Flow diagram
•Download as PPTX, PDF•
0 likes•16 views
This document outlines steps for uploading data and applying a hybrid discrete wavelet transform and shearlet transform decomposition method for time and frequency domain analysis of signals. The steps include uploading data, applying the hybrid DWT and S-transform for decomposition, correcting any shifts, performing Fourier transform analysis in the time and frequency domains, and measuring the execution time.
Report
Share
Report
Share
Recommended
A review of time‐frequency methods
Spectral estimation, and corresponding time-frequency representation for nonstationary signals, is a cornerstone in geophysical signal processing and interpretation. The last 10–15 years have seen the development of many new high-resolution decompositions that are often fundamentally different from Fourier and wavelet transforms. These conventional techniques, like the short-time Fourier transform and the continuous wavelet transform, show some limitations in terms of resolution (localization) due to the trade-off between time and frequency localizations and smearing due to the finite size of the time series of their template. Well-known techniques, like autoregressive methods and basis pursuit, and recently developed techniques, such as empirical mode decomposition and the synchrosqueezing transform, can achieve higher time-frequency localization due to reduced spectral smearing and leakage. We first review the theory of various established and novel techniques, pointing out their assumptions, adaptability, and expected time-frequency localization. We illustrate their performances on a provided collection of benchmark signals, including a laughing voice, a volcano tremor, a microseismic event, and a global earthquake, with the intention to provide a fair comparison of the pros and cons of each method. Finally, their outcomes are discussed and possible avenues for improvements are proposed.
Parameter Space Noise for Exploration
Parameter space noise is a simple method for exploration in reinforcement learning where noise is added to the policy parameters at the start of each episode. It balances exploration and exploitation better than epsilon-greedy or bootstrapped DQN in environments requiring directed exploration like chain environments. It also outperforms action space noise in continuous control tasks with DDPG and is better than alternatives in sparse reward environments. The method is applicable to both on and off-policy algorithms and provides an orthogonal exploration technique to other advances in deep reinforcement learning.
Williams_FR1_TO4_5_2011_07_29v1.ppt
The document summarizes the development of a dual-frequency FM-CW radar system to study precipitation at close ranges of less than 150 meters. Key aspects include using technologies from mobile phones, police radar, and video games to build inexpensive radar hardware costing less than $12,000. The system is able to achieve 5-meter range resolution and generates Doppler velocity spectra at each range based on signal processing using two FFTs. Initial observations captured snow and rain events.
Short-time homomorphic wavelet estimation
Wavelet estimation plays an important role in many seismic processes like impedance inversion, amplitude versus offset (AVO) and full waveform inversion (FWI). Statistical methods of wavelet estimation away from well control are a desirable tool to support seismic signal processing. One of these methods based on Homomorphic analysis has long intrigued as a potentially elegant solution to the wavelet estimation problem. Yet a successful implementation has proven difficult. We propose here a method based short-time homomorphic analysis which includes elements of the classical cepstrum analysis and log spectral averaging. Our proposal increases the number of segments, thus reducing estimation variances. Results show good performance on realistic synthetic examples.
Wavelet
The document introduces the limitations of Fourier transforms for analyzing non-stationary signals and discusses how wavelet transforms provide a solution. Fourier transforms can only provide frequency content over the entire signal duration and cannot localize this content in time. Wavelet transforms overcome this by analyzing the signal with translated and scaled versions of an analyzing wavelet, allowing time-frequency localization. This provides a time-frequency representation of non-stationary signals and indicates when different frequency components occur.
WesternGeco presentation - Seismic Data Processing
This document outlines a simple seismic data processing workflow consisting of 23 steps: 1) field data input, 2) geometry update, 3) trace editing, 4) amplitude recovery, 5) noise attenuation, 6) deconvolution, 7) CMP sorting, 8) NMO correction, 9) stretch mute, 10) demutiple, 11) migration, 12) stacking, and 13) post-stack processing. The workflow aims to reformat raw field data, remove noise, correct for geometric spreading and velocity variations, and stack the data to generate a final seismic section for client delivery and interpretation.
F-K Filtering for Seismic Data Processing
F-K filtering is a technique used in seismic data processing that transforms seismic traces from the time-space (T-X) domain to the frequency-wavenumber (F-K) domain. In the F-K domain, events with different apparent velocities appear as linear trends with distinct dips, allowing them to be separated using filters that reject data between defined positive and negative velocity cut lines. The filtered F-K domain data is then transformed back to the T-X domain, attenuating unwanted linear events while preserving the desired event, such as a first break refraction. The key steps are 1) transforming to F-K, 2) defining velocity filters, 3) multiplying data in pass/reject zones,
Wavelet Transform and DSP Applications
Fourier Transform : Its power and Limitations – Short Time Fourier Transform – The Gabor Transform - Discrete Time Fourier Transform and filter banks – Continuous Wavelet Transform – Wavelet Transform Ideal Case – Perfect Reconstruction Filter Banks and wavelets – Recursive multi-resolution decomposition – Haar Wavelet – Daubechies Wavelet.
Recommended
A review of time‐frequency methods
Spectral estimation, and corresponding time-frequency representation for nonstationary signals, is a cornerstone in geophysical signal processing and interpretation. The last 10–15 years have seen the development of many new high-resolution decompositions that are often fundamentally different from Fourier and wavelet transforms. These conventional techniques, like the short-time Fourier transform and the continuous wavelet transform, show some limitations in terms of resolution (localization) due to the trade-off between time and frequency localizations and smearing due to the finite size of the time series of their template. Well-known techniques, like autoregressive methods and basis pursuit, and recently developed techniques, such as empirical mode decomposition and the synchrosqueezing transform, can achieve higher time-frequency localization due to reduced spectral smearing and leakage. We first review the theory of various established and novel techniques, pointing out their assumptions, adaptability, and expected time-frequency localization. We illustrate their performances on a provided collection of benchmark signals, including a laughing voice, a volcano tremor, a microseismic event, and a global earthquake, with the intention to provide a fair comparison of the pros and cons of each method. Finally, their outcomes are discussed and possible avenues for improvements are proposed.
Parameter Space Noise for Exploration
Parameter space noise is a simple method for exploration in reinforcement learning where noise is added to the policy parameters at the start of each episode. It balances exploration and exploitation better than epsilon-greedy or bootstrapped DQN in environments requiring directed exploration like chain environments. It also outperforms action space noise in continuous control tasks with DDPG and is better than alternatives in sparse reward environments. The method is applicable to both on and off-policy algorithms and provides an orthogonal exploration technique to other advances in deep reinforcement learning.
Williams_FR1_TO4_5_2011_07_29v1.ppt
The document summarizes the development of a dual-frequency FM-CW radar system to study precipitation at close ranges of less than 150 meters. Key aspects include using technologies from mobile phones, police radar, and video games to build inexpensive radar hardware costing less than $12,000. The system is able to achieve 5-meter range resolution and generates Doppler velocity spectra at each range based on signal processing using two FFTs. Initial observations captured snow and rain events.
Short-time homomorphic wavelet estimation
Wavelet estimation plays an important role in many seismic processes like impedance inversion, amplitude versus offset (AVO) and full waveform inversion (FWI). Statistical methods of wavelet estimation away from well control are a desirable tool to support seismic signal processing. One of these methods based on Homomorphic analysis has long intrigued as a potentially elegant solution to the wavelet estimation problem. Yet a successful implementation has proven difficult. We propose here a method based short-time homomorphic analysis which includes elements of the classical cepstrum analysis and log spectral averaging. Our proposal increases the number of segments, thus reducing estimation variances. Results show good performance on realistic synthetic examples.
Wavelet
The document introduces the limitations of Fourier transforms for analyzing non-stationary signals and discusses how wavelet transforms provide a solution. Fourier transforms can only provide frequency content over the entire signal duration and cannot localize this content in time. Wavelet transforms overcome this by analyzing the signal with translated and scaled versions of an analyzing wavelet, allowing time-frequency localization. This provides a time-frequency representation of non-stationary signals and indicates when different frequency components occur.
WesternGeco presentation - Seismic Data Processing
This document outlines a simple seismic data processing workflow consisting of 23 steps: 1) field data input, 2) geometry update, 3) trace editing, 4) amplitude recovery, 5) noise attenuation, 6) deconvolution, 7) CMP sorting, 8) NMO correction, 9) stretch mute, 10) demutiple, 11) migration, 12) stacking, and 13) post-stack processing. The workflow aims to reformat raw field data, remove noise, correct for geometric spreading and velocity variations, and stack the data to generate a final seismic section for client delivery and interpretation.
F-K Filtering for Seismic Data Processing
F-K filtering is a technique used in seismic data processing that transforms seismic traces from the time-space (T-X) domain to the frequency-wavenumber (F-K) domain. In the F-K domain, events with different apparent velocities appear as linear trends with distinct dips, allowing them to be separated using filters that reject data between defined positive and negative velocity cut lines. The filtered F-K domain data is then transformed back to the T-X domain, attenuating unwanted linear events while preserving the desired event, such as a first break refraction. The key steps are 1) transforming to F-K, 2) defining velocity filters, 3) multiplying data in pass/reject zones,
Wavelet Transform and DSP Applications
Fourier Transform : Its power and Limitations – Short Time Fourier Transform – The Gabor Transform - Discrete Time Fourier Transform and filter banks – Continuous Wavelet Transform – Wavelet Transform Ideal Case – Perfect Reconstruction Filter Banks and wavelets – Recursive multi-resolution decomposition – Haar Wavelet – Daubechies Wavelet.
Capria no_video_ship_detection_with_dvbt_software_defined_passive_radar
This document summarizes research on using DVB-T signals for passive radar ship detection. DVB-T signals provide a large bandwidth and wide coverage suitable for passive radar. Preliminary experiments using a USRP software defined radio were able to detect ships up to 5 nautical miles away departing from a nearby harbor based on the Doppler frequency shifts measured. Future work aims to conduct experiments with cooperative targets and improve the system's range resolution and processing algorithms.
The active remote sensing equation
An introduction to the active remote sensing equation which is the basis of radar, lidar and sodar measurements.
Synthetic aperture radar_advanced
This document provides information about an upcoming training course on advanced synthetic aperture radar (SAR) processing being offered by the Applied Technology Institute (ATI). The 2-day course will be held on May 6-7, 2009 in Chantilly, Virginia and will be instructed by Bart Huxtable. It will cover topics such as SAR review origins, basic and advanced SAR processing techniques, interferometric SAR, spotlight mode SAR, and polarimetric SAR. The course outline and schedule are provided along with instructor biographies and registration information. Additionally, the document advertises ATI's ability to provide on-site customized training courses.
Slides on haps comms. sibircon 2008.novosibirsk.rusia
This document summarizes a simulation of HAPS (high-altitude platform station) systems performance at 28 GHz using LDPC coding and M-APSK modulation over a Ka band channel model. A digital coded transmission scheme for HAPS in the Ka band is proposed and its performance is evaluated via simulation. The simulation considers a time series generator to model short-term rain fading and frequency scaling to adapt attenuation measurements from 40 GHz to 28 GHz. The simulation results show that the best performing system is LDPC coding with a rate of 1/3, 16-APSK modulation, a codeword length of 16,200 bits, and 50 iterations for decoding over the rainy channel model.
Principles of seismic data processing m.m.badawy
This document provides an overview of principles of seismic data processing. It discusses key concepts like seismic generation, data processing steps, velocity analysis, noise attenuation techniques, and common processing flows. The document is divided into multiple chapters that cover topics such as wave propagation, reflection coefficients, deconvolution, F-K transforms, and factors that affect seismic amplitudes. Specific noise types like swell noise are also explained and methods to attenuate them, such as using band-pass filters or amplitude/frequency filters, are described.
Seismic data processing
This document discusses seismic data processing concepts and computer systems used for digital filtering. It explains that seismic data recorded in the field is processed using computer programs to transform it into a usable geological record section. The processing involves steps like demultiplexing, applying static and normal moveout corrections, filtering, stacking, and other analyses to improve data quality and clarity for geological interpretation. Digital computers allow complex processing techniques to be applied to enhance seismic data and better reveal subsurface structures.
Gps signals
GPS signals contain information to identify each satellite, the satellite's location, timing details, and navigation data. Signals are modulated using phase-shift keying onto two carrier frequencies, L1 and L2. The C/A code and encrypted P-code are modulated onto L1, while only the P-code is modulated onto L2. Digital signal processing techniques like filtering, frequency translation, correlation and cross-correlation are used in GPS receivers to acquire and track satellite signals. Anti-spoofing of the P-code led to techniques like squaring, code-aided squaring, cross-correlation and Z-tracking to still allow civilian use of the encrypted signal.
Automated seismic-to-well ties?
Automatic seismic to well tying. See the video for the maple leaf to signal conversion here: https://www.youtube.com/watch?v=lmWDgTrsgw4
Introduction to Data Structure
Data structures organize data in computer memory. Arrays and lists are common data structures. Arrays use indexes to access fixed size elements, while lists allow insertions/deletions anywhere. Summing and multiplying arrays and matrices are important algorithms. Summing an array involves iterating through elements and adding to a running total. Multiplying matrices involves nested loops to calculate each element as the sum of products of corresponding row and column elements from the two matrices.
Stack Algorithm
The document discusses stacks and their applications. Stacks follow LIFO (last-in, first-out) order and allow insertions and removals only from the top. Common applications include evaluating arithmetic expressions by converting them to postfix notation and solving problems like Tower of Hanoi. The algorithms for push, pop, infix to postfix conversion and postfix evaluation are presented.
Data Structure (MC501)
The document provides an overview of several sorting algorithms, including insertion sort, bubble sort, selection sort, and radix sort. It describes the basic approach for each algorithm through examples and pseudocode. Analysis of the time complexity is also provided, with insertion sort, bubble sort, and selection sort having worst-case performance of O(n^2) and radix sort having performance of O(nk) where k is the number of passes.
Cs501 trc drc
This document discusses tuple relational calculus (TRC) and domain relational calculus (DRC), which are nonprocedural query languages for relational databases. It provides examples of queries written in TRC and DRC on sample bank data. It also covers the syntax and semantics of predicates in TRC/DRC, including quantifiers, connectives, and safety conditions for queries to return finite result sets. Expressive power and equivalence between the basic relational algebra and the two calculi are also discussed.
Cs501 transaction
This document discusses transaction management in databases. It defines a transaction as a unit of program execution that accesses and updates data items. Transactions must satisfy the ACID properties of atomicity, consistency, isolation, and durability to maintain data integrity. Atomicity ensures that transactions are fully completed or rolled back. Consistency means transactions preserve the consistency constraints of the database. Isolation ensures transactions execute independently without interfering with each other. Durability means transaction changes persist even after failures. The document discusses various concurrency control techniques like serializability to coordinate concurrent transaction execution while preserving isolation.
Cs501 rel algebra
This document discusses query languages and relational algebra operations. It introduces relational algebra as a procedural query language. The basic relational algebra operations are selection, projection, union, set difference, cartesian product, and rename. Examples are provided to illustrate each operation. Additional operations like join, outer join, division and aggregation are also discussed. The document concludes with a discussion of database modification operations like deletion, insertion and updating.
Cs501 mining frequentpatterns
Frequent pattern mining aims to discover patterns that occur frequently in a dataset. It finds inherent regularities without any preconceptions. The frequent patterns can then be used for applications like association rule mining, classification, clustering, and more. Two major approaches for mining frequent patterns are the Apriori algorithm and FP-Growth. Apriori is a generate-and-test method while FP-Growth avoids candidate generation by building a compact data structure called an FP-tree to extract patterns directly.
Cs501 intro
This document provides information about the CS501 Database Systems and Data Mining course. It includes details about the course structure, timings, syllabus, evaluation policy, and introductory concepts about databases and database management systems. The syllabus covers topics such as data models, query languages, database design, data storage and indexing, query processing, and data mining concepts and techniques. Required textbooks and the evaluation criteria consisting of assignments, quizzes, mid-semester and end-semester exams are also specified.
Cs501 fd nf
This document discusses database normalization and functional dependencies. It provides examples of 1st, 2nd, and 3rd normal forms. It defines key concepts like functional dependencies, candidate keys, closure of attribute sets, minimal covers, and extraneous attributes. An example of a supplier-parts database is used to illustrate 2nd normal form. Functional dependencies indicate that city and status are not fully functionally dependent on the primary key, so the relation is not in 2nd normal form.
Cs501 dm intro
The document provides an introduction to data mining. It discusses the growth of data from terabytes to petabytes and how data mining can help extract knowledge from large datasets. The document outlines the evolution of sciences from empirical to theoretical to computational and now data-driven. It also describes the evolution of database technology and defines data mining as the process of discovering interesting patterns from large amounts of data. The key steps of the knowledge discovery process are discussed.
Cs501 data preprocessingdw
This document discusses data preprocessing and data warehouses. It explains that real-world data is often dirty, incomplete, noisy, and inconsistent. Data preprocessing aims to clean and transform raw data into a format suitable for data mining. The key tasks of data preprocessing include data cleaning, integration, transformation, reduction, and discretization. Data cleaning involves techniques like handling missing data, identifying outliers, and resolving inconsistencies. Data integration combines data from multiple sources. The document also defines characteristics of a data warehouse such as being subject-oriented, integrated, time-variant, and nonvolatile.
Cs501 concurrency
This document discusses concurrency control and recovery techniques for databases. It covers various notions of serializability and recoverability. It describes lock-based protocols like two-phase locking and graph-based protocols like tree protocols. It discusses issues like deadlocks, cascading rollbacks, and starvation. It also covers deadlock handling techniques like prevention, detection and recovery.
Cs501 cluster analysis
This document provides an overview of cluster analysis techniques. It begins by defining cluster analysis and its applications. It then categorizes major clustering methods into partitioning methods (like k-means and k-medoids), hierarchical methods, density-based methods, grid-based methods, and model-based methods. The document discusses different data types that can be clustered and measures for determining cluster quality. It also outlines requirements for effective clustering in data mining.
Cs501 classification prediction
This document discusses classification and prediction in machine learning. It defines classification as predicting categorical class labels, while prediction models continuous values. The key steps of classification are constructing a model from a training set and using the model to classify new data. Decision trees and rule-based classifiers are described as common classification methods. Attribute selection measures like information gain and gini index are explained for decision tree induction. The document also covers issues in data preparation and model evaluation for classification tasks.
More Related Content
What's hot
Capria no_video_ship_detection_with_dvbt_software_defined_passive_radar
This document summarizes research on using DVB-T signals for passive radar ship detection. DVB-T signals provide a large bandwidth and wide coverage suitable for passive radar. Preliminary experiments using a USRP software defined radio were able to detect ships up to 5 nautical miles away departing from a nearby harbor based on the Doppler frequency shifts measured. Future work aims to conduct experiments with cooperative targets and improve the system's range resolution and processing algorithms.
The active remote sensing equation
An introduction to the active remote sensing equation which is the basis of radar, lidar and sodar measurements.
Synthetic aperture radar_advanced
This document provides information about an upcoming training course on advanced synthetic aperture radar (SAR) processing being offered by the Applied Technology Institute (ATI). The 2-day course will be held on May 6-7, 2009 in Chantilly, Virginia and will be instructed by Bart Huxtable. It will cover topics such as SAR review origins, basic and advanced SAR processing techniques, interferometric SAR, spotlight mode SAR, and polarimetric SAR. The course outline and schedule are provided along with instructor biographies and registration information. Additionally, the document advertises ATI's ability to provide on-site customized training courses.
Slides on haps comms. sibircon 2008.novosibirsk.rusia
This document summarizes a simulation of HAPS (high-altitude platform station) systems performance at 28 GHz using LDPC coding and M-APSK modulation over a Ka band channel model. A digital coded transmission scheme for HAPS in the Ka band is proposed and its performance is evaluated via simulation. The simulation considers a time series generator to model short-term rain fading and frequency scaling to adapt attenuation measurements from 40 GHz to 28 GHz. The simulation results show that the best performing system is LDPC coding with a rate of 1/3, 16-APSK modulation, a codeword length of 16,200 bits, and 50 iterations for decoding over the rainy channel model.
Principles of seismic data processing m.m.badawy
This document provides an overview of principles of seismic data processing. It discusses key concepts like seismic generation, data processing steps, velocity analysis, noise attenuation techniques, and common processing flows. The document is divided into multiple chapters that cover topics such as wave propagation, reflection coefficients, deconvolution, F-K transforms, and factors that affect seismic amplitudes. Specific noise types like swell noise are also explained and methods to attenuate them, such as using band-pass filters or amplitude/frequency filters, are described.
Seismic data processing
This document discusses seismic data processing concepts and computer systems used for digital filtering. It explains that seismic data recorded in the field is processed using computer programs to transform it into a usable geological record section. The processing involves steps like demultiplexing, applying static and normal moveout corrections, filtering, stacking, and other analyses to improve data quality and clarity for geological interpretation. Digital computers allow complex processing techniques to be applied to enhance seismic data and better reveal subsurface structures.
Gps signals
GPS signals contain information to identify each satellite, the satellite's location, timing details, and navigation data. Signals are modulated using phase-shift keying onto two carrier frequencies, L1 and L2. The C/A code and encrypted P-code are modulated onto L1, while only the P-code is modulated onto L2. Digital signal processing techniques like filtering, frequency translation, correlation and cross-correlation are used in GPS receivers to acquire and track satellite signals. Anti-spoofing of the P-code led to techniques like squaring, code-aided squaring, cross-correlation and Z-tracking to still allow civilian use of the encrypted signal.
Automated seismic-to-well ties?
Automatic seismic to well tying. See the video for the maple leaf to signal conversion here: https://www.youtube.com/watch?v=lmWDgTrsgw4
What's hot (8)
Capria no_video_ship_detection_with_dvbt_software_defined_passive_radar
Capria no_video_ship_detection_with_dvbt_software_defined_passive_radar
Slides on haps comms. sibircon 2008.novosibirsk.rusia
Slides on haps comms. sibircon 2008.novosibirsk.rusia
More from Kamal Singh Lodhi
Introduction to Data Structure
Data structures organize data in computer memory. Arrays and lists are common data structures. Arrays use indexes to access fixed size elements, while lists allow insertions/deletions anywhere. Summing and multiplying arrays and matrices are important algorithms. Summing an array involves iterating through elements and adding to a running total. Multiplying matrices involves nested loops to calculate each element as the sum of products of corresponding row and column elements from the two matrices.
Stack Algorithm
The document discusses stacks and their applications. Stacks follow LIFO (last-in, first-out) order and allow insertions and removals only from the top. Common applications include evaluating arithmetic expressions by converting them to postfix notation and solving problems like Tower of Hanoi. The algorithms for push, pop, infix to postfix conversion and postfix evaluation are presented.
Data Structure (MC501)
The document provides an overview of several sorting algorithms, including insertion sort, bubble sort, selection sort, and radix sort. It describes the basic approach for each algorithm through examples and pseudocode. Analysis of the time complexity is also provided, with insertion sort, bubble sort, and selection sort having worst-case performance of O(n^2) and radix sort having performance of O(nk) where k is the number of passes.
Cs501 trc drc
This document discusses tuple relational calculus (TRC) and domain relational calculus (DRC), which are nonprocedural query languages for relational databases. It provides examples of queries written in TRC and DRC on sample bank data. It also covers the syntax and semantics of predicates in TRC/DRC, including quantifiers, connectives, and safety conditions for queries to return finite result sets. Expressive power and equivalence between the basic relational algebra and the two calculi are also discussed.
Cs501 transaction
This document discusses transaction management in databases. It defines a transaction as a unit of program execution that accesses and updates data items. Transactions must satisfy the ACID properties of atomicity, consistency, isolation, and durability to maintain data integrity. Atomicity ensures that transactions are fully completed or rolled back. Consistency means transactions preserve the consistency constraints of the database. Isolation ensures transactions execute independently without interfering with each other. Durability means transaction changes persist even after failures. The document discusses various concurrency control techniques like serializability to coordinate concurrent transaction execution while preserving isolation.
Cs501 rel algebra
This document discusses query languages and relational algebra operations. It introduces relational algebra as a procedural query language. The basic relational algebra operations are selection, projection, union, set difference, cartesian product, and rename. Examples are provided to illustrate each operation. Additional operations like join, outer join, division and aggregation are also discussed. The document concludes with a discussion of database modification operations like deletion, insertion and updating.
Cs501 mining frequentpatterns
Frequent pattern mining aims to discover patterns that occur frequently in a dataset. It finds inherent regularities without any preconceptions. The frequent patterns can then be used for applications like association rule mining, classification, clustering, and more. Two major approaches for mining frequent patterns are the Apriori algorithm and FP-Growth. Apriori is a generate-and-test method while FP-Growth avoids candidate generation by building a compact data structure called an FP-tree to extract patterns directly.
Cs501 intro
This document provides information about the CS501 Database Systems and Data Mining course. It includes details about the course structure, timings, syllabus, evaluation policy, and introductory concepts about databases and database management systems. The syllabus covers topics such as data models, query languages, database design, data storage and indexing, query processing, and data mining concepts and techniques. Required textbooks and the evaluation criteria consisting of assignments, quizzes, mid-semester and end-semester exams are also specified.
Cs501 fd nf
This document discusses database normalization and functional dependencies. It provides examples of 1st, 2nd, and 3rd normal forms. It defines key concepts like functional dependencies, candidate keys, closure of attribute sets, minimal covers, and extraneous attributes. An example of a supplier-parts database is used to illustrate 2nd normal form. Functional dependencies indicate that city and status are not fully functionally dependent on the primary key, so the relation is not in 2nd normal form.
Cs501 dm intro
The document provides an introduction to data mining. It discusses the growth of data from terabytes to petabytes and how data mining can help extract knowledge from large datasets. The document outlines the evolution of sciences from empirical to theoretical to computational and now data-driven. It also describes the evolution of database technology and defines data mining as the process of discovering interesting patterns from large amounts of data. The key steps of the knowledge discovery process are discussed.
Cs501 data preprocessingdw
This document discusses data preprocessing and data warehouses. It explains that real-world data is often dirty, incomplete, noisy, and inconsistent. Data preprocessing aims to clean and transform raw data into a format suitable for data mining. The key tasks of data preprocessing include data cleaning, integration, transformation, reduction, and discretization. Data cleaning involves techniques like handling missing data, identifying outliers, and resolving inconsistencies. Data integration combines data from multiple sources. The document also defines characteristics of a data warehouse such as being subject-oriented, integrated, time-variant, and nonvolatile.
Cs501 concurrency
This document discusses concurrency control and recovery techniques for databases. It covers various notions of serializability and recoverability. It describes lock-based protocols like two-phase locking and graph-based protocols like tree protocols. It discusses issues like deadlocks, cascading rollbacks, and starvation. It also covers deadlock handling techniques like prevention, detection and recovery.
Cs501 cluster analysis
This document provides an overview of cluster analysis techniques. It begins by defining cluster analysis and its applications. It then categorizes major clustering methods into partitioning methods (like k-means and k-medoids), hierarchical methods, density-based methods, grid-based methods, and model-based methods. The document discusses different data types that can be clustered and measures for determining cluster quality. It also outlines requirements for effective clustering in data mining.
Cs501 classification prediction
This document discusses classification and prediction in machine learning. It defines classification as predicting categorical class labels, while prediction models continuous values. The key steps of classification are constructing a model from a training set and using the model to classify new data. Decision trees and rule-based classifiers are described as common classification methods. Attribute selection measures like information gain and gini index are explained for decision tree induction. The document also covers issues in data preparation and model evaluation for classification tasks.
Attribute Classification
This document appears to list various attributes without context or descriptions. It includes gender classifications like "Female" and "Male" as well as descriptions of people such as "Three Person" and "Two Person". It also lists objects like "Helmet", "Mask", and "Carrying Bag".
Real Time ImageVideo Processing with Applications in Face Recognition
This document presents a method for real-time face recognition using principal component analysis (PCA). PCA is used to reduce the dimensionality of face images and encode the key variations between known face images. Faces are represented as vectors, and PCA finds the principal components that best account for variance in the training face data. Test faces are then classified by projecting into this reduced PCA subspace and finding the closest face images. The method achieved a 75% accuracy rate on a test set of 8 faces.
More from Kamal Singh Lodhi (16)
Real Time ImageVideo Processing with Applications in Face Recognition
Real Time ImageVideo Processing with Applications in Face Recognition
Recently uploaded
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdDigital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcYour Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Recently uploaded (20)
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Flow diagram
- 1. START UPLOAD DATA Apply Hybrid DWT + S- Transform Decomposition Shift Correction Fourier Transform Time Domain Analysis Frequency Domain Analysis Execution Time