Ruhrpumpen offers a wide range of quality fire pump products including horizontal split case pumps, end suction pumps, and vertical turbine pumps. Their fire pumps are approved by organizations like Underwriter's Laboratories and Factory Mutual. The pumps are available with electric, diesel, or steam turbine drivers. Ruhrpumpen is committed to innovation, efficiency, and quality in their pump technology.
Severe Service Control & Isolation Valves in the Refining IndustryCTi Controltech
Mogas Industries manufactures a line of industrial ball valves specifically designed for the most demanding applications, including extremes of temperature, pressure, abrasive particulates, acidic products, heavy solids build-up, and large pressure differential. The Mogas valves are designed to provide sufficient levels of safety and performance where the results of failure can be catastrophic. Specialty modifications also provide noise reduction and velocity control. The presentation illustrates and explains the special features needed to accommodate the world's most demanding valve applications, as well as providing process schematics for numerous industrial applications that show how the valves are used.
FOR DOWNLOAD THIS GO THROUGH THIS BELOW LINK
https://ezazsidd1993.stores.instamojo.com/?ref=profile_bar
INTRODUCTION OF FIRE FIGHTING
FIRE FIGHTING NETWORK COMPONENTS
Manual Fire Fighting System
Standpipe System-Landing Valve(L.V) ,Fire Hose Cabinet(F.H.C).
Fire Hydrant(F.H).
Fire Department Connection(F.D.C).
Portable Fire Extinguishers.
Pipe Types& connecting of pipes.
Pipe Accessories, Supports & Valves.
Water Source & Pumping Station.
remove from plant critical systems steam piping prior to start-up:
Construction Debris
Scales
Rust
Loose Material
Construction Leftovers
Oil
Weld Spatter…etc.
Remove debris to meet equipment (Turbine) OEM criteria for accepting steam.
Failure to remove debris may cause damage to turbine blades, valve internals
Furnaces in Refinery and Petrochemicals
Process furnaces
Crude distillation unit
Reaction Heaters
Reformer Heater
Heater Performance objectives
Reasons to save Energy
Heater Types
Radiant section
Convection section
Crossover section
Burners
Severe Service Control & Isolation Valves in the Refining IndustryCTi Controltech
Mogas Industries manufactures a line of industrial ball valves specifically designed for the most demanding applications, including extremes of temperature, pressure, abrasive particulates, acidic products, heavy solids build-up, and large pressure differential. The Mogas valves are designed to provide sufficient levels of safety and performance where the results of failure can be catastrophic. Specialty modifications also provide noise reduction and velocity control. The presentation illustrates and explains the special features needed to accommodate the world's most demanding valve applications, as well as providing process schematics for numerous industrial applications that show how the valves are used.
FOR DOWNLOAD THIS GO THROUGH THIS BELOW LINK
https://ezazsidd1993.stores.instamojo.com/?ref=profile_bar
INTRODUCTION OF FIRE FIGHTING
FIRE FIGHTING NETWORK COMPONENTS
Manual Fire Fighting System
Standpipe System-Landing Valve(L.V) ,Fire Hose Cabinet(F.H.C).
Fire Hydrant(F.H).
Fire Department Connection(F.D.C).
Portable Fire Extinguishers.
Pipe Types& connecting of pipes.
Pipe Accessories, Supports & Valves.
Water Source & Pumping Station.
remove from plant critical systems steam piping prior to start-up:
Construction Debris
Scales
Rust
Loose Material
Construction Leftovers
Oil
Weld Spatter…etc.
Remove debris to meet equipment (Turbine) OEM criteria for accepting steam.
Failure to remove debris may cause damage to turbine blades, valve internals
Furnaces in Refinery and Petrochemicals
Process furnaces
Crude distillation unit
Reaction Heaters
Reformer Heater
Heater Performance objectives
Reasons to save Energy
Heater Types
Radiant section
Convection section
Crossover section
Burners
CPD Presentation: Smoke Ventilation using ShaftsColt UK
CPD Seminar - Smoke Ventilation Using Shafts
Shaft ventilation in residential and commercial buildings
Prescriptive staircase requirements for fire fighting and means of escape in residential buildings:
Ventilation of fire fighting stairs
Natural ventilation to BS 5588 Part 5
Natural shafts to BS 5588 Part 5
BRE Shafts to BS 5588 Part 5
Mechanical shafts as an alternative solution
Ventilation of common corridors in residential buildings:
Natural ventilation to ADB 2006
Natural Shafts to ADB 2006
Pressurisation/ mechanical ventilation
Extended travel distances in common corridors using mechanical shafts
This presentation by David Sylvester of the Mircom Group of Companies discusses CSA-B44 and NFPA 101 - the Canadian and American elevator recall codes. Learn how they relate to life safety and fire protection.
The most popular Thai magazine in the field of Mechanical, Electrical and Industrial Engineering. Technic Magazine is printed in Thailand and distributed throughout Thailand since 1984.
MORE INFORMATION: www.me.co.th
This Presentation is about the basic fundamentals one needs to know to begin Piping Engineering. All the basic formulas and questions that are usually asked in interviews are answered in this presentation. Feel free to ask any doubts in the comments and iI may try my best to answer them for you.
CPD Presentation: Smoke Ventilation using ShaftsColt UK
CPD Seminar - Smoke Ventilation Using Shafts
Shaft ventilation in residential and commercial buildings
Prescriptive staircase requirements for fire fighting and means of escape in residential buildings:
Ventilation of fire fighting stairs
Natural ventilation to BS 5588 Part 5
Natural shafts to BS 5588 Part 5
BRE Shafts to BS 5588 Part 5
Mechanical shafts as an alternative solution
Ventilation of common corridors in residential buildings:
Natural ventilation to ADB 2006
Natural Shafts to ADB 2006
Pressurisation/ mechanical ventilation
Extended travel distances in common corridors using mechanical shafts
This presentation by David Sylvester of the Mircom Group of Companies discusses CSA-B44 and NFPA 101 - the Canadian and American elevator recall codes. Learn how they relate to life safety and fire protection.
The most popular Thai magazine in the field of Mechanical, Electrical and Industrial Engineering. Technic Magazine is printed in Thailand and distributed throughout Thailand since 1984.
MORE INFORMATION: www.me.co.th
This Presentation is about the basic fundamentals one needs to know to begin Piping Engineering. All the basic formulas and questions that are usually asked in interviews are answered in this presentation. Feel free to ask any doubts in the comments and iI may try my best to answer them for you.
Bomba de Palheta Blackmer!
São bombas de deslocamento positivo e com compressores de gás e sem óleo, feitas para aplicações líquidas de CO2 que oferecem um desempenho de alto nível, sendo a eficiência energética, operação sem problemas e baixo custo de manutenção.
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
Callaghan Pump and controls Inc. is the authorized master distributor of Aurora Pumps for the New York metropolitan area. From small 7.5 hp inlines(pictured above) to 5000 gpm split case electric and diesel fire pumps, we can handle fire protection for any building.
Kammer valves are designed to handle a wide range of service conditions: pressures from vacuum to 4000 bar and temperatures from minus 269 degrees C to plus 400 degrees C. Body materials include all common stainless steels, in addition to plastics and exotic alloys.
This brochure illustrate M PUMPS production range for industrial applications. Metallic and non metallic pumps, from small dosing sliding vane pumps, to big overhung and between bearing heavy duty pumps. All these products are 100% made in M PUMPS.
The companies of Altra Industrial Motion offer many critical drivetrain products utilized in pump and compressor applications including couplings, backstops, torque-limiting devices, gearing and geared motors, clutches and belted drives
Flowserve Valves - Kammer Control ValvesSwanson Flo
FLOWSERVE Kämmer manufactures special application and general service control
valves and actuators, which are used extensively in the chemical, petrochemical, power, petroleum, pulp & paper, pharmaceutical, food processing and cryogenic industries.
FLOWSERVE Kämmer pneumatic actuators are widely known for their versatile diaphragm design, easy installation and simplified maintenance. When compared to other manufacturers’ diaphragm actuator designs, Kämmer actuators have much higher thrust capabilities, feature a very compact design and are lighter in weight. They also feature a field reversible design that requires no additional
parts.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 3
Fire pumps-rp-brochure-en
1. FIRE PUMPSHorizontal Fire Pumps / Vertical Fire Pumps / Pre-Packaged Fire Systems
N N O V A T I O N
E F F I C I E N C Y
Q U A L I T Y
®
2. Ruhrpumpen’s Fire Pumps are Listed by Underwriter’s
Laboratories and Approved by Factory Mutual. The complete
range includes Horizontal, Vertical Fire Pumps and complete
Pre-Packaged Fire Systems, in both 50 and 60 Hz. The pumps
are available in electric motor, diesel engine or steam turbine
driven configuration.
Ruhrpumpen’s Horizontal Split-Case, End suction and Vertical
In-Line centrifugal pumps combine the latest in hydraulic
design with almost a century of application experience to
meet today’s industrial and municipal requirements.
The Fire Pumps offer longer life, higher efficiencies, less
downtime and lower maintenance costs. Heavy fabricated-
steel bases, are available to mount the pump and driver.
Flexible shaft coupling connects driver to pump.
The VTP (Vertical Fire Pumps) are normally designed to operate
in wells, sumps or offshore. The bowl assembly consists
primarily of a suction bowl & suction bell, one or more bowls,
and a discharge head. The number of stages (bowls) required
is determined by the head requirements of the installation.
The pump bowl assembly is positioned in the sump or well at
a depth to provide the proper submergence. A pump shaft,
common to all moving parts in the bowl assembly, provides
mechanical linkage to the pump driver unit.
Ruhrpumpen also offers complete Pre-Packaged Fire Pump
Systems, which can vary from a pump with driver arrangement
on a skid, to a fully prefabricated unit with environmental
enclosures.
Vertical Fire Pumps
Pre-packaged Fire Pumps
For more than 60 years the name RuhrpumpenTM
has been synonymous worldwide
with innovation and reliability for pumping technology
Fire Pumps
Ruhrpumpen is an innovative and efficient centrifugal pump technology company that offers a wide range of quality products to our
clients. Ruhrpumpen is committed to global excellence with a complete range of Pumps, Fire Pump Packages and related products,
such as Decoking Systems and Tools to support the core markets, namely Oil & Gas, Petrochemical, Power, Heavy Industry
Applications, Mining and Water Services.
The broad product line complies with the most demanding quality specifications and goes beyond stringent industry standards such
as API, ANSI, Hydraulic Institute, Underwriter’s Laboratories, Factory Mutual and ISO 9001.
Ruhrpumpen is a vertically integrated company with its own foundry, machine shop, pump manufacturing plants and service centers.
With strategically located manufacturing plants, operating offices and service centers in many parts of the world, Ruhrpumpen is
truly a global pump company which also has the strength to focus on the local necessities of each client.
2
Horizontal Split Case
3. Percentofratedtotalhead
150
140
100
65
50
0
0 50 100 150 200
Percent of rated capacity
Shutoff Head capacity curve with
steepest shape permissible
“Flat” head capacity curve
Rated total head
Rated
capacity
• Pump shall furnish not less than 150% of rated capacity at not less than 65% of total rated head.
• Shutoff head will range from a minimum of 101 percent to a maximum of 140 percent of rated head.
• As per NFPA-20 we can offer ranges over 5,000 gpm, these cases are subject to individual review by the authority having
jurisdiction or a listing laboratory.
• As required by NFPA-20, each pump is tested at our factory to provide detailed performance data and to demonstrate its
compliance with the required specifications.
• In compliance with NFPA-20, hydrostatic tests are performed on the pump for a period of not less than 5 minutes. In the case of
vertical turbine pumps, both the discharge head and the bowl assembly are tested.
• The use of a Diesel Engine requires the proper environmental temperature (minimum 4.5°C / 40°F), to ensure correct operation
of the Fire System. A Pump House may be required in order to meet these specific conditions, please contact the factory for more
information.
Selection Criteria
FIRE PUMPS
Vertical Configuration with a Standard
Vertical Driver and a Flexible Coupling.
3
Fire Pumps
4. Single Stage Horizontal Split Case Pumps
COMPACT DESIGN
Heavy shaft and short bearing span reduce shaft
deflection to a minimum, providing longer
packing and bearing life and lower maintenance
costs, while requiring less floor space. Clockwise
rotation standard; counter-clockwise rotation
optional
• SHAFT SLEEVE
Protects the shaft against corrosion and wear,
extends through gland for maximum shaft
protection
• INTERCHANGEABLE
Radial and Thrust Bearings with grease
lubrication are (conservatively rated at 100,000
hrs “Plus” Bearing Life) guaranteed, maximum life
at minimum maintenance cost
• CASING
Upper and lower half bolted and dowelled to
provide perfect alignment. Bearing supports are
cast and bored integrally with lower-half casing.
Upper half casing can be removed for inspection,
without disturbing bearings or alignment.
Flanged suction and discharge connections are
located in the lower-half casing
• IMPELLER
Enclosed, double-suction. Cast in one-piece and
balanced to minimize thrust and to ensure longer
bearing life. Locked in position by threaded shaft
sleeves
• SHAFT
Larger-diameter, precision-machined, high
strength steel shaft for maximum strength with
minimum shaft deflection
• CASING WEAR RINGS
Close running clearance minimizes pressure
leakage between suction and discharge chambers
of the casing, maximizes efficiency and are easily
replaceable
• STUFFING BOX
Designed to accept a minimum of five rings of
packing with lantern ring. Internally drilled liquid
passage in upper-half casing provides lubrication
to the packing area
• NFPA - 20
• UL - 448
• FM - 1311
• Special design available on request
Capacity up to 1136 m3
/h 5,000 U.S. gpm
Head up to 204 m 670 ft
Pressure up to 20 bar 290 psig
Temperature 10° to 105 °C 50 ° to 220°F
Images for general arrangement use only, not certified for construction.
1 COMPACT DESIGN
4 CASING
5 IMPELLER
6 SHAFT
7 CASING WEAR RINGS
8 STUFFING BOX
3 INTERCHANGEABLE
2 SHAFT SLEEVE
Ruhrpumpen also designs offshore Fire Pump Systems with
ABS certification for floating offshore facilities.
Characteristics
DESCRIPTION
DESIGN FEATURES
HORIZONTAL SPLIT CASE PERFORMANCE DATA
Note: For pump operation outside this range, please contact a Ruhrpumpen representative.
4
Fire Pumps
Horizontal Split Case
5. End Suction Fire Fighting Pumps
• BEARING
Vibration monitoring ports standard
• FRAME
The heavy-duty power frame of the CPP
incorporates a design for additional oil cooling
and heat dissipation; bearing housing heat
exchanger is an available option
• SHAFT
A robust 316SS sleeved shaft as standard
for extended seal life
• UL/FM
Listed ANSI pumps will be supplied in FF. ANSI 150
# or 300 # flange drilling is available based on
material selection
• DISCHARGE
Vertical discharge on the center line
• CASING WEAR RING
Is standard for the certified ANSI pumps
Radially split casing with flanged connections
• SUCTION
Horizontal End Suction ANSI 150 # or 300 # flange
drilling is available based on material selection
• IMPELLER
Enclosed impeller design ensures maximum
efficiency. The impeller itself is threaded against
rotation and is positively locked onto shaft, and
sealed with an o-ring
• STUFFING BOX
Cover for packing
• SEAL
Standard Inpro/Seal® bearing isolators
• GREASE LUBRICATION
Is possible without adjustments on different parts.
• THE DOUBLE ROW THRUST BEARING
provides minimal shaft end play for extended
mechanical seal life
• NFPA - 20
• UL - 448
• FM - 1319
• The certified ANSI pumps are supplied in:
Ductile Iron / Stainless Steel (CF8M)
Capacity up to 114 m3
/h 500 U.S. gpm
Head up to 198 m 650 ft
Pressure up to 19 bar 280 psig
Temperature -45° to 315 °C -50 ° to 600°F
Images for general arrangement use only, not certified for construction.
Our End Suction Fire Pumps are designed according to ANSI
(ASME B73.1) and are Certified by Factory Mutual and UL.
Ruhrpumpen also designs offshore Fire Pump Systems with
ABS certification for floating offshore facilities. The End Suction
Pump is also available as Jockey a Pump.
1 BEARING
2 FRAME
8 IMPELLER
3 SHAFT
6 CASING
WEAR RING
9 STUFFING BOX
4 UL/FM Listed
ANSI Pumps
12 THE DOUBLE ROW
THRUST BEARING
11 GREASE
LUBRICATION
10 SEAL
5 DISCHARGE
7 SUCTION
Characteristics
DESCRIPTION
DESIGN FEATURES
MATERIALS OF CONSTRUCTION
END SUCTION PERFORMANCE DATA
Note: For pump operation outside this range, please contact a Ruhrpumpen representative.
5
Fire Pumps
End Suction
6. Note: For pump operation outside this range, please contact a Ruhrpumpen representative.
Vertical Turbine Pumps
• STUFFING BOX
Machined with bushing to guide shaft
• DISCHARGE HEAD
Provides support for motor and entire pump.
Available in cast iron or fabricated steel
• LINE SHAFT
Carbon steel and threaded with coupling. Other
materials available for various applications
• COLUMN CONNECTIONS
Flanged or threaded, and include replaceable
bearing retainer
• BEARINGS
Available in a variety of materials
• LINE SHAFT COUPLINGS
Machined from solid steel stock
• COLUMN ASSEMBLY
Manufactured in-plant to ensure accurate fit
Available in different materials and coatings
• SLEEVE BEARINGS
Operate in conjunction with pump shaft to
provide long life and low friction
• ENCLOSED IMPELLERS
Designed for long life and high efficiency.
Machined and balanced for vibration free
operation; the vanes and guide passages are
hand finished to improve the efficiency. Counter
clockwise rotation viewed from coupling end
• STANDARD TAPERED COLLETS
Secure impeller to pump shaft. Keyed impellers
available for some sizes
• SUCTION BOWL
Provides a rigid support of the lower end of the
pump shaft. Suction bell is available for special
applications
• STRAINER
Prevents entry of foreign objects into pump
suction
• NFPA - 20
• UL - 448
• FM - 1312
• Special design available on requestCapacity up to 1136 m3
/h 5,000 U.S. gpm
Head up to 202 m 663 ft
Pressure up to 19 bar 280 psig
Temperature 10° to 105 °C 50 ° to 220°F
Images for general arrangement use only, not certified for construction.
1 STUFFING BOX 2 DISCHARGE HEAD
4 COLUMN
CONNECTIONS
9 ENCLOSED
IMPELLERS
STRAINER
7 COLUMN
ASSEMBLY
8 SLEEVE
BEARINGS
12
SUCTION
BOWL
11
10 STANDARD
TAPERED
COLLETS
5 BEARINGS
3 LINE SHAFT
Ruhrpumpen can design an offshore Fire Pump System with
ABS certification for floating offshore facilities.
• Standard Material: Cast Iron / Bronze
Fitted. Special materials available on
request.
6 LINE SHAFT
COUPLINGS
Characteristics
DESCRIPTION
DESIGN FEATURES
MATERIALS OF CONSTRUCTION
VERTICAL TURBINE PUMP PERFORMANCE DATA
6
Fire Pumps
Vertical Turbine Pumps
7. Ruhrpumpen Vertical-In Line Pumps are also available for
Fire Fighting Applications. • Compact space saving design.
• Top pull-out simplifies maintenance.
• In-Line design ensures ease of installation.
Ruhrpumpen offers Pre-Packaged Fire Systems that can be designed and built to the requirements of the customer. These
Pre-Packaged systems can be supplied with an electric motor or diesel engine. As a customer you can choose prefabricated
skid mounted units or pump housed units. System designers appreciate the time savings and the Ruhrpumpen expertise built
into each project.
• Single source responsibility
• Prefabricated and Factory tested
• Reduced field cost installation
• Delivered to site in a single shipment
• International distribution and start up capabilities
• Compactness & Space Efficiency
• Completely wired.
• ETL/C-ETL Third Party Listing
• UL/FM approved components
• NFPA 20 full compliance
• NFPA 850 Compliant
• Certified ASME section IX welding, AWS D1.1 certified
structural welders.
In-Line Pumps
In-Line In-Line Skid
BENEFITS FROM USING IN-LINE PUMPS
Pre-Packaged Fire Systems
BENEFITS USING PRE-PACKAGED FIRE SYSTEMS
End Suction Pump on
Pre-Packaged Skid
Mining Market
7
Fire Pumps
Pre-Packaged Fire Systems
8. 1
16
2
3
4
5
6
7
8
UL-142 Double
Wall Day Tank
Floor Drain
System
UL Listed
Jockey Pump
Controllers
UL/FM
Fire Pump
FM Flow
Meter
Throttling
Valve
Electric
Motor
UL/FM Electric
Control Panel
Jockey
Pump
15
14
UL/FM Diesel
Control Panel
ASTM A36
Structural
Steel Skid
12 Schedule 8-CPVC
Containment Piping
for Fuel Piping
11 Copper
Sensing Lines
10 UL/FM Listed
OS&Y Gate Valves
9 Tamper
Switches
13 UL/FM Listed
Diesel Engine
Characteristics
8
Fire Pumps
Pre-Packaged Fire Systems
9. If your customer needs a packaged fire system to be completely housed, Ruhrpumpen can supply this enclosure. The Pump Houses
include the following (optional) features.
• Interior Lighting
• Exterior Flood Lighting
• Pre-wired and pre-piped
• Pre-piped sprinkler systems for pump house interior
• Exhaust Fan
• Mini Power Zone
• Electric Heaters with Built-in Thermostat
• Wall or Floor access for piping
• Containment piping
• Floor Drain
• Architectural finishes
• Safety Equipment
• Grating Floor Deck design
• Seismic Calculations with PE Stamps
• Open Skid design
• Diamond Plate Floor Deck design
• Ruhrpumpen can give start up and field training
• Leveling bolts optional
• High performance coating systems for corrosive or
costal environments
• Stainless steel sensing lines
• Stainless piping for salt or brackish water applications
• Mobile systems available
• Custom alarm panels available
Nothing is left to chance with a Ruhrpumpen Pre-Packaged Fire System
OPTIONAL FEATURES PRE-PACKAGED FIRE SYSTEMS
Mobile Pre-Packaged System
Option for PE Stamps
on all Drawings
Interior Pump House
Fire System
Pump House
Fire System
9
Fire Pumps
Pre-Packaged Fire Systems
10. Ruhrpumpen can offer Electric / Diesel and Jockey control
panels. Panels are available for configurations with one or
more drivers and the panels can be programmed for either
fully automatic or manual operation. The Electric / Diesel
Control Panels are UL/ULC listed and approved by Factory
Mutual and CSA, as well as meeting or exceeding the
requirements of NFPA 20 and NFPA 70.
Diesel control panels are available
for 12 volt (120, 220 / 240 VAC) or
24 volt (120, 220 VAC) diesel fire
pump engines.
Single or three phases Jockey Fire
Pump Panels designed for 50 & 60
Hz in a variety of voltages.
Configurations LV:
• Across the line
• Soft Start
• Delta open / closed
• Primary resistor
• Auto-transformer
• Part Winding
Configurations MV:
• Across the line
The Fire Pumps will be mounted on a rigid single piece standard baseplate or a heavy duty baseplate. A drip rim or extension for a
control panel can be added depending on customer requirements.
Panel Options
Baseplates
ELECTRIC PANELS
DIESEL PANELS JOCKEY PANELS
Heavy Duty
Baseplate
Standard
Baseplate
10
11. 11
Fire Pumps
Other Ruhrpumpen Products
Vertical Barrel Pump
Low NPSH “Shockless Entry” first
stage impeller (single or double
suction), Single or multi-stage.
Standard construction materials
according to API latest edition(type
VS6).
Condensate, Power plants, Municipal,
Hydrocarbons, Pipeline, and
Refineries.
Volute Casing Centrifugal
Pump
Axially split, horizontal single or
two stage, double volute casing,
double suction, closed impeller.
Heavy duty process design
according to API 610 latest edition
(type BB1).
Pipeline Service-Mainline and
Booster, Oil Extraction, Refinery,
Chemical, Petrochemical,
Metallurgical Industry, and Power
Stations.
Vertical Turbine Pump
Multistage vertical centrifugal pump
with diffuser type bowl, semi-open /
enclosed impellers, cast iron bowls,
counterclockwise rotation viewed
from coupling end.
Deep Well, Irrigation,
Cooling Tower, Sump,
and Condensate Pumps.
Sump Pump
Single Stage single suction vertical
centrifugal pump, volute type case,
flanged and threaded discharge,
cast iron casing, flexible coupling.
Sump Drainage, Flood Control,
Air Wash Systems, Power Plants,
Chemical Industry, Municipal
Systems, Water Treatment, Process
Plants, and Sewage Lift Stations.
12. More Information:
August.15
USA, Tulsa & Orland
MEXICO, Monterrey
BRAZIL, Rio De Janeiro
ARGENTINA, Buenos Aires
GERMANY, Witten
EGYPT, Suez
INDIA, Chennai
CHINA, Changzhou
UK, Lancing