The document provides installation instructions for the Accent-I interior accent package for Tesla Model S vehicles. It describes the Accent-I pieces included and recommends either semi-permanent or permanent installation. Semi-permanent installation allows for easier removal of pieces in the future while permanent provides stronger adhesion but makes removal more difficult. Detailed instructions are provided for cleaning, aligning, and adhering each Accent-I piece incrementally to avoid misalignment or damage during installation.
The document provides installation instructions for the RCCI, an aftermarket accessory designed to fit at the center of the rear bench seat in a Tesla Model S. The instructions outline a 7 step process for installing the RCCI using a simple tool made from a wire clothes hanger. Key steps include using the tool to pull a strap through the seat from the trunk to the rear seats, then attaching the strap to the RCCI and an anchoring bar in the seat back. Adjusting the front strap ensures the RCCI is securely in place. Removal simply reverses these steps. Photos supplement the instructions.
The document provides installation instructions for installing the RCCI rear center console in a Tesla Model S. It describes using a wire clothes hanger tool to pull a strap through the rear seat to attach the RCCI to an anchor bar accessible from the trunk. It then connects the front of the RCCI to the lower front edge of the rear seat with a strap and hook. Removal is the reverse process of undoing the straps. It also provides notes about matching wood veneers and ensuring the rear strap is securely attached for safety.
This document provides installation instructions for installing a 2" or 1.25" EcoHitch on a 2012-2016 Tesla Model S. The installation involves removing underbody panels, bumper fascia, and other components to access attachment points for the hitch. Detailed steps and diagrams are provided to guide removal and installation of over 20 components. Safety is emphasized throughout and it is recommended to have the installation performed by a professional.
This document provides step-by-step instructions for installing a Tesla dashcam, specifically a BlackVue DR650GW-2CH HD camera. It outlines gaining access to areas of the vehicle to route wires, running the camera power cable and rear camera cable through the headliner and footwell, and mounting the front camera below the rearview mirror. The installation takes approximately 4 hours and requires removing various plastic panels, using tools like a wire snake to push cables through tight spaces in the headliner, and cleanly managing the wires.
This document provides installation instructions for a Glove Box Bumper product for Tesla Model S and Model X vehicles. It lists the necessary tools, which is just a tape measure or ruler. The instructions then describe a 3 step process for positioning and adhering the bumper to the inside of the glove box door using double-sided tape. The bumper is intended to improve storage efficiency in the glove box.
This document provides installation instructions for Window Control Covers for Tesla Model S and Model X vehicles. It begins with a disclaimer that the manufacturer is not responsible for any vehicle damage during installation or use of the product. It then lists the quick start installation steps, which include removing adhesive covers, adding extra adhesive strips to some pieces, positioning the covers and pressing them into place. It notes that the covers are intended for permanent installation but can be removed by prying, though the adhesive will be weakened and may not re-adhere properly.
This document provides installation instructions for the Kangaroo, a storage accessory made by EVannex for the Tesla Model S. It attaches to the back of the front seats through drilling small holes and uses screws and plastic frames. The instructions describe where to position and drill holes in 10 steps for mounting the right and left frames to the seat backs and lower base support to the elastic band at the bottom. Cautions are given about drilling depth and not drilling through the elastic band. Tools required include a 3/32" drill bit, electric drill, screwdriver and blue tape.
The document provides installation instructions for a Front Air Dam Protection Kit for Tesla Model S and Model X vehicles. It advises cleaning and preparing the front air dam surface before installation. Key steps include peeling back the red protective film gradually as the protection strip is applied and pressed firmly into place using a hair dryer. Allow 24 hours for adhesive to cure before using the protection kit. The kit is designed to protect the front air dam from scratches but is not warranted against damage or detachment from low speed impacts.
The document provides installation instructions for the RCCI, an aftermarket accessory designed to fit at the center of the rear bench seat in a Tesla Model S. The instructions outline a 7 step process for installing the RCCI using a simple tool made from a wire clothes hanger. Key steps include using the tool to pull a strap through the seat from the trunk to the rear seats, then attaching the strap to the RCCI and an anchoring bar in the seat back. Adjusting the front strap ensures the RCCI is securely in place. Removal simply reverses these steps. Photos supplement the instructions.
The document provides installation instructions for installing the RCCI rear center console in a Tesla Model S. It describes using a wire clothes hanger tool to pull a strap through the rear seat to attach the RCCI to an anchor bar accessible from the trunk. It then connects the front of the RCCI to the lower front edge of the rear seat with a strap and hook. Removal is the reverse process of undoing the straps. It also provides notes about matching wood veneers and ensuring the rear strap is securely attached for safety.
This document provides installation instructions for installing a 2" or 1.25" EcoHitch on a 2012-2016 Tesla Model S. The installation involves removing underbody panels, bumper fascia, and other components to access attachment points for the hitch. Detailed steps and diagrams are provided to guide removal and installation of over 20 components. Safety is emphasized throughout and it is recommended to have the installation performed by a professional.
This document provides step-by-step instructions for installing a Tesla dashcam, specifically a BlackVue DR650GW-2CH HD camera. It outlines gaining access to areas of the vehicle to route wires, running the camera power cable and rear camera cable through the headliner and footwell, and mounting the front camera below the rearview mirror. The installation takes approximately 4 hours and requires removing various plastic panels, using tools like a wire snake to push cables through tight spaces in the headliner, and cleanly managing the wires.
This document provides installation instructions for a Glove Box Bumper product for Tesla Model S and Model X vehicles. It lists the necessary tools, which is just a tape measure or ruler. The instructions then describe a 3 step process for positioning and adhering the bumper to the inside of the glove box door using double-sided tape. The bumper is intended to improve storage efficiency in the glove box.
This document provides installation instructions for Window Control Covers for Tesla Model S and Model X vehicles. It begins with a disclaimer that the manufacturer is not responsible for any vehicle damage during installation or use of the product. It then lists the quick start installation steps, which include removing adhesive covers, adding extra adhesive strips to some pieces, positioning the covers and pressing them into place. It notes that the covers are intended for permanent installation but can be removed by prying, though the adhesive will be weakened and may not re-adhere properly.
This document provides installation instructions for the Kangaroo, a storage accessory made by EVannex for the Tesla Model S. It attaches to the back of the front seats through drilling small holes and uses screws and plastic frames. The instructions describe where to position and drill holes in 10 steps for mounting the right and left frames to the seat backs and lower base support to the elastic band at the bottom. Cautions are given about drilling depth and not drilling through the elastic band. Tools required include a 3/32" drill bit, electric drill, screwdriver and blue tape.
The document provides installation instructions for a Front Air Dam Protection Kit for Tesla Model S and Model X vehicles. It advises cleaning and preparing the front air dam surface before installation. Key steps include peeling back the red protective film gradually as the protection strip is applied and pressed firmly into place using a hair dryer. Allow 24 hours for adhesive to cure before using the protection kit. The kit is designed to protect the front air dam from scratches but is not warranted against damage or detachment from low speed impacts.
The document provides an overview and installation guide for an LED lighting upgrade kit for a Tesla Model X. It details the locations of the 11 rectangular white LED lights and 2 red lights in the vehicle. The summary describes:
- The LED lights are located in the frunk, front dash/footwells, underneath the front seats, on the front doors as puddle lights, in the trunk, and inside the glove box.
- Installing the lights ranges from easy to difficult, with the frunk lights and those under the front seats being the easiest, while the trunk light is the most challenging due to its tight fit.
- The upgraded LED lights provide much brighter illumination than the factory lights,
The document provides installation instructions for installing a Gen II lighted rear appliqué on a Tesla Model S. It includes a parts list and describes removing the existing appliqué and trim pieces. The key steps are to 1) remove the existing appliqué and clean off residue, 2) modify the black plastic mounting bracket and install the new appliqué, 3) locate wire connections for 12V, ground, reverse, brake, turn signals, etc. in the liftgate and trunk and tap them with connectors, 4) run wiring to the Bluetooth controller module mounted in the left tailgate handle area and connect the wires, and 5) reinstall the trim pieces and test the appliqué functions. Proper
The document provides installation instructions for a Cubby Compartment accessory for Tesla Model S and Model X vehicles. It describes a 4 step installation process that requires no tools and uses magnets to securely attach the compartment in the vehicle's cubby. It notes there may be minor variations between vehicle cubbies that could impact fitting and provides tips for addressing any issues with removal or sliding of the compartment.
The document provides installation instructions for a removable license plate frame on a Tesla Model X. It lists the parts included and has 3 steps for installation. It centers the grill bracket around 3 vertical grill bars and secures the license plate bracket to it with screws. It then attaches the license plate to the bracket with screws and nuts. The document also provides warranty information stating the product is warranted for defects in material and workmanship for the lifetime of the original owner.
The front lighted T installation instructions summarize how to install a lighted Tesla emblem on a Model S. Key steps include removing the factory chrome T and arch, drilling holes to thread wiring through, mounting the lighted T and arch, tapping into 12V power using the OBD2 port, connecting the LED controller module to power and the lighted emblems, and testing the new lighted emblems and included remote control. When installed, the lighted front T and rear T attract attention and admiration from onlookers.
The document provides installation instructions for installing a rear lighted T accessory on a Tesla Model X. The accessory mounts a LED lighted T and arch under the vehicle's chrome emblems. When running lights or brakes are activated, the lights will illuminate to match. The instructions describe removing trim pieces to access wires, connecting the accessory lights to brake, running light, and ground wires using posi-taps and posi-loks, testing the connections, mounting the accessory, and reinstalling trim pieces. Professional installation is recommended due to the complex wiring changes involved.
This document provides instructions for converting a bicycle from rim brakes to disk brakes using a universal disk brake mounting kit. It describes the supplies and tools needed and gives step-by-step instructions for mounting the disk brake caliper and bracket to the bike frame, including drilling holes for bolts. It also describes adding a forward-facing support arm to reinforce the front of the bracket against braking forces.
This document provides installation instructions for installing a tow hitch on a 2012-2016 Tesla Model S. It involves removing various underbody panels and the rear bumper fascia. The hitch plate attaches to existing studs on the frame and additional brackets are installed to reinforce it. A template is provided to cut an access hole in the bumper for the tow ball. Proper safety precautions and labeling of removed hardware is recommended. The installation is designed for up to 200 lbs of tongue weight and 2000 lbs of towing capacity.
The document provides instructions for installing a rear lighted Tesla "T" emblem on a Model S, including removing trim pieces to access wiring, mounting the lighted T and arch using double-sided tape, tapping into wiring to connect the running and brake lights to the T so that it illuminates to match the intensity of the running and brake lights. Tests are described to check that the T illuminates properly when the running lights and brake lights are activated.
The document provides step-by-step installation instructions for a MySpot 200 parking barrier system on a concrete surface. It details locating and preparing the installation site, unpacking and identifying parts, drilling anchor holes, inserting anchors, aligning and securing mounting plates, attaching the barrier and pod units, testing functionality with remote controls, and troubleshooting tips.
How to fix and replace prime vavle in titan impact 440ErepairCenter1
Here are the steps to check issues with leakage, replace the parts with new ones, and fix the prime valve in Impact 440.
Find high-quality sprayer parts at Erepair Center.
How to Replace a Dust Pollen Filter VW Golf/GTI, MKIV Jetta | thevwpartsstore...TheVWPartsStore.com
The document provides step-by-step instructions for replacing the dust pollen filter on a VW Golf/GTI or Jetta. It details the 14 steps to access and remove the old filter, insert the new one, and reinstall the protective cover. Key steps include removing the Torx screws and cover to access the filter, uninstalling the old filter and frame, inserting the new filter and reattaching the frame, and wrestling the cover back into the tight space.
The document provides installation instructions for a MySpot 200 parking barrier system on an asphalt surface. It describes four mounting options for securing the base plates to asphalt, and provides step-by-step instructions for installing the base plates, pods, barrier, and testing the system using the remote controls.
Vehicle Inspection Study Sheet-Ga GenericGary Eller
The document provides a study sheet for inspecting a commercial vehicle. It lists over 100 items to inspect on the tractor, trailer, and inside the cab. The inspection includes checking general exterior condition; engine compartment; steering system; front and rear suspensions; brake systems; tires and wheels; fifth wheel; lights and reflectors; inside of trailer; suspension and brakes on the trailer; and interior of the cab. The inspection must be done thoroughly, pointing out or touching each item and explaining what is being inspected.
The document provides mounting instructions for installing a Serendipity sight onto a 1911 style handgun. It describes how to position and clamp the sight before drilling mounting holes, ensuring proper clearance between the sight and slide. Holes are drilled and tapped, then the sight is installed and screws are trimmed and sealed with Loctite to attach the sight securely while allowing proper slide function.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Here is a user guide for one of the screens from Elite
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
The document provides an overview and installation guide for an LED lighting upgrade kit for a Tesla Model X. It details the locations of the 11 rectangular white LED lights and 2 red lights in the vehicle. The summary describes:
- The LED lights are located in the frunk, front dash/footwells, underneath the front seats, on the front doors as puddle lights, in the trunk, and inside the glove box.
- Installing the lights ranges from easy to difficult, with the frunk lights and those under the front seats being the easiest, while the trunk light is the most challenging due to its tight fit.
- The upgraded LED lights provide much brighter illumination than the factory lights,
The document provides installation instructions for installing a Gen II lighted rear appliqué on a Tesla Model S. It includes a parts list and describes removing the existing appliqué and trim pieces. The key steps are to 1) remove the existing appliqué and clean off residue, 2) modify the black plastic mounting bracket and install the new appliqué, 3) locate wire connections for 12V, ground, reverse, brake, turn signals, etc. in the liftgate and trunk and tap them with connectors, 4) run wiring to the Bluetooth controller module mounted in the left tailgate handle area and connect the wires, and 5) reinstall the trim pieces and test the appliqué functions. Proper
The document provides installation instructions for a Cubby Compartment accessory for Tesla Model S and Model X vehicles. It describes a 4 step installation process that requires no tools and uses magnets to securely attach the compartment in the vehicle's cubby. It notes there may be minor variations between vehicle cubbies that could impact fitting and provides tips for addressing any issues with removal or sliding of the compartment.
The document provides installation instructions for a removable license plate frame on a Tesla Model X. It lists the parts included and has 3 steps for installation. It centers the grill bracket around 3 vertical grill bars and secures the license plate bracket to it with screws. It then attaches the license plate to the bracket with screws and nuts. The document also provides warranty information stating the product is warranted for defects in material and workmanship for the lifetime of the original owner.
The front lighted T installation instructions summarize how to install a lighted Tesla emblem on a Model S. Key steps include removing the factory chrome T and arch, drilling holes to thread wiring through, mounting the lighted T and arch, tapping into 12V power using the OBD2 port, connecting the LED controller module to power and the lighted emblems, and testing the new lighted emblems and included remote control. When installed, the lighted front T and rear T attract attention and admiration from onlookers.
The document provides installation instructions for installing a rear lighted T accessory on a Tesla Model X. The accessory mounts a LED lighted T and arch under the vehicle's chrome emblems. When running lights or brakes are activated, the lights will illuminate to match. The instructions describe removing trim pieces to access wires, connecting the accessory lights to brake, running light, and ground wires using posi-taps and posi-loks, testing the connections, mounting the accessory, and reinstalling trim pieces. Professional installation is recommended due to the complex wiring changes involved.
This document provides instructions for converting a bicycle from rim brakes to disk brakes using a universal disk brake mounting kit. It describes the supplies and tools needed and gives step-by-step instructions for mounting the disk brake caliper and bracket to the bike frame, including drilling holes for bolts. It also describes adding a forward-facing support arm to reinforce the front of the bracket against braking forces.
This document provides installation instructions for installing a tow hitch on a 2012-2016 Tesla Model S. It involves removing various underbody panels and the rear bumper fascia. The hitch plate attaches to existing studs on the frame and additional brackets are installed to reinforce it. A template is provided to cut an access hole in the bumper for the tow ball. Proper safety precautions and labeling of removed hardware is recommended. The installation is designed for up to 200 lbs of tongue weight and 2000 lbs of towing capacity.
The document provides instructions for installing a rear lighted Tesla "T" emblem on a Model S, including removing trim pieces to access wiring, mounting the lighted T and arch using double-sided tape, tapping into wiring to connect the running and brake lights to the T so that it illuminates to match the intensity of the running and brake lights. Tests are described to check that the T illuminates properly when the running lights and brake lights are activated.
The document provides step-by-step installation instructions for a MySpot 200 parking barrier system on a concrete surface. It details locating and preparing the installation site, unpacking and identifying parts, drilling anchor holes, inserting anchors, aligning and securing mounting plates, attaching the barrier and pod units, testing functionality with remote controls, and troubleshooting tips.
How to fix and replace prime vavle in titan impact 440ErepairCenter1
Here are the steps to check issues with leakage, replace the parts with new ones, and fix the prime valve in Impact 440.
Find high-quality sprayer parts at Erepair Center.
How to Replace a Dust Pollen Filter VW Golf/GTI, MKIV Jetta | thevwpartsstore...TheVWPartsStore.com
The document provides step-by-step instructions for replacing the dust pollen filter on a VW Golf/GTI or Jetta. It details the 14 steps to access and remove the old filter, insert the new one, and reinstall the protective cover. Key steps include removing the Torx screws and cover to access the filter, uninstalling the old filter and frame, inserting the new filter and reattaching the frame, and wrestling the cover back into the tight space.
The document provides installation instructions for a MySpot 200 parking barrier system on an asphalt surface. It describes four mounting options for securing the base plates to asphalt, and provides step-by-step instructions for installing the base plates, pods, barrier, and testing the system using the remote controls.
Vehicle Inspection Study Sheet-Ga GenericGary Eller
The document provides a study sheet for inspecting a commercial vehicle. It lists over 100 items to inspect on the tractor, trailer, and inside the cab. The inspection includes checking general exterior condition; engine compartment; steering system; front and rear suspensions; brake systems; tires and wheels; fifth wheel; lights and reflectors; inside of trailer; suspension and brakes on the trailer; and interior of the cab. The inspection must be done thoroughly, pointing out or touching each item and explaining what is being inspected.
The document provides mounting instructions for installing a Serendipity sight onto a 1911 style handgun. It describes how to position and clamp the sight before drilling mounting holes, ensuring proper clearance between the sight and slide. Holes are drilled and tapped, then the sight is installed and screws are trimmed and sealed with Loctite to attach the sight securely while allowing proper slide function.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Here is a user guide for one of the screens from Elite
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Here is a user guide for one of the screens from Elite
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Here is a user guide for one of the screens from Elite
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Sap seal installation guidelines ( do type 2018)sapparts
This document provides guidelines for installing mechanical face seals. Key points include:
1. The seal housing and components must be cleaned using an approved solvent like SAP Parts Seal-O-Fix Spray to remove particles.
2. When handling seals, care should be taken not to damage the polished metal faces and O-rings.
3. A dedicated installation tool is used to correctly position the O-ring on the seal ramp and guide the seal into the housing groove, applying gentle pressure.
Mechanical Face seals are fitted in a
Groove of retaining housing, to form
the sealing at the adjoining faces.
Metal faces are precision Lapped. The
ramp angle of Seal and Housings are
slightly different and form a wedge for
the rubber ring to slide into and form a
compressed profile giving load on the
seals and making it intact.
The installation guidelines are aimed
to protect the precision lapped and
Functional metal sealing faces. The
more precautions taken, the more
Likely the seals will last in the field
This document provides an overview of an automobile service manual. It explains that the manual is divided into 14 sections with tabs corresponding to sections. Each section includes parts disassembly/assembly procedures, inspection, testing, repair, and adjustments. The manual contains warnings about servicing SRS airbag components and provides labeling locations. It also outlines vehicle identification numbers, recommended jacking/lifting points, towing procedures, and service precautions for special nuts/bolts and tires.
Installation instruction Mineral wool sandwich panelsMot panels
1. The document provides installation instructions for mineral wool panels, noting that panels should be installed by experienced teams using proper equipment and safety precautions.
2. Instructions are given for removing protective film from panels, cutting panels safely, fastening panels using recommended fasteners, assembling roof and wall panels, and cleaning and maintaining installed panels.
3. Special care must be taken when installing panels to avoid damage and ensure proper sealing, and annual maintenance is recommended to clean the panels and check for any failures.
The document provides instructions for adjusting a glass slide/tilt sunroof lid on a BMW vehicle. It describes using special tools to check and adjust the distance and height of the sunroof lid relative to the vehicle body. The distance between the lid and body should be 5.8 ± 0.3 mm around the edges. The front edge of the lid should be 0-1 mm under the roof edge at the front and 0.5-1 mm over the rear edge at the back. Adjustments are made by loosening screws and moving the lid as needed.
Komatsu d575 a 2 super dozer bulldozer service repair manual sn 10012 and upfjjsekkmdmes
This shop manual provides service information for maintaining and repairing a Super Dozer serial number D575A-2 to 10012 and up. The manual is divided into chapters covering the machine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, maintenance standards, and other reference information. Technicians are advised to follow the safety precautions given in the manual and always consider safety first when working on the machine.
This document provides installation instructions for Window Control Covers for Tesla Model S and Model X vehicles. It begins with a disclaimer that the manufacturer is not responsible for any vehicle damage during installation or use of the product. It then lists the quick start installation steps, which include removing adhesive covers, adding extra adhesive strips to some pieces, positioning the covers and pressing firmly to adhere them. It notes that the smaller passenger side and rear covers install similarly without extra adhesive. The document concludes by stating the covers are intended for permanent installation but can be removed by prying, though the adhesive will be weakened and may not re-adhere properly.
This document provides instructions for installing an RNS-510 navigation unit in a Volkswagen Jetta/Golf MKV and updating the vehicle coding. It details the required tools and parts, describes how to remove the old head unit and install the RNS-510, connects additional antennas, and provides steps for updating the vehicle coding using VCDS to configure the new navigation unit and remove references to the old unit. Programming steps include recoding the CAN gateway and navigation unit modules to recognize the new navigation option and remove the digital radio and positioning sensing modules that are no longer used.
Similar to EVANNEX Tesla Model S Accent-I Installation (20)
Tesla is accelerating the world's transition to sustainable energy with electric vehicles that have delivered over 3 billion miles and saved over 120 million gallons of gasoline. The company employs over 18,000 people globally and produces 2,000 cars per week at factories while expanding its network of Supercharger stations to enable long distance travel. Air pollution is a serious problem, causing over 2,000 premature deaths and billions in economic losses annually in Hong Kong alone according to recent data, demonstrating the need for sustainable energy solutions.
This document provides installation instructions for the Trunk OrganizerTM product for the Tesla Model X. It can be installed by simply placing it in the trunk well of the Model X without tools. The instructions list 5 quick steps: 1) remove the organizer from the box, 2) fold down rear seats and clear trunk well, 3) place organizer in trunk well with the higher side facing front, 4) add removable dividers as desired, and 5) fill organizer and replace trunk lid. The organizer is meant to provide storage solutions for items in the trunk well.
Glove Box Bumper is an accessory designed to improve storage efficiency in a Tesla Model S glove box. The installation instructions recommend viewing an instructional video before installing. Key steps include removing the red covering from the double-sided tape, positioning the bumper between two humps on the back of the open glove box door 0.75 inches from the leading edge, and pressing down to adhere it in place. The bumper is intended for permanent installation but can be removed by rocking it from side to side.
This 3-sentence summary provides the key details about the document:
JB Straubel, CTO of Tesla, presented at the HIVE conference on September 28, 2016 about how Tesla has disrupted the automotive industry through technological innovation and collaboration. He discussed Tesla's history and milestones, their focus on electric vehicles and battery technology, and their vision for the future of sustainable energy and transportation infrastructure. The presentation provided insights into Tesla's approach to product development and goals to accelerate the world's transition to renewable energy.
This document provides a table of contents that outlines 8 chapters about getting ready for the Tesla Model 3 electric vehicle. It summarizes key information covered in each chapter, including an overview of the Model 3 design, probable vehicle configurations, range and range anxiety, charging options, vehicle performance, autonomous driving capabilities, estimated production and delivery timelines, and the overall cost of owning a Model 3.
The document provides installation instructions for a Cubby Compartment accessory for Tesla vehicles. It describes a 4 step installation process that requires no tools and uses magnetic adhesion to securely install the compartment in the vehicle's cubby. It notes there may be minor variations between vehicle cubby geometries that could impact ease of installation or removal but provides tips to address any issues.
THE CENTRAL QUESTION ...
How can I avoid a slog through the Owners Manual to learn the most salient tips and tricks associated with charging the Model S?
COURSE ABSTRACT
Tips and tricks generally associated with charging the Model S are discussed.
Course level: Advanced
THE CENTRAL QUESTION ...
What are the key factors that I should consider when I try to cost justify the purchase of an EV??
COURSE ABSTRACT
An introduction to the economics of EV ownership is presented. The EV purchase premium is discussed along with the qualitative examination of the factors that must be considered as an economic analysis is conducted. Fuel and maintenance costs, including battery replacement issues, are explored. To obtain a copy of the EVU study guide for this and other available EVU courses, please complete the form on this page.
Course level: Intermediate
THE CENTRAL QUESTION ...
What are the key factors that I should consider when I try to cost justify the purchase of an EV??
COURSE ABSTRACT
An introduction to the economics of EV ownership is presented.
The EV purchase premium is discussed along with the qualitative examination of the factors that must be considered as an economic analysis is conducted. Fuel and maintenance costs, including battery replacement issues, are explored. To obtain a copy of the EVU study guide for this and other available EVU courses, please complete the form on this page.
Course level: Intermediate
THE CENTRAL QUESTION ...
Since the battery is pivotal to my EV, what are the core issues that will allow me to understand battery technology?
COURSE ABSTRACT
A discussion of battery components and fabrication approach, the reasons that building higher capacity batteries are constrained by geometry and technological factors, the key characteristics to assess when comparing battery chemistries, and new battery tech that may lead to significant improvements in those characteristics. To obtain a copy of the EVU study guide for this and other available EVU courses, please complete the form on this page.
Course level: Intermediate
THE CENTRAL QUESTION ...
Since the battery is pivotal to my EV, what are the core issues that will allow me to understand battery technology?
COURSE ABSTRACT
A discussion of battery components and fabrication approach, the reasons that building higher capacity batteries are constrained by geometry and technological factors, the key characteristics to assess when comparing battery chemistries, and new battery tech that may lead to significant improvements in those characteristics. To obtain a copy of the EVU study guide for this and other available EVU courses, please complete the form on this page.
Course level: Intermediate
THE CENTRAL QUESTION ...
Since the battery is pivotal to my EV, what are the core issues that will allow me to understand battery technology?
COURSE ABSTRACT
A discussion of battery components and fabrication approach, the reasons that building higher capacity batteries are constrained by geometry and technological factors, the key characteristics to assess when comparing battery chemistries, and new battery tech that may lead to significant improvements in those characteristics. To obtain a copy of the EVU study guide for this and other available EVU courses, please complete the form on this page.
Course level: Intermediate
THE CENTRAL QUESTION ...
How does the electric motor serve to brake my EV and what are the underlying principles that enable braking to happen?
COURSE ABSTRACT
The use of regenerative braking as a mechanism for capturing and reusing a vehicle’s kinetic energy is presented. Basic kinetic energy concepts are discussed, the characteristics of an electric motor that allows it to become a generator are explored, the system diagram for a regenerative braking system is considered, and driving with regen is examined. To obtain a copy of the EVU study guide for this and other available EVU courses, please complete the form on this page.
Course level: Intermediate
THE CENTRAL QUESTION ...
I'm worried that if I buy an EV my battery will run out, and I'll be stranded. Is that a reasonable concern or am I over-reacting?
COURSE ABSTRACT
A discussion of range and range anxiety with an emphasis on the issues that must be considered to determine whether range might be an issue for you. To obtain a copy of the EVU study guide for this and other available EVU courses, please complete the form on this page.
Course level: Intermediate
More from EVANNEX Aftermarket Tesla Accessories (14)
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
1. Accent-I Interior Accent Package—Installation Guide 1
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
Accent-I
Interior Accent Package
Installation Guide*
Please read this document in its entirety before you begin the installation of Accent-I. A detailed
installation video is available at www.evannex.com.
The Accent-I interior accent package is designed for those Model S owners who would like to add easily
installed interior customization for the Model S. Although we provide detailed instructions for the installation
of this Accent-I package, some Model S owners may prefer to get help. If you feel uncomfortable with this
installation for any reason, we strongly recommend that you engage a professional installer to do the work
for you.
IMPORTANT: Please be certain that you’re satisfied with the look and style of each of the Accent-I
pieces BEFORE you remove any part of the red adhesive backing from any piece. Once the red
adhesive backing has been removed from any piece, this Accent-I package cannot be returned for a
refund or credit.
THE ACCENT-I PACKAGE
Accent-I provides everything you’ll need to change the look of your Model S interior. Using Accent-I your
dash and center tower can now be finished in Redwood Burl, Sycamore Burl, Greywood or Carbon
Fiber, regardless of the factory installed trim that came with your Model S. In addition, you can acquire our
Center Console Insert (CCI) finished in a trim that matches your new dash and center tower. The following
pieces are provided as part of the Accent-I package.
ACCENT-I INSTALLATION VIDEO
A detailed Accent-I Installation Video can be found by visiting:
www.evannex.com Interior Accent-I Installation Tab
We strongly recommend that you review the entire video before you begin installation of Accent-I.
2. Accent-I Interior Accent Package—Installation Guide 2
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
GENERIC INSTALLATION COMMENTS
1. There are two strategies for installing Accent-I:
• Semi-permanent installation. Allows the removal of the Accent-I pieces without substantial
effort.
• Permanent installation. Provides exceptionally strong adhesion to the underlying surface but
will also result in difficulty in removing Accent-I and the potential for minor damage to the
underlying surface.
We recommend “semi-permanent installation,” but the final decision is yours. Preparation for
both types of installation is discussed in this document.
2. If you choose the “semi-permanent installation” approach, Accent-I can be removed
relatively easily if you no longer want the look.
3. If you choose the “permanent installation” approach,
a. It is very important to properly align each Accent-I piece before pressing it into
place. The adhesive used for Accent-I is extremely strong, and it will be difficult to remove
the accent piece once it adheres. First, fit each piece without removing its red adhesive
backing to ensure you understand fit and orientation. You can use masking tape to
provide temporary support for the piece as you work on alignment and installation,
removing it as you install the piece.
b. We advise installing each Accent-I piece “incrementally.” By this, we mean that you
should remove only a small portion of the red adhesive backing material (exposing only a
small part of the adhesive surface), then align an edge of each piece, again checking
alignment of the edge and adjacent or perpendicular edges. Work slowly to affix the
material in steps while pulling the red backing off. Then press the part into place.
c. Removal is more difficult, but still possible (see instructions on page 9 of this
document). It is important to note that removal can permanently stretch and/or damage
the Accent-I pieces and might cause minor damage to your factory trim finish.
WARNING: Because factory-installed Lacewood trim is soft and open grain, any attempt at
removing Accent-I from factory Lacewood trim can damage the factory trim, regardless of
whether you choose semi-permanent or permanent installation. Therefore, application of
Accent-I onto Lacewood MUST be considered a permanent installation.
PREPARATIONS FOR SEMI-PERMANENT INSTALLATION (RECOMMENDED APPROACH)
IMPORTANT: Before you remove any part of the red adhesive backing, fit each piece into its
appropriate location to: (1) ensure that you’ve chosen the correct piece and (2) to familiarize yourself with
the installation approach.
Semi-permanent installation is for those Model S owners who want to keep their options open. That is, they
really like Accent-I and intend to customize their Model S with it. But they want to be able to remove
Accent-I pieces at some later date, and either (1) try a different Accent-I trim finish, or (2) return to the
factory trim.
Within certain constraints, it is possible to accomplish this. In essence, you will follow all of the installation
instructions contained in this document, but instead of removing the entire red backing for the adhesive on
each Accent-I piece, do the following:
Step A. Using a #1 Xacto knife (or similar sharp blade), cut a 3/8 inch to ½ inch border on the back
of larger Accent-I pieces and a narrower border on smaller trim pieces. IMPORTANT: Cut just deep
enough to cut through the red adhesive backing, no deeper!
Step B. Pull off the backing for the border only. See photo below. This will allow you to adhere the
edges of an Accent-I piece, but because the surface area for adhesion is relatively small, the
Accent-I piece is much easier to remove. The remainder of the red adhesive backing stays where it
is, as shown in the photo below
3. Accent-I Interior Accent Package—Installation Guide 3
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
Notes:
1) The wider the ‘border’ that exposes the adhesive, the stronger the bond for the entire Accent-I
piece. If you’d like a stronger bond, cut slightly wider borders for larger pieces. However, as the
border is widened and the bond becomes stronger, the pieces become increasingly more difficult to
remove.
2) Accent-I pieces installed using the semi-permanent approach will not adhere as strongly and may
have to be pressed back into place from time to time.
3) Accent-I pieces installed using the semi-permanent approach may still be damaged (e.g.,
stretched or broken) as you remove them, and some adhesive may have to be removed from the
underlying surface.
WARNING: Removal of Accent-I pieces using the semi-permanent approach can damage Lacewood open
grain trim when it is removed. Proceed with caution when you have factory installed Lacewood trim.
IMPORTANT: Please be sure to recognize that once the red adhesive backing is removed from any
Accent-I piece (including the ‘borders’), the entire Accent-I package cannot be returned. See our
"Returns" tab for further details.
4. Accent-I Interior Accent Package—Installation Guide 4
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
PREPARATIONS FOR PERMANENT INSTALLATION
Permanent installation is for those Model S owners who want to provide the strongest possible bond
between the underlying surface and the Accent-I piece. Removal of permanently installed Accent-I pieces
is possible and is discussed at the end of this document.
As each Accent-I piece is installed, the red adhesive backing is removed in it entirety. But this is done
“incrementally” as you install each piece so that the underlying trim surface is exposed to only a small part of
the Accent-I adhesive as the piece is aligned in its proper location and orientation.
IMPORTANT: Even if you do decide to use the permanent installation approach, we strongly recommend
that you do a test install using the semi-permanent method. This will allow you to get a feel for installation
before you remove the full adhesive backing from each piece for a permanent install.
INSTALLATION INSTRUCTIONS
IMPORTANT: Before you remove the red adhesive backing, fit each piece into its appropriate
location to: (1) ensure that you’ve chosen the correct piece for the location and (2) to familiarize yourself
with the installation approach.
Tools required: A #1 Xacto knife (or similar) is required for semi-permanent installation (recommended).
Materials required: Masking tape, a spray bottle contained a mixture of alcohol and distilled water
(available at any large pharmacy) in a 30% alcohol, 70% water mixture, and a clean, soft cloth.
Step 1. Clean the entire dash and upper center tower surface using an alcohol-water mixture. Allow to dry.
DASH—PASSENGER SIDE (see Figure 1 for overview of steps)
Step 2. Install the large passenger side front piece beginning on its left side (areas A, B and C in Figure
1).* Be certain to butt the left edge of the accent piece against the brushed aluminum frame (near B) and
against the bottom edge upholstery (along C and E) throughout the entire length. Keep the right portion of
the piece raised above the surface and slowly lower (in areas D and E) as you move to the right. On the
right side near the door, DO NOT adhere the narrow vertical strip in area G (leave the red adhesive backing
in place!) until you install the right hand passenger side air vent frame accent piece (Step 3).
Step 3a. Install the right hand passenger side air vent frame accent piece.* Be sure to butt the accent
against the chrome frame of the air vent and against the corresponding outline curve cut into the large
passenger side front piece. Be sure the edge between the pieces is tight and smooth.
Step 3b. Install the left hand passenger side air vent frame accent.* See photo above. Be sure to butt
the accent against the chrome frame of the air vent and against the corresponding outline curve cut into the
larger dash piece. It may be necessary to bend the frame piece slightly and slide it under the aluminum
frame on both the upper left and right edge to achieve proper fit.** Use your finger to ensure that the pieces
properly butt the corresponding edge of the larger dash accent piece.
Step 3c. Remove the red adhesive backing from the narrow vertical strip on the right end of the large
passenger side front piece (in the area of G. Be sure it properly butts with the right hand passenger side
air vent frame accent, then press it into place.
-----------------------------------
* If you have chosen semi-permanent installation, you will first cut a border around this piece. If you have chosen
permanent installation, you will remove the entire red adhesive backing incrementally as you install.
** If your Model S has a newer aluminum frame design (cars released in mid-2014 and after) it may be necessary to left
the aluminum frame slightly put pulling toward you as you slide the Accent-I piece under the frame.
5. Accent-I Interior Accent Package—Installation Guide 5
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
Figure 1. Installing passenger side front piece
Step 4. Install the passenger-side dash end piece (i.e., also called the “end cap,” this is the larger accent
piece that fits on the side of the dashboard facing the passenger door (see Figure 2).* Be sure to butt the
passenger-side dash end piece against the back of the doorframe (Figure 2, locations B and C), but at the
same time, align it with the shape of the edge of the dash accent piece.
Note: The factory installed side dash panel on your Model S may
have some give, deflecting inward or outward by as much as a
quarter of an inch. If this is the case for your Model S, it may be
difficult to make the passenger-side dash end piece adhere to the
edge of the front dash accent piece. This is a characteristic of the
assembly of the Model S, and as a consequence, a small gap may
be visible when the door is open. It will not be visible when the door
is closed.
Note: For steps 3 and 4, use your finger to smooth the edges and
ensure that all pieces are properly seated and properly abut the
corresponding shapes in the larger passenger side dash accent
piece. There will be a visible seam between these two pieces but it
should be smooth and tight. The seam cannot be avoided given the
shape of the dash trim in this area and the fabrication characteristics
of the Accent-I pieces.
Figure 2. Installing passenger-side dash end piece
DASH—LEFT DRIVER SIDE (see Figure 3 for overview of steps)
Step 5. Install the left-hand driver side dash accent.* Be sure to butt the accent piece to the lower
upholstery edge (Figure 3, area B). To achieve proper fit, it may be necessary to tuck the edges of the piece
under the aluminum frame ** on the upper left and the far right (Figure 3, areas A and C).
Step 6. Install the left-hand driver side air vent frame accent.* Be sure to butt the accent piece to the
edge of the left-hand driver side dash accent. To achieve proper fit, it may be necessary to slide the air
vent frame under the aluminum frame on the upper left and the far right. See Figure 3.
-----------------------------------
* If you have chosen semi-permanent installation, you will first cut a border around this piece. If you have chosen
permanent installation, you will remove the entire red adhesive backing incrementally as you install.
** If your Model S has a newer aluminum frame design (cars released in mid-2014 and after) it may be necessary to left
the aluminum frame slightly put pulling toward you as you slide the Accent-I piece under the frame.
6. Accent-I Interior Accent Package—Installation Guide 6
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
Figure 3. Installing left-hand driver side dash accent
Step 7. Install the driver-side dash end piece.* Using an approach analogous to the one used in Step 4,
be sure to butt the side dash piece against the back of the door frame but at the same time, align it with the
shape of the edge of the dash accent piece.
Note: The factory installed side dash panel on your Model S may have some give, deflecting inward or
outward by as much as a quarter of an inch. If this is the case for your Model S, it may be difficult to make
the side accent piece adhere to the edge of the front dash accent piece. This is a characteristic of the
assembly of the Model S and as a consequence, small gap may be visible when the door is open.
-----------------------------------
* If you have chosen semi-permanent installation, you will first cut a border around this piece. If you have chosen
permanent installation, you will remove the entire red adhesive backing incrementally as you install.
7. Accent-I Interior Accent Package—Installation Guide 7
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
DASH—RIGHT DRIVER SIDE (see Figure 4 for overview of steps)
Step 8. Install the right-hand driver side dash accent.* Be sure to butt the accent piece to the lower
upholstery edge beginning with the curve in the right lower corner. To achieve proper fit, it may be
necessary to slide the accent piece under the aluminum frame on both the left and right of the right hand
driver side dash area.**
Step 9. Install the right-hand driver side air vent frame
accent.* To achieve proper fit, it may be necessary to slide
the frame accent under the brushed aluminum frame.
CENTER TOWER FRONT (see Figure 5 for overview of
steps)
Step 10. Push the factory armrests to their rear position
(i.e., the factory cup holders are uncovered fully).
Step 11 Install the center tower top accent (front).*
Begin by tipping the piece so that the front edge (nearest
the dash) is raised and the rear edge is ready to slide under
the armrests in their retracted position. Slide the piece
under the armrest. and then position using the existing cup
holder chrome frame as a guide, align the center tower
top accent (front) so that it abuts the cup holder chrome
frame around its entire perimeter beginning with the two flat
areas along its front to back centerline, being sure that it
also aligns to the right and left top edges of the center
tower top surface.
Step 15. Install the center tower front edge accent and
press into place.* The center tower top accent (front)
should adhere to the top edge of the front edge accent.
Press the seam closed for a smooth fit.
Figure 4. Installing right-hand driver side dash accent.
Figure 5. Installing the center tower top accent (front)* and edge.
-----------------------------------
* If you have chosen semi-permanent installation, you will first cut a border around this piece. If you have chosen
permanent installation, you will remove the entire red adhesive backing incrementally as you install.
** If your Model S has a newer aluminum frame design (cars released in mid-2014 and after) it may be necessary to left
the aluminum frame slightly put pulling toward you as you slide the Accent-I piece under the frame.
8. Accent-I Interior Accent Package—Installation Guide 8
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
CENTER TOWER REAR (see Figure 6 for overview of steps)
Step 12. Push the factory arm rests to their front position (i.e., the factory cup holders are covered fully).
[For owners who have installed PARZ (armest + rear seat cupholders) by EVannex, contact us for
Installation options for the center tower top accent (rear).]
Step 13. Install center tower rear edge accent.* Align the bottom of the accent with the bottom edge of the
existing factory trim just above the rear air vent.
Step 14. Tilt the rear of the center tower top accent (rear) upward and then carefully align the sides of the
with the sides of the center tower. Carefully slide the center tower top accent (rear) under the arm rests
about 2- 3 mm. Be sure that the sides are aligned and that the rear curve of the center tower top accent
(rear) aligns with the curve of the center tower rear edge accent.
Step 15. Press into place, being sure both sides align with the edges of the center tower.
Figure 6. Installing center tower top accent and rear edge accent
-----------------------------------
* If you have chosen semi-permanent installation, you will first cut a border around this piece. If you have chosen
permanent installation, you will remove the entire red adhesive backing incrementally as you install.
9. Accent-I Interior Accent Package—Installation Guide 9
*EVannex is not responsible for any damage that might occur as a consequence of Accent-I installation.
REMOVAL OF THE ACCENTS
Removal instructions when the recommended semi-permanent installation has been used:
If you used the recommended semi-permanent installation approach (i.e., you removed only the boundary
of the adhesive backing for all pieces), Accent-I pieces are relatively easy to remove. It’s likely you can
remove the pieces with your fingers, but you can using a plastic putty knife or professional auto panel
removal tool (i.e., a sharp plastic edge) and pry up a corner and then peel off each piece beginning at its
edge. DO NOT use a metal edge to pry up the piece!
Removal instructions when permanent installation has been used:
If you used the permanent installation approach (i.e., you removed the entire adhesive backing for all
pieces), the product should be viewed as a permanent installation. Removal will permanently stretch and/or
damage the Accent-I pieces and can cause damage to your factory trim finish.
WARNING: Because Lacewood trim is a soft, open grain trim, any attempt at removing Accent-I
from factory Lacewood trim using either the semi-permanent or permanent installation
procedure is likely to damage the factory trim. Therefore, application of Accent-I to Lacewood
MUST be considered a permanent installation.
Starting at a corner of the Accent-I piece, use a plastic putty knife or professional auto panel removal tool
(i.e., a sharp plastic edge) and pry up the corner. You can heat the surface of the Accent-I piece with a hair
drier -- NOT a heat gun -- and this will help by making the material slightly more pliable. Then, working
methodically, use the sharp plastic edge and work inward, pulling the material up as you go. DO NOT use a
metal edge to pry up the piece!
IMPORTANT NOTES FOR REMOVAL:
1) Some of the adhesive will be left on the surface. This can be removed by rolling it up with the
sharp plastic edge or even your fingernail; the original surface can then be cleaned with acetone to
remove any final adhesive smudges.
2) It's unlikely that you'll damage the automotive surface beneath the Accent-I piece, but it can
happen if you scratch the surface while removing the adhesive. Be careful! Use only plastic if
you need to pry up the Accent-I piece. Also, if you adhere the pieces to a porous or soft surface (i.e.,
Lacewood trim), damage will occur during removal.
3) An Accent-I piece that is removed may be stretched or damaged to some extent, so you should only
remove it if you no longer want the look. Damage and stretching can occur regardless of the
installation approach you have used, but is much more likely when the permanent installation
approach is used.