88247_Presentation1.pptx
•Download as PPTX, PDF•
0 likes•2 views
This document contains data from a particle size analysis test. It includes the aperture size, percentage of mass retained at each aperture, and the cumulative percentage retained and passing. It also contains graphs plotting the log of the aperture size versus the log of the cumulative percentage retained and particle size versus cumulative percentage retained.
Report
Share
Report
Share
Recommended
kupdf.net_indian-steel-table.pdf
The document is a table providing information on the dimensions and properties of rolled steel equal angles, including their thickness, cross-sectional area, weight per meter, center of gravity, distance of extreme fibres, radii of gyration, modulus of section, and other geometric properties. The table contains this data for various ISA (Indian Standard Association) steel angle sizes ranging from ISA 2020 to ISA 7070.
Diseño Plancha Extrema - End Plate
Diseño de uniones plancha extrema (End Plate) 4E, 4ES Y 8ES según norma “ANSI/AISC 358-16” (uniones precalificadas).
Torque pernos
The document provides tables with specifications for tightening threaded joints including:
- Metric thread sizes from M12 to M48 with recommended torque values in kgm.
- Imperial thread sizes from 1/2” to 2” UNC/UNF with torque values in lb-ft.
The tables include nominal diameter, thread pitch, material load ratings, preload force values, and recommended torque for proper installation of threaded fasteners.
Grading
The document provides grading analysis results for aggregates based on sieve size. It includes three tables showing:
1. Cumulative retained percentages and passing percentages for aggregate materials sieved through various mesh sizes, ranging from 540 mm to 0.15 mm.
2. Cumulative retained weights and percentages for fine aggregate sieved through various mesh sizes from 10 mm to 0.15 mm, with specified limits.
3. Cumulative retained weights and percentages for a combined coarse and fine aggregate sample sieved through various mesh sizes from 40 mm to 2.36 mm, with specified limits.
TabelBaja1.pdf
This document provides standard dimensions, sectional properties, and characteristics of H-steel sections. It includes dimensions such as depth, width, thickness, radius, and area. Sectional properties included are sectional area, unit weight, moment of inertia, radius of gyration, and compactness criteria. Characteristics such as yield strength are also provided, varying based on thickness of the steel. Over 50 H-steel section dimensions are defined.
Tabel baja standard
This document provides specifications for wide flange steel shapes, including:
1) Dimensional specifications and properties like cross-sectional area, moments of inertia, radii of gyration, and modulus of section for various steel sizes.
2) Tolerances for dimensions of widths, depths, thicknesses.
3) Chemical composition and mechanical properties for different grades of steel.
4) Table of weights in kg/m and kg/12m for common hot rolled beam, wide flange, and H-beam sizes.
Millenium Transformer Range1
The document contains specifications for various types of transformers produced by Millenium Transformers. It includes tables listing technical specifications such as measurements, weights, power ratings, and dimensions for their single phase isolation transformers, three phase isolation transformers, and toroidal transformers in various voltage/amperage configurations. Contact information is provided at the end for inquiries.
2 parte de la pregunta 2
This document contains information about maximum annual precipitation in 24 hours for various return periods (2, 3, 5, 10, 20 etc. years) using different distribution methods. It provides precipitation data, intensities for different durations (20 to 240 minutes), and rainfall calculations using the rational method for a 35 year return period with a 15 minute storm duration. The calculated discharge is 24.88 m3/s.
Recommended
kupdf.net_indian-steel-table.pdf
The document is a table providing information on the dimensions and properties of rolled steel equal angles, including their thickness, cross-sectional area, weight per meter, center of gravity, distance of extreme fibres, radii of gyration, modulus of section, and other geometric properties. The table contains this data for various ISA (Indian Standard Association) steel angle sizes ranging from ISA 2020 to ISA 7070.
Diseño Plancha Extrema - End Plate
Diseño de uniones plancha extrema (End Plate) 4E, 4ES Y 8ES según norma “ANSI/AISC 358-16” (uniones precalificadas).
Torque pernos
The document provides tables with specifications for tightening threaded joints including:
- Metric thread sizes from M12 to M48 with recommended torque values in kgm.
- Imperial thread sizes from 1/2” to 2” UNC/UNF with torque values in lb-ft.
The tables include nominal diameter, thread pitch, material load ratings, preload force values, and recommended torque for proper installation of threaded fasteners.
Grading
The document provides grading analysis results for aggregates based on sieve size. It includes three tables showing:
1. Cumulative retained percentages and passing percentages for aggregate materials sieved through various mesh sizes, ranging from 540 mm to 0.15 mm.
2. Cumulative retained weights and percentages for fine aggregate sieved through various mesh sizes from 10 mm to 0.15 mm, with specified limits.
3. Cumulative retained weights and percentages for a combined coarse and fine aggregate sample sieved through various mesh sizes from 40 mm to 2.36 mm, with specified limits.
TabelBaja1.pdf
This document provides standard dimensions, sectional properties, and characteristics of H-steel sections. It includes dimensions such as depth, width, thickness, radius, and area. Sectional properties included are sectional area, unit weight, moment of inertia, radius of gyration, and compactness criteria. Characteristics such as yield strength are also provided, varying based on thickness of the steel. Over 50 H-steel section dimensions are defined.
Tabel baja standard
This document provides specifications for wide flange steel shapes, including:
1) Dimensional specifications and properties like cross-sectional area, moments of inertia, radii of gyration, and modulus of section for various steel sizes.
2) Tolerances for dimensions of widths, depths, thicknesses.
3) Chemical composition and mechanical properties for different grades of steel.
4) Table of weights in kg/m and kg/12m for common hot rolled beam, wide flange, and H-beam sizes.
Millenium Transformer Range1
The document contains specifications for various types of transformers produced by Millenium Transformers. It includes tables listing technical specifications such as measurements, weights, power ratings, and dimensions for their single phase isolation transformers, three phase isolation transformers, and toroidal transformers in various voltage/amperage configurations. Contact information is provided at the end for inquiries.
2 parte de la pregunta 2
This document contains information about maximum annual precipitation in 24 hours for various return periods (2, 3, 5, 10, 20 etc. years) using different distribution methods. It provides precipitation data, intensities for different durations (20 to 240 minutes), and rainfall calculations using the rational method for a 35 year return period with a 15 minute storm duration. The calculated discharge is 24.88 m3/s.
Wide flange-shape-jisg3192
The document provides specifications for wide flange shapes, including:
- Dimensional specifications and tolerances for various metric sizes
- Chemical composition and mechanical properties of steel grades
- Tables listing the section properties and weights of different wide flange sections
- The specifications are according to the JIS G3192 standard
Page no.358 359
The document provides information on the moment and shear capacities of different ISMB steel beams, including their weights, dimensions, and maximum permissible stresses. It lists the moment and shear capacities in ton-meters and tons for ISMB beams ranging from 100-600 sizes. It also includes a table showing the effective lengths of beams for different unsupported lengths in meters. A note explains that the listed moment capacities assume full permissible bending stress, but the actual values depend on the unsupported length and permissible stresses in bending compression, which are provided in a table based on the lateral unsupported length.
02 cuadros hidrologia
This document provides physical characteristics and parameters of the Mantaro River basin in Peru. It includes the basin area (31,747 km2), average altitude (2,518 m), longest river length (14.145 km), and average rainfall by month between 1963-2018 based on data from the Quillabamba weather station. It also lists indices such as drainage density, stream order, and average slopes. In summary, it analyzes key hydrological metrics of the Mantaro River basin through tables of geographic and climatic data.
Metrado cuatro niveles
The document contains details of the structural analysis of a building, including dimensions and material properties of columns, beams, and slabs for four levels. Columns include dimensions for height, width, and thickness. Beams include dimensions for length, thickness, and overhang. Slabs include panel lengths and widths. Material properties like concrete and masonry densities are also provided. Dimensional and calculation details are given for structural elements on each level.
Metrado cuatro niveles
The document contains details of the structural analysis of a building, including dimensions and calculations for columns, beams, and slabs over four levels. Columns include dimensions for height, width, and thickness. Beams are broken into segments with length, width, and thickness. Slabs are divided into panels with length and width. Material properties like concrete density are also included.
Data and results
The document contains data from calibration tests of an orifice meter and a venturi meter. Table 1 shows data from 10 trials of the orifice meter calibration including upstream and downstream manometer readings, volume measured, time, calculated volumetric flow rates, and coefficient of discharge. Table 2 shows similar data from 10 venturi meter calibration trials. Figure 1 plots the orifice meter's coefficient of discharge against Reynolds number while Figure 2 plots its pressure drop against volumetric flow rate. Figures 3 and 4 show the same relationships for the venturi meter.
SPECTRAL-BASED FATIGUE ASSESSMENT OF FSO
The document discusses fatigue analysis of an offshore floating storage vessel (FSO) hull construction using spectral-based fatigue analysis methods. It outlines the objectives to determine long-term wave load characteristics, stress distributions, and fatigue life of critical locations. The methodology involves regular wave load analysis, finite element modeling, spectral analysis of long-term wave loads and stresses, and fatigue analysis to estimate the fatigue life. Critical locations on the hull are identified for further stress analysis and fatigue life estimation.
caracteristicas_tecnicas_tdl_standard_descargas.pdf
This document contains specifications for various rejas series (grating models). It provides the model codes, dimensions, weights, and load ratings for different rejas configurations with varying distances between supports. The rejas can be customized based on the distance between supports, bar dimensions and spacing, and other parameters. Maximum load ratings and recommended applications are provided for each model depending on the distance between supports.
Portofolio jacket platform dynamic analysis
The document summarizes the dynamic analysis of the XYZ wellhead platform based on API RP2A WSD. It includes redesign details, main data used in the analysis such as soil properties, wave and earthquake information. It then covers the steps of the seismic, fatigue and load out analyses including determination of critical members. The maximum member and joint utilisation checks are reported. Load out analysis is also presented for the BOA BARGE 21/22 carrying containers. Final ballasting steps to achieve the desired draft are provided.
6.7 Scatterplots
This document contains 9 tables of data related to demographics, athletics, and climate over time. The tables include data on population aging in Manitoba, boiling points at different altitudes, swimming and speed skating record times, and winning times for the women's 1500m speed skating Olympic event.
Alia electromagnetic flowmeter_flange type_amf900 series_waste water
ALIAMAG AMF900 Series is a flange type Electromagnetic Flowmeter ideal for conductive liquids. It comes in sizes from 6 to 2000mm.
The AMF900 is widely used for tap-water, waste water, food & beverage Pulp & Paper and many other applications.
AMF900 Series magmeter could be used in compact or separate model with AMC Series converter of electromagnetic flowmeter
FEATURES
Various liner can be selected that satisfies most industrial applications.
Flow Velocity range:0-12 m/s, with good results for low flow applications
It comes any flanges such as ,ANSI, DIN, JIS ¡etc.
It excellent for high pressure application.
Protection class: IP68 is available,and the sensor can sink into the water.
FEP Liner suitable in vacuum tube.
High accuracy of +/-0.5% of reading(or+/-0.2% of reading)
With Forward/Reverse flowrate measure function.
SPECIFICATION
Pipe Size: 6 - 2000 mm(1/4'' - 80'')
Measureing Range:0 - 0.25 m/s min.
0-12 m/s max.
Explosion Proof: Exd(ib)ibqIIBT5 (with AMC3100 only)
Protection:
IP 68
IP 68 (Submersible)
Ambient Temperature: -25 to +60oC
Temperature:
-10 ~ +60 oC (Polyurethane,PU)
-20 ~ +70 oC (Neoprene)
-40 ~ +180 oC (FEP)
-40 ~ +180 oC (PTFE/PFA)
Jhon
This document provides information for a 26.5 hectare agricultural project located at an altitude of 2500 meters above sea level. It includes a list of crops to be grown along with their areas, and requests calculations of water demand (module of irrigation) and design flow for hydraulic structures based on the provided crop data and efficiencies. Calculations will involve determining crop coefficients over time and monthly evapotranspiration values to estimate irrigation requirements.
leaders_5y_presentation
This document summarizes the 5-year clinical outcomes from the LEADERS trial, which compared the Biolimus A9-eluting stent with a biodegradable polymer to the Sirolimus-eluting stent with a durable polymer. The main findings over 5 years of follow-up were:
1) The Biolimus stent was non-inferior to the Sirolimus stent for the primary endpoint of major adverse cardiac events (MACE), comprising cardiac death, heart attack (MI), or clinically-indicated target vessel revascularization (TVR).
2) There were no significant differences between the stents in rates of cardiac death, heart attack (MI), or stent thrombosis.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
More Related Content
Similar to 88247_Presentation1.pptx
Wide flange-shape-jisg3192
The document provides specifications for wide flange shapes, including:
- Dimensional specifications and tolerances for various metric sizes
- Chemical composition and mechanical properties of steel grades
- Tables listing the section properties and weights of different wide flange sections
- The specifications are according to the JIS G3192 standard
Page no.358 359
The document provides information on the moment and shear capacities of different ISMB steel beams, including their weights, dimensions, and maximum permissible stresses. It lists the moment and shear capacities in ton-meters and tons for ISMB beams ranging from 100-600 sizes. It also includes a table showing the effective lengths of beams for different unsupported lengths in meters. A note explains that the listed moment capacities assume full permissible bending stress, but the actual values depend on the unsupported length and permissible stresses in bending compression, which are provided in a table based on the lateral unsupported length.
02 cuadros hidrologia
This document provides physical characteristics and parameters of the Mantaro River basin in Peru. It includes the basin area (31,747 km2), average altitude (2,518 m), longest river length (14.145 km), and average rainfall by month between 1963-2018 based on data from the Quillabamba weather station. It also lists indices such as drainage density, stream order, and average slopes. In summary, it analyzes key hydrological metrics of the Mantaro River basin through tables of geographic and climatic data.
Metrado cuatro niveles
The document contains details of the structural analysis of a building, including dimensions and material properties of columns, beams, and slabs for four levels. Columns include dimensions for height, width, and thickness. Beams include dimensions for length, thickness, and overhang. Slabs include panel lengths and widths. Material properties like concrete and masonry densities are also provided. Dimensional and calculation details are given for structural elements on each level.
Metrado cuatro niveles
The document contains details of the structural analysis of a building, including dimensions and calculations for columns, beams, and slabs over four levels. Columns include dimensions for height, width, and thickness. Beams are broken into segments with length, width, and thickness. Slabs are divided into panels with length and width. Material properties like concrete density are also included.
Data and results
The document contains data from calibration tests of an orifice meter and a venturi meter. Table 1 shows data from 10 trials of the orifice meter calibration including upstream and downstream manometer readings, volume measured, time, calculated volumetric flow rates, and coefficient of discharge. Table 2 shows similar data from 10 venturi meter calibration trials. Figure 1 plots the orifice meter's coefficient of discharge against Reynolds number while Figure 2 plots its pressure drop against volumetric flow rate. Figures 3 and 4 show the same relationships for the venturi meter.
SPECTRAL-BASED FATIGUE ASSESSMENT OF FSO
The document discusses fatigue analysis of an offshore floating storage vessel (FSO) hull construction using spectral-based fatigue analysis methods. It outlines the objectives to determine long-term wave load characteristics, stress distributions, and fatigue life of critical locations. The methodology involves regular wave load analysis, finite element modeling, spectral analysis of long-term wave loads and stresses, and fatigue analysis to estimate the fatigue life. Critical locations on the hull are identified for further stress analysis and fatigue life estimation.
caracteristicas_tecnicas_tdl_standard_descargas.pdf
This document contains specifications for various rejas series (grating models). It provides the model codes, dimensions, weights, and load ratings for different rejas configurations with varying distances between supports. The rejas can be customized based on the distance between supports, bar dimensions and spacing, and other parameters. Maximum load ratings and recommended applications are provided for each model depending on the distance between supports.
Portofolio jacket platform dynamic analysis
The document summarizes the dynamic analysis of the XYZ wellhead platform based on API RP2A WSD. It includes redesign details, main data used in the analysis such as soil properties, wave and earthquake information. It then covers the steps of the seismic, fatigue and load out analyses including determination of critical members. The maximum member and joint utilisation checks are reported. Load out analysis is also presented for the BOA BARGE 21/22 carrying containers. Final ballasting steps to achieve the desired draft are provided.
6.7 Scatterplots
This document contains 9 tables of data related to demographics, athletics, and climate over time. The tables include data on population aging in Manitoba, boiling points at different altitudes, swimming and speed skating record times, and winning times for the women's 1500m speed skating Olympic event.
Alia electromagnetic flowmeter_flange type_amf900 series_waste water
ALIAMAG AMF900 Series is a flange type Electromagnetic Flowmeter ideal for conductive liquids. It comes in sizes from 6 to 2000mm.
The AMF900 is widely used for tap-water, waste water, food & beverage Pulp & Paper and many other applications.
AMF900 Series magmeter could be used in compact or separate model with AMC Series converter of electromagnetic flowmeter
FEATURES
Various liner can be selected that satisfies most industrial applications.
Flow Velocity range:0-12 m/s, with good results for low flow applications
It comes any flanges such as ,ANSI, DIN, JIS ¡etc.
It excellent for high pressure application.
Protection class: IP68 is available,and the sensor can sink into the water.
FEP Liner suitable in vacuum tube.
High accuracy of +/-0.5% of reading(or+/-0.2% of reading)
With Forward/Reverse flowrate measure function.
SPECIFICATION
Pipe Size: 6 - 2000 mm(1/4'' - 80'')
Measureing Range:0 - 0.25 m/s min.
0-12 m/s max.
Explosion Proof: Exd(ib)ibqIIBT5 (with AMC3100 only)
Protection:
IP 68
IP 68 (Submersible)
Ambient Temperature: -25 to +60oC
Temperature:
-10 ~ +60 oC (Polyurethane,PU)
-20 ~ +70 oC (Neoprene)
-40 ~ +180 oC (FEP)
-40 ~ +180 oC (PTFE/PFA)
Jhon
This document provides information for a 26.5 hectare agricultural project located at an altitude of 2500 meters above sea level. It includes a list of crops to be grown along with their areas, and requests calculations of water demand (module of irrigation) and design flow for hydraulic structures based on the provided crop data and efficiencies. Calculations will involve determining crop coefficients over time and monthly evapotranspiration values to estimate irrigation requirements.
leaders_5y_presentation
This document summarizes the 5-year clinical outcomes from the LEADERS trial, which compared the Biolimus A9-eluting stent with a biodegradable polymer to the Sirolimus-eluting stent with a durable polymer. The main findings over 5 years of follow-up were:
1) The Biolimus stent was non-inferior to the Sirolimus stent for the primary endpoint of major adverse cardiac events (MACE), comprising cardiac death, heart attack (MI), or clinically-indicated target vessel revascularization (TVR).
2) There were no significant differences between the stents in rates of cardiac death, heart attack (MI), or stent thrombosis.
Similar to 88247_Presentation1.pptx (13)
caracteristicas_tecnicas_tdl_standard_descargas.pdf
caracteristicas_tecnicas_tdl_standard_descargas.pdf
Alia electromagnetic flowmeter_flange type_amf900 series_waste water
Alia electromagnetic flowmeter_flange type_amf900 series_waste water
Recently uploaded
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Recently uploaded (20)
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
88247_Presentation1.pptx
- 1. Alif M. Basyir (1606904932) Henny Shinta M. (1606905046) Ichwanul Muslimin (16068895725) Talitha Arista Nia (1606827630) Theogracia D. Rupilu (1606950516) Tiansyah Marilio (1406604014)
- 2. Aperture, mm Mass % Cum. mass % retained Cum. mass % Passing Log Cum. mass % retained Log aperture 1200 1.5 1.5 98.5 0.18 3.08 600 4.0 5.5 94.5 1.74 2.78 300 10.0 15.5 84.5 1.19 2.48 150 22.0 37.5 62.5 1.57 2.18 75 33.0 70.5 29.5 1.85 1.87 -75 29.5 100 0 2 -
- 3. 1 10 100 1000 1 10 100 1000 10000 Cum. Mass % passing Particle Size (mikrom)
- 4. log aperture Cum. mass % retaired 1/R 100/R log 100/R log [log 100/R] 3,08 1,5 0,6 66,6 1,823 0,261 2,78 5,5 0,18 18,18 1,259 0,1 2,48 15,5 0,0645 6,45 0,809 -0,092 2,18 37,5 0,026 2,6 0,414 -0,383 1,87 70,5 0,0142 1,42 0,152 -0,818 - 100 0,01 1 0 -
- 5. 0.1 1 10 100 1 10 100 1000 10000 Cum. mass % retained Particle Size
- 6. • Log (200) = 2,3 tarik garis mengenai kurva, tegak lurus sb y Didapat titik (2.3 , -0.3) y = -0.3 log (log 100/R) = -0,3 R = 31,6% • Log (34) = 1,53 tarik garis mengenai kurva, tegak lurus sb y Tidak mengenai kurva berarti tidak ada massa yang tertahan -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 0 0.5 1 1.5 2 2.5 3 3.5 Axis Title Axis Title
- 7. Apertur e, Micro Meter Log Apert ure Mass retain ed Cum. mass % Retained (R) 1/R 100/R Log 100/R Log [Log 100/R] 2000 3,301 4,0 4,0 0,25 25 1,398 0,146 1200 3,079 9,5 13,5 0,074 7.4 0,869 -0,06 850 2,929 12,5 26 0,038 3.8 0,58 -0,237 600 2,778 15,5 41,5 0,024 2.4 0,38 -0,42 500 2,699 19,0 60,5 0,017 1.7 0,23 -0,638 350 2,544 16,0 76,5 0,013 1.3 0,114 -0,943 250 2,398 13,0 89,5 0,011 1.1 0,041 -1,387 -250 - 10,5 100 0,01 1 0 -
- 8. -1.6 -1.4 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 0 1 1 2 2 3 3 4 Log [Log 100/R] Log Size (microns)
- 9. Aperture, mm Mass % Cum. mass % retained Cum. mass % Passing Log Cum. mass % retained Log aperture 1200 5,0 5,0 95 0,699 3,08 600 1,0 6,0 89 0,778 2,78 300 15,0 21,0 79 1,322 2,48 150 20,0 41,0 59 1,613 2,18 75 30,0 71,0 29 1,851 1,87 -75 29,0 100 0 2 -
- 10. 0.699 0.778 1.322 1.613 1.851 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0 0.5 1 1.5 2 2.5 3 3.5 Log Cum % Retained Log Particle Size
- 11. 5 6 21 41 71 -10 0 10 20 30 40 50 60 70 80 1 10 100 1000 10000 Cum % Retained Particle Size (Micron) Dari plotting, cum % retained particle size 1000 micron = 5,5 %