Fire Alarm System Project
•Download as PPTX, PDF•
0 likes•2,428 views
This project designs a fire alarm system using an Arduino board connected to temperature and gas sensors, along with a piezo buzzer, LED, and resistors, to detect fires. The system is simulated using TinkerCad and detects fires by changes in temperature and gas levels, signaling alarms with the buzzer and LED.
Report
Share
Report
Share
Recommended
Fire detection system using arduino
Here you will find details about how you can make a fire detection system by using arduino and flame sensor. We have also added the budget you need to make this project.
Burglar alarm ppt
This document summarizes a project on creating a burglar alarm circuit using common electronic components. The objective is to ensure security of property using a device that monitors for burglary attempts using a light dependent resistor, variable resistor, LED, IC 555 timer chip, and 9V battery connected on a breadboard. Diagrams of the circuit and its working principle are provided, along with components used and conclusions about home security being an important growing field with technological advances improving efficiency of alarms over time.
fire detection system
this system will automatically detects the fire and prevent that by using water sprinkler to spray water on it.
Implementation Of GSM Based Fire Alarm and Protection System
This document outlines a project to design and implement a GSM-based fire alarm and protection system. It includes an introduction, objectives, block diagram, flowchart, schematic, required instruments, hardware layout, working principle, applications, benefits, limitations, and future work scope. The system uses an Arduino Nano, GSM module, smoke sensor, LCD display, buzzer, and motor to detect smoke, send SMS alerts to notify users, and activate protective measures in the event of a fire. The goal is to create an affordable, remote monitoring solution to enhance safety and minimize fire damage.
FIRE ALARM SYSTEM PPT.pptx
This document describes building an IoT-based fire alarm system using a NodeMCU ESP8266 and Blynk. The system uses a flame sensor to detect fire and smoke and connects to a buzzer and LED for alerts. When the flame sensor detects fire, it triggers the buzzer and turns on the LED. The system is also connected to Blynk to send notifications. Code is written and uploaded to the NodeMCU to define pins for the sensors, buzzer and LED. When the flame sensor detects fire, it sets the LED and buzzer to alert people and notifies users through Blynk.
Home automation ppt
This document presents a home automation system using Node MCU. It proposes using Node MCU to control electrical appliances like fans, lights and doors via a smartphone app. The system would allow control of devices from a long distance. It discusses related work on home automation with Node MCU. The proposed work would allow energy savings and home security through remote control and monitoring. A block diagram shows the system components including Node MCU, relay drivers, appliances, and a smartphone app. The methodology describes programming Node MCU to control relays and devices. Testing showed the system can automate home appliances through remote smartphone control.
Laser light security system
This document describes a laser light security system that uses a laser beam, light dependent resistor (LDR), transistor, LED, and buzzer. When the laser beam is interrupted, the resistance of the LDR changes and triggers the transistor to activate the LED and buzzer, alerting of an intrusion. The system provides effective perimeter security for homes inside and out in a discreet and easy to install way. Advancements in technology continue to improve home security systems.
Voice Control Home Automation
It's a brief description about Voice Control Home Automation. In this we explained properly what is home automation and how it works.
Recommended
Fire detection system using arduino
Here you will find details about how you can make a fire detection system by using arduino and flame sensor. We have also added the budget you need to make this project.
Burglar alarm ppt
This document summarizes a project on creating a burglar alarm circuit using common electronic components. The objective is to ensure security of property using a device that monitors for burglary attempts using a light dependent resistor, variable resistor, LED, IC 555 timer chip, and 9V battery connected on a breadboard. Diagrams of the circuit and its working principle are provided, along with components used and conclusions about home security being an important growing field with technological advances improving efficiency of alarms over time.
fire detection system
this system will automatically detects the fire and prevent that by using water sprinkler to spray water on it.
Implementation Of GSM Based Fire Alarm and Protection System
This document outlines a project to design and implement a GSM-based fire alarm and protection system. It includes an introduction, objectives, block diagram, flowchart, schematic, required instruments, hardware layout, working principle, applications, benefits, limitations, and future work scope. The system uses an Arduino Nano, GSM module, smoke sensor, LCD display, buzzer, and motor to detect smoke, send SMS alerts to notify users, and activate protective measures in the event of a fire. The goal is to create an affordable, remote monitoring solution to enhance safety and minimize fire damage.
FIRE ALARM SYSTEM PPT.pptx
This document describes building an IoT-based fire alarm system using a NodeMCU ESP8266 and Blynk. The system uses a flame sensor to detect fire and smoke and connects to a buzzer and LED for alerts. When the flame sensor detects fire, it triggers the buzzer and turns on the LED. The system is also connected to Blynk to send notifications. Code is written and uploaded to the NodeMCU to define pins for the sensors, buzzer and LED. When the flame sensor detects fire, it sets the LED and buzzer to alert people and notifies users through Blynk.
Home automation ppt
This document presents a home automation system using Node MCU. It proposes using Node MCU to control electrical appliances like fans, lights and doors via a smartphone app. The system would allow control of devices from a long distance. It discusses related work on home automation with Node MCU. The proposed work would allow energy savings and home security through remote control and monitoring. A block diagram shows the system components including Node MCU, relay drivers, appliances, and a smartphone app. The methodology describes programming Node MCU to control relays and devices. Testing showed the system can automate home appliances through remote smartphone control.
Laser light security system
This document describes a laser light security system that uses a laser beam, light dependent resistor (LDR), transistor, LED, and buzzer. When the laser beam is interrupted, the resistance of the LDR changes and triggers the transistor to activate the LED and buzzer, alerting of an intrusion. The system provides effective perimeter security for homes inside and out in a discreet and easy to install way. Advancements in technology continue to improve home security systems.
Voice Control Home Automation
It's a brief description about Voice Control Home Automation. In this we explained properly what is home automation and how it works.
IOT: Home Automation using Android Application
Mobile devices are ideal in providing a user interface, they are portable and their wide range of capabilities. They can communicate with the Home automation network through an internet gateway, and also it can also directly, as these devices usually implement low power communication protocols, such as Wi-Fi.
IoT Based Fire Alarm and Monitoring System
This paper has proposed an internet of things (IoT) based fire alarm and monitoring system best suited for industrial and
home applications.
Wireless Electronic Notice Board
This document contains multiple project reports for a wireless electronic notice board developed by students at the Government Polytechnic College in Neyyattinkara, India. The notice board allows text messages to be sent via GSM from any location and displayed on the board. It uses an ATmega32 microcontroller interfaced with a GSM module, LCD display, power supply and other components. The system validates incoming SMS messages and displays them. The reports describe the design, circuit diagrams, programming, and working of the notice board system.
Arduino based Home Automation System with Android
This document describes an Arduino-based home automation system using Android and Bluetooth. The system allows controlling electrical devices like lights and appliances remotely using an Android app over Bluetooth. It uses an Arduino Uno microcontroller, Bluetooth module, sensors, relays and can automate functions like security and energy efficiency. The Android app is developed using MIT App Inventor and the Arduino code integrates the different components to enable remote home automation.
Temperature based fan speed control & monitoring using
Our object of making this project is for reducing the power consumption. And also to assist people who are disabled and are unable to control the speed of fan.
Home Automation Using Arduino Uno and HC-05
Controlling the DC motor (as fan) and Light bulb through HC-05 bluetooth module using the bluetooth terminal app from available on play store. The report attached herewith have a detailed description of the Circuit and the code. Interested ones can do further editings also:)
Home Appliances Controlling using Android Mobile via Bluetooth
This project allows control of electrical appliances using an Android device. An Android application is installed to send commands via Bluetooth to a microcontroller. The microcontroller then controls relays connected to appliances like lights and fans, allowing remote switching on/off. This provides assistance for elderly and disabled people by making appliances controllable from a smartphone.
Home automation using android mobiles
This document discusses home automation through an Android mobile device. It describes a system where a Bluetooth module and relays are used to allow an Android phone to remotely control home appliances. The phone acts as the host controller, communicating with client modules attached to devices via Bluetooth. The system allows users to control lights, temperature and other electronics from their mobile device.
Temperature based-fan-controller
This document describes an automatic temperature-controlled fan project using an Arduino Uno microcontroller. The fan will automatically turn on when the temperature reaches 35°C as measured by a temperature sensor, and will turn off again when the temperature drops below 35°C, in order to regulate the environment and reduce energy consumption. The system includes an Arduino, temperature sensor, LCD display, DC motor fan, battery power source, and connecting wires. Potential applications include use in homes and industries to assist people and save electricity by automating fan control based on temperature changes.
Iot based fire department alerting system
Leading project maker in Nashik, Electrical project in nashik goelectromeh.in, Electronic project in nashik goelectromeh.in, computer project in nashik, Electrical project engineering project in nashik goelectromeh.in, Electronic project engineering project in nashik goelectromeh.in, Computer project engineering project in nashik goelectromeh.in,
Electrical project Diploma project in nashik goelectromeh.in, Electronic project Diploma project in nashik goelectromeh.in, Computer project Diploma project in nashik goelectromeh.in.
Gsm based fire alert system
This document describes a GSM based fire alert system that uses an ATmega8 microcontroller along with an MQ2 smoke sensor, LM35 temperature sensor, and GSM module. The system is designed to detect fires and send alerts via GSM. It includes introductions to the components, working block diagram, circuit diagram, PCB layout, and applications for remote fire detection in locations with limited human interaction. Future work proposed includes using GPS instead of GSM for location tracking and integrating an Android app for notifications.
Project Report on Smart Dustbin
This is a project report on Smart Dustbin Using IOT Prepared By Lakshya Pandey, Second Year Electrical Engineering Student of Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
All Rights Reserved.
Timing Diagram of MVI Instruction of 8085 Microprocessor
This Presentation helps to study and learn about the Timing diagram of MVI instruction of 8085 Microprocessor.
home automaton using pc ppt
This document describes a home automation project that allows controlling home appliances like a TV, refrigerator, and lights using a personal computer. A PC is interfaced with a microcontroller via an RS232 cable. The microcontroller is connected to relays that switch appliances on and off. Home automation provides network connectivity between computers, appliances, and subsystems like HVAC and security. The project allows remote control and monitoring of appliances for convenience and energy savings.
Report on arduino
Arduino is an open-source hardware and software platform for building electronic projects and interactive objects. It consists of a circuit board with a microcontroller, and an IDE software to write and upload code. The boards can read inputs from sensors and turn them into outputs that control actuators. Arduino provides a standard format that simplifies use of microcontrollers. It allows controlling the board by sending instructions to the microcontroller via the Arduino IDE. The platform works with both the physical board and its libraries and IDE software.
Bluetooth based home automation using arduino presentaton
This presentation outlines a Bluetooth-based home automation system using an Arduino Uno board. The system allows remote control of home appliances via an Android application. It uses an Arduino Uno microcontroller, HC-05 Bluetooth module, relays, and a relay driver. An Android app sends control signals over Bluetooth to the Arduino, which activates the relays to power devices. The presentation describes the hardware components, software, block diagram, advantages like remote monitoring, and a cost analysis. It aims to develop a low-cost home automation solution with remote control capabilities.
Laser Security System
This document describes the design and components of a laser-based security alarm system. The system uses a laser beam to create an invisible boundary around an area being protected. If an intruder breaks the laser beam, a buzzer will sound the alarm. The system is inexpensive yet effective for protecting buildings and areas from intruders. It uses a laser transmitter, receiver, resistor, transistor, breadboard, batteries, and buzzer.
Arduino
The document discusses the Arduino, an open-source electronics prototyping platform. It provides a brief history of how Arduino was created in 2005 to provide an affordable platform for interactive design projects. It describes the key features of the Arduino Uno board and the Arduino programming environment. Finally, it outlines some common applications of Arduino in fields like home automation, robotics, and sensor prototyping.
SMART HOME AUTOMATION USING MOBILE APPLICATION
This document outlines a smart home automation project using a mobile application to control home appliances via an Arduino board and Bluetooth module. The objectives are to understand smart home concepts, establish serial communication between Arduino and a mobile device, and design a user interface. The system allows controlling AC loads from an Android phone app through an Arduino, Bluetooth module, relays, and relay driver IC. A block diagram and flowchart illustrate the components and process. An App Inventor mobile app is created to provide the human-machine interface.
Wi-Fi Esp8266 nodemcu
The NodeMCU is an open-source IoT development kit that allows users to prototype IoT products using a few lines of Lua script. It contains an ESP8266 WiFi SoC, programmable GPIO pins, 32KB RAM, 80KB DRAM, and 200KB flash memory. The NodeMCU can be programmed via C or Lua and connect to devices via WiFi or by connecting pins to sensors and actuators. It provides a low-cost way to build an interactive and programmable smart device with WiFi connectivity.
Animation in Computer Graphics
Animation is a method of creating the illusion of movement by photographing sequential drawings, models, or puppets in fast succession. Our eyes can only retain an image for 1/10 of a second, so when multiple images appear quickly, our brain blends them into a single moving image. Traditionally, animators drew pictures on transparent sheets that were then photographed, but today most animation uses computer-generated imagery. Common types of animation include traditional cel animation, 2D vector animation, 3D animation using computer models, and stop motion animation that adjusts physical objects frame by frame. Popular software used for animation includes Blender, 3D Studio Max, and Adobe Animate.
Simulation
Simulation provides several key advantages: it allows investigation of dangerous or critical situations without risk of harm, allows conditions to be varied to understand outcomes, and can speed up or slow down processes to study changes over various time periods. However, simulations also have disadvantages: they can be expensive to develop and conduct, results sometimes require extensive interpretation, and simulations may not perfectly model all factors or produce entirely accurate outcomes. Simulation is applied in many areas including manufacturing, construction, the military, transportation, education, healthcare, and analyzing business and network processes.
More Related Content
What's hot
IOT: Home Automation using Android Application
Mobile devices are ideal in providing a user interface, they are portable and their wide range of capabilities. They can communicate with the Home automation network through an internet gateway, and also it can also directly, as these devices usually implement low power communication protocols, such as Wi-Fi.
IoT Based Fire Alarm and Monitoring System
This paper has proposed an internet of things (IoT) based fire alarm and monitoring system best suited for industrial and
home applications.
Wireless Electronic Notice Board
This document contains multiple project reports for a wireless electronic notice board developed by students at the Government Polytechnic College in Neyyattinkara, India. The notice board allows text messages to be sent via GSM from any location and displayed on the board. It uses an ATmega32 microcontroller interfaced with a GSM module, LCD display, power supply and other components. The system validates incoming SMS messages and displays them. The reports describe the design, circuit diagrams, programming, and working of the notice board system.
Arduino based Home Automation System with Android
This document describes an Arduino-based home automation system using Android and Bluetooth. The system allows controlling electrical devices like lights and appliances remotely using an Android app over Bluetooth. It uses an Arduino Uno microcontroller, Bluetooth module, sensors, relays and can automate functions like security and energy efficiency. The Android app is developed using MIT App Inventor and the Arduino code integrates the different components to enable remote home automation.
Temperature based fan speed control & monitoring using
Our object of making this project is for reducing the power consumption. And also to assist people who are disabled and are unable to control the speed of fan.
Home Automation Using Arduino Uno and HC-05
Controlling the DC motor (as fan) and Light bulb through HC-05 bluetooth module using the bluetooth terminal app from available on play store. The report attached herewith have a detailed description of the Circuit and the code. Interested ones can do further editings also:)
Home Appliances Controlling using Android Mobile via Bluetooth
This project allows control of electrical appliances using an Android device. An Android application is installed to send commands via Bluetooth to a microcontroller. The microcontroller then controls relays connected to appliances like lights and fans, allowing remote switching on/off. This provides assistance for elderly and disabled people by making appliances controllable from a smartphone.
Home automation using android mobiles
This document discusses home automation through an Android mobile device. It describes a system where a Bluetooth module and relays are used to allow an Android phone to remotely control home appliances. The phone acts as the host controller, communicating with client modules attached to devices via Bluetooth. The system allows users to control lights, temperature and other electronics from their mobile device.
Temperature based-fan-controller
This document describes an automatic temperature-controlled fan project using an Arduino Uno microcontroller. The fan will automatically turn on when the temperature reaches 35°C as measured by a temperature sensor, and will turn off again when the temperature drops below 35°C, in order to regulate the environment and reduce energy consumption. The system includes an Arduino, temperature sensor, LCD display, DC motor fan, battery power source, and connecting wires. Potential applications include use in homes and industries to assist people and save electricity by automating fan control based on temperature changes.
Iot based fire department alerting system
Leading project maker in Nashik, Electrical project in nashik goelectromeh.in, Electronic project in nashik goelectromeh.in, computer project in nashik, Electrical project engineering project in nashik goelectromeh.in, Electronic project engineering project in nashik goelectromeh.in, Computer project engineering project in nashik goelectromeh.in,
Electrical project Diploma project in nashik goelectromeh.in, Electronic project Diploma project in nashik goelectromeh.in, Computer project Diploma project in nashik goelectromeh.in.
Gsm based fire alert system
This document describes a GSM based fire alert system that uses an ATmega8 microcontroller along with an MQ2 smoke sensor, LM35 temperature sensor, and GSM module. The system is designed to detect fires and send alerts via GSM. It includes introductions to the components, working block diagram, circuit diagram, PCB layout, and applications for remote fire detection in locations with limited human interaction. Future work proposed includes using GPS instead of GSM for location tracking and integrating an Android app for notifications.
Project Report on Smart Dustbin
This is a project report on Smart Dustbin Using IOT Prepared By Lakshya Pandey, Second Year Electrical Engineering Student of Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
All Rights Reserved.
Timing Diagram of MVI Instruction of 8085 Microprocessor
This Presentation helps to study and learn about the Timing diagram of MVI instruction of 8085 Microprocessor.
home automaton using pc ppt
This document describes a home automation project that allows controlling home appliances like a TV, refrigerator, and lights using a personal computer. A PC is interfaced with a microcontroller via an RS232 cable. The microcontroller is connected to relays that switch appliances on and off. Home automation provides network connectivity between computers, appliances, and subsystems like HVAC and security. The project allows remote control and monitoring of appliances for convenience and energy savings.
Report on arduino
Arduino is an open-source hardware and software platform for building electronic projects and interactive objects. It consists of a circuit board with a microcontroller, and an IDE software to write and upload code. The boards can read inputs from sensors and turn them into outputs that control actuators. Arduino provides a standard format that simplifies use of microcontrollers. It allows controlling the board by sending instructions to the microcontroller via the Arduino IDE. The platform works with both the physical board and its libraries and IDE software.
Bluetooth based home automation using arduino presentaton
This presentation outlines a Bluetooth-based home automation system using an Arduino Uno board. The system allows remote control of home appliances via an Android application. It uses an Arduino Uno microcontroller, HC-05 Bluetooth module, relays, and a relay driver. An Android app sends control signals over Bluetooth to the Arduino, which activates the relays to power devices. The presentation describes the hardware components, software, block diagram, advantages like remote monitoring, and a cost analysis. It aims to develop a low-cost home automation solution with remote control capabilities.
Laser Security System
This document describes the design and components of a laser-based security alarm system. The system uses a laser beam to create an invisible boundary around an area being protected. If an intruder breaks the laser beam, a buzzer will sound the alarm. The system is inexpensive yet effective for protecting buildings and areas from intruders. It uses a laser transmitter, receiver, resistor, transistor, breadboard, batteries, and buzzer.
Arduino
The document discusses the Arduino, an open-source electronics prototyping platform. It provides a brief history of how Arduino was created in 2005 to provide an affordable platform for interactive design projects. It describes the key features of the Arduino Uno board and the Arduino programming environment. Finally, it outlines some common applications of Arduino in fields like home automation, robotics, and sensor prototyping.
SMART HOME AUTOMATION USING MOBILE APPLICATION
This document outlines a smart home automation project using a mobile application to control home appliances via an Arduino board and Bluetooth module. The objectives are to understand smart home concepts, establish serial communication between Arduino and a mobile device, and design a user interface. The system allows controlling AC loads from an Android phone app through an Arduino, Bluetooth module, relays, and relay driver IC. A block diagram and flowchart illustrate the components and process. An App Inventor mobile app is created to provide the human-machine interface.
Wi-Fi Esp8266 nodemcu
The NodeMCU is an open-source IoT development kit that allows users to prototype IoT products using a few lines of Lua script. It contains an ESP8266 WiFi SoC, programmable GPIO pins, 32KB RAM, 80KB DRAM, and 200KB flash memory. The NodeMCU can be programmed via C or Lua and connect to devices via WiFi or by connecting pins to sensors and actuators. It provides a low-cost way to build an interactive and programmable smart device with WiFi connectivity.
What's hot (20)
Temperature based fan speed control & monitoring using
Temperature based fan speed control & monitoring using
Home Appliances Controlling using Android Mobile via Bluetooth
Home Appliances Controlling using Android Mobile via Bluetooth
Timing Diagram of MVI Instruction of 8085 Microprocessor
Timing Diagram of MVI Instruction of 8085 Microprocessor
Bluetooth based home automation using arduino presentaton
Bluetooth based home automation using arduino presentaton
More from RinkuNahar
Animation in Computer Graphics
Animation is a method of creating the illusion of movement by photographing sequential drawings, models, or puppets in fast succession. Our eyes can only retain an image for 1/10 of a second, so when multiple images appear quickly, our brain blends them into a single moving image. Traditionally, animators drew pictures on transparent sheets that were then photographed, but today most animation uses computer-generated imagery. Common types of animation include traditional cel animation, 2D vector animation, 3D animation using computer models, and stop motion animation that adjusts physical objects frame by frame. Popular software used for animation includes Blender, 3D Studio Max, and Adobe Animate.
Simulation
Simulation provides several key advantages: it allows investigation of dangerous or critical situations without risk of harm, allows conditions to be varied to understand outcomes, and can speed up or slow down processes to study changes over various time periods. However, simulations also have disadvantages: they can be expensive to develop and conduct, results sometimes require extensive interpretation, and simulations may not perfectly model all factors or produce entirely accurate outcomes. Simulation is applied in many areas including manufacturing, construction, the military, transportation, education, healthcare, and analyzing business and network processes.
Software
The document proposes building an Android-based local train ticketing system that allows users to register accounts and book tickets from their Android devices when within WiFi range of a server at a train station. The system calculates fares based on station distance and deducts the amount from the user's account. It aims to provide a convenient, time-saving, and environmentally friendly ticketing option with features ensuring security, accuracy, reliability, and feasibility. Design documents include use case diagrams, activity diagrams, class diagrams, and UI designs for the proposed system. The outcome would allow users to reserve and cancel seats, view station and train information, and search for trains between locations.
Dbms
The document discusses concepts related to database normalization including the different normal forms, functional dependencies, keys, and other database design concepts. It provides examples to illustrate normalization steps from 1st normal form to 3rd normal form and different types of functional dependencies including full, partial, and transitive dependencies. The document also covers data definition language, data manipulation language, and database design techniques such as generalization and specialization.
Computer network
IPv4 addresses are 32-bit numbers that uniquely identify devices connected to the internet. The total address space consists of over 4 billion possible addresses. Addresses are divided into classes based on the bits in the first octet, with classes A, B, and C used for general IP addressing and classes D and E reserved for other uses. Subnetting allows a single class A or B address to be divided into multiple subnets to create more networks, while supernetting combines multiple class C addresses into a larger supernetwork to create a mid-sized block of addresses.
Eco
Imports are purchases of goods and services from foreign countries. Bangladesh imports goods that are cheaper or not available domestically, as well as essential goods. Key import documentation includes invoices, bills of lading, and certificates of origin. Bangladesh's top imports are machinery, cotton, fuel, electrical equipment, iron, plastics, vehicles, and textiles. The customs clearance process involves submitting import documentation and paying duties and taxes to release goods.
Accounting
The document describes accounting transactions made by WorldByte, a business owned by Rinku Nahar Hossan, during the month of June 2018. It includes 13 transactions ranging from investing cash to paying expenses. Key financial statements are presented: the income statement shows a net income of $3,950, the owner's equity statement tracks contributions and drawings, and the balance sheet balances at $23,300 in assets equal to liabilities and owner's equity.
More from RinkuNahar (7)
Recently uploaded
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaLiterature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Fire Alarm System Project
- 1. Fire Alarm System In this project, I have designed a Fire Alarm circuit using a few electrical components like Temperature and Gas sensors using TinkerCad and interface it with Arduino.
- 2. Hardware Requirements 1. Arduino UNO Board: 3. Piezo Buzzer : 2. LM-35 Temperature Sensor: 4. Jumper Wires :
- 3. 5. Gas sensor : 7. Breadboard: 6. Resistors : 8. LED:
- 4. Software Requirements TinkerCad circuit simulation :
- 6. Code
- 7. Output