FL Studio: Automatization in 3 steps
•Download as PPTX, PDF•
0 likes•347 views
Isra from Argentina shares how she simplified automation in FL Studio into 3 easy steps. She selects the "Main automation" pattern to add a fade in to the entire mix. While recording automation, any changes are saved to a new pattern added to the playlist. With the different tools, handmade levels can be transformed into perfect lines, and the preset can be saved. Isra concludes that automation is simple to create and edit in FL Studio.
Report
Share
Report
Share
Recommended
Equipment guide list
This document lists the equipment, software, and assets needed to film and edit a short film. It includes cameras, tripods, SD cards, lights, headphones, microphones, computers, and software like Adobe Premiere Pro and Photoshop. Additional assets listed are studio titles, special effects, sound effects, background music, stock footage, and stock images to make the film look more professional and add elements that cannot be achieved during filming. The document explains what each item will be used for, such as cameras to film shots, tripods for steady shots, SD cards and computers to store and edit footage, and software to edit video, audio, and images.
Monitor mix practical: Demonstrate the configuration of a monitor mix in a DAW
The document provides instructions for configuring a monitor mix in a digital audio workstation (DAW). It demonstrates selecting tracks to send to a bus, setting the bus sends to pre-fader, setting all gains to unity, assigning an output for the bus mix, and creating additional mixes by repeating the process. The goal is to create independent monitor mixes that can be output to different outputs on an audio interface.
FL Studio Tutorial -1
က်ေနာ္လုပ္လက္စ FL project ေလးတစ္ခုရဲ့ အဆင့္ေတြကို မွတ္တမ္းတင္ထားတာပါ။
လိုအပ္တဲ့သူေတြ အတြက္ အသံုးတည့္လိမ့္မယ္လို႔ ေမွ်ာ္လင့္ပါတယ္။
How to record and edit automation in GarageBand
This document provides instructions for recording and editing automation in a digital audio workstation (DAW). It begins with an introduction that notes the author's name and location. The document then outlines prerequisites for hardware setup and audio recording in a DAW. The main part describes how to automate volume, panning, effects, and the master track using the same automation techniques. Links are provided for additional resources on the author's music and tutorials.
Audio rendering: from sound diffusion to sound projection
The document discusses audio rendering techniques, including a history of loudspeaker development, directivity patterns, line arrays, and digital signal processing applications. It provides examples of early line array systems from the 1950s and 1990s, describes contemporary line array designs, and discusses how directivity can be shaped using uniform and tapered linear arrays as well as delays. It also covers topics like spatial audio rendering, acoustic holography, room compensation, and virtual acoustics.
Audition Ppt
The document discusses the auditory system including:
1) An overview of sound properties, the peripheral mechanisms of hearing including ear structure and transduction, and coding of sound.
2) The functions of the auditory system including sound identification, localization, and communication.
3) Details on the anatomy and physiology of the ear including sound transmission through the outer, middle, and inner ear as well as transduction of sound by hair cells in the cochlea.
Add a software instrument and record MIDI and quantize in your DAW
The document provides instructions for adding a software instrument and recording MIDI in a DAW. It outlines steps like creating a new project, choosing a MIDI instrument from presets or the I/O list, renaming tracks, tweaking instrument sounds, activating a click track, recording MIDI, and viewing the recorded notes in the piano roll. The overall goal is to entertain the reader by walking through a basic MIDI recording and editing workflow in a digital audio workstation.
Recommended
Equipment guide list
This document lists the equipment, software, and assets needed to film and edit a short film. It includes cameras, tripods, SD cards, lights, headphones, microphones, computers, and software like Adobe Premiere Pro and Photoshop. Additional assets listed are studio titles, special effects, sound effects, background music, stock footage, and stock images to make the film look more professional and add elements that cannot be achieved during filming. The document explains what each item will be used for, such as cameras to film shots, tripods for steady shots, SD cards and computers to store and edit footage, and software to edit video, audio, and images.
Monitor mix practical: Demonstrate the configuration of a monitor mix in a DAW
The document provides instructions for configuring a monitor mix in a digital audio workstation (DAW). It demonstrates selecting tracks to send to a bus, setting the bus sends to pre-fader, setting all gains to unity, assigning an output for the bus mix, and creating additional mixes by repeating the process. The goal is to create independent monitor mixes that can be output to different outputs on an audio interface.
FL Studio Tutorial -1
က်ေနာ္လုပ္လက္စ FL project ေလးတစ္ခုရဲ့ အဆင့္ေတြကို မွတ္တမ္းတင္ထားတာပါ။
လိုအပ္တဲ့သူေတြ အတြက္ အသံုးတည့္လိမ့္မယ္လို႔ ေမွ်ာ္လင့္ပါတယ္။
How to record and edit automation in GarageBand
This document provides instructions for recording and editing automation in a digital audio workstation (DAW). It begins with an introduction that notes the author's name and location. The document then outlines prerequisites for hardware setup and audio recording in a DAW. The main part describes how to automate volume, panning, effects, and the master track using the same automation techniques. Links are provided for additional resources on the author's music and tutorials.
Audio rendering: from sound diffusion to sound projection
The document discusses audio rendering techniques, including a history of loudspeaker development, directivity patterns, line arrays, and digital signal processing applications. It provides examples of early line array systems from the 1950s and 1990s, describes contemporary line array designs, and discusses how directivity can be shaped using uniform and tapered linear arrays as well as delays. It also covers topics like spatial audio rendering, acoustic holography, room compensation, and virtual acoustics.
Audition Ppt
The document discusses the auditory system including:
1) An overview of sound properties, the peripheral mechanisms of hearing including ear structure and transduction, and coding of sound.
2) The functions of the auditory system including sound identification, localization, and communication.
3) Details on the anatomy and physiology of the ear including sound transmission through the outer, middle, and inner ear as well as transduction of sound by hair cells in the cochlea.
Add a software instrument and record MIDI and quantize in your DAW
The document provides instructions for adding a software instrument and recording MIDI in a DAW. It outlines steps like creating a new project, choosing a MIDI instrument from presets or the I/O list, renaming tracks, tweaking instrument sounds, activating a click track, recording MIDI, and viewing the recorded notes in the piano roll. The overall goal is to entertain the reader by walking through a basic MIDI recording and editing workflow in a digital audio workstation.
Mastering
The document discusses the process of mastering music, including defining mastering as tweaking the final stereo mix. It covers topics like the loudness war where increased compression is used to make recordings louder, new standards for measuring loudness like LUFS, considerations for dynamic range and headroom, tools used in mastering like compression and EQ, and the importance of monitoring on different systems when finalizing a track.
Recording Session Management
This document discusses the roles and responsibilities involved in managing a recording session. It emphasizes that recording sessions require strong teamwork and predefined roles. The live room engineers are responsible for microphone setup, cable management, foldback, and artist/instrument positioning. The control room engineers operate the recording equipment and software, recording takes and monitoring signals. The producer is in charge of conducting activities according to the session plan, passing instructions, and ensuring the well-being of the artists. Effective communication and clear roles are important for a successful recording session.
Auxiliaries and Insert Points
Auxiliaries are used to send signals to external effects units and provide foldback mixes to musicians. They allow a copy of the channel signal to be tapped and sent to an external device. Insert points break the channel signal path to process the signal through an external unit, returning it to the same point in the channel. The document discusses auxiliaries, insert points, pre/post fade sends, effects returns and how they are used with mixing consoles and external processors.
An Introduction to the Mixing Console
The document discusses the basic principles of mixing consoles, including their typical sections and configurations. It describes the two main types of consoles: split consoles, which separate the input and monitor paths, and in-line consoles, which include both paths on the same channel strip. It also outlines the basic signal flow through a mixing console, from the input gain and routing, through equalization, auxiliary sends, panning, and solo/mute, to the output buses, group sends, recording outputs, and monitor outputs.
The Recording Environment part 1
This document discusses sound waves and room acoustics. It explains that sound travels as longitudinal waves through air and other substances. When sound waves hit surfaces in an enclosed space, they are reflected and create reverberation over time. The time it takes for reverberation to decay by 60dB is known as the reverberation time or RT60, which provides an objective measurement of room acoustics. Room reflections are important for both the direct sound picked up by microphones and the diffuse room tone, which conveys information about the size and surfaces of the space.
Record audio in Studio One V2 - Stefano Ribaudo
This document provides a step-by-step tutorial for recording audio in a digital audio workstation (DAW). It outlines preparing the DAW project, creating audio tracks, setting the click and countdown, and efficiently recording audio. The tutorial uses Presonus Studio One and a Focusrite audio interface to record vocal audio over multiple takes through a microphone and XLR cable.
Sources for audio lesson two second year fourt quarter
There are several methods for producing and capturing sounds, including audio recording and reproduction techniques as well as obtaining sounds from the web. Audio can be recorded using both analog and digital methods. Analog recording stores audio as a continuous wave in a medium, such as using early phonographs, wire recordings, or magnetic tape. Digital recording converts analog sound waves into a stream of discrete numbers through techniques like pulse code modulation, allowing for clearer reproduction of sound.
Prepare a project in the daw (week3)
The document discusses the technical preparations needed before starting a music production project in a digital audio workstation (DAW). It recommends configuring the project name and file location, digital audio preferences like sample rate and bit depth, recording file type as an uncompressed wav or aiff file, hardware settings to connect an audio interface, and buffer size starting at 128 samples per second. The goal is to properly configure the DAW and set expectations for file management before beginning the music production process.
Recording a Big Band
The jazz big band was most popular in the 1940s but declined in the 1950s. However, big bands have persisted with people continuing to play in and record them. One famous example is Benny Goodman's 1938 live recording at Carnegie Hall which used two microphones and showed the band's brassier sound compared to studio recordings. For the Blackhawk Big Band recording session, various microphones were used including overhead, close mics, and boundary mics to capture each section. The recording captured the band's unique rehearsal-style seating arrangement and provided an evaluation of techniques that could be improved.
Beautiful in My Eyes – beautiful girls with beautiful music ‘beautiful in my ...
This short document discusses a music video for the song "Beautiful in My Eyes" by Joshua Kadison. It thanks viewers for watching and credits the source of images of beautiful girls featured in the video as the website www.music.
The Recording Environment Part 2
Absorption Coefficients
The Sabine Equation
Reverb Calculation Example 1
Estimating the Reverberation Time
Reverb Calculation Example 2
Correcting the Reverberation Time
Control of Interfering Noise
Absorbers
Recording Solutions
b. 3 to 1 Rule
c. Working in Mono
d. Comb Filtering
Audio production
This document discusses the key components and layout of a recording studio. It explains that proper planning of speaker placement, monitor positioning facing the producer, and inclusion of a mixing desk and MIDI keyboard are important for the studio layout. The control room layout centers around a computer connected to instruments for multi-track recording and editing. Professional studios also include soundproof recording rooms and a window between rooms for communication.
Tutorial editor de audio
FL Studio 10 es un editor de audio fácil de usar que contiene herramientas básicas como guardar proyectos, exportar archivos y trabajar en la lista de reproducción o constructor.
Adobe Audition
Adobe Audition es un software de producción de audio profesional que permite la grabación, edición, mezcla y masterización de audio para tareas como la creación de música, producción de podcasts y anuncios de radio, limpieza de audio de películas y compilación de bandas sonoras. El software ofrece características como compatibilidad con instrumentos virtuales VSTi, edición espectral mejorada, edición multipista y nuevos efectos de sonido. Adobe Audition está diseñado para profesionales de la industria del sonido.
Question 6 medi
The document discusses the skills and techniques learned from creating a magazine product using Photoshop. The author found Photoshop easier to use than expected and was able to create 3 magazine pages with only one issue removing green screen from a model's hair. Shape and text tools in Photoshop were useful for bubbles, mastheads and coverlines. A photo shoot required editing brightness in Photoshop when using flash on a pale model, and the green screen made editing easier than a home background.
Question 6
The document discusses the hardware and software used to create a magazine. The key hardware included an Apple Mac computer, mouse, keyboard, Fujifilm camera, and iPhone. The Mac allowed use of Photoshop and InDesign for layout. The camera was used to take high quality photos. Photoshop was used to edit photos using tools like crop and spot healing. InDesign facilitated text layout across columns. Wordpress helped plan and document the process. Learning involved adapting to Mac differences from Windows and exploring software tools and functions.
What have you learnt about technologies from the process of constructing this...
The document discusses the author's experience using various software programs and websites for their music magazine coursework. At the beginning of the course, the author had no experience using Apple Mac computers, Canon cameras, Blogger, Padlet, Adobe Premier Pro, or Photoshop. Through completing tasks for their music magazine, the author learned to comfortably use these programs and found them useful. They also discovered new font websites 1001 Fonts and Da Font that provided options to represent their rock genre target audience.
Hard ware 2
The document discusses various hardware, software, and technologies the respondent used to construct their product. They learned how to better use a Canon digital camera's aperture feature to control lighting. They learned keyboard shortcuts and file management using Apple Macs. Photoshop, InDesign, and other design software helped edit images and compose the magazine. Prezi, Blogger, and other programs aided in presentations and documentation of the process. Various technologies like studio lights, scanners, and memory cards supported capturing and working with images and files. The respondent gained experience with different features and applications of the technologies.
Problem solving
The document discusses various techniques and potential problems the author may encounter while creating an animation project. Some key points:
- The author will record narration using a Rode mic and Tascam recorder, and may face issues with sensitivity levels and background noise. Test recordings will be done to find the best settings.
- Photoshop and After Effects will be used for animation, but different screen sizes could cause problems. Test renders will ensure consistency.
- Previous Premiere projects had audio and video corruption issues. Backups of source files and regular Premiere saves will prevent lost work.
- Test animations were created to experiment with different styles. A style using simple shapes and layers for
Problem solving
The document discusses various techniques and potential problems the author may encounter while creating an animation project. Some key points:
- The author will record narration using a Rode mic and Tascam recorder, and may face issues with sensitivity levels and background noise. Test recordings will be done to find the best settings.
- Photoshop and After Effects will be used for animation, but different screen sizes could cause problems. Test renders will ensure consistency.
- Previous Premiere projects had audio and video corruption issues. Backups of source files and regular Premiere saves will prevent lost work.
- Test animations were created to experiment with different styles. A style using simple shapes and layers for
Problem solving
Oliver Keppie outlines potential problems and solutions for the audio, animation, and software aspects of his video project. For audio recording, he may encounter issues with microphone sensitivity but plans to test different settings. He will book a quiet recording studio to minimize background noise. For animation, working across Photoshop and After Effects could cause inconsistencies, so he will match screen sizes and contain movements to each program's strengths. Potential software crashes will be addressed by saving regularly to multiple locations. Overall he believes the problems can be easily overcome through preparation and testing.
1. production experiments
The document describes experiments conducted in Adobe Photoshop and Beep Box software to prepare for an animation project. It discusses drawing at a small pixel art scale in Photoshop, using layers and the timeline feature to create frames. It also covers using Beep Box to compose 8-bit music and reusable sound effects. The key findings were that the small file size, layers, and timeline would be essential for efficient animation production in Photoshop, and Beep Box could provide matching sound effects and music.
More Related Content
Viewers also liked
Mastering
The document discusses the process of mastering music, including defining mastering as tweaking the final stereo mix. It covers topics like the loudness war where increased compression is used to make recordings louder, new standards for measuring loudness like LUFS, considerations for dynamic range and headroom, tools used in mastering like compression and EQ, and the importance of monitoring on different systems when finalizing a track.
Recording Session Management
This document discusses the roles and responsibilities involved in managing a recording session. It emphasizes that recording sessions require strong teamwork and predefined roles. The live room engineers are responsible for microphone setup, cable management, foldback, and artist/instrument positioning. The control room engineers operate the recording equipment and software, recording takes and monitoring signals. The producer is in charge of conducting activities according to the session plan, passing instructions, and ensuring the well-being of the artists. Effective communication and clear roles are important for a successful recording session.
Auxiliaries and Insert Points
Auxiliaries are used to send signals to external effects units and provide foldback mixes to musicians. They allow a copy of the channel signal to be tapped and sent to an external device. Insert points break the channel signal path to process the signal through an external unit, returning it to the same point in the channel. The document discusses auxiliaries, insert points, pre/post fade sends, effects returns and how they are used with mixing consoles and external processors.
An Introduction to the Mixing Console
The document discusses the basic principles of mixing consoles, including their typical sections and configurations. It describes the two main types of consoles: split consoles, which separate the input and monitor paths, and in-line consoles, which include both paths on the same channel strip. It also outlines the basic signal flow through a mixing console, from the input gain and routing, through equalization, auxiliary sends, panning, and solo/mute, to the output buses, group sends, recording outputs, and monitor outputs.
The Recording Environment part 1
This document discusses sound waves and room acoustics. It explains that sound travels as longitudinal waves through air and other substances. When sound waves hit surfaces in an enclosed space, they are reflected and create reverberation over time. The time it takes for reverberation to decay by 60dB is known as the reverberation time or RT60, which provides an objective measurement of room acoustics. Room reflections are important for both the direct sound picked up by microphones and the diffuse room tone, which conveys information about the size and surfaces of the space.
Record audio in Studio One V2 - Stefano Ribaudo
This document provides a step-by-step tutorial for recording audio in a digital audio workstation (DAW). It outlines preparing the DAW project, creating audio tracks, setting the click and countdown, and efficiently recording audio. The tutorial uses Presonus Studio One and a Focusrite audio interface to record vocal audio over multiple takes through a microphone and XLR cable.
Sources for audio lesson two second year fourt quarter
There are several methods for producing and capturing sounds, including audio recording and reproduction techniques as well as obtaining sounds from the web. Audio can be recorded using both analog and digital methods. Analog recording stores audio as a continuous wave in a medium, such as using early phonographs, wire recordings, or magnetic tape. Digital recording converts analog sound waves into a stream of discrete numbers through techniques like pulse code modulation, allowing for clearer reproduction of sound.
Prepare a project in the daw (week3)
The document discusses the technical preparations needed before starting a music production project in a digital audio workstation (DAW). It recommends configuring the project name and file location, digital audio preferences like sample rate and bit depth, recording file type as an uncompressed wav or aiff file, hardware settings to connect an audio interface, and buffer size starting at 128 samples per second. The goal is to properly configure the DAW and set expectations for file management before beginning the music production process.
Recording a Big Band
The jazz big band was most popular in the 1940s but declined in the 1950s. However, big bands have persisted with people continuing to play in and record them. One famous example is Benny Goodman's 1938 live recording at Carnegie Hall which used two microphones and showed the band's brassier sound compared to studio recordings. For the Blackhawk Big Band recording session, various microphones were used including overhead, close mics, and boundary mics to capture each section. The recording captured the band's unique rehearsal-style seating arrangement and provided an evaluation of techniques that could be improved.
Beautiful in My Eyes – beautiful girls with beautiful music ‘beautiful in my ...
This short document discusses a music video for the song "Beautiful in My Eyes" by Joshua Kadison. It thanks viewers for watching and credits the source of images of beautiful girls featured in the video as the website www.music.
The Recording Environment Part 2
Absorption Coefficients
The Sabine Equation
Reverb Calculation Example 1
Estimating the Reverberation Time
Reverb Calculation Example 2
Correcting the Reverberation Time
Control of Interfering Noise
Absorbers
Recording Solutions
b. 3 to 1 Rule
c. Working in Mono
d. Comb Filtering
Audio production
This document discusses the key components and layout of a recording studio. It explains that proper planning of speaker placement, monitor positioning facing the producer, and inclusion of a mixing desk and MIDI keyboard are important for the studio layout. The control room layout centers around a computer connected to instruments for multi-track recording and editing. Professional studios also include soundproof recording rooms and a window between rooms for communication.
Tutorial editor de audio
FL Studio 10 es un editor de audio fácil de usar que contiene herramientas básicas como guardar proyectos, exportar archivos y trabajar en la lista de reproducción o constructor.
Adobe Audition
Adobe Audition es un software de producción de audio profesional que permite la grabación, edición, mezcla y masterización de audio para tareas como la creación de música, producción de podcasts y anuncios de radio, limpieza de audio de películas y compilación de bandas sonoras. El software ofrece características como compatibilidad con instrumentos virtuales VSTi, edición espectral mejorada, edición multipista y nuevos efectos de sonido. Adobe Audition está diseñado para profesionales de la industria del sonido.
Viewers also liked (14)
Sources for audio lesson two second year fourt quarter
Sources for audio lesson two second year fourt quarter
Beautiful in My Eyes – beautiful girls with beautiful music ‘beautiful in my ...
Beautiful in My Eyes – beautiful girls with beautiful music ‘beautiful in my ...
Similar to FL Studio: Automatization in 3 steps
Question 6 medi
The document discusses the skills and techniques learned from creating a magazine product using Photoshop. The author found Photoshop easier to use than expected and was able to create 3 magazine pages with only one issue removing green screen from a model's hair. Shape and text tools in Photoshop were useful for bubbles, mastheads and coverlines. A photo shoot required editing brightness in Photoshop when using flash on a pale model, and the green screen made editing easier than a home background.
Question 6
The document discusses the hardware and software used to create a magazine. The key hardware included an Apple Mac computer, mouse, keyboard, Fujifilm camera, and iPhone. The Mac allowed use of Photoshop and InDesign for layout. The camera was used to take high quality photos. Photoshop was used to edit photos using tools like crop and spot healing. InDesign facilitated text layout across columns. Wordpress helped plan and document the process. Learning involved adapting to Mac differences from Windows and exploring software tools and functions.
What have you learnt about technologies from the process of constructing this...
The document discusses the author's experience using various software programs and websites for their music magazine coursework. At the beginning of the course, the author had no experience using Apple Mac computers, Canon cameras, Blogger, Padlet, Adobe Premier Pro, or Photoshop. Through completing tasks for their music magazine, the author learned to comfortably use these programs and found them useful. They also discovered new font websites 1001 Fonts and Da Font that provided options to represent their rock genre target audience.
Hard ware 2
The document discusses various hardware, software, and technologies the respondent used to construct their product. They learned how to better use a Canon digital camera's aperture feature to control lighting. They learned keyboard shortcuts and file management using Apple Macs. Photoshop, InDesign, and other design software helped edit images and compose the magazine. Prezi, Blogger, and other programs aided in presentations and documentation of the process. Various technologies like studio lights, scanners, and memory cards supported capturing and working with images and files. The respondent gained experience with different features and applications of the technologies.
Problem solving
The document discusses various techniques and potential problems the author may encounter while creating an animation project. Some key points:
- The author will record narration using a Rode mic and Tascam recorder, and may face issues with sensitivity levels and background noise. Test recordings will be done to find the best settings.
- Photoshop and After Effects will be used for animation, but different screen sizes could cause problems. Test renders will ensure consistency.
- Previous Premiere projects had audio and video corruption issues. Backups of source files and regular Premiere saves will prevent lost work.
- Test animations were created to experiment with different styles. A style using simple shapes and layers for
Problem solving
The document discusses various techniques and potential problems the author may encounter while creating an animation project. Some key points:
- The author will record narration using a Rode mic and Tascam recorder, and may face issues with sensitivity levels and background noise. Test recordings will be done to find the best settings.
- Photoshop and After Effects will be used for animation, but different screen sizes could cause problems. Test renders will ensure consistency.
- Previous Premiere projects had audio and video corruption issues. Backups of source files and regular Premiere saves will prevent lost work.
- Test animations were created to experiment with different styles. A style using simple shapes and layers for
Problem solving
Oliver Keppie outlines potential problems and solutions for the audio, animation, and software aspects of his video project. For audio recording, he may encounter issues with microphone sensitivity but plans to test different settings. He will book a quiet recording studio to minimize background noise. For animation, working across Photoshop and After Effects could cause inconsistencies, so he will match screen sizes and contain movements to each program's strengths. Potential software crashes will be addressed by saving regularly to multiple locations. Overall he believes the problems can be easily overcome through preparation and testing.
1. production experiments
The document describes experiments conducted in Adobe Photoshop and Beep Box software to prepare for an animation project. It discusses drawing at a small pixel art scale in Photoshop, using layers and the timeline feature to create frames. It also covers using Beep Box to compose 8-bit music and reusable sound effects. The key findings were that the small file size, layers, and timeline would be essential for efficient animation production in Photoshop, and Beep Box could provide matching sound effects and music.
What have you learnt about technologies from the moe
The document discusses the learner's experiences using various software programs for a school project. For Final Cut Pro, the learner realized their early work was poor and learned skills like fading, proper screen size, file organization, and frequent saving. Motion was initially difficult but the learner gained skills like animation and importing into Final Cut Pro by spending time with tutorials. Live Type was found to be limited and more suitable for presentations than film. Garage Band was the most enjoyable as the learner experimented with fitting songs and sound effects to their film project.
Q4: Final Cut Pro
This document provides an overview of the tools and features in Final Cut Pro video editing software. It discusses importing video clips and previewing them. It also describes adding clips to the timeline, using transitions, editing exposure and color, splitting clips with the blade tool, trimming clips, and applying filters. The document demonstrates how Final Cut Pro allows more precise and subtle editing compared to other basic software like Movie Maker.
Problem solving
The document discusses various problems the author may encounter while creating an animated video project, including audio recording issues, software compatibility problems, file corruption, and properly utilizing animation software and tools. The author provides methods for overcoming these problems, such as testing microphone sensitivity, backing up files, practicing animation techniques, and separating character elements across different layers and programs. The techniques, strengths, and experimentation discussed aim to help the author produce high quality animation and audio for the project.
5. fmp pre production(1)
This document outlines Joseph Sam Fulton's pre-production plans for creating a gaming magazine and website. It includes descriptions of the style and layouts he intends to use, as well as the software and resources needed such as Photoshop, Premiere, and images from the internet. A schedule is provided that breaks the work into daily tasks over 8 days, including recording an audio interview, drafting the magazine in Photoshop, creating a logo, and taking screenshots for an evaluation presentation. Contingency plans are also discussed for potential issues like computer or internet problems.
Experiments
The document describes several video editing experiments conducted by Harry Morton, including masking transitions, adding subtitles, mirror effects, color changing, putting video inside text, and slow motion effects. For masking transitions, the key steps are lining up clips, using the pen tool to cut out an area for the transition, and adjusting the outline and feathering over frames. Subtitles can be added with text boxes and animated with scale and position keyframes. Slow motion works best with 60fps footage and the optical flow interpolation setting. Many of these techniques may be used in Harry's final product.
Photoshop skills
This document discusses using Photoshop's quick selection tool and hue/saturation panel to change colors of objects in images. It describes selecting parts of images like eyes, roses, and movie screens and modifying their colors, such as changing eye color to blue, a rose to purple, and making the background of an image black and white while keeping the rose in color. Frame and marquee tools were also used to create the appearance of a movie playing on a theater screen.
What have you learnt about technologies from the process of constructing this...
The document discusses the author's experience using various technology tools before and during their course of study. It describes their initial lack of experience and difficulties using Mac computers, Canon cameras, Blogger, Padlet, Premier Pro, and Photoshop. However, the author gradually gained proficiency through practice and guidance from instructors. They found the tools became easier to use and were useful for completing assignments like creating a music magazine.
Similar to FL Studio: Automatization in 3 steps (15)
What have you learnt about technologies from the process of constructing this...
What have you learnt about technologies from the process of constructing this...
What have you learnt about technologies from the moe
What have you learnt about technologies from the moe
What have you learnt about technologies from the process of constructing this...
What have you learnt about technologies from the process of constructing this...
Recently uploaded
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto RicoCorey Perlman, Social Media Speaker and Consultant
Social media for business The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Recruiting in the Digital Age: A Social Media Masterclass
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Understanding User Needs and Satisfying Them
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Recently uploaded (20)
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto Rico
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Recruiting in the Digital Age: A Social Media Masterclass
Recruiting in the Digital Age: A Social Media Masterclass
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
FL Studio: Automatization in 3 steps
- 2. Hi! I’m Isra from Argentina and I love FL Studio since I’ve started using it a year ago. Although I was impressed by its features, I always wanted to use automation but I didn’t know how to, so I took this chance to learn about it. I simplified the topic in 3 steps to show how simple is! It takes just 5 minutes…
- 3. Dou you want to modify the entire mix or just a channel? Select it! I wanted a fade in on the entire mix, so I selected the pattern: “Main automation”
- 4. Anything you change while recording will be saved. After that you’ll be able to modify it. When you finish you’ll see a new pattern added on your playlist.
- 5. Use the different tools to improve your performance. Try using right click to transform hand made levels on perfect lines. When you’re done, you can save the preset too.
- 6. Did you realize how simple it is to create and edit an automation? I hope you find it easy as I do. Take for granted I’ll use lots of automations from now on! Thanks for your time, I expected not to take more than 5 minutes. Keep producing!