March 22-24, 2017
• Learn from top industry professionals.
• ESD Association instructors who developed the ANSI/ESD and IEC ESD Standards bring you today’s current information and developments.
• EOS/ESD Association, Inc. is the Global Leader on ESD Education
Courses:
FC361: Class 0A Devices & Boards - ESD Controls and Auditing
Measurements
FC360: Electrical Overstress (EOS) in Manufacturing and Test
FC340: ESD Program Development and Assessment (ANSI/ESD
S20.20 Seminar)
For more information visit https://esda.org/events/regional-tutorials/
FC340: ESD Program Development and Assessment (ANSI/ESD S20.20 Seminar) - John Kinnear
FC361: Class 0A Devices & Boards - ESD Controls and Auditing Measurements - Terry Welsher
FC360: Electrical Overstress (EOS) in Manufacturing and Test
- Terry Welsher
EOS/ESD Association, Inc. Manufacturing Symposium in SingaporeEOS/ESD Association
The document announces an EOS/ESD Association event taking place from March 27-31, 2017 at the Genting Hotel Jurong in Singapore. The event includes ESD tutorials on March 27-28, an ESD manufacturing symposium on March 29-30 with technical presentations and demonstrations, and the PrM (Program Manager) certification exam on March 31. Attendees can earn certification by attending the tutorials, online courses, and passing the exam. The event is sponsored by EOS/ESD Association and co-sponsored by Everfeed Technology to bring ESD program manager certification and training to professionals in Asia.
The EOS/ESD Symposium for Factory Issues - Malaysia is a valuable international event focused on discussing the issues and providing the answers to electrostatic discharge in electronic production and assembly. Your company will benefit from the latest knowledge, networking, and exchange of ideas in the Electrostatic Discharge industry - but sometimes convincing management of that takes some work.
• Use the link below to communicate to your management the Tremendous value of attending the EOS/ESD Symposium for Factory Issues.
https://www.esda.org/assets/Uploads/documents/ValueOfAttendingSymposium.pdf
Sponsored by EOS/ESD Association
Co-sponsored by Everfeed Technology Pte., Ltd.
Cost
Tutorials November 11-12, 2015 $ 950 USD
ESD Basics, ANSI/ESD S20.20 - Process Design Overview, Process Assessment
Symposium Only November 13, 2015 $ 400 USD
One full day of Invited Talks and Workshops
Symposium Bundle November 11-13, 2015 $1,100 USD
Symposium plus two-day ESD Tutorials
https://www.esda.org/events/eosesd-symposia/eosesd-factory-symposia/
Joel Gray Environmental Biomedical Consultant CV Jan 2017 MAC Radon AEIJoel-Anthony Gray
- Joel-Anthony Gray has over 25 years of experience in 7 technical fields including environmental consulting, nanotechnology research, automotive mechanics, electronics repair, and telecommunications. He has a B.S. in Electrical Engineering and is pursuing a B.S. in Biomedical Engineering.
- He owns an environmental and biomedical consulting firm called ScanTech Technical Consulting, where he performs indoor air quality surveys, electromagnetic field consulting, and assists clients in resolving legal disputes by collecting technical data.
- He has nanotechnology research experience at Zyvex Instruments and the University of Texas at Dallas, where he conducted projects in nanomechanics, nanobiomedical technology, and served as lab manager of the nanoscience research
Bapele Engineered Energy Solutions (BEES) is a South African engineering firm specializing in renewable energy, sustainability, earthing, lightning protection, and electrical services. BEES was founded by three women directors with decades of combined experience. BEES aims to provide safe, innovative solutions through services like carbon audits, solar installation, energy management, and earthing/lightning protection system design, installation, and certification. BEES works across multiple sectors and has experience with many large South African and international clients.
Make sure you have people with the right knowledge to maintain your ESD control program
at the highest level.
• ESDA Certification courses are part of the globally recognized Certified Professional Program Manager
Program developed by the ESD Association.
• This seminar is intended to provide the student with the necessary understanding of the principles
involved in S20.20, to allow the development of an ESD Control Program Plan that minimizes the risk
of damage to sensitive items. In-class discussions cover real life ESD program problems and solutions.
SP Technical Research Institute of Sweden provides testing services to help electronics manufacturers secure product approvals and improve reliability. They offer EMC compliance testing, climatic and mechanical testing, failure analysis, and reliability testing. Their lab is equipped to simulate real-world environmental exposures and analyze product failures to identify root causes. They assist customers throughout the product development process from concept to field testing.
Santi Sam Keomorokot has over 10 years of experience as an electronics and RF technician. He has expertise in testing, repairing, and tuning a wide range of telecommunications and fiber optic equipment. His skills include soldering, circuit board rework, fiber splicing, equipment calibration and functional testing. He is proficient in using test equipment such as network analyzers, function generators, and oscilloscopes.
FC340: ESD Program Development and Assessment (ANSI/ESD S20.20 Seminar) - John Kinnear
FC361: Class 0A Devices & Boards - ESD Controls and Auditing Measurements - Terry Welsher
FC360: Electrical Overstress (EOS) in Manufacturing and Test
- Terry Welsher
EOS/ESD Association, Inc. Manufacturing Symposium in SingaporeEOS/ESD Association
The document announces an EOS/ESD Association event taking place from March 27-31, 2017 at the Genting Hotel Jurong in Singapore. The event includes ESD tutorials on March 27-28, an ESD manufacturing symposium on March 29-30 with technical presentations and demonstrations, and the PrM (Program Manager) certification exam on March 31. Attendees can earn certification by attending the tutorials, online courses, and passing the exam. The event is sponsored by EOS/ESD Association and co-sponsored by Everfeed Technology to bring ESD program manager certification and training to professionals in Asia.
The EOS/ESD Symposium for Factory Issues - Malaysia is a valuable international event focused on discussing the issues and providing the answers to electrostatic discharge in electronic production and assembly. Your company will benefit from the latest knowledge, networking, and exchange of ideas in the Electrostatic Discharge industry - but sometimes convincing management of that takes some work.
• Use the link below to communicate to your management the Tremendous value of attending the EOS/ESD Symposium for Factory Issues.
https://www.esda.org/assets/Uploads/documents/ValueOfAttendingSymposium.pdf
Sponsored by EOS/ESD Association
Co-sponsored by Everfeed Technology Pte., Ltd.
Cost
Tutorials November 11-12, 2015 $ 950 USD
ESD Basics, ANSI/ESD S20.20 - Process Design Overview, Process Assessment
Symposium Only November 13, 2015 $ 400 USD
One full day of Invited Talks and Workshops
Symposium Bundle November 11-13, 2015 $1,100 USD
Symposium plus two-day ESD Tutorials
https://www.esda.org/events/eosesd-symposia/eosesd-factory-symposia/
Joel Gray Environmental Biomedical Consultant CV Jan 2017 MAC Radon AEIJoel-Anthony Gray
- Joel-Anthony Gray has over 25 years of experience in 7 technical fields including environmental consulting, nanotechnology research, automotive mechanics, electronics repair, and telecommunications. He has a B.S. in Electrical Engineering and is pursuing a B.S. in Biomedical Engineering.
- He owns an environmental and biomedical consulting firm called ScanTech Technical Consulting, where he performs indoor air quality surveys, electromagnetic field consulting, and assists clients in resolving legal disputes by collecting technical data.
- He has nanotechnology research experience at Zyvex Instruments and the University of Texas at Dallas, where he conducted projects in nanomechanics, nanobiomedical technology, and served as lab manager of the nanoscience research
Bapele Engineered Energy Solutions (BEES) is a South African engineering firm specializing in renewable energy, sustainability, earthing, lightning protection, and electrical services. BEES was founded by three women directors with decades of combined experience. BEES aims to provide safe, innovative solutions through services like carbon audits, solar installation, energy management, and earthing/lightning protection system design, installation, and certification. BEES works across multiple sectors and has experience with many large South African and international clients.
Make sure you have people with the right knowledge to maintain your ESD control program
at the highest level.
• ESDA Certification courses are part of the globally recognized Certified Professional Program Manager
Program developed by the ESD Association.
• This seminar is intended to provide the student with the necessary understanding of the principles
involved in S20.20, to allow the development of an ESD Control Program Plan that minimizes the risk
of damage to sensitive items. In-class discussions cover real life ESD program problems and solutions.
SP Technical Research Institute of Sweden provides testing services to help electronics manufacturers secure product approvals and improve reliability. They offer EMC compliance testing, climatic and mechanical testing, failure analysis, and reliability testing. Their lab is equipped to simulate real-world environmental exposures and analyze product failures to identify root causes. They assist customers throughout the product development process from concept to field testing.
Santi Sam Keomorokot has over 10 years of experience as an electronics and RF technician. He has expertise in testing, repairing, and tuning a wide range of telecommunications and fiber optic equipment. His skills include soldering, circuit board rework, fiber splicing, equipment calibration and functional testing. He is proficient in using test equipment such as network analyzers, function generators, and oscilloscopes.
The document provides a summary of Alex de Guzman Ferrer's professional experience and qualifications. It details his current role as a Senior Failure Analysis Engineer at Fairchild Semiconductor Philippines, Inc., where he leads failure analysis projects and ensures enhanced failure analysis procedures. It also outlines his previous roles in failure analysis, reliability engineering, and as a reliability technician at Vishay Philippines and PSI Technologies. His educational background and training in failure analysis and semiconductor reliability are also summarized.
The document summarizes a Young Members Night event hosted by the Liberty Bell Chapter of ASM. The event featured a presentation on the influence and use of standards in the specialty metals industry. It thanked various organizations and individuals for their contributions to the successful event. It also announced an upcoming welding metallurgy course and a tour of Carpenter Technology's VIM unit in January 2020. Members were encouraged to volunteer and provide ideas to help the chapter.
The IEEE Code of Ethics establishes principles for professional conduct for software engineers. It outlines 8 key actions and responsibilities, including acting in the public interest, maintaining independent judgment, producing high quality products, managing software development ethically, advancing the integrity of the profession, supporting colleagues, and pursuing lifelong learning in the practice of the profession. The code is intended to provide guidance to software engineers on their ethical responsibilities.
Sylvia E. Sohn is a process engineer with expertise in microfabrication processes, materials analysis techniques, statistical process controls, and Lean Six Sigma. She has over 5 years of experience in cleanroom fabrication of optoelectronic devices, process development and improvement. Currently she works at Epitaxial Technologies fabricating APD laser devices using photolithography and other processes. Previously she conducted research on microfluidic separation systems at Johns Hopkins University and investigated toothpaste abrasives at Colgate-Palmolive. She holds an MS in chemical engineering from Johns Hopkins University and is a Lean Six Sigma Master Black Belt.
Usman Afzal is seeking a new position where he can utilize his 8 years of experience as a Test Technician Level 3 at Oxford Instruments, a market leader in X-ray analysis equipment. He has strong technical skills including operating SEM machines, soldering, troubleshooting electronics, and maintaining production standards. He is proficient in Microsoft Office, has management experience, and aims to continuously develop new skills.
This document provides a 3 sentence summary of the IEEE Guide for Safety in AC Substation Grounding:
The guide concerns grounding practices for outdoor alternating current substations, including distribution, transmission, and generating plant substations. It describes proper grounding methods to help ensure safety in substation design and operation. The guide was developed by the IEEE Power and Energy Society's Substations Committee and is intended to provide guidance, rather than quantitative analysis, on safety issues related to substation grounding.
Christopher C. Greci is seeking an engineering opportunity that allows him to advance his technical and leadership skills in reliability engineering. He has over 15 years of experience as a semiconductor reliability engineer at Analog Devices, Inc., where he developed qualification requirements, researched new technologies, supported qualifications, and led projects. Greci has an M.S. in Engineering Management from Tufts University and a B.S. in Electrical Engineering from the University of Connecticut. He has expertise in areas such as statistical analysis, semiconductor physics, and reliability testing standards.
A code of ethics outlines principles to guide professionals in conducting business honestly and with integrity. It provides rules and guidelines for ethical behavior, though it may not solve every dilemma. A compliance-based code relies on clear rules and consequences, while a value-based code requires greater self-regulation. Well-known professions like doctors, lawyers and engineers often have their own codes addressing topics like integrity, objectivity, confidentiality and competency. Implementing a code involves distributing it widely, specifying management's role, and establishing accountability measures.
Connie Justice's curriculum vita summarizes her extensive education and experience in cybersecurity and information technology. She holds a D.Sc. in Cybersecurity as well as other degrees and certifications. Her professional experience includes roles in academia, consulting, and the military. She has received several awards for her work in cybersecurity education.
This advertisement is for a tattoo removal and lightening clinic that helps people who want to change large tattoo sleeves that no longer fit their lifestyle. The clinic offers tattoo removal services to take away unwanted tattoos completely or lighten them so they can be covered up with new tattoos that better represent the person now.
Atlantex Manufacturing Corporation is celebrating its 25th anniversary as a leading U.S. manufacturer of high-temperature and abrasion-resistant protection products. The company began in 1992 in Parkesburg, PA producing knitted textiles and has since expanded its product lines and capabilities. It now produces millions of feet of protective solutions each year for industrial, automotive, defense and other applications. Atlantex has achieved success over 25 years by adhering to core values of consistent quality, helpful customer service and commitment to customer success.
El estudio comparó el nivel de felicidad entre estudiantes de Psicología y Administración en una universidad privada de Tarapoto. Se encontró que el 41% de los estudiantes de Psicología y el 28% de los de Administración reportaron un alto nivel de felicidad. Además, los estudiantes de Psicología mostraron niveles significativamente más altos de felicidad general así como en las dimensiones de sentido positivo de vida y satisfacción con la vida.
El documento describe la hidrosfera de la Tierra, explicando que el agua se encuentra en los océanos, aguas continentales, hielo polar y de montaña. Explica que el agua puede encontrarse en estado sólido, líquido o gaseoso y se mueve entre estos estados a través del ciclo del agua. Además, detalla la distribución y tipos de aguas continentales como ríos, lagos y aguas subterráneas.
The document provides an annual letter summarizing the performance of an investment portfolio in 2016, noting returns of 10.4% for the year but that the portfolio underperformed market indexes. It discusses several positions, including adding shares of easyJet after its stock price declined on Brexit uncertainty, exiting positions in Potash Corp and Aéroports de Paris, and initiating a new position in Bolloré due to its complex ownership structure hiding its true value. The outlook expresses that markets appear fully valued currently but that the portfolio has cash available from a client's home purchase to deploy into new investment opportunities as they arise.
Piso 21 es un grupo musical colombiano formado en 2007 en Medellín por cuatro amigos músicos: Juan David Castaño, David Escobar, Juan David Huertas y Pablo Mejía. El grupo se formó después de que los cuatro se conocieron en un asado y descubrieron su pasión compartida por la música. Comenzaron a ensayar en el piso 21 de un edificio desde donde podían ver toda la ciudad, y de ahí tomaron su nombre Piso 21. Desde entonces han trabajado juntos como una familia para alcanzar el éxito con su música.
Prod 8 campo del des ed alma georgina cervantes carrascoGinna Cervantes
Las escuelas efectivas se caracterizan por tener un enfoque en la maestría del aprendizaje de los estudiantes, un ambiente ordenado y seguro, y alta expectativas para el rendimiento académico. El documento instruye al lector sobre cómo navegar la presentación mediante el uso de menús numéricos y botones para cambiar de diapositiva o salir de la presentación.
This document is a webpage from a diving school in Japan called Ocean Dream. It provides information about PADI diving certification courses offered on various dates in 2017 and 2016. It also lists diving equipment and gear available from several brands that can be purchased, along with contact information for the school and links to social media profiles.
Este documento presenta una introducción a los sistemas económicos, describiendo las economías de mercado, socialista y mixta. Explica que la economía de mercado se basa en la libertad de producción e intercambio sin intervención estatal, mientras que la economía socialista asigna al estado el control de la producción y propiedad colectiva. Finalmente, la economía mixta combina elementos de mercado y planificación estatal.
La geología es la ciencia que estudia la estructura de la Tierra y los fenómenos que han ocurrido desde su formación, incluyendo el estudio de minerales, rocas y estratos. La paleontología es el estudio de los vestigios de especies extintas de plantas y animales y cómo se relacionan con los estratos de la Tierra.
The document provides a summary of Alex de Guzman Ferrer's professional experience and qualifications. It details his current role as a Senior Failure Analysis Engineer at Fairchild Semiconductor Philippines, Inc., where he leads failure analysis projects and ensures enhanced failure analysis procedures. It also outlines his previous roles in failure analysis, reliability engineering, and as a reliability technician at Vishay Philippines and PSI Technologies. His educational background and training in failure analysis and semiconductor reliability are also summarized.
The document summarizes a Young Members Night event hosted by the Liberty Bell Chapter of ASM. The event featured a presentation on the influence and use of standards in the specialty metals industry. It thanked various organizations and individuals for their contributions to the successful event. It also announced an upcoming welding metallurgy course and a tour of Carpenter Technology's VIM unit in January 2020. Members were encouraged to volunteer and provide ideas to help the chapter.
The IEEE Code of Ethics establishes principles for professional conduct for software engineers. It outlines 8 key actions and responsibilities, including acting in the public interest, maintaining independent judgment, producing high quality products, managing software development ethically, advancing the integrity of the profession, supporting colleagues, and pursuing lifelong learning in the practice of the profession. The code is intended to provide guidance to software engineers on their ethical responsibilities.
Sylvia E. Sohn is a process engineer with expertise in microfabrication processes, materials analysis techniques, statistical process controls, and Lean Six Sigma. She has over 5 years of experience in cleanroom fabrication of optoelectronic devices, process development and improvement. Currently she works at Epitaxial Technologies fabricating APD laser devices using photolithography and other processes. Previously she conducted research on microfluidic separation systems at Johns Hopkins University and investigated toothpaste abrasives at Colgate-Palmolive. She holds an MS in chemical engineering from Johns Hopkins University and is a Lean Six Sigma Master Black Belt.
Usman Afzal is seeking a new position where he can utilize his 8 years of experience as a Test Technician Level 3 at Oxford Instruments, a market leader in X-ray analysis equipment. He has strong technical skills including operating SEM machines, soldering, troubleshooting electronics, and maintaining production standards. He is proficient in Microsoft Office, has management experience, and aims to continuously develop new skills.
This document provides a 3 sentence summary of the IEEE Guide for Safety in AC Substation Grounding:
The guide concerns grounding practices for outdoor alternating current substations, including distribution, transmission, and generating plant substations. It describes proper grounding methods to help ensure safety in substation design and operation. The guide was developed by the IEEE Power and Energy Society's Substations Committee and is intended to provide guidance, rather than quantitative analysis, on safety issues related to substation grounding.
Christopher C. Greci is seeking an engineering opportunity that allows him to advance his technical and leadership skills in reliability engineering. He has over 15 years of experience as a semiconductor reliability engineer at Analog Devices, Inc., where he developed qualification requirements, researched new technologies, supported qualifications, and led projects. Greci has an M.S. in Engineering Management from Tufts University and a B.S. in Electrical Engineering from the University of Connecticut. He has expertise in areas such as statistical analysis, semiconductor physics, and reliability testing standards.
A code of ethics outlines principles to guide professionals in conducting business honestly and with integrity. It provides rules and guidelines for ethical behavior, though it may not solve every dilemma. A compliance-based code relies on clear rules and consequences, while a value-based code requires greater self-regulation. Well-known professions like doctors, lawyers and engineers often have their own codes addressing topics like integrity, objectivity, confidentiality and competency. Implementing a code involves distributing it widely, specifying management's role, and establishing accountability measures.
Connie Justice's curriculum vita summarizes her extensive education and experience in cybersecurity and information technology. She holds a D.Sc. in Cybersecurity as well as other degrees and certifications. Her professional experience includes roles in academia, consulting, and the military. She has received several awards for her work in cybersecurity education.
This advertisement is for a tattoo removal and lightening clinic that helps people who want to change large tattoo sleeves that no longer fit their lifestyle. The clinic offers tattoo removal services to take away unwanted tattoos completely or lighten them so they can be covered up with new tattoos that better represent the person now.
Atlantex Manufacturing Corporation is celebrating its 25th anniversary as a leading U.S. manufacturer of high-temperature and abrasion-resistant protection products. The company began in 1992 in Parkesburg, PA producing knitted textiles and has since expanded its product lines and capabilities. It now produces millions of feet of protective solutions each year for industrial, automotive, defense and other applications. Atlantex has achieved success over 25 years by adhering to core values of consistent quality, helpful customer service and commitment to customer success.
El estudio comparó el nivel de felicidad entre estudiantes de Psicología y Administración en una universidad privada de Tarapoto. Se encontró que el 41% de los estudiantes de Psicología y el 28% de los de Administración reportaron un alto nivel de felicidad. Además, los estudiantes de Psicología mostraron niveles significativamente más altos de felicidad general así como en las dimensiones de sentido positivo de vida y satisfacción con la vida.
El documento describe la hidrosfera de la Tierra, explicando que el agua se encuentra en los océanos, aguas continentales, hielo polar y de montaña. Explica que el agua puede encontrarse en estado sólido, líquido o gaseoso y se mueve entre estos estados a través del ciclo del agua. Además, detalla la distribución y tipos de aguas continentales como ríos, lagos y aguas subterráneas.
The document provides an annual letter summarizing the performance of an investment portfolio in 2016, noting returns of 10.4% for the year but that the portfolio underperformed market indexes. It discusses several positions, including adding shares of easyJet after its stock price declined on Brexit uncertainty, exiting positions in Potash Corp and Aéroports de Paris, and initiating a new position in Bolloré due to its complex ownership structure hiding its true value. The outlook expresses that markets appear fully valued currently but that the portfolio has cash available from a client's home purchase to deploy into new investment opportunities as they arise.
Piso 21 es un grupo musical colombiano formado en 2007 en Medellín por cuatro amigos músicos: Juan David Castaño, David Escobar, Juan David Huertas y Pablo Mejía. El grupo se formó después de que los cuatro se conocieron en un asado y descubrieron su pasión compartida por la música. Comenzaron a ensayar en el piso 21 de un edificio desde donde podían ver toda la ciudad, y de ahí tomaron su nombre Piso 21. Desde entonces han trabajado juntos como una familia para alcanzar el éxito con su música.
Prod 8 campo del des ed alma georgina cervantes carrascoGinna Cervantes
Las escuelas efectivas se caracterizan por tener un enfoque en la maestría del aprendizaje de los estudiantes, un ambiente ordenado y seguro, y alta expectativas para el rendimiento académico. El documento instruye al lector sobre cómo navegar la presentación mediante el uso de menús numéricos y botones para cambiar de diapositiva o salir de la presentación.
This document is a webpage from a diving school in Japan called Ocean Dream. It provides information about PADI diving certification courses offered on various dates in 2017 and 2016. It also lists diving equipment and gear available from several brands that can be purchased, along with contact information for the school and links to social media profiles.
Este documento presenta una introducción a los sistemas económicos, describiendo las economías de mercado, socialista y mixta. Explica que la economía de mercado se basa en la libertad de producción e intercambio sin intervención estatal, mientras que la economía socialista asigna al estado el control de la producción y propiedad colectiva. Finalmente, la economía mixta combina elementos de mercado y planificación estatal.
La geología es la ciencia que estudia la estructura de la Tierra y los fenómenos que han ocurrido desde su formación, incluyendo el estudio de minerales, rocas y estratos. La paleontología es el estudio de los vestigios de especies extintas de plantas y animales y cómo se relacionan con los estratos de la Tierra.
La teoría de los juegos estudia las interacciones estratégicas entre agentes racionales. Se aplica en economía, ciencia política, biología y otras áreas para modelar situaciones donde el resultado depende de las decisiones de múltiples partes. La ley antimonopolio busca promover la competencia justa prohibiendo prácticas restrictivas y el abuso de poder de mercado.
May 11-12, 2016
FC340: ESD Program Development & Assessment
(ANSI/ESD S20.20 Seminar)
8:00 a.m. - 5:00 p.m.
Instructors: Kevin Duncan, Seagate Technology
David E. Swenson, Affinity Static Control Consulting, LLC
Certification: PrM
The S20.20 Seminar is intended to bring all the aspects of the Program Manager Curriculum to a
final focal point. The concepts of electrostatic control are discussed within the context of designing,
implementing and maintaining an effective ESD control program plan that meets the requirements
of the standard. Preparing a documented ESD Control Program Plan that can withstand a 3rd party
ISO9000 Certification Body is a major element of the certification process. Students are required to
participate in numerous activities in this seminar to help acquaint them with the concepts involved in
designing an ESD control program plan.
The following topics are covered in this course:
• Overview of ANSI/ESD S20.20
• How to approach an assessment
• Administrative elements
• ESD program assessment
• ESD program techniques for different applications
• Technical elements
• Overview of the assessment process
• The audit checklist and follow-up questions
May 13, 2016
FC380: Electrostatic Calculations for the Program Manager
and the ESD Engineer
8:30 a.m. - 12:00 p.m.
Instructor: Terry Welsher, Dangelmayer Associates LLC
Certification: PrM
This tutorial focuses on the basic calculations and techniques of use to the program manager and the
ESD engineer. The content is at the introductory college pre-calculus and introductory college physics
level set in the context of electrostatic discharge and its effects. It is suggested that the student gain
some familiarity with these subjects prior to the tutorial. Topics covered include the electric force, the
electric field and Coulombs law, electric potential, and voltage. Gauss’ Law is discussed as it relates
to the electric field, induction, and the Faraday cup. The capacitance in Q = CV is used to explain
charge sharing. RC decay is discussed as it relates to ESD discharge from humans, devices, wrist
straps, and materials. After completing this course, the attendee should leave with a proper understanding
of the differences among the calculations for peak current, power, energy, and threshold
voltage for a simple device.
June 29-30, 2016
ESD DEVICE DESIGN ESSENTIALS
8:00 a.m. - 5:00 p.m.
Instructors: Gianluca Boselli, Texas Instruments;
Michael Khazhinsky, Silicon Laboratories
This two-day seminar consists of concentrated versions of twelve ESDA
tutorials which comprise the ESDA Device Design Certification Program.
• ESD On-Chip Protection in Advanced Technologies
• SPICE-Based ESD Protection Design Utilizing Diodes and Active MOSFET Rail Clamp Circuits
• EOS/ESD Failure Models and Mechanisms
• On-Chip ESD Protection in RF Technologies
• Charged Device Model Phenomena and Design
• Latch-up Physics and Design
• Circuit Modeling and Simulation for On-Chip Protection
• Troubleshooting On-Chip ESD Failures
• Device Testing--IC Component Level: HBM, CDM, MM, and TLP
• Impact of Technology Scaling on ESD High Current Phenomena and Implications for Robust ESD Design
• Transmission Line Pulse Measurements: Parametric Analyzer for ESD On-Chip Protection
• System Level ESD/EMI: Testing to IEC and other Standards
June 29-30, 2016
Essentials for ESD Programs
Factory: Technologies • Controls •
Procedures
8:00 a.m. - 5:00 p.m.
Instructors: Ted Dangelmayer, Dangelmayer Associates LLC
Terry Welsher, Dangelmayer Associates LLC
This two-day seminar consists of concentrated versions of the 10 ESDA tutorials which comprise the ESDA
Program Manager (PrM) Certification Program:
• ESD Basics for the Program Manager
• Ionization and Answers for the Program Manager
• Packaging Principles for the Program Manager
• System Level ESD/EMI: Testing to IEC and other Standards
• Cleanroom Considerations for the Program Manager
• How To’s of In-Plant ESD Survey and Evaluation Measurements
• Device Technology and Failure Analysis Overview
• Electrostatic Calculations for the Program Manager and the ESD Engineer
• ESD Standards Overview for the Program Manager
• ESD Program Development & Assessment (ANSI/ESD S20.20 Seminar)
Mark Walker is a senior compliance and regulatory engineer with over 30 years of experience in the medical device industry. He has expertise in European medical device directives and international standards such as IEC 60601-1. Some of his areas of expertise include compliance, quality assurance, risk assessment, and project management. He has held compliance roles at Elekta and ITS Test & Certification and has extensive experience ensuring medical devices meet regulations.
Experience the uniquely interactive program of the IEW Workshop. IEW facilitates access to and interactions with industry leaders through invited seminars, technical sessions,
discussion groups (DGs), and invited speakers
• Listen to viewpoints of industry experts
• Share your ideas and opinions on EOS/ESD topics
• Explore industry best practices and give your inputs
• Interact/network with EOS/ESD industry experts
Don't miss the IEW Keynote
Emerging Interconnect Technologies for Nanoelectronics
Krishna Saraswat, Stanford University
Anthony J. Martini is a New Product Development Manager with over 32 years of experience in research and development, engineering design, electrical safety, and product manufacturing. He has a proven track record of managing complex domestic and global development projects, leading cross-functional teams, and ensuring regulatory compliance. Martini currently works as a Staff Compliance Engineer at Stryker Instruments, where he provides guidance to multiple R&D teams and drives the product certification process.
Our speaker this week is David Peng. David has more than 25 years of experience in the electronics industry, 15 of which were at EMS companies. At Foxconn, he led 60 R&D teams, and served as a Sony strategy product PM for more than 2 years. David's also led the product management and marketing departments at LiteOn Corp and Jabil Circuit for many years. He has rich knowledge and experience in designing products, marketing promotion, and project management. David has now established SlingX Corp. with his partner, Wade Ho, to share their experiences and contacts to provide quality services and advice to startups and entrepreneurs.
Most lectures tell startups and entrepreneurs they should follow the PLM design processes, but rarely tell them “how” to design a good product. In his talk, David wants to discuss 8 key processes in designing a product from the viewpoint of design and project management.
Brian S. Freer has over 30 years of experience in experimental science, engineering, and project management across various industries including semiconductors, materials analysis, biofuels, and physics research. He has held roles such as Principal Engineer, Principal Scientist, and Senior Systems Engineer at companies including Joule Unlimited, TEL Epion, Axcelis Technologies, and AT&T Bell Laboratories. Freer has a Bachelor of Science in Physics from MIT and is skilled in areas like experimental design, data analysis, modeling, safety procedures, and training others.
The 9th International ESD Workshop (IEW) will be held at the Granlibakken Conference Center & Lodge, Lake Tahoe, CA. Granlibakken Conference Center and Lodge, located in beautiful Lake Tahoe, provides the perfect opportunity to meet in a relaxed, invigorating atmosphere and engage in discussions about the latest issues confronting the ESD community.
The IEW will include invited seminars, technical sessions, special interest groups (SIGs), discussion groups, and invited speakers. The IEW especially invites submission of late-breaking exciting new research to stimulate discussion and interaction around new ideas, encouraging new research topics. To maintain the unique IEW experience and provide ample opportunity for informal discussions, the 2015 IEW workshop presentation format for Technical sessions will begin with each author presenting a brief summary to highlight key findings, followed by an interactive poster-based discussion session among authors and attendees. The IEW is closely aligned with the EOS/ESD Symposium for collaborative conference activities.
Abstract Submission Deadline Nov. 21, 2014
Two special attention focus issues for IEW 2015 include:
(1) Power Management EOS/ESD
The semiconductor technology development and IC design solutions that address efficient power management in systems have increased the complexity of ESD design challenges, and with expectations of solutions that also reduce cost, save space and work first time. The IEW invites contributions that address some of the ESD/EOS challenges in power management, including high performance IC on-chip power management, PMIC’s, DC/DC & AC/DC power devices, battery management, high voltage technologies and automotive applications.
(2) EDA EOS/ESD Tools Best Practices and Experiences
With the heightened emphasis on design for reliability, design flows that utilize EDA EOS/ESD verification and simulation tools continue to remain as important as ever, especially for Fabless companies that may lack direct access to manufacturing and process data. Even with Foundry rule decks, understanding how shrinking design margins can impact EOS/ESD and the best practices to consider design compromises is a challenging task. IEW provides a great open forum to share, discuss and learn from the experiences of others, particular for those in the Fabless community.
Roger Spencer has over 30 years of experience in semiconductor process engineering, holding various senior engineering and leadership roles at Intel and Digital Equipment Corporation, with expertise in semiconductor process and metrology equipment, defect analysis, and yield improvement. He holds both a BS in Electrical Engineering and Materials Science from Cornell University and an MBA from Babson College, and seeks a new position utilizing his extensive experience in product, process, and equipment engineering and management.
Bruce Gittleman has over 25 years of experience in thin film deposition, process development, and management. He holds a PhD in applied physics with a focus on thin film deposition and device manufacturing. Currently, he works as the chief scientist for a thin film lithium-ion battery startup where he is responsible for product fabrication, patent creation, and vendor relationships. Previously he has held several management and engineering roles in the semiconductor and thin film battery industries developing deposition processes, improving manufacturing equipment and operations, and resolving production issues. He has a strong background in thin film coatings, metrology, process integration, and business development.
Michael Emblin has over 30 years of experience in testing roles across various industries. He is currently a Test Engineer at L-3 TRL Technology, where he tests electronic countermeasure systems. Previously, he was a Test Engineer at ADC Communications and ARG Electrodesign, where he developed testing procedures and oversaw a lab. He has experience testing printed circuit boards, modular systems, and finished products.
Steve Orozco is seeking opportunities in semiconductor process engineering. He has a B.S. in Electrical Engineering from the University of Arizona and an Associate's degree in Engineering from Pima Community College. As a research technician at the University of Arizona Micro/Nano Fabrication Center, he has extensive experience operating and maintaining equipment for processes like deposition, etching, lithography and metrology. He has also managed administrative functions like facility safety, training and inventory. He has received an individual excellence award and his work has been acknowledged in several publications and dissertations. He provides references from professors and a facility supervisor at the University of Arizona.
This document provides strategies for integrating safety and EMC compliance considerations early in the product development process. It recommends obtaining market research information to understand target markets and applicable regulations. Designing with compliance in mind from the start can help avoid costly delays from needed modifications and retesting later. Using listed components and documenting the design process also facilitates testing and certification. Addressing compliance proactively helps get products to market faster at a lower cost.
Suitable for: 1. Technical Personnel and Decision-Makers are encouraged to participate in this training. 2. DECISION MAKERS: Technical Directors, Managers, Purchasers. 3. TECHNICAL PERSONNEL: Lecturers, Technical Sales, Marketing, Failure Analysis, Research & Development, Quality Control and Assurance, Production Engineers or Technicians. The characteristic of surface and near-surface regions of materials can be characterised by various surface analysis techniques. Applications of many engineering materials are determined by the surface and near-surface structures. Therefore, the well being of this region is essential in order to obtain a pre-required condition for those materials to be applied for a specific application. Typically, failure of engineering products may be traced back to surface/near-surface contamination or surface reconstruction. In order to obtain more information related to the failure, in-sight of these regions need to be exposed. This course is outlined to introduce basic principles of surface science, which serve as an essential foundation to explain the operation concepts and applications of several important surface analysis techniques. Know-how of interpreting the analysis data is also explained in this “easy-to-follow” and “easy-to-understand” training course. With these and the support of brief but sufficient fundamental theories, skill of selecting a relevant technique with respect to its practical engineering usage will be covered. Ultimate goal for this course is to increase level of knowledge in making a correct technical decision to solve surface related issues and transform knowledge into applications.
9th International Electrostatic Discharge Workshop – IEW 2015
The IEW provides a unique environment for envisioning, developing, and sharing robust design and test of ESD protection for state-of-the-art integrated circuits as well as advanced semiconductor system on chip (SOC) and system in package (SIP) applications.
Granlibakken Conference Center and Lodge, located in beautiful Lake Tahoe, provides an opportunity to meet in a relaxed, invigorating atmosphere.
Hsin-Hao Yeh has over 7 years of experience in semiconductor manufacturing. He has expertise in furnace and anneal processes for MOSFET, MESFET, and FINFET devices. Currently he works as a process engineer at the Global 450mm Consortium leading development of 450mm wafer processes. He previously worked at TSMC, where he led various process optimization and technology transfer projects for nodes down to 10nm. He holds a PhD in electrical engineering and masters degrees in materials science and civil engineering.
Jimmy Hsu is a senior engineer with over 8 years of experience in the semiconductor and solar industries. He has expertise in solar cell processes, silicon material properties, and semiconductor processes. He has worked for companies such as Ultratech Inc., OTB Solar BV, Industrial Technology Research Institute, and Delft University of Technology. He holds a PhD in materials science and engineering and has published patents related to carbon nanotubes.
This document is a resume for Alaa A. Elmoursi seeking a part-time faculty or adjunct professor position teaching electrical engineering, materials science, or manufacturing engineering. It summarizes his educational background including a Ph.D. in Electrical Engineering and over 30 years of experience in engineering research and management roles focusing on materials science, manufacturing technologies, and innovation.
Similar to EOS/ESD Association, Inc. Regional Tutorials in Shenzhen, China (20)
How to Build a Module in Odoo 17 Using the Scaffold MethodCeline George
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Assessment and Planning in Educational technology.pptxKavitha Krishnan
In an education system, it is understood that assessment is only for the students, but on the other hand, the Assessment of teachers is also an important aspect of the education system that ensures teachers are providing high-quality instruction to students. The assessment process can be used to provide feedback and support for professional development, to inform decisions about teacher retention or promotion, or to evaluate teacher effectiveness for accountability purposes.
EOS/ESD Association, Inc. Regional Tutorials in Shenzhen, China
1. 128September201612:00PM
Co-Sponsored by
Shenzhen HORB TECH Development Co.,Ltd.
Floor 5-7, Block B, Funing Hi-Tech Industrial Park,
No.71-2 Xintian Rd, Fuyong Town, Baoan District,
Shenzhen, China.
TEL: +86-755-29461997
FAX: +86-755-86183100
Http://www.horb.com.cn
Setting the Global Standards for Static Control!
EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA
PH +1-315-339-6937 • Email: info@esda.org • www.esda.org
EOS/ESD Association Regional Tutorials
Sponsored by Shenzhen Best-Resource Consulting Services Ltd.
March 22-24, 2017
Floor 5-7, Block B, Funing Hi-Tech Industrial Park,
No.71-2 Xintian Rd, Fuyong Town, Baoan District, Shenzhen, China.
• Learn from top industry professionals.
• ESD Association instructors who
developed the ANSI/ESD and IEC ESD
Standards bring you today’s current
information and developments.
Sponsored by
Shenzhen Best-Resource Consulting Services Ltd.
Floor 5-7, Block B, Funing Hi-Tech Industrial Park,
No.71-2 Xintian Rd, Fuyong Town, Baoan District,
Shenzhen, China.
TEL: +86-755-86182990 Hotline: 800-830-9440
FAX: +86-755-86183100
Http://www.esd-resource.com
2. Setting the Global Standards for Static Control!
EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA
PH +1-315-339-6937 • Email: info@esda.org • www.esda.org
EOS/ESDAssociation Regional Tutorials, Shenzhen, China, March 22-24, 2017
ABOUT THE INSTRUCTOR
FC361: Class 0A Devices & Boards - ESD Controls and Auditing
Measurements
9:00 a.m. - 12:30 p.m.
Instructor: Terry Welsher, Dangelmayer Associates LLC
Advanced ESD Controls and Auditing Measurements for CDM & Class 0 (ultra-sensitive) devices and Circuit Boards are not
well known and there are many technical and strategic pitfalls that must be avoided. Industry definitions (threshold levels) for
Class 0 will be described and the history of their use will be reviewed. The Class 0 category is broken down into sub-categories
of increasing risk. Students will learn how to make valid measurements, avoid common pitfalls, and how to use this data to
successfully handle Class 0 sensitivities. Advanced measurements will be described including event detection and high speed
current measurements. Students will learn when each measurement type is useful. Compelling case studies will illustrate these
techniques and the success they produce.
ESD Control procedures for Class 0 manufacturing require customization, attention to detail and a full understanding of the
technology. Thus, each company will need to develop a Class 0 ESD subject matter expert (SME) to ensure the correct and cost
effective counter measures are taken. SOPs (Special Operating Procedures) developed by SMEs will be discussed that have
proven to virtually eliminate Class 0 failures.
This tutorial will be highly interactive with live demonstrations, in-plant photographs, and video clips. Students will be encouraged
to ask questions and actively participate in the discussions. References to technical literature on ultra-sensitive devices will be
included.
FC360: Electrical Overstress (EOS) in Manufacturing and Test
1:30 p.m. - 5:00 p.m.
Instructor: Terry Welsher, Dangelmayer Associates L.L.C.
Electrical overstress (EOS) is a major cause of device failure in manufacturing and in the field. Despite this, there is relatively
little information on the sources of EOS and on prevention practices, particularly for the factory. In this tutorial, the fundamentals
of device overstress are reviewed. Relationships among device EOS stressing models, such as the Wunsch-Bell curve, are
discussed. The causes of EOS and EOS-like events in manufacturing are described and categorized by source and by stress-
type. The difficulties in distinguishing between power-induced EOS and high current ESD events such as charged-board events
(CBE) and cable discharge events (CDE) are discussed. Case histories, including failure analysis and root cause determination,
are presented and the few relevant industry specifications are reviewed.
Dr. Terry L. Welsher retired from Lucent Technologies-Bell Laboratories Engineering Research Center in 2001, as the director of the quality,
test, & reliability department. He began his career in Bell Labs in 1978; where he worked on electrical conduction mechanisms in insulat-
ing polymers and electrolytic corrosion failure mechanisms in electrical interconnection materials. In 1984, he was appointed distinguished
member of technical staff for his work in these fields. In 1986, he was promoted to technical manager to re-constitute the Bell Laboratories
core expertise in electrostatic discharge (ESD). The newly formed group proceeded to produce a string of ground-breaking contributions
to the field and played a key role in advancing industry standards. In 1994, he broadened his group’s activities to all aspects of hardware
reliability for Lucent Technologies with special emphasis in environmental stress testing (EST) and product reliability prediction and planning.
In 1997, he was promoted to director of the quality, test & reliability center of excellence where he directed the development and deploy-
ment of product quality, test and reliability assurance practices for Lucent Technologies business units. This work included design for test-
ability of integrated circuits, board and system level test and diagnosis and special techniques for testing of RF and optoelectronic systems
and components. After leaving Lucent, he became reliability director for LaserSharp Corporation, an optical fiber laser amplifier company, where he was respon-
sible for product quality, reliability, and compliance. Since 2004, he has been senior vice president of Dangelmayer Associates, LLC, an EOS/ESD consulting firm.
Dr. Welsher was chairman of the ESD Association standards committee 1988-1989. He was technical program chair in 1991, vice general chair in 1992, and general
chair in 1993 of the EOS/ESD Symposium. He served as member of the Symposium board of directors 1993-1995. He has also been active in quality standards
and road mapping activities with Sematech, the EOS/ESD Association, and the JEDEC 14 quality and reliability committee. He served on the board of directors of
JEDEC 1999-2001. He is currently co-chair of the joint JEDEC/ESDA HBM and CDM ESD working groups, president of the EOS/ESD Association, and a mem-
ber of the advisory board of iNARTE, a telecommunications technical certification organization. Recently, he has led the effort to harmonize and merge JEDEC
and ESDA device testing standards. He holds a BS in chemistry from Florida State University and a PhD in chemical physics from the University of Texas at
Austin. He is author or co-author of fifty papers in solid state physics, applied mathematics, organic chemistry, electronics reliability, and electrostatic discharge.
MARCH 22, 2017
3. Setting the Global Standards for Static Control!
EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA
PH +1-315-339-6937 • Email: info@esda.org • www.esda.org
EOS/ESDAssociation Regional Tutorials, Shenzhen, China, March 22-24, 2017
ABOUT THE INSTRUCTORS
FC340: ESD Program Development and Assessment (ANSI/ESD
S20.20 Seminar)
9:00 a.m. - 5:00 p.m.
Instructors: Ron Gibson, Advanced Static Control Consulting (ASCC); John Kinnear, IBM
Certification: PrM
This seminar provides instruction on designing and implementing an ESD control program based on ANSI/ESD
S20.20. The course provides participants with the tools and techniques to prepare for an ESD facility audit. This
two-day course is an ESDA certification requirement for in-plant auditors and program managers who are working
toward professional ESD certification. Current changes to ANSI/ESD S20.20 will be discussed and presented
The following topics are covered in this course:
• Overview of ANSI/ESD S20.20
• How to approach an assessment
• Administrative elements
• ESD program assessment
• ESD program techniques for different applications
• Technical elements
• Overview of the assessment process
• The audit checklist and follow-up questions
Ron Gibson is the president of Advanced Static Control Consulting (ASCC), which was founded in 2010. ASCC provides consulting, ESD
material and product qualification, and develops ESD training programs for clients. From 1994 to 2010 Ron was the corporate ESD pro-
gram manager for Celestica International, Inc. and was responsible for the ESD control programs at all of Celestica’s factories worldwide.
From 1979 to 1994 Ron worked for IBM. Ron co-authored IBM’s initial factory ESD standards. Ron has been a member of the ESD As-
sociation (ESDA) since 1988, and has served as an officer in the positions of president, senior vice president, vice president, secretary,
and treasurer. He has also served as chairman of the ESDA Standards Committee (STDCOM) for over 10 years and as the first chair-
man of the ESDA certification business unit. Gibson is an iNARTE certified electrostatic discharge control engineer, an ESDA certi-
fied instructor for the program manager certification program, and is a certified chief ESD coordinator for the Reliability Center of Japan.
John Kinnear is an IBM senior engineer specializing in process & system technology, and facility certification in accordance with ANSI/
ESD S20.20. He has a BS degree from University of Buffalo and a MS degree from Syracuse University. John is well known globally for
his technical contributions to national and international standards. He has been the IBM ESD site coordinator for the Poughkeepsie site
since 1989. He is past chairman of the IBM inter-divisional technical liaison committee for ESD protection and is an important member of
his company’s committee to develop and implement the ESD corporate program for IBM. John has coordinated the testing of large main-
frames for compliance to EMC, safety, environmental, shipping, and volatile organic emission standards. He has also been the lead en-
gineer on testing large mainframe systems to EMC emissions and immunity standards for FCC, CE Mark, VCCI, and other national re-
quirements. As a member of the ESD Association since 1990, John has served in several standards development committees as well
as association management positions. John is the appointed technical adviser to the United States National Committee/IEC technical
committee 101, where he represents the United States to the International Electrotechnical Commission (IEC). In this position he assist-
ed in the evolution of international ESD standards and supports international adoption of ANSI/ESD S20.20. As chair of the ESDA’s facility certification (ANSI/
ESD S20.20) development program, John played major roles in the program’s development and industry launch. In particular, John coordinated the initial devel-
opment of lead assessor training, ISO registrar certification, and witness audits. John has served in every ESD Association officer’s position, including vice presi-
dent, senior vice president, and president. He is the past chairman of the EOS/ESD Symposium technical program committee and past general chairman of the
2004 EOS/ESD Symposium. For his contributions to the ESD Association, John was presented with the Outstanding Contribution award in September 2006..
This seminar is intended to provide the student with the necessary understanding of
the principles involved in ANSI/ESD S20.20, to allow the development of an ESD Control
Program Plan that minimizes the risk of damage to sensitive items. In-class discussions
cover real life ESD program problems and solutions.
MARCH 23-24, 2017
4. 428September201612:00PM
REGISTRATION
Please Print or Type (Your name and company will appear on badge and/or certificate exactly as written below.)
EOS/ESDAssociation Regional Tutorials, Shenzhen, China, March 22-24, 2017
Shenzhen BEST-RESOURCE Consulting Co.,Ltd.
Floor 5-7, Block B, Funing Hi-Tech Industrial Park, No.71-2 Xintian Rd, Fuyong Town
Baoan District, Shenzhen, China.
Payment • Company purchase orders not accepted.
Registration Information
For credit card payments:
Register online at:
ESD Association
http://www.esda.org/events/calendar/
Phone: +1 (315) 339-6937
Email: info@esda.org
For other forms of payment Contact:
Shenzhen BEST-RESOURCE Consulting Co.,Ltd.
Flr 5-7, Block B, Funing Hi-Tech Industrial Park, No.71-2 Xintian
Rd, Fuyong Town, Baoan District, Shenzhen, China.
TEL: +86-755-86182990
FAX: +86-755-86183100
Http://www.esd-resource.com
Email: vip.customer@esd-resource.com
Last Name: First Name:
Company Name:
Street: City:
State/Province: Country: Zip/Postal Code:
Phone: Email:
Setting the Global Standards for Static Control!
EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA
PH +1-315-339-6937 • Email: info@esda.org • www.esda.org
Register Online at www.esda.org/events/calendar/
Tutorials March22-24,2017 6650 RMB /1020 USD
Payment Information
Credit card number: Security code:
Name on card: Expiration date:
Cardholder’s signature:
Billing Address
City: State: Zip/Postal Code: