This document provides installation instructions for the Trunk OrganizerTM product for the Tesla Model X. It can be installed by simply placing it in the trunk well of the Model X without tools. The instructions list 5 quick steps: 1) remove the organizer from the box, 2) fold down rear seats and clear trunk well, 3) place organizer in trunk well with the higher side facing front, 4) add removable dividers as desired, and 5) fill organizer and replace trunk lid. The organizer is meant to provide storage solutions for items in the trunk well.

1. EVannex® — Tesla Aftermarket Accessories
3413 SW 14
th
Street •• Deerfield Beach, FL 33442 •• www.evannex.com
Disclaimer: Evannex is not responsible for any vehicle damage caused during the installation or use of this product.
Any costs associated with any vehicle damage are the sole reponsibility of the purchaser.
Trunk OrganizerTM
for Model X
Installation Instructions
Thanks for purchasing Trunk Organizer. Please read these installation instructions in their
entirety BEFORE you attempt to install Trunk Organizer for Model X.
Trunk Organizer has been designed to provide a storage solution for the trunk well of your
Model X. We’ve created an Installation Video that can be viewed at www.evannex.com. We
strongly recommend that you view it BEFORE you or someone else install Trunk Organizer.
DISCLAIMER: Trunk Organizer is installed by placing it into the trunk well of the Model X
trunk. This installation is quite simple and does not require any tools or measurement.
However, Evannex® is NOT responsible for any damage and/or repair or replacement costs
associated with the installation and/or any residual damage that might occur during
installation or later use of Trunk Organizer.
Quick Start Installation Steps:
Tools required: none
Step 1. Remove Trunk Organizer from its shipping box. No assembly is required.
Step 2. If your third row seats are in use, fold them down temporarily. Remove the Model X
trunk well lid and clear any items from your Model X trunk well and lay them aside.

2. EVannex® — Tesla Aftermarket Accessories
3413 SW 14
th
Street •• Deerfield Beach, FL 33442 •• www.evannex.com
Disclaimer: Evannex is not responsible for any vehicle damage caused during the installation or use of this product.
Any costs associated with any vehicle damage are the sole reponsibility of the purchaser.
Step 3. Place Trunk Organizer into the trunk well so that the higher side is facing toward the
front of the Model X (see photo) . This will enable the top profile of Trunk Organizer to be
perfectly flat, thereby allowing the trunk lid to be placed in either the upper or lower position.
Note: If you want to “hide” one or more items under Trunk Organizer at the bottom of the
Trunk well, place them there before you install Trunk organizer.
Step 4. Place the removable dividers into the orientation that you desire. If you decide you
don’t need one or more of the dividers, it’s a good idea to place them under Trunk Organizer
at the bottom of the Trunk Well. You may decide to use them in the future.
Step 5. Fill Trunk Organizer with the items you want stored and replace the trunk lid in
either the upper of lower position. Reorient the third row seats into the position you desire.
Installation is complete!
NOTE: Do not attempt to lift a fully loaded Trunk Organizer out of the trunk well. Doing so can damage it.
Remove your stored items and then remove Trunk Organizer.