Gas Leakage Detection Based on IOT
Cloud Technologies providing Complete Solution for all
Academic Projects Final Year/Semester Student Projects
For More Details,
Contact:
Mobile:- +91 8121953811,
whatsapp:- +91 8522991105,
Email ID: cloudtechnologiesprojects@gmail.com
The main purpose of the project is to detect the location of fault in underground cable lines from the base station in kilometers using a Renesas micro-controller. This project uses the standard concept of Ohms law i.e., when a low DC voltage is applied at the feeder end through a series resistor to the Cable lines, then current would vary depending upon the location of fault in the short circuited cable. Both the methods use voltage convertor, microcontroller and potentiometer to find the fault location under unsymmetrical faults.
In the urban areas, the electrical cables run in undergrounds instead of overhead lines. Whenever the fault occurs in underground cable it is difficult to detect the exact location of the fault for process of repairing that particular cable and long outage of power supply can cause the power distributors and retailers heavy loss of revenue and discomfort of the customers. Therefore, a quick detection and rectification of the faults is a major drawback for other power distributors and retailers. The proposed system finds the exact location of the fault using GSM Module and IOT
This system uses a Renesas micro-controller and a rectified power supply. Here the current sensing circuits made with combination of resistors are interfaced to Renesas controller with help of the ADC device for providing digital data to the microcontroller representing the cable length in KM’s. The fault creation is made by the set of switches. The relays are controlled by the relay driver IC which is used for switching the power sequentially to all the lines. A 16x2 LCD display connected to the microcontroller to display the information.
In case of short circuit (Line to Ground), the voltage across series resistors changes accordingly, which is then fed to an ADC to develop precise digital data to a programmed Renesas board that further displays fault location in kilometers.
The project future can be implemented by using capacitor in an ac circuit to measure the impedance which can even locate the open circuited cable.
A smart meter is an electronic device
that records information such as
consumption of electric energy, voltage
levels, current, and power factor. Smart
meters communicate the information to
the consumer for greater clarity of
consumption behavior, and electricity
suppliers for system monitoring and
customer billing.
Arduino based intelligent greenhouse ProjectAmit Saini
Final Year Project : - Arduino based ‘Intelligent Green House'
A complete greenhouse monitoring and controlling system ,that is automated, updating each and every detail on internet that can be accessed from anywhere. For sensors, it uses a light sensor, temperature sensor, moisture sensor, humidity sensor and all the updates will be available on internet through Ethernet shield through which the user can take care of the garden even when not at home.
Electronics Projects List for Engineering StudentsElectronics Hub
We found that many electronics engineering students are searching for various projects on electronics to learn and do those projects in final year and to complete their B.Tech successfully. So, ElectronicsHub.Org provides top list of electronics projects ideas in this presentation especially for those engineering students convenience. These are mainly useful for ECE, EEE and EIE students. This presentation includes 100 best projects ideas which are all having high demand and are used for real life purpose also. You may also get more number of projects ideas by visiting the page http://www.electronicshub.org/electronics-projects-ideas/
These projects on electronics are collected from various resources and are proposed by many professionals.
Gas Leakage Detection Based on IOT
Cloud Technologies providing Complete Solution for all
Academic Projects Final Year/Semester Student Projects
For More Details,
Contact:
Mobile:- +91 8121953811,
whatsapp:- +91 8522991105,
Email ID: cloudtechnologiesprojects@gmail.com
The main purpose of the project is to detect the location of fault in underground cable lines from the base station in kilometers using a Renesas micro-controller. This project uses the standard concept of Ohms law i.e., when a low DC voltage is applied at the feeder end through a series resistor to the Cable lines, then current would vary depending upon the location of fault in the short circuited cable. Both the methods use voltage convertor, microcontroller and potentiometer to find the fault location under unsymmetrical faults.
In the urban areas, the electrical cables run in undergrounds instead of overhead lines. Whenever the fault occurs in underground cable it is difficult to detect the exact location of the fault for process of repairing that particular cable and long outage of power supply can cause the power distributors and retailers heavy loss of revenue and discomfort of the customers. Therefore, a quick detection and rectification of the faults is a major drawback for other power distributors and retailers. The proposed system finds the exact location of the fault using GSM Module and IOT
This system uses a Renesas micro-controller and a rectified power supply. Here the current sensing circuits made with combination of resistors are interfaced to Renesas controller with help of the ADC device for providing digital data to the microcontroller representing the cable length in KM’s. The fault creation is made by the set of switches. The relays are controlled by the relay driver IC which is used for switching the power sequentially to all the lines. A 16x2 LCD display connected to the microcontroller to display the information.
In case of short circuit (Line to Ground), the voltage across series resistors changes accordingly, which is then fed to an ADC to develop precise digital data to a programmed Renesas board that further displays fault location in kilometers.
The project future can be implemented by using capacitor in an ac circuit to measure the impedance which can even locate the open circuited cable.
A smart meter is an electronic device
that records information such as
consumption of electric energy, voltage
levels, current, and power factor. Smart
meters communicate the information to
the consumer for greater clarity of
consumption behavior, and electricity
suppliers for system monitoring and
customer billing.
Arduino based intelligent greenhouse ProjectAmit Saini
Final Year Project : - Arduino based ‘Intelligent Green House'
A complete greenhouse monitoring and controlling system ,that is automated, updating each and every detail on internet that can be accessed from anywhere. For sensors, it uses a light sensor, temperature sensor, moisture sensor, humidity sensor and all the updates will be available on internet through Ethernet shield through which the user can take care of the garden even when not at home.
Electronics Projects List for Engineering StudentsElectronics Hub
We found that many electronics engineering students are searching for various projects on electronics to learn and do those projects in final year and to complete their B.Tech successfully. So, ElectronicsHub.Org provides top list of electronics projects ideas in this presentation especially for those engineering students convenience. These are mainly useful for ECE, EEE and EIE students. This presentation includes 100 best projects ideas which are all having high demand and are used for real life purpose also. You may also get more number of projects ideas by visiting the page http://www.electronicshub.org/electronics-projects-ideas/
These projects on electronics are collected from various resources and are proposed by many professionals.
Temperature based fan speed control & monitoring usingJagannath Dutta
Our object of making this project is for reducing the power consumption. And also to assist people who are disabled and are unable to control the speed of fan.
Micro controller based Traffic control systemRohit Kumar
This project deals with traffic system controlled by a microcontroller.
using IR controllers instead of using old timing circuits.
This system aims to provide much better and safer way of controlling Traffic signal system.
This system of controlling will help a lot in future.
I made this project soon after completing my trainee period. This project was aimed at reducing human effort and allowing ease of access to differently-abled people. Home automation using bluetooth is really cheap to build and easy install in your home.
Thank you very much for checking out my presentation.
If you are a student or a faculty of an engineering college and need to create a presentation, you can contact me. Check out my profile to know how.
This project describes about a device, which measures the power consumed by our household devices, using IoT technology.
complete presentation on Smart Irrigation system using thingspeak technology is mainly helpful for the farmer to monitor the crop fields. Thingspeak is a platform, we can login with our matlab credentials.this system highly used in Mushroom cultivation because Mushroom cultivation is complete done in a perticuler Room, so this system will monitor the room Humidity, temperature, light and AirQuality. the hole process is we can monitor from any where in the world with help of Thingspeak platform.
The aim of our project is to minimize this manual intervention by the farmer. Automated Irrigation system will serve the following purposes: 1) As there is no un-planned usage of water, a lot of water is saved from being wasted. 2) The irrigation is the only when there is not enough moisture in the soil and the sensors decides when should the pump be turned on/off, saves a lot time for the farmers. This also gives much needed rest to the farmers, as they don’t have to go and turn the pump on/off manually.
Smart street light system
1. SMART STREET LIGHT SYSTEM Design Report Kuriakose Mathew Libin Thomas Midhun Shaji
2. PROBLEM STATEMENT Automatic switching of street lights considering the intensity of sunlight, brightness control of lights on detecting movement and error reporting to electric sub sections.
3. PROJECT SCOPE/OBJECTIVE Smart street light system tries to find solution for the faster depletion of energy resources due to the inefficient usage and wastage of these resources. Increasing electricity bill is something that can be witnessed by these practices. This project help to decrease the wastage of electricity by controlling the working of street light system that attributes to a good amount of electricity bills in our nation This project does not include methods to incorporate usage of renewable resources like solar energy.
4. DESIGN AND IMPLEMENTATION CONSTRAINTS Constraints are mainly in the module that regulate the brightness of the light by considering the traffic on the street at a specific time. Infrared proximity sensors are costly and at the same time maximum distance to which the sensor can sense is limited to 1 metre, which may not be sufficient for a 45 metre road.
5. DEVELOPMENT METHOD This project include three modules, the sunlight sensing and control of onoff of the lights, the traffic sensing and brightness control, error reporting system. Microcontroller used is arduino uno r3 atmega 328p ,which has to be programmed for the three tasks. Inputs for the same come from the three sensors.output include instruction to onoff the control sytems.
6. SYSTEM OVERVIEW
7. SYSTEM FEATURES/USE CASES System for controlling onoff of lights Use Case Description Sunlight intensity less than 250 lux Sunlight intensity grater than 250 lux Flow of events If the intensity is less than 250 then switch on the lights Else switch off the light
8. Illuminance Example 120,000 lux Brightest sunlight 110,000 lux Bright sunlight 20,000 lux Shade illuminated by entire clear blue sky, midday 1,000 - 2,000 lux Typical overcast day, midday <200 lux Extreme of darkest storm clouds, midday 400 lux Sunrise or sunset on a clear day (ambient illumination). 40 lux Fully overcast, sunset/sunrise <1 lux Extreme of darkest storm clouds, sunset/rise
9. FOR COMPARISON, NIGHTTIME ILLUMINANCE LEVELS ARE: Illuminance Example <1 lux Moonlight[3] 0.25 lux Full Moon on a clear night[4][5] 0.01 lux Quarter Moon 0.002 lux Starlight clear moonless night sky including airglow[4] 0.0002 lux Starlight clear moonless night sky excluding airglow[4] 0.00014 lux Venus at brightest[4] 0.0001 lux Starlight overcast moonless night sky[4]
10. BRIGHTNESS CONTROL ON SENSING TRAFFIC Use Case Description Movement detected Flow of events If there is any movement detected by the infrared proximity sensor then increase the brightness by controlling voltage from 110v to 220v Continue this for next 5 minutes then resume the previous state
11. SYSTEM ARCHITECTURE
Engineering Electrical EEE list live projects Hyderabad 1000KV Technologies 9...1000kv technologies
Engineering electronics, embedded systems, 8051 projects, avr8, avr16, aurdunio, live electronics projects,list live projects Hyderabad 1000KV Technologies 9030844866 live projects, 1000KV Technologies, Hyderabad, engineering live projects, macadamia projects
Engineering Biomedical list live projects Hyderabad 1000KV Technologies 9030844866
B.Tech students Required ECE (Electronics and Communication Engineering) EEE (Electrical & Electronics Engineering) EIE (Electrical and Electronics Engineering) Mechatronics Mechanics Aerospace Bio Medical Diploma ME/M.Tech - Colleges Wireless Power Ozonics Research Projects Unique Ideas BE/B.Tech Colleges IT Live Projects ROBOTICS
Engineering Biomedical list live projects Hyderabad 1000KV Technologies 90308...1000kv technologies
Engineering Biomedical list live projects Hyderabad 1000KV Technologies 9030844866
live projects, 1000KV Technologies, Hyderabad, engineering live projects, macadamia projects,B.Tech students Required ECE (Electronics and Communication Engineering) EEE (Electrical & Electronics Engineering) EIE (Electrical and Electronics Engineering) Mechatronics Mechanics Aerospace Bio Medical Diploma ME/M.Tech - Colleges Wireless Power Ozonics Research Projects Unique Ideas BE/B.Tech Colleges IT Live Projects ROBOTICS
Temperature based fan speed control & monitoring usingJagannath Dutta
Our object of making this project is for reducing the power consumption. And also to assist people who are disabled and are unable to control the speed of fan.
Micro controller based Traffic control systemRohit Kumar
This project deals with traffic system controlled by a microcontroller.
using IR controllers instead of using old timing circuits.
This system aims to provide much better and safer way of controlling Traffic signal system.
This system of controlling will help a lot in future.
I made this project soon after completing my trainee period. This project was aimed at reducing human effort and allowing ease of access to differently-abled people. Home automation using bluetooth is really cheap to build and easy install in your home.
Thank you very much for checking out my presentation.
If you are a student or a faculty of an engineering college and need to create a presentation, you can contact me. Check out my profile to know how.
This project describes about a device, which measures the power consumed by our household devices, using IoT technology.
complete presentation on Smart Irrigation system using thingspeak technology is mainly helpful for the farmer to monitor the crop fields. Thingspeak is a platform, we can login with our matlab credentials.this system highly used in Mushroom cultivation because Mushroom cultivation is complete done in a perticuler Room, so this system will monitor the room Humidity, temperature, light and AirQuality. the hole process is we can monitor from any where in the world with help of Thingspeak platform.
The aim of our project is to minimize this manual intervention by the farmer. Automated Irrigation system will serve the following purposes: 1) As there is no un-planned usage of water, a lot of water is saved from being wasted. 2) The irrigation is the only when there is not enough moisture in the soil and the sensors decides when should the pump be turned on/off, saves a lot time for the farmers. This also gives much needed rest to the farmers, as they don’t have to go and turn the pump on/off manually.
Smart street light system
1. SMART STREET LIGHT SYSTEM Design Report Kuriakose Mathew Libin Thomas Midhun Shaji
2. PROBLEM STATEMENT Automatic switching of street lights considering the intensity of sunlight, brightness control of lights on detecting movement and error reporting to electric sub sections.
3. PROJECT SCOPE/OBJECTIVE Smart street light system tries to find solution for the faster depletion of energy resources due to the inefficient usage and wastage of these resources. Increasing electricity bill is something that can be witnessed by these practices. This project help to decrease the wastage of electricity by controlling the working of street light system that attributes to a good amount of electricity bills in our nation This project does not include methods to incorporate usage of renewable resources like solar energy.
4. DESIGN AND IMPLEMENTATION CONSTRAINTS Constraints are mainly in the module that regulate the brightness of the light by considering the traffic on the street at a specific time. Infrared proximity sensors are costly and at the same time maximum distance to which the sensor can sense is limited to 1 metre, which may not be sufficient for a 45 metre road.
5. DEVELOPMENT METHOD This project include three modules, the sunlight sensing and control of onoff of the lights, the traffic sensing and brightness control, error reporting system. Microcontroller used is arduino uno r3 atmega 328p ,which has to be programmed for the three tasks. Inputs for the same come from the three sensors.output include instruction to onoff the control sytems.
6. SYSTEM OVERVIEW
7. SYSTEM FEATURES/USE CASES System for controlling onoff of lights Use Case Description Sunlight intensity less than 250 lux Sunlight intensity grater than 250 lux Flow of events If the intensity is less than 250 then switch on the lights Else switch off the light
8. Illuminance Example 120,000 lux Brightest sunlight 110,000 lux Bright sunlight 20,000 lux Shade illuminated by entire clear blue sky, midday 1,000 - 2,000 lux Typical overcast day, midday <200 lux Extreme of darkest storm clouds, midday 400 lux Sunrise or sunset on a clear day (ambient illumination). 40 lux Fully overcast, sunset/sunrise <1 lux Extreme of darkest storm clouds, sunset/rise
9. FOR COMPARISON, NIGHTTIME ILLUMINANCE LEVELS ARE: Illuminance Example <1 lux Moonlight[3] 0.25 lux Full Moon on a clear night[4][5] 0.01 lux Quarter Moon 0.002 lux Starlight clear moonless night sky including airglow[4] 0.0002 lux Starlight clear moonless night sky excluding airglow[4] 0.00014 lux Venus at brightest[4] 0.0001 lux Starlight overcast moonless night sky[4]
10. BRIGHTNESS CONTROL ON SENSING TRAFFIC Use Case Description Movement detected Flow of events If there is any movement detected by the infrared proximity sensor then increase the brightness by controlling voltage from 110v to 220v Continue this for next 5 minutes then resume the previous state
11. SYSTEM ARCHITECTURE
Engineering Electrical EEE list live projects Hyderabad 1000KV Technologies 9...1000kv technologies
Engineering electronics, embedded systems, 8051 projects, avr8, avr16, aurdunio, live electronics projects,list live projects Hyderabad 1000KV Technologies 9030844866 live projects, 1000KV Technologies, Hyderabad, engineering live projects, macadamia projects
Engineering Biomedical list live projects Hyderabad 1000KV Technologies 9030844866
B.Tech students Required ECE (Electronics and Communication Engineering) EEE (Electrical & Electronics Engineering) EIE (Electrical and Electronics Engineering) Mechatronics Mechanics Aerospace Bio Medical Diploma ME/M.Tech - Colleges Wireless Power Ozonics Research Projects Unique Ideas BE/B.Tech Colleges IT Live Projects ROBOTICS
Engineering Biomedical list live projects Hyderabad 1000KV Technologies 90308...1000kv technologies
Engineering Biomedical list live projects Hyderabad 1000KV Technologies 9030844866
live projects, 1000KV Technologies, Hyderabad, engineering live projects, macadamia projects,B.Tech students Required ECE (Electronics and Communication Engineering) EEE (Electrical & Electronics Engineering) EIE (Electrical and Electronics Engineering) Mechatronics Mechanics Aerospace Bio Medical Diploma ME/M.Tech - Colleges Wireless Power Ozonics Research Projects Unique Ideas BE/B.Tech Colleges IT Live Projects ROBOTICS
Engineering Electronics, embedded systems list live projects Hyderabad 1000K...1000kv technologies
Engineering electronics, embedded systems, 8051 projects, avr8, avr16, aurdunio, live electronics projects,list live projects Hyderabad 1000KV Technologies 9030844866 live projects, 1000KV Technologies, Hyderabad, engineering live projects, macadamia projects
B.Tech students Required ECE (Electronics and Communication Engineering) EEE (Electrical & Electronics Engineering) EIE (Electrical and Electronics Engineering) Mechatronics Mechanics Aerospace Bio Medical Diploma ME/M.Tech - Colleges Wireless Power Ozonics Research Projects Unique Ideas BE/B.Tech Colleges IT Live Projects ROBOTICS
Latest ECE Projects Ideas In Various Electronics Technologieselprocus
These Latest ECE Projects Ideas In Various Electronics Technologies are helpful to Engineering Students.These projects ideas are suggested by our proffisionals.
https://www.elprocus.com
Visit our page to get more ideas on Latest ECE Projects Ideas In Various Electronics Technologies for Engineering Students.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Smart regulator for controlling fan speed through android mobileKhadarbaba Shaik
Now a day’s so many useful technologies are coming out to make our life style more comfort, luxurious and secure. Power is getting wasted with present regulators using for controlling fan speed as they are using resistive method and some regulators have come up with phase angle control method to save power, with these we can change fan speed up to 4 to 5 levels. but with advancement in technology now we can control the speed levels up to 10 and more also to give more comfort to different users.
In this project we will create an application to control the speed of the fan and to control some electrical appliances lights and water pump motors in home or office. Whenever we operate this application, it sends commands to our controlling system through blue tooth.
At controlling system side we have Bluetooth module, micro controller and load controlling circuits, zero cross detector circuit to help the speed controlling method. Whenever this blue tooth module receives command from android application then it transfers this command to micro controller. Micro controller will control the respective loads depends upon the command it received
Best Embedded Systems Projects Ideas In 2015elprocus
We provide you the Best Embedded Systems Projects Ideas In 2015. You can choose the best of your choice and interest from the list of topics we suggested. All new project ideas that are appearing focuses to improve the knowledge of Engineering students.
https://www.elprocus.com
Visit our page to get more ideas on Best Embedded Systems Projects Ideas In 2015 these ideas developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
3d printer electronics engineering live projects abstracts @1000KV Technologi...1000kv technologies
electronics engineering live projects abstracts
electronics projects, electronics projects for engineering final year students, electronics and communication engineering projects for final year students,100kv,1000kv,1000kv technologies,1000kv projects,technologies,live projects,Hyderabad live projects,live projects in, diploma low cost projects,1000kv projects, , academic projects,btech live projects,Hyderabad,1000kilovolts,1000kilovolts technologies ,btech main projects ,
Mini ee 1 breathe to lamp operating Electrical engineering Mini projects abst...1000kv technologies
100kv,1000kv,1000kv technologies,1000kv projects,technologies,live projects,Hyderabad live projects,live projects in, diploma low cost projects,1000kv projects, , academic projects,btech live projects,Hyderabad,1000kilovolts,1000kilovolts technologies ,btech main projects ,
pure mechanical projects,btech mechanical projects, ,engineering mechanical projects,mechanical kit projects diploma mechanical projects, live projects mechanical,new mechanical projects,
electronics projects, electronics projects for engineering final year students, electronics and communication engineering projects for final year students, Mini projects, electrical engineering mini projects abstracts
Industrial parameters monitoring system through smartphoneKhadarbaba Shaik
Now a day’s so many useful technologies are coming out to make our life style more comfort, luxurious and secure. Especially in mobile field so many application are being developed to give us more information and entertainment. This project is designed with combination of two latest and most demanding technologies that are Smart phone and Embedded Systems
In this project we will create an application to monitor the industry parameters like monitoring temperature, voltage and current from webpage. Whenever we open this application it gives the current status of industry. At industry side we have Ethernet module, micro controller, temperature sensor, voltage sensing circuit and current sensing circuit. This micro controller will keep updating these parameters data on webpage. We can check these value from anywhere on our Smart phones by opening this webpage from phone itself.
The Journal of MC Square Scientific Research is published by MC Square Publication on the monthly basis. It aims to publish original research papers devoted to wide areas in various disciplines of science and engineering and their applications in industry. This journal is basically devoted to interdisciplinary research in Science, Engineering and Technology, which can improve the technology being used in industry. The real-life problems involve multi-disciplinary knowledge, and thus strong inter-disciplinary approach is the need of the research.
Alcohol sensor with auto car ignition disables @1000KV Technologies 90308448771000kv technologies
electronics engineering live projects abstracts
electronics projects, electronics projects for engineering final year students, electronics and communication engineering projects for final year students,100kv,1000kv,1000kv technologies,1000kv projects,technologies,live projects,Hyderabad live projects,live projects in, diploma low cost projects,1000kv projects, , academic projects,btech live projects,Hyderabad,1000kilovolts,1000kilovolts technologies ,btech main projects ,
Similar to electronics engineering project topics for final year, iot projects (20)
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Home assignment II on Spectroscopy 2024 Answers.pdf
electronics engineering project topics for final year, iot projects
1. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
E.C.E/ Communication/ Projects
S. No Whatsapp <ECE> ,<email> to 9030844866 / 9030844877 for list &abstracts
KC01:
Futuristic design of breathe to voice conversion technology for dumb people.
About project: This system is converts analog breath inhaler exhale to emergency voice message with respect to micro
controlled programmed data. Microcontroller unit takes the input from breath pressure module to announce specific voice
message from voice IC which pre-recorded.
KC104:
PAPER CIRCUIT: loads activation using paper with circuit drawing on paper
About project: “100% working” you are the first person in the world who doing project with
paper wiring
draw circuit on paper write on any surface your regular roller ball pen will! paper circuits are a great way of
adding light to your drawings, origami, or papercraft creations. Instead of using wires to
Connect a battery to leds, paper circuits use conductive metal tape.
[ONLY IN 1000KV TECHNOLOGIES]
KC237
Study& Presentation of ALEXA ROBOT: IOT Smart Talking Human interaction
computer
“Topics covers: this robo talks with you like your friend ,you can talk, calculations, math, set alarm
by asking, any person, general knowledge, tasks, time, date, weather, IOT data, Google data…etc ”
KC127:
Automatic book position number detection in a rack. Even book changes position manually.
[FIRST POSSIBLE BOOK DETECTION CONCEPT IN THE WORLD]
2. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
About project: This paper describes a book placement and book searching method for performance enhancement of existing
Library systems. The book placement mechanism is used to ensure the placement of book inside the shelf according to
assigned code to facilitate manual searching. Every book contain each slot, if any one changes its previous also we can track
with no time.
NOTE: this project we are proving with three books.
KC28:
[Power up with Your Shoes] Charge your mobile phone by using Power generation from
walking shoe with voltage display.
About project: Themain idea of this project is “Generating power from foot/walk pressureenergy using Piezo electric effects
and charges mobile.
KC107:
Power generation from solar (sun) systemwithout Using solar panel for dc loads with
voltage display
About project: This project is proving the system to produce the power from sun rays without using solar panel; logic is new
discovered by 1000KV Technologies.
Still now whatever the system is present to generate power from sun is solar
panel. But this system NOT EVEN EXIST AT, project is also power generation from sun
but not from solar panel.
KC30:
Solar powered Medicine refrigeration with temperature display on LCD using
Microcontroller interface with Temperature sensor.
About project: Themain idea of this project is “refrigeration (Cooling) using Solar power based on Thermocouple effect
.temperaturedisplay on LCD using Microcontroller.
3. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
KC99:
3D-Printer: Design and manufacturing of 3D PRINTER with respect to Computer Aided
Manufacturing (C.A.M).
About project It all starts with making a virtual design of the object you want to create. This virtual design is for instance a
CAD (Computer Aided Design) file. This CAD file is created using a 3D modeling application.
3D printing, also known as additive manufacturing (AM), refers to processes used to synthesize a dimensional object in
which successive layers of material are formed under computer control to create an object. Objects can be of almost any shape
or geometry and are produced from digital model data 3D model or another electronic data source such as an Additive
Manufacturing File (AMF) file.
KC40:
(IEEE) Ultrasonic Spectacles and Waist-belt for Visually Impaired and Blind Person.
About project: This paper presents an electronic navigation system for visually impaired and blind people (subject). This
system understands obstacles around the subject up to 500 cm in front, left and right direction using a network of ultrasonic
sensors.
KC02:
Designing and implementation of quad copter
About project: A quad copter, also called a quad rotor helicopter or quad rotor, is a multi rotor helicopter that is lifted and
propelled by four rotors. Quad copters are classified as rotor craft, as opposed to fixed-wing aircraft, because their lift is
generated by a set of rotors(vertically oriented propellers).
KC11:
E-bike real time min 40km mileage 40km speed.
About project: Thepaper deals with a battery charger integrated into the traction hardware of an electric scooter, for
recharging the scooter batteries by means of a single-phase AC source. And Solar panels on the top chassis.
4. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
I.O.T /RASPBERRY PI
KC159: IOT Home Automation Using Raspberry Pi
KC160: IOT Liquid Level Monitoring System
KC161: IOT Theft Detection Using Raspberry Pi
KC162: IOT BasedToll Booth Manager System
KC163: IOT Heart Attack Detection& Heart Rate Monitor
KC164: IOT Patient Health Monitoring Project
KC165: Energy MeterMonitoring Over IOT
KC166: IOT Air & Sound Pollution Monitoring System
KC167: IOT Garbage Monitoring System
KC168: IOT Weather Reporting System
KC169: IOT BasedIndustry Automation
KC170: IOT BasedOffice Automation
KC171: IOT BasedHome Automation
Wifi_01 IOT based advanced industrial automation
Wifi_02 IOT Intelligent robot controlled by wi-fi communication
Wifi_03 IOT devices based access control systemwithout built-in application
Wifi_04 IOT Accessible display design to control home area networks
BLUETOOTH & ANDROID
KC12: Bluetooth& android based wireless notice board
5. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
About project: We have been using notice boards to display messages in offices, schools hospitals etc from a long time.
So this project is a solution to this problem as it wireless technology Bluetooth which provides us the facility to change
Message on notice boards from distant mobile phonethat is operated on android OS.
KC13:
Bluetooth& android mobile control home loads activation like future technology.
About project: This project is a fine combination of Android mobile technology and embedded system. User can control Home
appliances using Android mobile. An application should be installed on Android mobile handset to control various home
Appliances. User can send commands using that application.
KC14:
Bluetooth& android mobile control home locking system
About project: Android mobile controlled door security locking system has its main application in security systems.
It can be used in house, shop, offices, industry. We have provided a Relay And a DC motor. User needs to operate Application
to open door
KC15:
Bluetooth& android mobile control robot
About project: This project is a Bluetooth controlled robot. For this the android mobile user has to install an application on
mobile. Then user needs to turn on the Bluetooth in the mobile. The wireless communication techniques used to control the
robot is Bluetooth technology.
KC16:
Bluetooth& android mobile control water motor ON and OFF system
About project: This project is a fine combination of Android mobile technology and embedded system. User can control
water motor using Android mobile. An application should be installed on Android mobile handset to control various
water motor appliances. User can send commands using that application.
KC22:
Mobile touch screen based home load (fan, or bulb) controlling system using Android application.
About project: This project is a fine combination of Android mobile technology and embedded system. User can control Home
appliances using Android mobile. An application should be installed on Android mobile handset to control various
home appliances. Topiccovers wireless communication, serial communication, embedded c programming
KC24: Android based Fire Fighting Robot with high pressure water sprinkler
6. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
KC121:
Segway controlling with android app
About project: The Segway PT is a two-wheeled, self-balancing, battery-powered electric vehicle invented by Dean Kamen. It
is produced by Segway Inc. of New Hampshire. And this project controlling with android app
A.I / APPLICATIONs/ SENSOR PROJECTS
KC25:
Braille keyboard voice computer for visually blind people.
About project: Design and implement of Braille language speaker for blind students by using microcontroller.
KC33:
sensitive Alcohol sensor with auto car ignition disables function to avoid drunk and drive
about project: The main purpose behind this project is “Drunk driving detection”. Now days, many accidents are happening
because of the alcohol consumption of the driver or the person who is driving the vehicle. Thus Drunk driving is a major reason
of accidents in almost all countries all over the world. Alcohol Detector in Car project is designed for the safety of the people
seating inside the car. This project should be fitted / installed inside the vehicle.
KC34:
Prototype Wheel Chair Control System using hand gesture moments with MEMs sensor
and microcontroller.(prototype)
About project: The aim of this research is to develop a wheelchair system which controls its movement by the mere bending of
a person’s fingers.
KC35: Hand moment control wheel chair for physically imbalanced patients.(Real time)
7. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
About project: This project introduces an automated systemis to be developed to control the motor rotation of wheelchair
based on head and hand movement of physically challenged person. In order to facilitate these peoplefor their independent
movement, an accelerometer device
KC36:
Rescue child saver pipe climbing robot controlling with motors.
About project: This project aim in designing a “robot to rescue of a child in a borehole” which is capable of moving inside the
pipeaccording to the user commands given from PC. Theproject also used for picking and placing of objects based on arm
design.
KC42:
(IEEE) sun tracking schemes for photovoltaic panels
About project: In general, the power developed in such applications depends fundamentally upon the amount of solar
energy captured by the collector, and thus the problem of developing tracking schemes capable of following the
trajectory of the sun throughout the course of the day on a year-round basis has received significant coverage in this
project. It was shown that the amount of solar energy captured by a tilted collector could be increased by more than 40% by
adjusting the tilt angle on a seasonal basis.
KC43:
Automated irrigation system
About project: a sensor calculates the sand wetness and a microcontroller covers this data ,with respect to pre coded
programming microcontroller activates the relay systemto start DC water motor then sand will wet. Automatically systemwill
turn off after sand get wet.
8. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
KC47:
RFID based automatic authentication tollgate lifting systems and data display system
About project: An intelligent automatic tollgate open systemusing RFID reader in highway roads For advance data login
Systemand data recording system, in general office /home purpose, peopledon’t need billing but only authentication.
KC48:
Automatic control of street light systemdepends on vehicle presence on live road.
About project: The main idea of this project is “Automatic control of street light system depends on vehicle presence for saving
energy.
KC49:
Designof Portable device for monitoring systemof Gas, smoke, temperature& magnitude
radiation in a coal mines. With normal status and critical status indicator.
About project: The project aims in designing a system which is capable of detecting gas, smoke and temperature and
magnitude radiation in coil mines alerts the status in abnormal conditions using buzzer and display onLCD through sensor.
GENERAL EMBEDDED PROJECTS
GE_01 Fluid level indicator with controlling and monitoring of weather in industries
GE_02
Temperature monitoring and conditional maintenance system for operation theateres for
surgeries
GE_03 Automatic college bell system
GE_04 Dc motor speed and direction controlling using pwm
GE_05 Ac motor speed control using triac
GE_06 Dc motor speed and direction control using ir remote
GE_07 Stepper motor speed and direction control using ir
GE_08 Speed control of single phase induction motor using ir
GE_09 Industrial electronic device control through ir remote
GE_10 Automatic railway gate control system using ir
GE_11 Ir remote based appliance control system
GE_12 Infrared remote receiver
GE_13 Visitor counter with metal detector enhoused entry,exit and present count
9. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
GE_14 Automatic room light controller with visitor counter using ir sensor
GE_15 Heat protection system with thermostat
GE_16 Automatic embedded green house automation system
GE_17 Embedded street light control system
GE_18 Configurable password based authentication/access access and security system
GE_19 Password based door locking
GE_20 Time based electrical appliances control in industries using rtc
GE_21 Microcontroller based digital clock with alarm
GE_22 Power saver system for advertisement hoardings using rtc
GE_23 Embedded energy saver system for home appliances
GE_24 Embedded prepaid energy meter
GE_25 Power management system for seminar halls/auditoriums
GE_26 Bank locker security system with password and intruder alarm
GE_27 Advanced embedded automatic car parking system
GE_28 Stop watch with lapse for athletics
GE_29 Automatic inter gate locking system for toll tax
GE_30 Anti-theft alarm system
GE_31 Intelligent object counting system
GE_32 Wireless based automation of shutter control system
GE_33 Dam gates control
GE_34 Automatic plant irrigation system
GE_35 Power saving system for shopping malls using 8051
GE_36 Electronic voting machine
GE_37 Driver less vehicle navigation system
GE_38 Over load indication for power plants
GE_39 Alcohol detector system for survelliance cops on highways
GE_40 Solar tracking system using ldr
GE_41 Traffic control system with timmer
GE_42 Multi channel fault announcement system usng temperature, smoke and ldr sensors
GE_43 Prepaid energy meter
GE_44 Pc based data logger system
GE_45 Automatic gas leakage alerting system
GE_46 Smoke sensing device
GE_47 Fire sensor based alarm system
GE_48 Electronic eye for sensing multi colors
GE_49 Multi color sensing and identification using electronic eye
GE_50 Different colored objects seggretation based on color sensor through adc
GE_51 Industrial security system (fire, smoke, ir)
10. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
Pc based projects
PC_01 Pc based hitech home implementation
PC_02 Real time college alarm using pc
PC_03 Pc based industrial parameters announcement system
PC_04 Pc based robot navigationsystem
PC_05 Pc based wireless robot control system
PC_06 Device control using pc wireless
PC_07 Pc based optimim power management system for hotels
PC_08 Street light management using pc
PC_09 Power cut scheduling using pc
PC_10 Employee log system using pc and rfid
PC_11 Easy message sending using pc
PC_12 Pc based stepper motor speed and direction control
Dtmf/ mobile based
DT_01 Ivrs system using dtmf
DT_02 Dtmf based device control
DT_03 Dtmf based home automation
DT_04 Dtmf based industrial parameter controlling system
DT_05 Dtmf based motor controlwithout mobile phone
DT_06 Dtmf based security locking system
DT_07 Robot control through mobile phone
Voice based projects
VB_01 Text to voice conversion on pc [with front end]
VB_02 Mobile based text to voice converssion [with front end]
VB_03 Industrial parameters monitoring through voice [with front end]
VB_04 Hi_tech safety implementation by voice commands [with front end]
VB_05 Power plant false alarm system through voice [with front end]
VB_06 Ivrs through pc [with front end]
VB_07 Automatic station indication system using apr9600
VB_08 Environmental parameters monitoring through voice [front end]
Rf based projects
11. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
RF_01 Rf based industrial automation system
RF_02 Safe switching of high voltage devices using rf remote system
RF_03 Wireless data encryption and decryption for security in army applications
RF_04 Wireless data logger using rf communication
RF_05 Wireless electronic notice board using rf
RF_06 Advanced embedded remote control robot navigation system using rf
RF_07 Automatic station indication system for railways using lcd/apr9600
RF_08 Wireless industrial security systems for factories
RF_09 Pc based railway gate control using r.f. Communication
RF_10 Wireless temperature monitoring system using r.f communication
RF_11 Rf based security system for banking applications.
RF_12 Rf based patient monitoring system
RF_13 Wireless fire alarm & monitor on lcd
RF_14 Wireless digital code lock with status display
RF_15 Speed control of single phase induction motor using rf
RF_16 Rf controled robot with navigation
RF_17 Home apparatus controled through rf
RF_18 Wireless intrusion detection, electronic security and control using central monitoring system
RF_19 Modern bus station using rf (voice announcement)
RF_20 Dc motor speed and direction control using rf
RF_21 Dc motor speed and direction control using rf with pc
RF_22 Ac motor speed and direction control using rf
RF_23 Ac motor speed and direction control using rf with pc
RF_24 Wireless stepper motor control using rf
RF_25 Wireless stepper motor control using rf with pc
X-bee based projects
XB_01 Wireless data transmission using x-bee/zig-bee
XB_02 Industrial parameters monitoring & controlling using x-bee/zig-bee
XB_03 Multiple devices controlling using x-bee/zig-bee
XB_04 Speed & direction controlling of stepper motor using x- bee/zig-bee
XB_05 Pc based power plant parameters monitoring & controlling using x-bee/zig-bee
XB_06 X-bee/zig-bee based pick & place robot
XB_07 X-bee/zig-bee based temperature monitoring robot
XB_08 Power plant parameters monitoring and controlling using x-bee/zig-bee
XB_09 Speed control of single phase induction motor using x - bee /zig-bee
12. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
XB_10 Data logger using x- bee/zig-bee
XB_11 X-bee/zig-bee based nodal (nodes) communication through web server
XB_12 Development of a smart power meter for ami based zigbee
XB_13 Remote-controllable and energy-saving room architecture based on zigbee
XB_14 Zigbee based wireless electronic notice board
XB_15 Wireless data encryption and decryption using zigbee
XB_16 Zigbee based real time fluid tank level monitor and control
XB_17 Patient health monitoring system using zigbee
XB_18 Zigbee based over load intimation in pc
XB_19 Green house monitoring and controling through zigbee communication
XB_20 Coalmine safety system with zigbee specification
Mems based projects
ME_01 Mems based driving simulation [with front end]
ME_02 Wheel chair direction control with gesture recognition (mems accelerometer)
ME_03 Automatic fall detection and activity monitoring for elderly people
ME_04 Wireless mouse with mems accelerometer [with front end]
ME_05 Head movement tracking system
ME_06 Accelerometer based hand gesture recognition system
ME_07 Mems based vehicle inclination monitor
ME_08 Mems based robo control [wireless/wired]
ME_09 Mems based home appliance control [wireless/wired]
Gsm based projects
GS_01 Home security using gsm
GS_02 Agriculture field motor control system using gsm
GS_03 Industrial electrical devices control system through gsm
GS_04 Fire detection and automatic alert system
GS_05 Weather monitoring system in remote places using gsm
GS_06 Gsm based dc motor speed and direction control
GS_07 Sms based electrical appliance control for home /office
GS_08 Embedded automatic robotic vehicle navigationsystem through sms
GS_09 E-challan billing system using gsm
GS_10 Substation monitoring and control system using gsm
GS_11 Water reservoir monitoring and pumping system using gsm.
GS_12 Industrial data logger using gsm
GS_13 Remote power line data monitoring system using gsm
GS_14 Speed control of thread roller’s ac motor in spinning mills using gsm modem
13. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
GS_15 Real-time industrial process controlling & monitoring using mobile
GS_16
Gsm based industrial parameter monitoring system using serial communication and analog to
digital converters.
GS_17 Industrial eight channel data logger using gsm modem
GS_18
Intelligent system for hazardous gas, human detection and temperature monitoring in coal
minesusing gsm
GS_19
An advanced embedded mobile web server for aged people monitoring and parameter back
reception using gsm technologies
GS_20 Gsm based exam results acquisition system from server database
GS_21 Railway accident idenfitication and alert system
GS_22 Temperature measurement over gsm mobile
GS_23 Password protected gsm based device control
GS_24 Remote monitoring of vehicular parameters through gsm module
GS_25 Easy sms system
GS_26 Sms poll counting system for tv shows
GS_27 Sms based electrical apparatus control in offices
GS_28 Schedule data capturing using gsm.
GS_29 Development of an embedded system for unmanned railway gate
GS_30 Automatic mobile alert system for lethal gas detection
GS_31 Engine monitoring through gsm modem
GS_32 Sms based banking security system
GS_33 Gsm based smart information system for lost atm cards
GS_34
Gsm based device monitoring and controlling system with electromagnetic relay to control
230 volts a.c., 20amp load
GS_35 Gsm based stepper motor control system
GS_36 Power grid control using gsm
GS_37 Gsm based door opening and closing system
GS_38 Sms based motor speed control
GS_39 Vehicle over speed indication to traffic control room through gsm
GS_40 Traffic jam updates at signals ( rf )
GS_41 Dam level warning using gsm sms
GS_42 Modern atomized theft proof museums
GS_43 Control of soil moisture irrigation system
GS_44 Easy sms system
GS_45 Development of a gsm based vehicle security system
GS_46 Development of a gsm based lcd display
GS_47 Gsm intergrated smart atm transaction system
GS_48 Sms based dc motor speedand direction control
GS_49 Sms based ac motor speedand control
14. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
GS_50 Gsm based fire alerting and controling system with thermostast
GS_51 A smart gsm based embedded solution for continuous remote monitoring of cardiac patients
GS_52 Gsm based vehicle fuel level monitoring through sms
GS_53 Automatic meter reading using gsm
Gps based projects
GP_01 Acquiring altitude, longitude and latitude position on x,y & z axis for a specimen in motion
GP_02 Pc interfacing using gps technology
GP_03 Automobile theft identification using gps
GP_04 Gps based station arrival announcement system for buses / trains
GP_05 Gps based high precision universal clock for atomic laboratories
Rfid based projects
RD_01 Rfid based attendance system. [with front end]
RD_02 Erfid based security authentication system
RD_03 Rfid based banking system.
RD_04 Library management system using rfid
RD_05 Bus location announcement system
RD_06 Rfid based parcel tracing system
RD_07 Rfid based ration card
RD_08 Rfid based highway toll collection
RD_09 Development of an embedded system using rfid based security system
RD_10 Rfid based prepaid energy meter
RD_11 Rfid based car parking system
RD_12 Autonomous navigation of rfid sensing robots
RD_13 Rfid based door locking system
RD_14 Rfid based atm system
RD_15 Rfid based national card/ passport system
RD_16 Rfid based n.g.o./student bus pass id system
RD_17 Rfid based security system for mining industries
RD_18 Examination room guide using rfid for the jumbling system based exams
RD_19 Ezee link card for public transport system [with front end]
Smart card based projects
SC_01 Authentication and access control system for device using smart card technology
SC_02 Smart card based attendance system
SC_03 Smart card based security access control system
15. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
SC_04 Unmanned petrol bunk system
SC_05 Smart card based electronic passport system
SC_06 Prepaid energy meter using smart card
SC_07 Vehicle parking system using smart card
SC_08 Automatic door opeing and closing using smart card
SC_09 Hospital management system using smart card
Bio metrics based projects
BM_01 Fingerprint based authentication system
BM_02 Fingerprint based bank locker system
BM_03 Fingerprint based attendance record system
BM_04 Fingerprint based lift operating system
BM_05 Fingerprint based electronic voting system
BM_06 Finger print based security system
BM_07 Finger print based vehicle security system
BM_08 Finger print recognized atm system
BM_09 Finger print based physical access control vehicle immobilizer
Combinations
CM_01 Gps based border alert system for fishermen with boat speedometer
CM_02 Automatic power meter reading system using gsm network
CM_03 Gsm and rfid based intelligent courier mailbox system with automatic delivery notification
CM_04 Gps and gsm based office cab monitoring, alerting and logging system
CM_05 Accident identification system using gsm and gps
CM_06 Gsm based school children security system based on rfid
CM_07 Security access control using gps and gsm
CM_08 Gsm and gps based live human detection with pir sensor
CM_09
Student college alert system to parents by their entry at the college premises by using rfid and
gsm sms technology
CM_10 Employee log system using pc and rfid
CM_11 Rfid based bus announcemtn system using apr9600
CM_12 Modern restaurants automization for wireless menu dish ordering using touch panel and zigbee
Bluetooth based projects
BT_01 Bluetooth robot with cmos image sensor (spy robot)
BT_02 Remote controlled home automation using bluetooth
BT_03 Bluetooth based industrial data acquisition system
BT_04 Industrial devices controlling system using bluetooth
16. Eureka Court Complex, IInd Floor, Opp: R.S.Brothers, Above KS Bakers,
Ameerpet, Hyd-73
Contact @ Kartheek.kandhi : 9030 844 866 / 9030 844
877
Touch screen based projects
TS_01 Touch based industril motors/ high voltage devices control
TS_02 Touch based home automation
TS_03 Robo control
TS_04 Realtime atm access