment (Mu), and confirm that the nominal strengths exceed the factored demands. Strain in the wall is also checked to be below the allowable maximum.
GE & QS
This document provides a compare and contrast essay analyzing the James Bond films Golden Eye (1995) and Quantum of Solace (2008). It summarizes that Pierce Brosnan starred as James Bond in Golden Eye, while Daniel Craig starred in Quantum of Solace. The essay compares the Aston Martin vehicles used, the actresses and their roles, and the different flight scenes in each film. It concludes that while the films are meant for entertainment, they can also teach lessons about remaining steady and solving problems under pressure.
The unknown
We will be looking into the Old Testament book of Joshua chapter 3 for our lesson content to discuss the subject of " The Unknown" and more specifically the fear of it and ultimately how to face it.
Isaiah 43:18-19 says “Remember not the former things,
nor consider the things of old.
19 Behold, I AM DOING A NEW THING;
now it springs forth, DO YOU NOT PERCEIVE IT?
I will make a way in the wilderness
and rivers in the desert.
Often, "the old things": are the comfortable things , because they are the known things...But just because they are comfortable does not mean they are the good things.
Fear of the unknown often will keep us from things that are better for us and in fact - sometimes the BEST things for us... But "DO WE PERCEIVE IT?"
Christ can do a new thing with you , but you have to make a leap of faith into The Unknown!
Walk
A biblical passage discusses a man who was healed at a pool in Bethesda after Jesus told him to get up, take up his bed, and walk. The document analyzes this passage and parallels it to changing one's life, with getting up representing deciding to change, taking up your bed representing prioritizing and eliminating excess, and walking representing actively changing and encouraging others to change as well.
8 trường đại học tốt nhất nước úc
Tương tự nhóm Ivy League của Hoa Kỳ, nhóm 8 trường đại học của Úc (Group of Eight-Go8) là một liên minh các trường đại học hàng đầu nước Úc tập trung vào lĩnh vực nghiên cứu và hoàn thiện hệ thống giáo dục chuyên sâu.
Đây cũng là cái nôi đào tạo khoảng 60% tiến sĩ ở Úc mỗi năm.
Projectionofpointsandlines (1)
This document provides lecture notes on orthographic projections of points and lines. It begins by outlining the key information needed to draw projections, including the object, observer, and object location. It then discusses the four quadrants formed by the horizontal and vertical planes and how an object's placement affects its front and top views. Various examples of point and line projections are shown, including the effects of an object's placement in different quadrants. Key concepts like true length, front, top, and side views are defined. The document concludes with example problems demonstrating how to draw orthographic projections of lines given information like lengths, angles and end point positions.
More Related Content
What's hot
Portfolio 23 6-11
This document appears to contain numerical data organized into categories with no other context provided. It includes numbers ranging from 1-6, with values from 2.86 to 4, and includes a category labeled "(4)". No other meaningful information can be discerned from this limited data.
Inch To Millimeter Conversion Table
This document contains several conversion tables for converting between decimals, fractions, and millimeters. It includes tables for converting decimals to millimeters from 0.001 to 1.000 mm, fractions to their decimal equivalents and then to millimeters, and common fractions to their decimal equivalents and millimeters.
Besavne cevi din_2448
This document provides a table listing the weights in kilograms per meter of seamless steel tubes of varying diameters and wall thicknesses according to DIN 2448. The table includes the outer diameter, standard wall thickness, weight in kg/m, and other dimensional specifications for over 50 tube sizes ranging from 10.2 mm outer diameter up to 558.8 mm outer diameter.
Verolibroo
This document contains a table that shows the motion of an object over time. The table lists values for time (t), displacement (x), and height (y) as the object moves under the influence of gravity (g = 9.8 m/s^2) with an initial velocity (Vo) of 150 m/s at an angle (α) of 30 degrees. The maximum time (Tmax) for the motion is 15.306 seconds.
Millimeter To Inch Conversion Table
The document is a conversion table that lists millimeter measurements from 0.01 to 100 in increments of 0.01 and their equivalent measurements in inches.
Sigma Table
The document shows tables with data on yield percentage, sigma quality levels, defects per million, and opportunities as yield decreases. It provides metrics on quality levels and associated defects rates across a wide range of yield percentages down to 10% yield.
Process stream table.xlsx
The document contains sensor data from a chemical process stream including pressure, temperature, mass flow rates, molar flow rates, and composition measurements over time. The stream contains a mixture of chemicals including ethylbenzene, styrene, hydrogen, benzene, toluene, ethylene, carbon monoxide, carbon dioxide, methane, and water. Pressure and temperature fluctuate within a given range over the measurement period. Mass and molar flow rates also vary for the different components in the stream.
Drawing1 a2 (2)
This document appears to contain a series of numbers with no context or explanation. The numbers range from 0.1 to 4.62 with many repeating decimals or single digit values. There is no clear meaning that can be discerned from the numeric values alone without additional context or documentation.
Flyer Topflex EMV-UV-3-PLUS_2_XSLCYK
This document contains specifications for various power cable parts including the number of cores, cross-sectional area, outer diameter, coupling resistance at different frequencies, power ratings, copper weight, and total weight. The parts are organized into tables with the part number, technical specifications, and note that specifications may change without notice.
DSI Inches to Decimal - Millimeter Conversion Chart
This document provides conversion tables between inches and millimeters as well as a 32 millimeter multiplication table. The inch to millimeter conversion table lists incremental inch measurements from 0.0156 to 1 inch converted to millimeters. The 32 millimeter multiplication table shows the result of multiplying whole numbers from 1 to 76 by 32.
Math in the News: Issue 95
The document discusses the annual Iditarod sled dog race from Anchorage to Nome, Alaska. It notes that winning times have steadily decreased over the years, now hovering around 200 hours. Tables of winning times from 1973 to present are analyzed to calculate average speeds, which have increased from around 2 mph to over 5 mph as mushers have improved techniques and care for their dog teams.
Masonry Shear Wall Design-Excel Sheet 2
This document provides design parameters for a LRFD masonry shear wall with axial load. It includes properties of the wall cross-section and reinforcing bars, as well as material properties and design requirements. The wall is subjected to an axial load of 429.66 kips and a factored shear of 104.8 kips. Design checks are performed to verify the wall capacity for the axial and shear loads, and that the calculated strains do not exceed allowable material strain limits. Reinforcing steel is designed to resist a tensile force of 2194.3 kips and a bending moment of 1184923 kip-ft.
Mesh to micron conversion chart
This document provides a conversion chart between U.S. mesh sizes, microns, and millimeters for different particle sizes. It explains that mesh size refers to the number of openings in one linear inch of a screen, with higher numbers indicating finer particles. Plus and minus signs indicate whether particles smaller or larger than a given mesh size are retained. Beyond 325 mesh, particle size is usually described in microns, where one micron equals one millionth of a meter or one twenty-fifth thousandth of an inch. The chart then lists common mesh sizes and the materials they are used to sieve.
MasonryShearWall Design-1 Sheet1
This document provides design parameters and calculations for an LRFD masonry shear wall with axial load. It includes properties of the wall cross-section and reinforcing bars, as well as material properties. The calculations check the capacity of the wall to resist the axial load (Pu) and factored bending moment (Mu), and confirm that the nominal strengths exceed the factored demands. Strain in the wall is also checked to be below the allowable maximum.
What's hot (15)
DSI Inches to Decimal - Millimeter Conversion Chart
DSI Inches to Decimal - Millimeter Conversion Chart
Viewers also liked
GE & QS
This document provides a compare and contrast essay analyzing the James Bond films Golden Eye (1995) and Quantum of Solace (2008). It summarizes that Pierce Brosnan starred as James Bond in Golden Eye, while Daniel Craig starred in Quantum of Solace. The essay compares the Aston Martin vehicles used, the actresses and their roles, and the different flight scenes in each film. It concludes that while the films are meant for entertainment, they can also teach lessons about remaining steady and solving problems under pressure.
The unknown
We will be looking into the Old Testament book of Joshua chapter 3 for our lesson content to discuss the subject of " The Unknown" and more specifically the fear of it and ultimately how to face it.
Isaiah 43:18-19 says “Remember not the former things,
nor consider the things of old.
19 Behold, I AM DOING A NEW THING;
now it springs forth, DO YOU NOT PERCEIVE IT?
I will make a way in the wilderness
and rivers in the desert.
Often, "the old things": are the comfortable things , because they are the known things...But just because they are comfortable does not mean they are the good things.
Fear of the unknown often will keep us from things that are better for us and in fact - sometimes the BEST things for us... But "DO WE PERCEIVE IT?"
Christ can do a new thing with you , but you have to make a leap of faith into The Unknown!
Walk
A biblical passage discusses a man who was healed at a pool in Bethesda after Jesus told him to get up, take up his bed, and walk. The document analyzes this passage and parallels it to changing one's life, with getting up representing deciding to change, taking up your bed representing prioritizing and eliminating excess, and walking representing actively changing and encouraging others to change as well.
8 trường đại học tốt nhất nước úc
Tương tự nhóm Ivy League của Hoa Kỳ, nhóm 8 trường đại học của Úc (Group of Eight-Go8) là một liên minh các trường đại học hàng đầu nước Úc tập trung vào lĩnh vực nghiên cứu và hoàn thiện hệ thống giáo dục chuyên sâu.
Đây cũng là cái nôi đào tạo khoảng 60% tiến sĩ ở Úc mỗi năm.
Projectionofpointsandlines (1)
This document provides lecture notes on orthographic projections of points and lines. It begins by outlining the key information needed to draw projections, including the object, observer, and object location. It then discusses the four quadrants formed by the horizontal and vertical planes and how an object's placement affects its front and top views. Various examples of point and line projections are shown, including the effects of an object's placement in different quadrants. Key concepts like true length, front, top, and side views are defined. The document concludes with example problems demonstrating how to draw orthographic projections of lines given information like lengths, angles and end point positions.
Scars.pptx
The document discusses the meaning of Jesus's scars based on John 20:19-31. It summarizes that the scars were proof of Jesus's crucifixion and resurrection, which convinced Thomas. For believers, the scars remind us of Jesus's humanity and divinity, that he can heal us, and that through his wounds we find healing. The scars also signify that Jesus suffered temptation and can help others suffering temptation. According to Isaiah 53:5, Jesus was pierced and crushed for our sins so that through his wounds we can find peace and healing.
Hardened
We all have had a friend or someone we know whose marriage was slowly and destructively disintegrating. Where there used to be love and joy and hope, their is now only accusation, misery and hatred.
And it’s all about the hardness of their hearts. In my friends case -it was him - His heart is hard towards her. He would interpret everything she said in the most negative light possible, while constantly protesting the purity of his own intentions.
Every thing she did wrong was deliberate, every thing he did wrong was an understandable and forgivable accident.
There is no space for listening, only accusing; no hope, only despair, no trust, only suspicion. When he would speak to her, he spits and bites and cuts and lashes.
That’s the way it is with a hard heart.
And our author of Hebrews says to "take care, to watch out, to see to it, that none of us have a hard unbelieving heart towards the living God."
But James said in James 4:7-10,
"Submit yourselves therefore to God. Resist the devil, and he will flee from you. Draw near to God, and he will draw near to you. Cleanse your hands, you sinners, and purify your hearts, you double-minded. Be wretched and mourn and weep. Let your laughter be turned to mourning and your joy to gloom. Humble yourselves before the Lord, and he will exalt you."
Draw near , he still wants you wink emoticon
The quickest way to the heart is by the blood ,though a wound and the only thing that can truly penetrate a harden heart , is the word of God.
Học ngành y tại úc, cần điều kiện gì
Năm nay em học lớp 11, muốn học y ở Úc sau khj tốt nghiệp phổ thông. Xin hỏi đjều kiện để học y tại Úc? Em cần tham gia kì thi nào, IELTS tối thiểu bao nhiêu? (Thanh Thảo)
Lit reviewbasics
This document provides guidance on conducting a literature review for a dissertation in statistics. It explains that a literature review is necessary to demonstrate that the proposed research is original and builds upon prior work. It recommends spending significant time reviewing references, taking detailed notes, and continually updating the list of sources as new relevant literature is discovered. The literature review should justify the research problem, methodology, and contributions to the field. It should provide evidence that the student is well-versed in the topic.
More choice, voice and control for people living with dementia 18 april 2016 ...
Co-production and people living beyond dementia - paper presented at the Dementia and Community Care Conference in Melbourne
Thưởng ngoạn Lễ hội pháo hoa Hanabi tại Nhật
Ai đó đã từng nói: “Đến Nhật mà không xem hanami (lễ hội ngắm hoa anh đào), hanabi (lễ hội pháo hoa) và momiji (ngắm lá vàng mùa thu) thì thật là đáng tiếc”.
Proposal town
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help enhance one's emotional well-being and mental clarity.
Viewers also liked (14)
More choice, voice and control for people living with dementia 18 april 2016 ...
More choice, voice and control for people living with dementia 18 april 2016 ...
Similar to Grading
Tablice beton
The document contains tables for the design of reinforced concrete structures according to EC2 (Eurocode 2). It includes tables for dimensioning rectangular cross-sections, selection of reinforcement for slabs and walls (rebar diameter and area), and selection of reinforcement for beams. The tables provide values for parameters including strain, force, and dimensions for use in structural design calculations.
88 Gibraltar Revised Pricelist Tower 1
Seller's Page:
https://www.88gibraltar.yolasite.com
https://www.facebook.com/88Gibraltar
Or Contact: +63906.219.4557
Harmonic csg lw_spechseet
The document describes Harmonic Drive's new CSG-LW gear unit, which is 30% lighter than the standard CSG-2UH unit while maintaining 30% more torque. This makes it well-suited for applications requiring high torque density like robotics. The document provides specifications, dimensions, torque and efficiency data for the CSG-LW series.
Balance de flotacion por el metodo computacional
The document presents calculations and data from a copper flotation process. It includes equations for the various flotation circuits (rougher, scavenger, cleaner, etc.). Mass balances are provided showing the distribution of copper, silver, and iron throughout the process, from the feed to each cell to the final concentrate. Assays are given for the feed and outputs from each cell, along with calculated flow rates and recoveries.
T2 dimensional evaluation data reporting sheet from hi-precision
This document reports dimensional inspection results for 17 items against their nominal specifications. It includes the item number, location, nominal dimension, tolerances, inspection method, results of 3 measurements for each item, mean deviation, percentage of tolerance, and acceptance/rejection. The overall First Article Inspection (FAI) acceptance rate is listed at the bottom.
Depositiondata
The document discusses deposition rates, electrode efficiency, and electrode weld metal recovery, which are different metrics for measuring welding consumables. Deposition rate is the rate at which weld metal is deposited, while electrode efficiency is the percentage of filler metal that is deposited. Electrode weld metal recovery allows calculating the percentage of welding consumable that will end up in the finished weld. Tables provide the weight of weld metal deposited per meter for common weld geometries like triangles and rectangles at different thicknesses.
Calameo
The document is an operational efficiency report for a company called Quilca Matarani from October 26th to November 25th. It provides statistics on the hours worked, maintenance time, downtime due to rain, planned downtime, available hours and utilization rates for various pieces of heavy machinery and vehicles used in their operations, including compressors, dump trucks, concrete mixers, water trucks, and loaders. The overall equipment utilization rates ranged from 33% to 99%.
Practica 2
This document contains statistical data about values, sums, counts, and percentages across multiple categories. It includes data about employment sectors and numbers of students and establishments by province in Argentina. The document contains over 30 rows of data with values 1 through 3, sums, counts, and percentages.
Active quotas spring2011
The document shows test and advancement data for various Navy ratings over 3 cycles. It includes the number of test passers, quotas available for advancement, the percentage of passers that were advanced, and the opportunity rate from the last cycle. The majority of ratings had increasing quotas and percentages advanced at higher ranks, though some specialty ratings had limited or no data in the later cycles.
Active duty quotas 2011
The document provides data on test passers, advancement quotas, and opportunity rates for various ratings in the Navy over three cycles. It shows the number of test passers, quotas set for advancement, and historic opportunity rates. Opportunity rates increased or stayed steady for most ratings from the first to third cycle, with some ratings seeing dramatic increases and others remaining low or dropping to zero.
88247_Presentation1.pptx
This document contains data from a particle size analysis test. It includes the aperture size, percentage of mass retained at each aperture, and the cumulative percentage retained and passing. It also contains graphs plotting the log of the aperture size versus the log of the cumulative percentage retained and particle size versus cumulative percentage retained.
LED panel light test report, IES TEST REPORT
LED panel light test report, IES TEST REPORT, 600*600mm LED Panel light, Test Report for high quality lights, if have interesting contact at sales1@luminhome.com, our website: www.luminhome.com
WRI Operating Statement Detail
The document outlines revenue and expenses by line of business for a company in January 2004, showing a total revenue of $259.42 million and total operating expenses of $43.22 million, resulting in operating income of $31.90 million. Cellular commission revenue was the largest source of revenue at $244.27 million while kiosk salary costs were the biggest expense at $58.95 million. The distribution business generated the highest operating income of $24.59 million with an operating margin of 6.5%.
Gam epl h_specsheet
This document provides specifications for the EPL series of gearboxes, including available ratios, torque ratings, speeds, backlash, weight, inertia, efficiency, and dimensions. It lists nominal torque and speed capabilities along with dimensional details such as bolt circle diameters and mounting hole sizes for gearboxes in three different sizes (64, 84, 118) suitable for ratios from 3:1 to 1000:1.
Federer nadal-djokovic-murray
This document provides career statistics for 5 tennis players - Roger Federer, Rafael Nadal, Novak Djokovic, Andy Murray, and Juan Martin del Potro. It includes data on years playing professionally, highest rankings achieved, tournaments played, titles won, Grand Slam performances, win percentages and service/return statistics for each player from 1997-2013. The players are shown to have had highly successful careers, winning numerous titles, reaching number 1 rankings, and performing well at Grand Slams tournaments over their careers spanning 10-16 years.
Harmonic csf lw_specsheet
The document describes a new lightweight version of Harmonic Drive's CSF-2UH gear unit called the CSF-LW. It is 30% lighter than the standard CSF-2UH without reducing torque rating or changing interface dimensions. This increases torque density and makes it suitable for industrial robots, mobile robots, and direct connection to servo motors. It provides specifications and application examples.
caracteristicas_tecnicas_tdl_standard_descargas.pdf
This document contains specifications for various rejas series (grating models). It provides the model codes, dimensions, weights, and load ratings for different rejas configurations with varying distances between supports. The rejas can be customized based on the distance between supports, bar dimensions and spacing, and other parameters. Maximum load ratings and recommended applications are provided for each model depending on the distance between supports.
Shi20396 ch03
Diseno en ingenieria mecanica de Shigley - 8th ---HDes
descarga el contenido completo de aqui http://paralafakyoumecanismos.blogspot.com.ar/2014/08/libro-para-mecanismos-y-elementos-de.html
Assignment help australia
The document discusses using a normal distribution to analyze inventory data from multiple years to better understand inventory levels. It includes calculations of the mean, median, standard deviation, and other measures to compare the data sets and determine which metrics most accurately depict central tendency and dispersion. The analysis would help improve the company's inventory system by better modeling demand variability based on historical data.
000419
This document provides specifications for ELP series aluminum electrolytic capacitors, including:
- Voltage and capacitance ranges from 16-100V and 470uF-47,000uF
- Temperature range of -40°C to +85°C
- Leakage current, dissipation factor, and impedance ratio specifications
- Requirements for capacitance change, dissipation factor, and leakage current after load life and shelf life testing.
Similar to Grading (20)
T2 dimensional evaluation data reporting sheet from hi-precision
T2 dimensional evaluation data reporting sheet from hi-precision
caracteristicas_tecnicas_tdl_standard_descargas.pdf
caracteristicas_tecnicas_tdl_standard_descargas.pdf
Recently uploaded
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaRecently uploaded (20)
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Grading
- 1. Sieve Size (mm) Cummulative Specified Limits as per IS:383 Table 5 (All in Grading) RemarksCoarse aggregates Fine aggregates Total Cobulative Retaing of Per 1000 g % Retained % Passing 62% 38% 100% 0.62 & 0.38, ratio of CA & FA is mixed to achieve grading as per IS 383 table 540 0.00 0.00 0.00 0.00 0.00 100.00 100 20 0.00 0.00 0.00 0.00 0.00 100.00 95-100 10 34.76 0.00 34.76 34.76 34.76 65.24 4.75 58.97 1.14 60.11 60.11 60.11 39.89 30-50 2.36 61.48 8.36 69.84 69.84 69.84 30.16 1.18 62.00 16.87 78.87 78.87 78.87 21.13 0.6 62.00 24.59 86.59 86.59 86.59 13.41 10-35 0.3 62.00 31.01 93.01 93.01 93.01 6.99 0.15 62.00 36.48 98.48 98.48 98.48 1.52 0-6 Sieve Size Weight Cummulative Specified Limits as per IS:383 Table 4
- 2. (mm) Retained Per 1000 g Cobulativ e Retaing of Per 1000 g % Retained % Passing (Grading) Zone-1 Zone-II Zone-III Zone-IV 10 0 gram 0 0 100.00 100 100 100 100 4.75 30 gram 30 3 97.00 90-100 90-100 90-100 95-100 2.36 190 gram 220 22 78.00 60-95 75-100 85-100 95-100 1.18 224 gram 444 44.4 55.60 30-70 55-90 75-100 90-100 0.6 203 gram 647 64.7 35.30 15-34 35-59 60-79 80-100 0.3 169 gram 816 81.6 18.40 5-20 8-30 12-40 15-50 0.15 144 gram 960 96 4.00 0-10 0-10 0-10 0-15 Sieve Size (I) 12 (II)10 Combine Cummulative Specified
- 3. (mm) mm Weight Retained Per 2000 g mm % Weight Retained Per 2000 g Cobulative Retaing of Per 2000 g % Retained % Passing Limits As per IS:383 Table 2 66% 34% 100% 40 0 0 0 0.00 100.00 100 20 0 0 0 0.00 100.00 95-100 10 1560 270 1121.4 56.07 43.93 20-55 4.75 395 1530 780.9 95.12 4.88 0-10 2.36 30 180 81 99.17 0.83