Abstract—A novel approach to irrigation modeling is presented: the locale specific machine learning of soil moisture data. The merits of this new patent pending technique are clear when compared to existing methods, such as the AquaCrop program created by the Food and Agricultural Organization (FAO). From a case study on the comparative performance of AquaCrop and machine learning in the extrapolative modeling of soil moisture, AquaCrop performed with a mean squared error of 0.00165 whereas the machine learning received 0.00013, an order of magnitude lower. In addition, a novel algorithm, the ConserWater™ algorithm, has been created for the purpose of machine learning soil moisture with accuracy and efficiency. The performance of the algorithm is very superior when compared to other popular machine learning techniques, as applied to soil moisture. Finally, to allow this technology to reach agriculturalists at the grassroots level, the entire world has been machine learned and the resultant models have been encapsulated into a lightweight easy-to-use smartphone application.
Presentation on FAO's integrated climate change impact assessment tool called MOSAICC (Modelling System for Agricultural Impacts of Climate Change).
Info: MOSAICC@fao.org
Remote sensing (RS) and geographical information systems (GIS) are revolutionising irrigation management. They represent a relatively cheap and rapid method of acquiring up-to-date information over a large geographical area. and are the only practical way to obtain data from inaccessible regions. At small scales, regional phenomena which are invisible from the ground can be clearly visible. Presented at the 1st World Irrigation Forum, 2013, Mardin, Turkey.
Presentation on FAO's integrated climate change impact assessment tool called MOSAICC (Modelling System for Agricultural Impacts of Climate Change).
Info: MOSAICC@fao.org
Remote sensing (RS) and geographical information systems (GIS) are revolutionising irrigation management. They represent a relatively cheap and rapid method of acquiring up-to-date information over a large geographical area. and are the only practical way to obtain data from inaccessible regions. At small scales, regional phenomena which are invisible from the ground can be clearly visible. Presented at the 1st World Irrigation Forum, 2013, Mardin, Turkey.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
call for paper 2012, hard copy of journal, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
Remote sensing based water management from the watershed to the field levelCIMMYT
Remote sensing –Beyond images
Mexico 14-15 December 2013
The workshop was organized by CIMMYT Global Conservation Agriculture Program (GCAP) and funded by the Bill & Melinda Gates Foundation (BMGF), the Mexican Secretariat of Agriculture, Livestock, Rural Development, Fisheries and Food (SAGARPA), the International Maize and Wheat Improvement Center (CIMMYT), CGIAR Research Program on Maize, the Cereal System Initiative for South Asia (CSISA) and the Sustainable Modernization of the Traditional Agriculture (MasAgro)
Floods can be hugely destructive, but they also offer opportunities for farmers and fisherfolk. If their frequency and extent can be measured, then we will be better able to mitigate costs and maximise benefits. Digital geospatial flood inundation mapping is a powerful new approach for flood response that shows floodwater extent and depth on the land surface. IWMI research will evaluate this new technology and develop a prototype flood inundation map for South Asia. Also discussed is a project to flood map and model in a spate irrigation system in Sudan.
Crop modeling has been applied at various scales in agriculture, from precision farming, to farm planning, to watershed or regional policy development. Crop models are mechanistic process-based models in response to daily weather inputs, predict soil traits, daily photosynthesis, growth, and crop management.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Predictive fertilization models for potato crops using machine learning techn...IJECEIAES
Given the influence of several factors, including weather, soils, land management, genotypes, and the severity of pests and diseases, prescribing adequate nutrient levels is difficult. A potato’s performance can be predicted using machine learning techniques in cases when there is enough data. This study aimed to develop a highly precise model for determining the optimal levels of nitrogen, phosphorus, and potassium required to achieve both high-quality and high-yield potato crops, taking into account the impact of various environmental factors such as weather, soil type, and land management practices. We used 900 field experiments from Kaggle as part of a data set. We developed, evaluated, and compared prediction models of k-nearest neighbor (KNN), linear support vector machine (SVM), naive Bayes (NB) classifier, decision tree (DT) regressor, random forest (RF) regressor, and eXtreme gradient boosting (XGBoost). We used measures such as mean average error (MAE), mean squared error (MSE), R-Squared (RS), and R 2 Root mean squared error (RMSE) to describe the model’s mistakes and prediction capacity. It turned out that the XGBoost model has the greatest R 2 , MSE and MAE values. Overall, the XGBoost model outperforms the other machine learning models. In the end, we suggested a hardware implementation to help farmers in the field.
The water balanced of a place, whether it be an agricultural field, watershed, or continent, can be determined by calculating the input, output, and storage changes of water at the Earth's surface. The major input of water is from precipitation and output is evapotranspiration. The water balance is intended for use as a screening tool to further evaluates water resources allocations within the watershed and to identify water balance components that may require further analysis during the next levels of watersheds planning. The study area chosen for the present study area is Doddavalabhi sub watershed which falls in Kolar taluk of Kolar district. The study areas geographically lies between 760 8’ 0” E and 760 23’ 0” E longitude and 120 20’ 0” N and 120 28’ 0” N latitudes with an area 15.20 sq.km. For the determination of crop water requirement for Kolar major crops considered are ragi and groundnut with the crop period of 120 days and 140 days respectively. The year and monthly wise potential evapotranspiration and actual evapotranspiration is calculated by using penman method, blaney-criddle method, pan evaporation and radiation methods. The year wise potential evapotranspiration calculated by Blaney-criddle is maximum 645.66 mm during 2014, in this year monthly PET is maximum in July month ie 150.4mm. The year wise potential evapotranspiration calculated by Pan Evaporation is maximum 236.43 mm during 2014, in this year monthly PET is maximum in July month ie 56.67mm. The Year wise actual evapotranspiration is also maximum during 2014 for both ragi and groundnut. Hence Blaney criddle method is best suitable since it provides the most satisfactory results compared to other methods because this method is suggested for areas where available climatic data cover air temperature data only.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
call for paper 2012, hard copy of journal, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
Remote sensing based water management from the watershed to the field levelCIMMYT
Remote sensing –Beyond images
Mexico 14-15 December 2013
The workshop was organized by CIMMYT Global Conservation Agriculture Program (GCAP) and funded by the Bill & Melinda Gates Foundation (BMGF), the Mexican Secretariat of Agriculture, Livestock, Rural Development, Fisheries and Food (SAGARPA), the International Maize and Wheat Improvement Center (CIMMYT), CGIAR Research Program on Maize, the Cereal System Initiative for South Asia (CSISA) and the Sustainable Modernization of the Traditional Agriculture (MasAgro)
Floods can be hugely destructive, but they also offer opportunities for farmers and fisherfolk. If their frequency and extent can be measured, then we will be better able to mitigate costs and maximise benefits. Digital geospatial flood inundation mapping is a powerful new approach for flood response that shows floodwater extent and depth on the land surface. IWMI research will evaluate this new technology and develop a prototype flood inundation map for South Asia. Also discussed is a project to flood map and model in a spate irrigation system in Sudan.
Crop modeling has been applied at various scales in agriculture, from precision farming, to farm planning, to watershed or regional policy development. Crop models are mechanistic process-based models in response to daily weather inputs, predict soil traits, daily photosynthesis, growth, and crop management.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Predictive fertilization models for potato crops using machine learning techn...IJECEIAES
Given the influence of several factors, including weather, soils, land management, genotypes, and the severity of pests and diseases, prescribing adequate nutrient levels is difficult. A potato’s performance can be predicted using machine learning techniques in cases when there is enough data. This study aimed to develop a highly precise model for determining the optimal levels of nitrogen, phosphorus, and potassium required to achieve both high-quality and high-yield potato crops, taking into account the impact of various environmental factors such as weather, soil type, and land management practices. We used 900 field experiments from Kaggle as part of a data set. We developed, evaluated, and compared prediction models of k-nearest neighbor (KNN), linear support vector machine (SVM), naive Bayes (NB) classifier, decision tree (DT) regressor, random forest (RF) regressor, and eXtreme gradient boosting (XGBoost). We used measures such as mean average error (MAE), mean squared error (MSE), R-Squared (RS), and R 2 Root mean squared error (RMSE) to describe the model’s mistakes and prediction capacity. It turned out that the XGBoost model has the greatest R 2 , MSE and MAE values. Overall, the XGBoost model outperforms the other machine learning models. In the end, we suggested a hardware implementation to help farmers in the field.
The water balanced of a place, whether it be an agricultural field, watershed, or continent, can be determined by calculating the input, output, and storage changes of water at the Earth's surface. The major input of water is from precipitation and output is evapotranspiration. The water balance is intended for use as a screening tool to further evaluates water resources allocations within the watershed and to identify water balance components that may require further analysis during the next levels of watersheds planning. The study area chosen for the present study area is Doddavalabhi sub watershed which falls in Kolar taluk of Kolar district. The study areas geographically lies between 760 8’ 0” E and 760 23’ 0” E longitude and 120 20’ 0” N and 120 28’ 0” N latitudes with an area 15.20 sq.km. For the determination of crop water requirement for Kolar major crops considered are ragi and groundnut with the crop period of 120 days and 140 days respectively. The year and monthly wise potential evapotranspiration and actual evapotranspiration is calculated by using penman method, blaney-criddle method, pan evaporation and radiation methods. The year wise potential evapotranspiration calculated by Blaney-criddle is maximum 645.66 mm during 2014, in this year monthly PET is maximum in July month ie 150.4mm. The year wise potential evapotranspiration calculated by Pan Evaporation is maximum 236.43 mm during 2014, in this year monthly PET is maximum in July month ie 56.67mm. The Year wise actual evapotranspiration is also maximum during 2014 for both ragi and groundnut. Hence Blaney criddle method is best suitable since it provides the most satisfactory results compared to other methods because this method is suggested for areas where available climatic data cover air temperature data only.
The seasonal climate changes have direct effects on determination of crop water requirement, irrigation scheduling and the potential of solar energy generation to operate the pumping system for watering crops. This research paper studied the technical evaluation of solar pumping and pressurized drip irrigation systems to investigate the recommended water required for suggested tomatoes crop in area of (one hectare) at AL-Salman district using measured climatic data from AL-Salman Agro-meteorological weather station for a period (2013-2017). The maximum average monthly of solar radiation was 7.6 kWh/m2 at June in all the years of recording data, while the minimum average monthly value was 3.37kWh/m2 at December where the sun at lowest point across the sky. The annual average hours of peak sun that corresponds to the operation time of the pumping system at maximum water consumption was calculated at eight months from March to October with a value of 7.2 hours/day, while it was 5.2 hours/day during the other four months (January, February, November and December). The Solar pumping sizing based on H-Q performance curve of a maximum flow rate of 64.45 m3/h and pump capacity of 16.79 kW with compounds motor pump efficiency of 61.2%. The total water production was 230000 m³/per year which indicates compatible overall system design and adequate to irrigate more planting land with same or other crop types.
An efficient hydro-crop growth prediction system for nutrient analysis using ...IJECEIAES
The hydro nutrient management (HNM) for crop yield is effectively improved using proposed system. A hydro-crop growth prediction system (HCGPS) is designed using machine learning. The reconfigurable nutrients uptake crop yield prediction rate is enhanced. This proposed HCGPS is used to predict the crop yield by considering input parameters such as nutrient index (NI), electric conductivity limit (ECL), ion concentration factors (ICF) and dry weight of the crop and crop yield rate (CYR) to analyze the positive and negative correlation with crop growth. The proposed system is used to find correlation Index of input and output parameters to determine the prediction rate of crop yield. The proposed design improves smart prediction rate and efficiency of crop growth rate with optimal utilization of input variables. This proposed HCGPS is very helpful to achieve good quality yield with optimal utilization of input parameters.
Farmers comparative use assessment of wind and electric pump for irrigationeSAT Journals
Abstract
Keta District provides one of the best wind regimes in Ghana and farming is the main occupation of most people in the communities of the district, notably the anloga community.A small size wind pump (1.6m rotor diameter) is currently in operation in Anloga in the Keta District on pilot bases to verify its cost effectiveness compared with the hydro electric power technology. The high electricity tariff paid every month for power consumption deterred majority of the farmers using hydro electricity technology for pumping. A survey conducted revealed that out of about 50 farmers, only 29% engaged in the use of electric power for pumping whilst 69% are still practising the manual method. 2% of the farmers are practising wind energy technology on pilot bases. Farmers in these coastal communities may have engaged in the use of wind energy for water pumping but for its high initial cost.
Keywords: wind, irrigation, electric, rural, development
Simulation models of agricultural systems, when coupled with appropriate
data sources, have a great potential for bringing agricultural research and development into the age of information technology.
Advancement of a smart fibrous capillary irrigation management system with an...journalBEEI
This paper presents the development work for integrating an Internet of Things (IoT) with a fibrous capillary irrigation system based on the climatic demand estimated by the weather condition. The monitoring and control using an IoT system is critical for such application that is targeted for precision irrigation. The fibrous capillary irrigation system is managed by manipulating a water supply depth using the potential evapotranspiration (ETo). A soil mositure sensor was used to monitor the progress of the root water uptake and input the fuzzy logic system, to determine the water requirements for the crop medium. Experiment was conducted by using a Choy sum plant as the test crop grown in a greenhouse. The monitoring of the demand and management of the watering system was successful. The ETo data was able to approximate the crop water requirement in near real time.
System for the determination of the real evapotranspiration of a vegetated su...Toscana Open Research
The invention proposes an intelligent apparatus to be used in open fields or greenhouses for expert irrigation management, ensuring efficient use of the water resource.
A review on use of sea water & solar power for agricultural purpose in co...pradip patel
In Coastal area plants do not grow properly because of the seawater. So to overcome these difficulties, the use of this technique can provide a proper plant growth. The seawater combines a solar desalination system with an environment for cultivating crops in which transpiration is minimized. To provide fresh water we use sunlight, seawater and cooled humid air to supply more sustainable environment condition for cultivation of crops in arid coastal region. This project tries to describe simulation the seawater considering condition of the arid region in district like Kutch (Gujarat) and in many countries like Iran, Oman. With desalination of seawater, it aims to provide sustainable local production of food by combining a growing environment in which water usage is minimized by solar energy. The technique is adapted for farms in arid coastal region that are suffering from salt infected soils and shortages of potable ground water. This technique may produce around 90-95% of total fresh water
Evaluation of Irrigation Application Efficiency: Case Study of Chanchaga Irri...AZOJETE UNIMAID
Water is an integral issue needed to attain the desired targets but good quality water for irrigation purpose is gradually become scarce. The seasonal nature of rainfall can give rise to water stress at critical periods of growth. This research attempts to evaluate the irrigation application efficiency of Chanchaga irrigation scheme, Minna, Niger state. A hand auger was used to bore to a desired depth to remove samples of the moist soil. Samples of the moist soil removed was placed in a can, covered and taken to the laboratory. The specific gravity (apparent) of the soil particle and the depth of water applied were determined using volumetric method, water application efficiency is determined using Gravimetric Method of Soil Moisture Content (Pw) Determination. The moisture content of the field after irrigation water is applied falls between the ranges of 51.1% and 51.5%, with an average of 51.28%, in this case the average amount of water applied is about 4.68%, this shows a little increase in the moisture content of the soil in the field. It was concluded that the efficiency of water application obtained is adequate and a good result considering the available management practice in terms of system operation, monitoring and evaluation.
Condition Studied Moisture of Ground Agryculture Production in Azerbaijan to ...CrimsonpublishersMedical
Condition Studied Moisture of Ground Agryculture Production in Azerbaijan to Achieve Ecological Clean Products by Aliev ZH in International Journal of Medical Sciences
WRI’s brand new “Food Service Playbook for Promoting Sustainable Food Choices” gives food service operators the very latest strategies for creating dining environments that empower consumers to choose sustainable, plant-rich dishes. This research builds off our first guide for food service, now with industry experience and insights from nearly 350 academic trials.
Artificial Reefs by Kuddle Life Foundation - May 2024punit537210
Situated in Pondicherry, India, Kuddle Life Foundation is a charitable, non-profit and non-governmental organization (NGO) dedicated to improving the living standards of coastal communities and simultaneously placing a strong emphasis on the protection of marine ecosystems.
One of the key areas we work in is Artificial Reefs. This presentation captures our journey so far and our learnings. We hope you get as excited about marine conservation and artificial reefs as we are.
Please visit our website: https://kuddlelife.org
Our Instagram channel:
@kuddlelifefoundation
Our Linkedin Page:
https://www.linkedin.com/company/kuddlelifefoundation/
and write to us if you have any questions:
info@kuddlelife.org
"Understanding the Carbon Cycle: Processes, Human Impacts, and Strategies for...MMariSelvam4
The carbon cycle is a critical component of Earth's environmental system, governing the movement and transformation of carbon through various reservoirs, including the atmosphere, oceans, soil, and living organisms. This complex cycle involves several key processes such as photosynthesis, respiration, decomposition, and carbon sequestration, each contributing to the regulation of carbon levels on the planet.
Human activities, particularly fossil fuel combustion and deforestation, have significantly altered the natural carbon cycle, leading to increased atmospheric carbon dioxide concentrations and driving climate change. Understanding the intricacies of the carbon cycle is essential for assessing the impacts of these changes and developing effective mitigation strategies.
By studying the carbon cycle, scientists can identify carbon sources and sinks, measure carbon fluxes, and predict future trends. This knowledge is crucial for crafting policies aimed at reducing carbon emissions, enhancing carbon storage, and promoting sustainable practices. The carbon cycle's interplay with climate systems, ecosystems, and human activities underscores its importance in maintaining a stable and healthy planet.
In-depth exploration of the carbon cycle reveals the delicate balance required to sustain life and the urgent need to address anthropogenic influences. Through research, education, and policy, we can work towards restoring equilibrium in the carbon cycle and ensuring a sustainable future for generations to come.
UNDERSTANDING WHAT GREEN WASHING IS!.pdfJulietMogola
Many companies today use green washing to lure the public into thinking they are conserving the environment but in real sense they are doing more harm. There have been such several cases from very big companies here in Kenya and also globally. This ranges from various sectors from manufacturing and goes to consumer products. Educating people on greenwashing will enable people to make better choices based on their analysis and not on what they see on marketing sites.
Natural farming @ Dr. Siddhartha S. Jena.pptxsidjena70
A brief about organic farming/ Natural farming/ Zero budget natural farming/ Subash Palekar Natural farming which keeps us and environment safe and healthy. Next gen Agricultural practices of chemical free farming.
Characterization and the Kinetics of drying at the drying oven and with micro...Open Access Research Paper
The objective of this work is to contribute to valorization de Nephelium lappaceum by the characterization of kinetics of drying of seeds of Nephelium lappaceum. The seeds were dehydrated until a constant mass respectively in a drying oven and a microwawe oven. The temperatures and the powers of drying are respectively: 50, 60 and 70°C and 140, 280 and 420 W. The results show that the curves of drying of seeds of Nephelium lappaceum do not present a phase of constant kinetics. The coefficients of diffusion vary between 2.09.10-8 to 2.98. 10-8m-2/s in the interval of 50°C at 70°C and between 4.83×10-07 at 9.04×10-07 m-8/s for the powers going of 140 W with 420 W the relation between Arrhenius and a value of energy of activation of 16.49 kJ. mol-1 expressed the effect of the temperature on effective diffusivity.
Global custom-tailored machine learning of soil water content for locale specific irrigation modeling with high accuracy
1. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 50
Global custom-tailored machine learning of soil water content for
locale specific irrigation modeling with high accuracy
Aadith Moorthy
MSC 697, California Institute of Technology, Pasadena, CA 91126, USA
Email: amoorthy@caltech.edu
Abstract—A novel approach to irrigation modeling is presented: the locale specific machine learning of soil moisture data.
The merits of this new patent pending technique are clear when compared to existing methods, such as the AquaCrop
program created by the Food and Agricultural Organization (FAO). From a case study on the comparative performance of
AquaCrop and machine learning in the extrapolative modeling of soil moisture, AquaCrop performed with a mean squared
error of 0.00165 whereas the machine learning received 0.00013, an order of magnitude lower. In addition, a novel
algorithm, the ConserWater™ algorithm, has been created for the purpose of machine learning soil moisture with accuracy
and efficiency. The performance of the algorithm is very superior when compared to other popular machine learning
techniques, as applied to soil moisture. Finally, to allow this technology to reach agriculturalists at the grassroots level, the
entire world has been machine learned and the resultant models have been encapsulated into a lightweight easy-to-use
smartphone application.
Keywords— ConserWater™, irrigation, machine learning, soil moisture.
I. INTRODUCTION
The Earth has 1.4 billion cubic kilometers of water, but at any given time only about 200,000 cubic kilometers is fresh water
that is accessible for human use [1]. In addition to the inherent paucity of total water supplies in relation to the escalating
human population, anthropogenic traumata have already taken a significant hold. This is especially true in agricultural
regions, as agriculture is the largest drain of fresh water [2].
A recent UN report has shown that small farms, preeminent in the developing world, provide the majority of food worldwide,
and employ 3 billion people [3]. In addition, most of the people living below the dollar-a-day poverty line are a part of this
group [3]. As they cannot afford sprinklers or drip irrigation for their fields, they resort to the age-old inefficient practice of
surface irrigation: they flood their fields with significant water and wait for it to drain into their fields. As a result, not
surprisingly, nearly 2/3 of global fresh water is used for irrigation [4]. It is by uplifting small farmers in developing countries
that we can achieve another agricultural revolution and ameliorate global water consumption while optimizing plant growth.
It is envisaged that with good management and knowledge of the optimum quantity of water needed for irrigation, the
efficiency of even the surface irrigation method can be driven up to as high as 90% [5]. To this end, several companies sell
field-wide soil moisture sensor arrays to provide real-time data on crops water needs [6]. This approach can be efficient and
it is claimed that it can facilitate a 25% decrease in water consumption during drought [6]. However, it can also be
prohibitively expensive, except for wealthy farmers. Each moisture sensor can cost about $100 dollars, so implanting an
array, along with operational services, can cost several thousand dollars [7]. This is clearly beyond the budgets of small
farmers.
As an alternative, more cost effective, approach, the irrigation science community has been researching the usage of
mathematical models for irrigation management for the past decades. One of the most notable of these models is AquaCrop,
a crop water model developed by the Land and Water Division of the Food and Agricultural Organization (FAO) [8]. For the
purpose of predicting irrigation water requirements, the central postulation used by AquaCrop is the soil water balance [9]:
(1)
2. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 51
where represents the root zone water depletion on day , the root zone water depletion on day , the
precipitation on day , runoff from the soil surface on day , net irrigation depth on day , capillary rise from the
groundwater on day , crop evapotranspiration on day and water loss of the root zone by deep percolation on day
.
From (1), it is clear that the inputs of water into the soil are rainfall, irrigation and capillary rise, whereas the outputs are deep
percolation, runoff and evapotranspiration (ET). Of the output mechanisms, ET is the most important, as the others are only
significant when there is heavy rainfall or heavy irrigation [9]. One drawback of this equation is that it implicitly assumes a
purely vertical model of water movement, whereas there may be other factors that distort this simple model.
However, more importantly, it turns out that ET is exceedingly difficult to calculate with accuracy. For reference ET, which
simulates the evapotranspiration that occurs from a hypothetical .12m grass-like crop, under conditions of ample water, the
FAO recommends and endorses the FAO 56 Penman-Monteith Equation [9]. It is well known that this equation can produce
unreliable results when climate records are sparse or unavailable [10]. This is becoming less of an issue in the 21st
Century as
numerous Autonomous Weather Stations (AWS) are being placed around the world, even in developing countries, like
China, which has over 4000 weather stations, sufficient to cover its entire geographical realm [11]. But some crucial
parameters are not well tabulated for use in the equation: for example, solar radiation and wind speed at a height of 2 m
above the ground are required by the model, but these quantities are seldom measured and are usually estimated in a crass
manner [12, 13]. Additionally, ground heat flux is a parameter needed by the model that is similarly very difficult to
accurately measure [14].
A common issue with any general equation approach is the presence of confounding factors, and geographical variability,
which has been well documented in the literature [15]. It has recently been suggested that even the Penman-Monteith
equation is not immune to problems upon closer inspection [16]. There are alternative general equations, such as the
Hargreaves equation, but the problems remain, and detract from the usage of a general equation globally to predict reliable
ET [15].
Accordingly, there are several other methods for ET determination, such as lysimetry, pan evaporation and empirical-based
statistical modeling [9]. The usage of lysimeters to determine ET is the most direct method, but it is prohibitively expensive
to install and use, and is hence not widespread [9]. Pan evaporation is easy to implement but is not favored, because
environmental factors differ between pan evaporation and soil with crops growing [9]. It can only give a qualitative idea of
ET.
Statistical modeling has been a relatively new approach facilitated by the advent of computers that can vastly simplify the
modeling process. Since ET tends to be a nonlinear behavior in several variables, Artificial Neural Networks (ANNs) are
commonly used [17]. The details of how ANNs work, especially in an irrigation context, is well documented in the literature
[18]. The models produced by ANNs can be made to be very accurate in predictive power. However, the necessary drawback
is that they can become computationally intensive as more neurons are supplied to increase their modeling power. Despite
advances in computer technology, there is currently no way for ANNs with several hidden neurons to be efficiently deployed
and executed on personal computers and smartphones, as it is well known they require large amounts of parallel processing
on distributed computing systems for efficacy [17]. On the other hand, if a small number of neurons are used, the model is
bound to not be very accurate as ET is a nontrivial function of the input variables. Hence ANNs may not be useful for
extensive modeling of every locale worldwide, which is required to allow irrigation management technology to reach every
farmer.
A final roadblock to the statistical modeling of ET is where the training data comes from. There has to be a set of known ET
values and corresponding weather data to train the models. However, as discussed before, it is often not feasible to measure
ET directly. As a result, studies on training statistical models of ET usually utilize the Penman-Monteith equation to produce
the training values [18]. Therefore, any potential problems from the usage of the equation, possibly from inadequate weather
data, are carried over to the models. Indeed, some of these studies also state that these models are intended to be used in more
3. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 52
of a ‘gap-filling’ procedure to fix missing data, rather than be an efficient calculator of evapotranspiration at all times [17,
19].
In this paper, a radical new approach is taken to irrigation modeling, by completely eschewing the soil water balance as the
crux of the model. Without this balance at the center, there is no need to focus most efforts on acquiring ET, which, as
described so far, is very hard to calculate accurately. Instead, the new approach is to directly machine learn soil moisture
data. The methods of generating soil moisture values from remote sensing are well known, and can generate values to an
accuracy of 0.01 m3
/m3
, which is sufficient for most applications [20, 21]. Furthermore, remote sensing enables such
reasonably accurate values of soil moisture to be determined for any place on earth. Therefore, there is no need for one
general model to describe everything: separate models can be generated for each location, so local variables are controlled by
the models themselves.
The machine learning of soil moisture is a very difficult task, as it is affected by all the variables in the soil water balance
from (1). In addition, there may be hidden variables not accounted for or well described by (1) that could potentially affect
soil moisture. It is shown in this paper that several standard and advanced machine learning techniques, such as multiple
linear regression and ensemble learning do not fair well in describing the data. The data is technically a time series, but
dedicated time series techniques, such as the popular AutoRegressive Integrated Moving Average (ARIMA) and Seasonal
ARIMA (SARIMA) also do not work because the stationarity assumption is not satisfied. This assumption requires that the
dataset have statistical properties, such as mean and standard deviation, that remain constant over time [22]. In SARIMA,
seasonal variation is allowed, as long as it predictably repeats itself in the same manner [22]. However, this is not the case for
any data that is controlled by precise climatic factors, as is any calculation of irrigational interest. There is also no way to
accurately discount these climatic factors to create processed data that is stationary. Some prior irrigation modeling related
work has tried to consider all non-seasonal variation to be random, but this may be an inadequate approach [23]. Climatic
variation is not purely random, as it is affected by several localized variables in a given region. This is especially important
for daily simulations and in the modeling of peaks in data resulting from precipitation, as is done here. Therefore, such an
approach is bound to give inaccurate results when used in a real application.
To combat these difficulties in the machine learning of soil moisture, a novel algorithm, the ConserWater™ algorithm, has
been developed. This algorithm not only shows high accuracy in modeling, but also good computational efficiency, to ensure
the models are learned in an expedient manner. In this paper, the ConserWater algorithm is compared to several popular
machine learning techniques, and also the FAO endorsed AquaCrop application, to attest to its efficacy.
In fact, the algorithm is so efficient without compromises in accuracy that it can be used to develop separate models for every
location on earth. The widespread geospatial machine learning has already been carried out, and thousands of models have
successfully been generated for several regions of the world. All of these models have been encapsulated in a lightweight
easy-to-use smartphone application, to enable this technology to reach farmers and agricultural engineers at the grassroots
level [24]. The particular details of the data mining, geospatial machine learning, and smartphone application are also
described.
II. MATERIAL AND METHOD
2.1 Geospatial Machine Learning and Data Mining
Using the Global Surface Summary of the Day (GSOD) dataset produced by the National Oceanic and Atmospheric
Administration (NOAA) of the US, the locations of over 30,000 reliable weather stations worldwide were received [11]. Soil
moisture data was acquired from the National Snow and Ice Data Center (NSIDC) [23]. Surface soil moisture was data
mined for each of the vicinities of the 30,000 stations, from datasets available from NSIDC, in three-hour increments, for the
course of over a year from 3/31/15 to 4/21/16. Hence, a time series collection of soil moisture data was created for each
station.
4. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 53
The data were then shifted and adjusted to account for time zonal differences. Next, the three-hourly data were averaged to
obtain daily data, to remove intraday variation resulting from hourly changes in temperature and sunlight.
The daily data, which consisted of approximately 400 data points for each station, was later machine learned using the
ConserWater™ algorithm. The physical machine learning was performed using Scikit-learn, a well known set of python tools
for machine learning and statistics. 10% of points from the almost 400 data points for each station was randomly selected for
cross validation testing (10-fold cross validation) and was not used as part of the training set. The inputs to the machine
learning consisted of location specific weather data collected from the stations themselves. Some examples of the input
variables used include temperature, pressure, and rainfall. This data was acquired using the World Weather Online service.
Using the cross validation set of 10% of the data points, mean squared errors (MSE) were calculated as follows:
(2)
where represents the number of data points, is the real data value and is the predicted value. The MSE quantifies how
well the model fits the data, and is commonly used in the machine learning literature.
In general, it was ensured that the MSE in soil moisture for each model remained below 10-4
, to ensure the quality of the
models. If any were found to not reach this threshold, those models were retrained until they converged below this level. In
particular, 10-4
was chosen because it was close to the random error in the soil moisture data. Any features greater than 10-2
are likely to be real features of the soil moisture, so the MSE tolerance was set to (10-2
)2
= 10-4
.
Accounting for various crop factors and rooting depths during all stages of crop growth, which have been well documented,
the water needs of these plants can be accurately predicted, in order to ensure optimal growth with just enough water [25].
The 30,000 models for the various different weather stations and their vicinities were encoded into a light-weight and easy to
use android application, ConserWater™, for facile viewing [24].
2.2 Comparison of various Machine Learning algorithms
In order to test and compare the efficacy ConserWater™ algorithm and process, as is presented in this paper, several
additional well known algorithms and methods were also tried: Least Squares Multiple Linear Regression (LSMLR),
Sequential Feature Selection (SFS), LASSO Regression, Ridge Regression, Elastic Net Regression, Ensemble Learning and
Neural Networks. They were all learned with the same input data. MATLAB was used to produce these comparative models.
LSMLR was the simplest algorithm tried and involves the minimization of residual squares, to find optimal coefficients:
(3)
where are the fitted coefficients and represent the regressors of . is the total number of data points.
The SFS algorithm is similar to LSMLR, except that an additional underlying procedure removes input variables that do not
affect the output with statistical significance, effectively reducing the computational complexity of the machine learning
while keeping the quality of the models fairly similar. For this study, an F-test was used to determine significance.
LASSO is an abbreviation for “least absolute shrinkage and selection operator”. It is an algorithm that also does variable
selection, similar to SFS. But it additionally invokes regularization. Regularization is a statistical technique that specifies
additional information to avoid overfitting of data. Mathematically, LASSO is described as follows:
(4)
where is a parameter that quantifies the regularization employed in the model, and represents the transpose of .
Ridge Regression is similar to LASSO, as it also employs regularization to combat overfitting. However, it does not allow
any coefficients to be set to zero, whereas the LASSO can. Ridge Regression is mathematically described:
5. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 54
(5)
The crucial difference between the LASSO and Ridge Regression develops from the difference in the inequality.
The elastic net, developed in 2005, is a hybrid algorithm encompassing both Ridge Regression and the LASSO. It has a built-
in parameter, , which quantifies the extent to which the algorithm resembles the LASSO or Ridge Regression. For example,
if , the algorithm resembles the LASSO, and for , Ridge Regression. In this study was set.
Ensemble learning, one of the most promising techniques, is an umbrella term for techniques that use an array of learners,
which are combined to give the final result. The advantage of this procedure is that the likelihood of a poorly trained model is
reduced when several learners are combined. The most commonly used ensemble techniques are bagging and boosting.
Bagging is an acronym for ‘bootstrap aggregating’, and it involves a statistical technique called bootstrapping to obtain
several randomly generated datasets from the originally supplied input regressor dataset. Then, separate models are made for
each of these new datasets. Each of these models is called a ‘learner’ and their results are combined with equal weighting to
give a prediction. In this study, 100 learners were used.
Boosting is very similar to bagging, except in the creation of new datasets from the original input regressor data. The new
datasets are strategically created such that up to half of the data is well described by the previously developed learners, and
the rest is not. Therefore, this method allows the model to drastically improve as the number of learners increases. Similar to
the bagging, 100 learners were also used for the boosting in this study.
The machine learning procedure that has probably received the most media and scholarly attention is that of neural networks.
They are commonly described as modeled after the human central nervous system. Several publications have detailed how
neural networks work and how they have been used to model quantities of irrigational interest [17, 18]. In particular, a
general regression neural network with the Levenberg-Marquardt algorithm was chosen and the number of hidden neurons
was set to 30 to obtain a trained model that was temporally efficient. 80% of the input data was used for training, with 10%
validation and 10% testing. These are also similar to those employed for calculations of irrigational interest in prior work
[17].
As mentioned before, machine learning techniques that are often used with time series data, such as the autoregressive
integrated moving average (ARIMA), were not used because the data did not satisfy their assumptive requirements.
All of the aforementioned techniques are presented for data from Coimbatore, Tamil Nadu, India. The models were
generated, trained and tested using soil moisture data from 3/31/15 to 4/21/16, which was acquired as mentioned before.
2.3 Comparison with Aquacrop
For a comparison of the ConserWater™ algorithm with existing technologies for irrigation management, case studies were
also conducted with AquaCrop, the program created by the FAO. In this paper, a particular case study of Amaravathi,
Maharashtra, India is presented. Identical weather data was inputted to both the ConserWater™ algorithm and AquaCrop.
For the trends in ET needed by AquaCrop over the course of the study period, the Penman-Monteith Equation was used:
(6)
The variables shown in (6) are as defined in [26]. For the sake of simplicity, it was assumed that there were no crops
substantially different from the hypothetical reference, which was justified by satellite imagery of the area, and the area was
also not known to be under climatic stress, so the reference ET was the real ET. Also, the soil type at Amaravathi was
determined from the NSIDC datasets to be silt clay loam. Finally, again for simplicity, no irrigation procedure was entered,
so that the predicted results could be compared to real data from the NSIDC dataset. Using an initial value that was itself
from the dataset, the AquaCrop model was propagated forward and the trend in surface soil moisture from the model was
recorded. The ConserWater™ model was also propagated using the same initial values and data. Finally, to provide a holistic
6. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 55
view of ConserWater™ in relation to AquaCrop, the MSE found for 10 more locations are also presented, following the
same methods.
III. RESULTS AND DISCUSSION
3.1 Comparison of various Machine Learning algorithms
The predictions of the various developed machine learning models for Coimbatore are presented in Fig.1, with regressors
supplied to the models just as they were trained (no future extrapolative behavior). Only a small segment of the almost 400
days is shown in order to emphasize how well the data is being described by each of the models.
FIG.1. PREDICTIONS OF VARIOUS SOIL MOISTURE MACHINE LEARNING MODELS: (A) MLR, (B) SFS, (C) THE
LASSO, (D) RIDGE REGRESSION, (E) ELASTIC NET, (F) BAGGED ENSEMBLE, (G) BOOSTED ENSEMBLE, (H)
NEURAL NETWORK AND (I) CONSERWATER™. THE SOLID LINE IS THE REAL DATA, WHILE THE DOTTED
LINE CONSISTS OF THE PREDICTED VALUES.
On a perfunctory glance, it appears as though all the models do a satisfactory job. Most of the fits look similar, especially the
LSMLR, SFS, LASSO, Ridge and elastic net. The ensemble learning methods give a marginally worse prediction, as does
the neural network. The ConserWater™ model gives by far the best fit, but all the models seem to be adequate for any
purpose of soil moisture prediction, because their residuals are generally low and R2
values generally in the .95-.99 range.
The MSE for these models is shown in Fig.2, which quantitatively confirms how each of these models describes the data.
FIG.2. MEAN SQUARED ERRORS (MSE) FOR THE VARIOUS MACHINE LEARNING MODELS AND DATA, AS
SEEN IN FIG.1.
It may seem initially that the ConserWater™ model is “overfitting” the data. Overfitting is the common machine learning
error where the model seems to unnaturally fit the data, to the point of capturing variations due to noise. With this reasoning,
0.00E+00
1.00E-04
2.00E-04
3.00E-04
4.00E-04
MSE
7. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 56
one may believe that the other models are better, as they do not capture the noise. However, this reasoning is unfounded for
two major reasons: (1) the ConserWater™ model is not overfitting and (2) the others models have a common issue.
In the case of soil moisture data, there is an inherent daily change caused by a variety of mechanisms such as evaporation and
rainfall. From this view, the ConserWater™ model effectively follows such trends with precision. Whereas other models
show upward trends in soil moisture even when there is no water input into the soil, the ConserWater™ model avoids this
behavior. Furthermore, the percent error in the soil moisture data for Coimbatore, as quoted in the dataset, is just 10%, so
most features in the real data are features from the moisture, and not instrumental error. In fact, an observation of the three
hour dataset, before it was averaged, reveals the daily fluctuations in soil moisture and rate of change. These fluctuations are
~0.01 m3
/m3
, so they suggest that signal noise must be smaller than 0.01 m3
/m3
, because they would otherwise be invisible.
Similarly, the egregious issue in the other models is that they do not accurately describe peaks. Peaks can be caused by
rainfall, as in this data, or even by irrigation, which is of practical relevance for this study. Models are of no use if they
cannot describe when the soil moisture will reach field capacity during irrigation, to avoid wasteful consumption of water.
Upon close inspection, in Fig.1, it can be seen that the predicted peak values of soil moisture in all models other than the
ConserWater™ model tend to occur a day after the real peak. This indicates the models have not actually learned how rain
peaks work, but are just returning the previous value that was given to them in the input. This may be the reason why there is
no prior literature on machine learning soil moisture itself: there are complexities surrounding the peaks. This issue is
summarized in Fig.3, where the regressors provided to the models were altered to use extrapolation to calculate soil moisture
in a self-iterative fashion. This is how these models would be used in the real world for predictions days after irrigation.
FIG.3. EXTRAPOLATED PREDICTIONS OF VARIOUS MACHINE LEARNING MODELS, WHEN ONLY PROVIDED
AN INITIAL SOIL MOISTURE VALUE: (A) MLR, (B) SFS, (C) THE LASSO, (D) RIDGE REGRESSION, (E)
ELASTIC NET, (F) BAGGED ENSEMBLE, (G) BOOSTED ENSEMBLE, (H) NEURAL NETWORK AND (I)
CONSERWATER™. THE SOLID LINE IS THE REAL DATA, WHILE THE DOTTED LINE CONSISTS OF THE
PREDICTED VALUES.
Fig.3 reveals the fallacy in utilizing well known methods for machine learning moisture. Models that seemed to fit the data
well now no longer do so, and several diverge. Now the LSMLR, SFS, LASSO, Ridge and elastic net all seem to err on too
low or too high values and have lost the day 16 rain peak. The bagged learning model produces a random scatter. The
boosted learning, mentioned earlier to be one of the promising algorithms, has mixed success. It understates the rain peak on
day 16 while overstating the small rain “bulge” from day 6. The neural network model seems to closely follow all parts of the
data except for the rain peak. Finally, ConserWater™ performs best. It fits the data less than in Fig.1, but is of much higher
value as it follows all the trends, plus the rain peak. Therefore, the ConserWater™ algorithm is a suitable algorithm for
accurate prediction of moisture. These observations can be quantitatively seen in Fig.4, which shows model MSEs.
8. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 57
FIG.4. MEAN SQUARED ERRORS (MSE) FOR THE VARIOUS MACHINE LEARNING MODELS AND DATA, AS
SEEN IN FIG.3.
3.2 Comparison with AquaCrop
FIG.5. EXTRAPOLATION OF CONSERWATER™ MODEL AND OUTPUT OF AQUACROP FOR SURFACE SOIL
MOISTURE, COMPARED TO REAL DATA.
AquaCrop uses a basic water balance, where rainfall and ET are primary factors. The rainfall at Amravati on Day 15 in Fig.3
was just 2 mm, but was sufficient to produce a rain peak. Clearly ET values around 15 mm/day exceed 2 mm, and the water
balance yielded incorrectly that soil moisture would drop. Note that even if the ET were incorrectly calculated due to
erroneous weather data, there is still no approach for the AquaCrop model to get close to the same rain peak as the real data,
since 2 mm added to the soil moisture cannot result in a ~.1 increase in soil moisture for any reasonable depth of soil. This
only reveals the robustness of the ConserWater algorithm with erroneous data, as compared to AquaCrop. Therefore, Fig.3
clearly reveals the inadequacies of AquaCrop: not only are ET based on general equations unreliable, but the water balance is
also not sufficiently accurate to predict how the soil moisture rises with just a little rain, especially with potential inaccurate
data. Hence AquaCrop is lacking for location-specific global application, further supported by results for more locations:
FIG.6. MSE OF AQUACROP AND CONSERWATER™ FOR VARIOUS LOCATIONS.
In context, the MSE values from Fig.6 point out that soil moisture values from AquaCrop are typically within
of the right value, whereas ConserWater has an error margin around . This may not seem
large now, but this difference can equate to tens of thousands of gallons of irrigation water for just a single acre.
0.00E+00
2.00E-04
4.00E-04
6.00E-04
MSE
0
0.001
0.002
0.003
0.004
MSE
AquaCrop ConserWater™
9. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 58
3.3 The Smartphone Application
FIG.7. SCREENSHOT FROM THE CONSERWATER™ APPLICATION, DISPLAYING THE REQUIRED IRRIGATION
FOR PASADENA ON A GIVEN DAY.
In order to make this technology accessible to farmers and agricultural engineers, it has been developed into an Android/iOS
application. With user inputs similar to AquaCrop, but more user-friendly, this application gets the user’s location from the
location services of a smartphone. Using the location, the application selects the most representative station model. Some
factors taken into account in selecting the model to be used are proximity, climate compatibility and soil similarity.
Additionally, the user is allowed to select the initial value for the soil moisture in the prediction. The user may enter the last
date he or she irrigated the field extensively, so the water content is assumed to be at the field capacity on that date, and the
model is subsequently evolved. Otherwise if the user has not watered his or her field recently, the soil moisture initial value
is taken to be the most recent value for the location from the NSIDC datasets. Finally, the selected model is propagated
forward in time using the initial values and recent historical weather data to predict the current levels of soil moisture. The
current levels can then be used with crop factors to determine water requirements. If utilized, this water quantity will bring
the soil moisture back to an optimum. A screenshot from a prediction of the application is displayed in Fig.7.
An important aspect is that it is lightweight – even phones with low specifications can run it. Furthermore, the models are
computationally efficient, during training and prediction, enabling the machine learning of the world, and quick responses to
usage. A recent trial of this application with Indian and Ghanaian farmers has also resulted in positive appraisals.
IV. CONCLUSION
A monumental algorithm capable of efficiently machine learning soil moisture data to high accuracy has been presented.
Compared to several popular existing techniques, it clearly has the upper hand in terms of accuracy. Additionally, it can
provide a much more precise model of localized effects than programs such as AquaCrop, that rely on a simple water balance
and evapotranspiration calculation as intermediate steps. This level of preciseness can translate to savings of tens of
thousands of gallons of water for just an acre of land. Finally, this technology has been encapsulated into an easy-to-use
lightweight smartphone application. These are necessities for the widespread proliferation of irrigation management
technology around the world, especially to small farmers who cannot afford soil moisture sensors or other irrigation
management technology. More information on using this technology, including download links, can be found on
www.conserwater.com.
REFERENCES
[1] Boberg J (2006) One world, One well: How Populations Can Grow on a Finite Water Supply. In: Rand Corporation.
http://www.rand.org/pubs/periodicals/rand-review/issues/spring2006/water.html. Accessed 3 Aug 2016
[2] Postel SL, Daily GC, Ehrlich PR (1996) Human appropriation of renewable fresh water. Science 271:785–788.
[3] IFAD, UNEP (2013) Smallholders, food security, and the environment.
[4] Wolfe B, Berger B, Filiberto D, Newton M, Pimentel D, Karabinakis E, Clark S, Poon E, Abbett E, Nandagopal S (2004) Water
resources: Agricultural and environmental issues. BioScience 54:909–918. doi: 10.1641/0006-
3568(2004)054[0909WRAAEI]2.0.CO;2
[5] Henkel M (2015) 21st century homestead: Sustainable agriculture III: Agricultural practices. Lulu.com
[6] Lufkin B (2015) Soil sensors can cut farms’ water use by a quarter during drought. In: Gizmodo. Accessed 3 Aug 2016
10. International Journal of Environmental & Agriculture Research (IJOEAR) ISSN:[2454-1850] [Vol-2, Issue-10, October- 2016]
Page | 59
[7] Sanden B (2005) Making Sense of Soil Moisture Checking and Sensors. University of California, Bakersfield, CA, USA
[8] Steduto P, Hsiao T, Fereres E, Raes D (2012) Crop yield response to water. Food and Agriculture Organization of the UN, Rome,
Italy
[9] Allen R, Pereira L, Raes D, Smith M (1998) Crop evapotranspiration - Guidelines for computing crop water requirements - FAO
Irrigation and drainage paper 56. Food and Agriculture Organization of the United Nations, Rome, Italy
[10] Stöckle CO, Kjelgaard J, Bellocchi G (2004) Evaluation of estimated weather data for calculating Penman-Monteith reference crop
evapotranspiration. Irrigation Science 23:39–46. doi: 10.1007/s00271-004-0091-0
[11] NOAA (2016) Global surface summary of the day - GSOD. NOAA data catalog
[12] Llasat M.(1998)Data error effects on net radiation and evapotranspiration estimation. Agricultural and Forest Meteorology 91:209–
221.
[13] Jensen DT, Hargreaves GH, Temesgen B, Allen RG (1997) Computation of ETo under Nonideal conditions. Journal of Irrigation and
Drainage Engineering 123:394–400. doi: 10.1061/(asce)0733-9437(1997)123:5(394)
[14] Wang J, Bras R. (1999) Ground heat flux estimated from surface soil temperature. Journal of Hydrology 216:214–226.
[15] Temesgen B, Eching S, Davidoff B, Frame K (2005) Comparison of some reference Evapotranspiration equations for California.
Journal of Irrigation and Drainage Engineering 131:73–84. doi: 10.1061/(asce)0733-9437(2005)131:1(73)
[16] Schymanski SJ, Or D (2016) The failure of the Penman-Monteith equation in explaining leaf transpiration. EGU General Assembly
Conference Abstracts 18:12635.
[17] Martí P, Gasque M (2010) Reference evapotranspiration estimation without local climatic data. Irrigation Science 29:479–495.
[18] Kim S, Kim HS (2008) Neural networks and genetic algorithm approach for nonlinear evaporation and evapotranspiration modeling.
Journal of Hydrology 351:299–317. doi: 10.1016/j.jhydrol.2007.12.014
[19] Abudu S, Bawazir AS, King JP (2010) Infilling missing daily Evapotranspiration data using neural networks. Journal of Irrigation and
Drainage Engineering 136:317–325. doi: 10.1061/(asce)ir.1943-4774.0000197
[20] Nichols S (2011) Review and evaluation of remote sensing methods for soil-moisture estimation. Journal of Photonics for Energy
028001. doi: 10.1117/1.3534910
[21] Reichle, R., G. De Lannoy, R. D. Koster, W. T. Crow, and J. S. Kimball. 2016. SMAP L4 9 km EASE-Grid Surface and Root Zone
Soil Moisture Analysis Update, Version 2. Boulder, Colorado USA. NASA National Snow and Ice Data Center Distributed Archive
Center.
[22] Brillinger D (1975) Time series: Data analysis and theory. Holt, Rinehart & Winston
[23] Psilovikos A, Elhag M (2013) Forecasting of remotely sensed daily Evapotranspiration data over Nile Delta Region, Egypt. Water
Resources Management 27:4115–4130. doi: 10.1007/s11269-013-0368-2
[24] Moorthy A (2016) ConserWater. In: ConserWater. https://www.conserwater.com. Accessed 20 September 2016
[25] Guerra E, Ventura F (2016) Crop coefficients: A literature review. Journal of Irrigation and Drainage Engineering 142:06015006.
[26] Zotarelli L, Dukes M, Romero C, Migliaccio K, Morgan K (2015) Step by Step Calculation of the Penman-Monteith
Evapotranspiration (FAO-56 Method). University of Florida Institute of Food and Agricultural Sciences, Gainesville, Florida, USA