Gary Clark Riley is a Quality Inspector and Tool Maker with over 30 years of experience in quality control, inspection processes, calibration, and developing torque systems. He has worked in the automotive, aerospace and manufacturing industries ensuring products meet ISO and AS quality standards. Riley has strong communication, problem solving, and relationship building skills. He is proficient in various inspection equipment, measurement tools, torque systems, and design software.
Right of Way Inspection
Facility & Station Inspection
Coating & Cathodic Inspection
Utility & Civil Inspection
Environmental Inspection
Safety Inspection
Cours massifs ouverts en ligne - Environnements personnels d'apprentissage co...Denis Gillet
Présentation donnée dans le cadre du colloque "cours massifs ouverts en ligne adaptés aux besoins du 21ème siècle" dans le cadre des entretiens Jacques Cartier 2013, Lyon, France
Référence: D. Gillet, “Personal Learning Environments as Enablers for Connectivist MOOCs”, 12th International Conference on Information Technology Based Higher Education and Training, October 10-12, 2013, Antalya, Turkey
Right of Way Inspection
Facility & Station Inspection
Coating & Cathodic Inspection
Utility & Civil Inspection
Environmental Inspection
Safety Inspection
Cours massifs ouverts en ligne - Environnements personnels d'apprentissage co...Denis Gillet
Présentation donnée dans le cadre du colloque "cours massifs ouverts en ligne adaptés aux besoins du 21ème siècle" dans le cadre des entretiens Jacques Cartier 2013, Lyon, France
Référence: D. Gillet, “Personal Learning Environments as Enablers for Connectivist MOOCs”, 12th International Conference on Information Technology Based Higher Education and Training, October 10-12, 2013, Antalya, Turkey
Discussion of important requirements of successful rainwater harvesting systems. Includes examples of "lessons learned" from numerous interesting and innovative rainwater systems installed in Florida over 5 years.
Alle Radici della Transumanza - Week end in Abruzzo 11 - 12 Luglio 2015Portante Andrea
Programma di viaggio del week end a Campo Imperatore, Santo Stefano di Sessanio Rocca Calascio Castel del Monte 11 e 12 Luglio 2015, organizzato dal Touring Club.
Arte storia natura e cibo.
Prevista osservazione guidata del fantastico cielo stellato, libero da inquinamento luminoso, insieme all'astronomo Stefano Giovanardi
How to Raise Capital from Angel Investors and VCKim Lavine
The most important job any entrepreneur has is to raise capital and nobody's teaching anybody how to do it...until now. The truth is, the only way you can learn to raise capital is to do it, and I've done it twice. The story of how I did it turned my book into a critically-acclaimed bestseller. I'm bringing everything I learned from raising capital twice and recruiting world-class talent to work for my company, including a Master of the Universe who helped #Startup #Google #PayPal #Napster & 50 more to teach you how to do it too. www.kimlavine.com
Rapport du conseil d’administration du Fonds monétaire international (FMI) : conclusions dans le cadre de l’examen annuel de la France au titre de l’article IV des statuts du Fonds
Lundi 25 juillet 2011
1. Gary Clark Riley
4138 19 mile rd. Sterling Heights, Michigan 48314
586-222-1189
Email: gcriley66@gmail.com
Quality Inspector
Key areas of knowledge:
Quality Inspector ISO9100 – AS9102 – ISO9001 Quality Control - Calibration
Tool Maker - Machinist Engage – Gage Trak - Proquis Met Lab
MS Word, Excel Cooper, GSE -Torque Systems GD&T - Discus
Career Summary
History & passion towards working with others to accomplish company goals.
Experienced in developing torque systems to run production and assembly operations.
Excellent communication and interpersonal skills with demonstrated ability at building
strong relationships with others in the industry.
Effective at trouble shooting and problem solving.
Experienced in Quality Control, electric, air and hand torque systems, tool making.
AITS – Advanced Integrated Tooling Solutions (June 2015- March 2016)
29700 Commerce dr. Chesterfield, Michigan 48051
Tool Maker – Aerospace tool fixtures
Build to design and prints
Various machinery, air tools, and bench hand experience.
Chardam Gear Co. (December 2013- May 2015)
40805 Mound rd. Sterling Heights, Michigan 48314
Quality Inspector – Metrology Lab
Ensured effective and efficient incoming and final inspection processes
Certification of all processes in compliance to ISO 9100 & AS9102
Calibration of all tooling, company and personal tools.
Maintain Etch room chemicals, Clam wash, daily tests performed
Discus software for 1st article inspections
2. Manes Machine & Engineering (March 2010- 2013)
Quality inspector, 2421 International Blvd. Fort Collins, Colorado
Ensured effective and efficient incoming and final inspection processes.
1st Article inspections.
Certification of all processes in compliance to ISO 9100 & AS9102
Calibration of all tooling, company and personal tools.
Cmm Inspector for all part processes.
Hand tools, Micrometers, Bore micrometers, calipers, height gage, indicators.
Nonconforming Product Disposition and Monitoring.
Chrysler (LLC) (May 1996 to June 2008)
Tool maker, Conner Ave. Assembly plant. Detroit, Michigan
Dodge Viper - Production Cmm Inspector. Built and maintained in house and contracted
fixtures for vehicle build. Quality of frames and parts for both vehicles were maintained
through Cmm inspection. 3 stages required for vehicle build: A) The frame itself after Net
Form & Pierce operation B) Hot running chassis – Measure -, rear clip install, front fascia
install. F.O.D. install for windshield and door opening operation C) Final build – inspection
of all panels, flush and gap. Ran Studies and trouble- shooting through engineering requests.
Cmm used, series 90 LK double column, with LK-Dmis-Version 5.6 software. Maintained
Cmm through monthly inspection and yearly calibration.
Torque Operations & Tooling. Set up & maintained all torque tooling through engineering
specs. Inlb, Ftlb and Newt meter torque sets for electric hand and multiple spindles - class A
Gse and Cooper tools. Used both software programs to set torque target, downshift speed,
threshold, self tap if necessary. Torques were monitored and recorded with PFS system for
engine and vehicle assemblies. Air and Impulse tools also set up and maintained along with
hand torque tools. All torque tooling is maintained on 10 week and yearly routes maintained
and recorded through Engage software.
Calibration Lab. ISO 9000 Certified. All plant calibrations performed in & out of plant,
maintained time schedule. Weekly calibrations performed on torque transducers, audit
equipment Push Pedal brake tester. Fluid fills. All calibrations are maintained in Engage
software and certificates from calibration companies. 90 day audits are performed to ensure
Cal Lab is functioning properly to maintain ISO 9000 certification.
Miscellaneous Responsibilities. On call while production is running for fixture or torque
break downs to repair or replace tools, to maintain production schedules. Work with
management and Logistics to process tool repairs and calibrated tools to come in and out of
plant. Work with contracted tool vendors for purchasing tools for plant.
3. Education and Training
High School Diploma
Utica High School – Utica, Michigan - 1984
Michigan Machinist Training
Certificate, Six month course, Roseville Michigan - 1987
Macomb Community College
Various classes, Continued from machinist training – 1987-1991
Chrysler NTC Training
Multiple training classes accomplished: Catia, GD&T all classes on file with Chrysler.
Front Range Community College
CIS – Computer Information Systems – 2009-2010, Larimer County, Colorado
Professional References available upon request.