This document provides instructions for building a product using wood materials like 2x2 and 2x4 pieces of wood, MDF, card, and string. It lists the required materials and equipment like a hand drill, long screws, and hinges. The 7 step guide details how to mark and cut the wood, assemble the two sides and connect them with beams using screws with pilot holes, attach the MDF front and sides, cut holes for maneuverability, and finally paint the completed product.

1. GC4: THE PRODUCT

2. MATERIAL LIST
• 2x2 pieces of wood
• 2x4 pieces of wood
• 2 pieces of MDF
• Card
• String
Equipment list
• Hand drill
• Long screws
• Hinges

3. STEP BY STEP GUIDE
1. Gather all equipment
2. Mark on the wood the measurements
3. Cut the wood
4. Put the wood together with screws in two sections
(make both sides first then connect beams
between them) (make sure to make a pilot hole
before drilling in the screw)
5. If not already cut, cut the MDF to size and attach
to front and sides and top of counter
6. Cut out holes in both sides for manoeuvrability
7. Paint to spec