ENGINEERING THERMODYNAMICS- unit-3
•
0 likes•24 views
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Report
Share
Report
Share
Download to read offline
Recommended
UNIT-1-Steam Power Plant.pptx
Layout of modern coal power plant, super critical boilers, FBC boilers, coal handling, pulveriser, ash handling and types of draught – surface condenser types – cooling towers – binary cycles – cogeneration system
Unit-V-Power Plant Economics and Environment.pptx
Power tariff types, load distribution parameters, load curve – comparison of site selection criteria – relative merits and demerits – capital and operating cost of different power plants – pollution control technologies including waste disposal options for coal and nuclear power plants.
Unit-IV-Renewable Energy Sources.pptx
Hydro electric power plants: typical layout and associated components – Principle, construction and working of wind, tidal, Solar Photo Voltaic (SPV), solar thermal, geo thermal, biogas and fuel cell power systems.
Unit-II-Diesel Gas turbine and Combined Cycle Power Plant.pptx
Diesel power plant: layout, components – Gas turbine power plant: open and closed cycles, gas turbine plant improvisation methods – Combined cycle power plants – Integrated gasifier based combined cycle systems.
Unit-III-Nuclear Power Plants.pptx
working of nuclear reactors: Boiling Water Reactor (BWR), Pressurized Water Reactor (PWR), Canada Deuterium - Uranium reactor (CANDU), breeder, gas cooled and liquid metal cooled reactors – safety measures for nuclear power plants.
UNIT-IV-STEERING, BRAKES AND SUSPENSION SYSTEMS.pptx
This document provides information on steering, brakes, and suspension systems. It describes the key components and functions of each system. The steering system section outlines components like the steering wheel, linkage, and gear and how they work together to steer the vehicle. Brake components like drums, discs, and pneumatic/hydraulic systems are defined. Finally, suspension and ABS are covered, identifying springs, dampers, levels of weight, and advanced driver assistance features.
UNIT-II-ENGINE AUXILIARY SYSTEMS.pptx
Electronically controlled gasoline injection system for SI engines – Electronically controlled diesel injection system – unit injector system, rotary distributor type and common rail direct injection system – Electronic ignition system: transistorized coil ignition system, capacitive discharge ignition system – Turbochargers - waste gate turbocharger, variable geometry turbocharger – engine emission control by three way catalytic converter system – emission norms (Euro, BS).
UNIT-V-ELECTRIC AND HYBRID VEHICLES.pptx
Electric Vehicles: History of electric vehicles - components of electric vehicle - layout & working of electric vehicles – comparison with internal combustion engine - advantages and disadvantages of EV.
Hybrid Vehicles: Components of hybrid vehicles – layout & working principle of hybrid vehicles - comparison with electric vehicles - advantages and disadvantages of hybrid vehicles.
Recommended
UNIT-1-Steam Power Plant.pptx
Layout of modern coal power plant, super critical boilers, FBC boilers, coal handling, pulveriser, ash handling and types of draught – surface condenser types – cooling towers – binary cycles – cogeneration system
Unit-V-Power Plant Economics and Environment.pptx
Power tariff types, load distribution parameters, load curve – comparison of site selection criteria – relative merits and demerits – capital and operating cost of different power plants – pollution control technologies including waste disposal options for coal and nuclear power plants.
Unit-IV-Renewable Energy Sources.pptx
Hydro electric power plants: typical layout and associated components – Principle, construction and working of wind, tidal, Solar Photo Voltaic (SPV), solar thermal, geo thermal, biogas and fuel cell power systems.
Unit-II-Diesel Gas turbine and Combined Cycle Power Plant.pptx
Diesel power plant: layout, components – Gas turbine power plant: open and closed cycles, gas turbine plant improvisation methods – Combined cycle power plants – Integrated gasifier based combined cycle systems.
Unit-III-Nuclear Power Plants.pptx
working of nuclear reactors: Boiling Water Reactor (BWR), Pressurized Water Reactor (PWR), Canada Deuterium - Uranium reactor (CANDU), breeder, gas cooled and liquid metal cooled reactors – safety measures for nuclear power plants.
UNIT-IV-STEERING, BRAKES AND SUSPENSION SYSTEMS.pptx
This document provides information on steering, brakes, and suspension systems. It describes the key components and functions of each system. The steering system section outlines components like the steering wheel, linkage, and gear and how they work together to steer the vehicle. Brake components like drums, discs, and pneumatic/hydraulic systems are defined. Finally, suspension and ABS are covered, identifying springs, dampers, levels of weight, and advanced driver assistance features.
UNIT-II-ENGINE AUXILIARY SYSTEMS.pptx
Electronically controlled gasoline injection system for SI engines – Electronically controlled diesel injection system – unit injector system, rotary distributor type and common rail direct injection system – Electronic ignition system: transistorized coil ignition system, capacitive discharge ignition system – Turbochargers - waste gate turbocharger, variable geometry turbocharger – engine emission control by three way catalytic converter system – emission norms (Euro, BS).
UNIT-V-ELECTRIC AND HYBRID VEHICLES.pptx
Electric Vehicles: History of electric vehicles - components of electric vehicle - layout & working of electric vehicles – comparison with internal combustion engine - advantages and disadvantages of EV.
Hybrid Vehicles: Components of hybrid vehicles – layout & working principle of hybrid vehicles - comparison with electric vehicles - advantages and disadvantages of hybrid vehicles.
UNIT-1-VEHICLE STRUCTURE AND ENGINES.ppt
Types of automobiles – vehicle construction and different layouts – chassis, frame and body – resistances to vehicle aerodynamics (various resistances and moments involved) – IC engines - components, functions and materials – Variable Valve Timing (VVT).
UNIT-III-TRANSMISSION SYSTEMS.pptx
The document discusses various components of automobile transmission systems. It describes the purpose of a transmission as enabling smooth engagement and disengagement of the engine from the driving wheels. The main components discussed are the clutch, gearbox, transfer box, and fluid flywheel. The clutch connects or disconnects the engine from the transmission. The gearbox utilizes different gears to increase or decrease speed and torque delivered to the wheels. A transfer box distributes torque to all four wheels in 4-wheel drive vehicles. A fluid flywheel acts as a cushion to absorb shocks between the engine and transmission.
AICE-Unit 3
The document discusses engine exhaust emissions, including the formation of nitrogen oxides, hydrocarbons, carbon monoxide, and particulate emissions. It describes methods for controlling these emissions, such as three-way catalytic converters and particulate traps. The document also covers equipment for measuring emissions of hydrocarbons, carbon monoxide, nitrogen oxides, smoke, and particulate matter. These include chemiluminescence, NDIR, and flame ionization methods for gases, as well as obscuration, continuous filter, Hartridge smokemeter, spot filtering, and Bosch smokemeter techniques for smoke and particulate measurements.
AICE-Unit 2
The document discusses diesel fuel injection systems and combustion in compression ignition engines. It covers the stages of combustion (ignition lag, rapid combustion, controlled combustion, after burning), factors that affect ignition delay and knocking, different combustion chamber designs (direct injection, indirect injection), fuel spray behavior, and the role of air motion within the cylinder. Turbocharging is introduced as a way to compress more air into the cylinder before fuel injection, enabling increased power output and efficiency.
AICE-Unit 5
The document discusses recent trends in vehicle engines and technologies including air assisted combustion, homogeneous charge compression ignition engines, variable geometry turbochargers, common rail direct injection systems, hybrid electric vehicles, NOx adsorbers, and onboard diagnostics. It describes homogeneous charge compression ignition engines which auto-ignite compressed fuel and air, common rail direct injection systems, and the three types of hybrid electric vehicle systems: series, parallel, and series-parallel.
AICE-Unit 4
This document discusses alternative fuels to gasoline such as alcohols, vegetable oils, biodiesel, biogas, natural gas, liquefied petroleum gas, and hydrogen. It covers the properties, suitability, merits and demerits of these fuels, and any engine modifications needed to use them. Specifically, it examines using these fuels in spark ignition and compression ignition engines, and their effects on performance measures like brake power, fuel consumption, and emissions.
AICE-Unit 1
The document discusses spark ignition engines. It covers mixture requirements, fuel injection systems including monopoint, multipoint, and direct injection. It describes the stages of normal and abnormal combustion as well as factors that affect knocking. It also discusses combustion chambers and their role in smooth engine operation and high power output.
PRODUCTION PLANNING AND CONTROL-Unit 1
This document discusses production planning and control. It outlines several key objectives of production planning including minimizing costs and inventory while maximizing customer service and production efficiency. The document then describes different types of production systems like continuous, job-based, and intermittent production. It also discusses important aspects of production like product design, development, marketing, functional operations, aesthetics, and profit considerations. Standardization, simplification, and break-even analysis are also covered as important strategies for production.
PRODUCTION PLANNING AND CONTROL-Unit 2
The document discusses work study and method study. It describes the basic procedures for method study which include selecting work to study, recording the existing method, examining the facts critically, developing a more efficient method, defining the new method, installing it, and maintaining it. It provides examples of different types of charts that can be used for process recording like operation process charts, flow process charts, two-handed process charts, and multiple activity charts. It also discusses principles of motion economy for efficient work methods.
PRODUCTION PLANNING AND CONTROL-Unit 3
Product planning identifies market requirements to define a product's features. It serves as the basis for pricing, distribution, and promotion decisions. Value analysis aims to increase value, defined as function over cost, by improving function or reducing cost. Lack of product planning can lead to unsatisfied customers, quality issues, and loss of brand name. Process planning involves routing, scheduling, dispatching, and follow up based on product information, processes, capacity, orders, due dates, and resources. Economic batch quantity determines the optimal batch size to minimize average costs by balancing setup costs and inventory holding costs.
PRODUCTION PLANNING AND CONTROL-Unit 4
The document discusses various production planning and scheduling functions including scheduling, loading, sequencing, expediting, Gantt charts, line of balance, linear scheduling method, batch production scheduling, MRP, kanban, dispatching, progress reporting, and manufacturing lead time. Scheduling determines when operations are performed and works are completed. Loading adds total operation times to planned workstation utilization. Sequencing and dispatching authorize starting operations. Expediting ensures plans meet commitments.
PRODUCTION PLANNING AND CONTROL-Unit 5
Inventory control aims to ensure adequate supply without excessive overstock. It answers questions about when to order, where to store inventory, and how much to order. Two common inventory management techniques are the two-bin system and economic order quantity (EOQ) modeling, which help determine optimal order sizes and quantities. ABC analysis categorizes inventory items into A, B, and C groups to apply different control and recordkeeping policies based on importance and value.
ENGINEERING THERMODYNAMICS- unit 2
The document is a scanned copy of a contract for the sale of real estate. It outlines the terms of sale for a residential property located in California, including the purchase price, down payment, financing terms, contingencies, and other standard clauses. The buyer and seller signatures indicate they have agreed to the terms laid out in the contract.
ENGINEERING THERMODYNAMICS-UNIT 1
This document provides an introduction to engineering thermodynamics. It defines key concepts like systems, properties, processes, and the first law of thermodynamics. Specific topics covered include the classification of thermodynamic systems as closed or open, homogeneous or heterogeneous. The document also discusses intensive and extensive properties, pressure, temperature, and the gas laws of Boyle, Charles, and Gay-Lussac. Common thermodynamic processes like isothermal, isobaric, isochoric, and adiabatic processes are defined. The first law of thermodynamics relating heat, work, and changes in internal energy is stated.
ENGINEERING THERMODYNAMICS-UNIT 1
Thermodynamics deals with the conversion of energy from one form to another, mainly heat into work or vice versa. Some applications of thermodynamics include power generation, automobiles, processing industries, and gas compressors. The four main laws of thermodynamics are: (1) the zeroth law defines thermal equilibrium, (2) the first law concerns the conservation of energy and states that heat and work are different forms of energy transfer, (3) the second law concerns the entropy of the universe increasing, and (4) the third law relates entropy and the absolute zero of temperature. Thermodynamic properties can be either intensive, which do not depend on system size, or extensive, which do depend on system size. Ther
ENGINEERING THERMODYNAMICS-UNIT 1
This document provides an introduction to basic thermodynamics concepts. It defines key terms like system, surroundings, boundary, types of systems (closed, open, isolated). It describes the macroscopic and microscopic approaches in thermodynamics. The main thermodynamic properties discussed are intensive and extensive properties, with examples like pressure, temperature, volume, etc. It also covers concepts like continuum, state functions, phases, and control volume.
ENGINEERING THERMODYNAMICS-UNIT 1
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
POWER PLANT ENGINEERING-Unit 4
This document provides information on various renewable energy sources including hydroelectric, wind, solar, tidal, geothermal, and biofuel power systems. It discusses the basic principles and components of each type of system. For hydroelectric power, it describes how water is used to convert potential energy to kinetic energy and then mechanical energy to power a generator. For wind power, it discusses wind turbine design and the factors that determine power output. It also summarizes different solar technologies like photovoltaics, solar thermal, and concentrators. For geothermal, it outlines different plant designs depending on water temperature. Biogas production from anaerobic digestion is also summarized. Fuel cells are introduced as another renewable technology.
POWER PLANT ENGINEERING-Unit 3
The document provides information on various topics related to nuclear power plants, including:
1) Nuclear fuels commonly used in power plants such as uranium-235 and plutonium-239.
2) Key components of nuclear power plants including the fuel, moderators, control rods, shielding, coolant, turbines, and safety systems.
3) Different types of nuclear reactors including boiling water reactors, pressurized water reactors, CANDU reactors, and fast breeder reactors.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
More Related Content
More from prakash0712
UNIT-1-VEHICLE STRUCTURE AND ENGINES.ppt
Types of automobiles – vehicle construction and different layouts – chassis, frame and body – resistances to vehicle aerodynamics (various resistances and moments involved) – IC engines - components, functions and materials – Variable Valve Timing (VVT).
UNIT-III-TRANSMISSION SYSTEMS.pptx
The document discusses various components of automobile transmission systems. It describes the purpose of a transmission as enabling smooth engagement and disengagement of the engine from the driving wheels. The main components discussed are the clutch, gearbox, transfer box, and fluid flywheel. The clutch connects or disconnects the engine from the transmission. The gearbox utilizes different gears to increase or decrease speed and torque delivered to the wheels. A transfer box distributes torque to all four wheels in 4-wheel drive vehicles. A fluid flywheel acts as a cushion to absorb shocks between the engine and transmission.
AICE-Unit 3
The document discusses engine exhaust emissions, including the formation of nitrogen oxides, hydrocarbons, carbon monoxide, and particulate emissions. It describes methods for controlling these emissions, such as three-way catalytic converters and particulate traps. The document also covers equipment for measuring emissions of hydrocarbons, carbon monoxide, nitrogen oxides, smoke, and particulate matter. These include chemiluminescence, NDIR, and flame ionization methods for gases, as well as obscuration, continuous filter, Hartridge smokemeter, spot filtering, and Bosch smokemeter techniques for smoke and particulate measurements.
AICE-Unit 2
The document discusses diesel fuel injection systems and combustion in compression ignition engines. It covers the stages of combustion (ignition lag, rapid combustion, controlled combustion, after burning), factors that affect ignition delay and knocking, different combustion chamber designs (direct injection, indirect injection), fuel spray behavior, and the role of air motion within the cylinder. Turbocharging is introduced as a way to compress more air into the cylinder before fuel injection, enabling increased power output and efficiency.
AICE-Unit 5
The document discusses recent trends in vehicle engines and technologies including air assisted combustion, homogeneous charge compression ignition engines, variable geometry turbochargers, common rail direct injection systems, hybrid electric vehicles, NOx adsorbers, and onboard diagnostics. It describes homogeneous charge compression ignition engines which auto-ignite compressed fuel and air, common rail direct injection systems, and the three types of hybrid electric vehicle systems: series, parallel, and series-parallel.
AICE-Unit 4
This document discusses alternative fuels to gasoline such as alcohols, vegetable oils, biodiesel, biogas, natural gas, liquefied petroleum gas, and hydrogen. It covers the properties, suitability, merits and demerits of these fuels, and any engine modifications needed to use them. Specifically, it examines using these fuels in spark ignition and compression ignition engines, and their effects on performance measures like brake power, fuel consumption, and emissions.
AICE-Unit 1
The document discusses spark ignition engines. It covers mixture requirements, fuel injection systems including monopoint, multipoint, and direct injection. It describes the stages of normal and abnormal combustion as well as factors that affect knocking. It also discusses combustion chambers and their role in smooth engine operation and high power output.
PRODUCTION PLANNING AND CONTROL-Unit 1
This document discusses production planning and control. It outlines several key objectives of production planning including minimizing costs and inventory while maximizing customer service and production efficiency. The document then describes different types of production systems like continuous, job-based, and intermittent production. It also discusses important aspects of production like product design, development, marketing, functional operations, aesthetics, and profit considerations. Standardization, simplification, and break-even analysis are also covered as important strategies for production.
PRODUCTION PLANNING AND CONTROL-Unit 2
The document discusses work study and method study. It describes the basic procedures for method study which include selecting work to study, recording the existing method, examining the facts critically, developing a more efficient method, defining the new method, installing it, and maintaining it. It provides examples of different types of charts that can be used for process recording like operation process charts, flow process charts, two-handed process charts, and multiple activity charts. It also discusses principles of motion economy for efficient work methods.
PRODUCTION PLANNING AND CONTROL-Unit 3
Product planning identifies market requirements to define a product's features. It serves as the basis for pricing, distribution, and promotion decisions. Value analysis aims to increase value, defined as function over cost, by improving function or reducing cost. Lack of product planning can lead to unsatisfied customers, quality issues, and loss of brand name. Process planning involves routing, scheduling, dispatching, and follow up based on product information, processes, capacity, orders, due dates, and resources. Economic batch quantity determines the optimal batch size to minimize average costs by balancing setup costs and inventory holding costs.
PRODUCTION PLANNING AND CONTROL-Unit 4
The document discusses various production planning and scheduling functions including scheduling, loading, sequencing, expediting, Gantt charts, line of balance, linear scheduling method, batch production scheduling, MRP, kanban, dispatching, progress reporting, and manufacturing lead time. Scheduling determines when operations are performed and works are completed. Loading adds total operation times to planned workstation utilization. Sequencing and dispatching authorize starting operations. Expediting ensures plans meet commitments.
PRODUCTION PLANNING AND CONTROL-Unit 5
Inventory control aims to ensure adequate supply without excessive overstock. It answers questions about when to order, where to store inventory, and how much to order. Two common inventory management techniques are the two-bin system and economic order quantity (EOQ) modeling, which help determine optimal order sizes and quantities. ABC analysis categorizes inventory items into A, B, and C groups to apply different control and recordkeeping policies based on importance and value.
ENGINEERING THERMODYNAMICS- unit 2
The document is a scanned copy of a contract for the sale of real estate. It outlines the terms of sale for a residential property located in California, including the purchase price, down payment, financing terms, contingencies, and other standard clauses. The buyer and seller signatures indicate they have agreed to the terms laid out in the contract.
ENGINEERING THERMODYNAMICS-UNIT 1
This document provides an introduction to engineering thermodynamics. It defines key concepts like systems, properties, processes, and the first law of thermodynamics. Specific topics covered include the classification of thermodynamic systems as closed or open, homogeneous or heterogeneous. The document also discusses intensive and extensive properties, pressure, temperature, and the gas laws of Boyle, Charles, and Gay-Lussac. Common thermodynamic processes like isothermal, isobaric, isochoric, and adiabatic processes are defined. The first law of thermodynamics relating heat, work, and changes in internal energy is stated.
ENGINEERING THERMODYNAMICS-UNIT 1
Thermodynamics deals with the conversion of energy from one form to another, mainly heat into work or vice versa. Some applications of thermodynamics include power generation, automobiles, processing industries, and gas compressors. The four main laws of thermodynamics are: (1) the zeroth law defines thermal equilibrium, (2) the first law concerns the conservation of energy and states that heat and work are different forms of energy transfer, (3) the second law concerns the entropy of the universe increasing, and (4) the third law relates entropy and the absolute zero of temperature. Thermodynamic properties can be either intensive, which do not depend on system size, or extensive, which do depend on system size. Ther
ENGINEERING THERMODYNAMICS-UNIT 1
This document provides an introduction to basic thermodynamics concepts. It defines key terms like system, surroundings, boundary, types of systems (closed, open, isolated). It describes the macroscopic and microscopic approaches in thermodynamics. The main thermodynamic properties discussed are intensive and extensive properties, with examples like pressure, temperature, volume, etc. It also covers concepts like continuum, state functions, phases, and control volume.
ENGINEERING THERMODYNAMICS-UNIT 1
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
POWER PLANT ENGINEERING-Unit 4
This document provides information on various renewable energy sources including hydroelectric, wind, solar, tidal, geothermal, and biofuel power systems. It discusses the basic principles and components of each type of system. For hydroelectric power, it describes how water is used to convert potential energy to kinetic energy and then mechanical energy to power a generator. For wind power, it discusses wind turbine design and the factors that determine power output. It also summarizes different solar technologies like photovoltaics, solar thermal, and concentrators. For geothermal, it outlines different plant designs depending on water temperature. Biogas production from anaerobic digestion is also summarized. Fuel cells are introduced as another renewable technology.
POWER PLANT ENGINEERING-Unit 3
The document provides information on various topics related to nuclear power plants, including:
1) Nuclear fuels commonly used in power plants such as uranium-235 and plutonium-239.
2) Key components of nuclear power plants including the fuel, moderators, control rods, shielding, coolant, turbines, and safety systems.
3) Different types of nuclear reactors including boiling water reactors, pressurized water reactors, CANDU reactors, and fast breeder reactors.
More from prakash0712 (20)
Recently uploaded
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Recently uploaded (20)
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...