Verolibroo
•
0 likes•61 views
This document contains a table that shows the motion of an object over time. The table lists values for time (t), displacement (x), and height (y) as the object moves under the influence of gravity (g = 9.8 m/s^2) with an initial velocity (Vo) of 150 m/s at an angle (α) of 30 degrees. The maximum time (Tmax) for the motion is 15.306 seconds.
Report
Share
Report
Share
Download to read offline
Recommended
Libro2222
This document contains a table of data with 3 columns - an x-value, a y-value, and a z-value. The x-values increase by increments of 1 from 0 to 15. The y-values decrease non-linearly from 0 to around -3300. The z-values are all 0 except for delineated ranges from -500 to -3500.
Ejercicio
The document contains data from a projectile motion experiment. A projectile was launched at an angle of 30 degrees with an initial velocity of 150 m/s. Data was collected over 15 seconds recording time, x position, and y position. The maximum height reached was 15.306 m.
Wide flange-shape-jisg3192
The document provides specifications for wide flange shapes, including:
- Dimensional specifications and tolerances for various metric sizes
- Chemical composition and mechanical properties of steel grades
- Tables listing the section properties and weights of different wide flange sections
- The specifications are according to the JIS G3192 standard
An Introduction To Tsuyabuhou
A short introduction to Tsuyabuhou, a Japanese literary coterie magazine.
This slide was presented in #sobe2 Conference 2009.
Grading
The document provides grading analysis results for aggregates based on sieve size. It includes three tables showing:
1. Cumulative retained percentages and passing percentages for aggregate materials sieved through various mesh sizes, ranging from 540 mm to 0.15 mm.
2. Cumulative retained weights and percentages for fine aggregate sieved through various mesh sizes from 10 mm to 0.15 mm, with specified limits.
3. Cumulative retained weights and percentages for a combined coarse and fine aggregate sample sieved through various mesh sizes from 40 mm to 2.36 mm, with specified limits.
Millenium Transformer Range2
This document provides specifications for various types of transformers, including dry type EI core transformers, oil distribution transformers, cast resin transformers, power transformers, toroidal transformers, reactors, inductors, and isolation transformers. It includes tables listing technical details like voltage and power ratings, dimensions, weights, losses, and impedance for each product type. The document offers a wide range of transformer solutions and their associated specifications.
Millenium Transformer Range1
The document contains specifications for various types of transformers produced by Millenium Transformers. It includes tables listing technical specifications such as measurements, weights, power ratings, and dimensions for their single phase isolation transformers, three phase isolation transformers, and toroidal transformers in various voltage/amperage configurations. Contact information is provided at the end for inquiries.
Masonry Shear Wall Design-Excel Sheet 2
This document provides design parameters for a LRFD masonry shear wall with axial load. It includes properties of the wall cross-section and reinforcing bars, as well as material properties and design requirements. The wall is subjected to an axial load of 429.66 kips and a factored shear of 104.8 kips. Design checks are performed to verify the wall capacity for the axial and shear loads, and that the calculated strains do not exceed allowable material strain limits. Reinforcing steel is designed to resist a tensile force of 2194.3 kips and a bending moment of 1184923 kip-ft.
Recommended
Libro2222
This document contains a table of data with 3 columns - an x-value, a y-value, and a z-value. The x-values increase by increments of 1 from 0 to 15. The y-values decrease non-linearly from 0 to around -3300. The z-values are all 0 except for delineated ranges from -500 to -3500.
Ejercicio
The document contains data from a projectile motion experiment. A projectile was launched at an angle of 30 degrees with an initial velocity of 150 m/s. Data was collected over 15 seconds recording time, x position, and y position. The maximum height reached was 15.306 m.
Wide flange-shape-jisg3192
The document provides specifications for wide flange shapes, including:
- Dimensional specifications and tolerances for various metric sizes
- Chemical composition and mechanical properties of steel grades
- Tables listing the section properties and weights of different wide flange sections
- The specifications are according to the JIS G3192 standard
An Introduction To Tsuyabuhou
A short introduction to Tsuyabuhou, a Japanese literary coterie magazine.
This slide was presented in #sobe2 Conference 2009.
Grading
The document provides grading analysis results for aggregates based on sieve size. It includes three tables showing:
1. Cumulative retained percentages and passing percentages for aggregate materials sieved through various mesh sizes, ranging from 540 mm to 0.15 mm.
2. Cumulative retained weights and percentages for fine aggregate sieved through various mesh sizes from 10 mm to 0.15 mm, with specified limits.
3. Cumulative retained weights and percentages for a combined coarse and fine aggregate sample sieved through various mesh sizes from 40 mm to 2.36 mm, with specified limits.
Millenium Transformer Range2
This document provides specifications for various types of transformers, including dry type EI core transformers, oil distribution transformers, cast resin transformers, power transformers, toroidal transformers, reactors, inductors, and isolation transformers. It includes tables listing technical details like voltage and power ratings, dimensions, weights, losses, and impedance for each product type. The document offers a wide range of transformer solutions and their associated specifications.
Millenium Transformer Range1
The document contains specifications for various types of transformers produced by Millenium Transformers. It includes tables listing technical specifications such as measurements, weights, power ratings, and dimensions for their single phase isolation transformers, three phase isolation transformers, and toroidal transformers in various voltage/amperage configurations. Contact information is provided at the end for inquiries.
Masonry Shear Wall Design-Excel Sheet 2
This document provides design parameters for a LRFD masonry shear wall with axial load. It includes properties of the wall cross-section and reinforcing bars, as well as material properties and design requirements. The wall is subjected to an axial load of 429.66 kips and a factored shear of 104.8 kips. Design checks are performed to verify the wall capacity for the axial and shear loads, and that the calculated strains do not exceed allowable material strain limits. Reinforcing steel is designed to resist a tensile force of 2194.3 kips and a bending moment of 1184923 kip-ft.
Poster of surveying tasks
This document provides information from a surveying camp, including:
1. Coordinates of existing buildings that were determined through field observations.
2. A table of leveling observations and reduced levels taken along a ground profile.
3. Graphs plotting the building coordinates, ground profile, and layout of a simple circular curve determined through deflection angle calculations.
MasonryShearWall Design-1 Sheet1
This document provides design parameters and calculations for an LRFD masonry shear wall with axial load. It includes properties of the wall cross-section and reinforcing bars, as well as material properties. The calculations check the capacity of the wall to resist the axial load (Pu) and factored bending moment (Mu), and confirm that the nominal strengths exceed the factored demands. Strain in the wall is also checked to be below the allowable maximum.
Entreg p4 karenina
This document contains architectural plans and drawings for a building project including:
- Elevation drawings with height measurements for different floors and sections of the building.
- Site plans showing the layout of the building and surrounding area.
- Section drawings cutting through the building to show its interior structure.
- Shadow diagrams for the building at different times of day.
The drawings are labeled with scales, heights, and orientation references and were created by a student as part of an exercise assignment.
Stainless steel wire mesh
Hebei General Metal Netting Co., Ltd produces various types of stainless steel wire mesh and wire cloth, including square opening mesh ranging from 1 to 635 meshes and cloth ranging from 12x64 mesh to 400x2800 mesh. The document provides details on weaving patterns and specifications for stainless steel wire mesh and cloth, including mesh count, wire diameter, opening size, opening area, and weight for various mesh sizes. Contact information is provided at the end for Hebei General Metal Netting Co., Ltd in China.
Iso 2768-tolerances drawings
The document provides tables specifying permissible deviation limits for various tolerance classes and measurement types in metric units. It includes tolerance limits for linear measures ranging from 0.5-4000mm, angular measures from 10-400mm, and external radii/chamfer heights from 0.5-6mm. A metric thread pitch chart lists standard pitch sizes for bolt threads from M2 to M56.
Arquitectura del computador
El documento presenta un diagrama de los componentes principales de una computadora, incluyendo el monitor, la impresora, el disco de almacenamiento y la tarjeta madre con sus componentes como la CPU y la memoria RAM que codifican y decodifican la información.
Declaração Pessoal de Saúde
Este documento é uma declaração de saúde complementar para um seguro de vida. Contém 21 perguntas sobre histórico médico, estilo de vida e histórico familiar do proponente, incluindo sobre doenças pré-existentes, hábitos de fumar e beber, uso de medicamentos e exames médicos realizados. A declaração deve ser preenchida de próprio punho pelo proponente para fornecer informações verdadeiras que possam influenciar a aceitação da proposta de seguro.
eBook_Impact_Awards_2013
The document summarizes the winners of the 15th Annual Impact Awards presented by ACL to recognize customers achieving outstanding results through the use of ACL software. It provides details on the award categories and lists each winner, describing the organization they work for and how they have leveraged ACL tools to improve audit and analysis work. Key impacts highlighted include increased efficiencies, cost savings, enhanced risk monitoring and fraud detection.
Global entrepreneurship
The document discusses the 2016 Global Entrepreneurship Week (GEW). It notes that 106 countries will participate in over 30,000 events to support entrepreneurs and innovation. The Global Entrepreneurship Index, which evaluates entrepreneurship ecosystems in 132 countries, will also be released during GEW. GEW aims to help launch startups and create innovations that can change the world through competitions and $100 million in donations.
Lib
The document contains a table with two columns of numbers representing x and y coordinates plotted on a graph. The x-values increase by 1 each row from 0 to 15, while the corresponding y-values decrease in a linear fashion from 0 to approximately -3500. A line graph is shown with the x and y coordinates plotted, showing a steady negative linear relationship between the two variables as x increases.
Presentación mata 1
This document contains a table of 15 data points measuring x, y, x^2, y^2, and xy values. It then performs linear regression analysis to find the line of best fit between x and y. The linear regression equation is y = 0.004x + 19.82 with an R^2 value of 0.029, indicating a weak correlation between x and y.
Presentación mata 1
This document contains a table of 15 data points measuring x, y, x^2, y^2, and xy values. It then performs linear regression analysis to find the line of best fit between x and y. The linear regression equation is y = 0.004x + 19.82 with an R^2 value of 0.029, indicating a weak correlation between x and y.
Laporan 1 Sistem dan Signal (DFT Ms. Excel)
Menganalisis gelombang suara manusia dengan merekam suara bernada diatonis pada Software Spectraplus V5.0. lalu mencari persamaan gelombang dengan bantuan pengolahan data Ms. Excel
Tercero c
This document contains two pages of tables with values for sin, cos, and tan functions evaluated at different values. The first page contains values from 1 to 12, and the second page contains values from 1 to 89. For each value, the sin, cos, and tan are provided to 3 decimal places. The tables provide function values for evaluation over a range of inputs.
Share
The document appears to be a table containing stock price and valuation data for multiple companies. It includes columns for stock price, estimated fair price, percentage difference between current and fair price, and other valuation metrics. The table contains data for over 100 stock ticker symbols.
Trazadores
The document contains data from a conductivity test conducted over time on a solution with a concentration of magnesium. It includes measurements of conductivity, concentration, mass, load, and other variables taken at 10 second intervals from 10 to 430 seconds. The data is presented in a table and two graphs show trends in concentration and mass over time.
9 dimension and properties table of upe
The document provides dimensional properties for various UPE-shaped steel beams, including their height, width, wall thickness, flange thickness, area, weight, moments of inertia, and other specifications. Dimensions are given in millimeters and kilograms per meter. Beams range in size from a UPE 80 with a height of 80mm up to a UPE 400 with a height of 400mm.
More Related Content
What's hot
Poster of surveying tasks
This document provides information from a surveying camp, including:
1. Coordinates of existing buildings that were determined through field observations.
2. A table of leveling observations and reduced levels taken along a ground profile.
3. Graphs plotting the building coordinates, ground profile, and layout of a simple circular curve determined through deflection angle calculations.
MasonryShearWall Design-1 Sheet1
This document provides design parameters and calculations for an LRFD masonry shear wall with axial load. It includes properties of the wall cross-section and reinforcing bars, as well as material properties. The calculations check the capacity of the wall to resist the axial load (Pu) and factored bending moment (Mu), and confirm that the nominal strengths exceed the factored demands. Strain in the wall is also checked to be below the allowable maximum.
Entreg p4 karenina
This document contains architectural plans and drawings for a building project including:
- Elevation drawings with height measurements for different floors and sections of the building.
- Site plans showing the layout of the building and surrounding area.
- Section drawings cutting through the building to show its interior structure.
- Shadow diagrams for the building at different times of day.
The drawings are labeled with scales, heights, and orientation references and were created by a student as part of an exercise assignment.
Stainless steel wire mesh
Hebei General Metal Netting Co., Ltd produces various types of stainless steel wire mesh and wire cloth, including square opening mesh ranging from 1 to 635 meshes and cloth ranging from 12x64 mesh to 400x2800 mesh. The document provides details on weaving patterns and specifications for stainless steel wire mesh and cloth, including mesh count, wire diameter, opening size, opening area, and weight for various mesh sizes. Contact information is provided at the end for Hebei General Metal Netting Co., Ltd in China.
Iso 2768-tolerances drawings
The document provides tables specifying permissible deviation limits for various tolerance classes and measurement types in metric units. It includes tolerance limits for linear measures ranging from 0.5-4000mm, angular measures from 10-400mm, and external radii/chamfer heights from 0.5-6mm. A metric thread pitch chart lists standard pitch sizes for bolt threads from M2 to M56.
What's hot (6)
Viewers also liked
Arquitectura del computador
El documento presenta un diagrama de los componentes principales de una computadora, incluyendo el monitor, la impresora, el disco de almacenamiento y la tarjeta madre con sus componentes como la CPU y la memoria RAM que codifican y decodifican la información.
Declaração Pessoal de Saúde
Este documento é uma declaração de saúde complementar para um seguro de vida. Contém 21 perguntas sobre histórico médico, estilo de vida e histórico familiar do proponente, incluindo sobre doenças pré-existentes, hábitos de fumar e beber, uso de medicamentos e exames médicos realizados. A declaração deve ser preenchida de próprio punho pelo proponente para fornecer informações verdadeiras que possam influenciar a aceitação da proposta de seguro.
eBook_Impact_Awards_2013
The document summarizes the winners of the 15th Annual Impact Awards presented by ACL to recognize customers achieving outstanding results through the use of ACL software. It provides details on the award categories and lists each winner, describing the organization they work for and how they have leveraged ACL tools to improve audit and analysis work. Key impacts highlighted include increased efficiencies, cost savings, enhanced risk monitoring and fraud detection.
Global entrepreneurship
The document discusses the 2016 Global Entrepreneurship Week (GEW). It notes that 106 countries will participate in over 30,000 events to support entrepreneurs and innovation. The Global Entrepreneurship Index, which evaluates entrepreneurship ecosystems in 132 countries, will also be released during GEW. GEW aims to help launch startups and create innovations that can change the world through competitions and $100 million in donations.
Viewers also liked (8)
Similar to Verolibroo
Lib
The document contains a table with two columns of numbers representing x and y coordinates plotted on a graph. The x-values increase by 1 each row from 0 to 15, while the corresponding y-values decrease in a linear fashion from 0 to approximately -3500. A line graph is shown with the x and y coordinates plotted, showing a steady negative linear relationship between the two variables as x increases.
Presentación mata 1
This document contains a table of 15 data points measuring x, y, x^2, y^2, and xy values. It then performs linear regression analysis to find the line of best fit between x and y. The linear regression equation is y = 0.004x + 19.82 with an R^2 value of 0.029, indicating a weak correlation between x and y.
Presentación mata 1
This document contains a table of 15 data points measuring x, y, x^2, y^2, and xy values. It then performs linear regression analysis to find the line of best fit between x and y. The linear regression equation is y = 0.004x + 19.82 with an R^2 value of 0.029, indicating a weak correlation between x and y.
Laporan 1 Sistem dan Signal (DFT Ms. Excel)
Menganalisis gelombang suara manusia dengan merekam suara bernada diatonis pada Software Spectraplus V5.0. lalu mencari persamaan gelombang dengan bantuan pengolahan data Ms. Excel
Tercero c
This document contains two pages of tables with values for sin, cos, and tan functions evaluated at different values. The first page contains values from 1 to 12, and the second page contains values from 1 to 89. For each value, the sin, cos, and tan are provided to 3 decimal places. The tables provide function values for evaluation over a range of inputs.
Share
The document appears to be a table containing stock price and valuation data for multiple companies. It includes columns for stock price, estimated fair price, percentage difference between current and fair price, and other valuation metrics. The table contains data for over 100 stock ticker symbols.
Trazadores
The document contains data from a conductivity test conducted over time on a solution with a concentration of magnesium. It includes measurements of conductivity, concentration, mass, load, and other variables taken at 10 second intervals from 10 to 430 seconds. The data is presented in a table and two graphs show trends in concentration and mass over time.
9 dimension and properties table of upe
The document provides dimensional properties for various UPE-shaped steel beams, including their height, width, wall thickness, flange thickness, area, weight, moments of inertia, and other specifications. Dimensions are given in millimeters and kilograms per meter. Beams range in size from a UPE 80 with a height of 80mm up to a UPE 400 with a height of 400mm.
Deforestation situation in portugal
The document discusses forest fires and deforestation in Portugal between 1995 and 2009. It provides data on the number of fires and burnt area each year in hectares and square meters. Major forest fires occurred in Portugal in 2003, 2005, and 2007, burning over 80,000 hectares in some years. A slogan was created in 2007 to increase awareness of fires and new prohibitions were introduced to help reduce fires and deforestation.
Tabelas
This document contains a table showing future value factors for uniform series of posticipated payments at interest rates ranging from 1% to 15% per period over periods of 1 to 33. The future value factor, denoted Sn,i, is calculated as [(1+i)^n] - 1)/i, where n is the number of periods and i is the interest rate per period.
Beca media matrícula feuach 2012
This document is a list of 100 students selected to receive a partial scholarship from FEUACH in 2012. It includes the identification number and total score of each selected student. The students are ranked from 1 to 100 based on their total scores, with the highest scoring student ranked first with a score of 35,372 points.
Primer problema
This document contains a table of data with x and y coordinates, and calculations of x^2, y^2, x*y, standard deviations, correlation coefficient r, coefficient of determination r^2, and a simple x-y scatter plot. It appears to show the results of a linear regression analysis performed on a set of (x,y) data points.
Actividad 1 funcion lineal
The document describes a linear function with an equation of y=2x+20. It provides x and y value pairs that define the linear relationship. It also includes the constants for the equation: slope (K) of 2, y-intercept (D) of 0, and constants (E) of 20, (F) of -10, and (G) of -4. It then generates y values for a range of x values from -4 to 4 using the linear equation.
Metode nakayasu
1. The document describes the Nakayasu unit hydrograph method for calculating peak discharge values. It provides the Nakayasu equation and defines the parameters.
2. It then applies the Nakayasu method to calculate hydrographs for the Deli River basin in Medan, Indonesia using basin characteristics and rainfall data. Discharge values are calculated for different time intervals on the hydrograph curve.
3. Tables of results show the calculated hydrographs for return periods of 2 years and 5 years, with discharge values over time.
Go Ahead for F&O Report 14 March 2013 Mansukh Investment and Trading Solution
Go Ahead for F&O Report 14 March 2013 Mansukh Investment and Trading SolutionMansukh Investment & Trading Solutions
The document appears to be a market report on futures and options covering various stocks and indices in the Indian market. It provides key data points for the expiry date of March 28, 2013 including open interest, changes in open interest, changes in closing price, support and resistance levels, and closing prices for various underlyings like Nifty, Bank Nifty, stocks etc. It summarizes key data on derivatives trading activity and market movements for the date indicated.Analysis on Future levels of Stock by Mansukh Investment and Trading Solution...
Analysis on Future levels of Stock by Mansukh Investment and Trading Solution...Mansukh Investment & Trading Solutions
The Report contains detailed information about the current level of stocks and the changes that took place throughout the day.In order to provide a better understanding it provides information about the Index future and Stock future.The report also contains information about the Future level of stocks and it acts as a guide and teacher for its readers so that they can properly plan out their stocks and investment.Hampton Roads Real Estate Absorption Rates
The document contains data on housing inventory and absorption rates across several cities in Virginia. It shows the number of months it would take to sell the current inventory at the current monthly sales rate for different price ranges in each city from March 2010. For most price ranges, absorption rates were highest between 7-15 months, but increased to over 30 months for some higher price ranges. Chesapeake generally had the highest absorption rates, while Newport News and Norfolk tended to be lower.
6 dimension and properties table of ipe shape
This document provides dimensional properties for various IPE steel beam shapes. It includes dimensions, cross-sectional area, weight, section properties such as moments of inertia, and minimum dimensions for connections. The table lists data for IPE beams ranging from 80 mm to 600 mm, including their height, width, wall thicknesses, and other geometric properties.
Resultados Del Concurso 2010
The document appears to be a report from the Department of Secondary Education in the state of Nayarit, Mexico. It provides statistics on test results from 10 secondary schools in Zone 6, including the number of students, average scores on Spanish, Math and History exams, and overall average scores. Overall exam results were highest for first year students (54.67%) and lowest for second year students (52.34%).
Libro1
The document contains a table that lists angles in both grados and radians along with their corresponding sine, cosine, and tangent values. The table ranges from -180 to 180 degrees or -π to π radians in increments of 4 degrees/radians. It shows how the sine, cosine, and tangent values change as the angle increases, with sine and cosine values ranging from -1 to 1 and tangent values getting larger as the angle approaches π/2 radians.
Similar to Verolibroo (20)
Go Ahead for F&O Report 14 March 2013 Mansukh Investment and Trading Solution
Go Ahead for F&O Report 14 March 2013 Mansukh Investment and Trading Solution
Analysis on Future levels of Stock by Mansukh Investment and Trading Solution...
Analysis on Future levels of Stock by Mansukh Investment and Trading Solution...
Recently uploaded
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
● What is event processing in MuleSoft?
● Types of event processing models in Mule 4
● Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Recently uploaded (20)
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Verolibroo
- 1. 𝑋 = 𝑉𝑜 ∗ 𝑡 ∗ 𝑐𝑜𝑠 y=Vo*t*seno-1/2g*t2 g 9,8 alfa 30 Vinicial 150 2∗𝑉𝑜∗𝑠𝑒𝑛∝ t = 𝑔 Tmax 15,306 t x y 0 0 0 0 1 23,13771748 -153,104744 0 50 100 150 200 250 2 46,27543497 -316,009487 -500 3 69,41315245 -488,714231 4 92,55086993 -671,218974 -1000 5 115,6885874 -863,523718 -1500 6 138,8263049 -1065,62846 7 161,9640224 -1277,53321 -2000 8 185,1017399 -1499,23795 9 208,2394573 -1730,74269 -2500 10 231,3771748 -1972,04744 11 254,5148923 -2223,15218 -3000 12 277,6526098 -2484,05692 13 300,7903273 -2754,76167 -3500 14 323,9280448 -3035,26641 15 347,0657622 -3325,57115
- 2. 250 300 350 400 Series1