The issue "iPhone stuck on spinning wheel" is one of the most common system glitches for iOS devices. In this guide, you can learn about the causes of iPhone white screen of death and five effecitive solutions to fix.

1. 5 Effective Solutions to
Fix iPhone White Screen
of Death
- Proudly Presented by iSunshare

2. CONTENT OF THIS SLIDE
iPhone white screen of death is a very common and vexed system problem
of iOS devices and there are various kinds of reasons for this problem. In this
post, you can learn about the cause of iPhone white screen of death and five
effective solutions to fix this problem. Even if you are a noob, you can also
repair your iPhone with your own hands like a technician after reading this
post.
 Some common causes of iPhone White Screen of Death
 Solution 1: Hard reset your iPhone
 Solution 2: Check if Screen Magnification is on
 Solution 3: The best way to fix iPhone white screen of death
 Solution 4: Restore iPhone with Recovery or DFU Mode by iTunes
 Solution 5: Contact Apple Support

3. Some common causes of iPhone White Screen of Death
1. iOS update failed
This is the main reason for Apple's white screen. Although updating iOS can fix some bugs, the
existence of certain conflicts may cause the system fail to update and white screen of death.
2. Software upgrade failed
Sometimes the issue of white screen of death occurs after software upgrade. Some major software
may be incompatible with the system after updating.
3. Jailbreak issue
Jailbreak refers to privilege escalation on an Apple device to remove software restrictions. However,
if you use some unreliable tool to jailbreak your iPhone, it may fail to jailbreak and damage iOS
resulting in iPhone white screen of death.
4. Hardware problem
If iPhone white screen of death appears after it is physically or water damaged, it is likely that one
of iPhone components has been broken. So, the iPhone cannot work normally.

4. When your device encounters a problem, the first
choice for most people is to restart it. However, a
general restart will not work in most cases. So, you
can try a hard restart to fix the issue of iPhone white
screen of death. Here’s how to hard reset iPhone of
different versions.
Solution 1: Hard reset your iPhone

5. iPhone 6 and below
1. Hold down the Power and Home buttons at the same time.
2. Keep holding both buttons until the screen turns black and you see
the Apple logo.
3. When the phone goes off, wait for 30 seconds before powering it back
on.
iPhone 7
1. Hold down the Power and Volume Down buttons at the same time.
2. Keep holding both buttons until the screen turns black and you see
the Apple logo.
3. When the phone goes off, wait for 30 seconds before powering it back
on.
iPhone 8 and above
1. Hold down the Volume Up button, then release it.
2. Hold down the Volume Down button, then release it.
3. Press the Power button until the Apple logo appears before releasing it.

6. Solution 2: Check if Screen Magnification is on
Sometimes, there is a chance that
you may turn on Screen
Magnification function by
accident. In this case, you may be
zoomed super close in on
something white which makes it
look like a white screen. Hence, to
fix it, you can follow the steps
below.
Steps: Go to Settings > General
> Accessibility > Zoom > Off.

7. Solution 3: The best way to fix iPhone white screen of
death without data loss
The best way to fix iPhone white screen of death is to use a powerful tool named
iSunshare iOS Repair Genius. It is a powerful and easy-to-use ios repair tool that
enables you to fix most of common system issues like white screen of death
without any data loss. Here’s a full guide on how to use iOS Repair Genius to fix
the problem of white screen of death.

8. Step 1: Download and
install this app on your
computer. Open this app
and connect your iPhone
to computer.
Step 2: Select Standard
Mode to fix your iPhone
without data loss.

9. Step 3: Click Start button to continue.

10. Step 4: Make sure that your iPhone is connected to your pc and click Next button
to continue.
Notes: If the app can’t detect your iPhone, you need to put it in DFU Mode or
Recovery Mode. Just follow the guide on the interface.

11. Step 5: Click Download button to download a firmware package. You can click
Select button to choose the location to store firmware package.

12. Step 6: Wait for the application to verify the firmware, then click Repair button to
start repairing.

13. Step 7: It may take
some time to wait.
Once the process of
repair is done, the
app will prompt you
that the device has
been repaired
successfully. Click
OK to close the
window.

14. When your iPhone is stuck on white screen of death, you can restore it to
get it back to normal. However, all the data will be erased. If you don’t care
about the data, follow the steps below to fix your device.
Solution 4: Restore iPhone with Recovery or DFU Mode
by iTunes

15. Step 1: Open iTunes and connect your iPhone to computer via USB
cable.
Step 2: Put your iPhone into Recovery Mode or DFU Mode. You can
try the Recovery Mode first and then the DFU Mode.

16. Step 3: If you choose to put your device into Recovery Mode, there will be two
buttons on the pop-up window, select Restore button and then wait for a while util
the whole process finishes.

17. Step 4: If you put your device
into DFU Mode, you will be
asked to restore your iPhone,
click OK button to continue.
Step 5: Finally, when iTunes
finishes restoring, your iPhone
will restart automatically, your
iPhone comes back to normal.

18. If all the ways mentioned above are not workable,
it's probably a hardware problem that causes
iPhone white screen of death. In this case, you need
to contact Apple Support for help. They can offer
the best support options to help you solve all kinds
of hardware issues.
Solution 5: Contact Apple Support

19. See more details in:
 https://www.isunshare.com/ios-repair-genius/
 https://isunshare.blogspot.com/2020/12/5-
effective-solutions-to-fix-iphone.html
Thanks!