EnOcean
•Download as PPTX, PDF•
0 likes•564 views
The document provides an introduction and demonstration of EnOcean wireless products from Dwyer Instruments, including sensors, switches, and controllers that integrate with building automation systems. It communicates using energy-harvesting, ultra-low power wireless technology on 868 and 902 MHz bands. The demonstration shows wireless temperature and humidity transmitters, as well as a wireless USB receiver, with pricing of $125 for temperature-only and $175 for temperature and humidity sensors.
Report
Share
Report
Share
Recommended
opto1st
This document provides an overview of fiber optics, including what fiber optics is, the key elements, and some advantages and disadvantages. Fiber optics involves the transmission of data as light pulses through optical fibers, which works by converting electronic signals to light using a transmitter at one end and receiving the light back as electronic signals using a photodetector at the other end. The key elements that enable this include optical fibers made of glass or plastic to guide the light, as well as transmitters like LEDs and lasers, and receivers like photodiodes. Major advantages of fiber optics include large bandwidth, low signal loss over long distances, immunity to electromagnetic interference, compact size, and security. Some disadvantages include higher costs of fibers and connectors
EEP-EnOcean Profiles v02.00
The document describes EnOcean equipment profiles which define standardized radio protocols for wirelessly transmitting sensor and control data. It outlines the protocol layers including the physical radio signal properties, encoding of telegrams, and application data interpretation. Specific profile definitions are given for sensor types like temperature, light, occupancy, and control devices for switches, thermostats, and operating panels.
Pressure Transmitters
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
Gas Mass Flowmeters
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
Series IEFS Insertion Electromagnetic Flow Sensor
This document provides information about materials from Dwyer Instruments, Inc. for potential customers and current employees. It states that the materials may not be reproduced, published, or transmitted electronically without permission and that Dwyer Instruments' name, likeness, product names, and logos may not be used without written permission. The document then introduces Dwyer Instruments' Insertion Flowmeter Series IEFS and provides details about its operation, benefits, applications and example insertion sensor applications.
Humidity/ Temperature Transmitters
This document discusses Dwyer Instruments' humidity and temperature transmitters, including their various mounting configurations, sensor specifications, applications, and contact information for ordering or getting more information. The transmitters can be mounted in ducts, on walls, outdoors, or remotely and measure humidity, temperature, or both for various HVAC and building automation applications.
Thermo-Anomometer, Air Flow Sensors, and the Air Flow Hood
This document provides information on various air flow measurement products from Dwyer Instruments, including air flow hoods, thermo-anemometers, duct-mounted stations, pitot tubes, averaging flow grids, averaging flow sensors, and air flow measuring probes. It describes features and benefits of each product such as accuracy, data storage and display capabilities, materials, and ease of installation.
Pressure and Flow Switches used in Building Automation Systems
The document discusses Dwyer Instruments pressure and flow switches for building automation systems (BAS), including the Series ADPS differential pressure switch and the Series FS-2 water flow switch, outlining their features, specifications, applications, and contact information for ordering catalogs.
Recommended
opto1st
This document provides an overview of fiber optics, including what fiber optics is, the key elements, and some advantages and disadvantages. Fiber optics involves the transmission of data as light pulses through optical fibers, which works by converting electronic signals to light using a transmitter at one end and receiving the light back as electronic signals using a photodetector at the other end. The key elements that enable this include optical fibers made of glass or plastic to guide the light, as well as transmitters like LEDs and lasers, and receivers like photodiodes. Major advantages of fiber optics include large bandwidth, low signal loss over long distances, immunity to electromagnetic interference, compact size, and security. Some disadvantages include higher costs of fibers and connectors
EEP-EnOcean Profiles v02.00
The document describes EnOcean equipment profiles which define standardized radio protocols for wirelessly transmitting sensor and control data. It outlines the protocol layers including the physical radio signal properties, encoding of telegrams, and application data interpretation. Specific profile definitions are given for sensor types like temperature, light, occupancy, and control devices for switches, thermostats, and operating panels.
Pressure Transmitters
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
Gas Mass Flowmeters
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
Series IEFS Insertion Electromagnetic Flow Sensor
This document provides information about materials from Dwyer Instruments, Inc. for potential customers and current employees. It states that the materials may not be reproduced, published, or transmitted electronically without permission and that Dwyer Instruments' name, likeness, product names, and logos may not be used without written permission. The document then introduces Dwyer Instruments' Insertion Flowmeter Series IEFS and provides details about its operation, benefits, applications and example insertion sensor applications.
Humidity/ Temperature Transmitters
This document discusses Dwyer Instruments' humidity and temperature transmitters, including their various mounting configurations, sensor specifications, applications, and contact information for ordering or getting more information. The transmitters can be mounted in ducts, on walls, outdoors, or remotely and measure humidity, temperature, or both for various HVAC and building automation applications.
Thermo-Anomometer, Air Flow Sensors, and the Air Flow Hood
This document provides information on various air flow measurement products from Dwyer Instruments, including air flow hoods, thermo-anemometers, duct-mounted stations, pitot tubes, averaging flow grids, averaging flow sensors, and air flow measuring probes. It describes features and benefits of each product such as accuracy, data storage and display capabilities, materials, and ease of installation.
Pressure and Flow Switches used in Building Automation Systems
The document discusses Dwyer Instruments pressure and flow switches for building automation systems (BAS), including the Series ADPS differential pressure switch and the Series FS-2 water flow switch, outlining their features, specifications, applications, and contact information for ordering catalogs.
Model DAFA Air Flow Indicator and Alarm
The Model DAFA Air Flow Indicator and Alarm alerts users of low or no air flow conditions in pipes utilizing a thin, field trimmable vane to sense the air flow rate. An 85 dB audible buzzer alternates with a bright red LED to alert users when the air flow rate drops, indicating low or no flow in the pipe. The DAFA is battery powered to provide versatility for where it can be installed, and offers a yellow LED to indicate a low battery. This device is ideal for monitoring radon mitigation systems by detecting a loss of air flow in the pipe and providing a signal to homeowners if the fan has stopped operating.
To place an order or learn more, please visit the Dwyer website at https://dwyer-inst.com/modeldafa.html
Series PMT2 Particulate Transmitter
The Series PMT2 is a transmitting device that senses the current generated by particles as they pass by the sensing probe. The current level is correlated to the amount of particles in the air stream, and thus the PMT2 output (4-20mA loop signal) can provide a representation of the particulate in the duct.
Learn more or order at https://dwyer-inst.com/series-pmt2-particulate-transmitter.html
Series WE08 2-Piece NPT Brass Ball Valve
The Series WE08 incorporates a full port 2-piece brass ball valve for great flow rates with minimal pressure drop. The valve features a blowout proof stem for added safety, reinforced PTFE seats and seals for longer life, and a brass ball for better performance. Actuators are direct mounted creating a compact assembly for tight spaces. The Series WE08 can be configured with either an electric or pneumatic actuator. Electric actuators are available in weatherproof or explosion-proof, a variety of supply voltages, and two-position or modulating control. Two-position actuators use the supply voltage to drive the valve open or closed, while the modulating actuator accepts a 4 to 20 mA input for valve positioning. Actuators feature thermal overload protection and permanently lubricated gear train.
The pneumatic double acting actuator uses an air supply to drive the valve open and closed. The actuator has two supply ports, with one driving the valve open and the other driving the valve closed. Spring return pneumatic actuators use the air supply to open the valve and internally loaded springs return the valve to the closed position. Also, between the air supply ports for opening and closing the valve, actuators are constructed of anodized and epoxy coated aluminum for years of corrosion free service.
To place an order or learn more, please visit the Dwyer website at https://dwyer-inst.com/serieswe08.html
Series DP3 Wireless Differential Pressure Manometer
The Series DP3 Wireless Differential Pressure Manometer is a compact, highly accurate, auto-ranging differential pressure manometer ideal for low flow applications. The Series DP3 is used in conjunction with the Dwyer Mobile Meter® application software to view pressure drop across filters, static pressure in ducts, and velocity pressures from pitot tubes or air flow stations.
Learn more or order at https://dwyer-inst.com/series-dp3.html
Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter
The Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter is available in a variety of materials including PVC, Aluminum, Brass, or 316 stainless steel. The variety of optional materials allows the flowmeters to be used in many different applications. The Series INSITE Flowmeters are also available with an optional field adjustable reed switch for high and low alarms.
To learn more about the Series IS/TX/PX INSITE™ Flowmeter, please visit the Dwyer website at: https://www.dwyer-inst.com/Product/SeriesIS-PX-TX
Series CDT / CDTR / CDTV / CDTA Carbon Dioxide/Temperature Transmitters
Dwyer Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. For increased sensor accuracy, a single beam dual wavelength nondispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied and unoccupied buildings against light source aging effects. The single beam dual wavelength sensor technology provides the highest level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions.
To place an order or learn more, please visit http://www.dwyer-inst.com/Product/AirQuality/CarbonDioxideTransmitters
Series PMI Particulate Matter Transmitter
The Series PMI Particulate Matter Transmitter is designed to measure indoor air quality by detecting particulate matter in an office environment or HVAC duct. Using laser scattering technology, the Series PMI can measure particles as small as 0.3 µm, making it an essential component of any indoor air quality monitoring system. The optional relay combined with the settable alarm and control parameters allow the Series PMI to be a stand-alone controller.
To learn more or order, please visit https://www.dwyer-inst.com/Product/AirQuality/IndoorAirQualityTransmitter/SeriesPMI
Series RSMC StabiliSENSE™ Critical Room Status Monitor
The Series RSMC StabiliSENSE™ Critical Room Status Monitor is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. It can be configured to monitor positive or negative pressure in clean rooms, hospital isolation rooms, school nurses offices, laboratories, and vivariums. The RSMC is a complete system with a touchscreen graphical user interface which enables access to pressure, humidity, temperature, air change, security, door status, calibration, and alarm setup. The graphical display color changes allow a clear determination of when the parameters are operating within the acceptable range (green), caution range (yellow), or have gone outside the acceptable operating range (red). The RSMC StabiliSENSE™ critical room status monitor comes standard with BACnet MS/TP and Modbus® RTU communications.
To learn more or order, please visit https://www.dwyer-inst.com/Product/SeriesRSMC#literature
Series RSME Room Status Monitor
The Series RSME Room Status Monitor is designed for low differential pressure applications that require stringent pressure monitoring and alarming. It can be configured to monitor positive or negative pressure in clean rooms, hospital isolation rooms, laboratories, and vivariums. The RSME is a complete system with a touchscreen graphical user interface which enables access to pressure, humidity, temperature, air change, security, door status, calibration, and alarm setup. The graphical display color changes allow a clear determination of when the parameters are operating within the acceptable range (green), caution range (yellow), or have gone outside the acceptable operating range (red). The RSME room status monitor comes standard with BACnet MS/TP and Modbus® RTU communications.
To learn more or order, please visit https://www.dwyer-inst.com/Product/Pressure/RoomStatusMonitors/SeriesRSME
Series MSX and MSX Pro Magnesense® Differential Pressure Transmitters
The Series MSX and MSX Pro Magnesense® differential pressure transmitters are ideal for monitoring building control applications. With enhanced accuracy and stability, the MSX Pro is also suitable for high performance, critical environments.
To learn more or order, please visit https://info.dwyer-inst.com/msx-msxpro
Model CMS300 Carbon Monoxide Transmitter and Switch
The Carbon Monoxide Transmitter and Switch, Model CMS300, provides a field selectable current or voltage output that is proportional to the carbon monoxide concentration in underground parking garages, vehicle maintenance facilities, or mechanical rooms. An integral relay can be used for alarm conditions and is configured with preset jumper selectable ranges of 25, 60, or 150 PPM. Field calibration can be done by using calibration gas, a calibration adapter, and the on board zero and span potentiometers.
Learn more or order at http://www.dwyer-inst.com/Product/AirQuality/CarbonMonoxideTransmitters/ModelCMS300
Series RHPLC Wall Mount Humidity/Temperature Transmitter
The Series RHPLC Wall Mount Humidity/Temperature Transmitter is a compact economical sensor for the building automation market space. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. Each unit utilizes a capacitive polymer sensing element to deliver a proportional analog output. A combination humidity and temperature model can be configured with current, voltage, RTD, or thermistor output. A wide selection of passive RTD or thermistor temperature sensors are available in this series.
Learn more or order at www.dwyer-inst.com/Product/AirQuality/Humidity-TemperatureTransmitters/SeriesRHPLC
Dwyer Instruments, Inc. Corporate Overview
Dwyer is a global leader in designing and manufacturing innovative controls, sensors, and instrumentation solutions for the HVAC and process automation industries. They have over 650 technical patents, a 99.5% on-time delivery rate, and have won numerous awards for their innovative products. Dwyer offers solutions for applications such as building automation, HVAC systems, powder and bulk handling, water and wastewater treatment, and valve automation.
2017 Dwyer Instruments Pressure Instrumentation Quick Selection Guide
This document provides a selection guide for various pressure gauges, switches, transmitters, and transducers. It lists product series, measurement ranges, accuracy, materials, temperature and pressure limits, outputs, connections, and other specifications to help compare similar products for different applications. The guide contains information on over 20 product series to assist in choosing the best option.
Compact Differential Pressure Transmitters: Series 668B/D
The 668B/D is a compact differential pressure transmitter that measures extremely low pressure ranges down to 0.1" w.c. It features current or voltage outputs, front or bottom pressure connections, and protection from overpressure and incorrect wiring. It is designed for HVAC applications such as measuring pressure differences in clean rooms, duct static pressure, and monitoring variable air volume systems and air filters.
Non-Dispersive Infrared, NDIR, CO2 Sensors
O documento descreve sensores de CO2 que usam tecnologia NDIR (infravermelho não dispersivo). Os sensores NDIR medem o CO2 com alta precisão usando espectroscopia infravermelha, onde diferentes moléculas absorvem comprimentos de onda específicos. Os sensores Dwyer usam uma fonte de luz infravermelha, câmara de amostra, filtro e detector para medir a absorção de CO2 e calcular sua concentração.
Submersible Level Transmitters
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc.
©Copyright 2015 Dwyer Instruments, Inc.
RTD Temperature Sensors
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc.
©Copyright 2015 Dwyer Instruments, Inc.
Infrared Thermometers
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc.
©Copyright 2015 Dwyer Instruments, Inc.
Thermo-Anemometers
O documento descreve termos-anemômetros, que são instrumentos que medem velocidade do ar usando sensores térmicos ou de fio quente. Eles incluem modelos fixos para monitoramento contínuo e portáteis para teste, e medem velocidade do ar baseados no efeito de resfriamento dos sensores quando expostos ao fluxo de ar. Termos-anemômetros oferecem boa detecção de baixas velocidades e resposta rápida.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
More Related Content
More from Dwyer Instruments
Model DAFA Air Flow Indicator and Alarm
The Model DAFA Air Flow Indicator and Alarm alerts users of low or no air flow conditions in pipes utilizing a thin, field trimmable vane to sense the air flow rate. An 85 dB audible buzzer alternates with a bright red LED to alert users when the air flow rate drops, indicating low or no flow in the pipe. The DAFA is battery powered to provide versatility for where it can be installed, and offers a yellow LED to indicate a low battery. This device is ideal for monitoring radon mitigation systems by detecting a loss of air flow in the pipe and providing a signal to homeowners if the fan has stopped operating.
To place an order or learn more, please visit the Dwyer website at https://dwyer-inst.com/modeldafa.html
Series PMT2 Particulate Transmitter
The Series PMT2 is a transmitting device that senses the current generated by particles as they pass by the sensing probe. The current level is correlated to the amount of particles in the air stream, and thus the PMT2 output (4-20mA loop signal) can provide a representation of the particulate in the duct.
Learn more or order at https://dwyer-inst.com/series-pmt2-particulate-transmitter.html
Series WE08 2-Piece NPT Brass Ball Valve
The Series WE08 incorporates a full port 2-piece brass ball valve for great flow rates with minimal pressure drop. The valve features a blowout proof stem for added safety, reinforced PTFE seats and seals for longer life, and a brass ball for better performance. Actuators are direct mounted creating a compact assembly for tight spaces. The Series WE08 can be configured with either an electric or pneumatic actuator. Electric actuators are available in weatherproof or explosion-proof, a variety of supply voltages, and two-position or modulating control. Two-position actuators use the supply voltage to drive the valve open or closed, while the modulating actuator accepts a 4 to 20 mA input for valve positioning. Actuators feature thermal overload protection and permanently lubricated gear train.
The pneumatic double acting actuator uses an air supply to drive the valve open and closed. The actuator has two supply ports, with one driving the valve open and the other driving the valve closed. Spring return pneumatic actuators use the air supply to open the valve and internally loaded springs return the valve to the closed position. Also, between the air supply ports for opening and closing the valve, actuators are constructed of anodized and epoxy coated aluminum for years of corrosion free service.
To place an order or learn more, please visit the Dwyer website at https://dwyer-inst.com/serieswe08.html
Series DP3 Wireless Differential Pressure Manometer
The Series DP3 Wireless Differential Pressure Manometer is a compact, highly accurate, auto-ranging differential pressure manometer ideal for low flow applications. The Series DP3 is used in conjunction with the Dwyer Mobile Meter® application software to view pressure drop across filters, static pressure in ducts, and velocity pressures from pitot tubes or air flow stations.
Learn more or order at https://dwyer-inst.com/series-dp3.html
Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter
The Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter is available in a variety of materials including PVC, Aluminum, Brass, or 316 stainless steel. The variety of optional materials allows the flowmeters to be used in many different applications. The Series INSITE Flowmeters are also available with an optional field adjustable reed switch for high and low alarms.
To learn more about the Series IS/TX/PX INSITE™ Flowmeter, please visit the Dwyer website at: https://www.dwyer-inst.com/Product/SeriesIS-PX-TX
Series CDT / CDTR / CDTV / CDTA Carbon Dioxide/Temperature Transmitters
Dwyer Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. For increased sensor accuracy, a single beam dual wavelength nondispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied and unoccupied buildings against light source aging effects. The single beam dual wavelength sensor technology provides the highest level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions.
To place an order or learn more, please visit http://www.dwyer-inst.com/Product/AirQuality/CarbonDioxideTransmitters
Series PMI Particulate Matter Transmitter
The Series PMI Particulate Matter Transmitter is designed to measure indoor air quality by detecting particulate matter in an office environment or HVAC duct. Using laser scattering technology, the Series PMI can measure particles as small as 0.3 µm, making it an essential component of any indoor air quality monitoring system. The optional relay combined with the settable alarm and control parameters allow the Series PMI to be a stand-alone controller.
To learn more or order, please visit https://www.dwyer-inst.com/Product/AirQuality/IndoorAirQualityTransmitter/SeriesPMI
Series RSMC StabiliSENSE™ Critical Room Status Monitor
The Series RSMC StabiliSENSE™ Critical Room Status Monitor is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. It can be configured to monitor positive or negative pressure in clean rooms, hospital isolation rooms, school nurses offices, laboratories, and vivariums. The RSMC is a complete system with a touchscreen graphical user interface which enables access to pressure, humidity, temperature, air change, security, door status, calibration, and alarm setup. The graphical display color changes allow a clear determination of when the parameters are operating within the acceptable range (green), caution range (yellow), or have gone outside the acceptable operating range (red). The RSMC StabiliSENSE™ critical room status monitor comes standard with BACnet MS/TP and Modbus® RTU communications.
To learn more or order, please visit https://www.dwyer-inst.com/Product/SeriesRSMC#literature
Series RSME Room Status Monitor
The Series RSME Room Status Monitor is designed for low differential pressure applications that require stringent pressure monitoring and alarming. It can be configured to monitor positive or negative pressure in clean rooms, hospital isolation rooms, laboratories, and vivariums. The RSME is a complete system with a touchscreen graphical user interface which enables access to pressure, humidity, temperature, air change, security, door status, calibration, and alarm setup. The graphical display color changes allow a clear determination of when the parameters are operating within the acceptable range (green), caution range (yellow), or have gone outside the acceptable operating range (red). The RSME room status monitor comes standard with BACnet MS/TP and Modbus® RTU communications.
To learn more or order, please visit https://www.dwyer-inst.com/Product/Pressure/RoomStatusMonitors/SeriesRSME
Series MSX and MSX Pro Magnesense® Differential Pressure Transmitters
The Series MSX and MSX Pro Magnesense® differential pressure transmitters are ideal for monitoring building control applications. With enhanced accuracy and stability, the MSX Pro is also suitable for high performance, critical environments.
To learn more or order, please visit https://info.dwyer-inst.com/msx-msxpro
Model CMS300 Carbon Monoxide Transmitter and Switch
The Carbon Monoxide Transmitter and Switch, Model CMS300, provides a field selectable current or voltage output that is proportional to the carbon monoxide concentration in underground parking garages, vehicle maintenance facilities, or mechanical rooms. An integral relay can be used for alarm conditions and is configured with preset jumper selectable ranges of 25, 60, or 150 PPM. Field calibration can be done by using calibration gas, a calibration adapter, and the on board zero and span potentiometers.
Learn more or order at http://www.dwyer-inst.com/Product/AirQuality/CarbonMonoxideTransmitters/ModelCMS300
Series RHPLC Wall Mount Humidity/Temperature Transmitter
The Series RHPLC Wall Mount Humidity/Temperature Transmitter is a compact economical sensor for the building automation market space. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. Each unit utilizes a capacitive polymer sensing element to deliver a proportional analog output. A combination humidity and temperature model can be configured with current, voltage, RTD, or thermistor output. A wide selection of passive RTD or thermistor temperature sensors are available in this series.
Learn more or order at www.dwyer-inst.com/Product/AirQuality/Humidity-TemperatureTransmitters/SeriesRHPLC
Dwyer Instruments, Inc. Corporate Overview
Dwyer is a global leader in designing and manufacturing innovative controls, sensors, and instrumentation solutions for the HVAC and process automation industries. They have over 650 technical patents, a 99.5% on-time delivery rate, and have won numerous awards for their innovative products. Dwyer offers solutions for applications such as building automation, HVAC systems, powder and bulk handling, water and wastewater treatment, and valve automation.
2017 Dwyer Instruments Pressure Instrumentation Quick Selection Guide
This document provides a selection guide for various pressure gauges, switches, transmitters, and transducers. It lists product series, measurement ranges, accuracy, materials, temperature and pressure limits, outputs, connections, and other specifications to help compare similar products for different applications. The guide contains information on over 20 product series to assist in choosing the best option.
Compact Differential Pressure Transmitters: Series 668B/D
The 668B/D is a compact differential pressure transmitter that measures extremely low pressure ranges down to 0.1" w.c. It features current or voltage outputs, front or bottom pressure connections, and protection from overpressure and incorrect wiring. It is designed for HVAC applications such as measuring pressure differences in clean rooms, duct static pressure, and monitoring variable air volume systems and air filters.
Non-Dispersive Infrared, NDIR, CO2 Sensors
O documento descreve sensores de CO2 que usam tecnologia NDIR (infravermelho não dispersivo). Os sensores NDIR medem o CO2 com alta precisão usando espectroscopia infravermelha, onde diferentes moléculas absorvem comprimentos de onda específicos. Os sensores Dwyer usam uma fonte de luz infravermelha, câmara de amostra, filtro e detector para medir a absorção de CO2 e calcular sua concentração.
Submersible Level Transmitters
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc.
©Copyright 2015 Dwyer Instruments, Inc.
RTD Temperature Sensors
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc.
©Copyright 2015 Dwyer Instruments, Inc.
Infrared Thermometers
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc.
©Copyright 2015 Dwyer Instruments, Inc.
Thermo-Anemometers
O documento descreve termos-anemômetros, que são instrumentos que medem velocidade do ar usando sensores térmicos ou de fio quente. Eles incluem modelos fixos para monitoramento contínuo e portáteis para teste, e medem velocidade do ar baseados no efeito de resfriamento dos sensores quando expostos ao fluxo de ar. Termos-anemômetros oferecem boa detecção de baixas velocidades e resposta rápida.
More from Dwyer Instruments (20)
Series DP3 Wireless Differential Pressure Manometer
Series DP3 Wireless Differential Pressure Manometer
Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter
Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter
Series CDT / CDTR / CDTV / CDTA Carbon Dioxide/Temperature Transmitters
Series CDT / CDTR / CDTV / CDTA Carbon Dioxide/Temperature Transmitters
Series RSMC StabiliSENSE™ Critical Room Status Monitor
Series RSMC StabiliSENSE™ Critical Room Status Monitor
Series MSX and MSX Pro Magnesense® Differential Pressure Transmitters
Series MSX and MSX Pro Magnesense® Differential Pressure Transmitters
Model CMS300 Carbon Monoxide Transmitter and Switch
Model CMS300 Carbon Monoxide Transmitter and Switch
Series RHPLC Wall Mount Humidity/Temperature Transmitter
Series RHPLC Wall Mount Humidity/Temperature Transmitter
2017 Dwyer Instruments Pressure Instrumentation Quick Selection Guide
2017 Dwyer Instruments Pressure Instrumentation Quick Selection Guide
Compact Differential Pressure Transmitters: Series 668B/D
Compact Differential Pressure Transmitters: Series 668B/D
Recently uploaded
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Mechatronics material . Mechanical engineering
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Pressure Relief valve used in flow line to release the over pressure at our d...
Pressure Relief valve used in flow line to release the over pressure at our desired pressure
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Recently uploaded (20)
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Pressure Relief valve used in flow line to release the over pressure at our d...
Pressure Relief valve used in flow line to release the over pressure at our d...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
EnOcean
- 1. EnOcean Wireless Products Demonstration The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
- 2. Introduction Wireless, energy harvesting technology Ultra low power consumption Dwyer is member of EnOcean Alliance Communicates on 868 and 902 MHz bands Includes sensors, switches, controllers, and more Integrates well with BAS
- 3. Product Demonstration Example ideas: EWTE / EWRH – wireless temp transmitter & wireless temp and RH transmitter. USB-300 – wireless USB receiver. Cost Detail EWTE = $125.00 USD EWRH = $175.00 USD