Salisbury 4213 Universal Switch Stick
•
0 likes•395 views
This document provides specifications for universal switch sticks, including dimensions, weights, and component details. Universal switch sticks come in one, two, and three section models with diameters of 1.25 inches or 1.5 inches. They range in length from 4 to 20 feet. The one-piece sticks have a universal head, while the multi-section sticks have matching diameters on the top and bottom sections.
Report
Share
Report
Share
Download to read offline
Recommended
Besavne cevi din_2448
This document provides a table listing the weights in kilograms per meter of seamless steel tubes of varying diameters and wall thicknesses according to DIN 2448. The table includes the outer diameter, standard wall thickness, weight in kg/m, and other dimensional specifications for over 50 tube sizes ranging from 10.2 mm outer diameter up to 558.8 mm outer diameter.
Federer nadal-djokovic-murray
This document provides career statistics for 5 tennis players - Roger Federer, Rafael Nadal, Novak Djokovic, Andy Murray, and Juan Martin del Potro. It includes data on years playing professionally, highest rankings achieved, tournaments played, titles won, Grand Slam performances, win percentages and service/return statistics for each player from 1997-2013. The players are shown to have had highly successful careers, winning numerous titles, reaching number 1 rankings, and performing well at Grand Slams tournaments over their careers spanning 10-16 years.
Pipe wall thickness and weight
This document contains a chart listing pipe sizes, outside diameters, wall thicknesses, and weights. The pipe sizes range from 1/8 inch to 72 inches in nominal diameter. For each size, the chart provides the outside diameter in mm and the wall thickness in mm for various standard wall thickness designations including SCH 10, SCH 20, SCH 30, etc. Heavier wall thicknesses are shown for larger pipe sizes.
Anchor bolt load capacities F1554
There is approximately a 20% savings cost for using rolled threads instead of cut thread rods. Per ACI 318 Section D, there is no capacity difference between the two methods of manufacturing when used as anchor bolts set in concrete.
Weight chart for_hexagon_bolts_&_nuts
This document contains a weight chart for hexagon bolts and nuts in various sizes from Dinstock Ltd, a fastener supplier based in the UK. It lists the nominal diameter in millimeters and weights in kilograms for bolt and nut sizes from M12 to M39 over lengths ranging from 60 to 800 millimeters. The chart provides information on the standard weights for common metric bolt and nut sizes.
Weight count chart m.o.
The document provides a conversion table for inches to millimeters. It lists inches in decimal and fractional increments from 0 inches to 1 inch in the left column. The corresponding millimeter measurements are listed in the right column. There are conversion values shown for 64ths of an inch up to 59/64 of an inch.
Petrotrim Pipe Schedules
This chart provides pipe wall thickness and weight information for carbon steel pipes of various sizes. It lists nominal pipe sizes from 1/8 inch to 36 inches along with corresponding minimum wall thicknesses in inches for different pipe standards and classes. It also lists the weight per foot in pounds for each pipe size and wall thickness combination. Additional information is provided for calculating weights of various alloy pipes using provided factors to multiply the carbon steel weights.
Polin monten c
This document provides specifications for various structural steel profiles including their dimensions, weight, cross-sectional area, and other engineering properties. Specifically, it contains this information for steel beams ranging in size from 12 inches by 3 1/2 inches down to 3 inches by 1 3/4 inches, across 10 different sizes and with steel grades ranging from 10 to 14. The specifications include the beam's designation, dimensions, weight, area, section properties like the moment of inertia, and other metrics.
Recommended
Besavne cevi din_2448
This document provides a table listing the weights in kilograms per meter of seamless steel tubes of varying diameters and wall thicknesses according to DIN 2448. The table includes the outer diameter, standard wall thickness, weight in kg/m, and other dimensional specifications for over 50 tube sizes ranging from 10.2 mm outer diameter up to 558.8 mm outer diameter.
Federer nadal-djokovic-murray
This document provides career statistics for 5 tennis players - Roger Federer, Rafael Nadal, Novak Djokovic, Andy Murray, and Juan Martin del Potro. It includes data on years playing professionally, highest rankings achieved, tournaments played, titles won, Grand Slam performances, win percentages and service/return statistics for each player from 1997-2013. The players are shown to have had highly successful careers, winning numerous titles, reaching number 1 rankings, and performing well at Grand Slams tournaments over their careers spanning 10-16 years.
Pipe wall thickness and weight
This document contains a chart listing pipe sizes, outside diameters, wall thicknesses, and weights. The pipe sizes range from 1/8 inch to 72 inches in nominal diameter. For each size, the chart provides the outside diameter in mm and the wall thickness in mm for various standard wall thickness designations including SCH 10, SCH 20, SCH 30, etc. Heavier wall thicknesses are shown for larger pipe sizes.
Anchor bolt load capacities F1554
There is approximately a 20% savings cost for using rolled threads instead of cut thread rods. Per ACI 318 Section D, there is no capacity difference between the two methods of manufacturing when used as anchor bolts set in concrete.
Weight chart for_hexagon_bolts_&_nuts
This document contains a weight chart for hexagon bolts and nuts in various sizes from Dinstock Ltd, a fastener supplier based in the UK. It lists the nominal diameter in millimeters and weights in kilograms for bolt and nut sizes from M12 to M39 over lengths ranging from 60 to 800 millimeters. The chart provides information on the standard weights for common metric bolt and nut sizes.
Weight count chart m.o.
The document provides a conversion table for inches to millimeters. It lists inches in decimal and fractional increments from 0 inches to 1 inch in the left column. The corresponding millimeter measurements are listed in the right column. There are conversion values shown for 64ths of an inch up to 59/64 of an inch.
Petrotrim Pipe Schedules
This chart provides pipe wall thickness and weight information for carbon steel pipes of various sizes. It lists nominal pipe sizes from 1/8 inch to 36 inches along with corresponding minimum wall thicknesses in inches for different pipe standards and classes. It also lists the weight per foot in pounds for each pipe size and wall thickness combination. Additional information is provided for calculating weights of various alloy pipes using provided factors to multiply the carbon steel weights.
Polin monten c
This document provides specifications for various structural steel profiles including their dimensions, weight, cross-sectional area, and other engineering properties. Specifically, it contains this information for steel beams ranging in size from 12 inches by 3 1/2 inches down to 3 inches by 1 3/4 inches, across 10 different sizes and with steel grades ranging from 10 to 14. The specifications include the beam's designation, dimensions, weight, area, section properties like the moment of inertia, and other metrics.
Discount how it affects your business
This document shows how different discount percentages affect profit margins and the percentage increase in sales needed to offset profit losses from discounts. Discounts of 5-30% require sales increases of 2.2-900% to maintain the same gross profit, while discounts over 30% require even larger sales volume gains. The author advises businesses to consider how discounts impact profits before applying them.
Kombat Copper September 2015 Corporate Presentation
- The document reports on results from 35 drill holes completed in 2015 exploring the Kombat Mine area in Namibia. Significant copper, lead and silver mineralization was intersected in many of the holes.
- Highlights include Hole K15-004 which intersected 19 meters of 0.97% copper and 11.58 g/t silver, and Hole K15-015 which intersected 2.34 meters of 16.31% copper and 75.34 g/t silver.
- The Kombat Mine has operated since 1976 and produces copper and silver from a series of underground shafts and open pits. Drilling is testing for additional resources near the existing mine workings.
Catalogo
This document appears to be a catalog from a Mexican steel company called Aceros Alcalde. It lists the company's contact information and locations, and provides a detailed catalog of the various steel products it offers for sale, including angles, flats, structural shapes, pipes, plates, wire, and other items. It also includes specifications like dimensions, weights, and technical information for the different products.
Polegada milimetro
The document is a conversion table listing equivalencies between pole inches and millimeters. It provides over 100 measurements ranging from 1/128th of an inch to 1 inch in increments of 1/128th of an inch. For each pole inch measurement, the equivalent millimeter measurement is provided. The table is intended to help with conversions between the two unit systems.
Tabla pt amonia
This document is a table providing temperature and pressure values for anhydrous ammonia (NH3) over a range of temperatures from -60°F to 120°F. The table lists the temperature in both Fahrenheit and Celsius, along with the corresponding pressure measured in pounds per square inch absolute (PSIA) and gauge (PSIG) and kilograms per square centimeter. Additional information at the bottom provides contact information for SERVICIOS INDUSTRIALES EN REFRIGERACION, S.A. DE C.V., the apparent creator of the table.
Tabla de Equivalencias (Brocas)
The document is a table that provides equivalencies between fractional, metric, numeric and alphabetical measurements. It includes common drill bit, tap and bolt sizes in both imperial and metric units. For example, it shows that #80 in decimal is 0.0135 inches, and is equivalent to 0.35mm and M1.6x0.35. It also includes information on pipe thread sizes and their decimal and NPT equivalents.
F.table
The document contains a table of numbers organized in rows and columns. The first column contains probability values from 0.1 to 0.005 decreasing by factors of 2. The remaining columns contain sets of numbers that decrease as the probability values decrease.
2011 Paid vs Organic CTRs
This document contains multiple data tables reporting on search engine optimization (SEO) and pay-per-click (PPC) advertising campaign performance from 2006, 2011, and a hypothetical campaign. The tables show click-through rates by ad position over time have decreased for top positions but increased for lower positions. A hypothetical campaign saw an overall 65.5% click-through rate, with 80.1% from natural search and 19.9% from paid ads.
Aceros sisa tabla de conversion mm a pulg
This document provides a conversion table from inches to millimeters. It lists various fractional and decimal inch measurements in the left column and their equivalent in millimeters in the right column, ranging from 1/64" to 63/64". Additionally, it includes contact information for Servicio Industrial, S.A. de C.V. at the top regarding their products and services in tool steels and machined/ground industrial parts.
Grading
The document provides grading analysis results for aggregates based on sieve size. It includes three tables showing:
1. Cumulative retained percentages and passing percentages for aggregate materials sieved through various mesh sizes, ranging from 540 mm to 0.15 mm.
2. Cumulative retained weights and percentages for fine aggregate sieved through various mesh sizes from 10 mm to 0.15 mm, with specified limits.
3. Cumulative retained weights and percentages for a combined coarse and fine aggregate sample sieved through various mesh sizes from 40 mm to 2.36 mm, with specified limits.
pipe shedule chart
This document provides specifications for pipe dimensions including nominal pipe size, outside diameter, schedule/wall thickness, and weight. It lists pipe sizes from 1/8 inch to 2-1/2 inches in nominal increments along with the corresponding dimensions and weights in both US customary and metric units. A wide variety of schedule designations are specified for each size providing variation in wall thickness and therefore weight.
106成績人數累計
The document appears to be statistics on exam scores from the 106th academic year for unspecified subjects. It provides data on the number and percentage of students who scored within given ranges, cumulatively from the highest to lowest scores. For example, it shows that for scores from 100-100.99, 1 student scored in that range, making up 0% of the total 45,290 students.
Inches to-millimeters-conversion-chart
This document contains a conversion chart that lists inches and the corresponding values in millimeters. It provides conversions from 0.1 inches up to 1000 inches in increments of 1 inch. For each inch measurement, the equivalent millimeter measurement is given. At the bottom is a note about a sister website for world time zones.
UTP Product Range Rev 04
This document contains a table listing pipe dimensions including outer diameter, wall thickness, and number per foot in both inches and millimeters. It also lists specifications for oil country tubular goods (OCTG) and linepipe ranges. Additional information is provided on process, specifications, chemistries, lengths, and contact information for a manufacturer's representative.
Process stream table.xlsx
The document contains sensor data from a chemical process stream including pressure, temperature, mass flow rates, molar flow rates, and composition measurements over time. The stream contains a mixture of chemicals including ethylbenzene, styrene, hydrogen, benzene, toluene, ethylene, carbon monoxide, carbon dioxide, methane, and water. Pressure and temperature fluctuate within a given range over the measurement period. Mass and molar flow rates also vary for the different components in the stream.
Inch To Millimeter Conversion Table
This document contains several conversion tables for converting between decimals, fractions, and millimeters. It includes tables for converting decimals to millimeters from 0.001 to 1.000 mm, fractions to their decimal equivalents and then to millimeters, and common fractions to their decimal equivalents and millimeters.
002 apicasing
This document provides specifications for oilfield casing including sizes ranging from 7 3/4 to 13 5/8 inches, weights ranging from 16.6 to 88.2 lbs/ft, drift diameters, capacities in barrels per 100 feet, and other details. It lists physical properties and performance metrics for different casing strings to aid in well design and construction.
BASIC STATISTIC
1.HISTOGRAM & FREQUENCY CURVE
2.HISTOGRAM & FREQUENCY POLYGON
3.ARITHMETIC MEAN
4.GEOMETRIC MEAN
5.HARMONIC MEAN
6.MEDIAN
7.MODE
8.QAURTILE
9.DECILE
10.PERCENTILE
11.OGIVE : LESS THAN
12.OGIVE : MORE THAN
13.QUARTILE DEVIATION
14.MEAN DEVIATION
15.MEDIAN DEVIATION
Bilancio (14)
This document provides a summary of funding amounts for various regional laws and programs in Italy from 1982 to 2008. It shows the total amounts funded each year from various sources, including ordinary and special management funds as well as funds from different regional laws. The totals funded increased over time, reaching over 166 million euros in 2008. Approximately 55% of total funding each year was considered "at risk funding".
Technical data SIGHTRON SIII FT MOA-2 Riflescopes Reticles Subtensions | Opti...
The document provides dimensions and specifications for the illuminated MOA-2 reticle in an SIII scope at various magnifications. It lists the measurements in minutes of angle (MOA) at 50 yards for different elements of the reticle, including the width of windage bars, the space above and below the center line, the spacing between markings, and the diameter of the center dot. It also notes the MOA height and width of the 10 MOA and 2 MOA bars for windage and elevation.
Ella
La Universidad Técnica certifica que Luis Vargas Torres completó con éxito el curso de Nivelación en el segundo semestre de 2015. El estudiante fue Mirella Elizabeth Odelanti y obtuvo una calificación de Bueno.
More Related Content
What's hot
Discount how it affects your business
This document shows how different discount percentages affect profit margins and the percentage increase in sales needed to offset profit losses from discounts. Discounts of 5-30% require sales increases of 2.2-900% to maintain the same gross profit, while discounts over 30% require even larger sales volume gains. The author advises businesses to consider how discounts impact profits before applying them.
Kombat Copper September 2015 Corporate Presentation
- The document reports on results from 35 drill holes completed in 2015 exploring the Kombat Mine area in Namibia. Significant copper, lead and silver mineralization was intersected in many of the holes.
- Highlights include Hole K15-004 which intersected 19 meters of 0.97% copper and 11.58 g/t silver, and Hole K15-015 which intersected 2.34 meters of 16.31% copper and 75.34 g/t silver.
- The Kombat Mine has operated since 1976 and produces copper and silver from a series of underground shafts and open pits. Drilling is testing for additional resources near the existing mine workings.
Catalogo
This document appears to be a catalog from a Mexican steel company called Aceros Alcalde. It lists the company's contact information and locations, and provides a detailed catalog of the various steel products it offers for sale, including angles, flats, structural shapes, pipes, plates, wire, and other items. It also includes specifications like dimensions, weights, and technical information for the different products.
Polegada milimetro
The document is a conversion table listing equivalencies between pole inches and millimeters. It provides over 100 measurements ranging from 1/128th of an inch to 1 inch in increments of 1/128th of an inch. For each pole inch measurement, the equivalent millimeter measurement is provided. The table is intended to help with conversions between the two unit systems.
Tabla pt amonia
This document is a table providing temperature and pressure values for anhydrous ammonia (NH3) over a range of temperatures from -60°F to 120°F. The table lists the temperature in both Fahrenheit and Celsius, along with the corresponding pressure measured in pounds per square inch absolute (PSIA) and gauge (PSIG) and kilograms per square centimeter. Additional information at the bottom provides contact information for SERVICIOS INDUSTRIALES EN REFRIGERACION, S.A. DE C.V., the apparent creator of the table.
Tabla de Equivalencias (Brocas)
The document is a table that provides equivalencies between fractional, metric, numeric and alphabetical measurements. It includes common drill bit, tap and bolt sizes in both imperial and metric units. For example, it shows that #80 in decimal is 0.0135 inches, and is equivalent to 0.35mm and M1.6x0.35. It also includes information on pipe thread sizes and their decimal and NPT equivalents.
F.table
The document contains a table of numbers organized in rows and columns. The first column contains probability values from 0.1 to 0.005 decreasing by factors of 2. The remaining columns contain sets of numbers that decrease as the probability values decrease.
2011 Paid vs Organic CTRs
This document contains multiple data tables reporting on search engine optimization (SEO) and pay-per-click (PPC) advertising campaign performance from 2006, 2011, and a hypothetical campaign. The tables show click-through rates by ad position over time have decreased for top positions but increased for lower positions. A hypothetical campaign saw an overall 65.5% click-through rate, with 80.1% from natural search and 19.9% from paid ads.
Aceros sisa tabla de conversion mm a pulg
This document provides a conversion table from inches to millimeters. It lists various fractional and decimal inch measurements in the left column and their equivalent in millimeters in the right column, ranging from 1/64" to 63/64". Additionally, it includes contact information for Servicio Industrial, S.A. de C.V. at the top regarding their products and services in tool steels and machined/ground industrial parts.
Grading
The document provides grading analysis results for aggregates based on sieve size. It includes three tables showing:
1. Cumulative retained percentages and passing percentages for aggregate materials sieved through various mesh sizes, ranging from 540 mm to 0.15 mm.
2. Cumulative retained weights and percentages for fine aggregate sieved through various mesh sizes from 10 mm to 0.15 mm, with specified limits.
3. Cumulative retained weights and percentages for a combined coarse and fine aggregate sample sieved through various mesh sizes from 40 mm to 2.36 mm, with specified limits.
pipe shedule chart
This document provides specifications for pipe dimensions including nominal pipe size, outside diameter, schedule/wall thickness, and weight. It lists pipe sizes from 1/8 inch to 2-1/2 inches in nominal increments along with the corresponding dimensions and weights in both US customary and metric units. A wide variety of schedule designations are specified for each size providing variation in wall thickness and therefore weight.
106成績人數累計
The document appears to be statistics on exam scores from the 106th academic year for unspecified subjects. It provides data on the number and percentage of students who scored within given ranges, cumulatively from the highest to lowest scores. For example, it shows that for scores from 100-100.99, 1 student scored in that range, making up 0% of the total 45,290 students.
Inches to-millimeters-conversion-chart
This document contains a conversion chart that lists inches and the corresponding values in millimeters. It provides conversions from 0.1 inches up to 1000 inches in increments of 1 inch. For each inch measurement, the equivalent millimeter measurement is given. At the bottom is a note about a sister website for world time zones.
UTP Product Range Rev 04
This document contains a table listing pipe dimensions including outer diameter, wall thickness, and number per foot in both inches and millimeters. It also lists specifications for oil country tubular goods (OCTG) and linepipe ranges. Additional information is provided on process, specifications, chemistries, lengths, and contact information for a manufacturer's representative.
Process stream table.xlsx
The document contains sensor data from a chemical process stream including pressure, temperature, mass flow rates, molar flow rates, and composition measurements over time. The stream contains a mixture of chemicals including ethylbenzene, styrene, hydrogen, benzene, toluene, ethylene, carbon monoxide, carbon dioxide, methane, and water. Pressure and temperature fluctuate within a given range over the measurement period. Mass and molar flow rates also vary for the different components in the stream.
Inch To Millimeter Conversion Table
This document contains several conversion tables for converting between decimals, fractions, and millimeters. It includes tables for converting decimals to millimeters from 0.001 to 1.000 mm, fractions to their decimal equivalents and then to millimeters, and common fractions to their decimal equivalents and millimeters.
002 apicasing
This document provides specifications for oilfield casing including sizes ranging from 7 3/4 to 13 5/8 inches, weights ranging from 16.6 to 88.2 lbs/ft, drift diameters, capacities in barrels per 100 feet, and other details. It lists physical properties and performance metrics for different casing strings to aid in well design and construction.
BASIC STATISTIC
1.HISTOGRAM & FREQUENCY CURVE
2.HISTOGRAM & FREQUENCY POLYGON
3.ARITHMETIC MEAN
4.GEOMETRIC MEAN
5.HARMONIC MEAN
6.MEDIAN
7.MODE
8.QAURTILE
9.DECILE
10.PERCENTILE
11.OGIVE : LESS THAN
12.OGIVE : MORE THAN
13.QUARTILE DEVIATION
14.MEAN DEVIATION
15.MEDIAN DEVIATION
Bilancio (14)
This document provides a summary of funding amounts for various regional laws and programs in Italy from 1982 to 2008. It shows the total amounts funded each year from various sources, including ordinary and special management funds as well as funds from different regional laws. The totals funded increased over time, reaching over 166 million euros in 2008. Approximately 55% of total funding each year was considered "at risk funding".
Technical data SIGHTRON SIII FT MOA-2 Riflescopes Reticles Subtensions | Opti...
The document provides dimensions and specifications for the illuminated MOA-2 reticle in an SIII scope at various magnifications. It lists the measurements in minutes of angle (MOA) at 50 yards for different elements of the reticle, including the width of windage bars, the space above and below the center line, the spacing between markings, and the diameter of the center dot. It also notes the MOA height and width of the 10 MOA and 2 MOA bars for windage and elevation.
What's hot (20)
Kombat Copper September 2015 Corporate Presentation
Kombat Copper September 2015 Corporate Presentation
Technical data SIGHTRON SIII FT MOA-2 Riflescopes Reticles Subtensions | Opti...
Technical data SIGHTRON SIII FT MOA-2 Riflescopes Reticles Subtensions | Opti...
Viewers also liked
Ella
La Universidad Técnica certifica que Luis Vargas Torres completó con éxito el curso de Nivelación en el segundo semestre de 2015. El estudiante fue Mirella Elizabeth Odelanti y obtuvo una calificación de Bueno.
DermMedica
Our most recognized and popular procedures are CoolSculpting® for non-invasive fat removal, Botox Cosmetic, Juvederm Fillers, Laser Tattoo Removal and SmartSkin laser skin resurfacing and rejuvenation. These are all, minimally or non-invasive technologies that provide exceptional results for the right patient.
http://www.dermmedica.ca/
AASR 18th Degree Officer Collar
AASR 18th Degree Officer Collar
Email us for order : info@masonicregaliaintl.com
Licencias Creative Commons
Las licencias Creative Commons permiten a los autores especificar cómo pueden ser usados y compartidos sus trabajos. Este documento describe la licencia Atribución – No Comercial – No Obras Derivadas, la cual requiere que el autor sea citado, que el trabajo no sea modificado y que no sea usado con fines comerciales. El autor seleccionó esta licencia para su blog para asegurar que la información solo sea usada con fines educativos sin modificaciones o con ganancias.
Sample - Common Level Ratios for Assessment Appeals
This document provides common level ratios for several counties in Pennsylvania as of June 29, 2016. Allegheny County had the highest common level ratio at 87.1% while Butler County had the lowest at 10.9%. The common level ratios indicate the percentage of fair market value at which property in each county is assessed for tax purposes.
New constitution - what principles should guide our business?
We're working on a new constitution, or set of principles, designed to guide Bloom through the next stage of growth. All thoughts gratefully received.
E-waste
E-waste means any discarded electronic devices or its parts like computers, printers, cell phones, pagers, photocopier, digital photo, music devices, toys and televisions.
Introducing salesforce shield - Paris Salesforce Developer Group - Oct 15
Introducing salesforce shield - Paris Salesforce Developer Group - Oct 15Paris Salesforce Developer Group
The document introduces Salesforce Shield, which provides new services to help customers build trusted applications securely and fast. It describes the analytics and actions capabilities of Event Monitoring within Salesforce Shield. Event Monitoring allows customers to gain visibility into user actions, generate security policies from analytics, and automate real-time actions from those policies. An example is provided around limiting concurrent login sessions using Event Monitoring's analytics to understand login behaviors and its actions to enforce session constraints.Viewers also liked (10)
Sample - Common Level Ratios for Assessment Appeals
Sample - Common Level Ratios for Assessment Appeals
New constitution - what principles should guide our business?
New constitution - what principles should guide our business?
Introducing salesforce shield - Paris Salesforce Developer Group - Oct 15
Introducing salesforce shield - Paris Salesforce Developer Group - Oct 15
Similar to Salisbury 4213 Universal Switch Stick
Wiha Shop Tools Catalog
This document provides an index and descriptions for various professional shop tools made by Wiha, including wrenches, sockets, hammers, and other tools. It lists various sets of open-end wrenches in both metric and inch sizes made of high-performance steel. The wrenches are precision formed for an exact fit and satin chromed for durability. Various wrench sets and individual wrenches are shown along with specifications like size, weight, and packaging.
IMPACT PRODUCTS FROM INTEGRITY
The document provides specifications for various window and door models from Integrity, including their dimensions and sizes. It lists measurements such as width, height, and clear opening area for double hung windows, egress windows, and outswing french doors ranging from smaller to larger sizes. Contact information is provided at the bottom for the Integrity dealer or website for more information.
H4.0 5.5 ft-en-kubota
This document provides specification data for Fortens brand counterbalanced lift trucks with lift capacities ranging from 4,000 to 5,500 kg and lift heights from 4.0 to 5.5 feet. It includes detailed technical specifications across multiple categories such as performance data, dimensions, tires/chassis, weights, and distinguishing marks. Specification data is based on VDI 2198 standard.
ES&FX.singlepweb email
This document provides information about Eastern Screw Co., a manufacturer and supplier of stainless steel fasteners. It summarizes their capabilities including manufacturing a wide range of fastener types in various materials, diameters and lengths. It also details their inventory, locations, services, and machining capabilities.
Talleres lectoescritura mayo 7
This document appears to be a table containing the grades and scores of 103 students on various grammar workshops and exercises. It lists the student ID numbers along with their scores on different components of the workshops including connectors, deixis, corrections, inferences, and more. The scores range from 0 to 5.
AIS Torque Cal, Torque Chart and Bolting Pattern.pdf
The document provides information on bolt stress, pressure, length, and diameter conversion factors. It includes a table with specifications for various bolt sizes including diameter, length, yield strength, torque values, and references. It also details calculations for determining bolt load and torque values based on factors like bolt material, lubricant used, and other specifications.
Bobco metals product catalog
Full product list of bobcometal.com serving business and home users for more than 7 decades now and among the oldest metal companies in Los Angeles, journey from metal scrap yard to the leading supplier of cut to size metals especially steel, stainless steel, aluminum and hardware to businesses and home users was tireless but dedication and hard work of all stake holders associated with the company made the dream come true.
O-RING sizes
This document provides information on O-ring sizes from Ningbo Jiaodian Sealing Industry Co.,Ltd. It lists over 390 O-ring sizes with their inner diameter, cross-sectional thickness, and applicable standards. Most sizes are listed with inner diameter x cross-sectional thickness in millimeters. Materials include NBR, FKM, and EPDM with hardness from 50-90.
ключи динамометрические и мультипликаторы
The document appears to be a catalog listing various tools including hole cutters, torque multipliers, screwdrivers, torque wrenches, and an electronic torque meter/wrench. Over 50 products are detailed across multiple pages with specifications like size, torque range, and item number. Product lines include items 451, 452, 560, 561-567, 581-583, 588-598, and 599DGT.
Modelo de Tornillos de Bolas de DRE de China.
- Dalian Running Engineering produces high-quality ball screws for linear motion applications. Their ball screws offer smooth operation, high rigidity and preload, and high durability.
- The document provides specifications for various ball screw models with different diameters, lead sizes, load capacities, and other dimensions. Precision ball screws from DRE can achieve both low operating torque and high rigidity.
GWC Valve International Triple Offset Butterfly Valves
GWC line of Triple Offset Butterfly valves are available in a wide range of pressure class, materials and body configurations. This product is designed for Bi-directional Bubble Tight Shutoff being fully engineered and manufactured to exceed our clients stringent process requirements.
Seun Sambath-ACI 318-05 Mathcad in Concrete Structures (2010)
This document provides information on construction management and concrete structural design based on ACI 318-05 standards. It includes chapters on topics like unit conversion, material properties, load calculations, design of beams, columns, footings, slabs, and other structural elements. The document was authored by Seun Sambath with an address in Phnom Penh, Cambodia and includes both English and metric unit conversions and examples.
Torque-Tension Reference Guide (1).pdf
This document provides torque and tension specifications for various bolt sizes and materials, including:
- Coarse and fine thread bolt sizes from 1/4" to 1-1/2" in diameter made of steel grades 307A, 5, 8, and 9.
- Locknut and flange nut specifications for coarse thread steel nuts.
- Electrodeposited zinc and lubricated prevailing-torque all-metal nut specifications from M4 to M36.
- Metric fastener clamp load and torque specifications for ASTM A574 from #1 to #4 screw sizes.
Tightening torque values are provided in inch-pounds or foot-pounds depending on the size based on torque
1. talleres lectoescritura
This document appears to be a table containing the grades for various students on grammar exercises in a course at the University of Antioquia. There are 85 rows listing student IDs and their grades ranging from 0 to 5 on exercises involving inferences, connectors, deixis, language corrections, and other unspecified categories. The table is titled "Grammar Workshop Grade Relationship" and lists the professor's name.
Friction loss tables
The document provides charts for calculating pipe friction loss based on pipe material, size, and flow rate. It gives equivalent lengths of common pipe fittings in terms of straight pipe lengths. It also provides charts listing the loss in head pressure per 100 feet of pipe for various pipe sizes, materials, and flow rates. The charts can be used to calculate pressure losses from friction in pipe systems.
Data logging heart rate
This document compares the heart rates of two people, Ong and Mei Ping, before and after exercise using a pulse sensor and data logger. The results show that Ong, who weighs less, has a lower heart rate at rest but a higher heart rate after exercise compared to Mei Ping. The experiment demonstrates how exercise causes an increase in heart rate and how those with lower body weights tend to have higher heart rates in response to physical activity.
Data logging heart rate
This document compares the heart rates of two people, Ong and Mei Ping, before and after exercise using a pulse sensor and data logger. The results show that Ong, who weighs less, has a lower heart rate at rest but a higher heart rate after exercise compared to Mei Ping. The experiment demonstrates how exercise causes an increase in heart rate and how those with lower body weights tend to have higher heart rates in response to physical activity.
Data logging- heart rate
This document compares the heart rates of two people, Ong and Mei Ping, before and after exercise using a pulse sensor and data logger. The results show that Ong, who weighs less, has a lower heart rate at rest but a higher heart rate after exercise compared to Mei Ping. The experiment demonstrates how exercise causes an increase in heart rate and how those with lower body weights tend to have higher heart rates in response to physical activity.
Salisbury 4007 Insulated Clampstick
This document provides specifications for various fiberglass clampsticks, including their catalog numbers, lengths, weights, and features. It lists twelve external rod clampstick models ranging from 4'8" to 14'8" in length and weighing between 4.2 to 9.4 pounds. One additional model is a 6'6" plain cap clampstick. All are made of closed cell foam-filled tubular fiberglass and have tough thermoplastic or rubber ends. They meet ASTM standards and can be ordered with different head fittings attached.
Rev1.0
This document provides information and equations for computing the stiffness matrix of a finite element made up of 4 identical triangles. It defines the geometry and material properties of the element. It then shows the calculations to derive the elasticity matrix coefficients and the individual components of the stiffness matrix based on the geometry, properties, and equations provided. The stiffness matrix is then computed for a given example where N=5. Forces on the element are also calculated based on the pressures and geometry.
Similar to Salisbury 4213 Universal Switch Stick (20)
AIS Torque Cal, Torque Chart and Bolting Pattern.pdf
AIS Torque Cal, Torque Chart and Bolting Pattern.pdf
GWC Valve International Triple Offset Butterfly Valves
GWC Valve International Triple Offset Butterfly Valves
Seun Sambath-ACI 318-05 Mathcad in Concrete Structures (2010)
Seun Sambath-ACI 318-05 Mathcad in Concrete Structures (2010)
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Recently uploaded (20)
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Salisbury 4213 Universal Switch Stick
- 1. Universal Switch Sticks FRP Splices with Button Cat. No. Dimensions: Dia. x Length Weight ea. lbs. kgs O NE S ECTION in x ft. mm x m 4213 1.25 x 4 31.7 x 1.2 2.6 1.2 4214 1.25 x 6 31.7 x 1.8 3.4 1.5 4215 1.25 x 8 31.7 x 2.4 4.1 1.9 4216 1.25 x 10 31.7 x 3 4.9 2.2 4217 1.25 x 12 31.7 x 3.6 5.6 2.5 4218 1.25 x 14 31.7 x 4.3 6.4 2.9 4219 1.5 x 8 38.1 x 2.4 5.4 2.5 4220 1.5 x 10 38.1 x 3 6.5 3 4221 1.5 x 12 38.1 x 3.6 7.5 3.4 4222 1.5 x 14 38.1 x 4.3 8.6 3.9 4223 1.5 x 16 38.1 x 4.9 9.8 4.3 4225 1.5 x 20 38.1 x 6 11.7 5.3 T WO S ECTIONS OAL Length Top Bottom lbs. kgs ft. m in. x ft. mm x m in. x ft. mm x m 4036 8 2.4 1.25 x 4 31.7 x 1.2 1.25 x 4 31.7 x 1.2 4.2 1.9 4037 10 3 1.25 x 5 31.7 x 1.5 1.25 x 5 31.7 x 1.5 5.2 2.2 4038 12 3.6 1.25 x 6 31.7 x 1.8 1.5 x 6 38.1 x 1.8 6.9 3.1 4039 14 4.3 1.25 x 6 31.7 x 1.8 1.5 x 8 38.1 x 2.4 7.9 3.1 4040 16 4.9 1.25 x 8 31.7 x 2.4 1.5 x 8 38.1 x 2.4 8.6 3.9 4041 18 5.5 1.25 x 8 31.7 x 2.4 1.5 x 10 38.1 x 3 9.6 4.4 4042 20 6 1.25 x 10 31.7 x 3 1.5 x 10 38.1 x 3 10.4 4.7 T HREE S ECTION OAL Length Top Middle / Bottom lbs. kgs ft. m in x ft. mm x m in. x ft. mm x m 4043 12 3.6 1.25 x 4 31.7 x 1.2 1.5 x 4 38.1 x 1.2 7.7 3.5 4044 15 4.6 1.25 x 5 31.7 x 1.5 1.5 x 5 38.1 x 1.5 9.1 4.1 4045 18 5.5 1.25 x 6 31.7 x 1.8 1.5 x 6 38.1 x 1.8 10.5 4.7 4046 20 6 1.25 x 8 31.7 x 2.4 1.5 x 6 38.1 x 1.8 16.5 7.5 HEAD O NLY 9840 1.25 31.7 Universal Head 0.2 0.1 9841 1.5 38.1 Universal Head 0.3 0.1 9971 Prong9969 Prong One, two, and three section hot sticks have a standard splined universal head. 1.25” dia. switch sticks are supplied with a #9971 Prong. A Heavy Duty Disconnect Prong #9969 is supplied on all others. Universal Switch Stick Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.cablejoints.co.uk www.thorneanderrick.co.uk