Electronic Market, Bar Coding, And Computer Aided Designs

Electronic Market, Bar Coding, And Computer Aided Designs
online market, bar coding, and computer aided designs, which are regarded as advancements. The major benefit of technology is its ability to cut down
production costs and improving quality, especially if there are sales before the production process itself. Samsung is proud of its inventive advance in
technology and improving it for manufacturing products that support design technology and features. It is globally recognized that Samsung is very
strong on technology. The driving force behind the company's vast ability and pride is its ingrained culture of innovativeness. Moreover, it has
pioneered major technological inventions that it employed in introducing new products in global trade. Mixing between experience and technology
knowledge... Show more content on Helpwriting.net ...
Competitive environment Samsung competition faces many brand competition from other firm in the market that produce products that are
differentiated from Samsung itself. This type of competition requires market forecasting, for example, Samsung has envisaged the possible room
for 3D TV market share increase. Samsung has analyzed its brand competitors such as LG and Sharp and applied necessary plans for pricing and
supplying strategies on the grounds of market envisages. Samsung's plan is to sell 86 million 3D TVs by 2016, That's reflecting that they will need
to acquire more of the television market share. The company has planned to release new 3D TVs, which are advance. Majority of the competitors
have preferred to a model similar to Samsung's, which is 3D TVs. The dissimilarities are visible in quality and price but the appearances are very close.
Sony, Japanese corporation is well recognized for its web advisements, integrating PDF documents to enhance consumer awareness. Sony Company is
popular for its Sony Bravia, which is a 3D TV and sells for 2999 dollars. Bravia has similar features as its competitors though it takes after the trends
of Samsung. The company is among the top five in the television marketing. Additionally, it invests in other areas of entertainment such as film
production, MP3 players and gaming consoles. Sony Company uses other organizations
... Get more on HelpWriting.net ...

Case Study On Redcollar C2m Men's Suits In China
Research on the Radical Innovation of C2M Business
Model–A Case Study on Redcollar MTM Men's Suits in China
Abstract
For as of late years, with the profound coordination of informatization and industrialization, conventional assembling commercial ventures in China
have been researching for the street of change and overhauling. A Chinese article ofclothing venture, named Redcollar Group of China, has effectively
changed and moved up to cutting edge industry with high esteem included from work concentrated industry. It is vital to investigate the reason,
technique and plan of action it has made in order to give some valuable exhortation to China's conventional makes. In this contextual analysis, aberrant
examination, field research, correlation exploration and clients' ... Show more content on Helpwriting.net ...
It is worth to think about. Redcollar was set up in 1995. It has more than 3000 representatives with an enlisted capital of US$16 million. It has been
recompensed China's Famous Brand, the Most Competitive Brand in China, and so on. It had been a helpful accomplice of China's panel in the 28th
Athens Olympic Games and a helpful accomplice of China's assignment in the Asian Games from 2005 to 2008. It is the dressing development that one
ought to interest quality, taste, identity in shading, size, style and coordinating with the goal that one's garments coordinate his own particular
character. As a pioneer of China's garments brands, Redcollar has set up a business system of growing top of the line men's customized
Made–to–Measure (MTM) suit following 2003. It took 10 years to acknowledge customized men's suit customization by method for huge creation for
which Redcollar had put US$41.27 million in its 3000 specialists' processing plant research center. "Making Customization No Longer Luxury" as its
main goal, class and quality as its standards (Yu, 2014), Redcollar has turned into the main processing plant on the planet in which all men's suits are
modified

Bmw Case Study Analysis
Executive Summary
BMW has embarked on a mission to cut its notoriously long product development time in half utilizing a newly developed system code named "Digital
Car". Senior management has decided to utilize the new process on the 7–series platform. In order to accomplish this goal, BMW is preparing to take
advantage of the latest computer technology in car development. At the forefront of the new plan is a debate over the use of computer–aided–styling
(CAS). We recommend that BMW implement the Computer Aided Styling system and processes into their production development program.
Key Areas of Concern
The main business problem that BMW is facing is reducing its long product development time. BMW's current design process began ... Show more
content on Helpwriting.net ...
BMW's strategy for value creation lies in its meticulous engineering, including design and styling. BMW designers pride themselves in delivering the
unique styling that BMW is known for. They strive for designs that generate emotions В– "Works of art". This is evident in the fact that many of the
designers came from art or industrial design schools. The current design process involves two full size clay models В– which are extremely costly and
time consuming. However, the use of clay models provides a visual representation of the final product that many felt irreplaceable. By being able to
physically see and touch a model of the final product the model can be handcrafted to make the slightest details apparent. Once the models are
complete they are captured digitally by a laser scanner and brought into a Computer Aided Design (CAD) System.
The current process is working well to deliver the unique styling and quality that defines BMW, however, it is very time consuming and a major
roadblock to reducing the product development time. Senior management utilized the functional managers from the five key process areas that
accounted for about 90% of the critical processes involved in product development. These managers identified three main changes to the current system
that needed to take place in order to meet the development time reduction goals: Increased parallelization of design tasks, elimination of some design
iterations, and quicker completion of the

The Impact Of Technology And Modern Architecture
Technology and Modern Architecture How has it changed the Architects' way of thinking? Ali Alzahrani Arizona State University Imagine that
everything in the life is operated by computers including people basics duties such as cooking, washing, working, or even thinking instead of the
person. It could be something magnificent for some people, but others would think that technology would worsen people's lives. Lawler (2005) writes
"Technology is a problem because we cannot do without it and our use of it clearly makes us both better and worse" (p.194). In other words, the
problem of technology is that it is essential in our lives, but it has negative and positive effects on us. A look around our everyday surroundings tells us
that technology is ubiquitous, and it almost exists in every aspect of people's lives and architecture is not an exemption from this. Architects cannot
move forward in their designs if they neglect the crucial need of technology nowadays. At the same time, this technology has affected architects work in
general. While some people allege that technology has not affected the architects' manner of thinking, others agree that it has negatively affected the
way that architects think. Also, it has changed the manner in which architects present and deal with their designs. Decreasing the creativity on starting
concepts and impacting the designers' imaginations are two ways in which designers

Automated Design And Modelling Of Knuckle Joint
AUTOMATED DESIGN AND MODELLING OF KNUCKLE JOINT ABSTRACT
This paper shows the methodology of developing an application for design process of machine element making a Knowledge Based Engineering
(KBE) in the visual basic interfacing with the solid works to automate the task of repetitive design process and design models, while reusing and
modifying the existing designs in a Computer Aided Design (CAD) environment. The presented work shows the procedure for developing KBE tools
for standard design process of machine element and mechanical /engineering parts and assemblies based on the empirical relations. With the proposed
methodology and the developed Graphic User Interface (GUI), it is possible to achieve direct interaction between ... Show more content on
Helpwriting.net ...
KBE is a system or process which collects and stores and organizes this knowledge and makes it available in the reusable form by providing
computational support to the design process.
The need of KBE arouse due to problems in current knowledge structure, which is disorganized. Existing databases, designs, thumb rules, etc. are
not maintained in order, which makes the reusability difficult. Current knowledge structure is not secure also, as the databases that are not prepared
centrally are susceptible to changes by other designers and loose reliability. Capturing knowledge is essential, but capturing the knowledge that is
not necessary would lead to confusion and decrease effective reusability. KBE systems solve all the problems which are indicated above. KBE
allows designers to devote more time and effort in creative and the innovative work and makes design process simpler. KBE system automatically
extracts the given necessary knowledge from every stage of design cycle, and makes this knowledge available for remaining design cycles. KBE
system allows capturing and organization of knowledge in an efficient manner. With the application of KBE, it is possible to analyze the possibility of
manufacturing any part, knowing whether design is optimal or there are other alternative solutions available based on the designer. The objective of the
present work is to develop methodology for automating

How Does Technology Affect The Sports World
Joshua M RichardsonNovlan
English II
January 5, 2016
Technology is something that is utilized as a part of regular life, with having being changed and enhanced so vastly as of late late, it has greatly affected
the sports world. The technological sports world is vigorously working on ways to enhance how competitors perform. Competitors safety at all times
has also been made possible through the advancement of certain sporting equipment, such as helmets and body protection which are used to anticipate
wounds. Athletic health can be maintained and observed, and injuries treated, through the creation of cutting edge medical advancements, for example,
heart monitors, pedometers and muscle to fat ratio screens. Through this, a more ... Show more content on Helpwriting.net ...
Computer aided design permits virtual plan and testing strategies to be connected to all parts of game and recreation hardware innovative work.
Computer aided design offers a proficient method for considering and evaluating new items and thoughts, and is essentially used to enhance wellbeing,
solace and adequacy of particular sports equipment. Computer aided design is likewise utilized consistently as a part of the avocation of physical raw
numbers, and for both aggressive and preparing circumstances. Different advancements, for example, gear can be utilized to assess human execution.
These incorporate sensors and PCs as a component of their utility and can be utilized by competitors as a feature of their preparation administration.
"Examples of 'smart' equipment technologies include devices used for exercise stress testing and cardiovascular assessment, human reaction time and
frequency of movement meters, and jump and run characteristics devices." More advanced innovations, for example, movement catch examination are
additionally used to break down athletic execution. This includes digitally recording the developments of competitors amid wearing exercises which
can then be utilized for individual execution assessment by the games individual, for upgraded onlooker excitement, and at times restorative

Dental Hygienist Experience Essay
It would be early on Saturday morning in which I roll out of bed to prepare for my internship at Dr. Henkel's place, Horsham Dental Elements. Dr.
Henkel acquired the dental center in 1990 after moving the suburbs in Horsham. Many patients would come to this dental clinic, sitting in the waiting
lounge as they wait for their name to be announced. Each patient would be directed to the assigned room from the dental specialist (Dr. Henkel
Interview).
During the procedures for dental hygiene the dental hygienist would often comment on the patient and their overall health of their teeth. "Gums look
much less swollen. I barely see any plaque?" Other times they remark, "Are you flossing more regularly?" Once the polishing and cleaning was
complete the dental hygienist would then mention "Wait here, he will be here in just a moment."
Who was coming? It was the inspector, Dr. Henkel. The man was as round as a globe. He would dress in his usual green collared shirt, as he waddled
down the hallway with his thudding gait. Immediately, once entering the room, he would greet his patients with his warm welcoming smile. In
addition, he would sit in his swivel chair, cover his mouth with his surgical mask and then put his dental glasses to carefully examine the x–ray screens.
In other words, he was now ready to get ... Show more content on Helpwriting.net ...
Henkel was influenced from extraordinary people in his opinion who have taught him the importance in pursuing excellence. A microbiology
professor from the Philippines who Dr. Henkel described very small in stature, for instance, she would give her entire lecture series over an entire
semester without ever looking at a note. Another role model was Dr. Benjamin Leone, a clinical instructor at the University of Detroit who was the
toughest instructor he had in dental school. Dr. Henkel described "Getting an 'A' from him was next to impossible. But he taught us more, made us do
our work to the highest standard, than most others" (Dr. Henkel

Careers of Design: Interior and Fashion Essay
Billions of working adults hold positions in order to maintain a source of income for themselves and their families. These adults can fit their jobs into
certain categories, such as medical, legal, or labor, and yet there are still many professions that fit into a different type of category: Fine Arts. Fine Arts
is an unique category in which two special occupations fall into: a fashion designer and an interior designer.
Fine Arts is a unique category that some adults' jobs fit into. Fine Arts employs a majority of people who are artistic and are creative. However, not all
the employed enjoy the Arts; some of the careers are simplistic and simply follow orders of a creative boss. These jobs do not simply create
accessories or vanities for ... Show more content on Helpwriting.net ...
Yet, these subdivisions can be divided further, into particular careers.
Within the category of Fine Arts, there are many subdivisions, and these subdivisions are divided into many careers. Included in the food
subcategory are many careers such as a gourmet chef or a caterer. Also in the photography division there are different types of photo/videographers,
like a news cameraman, or a magazine photographer. Another example of a division of a section is an interior designer, which is a partition of the
subcategory building. Following this trend of division is a fashion designer, which falls into the subcategory of fashion. Within the main category of
Fine Arts, there are many subdivisions and careers that fall within, and one particularly interesting career happens to be a fashion designer.
One principally creative profession in the Fine Arts category is a fashion designer. A fashion designer's job is to "conceptualize and create newclothing
and accessory designs" (Fashions, n.d.). However, a fashion designer's work is not simple, they must stay up–to–date with the latest trends, color
palettes, and design clothing the intended wearer would definitely want to purchase and wear. Fashion Designers must excel in a variety of skills in
order to be productive and competitive. Essential skills include sewing, tailoring, pattern making, fashion history, and knowledge

Week 3 Individual Essay
Week 3 Individual Assignment Shelley Ashburn ENG/135 April 2, 2013 Treva Hereford Week 3 Individual Assignment Chapter 4 1. We request
that you use the order form supplied in the back of our catalog. To help process your order please use the order form supplied in the back of our
catalog. 2. We insist that you always bring your credit card to the store. So that we can faster serve your needs, always bring your credit card to the
store. 6. To avoid the loss of your credit rating, please remit payment within 10 days. Paying your bill within 10 days will prevent a loss of your
credit rating. 7. We don't make refunds on returned merchandise that is soiled. For a refund, please make sure the merchandise is as it was when it...
Show more content on Helpwriting.net ...
Even large fashion houses have to match staff size to the normal increase and decrease in sales. 36. Being a jack–of–all trades, Dave worked well in
his new selling job. Being good at what he does, Dave worked well in his new selling job. 37. Moving Leslie into the accounting department, where
she was literally a fish out of water, was like putting a square peg into a round hole, if you get my drift. Moving Leslie into the accounting
department was a different experience for her. 41. Management _______________(inaugurated) the recycling policy six months ago. Management
started the recycling policy six months ago. 48. I have completed the form and returned it to my insurance company, as per your instructions. I have
completed the form and returned it to my insurance company, just as you said to. 53. The raw data are submitted to the data processing division by
the sales representative each Friday. The raw data will be submitted to the data processing division by the sales representative each Friday. 59. Facing
some of the toughest competitors in the world, Harley–Davidson had to make some changes. The company introduced new products. Harley's
management team set out to rebuild the company's production process. New products were coming to market and the company was turning a profit.
Harley's quality standards were not on par with those of its foreign competitors. Harley's costs were still among the highest in

Cad Research Paper
Drafting has changed over the years. Now advanced technologies have increased the efficiency of drafting. Computers and new resources have made
drafting easier, better, and less time–consuming. New techniques like rapid prototyping, B.I.M, sustainability, and L.E.E.D has changed the face of
drafting. Instead of a group of people sitting around a table and drawing out the drafts people can now work independently with a computer designed
for drafting. Green buildings and "green" technology has made living easier and better. Rapid prototyping is a group of techniques used to quickly
fabricate a scale model of a physical part or assembly using three dimensional computer aided design (CAD) data. Construction of the par or assembly
is usually done... Show more content on Helpwriting.net ...
To receive an L.E.E.D certification, building projects satisfy prerequisites and earn points to achieve different levels of certification. L.E.E.D was by
the U.S Green Building Council (USGBC). Since its inception in 1998, L.E.E.D has grown to encompass more than 14,000 projects in the U.S.
L.E.E.D was created because USGBC had a vision that buildings and communities will regenerate and sustain the health and vitality of all life within a
generation, USGBC's mission was to transform the way buildings and communities are designed, built, and operated, enabling an environmentally and
socially responsible, healthy, and prosperous environment that improves the quality of life. There are four certification levels for L.E.E.D construction–
certified, silver, gold, and platinum that correspond to the number of credits accrued in five green design categories: sustainable sites, water efficiency,
energy and atmosphere, materials and resources, and indoor environmentally quality. L.E.E.D is a reward system that comes with certification, such as
access to expert technical support; wide–ranging marketing benefits, the unbiased, transparent assurance that the project team cut no corners in the
marking or updating of a Class A green

The Glass Cage By Nicholas Carr
Essay #1: The Glass Cage We live in the age of constant technological innovation and endless information; in which we are so connected and dependent
on the technology we use that we sometimes don't even realize how much we're relying on it. In The Glass Cage by Nicholas Carr, Carr defines
automation as, "the use of computers and software to do things we used to do ourselves," and argues that there are daunting consequences to our
reliance on technology (Carr 1). In his book, Nicholas Carr sets up three arguments related to automation, tacit knowledge, and the idea of work. His
main arguments throughout the novel are that humans are overestimating the benefits of automation, losing tacit knowledge through our reliance on
technology, and... Show more content on Helpwriting.net ...
Again, he argues that instead of automation replacing the work we had before, technology is actually changing the way we work. This leads into
the final point Carr makes in chapter one that automation is changing society's perception of work and leisure. Many people would agree that work
is not pleasurable and humans like leisure. However, Carr argues that, "thanks to our bias for leisure over work, ease over effort, we overestimate
automation's benefits" (19). Not only does he argue at the end of the chapter that most people are searching for a blend of life and work, but also he
argues that people actually enjoy work over leisure because of the sense of accomplishment and productivity they feel afterwards. Carr argues that we
overestimate the benefits of technology, when it may not even be what we really want as human beings. Furthermore, the his skeptical beliefs
regarding automation, tacit knowledge, and work versus leisure are central to his argument throughout this entire book. Are humans facing the
degeneration effect due to our reliance on technology? Carr would argue in chapter four that yes, we are losing creativity and knowledge of work
because we are not actively using our memory and cognition. When humans typically learn a new skill, the generation effect

The Theory Of Computational Design Thinking
Jose Lopez
September 22, 2016
ARC 5205 Advanced Theory Professor Neil Leach
Computational Design Thinking
The dominance of computational programs in the architectural career has become dominant throughout the years. It could be said that it has taken over
the entire practice and that the human aspect had been taken out completely. In the book Computational Design Thinking, by Achim Menges and Sean
Ahlquist this is discussed. It is important to understand how certain things work in an environment in other to comprehend how a design computer
system actually works. In order to do so, a system generating a system, history and cybernetics, and how the machine and men interact needs to be
analyzed. In doing so, it is determined that one cannot exist without the other.
A system generating a systems dominates the idea of computational design. A system has to ideas explained in the book. The first idea is a system
as a whole. The system as a whole refers to a particular holistic view of a single thing. While a generating system does not refer to a single thing; but
a combination of things that include rules that are capable of generating many things. A system can only become a system if it has a holistic property.
Meaning that if the object could have different meaning depending the approach. For example a flower; when given as a gift it is just a flower. It is not
thought of as a system it is just an object to the receiver. If the same flower is looked about in a different way it

The Impact Of Using Computer Aided Architectural Design
3.0Research methodology
The aim to investigate the impact of using Computer Aided Architectural Design (CAAD) software on students' creativity, this section going to
presents the adopted research design, criteria of sampling, data collection methods, and the data analysis methods.
3.1Research design
Since the relationship of CAAD and creativity represents a complex as reviews in literature, a combination method between case study and qualitative
method approach is consider appropriate. A case study will be utilized to assess students' creativity within a design studio setting between students that
use conventional method and students that use CAAD software. Qualitative study will be employed to explore experience of architectural instructors
and students about the utilization of CAAD software.
3.2Sample selection criteria
This Research will be carrying out on the third year students at the department of architecture at university of Khartoum. Research involving sixty
students as research samples, thirty students are using CAAD software, while the other half of the students are perform the design process using
conventional method. The reason of selecting this sample is there is combinations of student from two methods that going to help to logically compare
the degree of creativity in both methods. Ten Instructors will selected to be interviewed as a sample from the department of architecture at university
of Khartoum, because they are fully involved in this issue and

Warren Truss Bridge Essay
I decided to make a warren truss bridge for this project (Wikipedia, 2015). This type of bridge uses equilateral triangles to help bare tension or
compression forces that the bridge may undergo (Mudaliar, 2015). I picked this design because it is a popular bridge design and it will have a smaller
mass then some other bridge designs. This design has the potential to be very efficient in the amount of weight it can hold because of it being lighter
than other designs. The one problem you have to solve is how to spread out the force being applied to the one location. This is because in a warren
truss bridge you want to try to spread out the forces across the entire bridge rather than a localized point to minimize the forces on each of the segments
(Boon, 2011). When the mass is in a localized point all of the forces are larger than they are when the mass is spread out equally (Cridlebaugh, 2008).
Using this information I designed the top of my bridge to try ... Show more content on Helpwriting.net ...
The first change was that the piece at the base of the bridge located on either side was moved from the inside to the outside on the bottom of the
bridge. I changed this because it was easier to glue the two sides of the bridge together if it was on the bottom. This change didn't drastically
change the bridge but it did make the bridge closer to the 2cm block it had to be under at the starting point. The second change that I added the
braces to the wood pieces that made up the triangles. This helped my bridge because it made it easier to keep the pieces of the bridges together. It
also made the construction process cleaner and easier so I would be able to execute the rest of the design with more success. The third and final
change I made to my design was that I removed the piece of wood that was connected to the top of the bridge and the braces. I made this change
because I thought that the help it would provide to the bridge would not be worth the added

The Impact Of Ict On The Automotive Design And The...
Introduction
This report will study the use of ICT (Information and Communication technology) in the Automotive Design and the manufacturing process
ICT has become a fundamental part of engineering careers, thanks to software's which help us to design, create, test, analyse, assembly and many other
things, making the mass production of cars easier, more precise and faster. The most used and popular software's in engineering areAutoCAD
(Automatic Computer aided design) for precise dimension in drawing, BIM (Building information modelling), CAM (Computer Aided Manufacturing),
and CNC (Computer Numerical Control)
This report will also analyse the types of mechanical machines used in the process of manufacturing of a car also known as co–operative or
Collaborative robots, which are machines that can work along with human. All of them, excluding one (Force regulated co–operative robot), must have
an additional security feature, and we will analyse the features of this robot in a deeper way
AutoCAD
AutoCAD is a designing software used widely in many branches of engineering such as mechanical, civil and aeronautical engineering. Developed by
AutoDesk, Inc.
AutoCAD mainly helps us to design cars [Fig.1], buildings, planes, and almost any other object you can think of. Since its release to the public in
1982 AutoCAD has become one of the most recognized and used designing software; Now days we can get AutoCAD monthly subscription for the
price of ВЈ222.00
In 2010

Statement Of Sop In Computer Science
Statement of Purpose
'Learning is like a ripple in the waters of an endless ocean'. This is one of my favourite percepts and for the past few decades, man has been
advancing into the unknown realms of technology and science. This advancement is to make life comfortable for humans at home and at work and I
would like to be an essential part of such enhancement. To accomplish this imposing task. I am aware that besides my strong dedication and hard work,
an eminent background in Computer Science is required. Therefore, I have decided to pursue masters in Computer Science, which will lead me to a
career of teaching and research.
I am very earnest towards assimilating knowledge to the greatest amplitude. Effective teaching and proper guidance throughout schooling helped me
to build a strong foundation. I was fascinated by the way things work, from dismantling and maintaining my own toys to modeling a dam as a part of
science exhibition; my curiosity was focused at unraveling the function of devices. I have decided way long back to be a Mechanical Engineer which
was a logical career choice. ... Show more content on Helpwriting.net ...
Undergraduate education at Mahatma Gandhi Institute of Technology, emphasized mainly on the exposure to fundamentals of various fields in the
branch. I work hard and sincerely to achieve good grades, which is very evident from my constant grades. At the same time I am not a student who
concentrates on studies alone. Apart from having academic proficiency, I have participated actively in many extra–curricular activities like cultural,
social service events and sports. I love sports, and I am a member of National level Hand Ball team in my school

The Pros and Cons of Technology Essay
The Pros and Cons of Technology
As far back as I can remember my family and I have taken advantage of technology. The types of technology have changed over the years, along with
our usage and dependence on it. Technology is a fundamental part of our lifestyle, including both work and play. What is interesting is that we also
have many friends who use very little technology in their day–to–day living. This drastic difference makes one wonder how necessary the technology
really is, and whether or not our dependence on it is healthy in the long run. It is really easy to just get caught up in using technology without thinking
about the pros and cons.
I was born in the 80's, so technology as, I know it, was beginning to take aim at the ... Show more content on Helpwriting.net ...
The games were focused on boys and were designed by men. The limited software made specifically for girls contained no problem–solving or strategy
except possible the choice of what to wear. My mother purposely made my sister use technology and computers to become interested in a field that
at the time was dominated by men. So, basically I had to learn computing on my own. Video games were a huge interest of mine and still are. I can
remember the day my best friend snuck over with the latest in animated violence, "Mortal Combat". Let me tell you, once my mother witnessed my
"virtual decapitation" of my friend in quite a gruesome manner, we weren't allowed to touch the television for a week.
I started middle school when we moved to Rochester Hill's from Ann Arbor. Our new blended family (my mother remarried) had several
computers and other new technological devices, as did most of the homes in the affluent community in which we lived. Home pc's became a useful
tool in middle school; I surfed the net, wrote papers, and researched articles over the Internet. My whole family became engulfed with the
technology wave. Our extended family and close friends eventually all came to a point where they used some sort of pc or computing device in their
everyday lives. Computers made it easy to communicate, and because our family and relatives lived a good distance apart we were able to effectively
chat and email our way out of "snail mail."
In high school my whole

Computer Skilled Design Case Study
For this paper i am going to look at and discuss CAD (Computer aided design) skill levels of students in time for FMP (Final Major Project). In terms
of up–skilling students, we are looking at guiding the student through the door of deeper knowledge into software use and the understanding of it. To
help this work we all need to be fully aware and in the know of what we are trying to achieve. In this instance we are looking at design specific
software and learning it in a more advanced manner. As aspiring Architects and product designers etc, one will need to haveknowledge of certain
methods, applications and technics. This is useful in manifesting design concepts and ideas. Particularly useful midway through the course as this is
the time ... Show more content on Helpwriting.net ...
In a flipped classroom students watch online lectures and discussion and then carry out group dialogue, or choose to carry out research at home and
engage in concepts discussion in the studio with guidance from the tutor(s)Therefore experiencing a flipped session in the class a while back it seemed
like a more fun way of experiencing learning. We connected our phones to our tutors instructional live session and we answered questions and gained
understanding straight away. Wouldn't we agree that its better to enjoy learning rather than resent it, a bit harsh but i pretty sure we've all been there.
Flipping the class and using technology in teaching is definitely not something to be ignored, I would say its an investment into ones career..
When i thought about it I realised we already practice this but just minus the Nearpod interface. We simply deliver the required knowledge in class via
demonstration and then students practice what is shown in the demo as we go along. Students basically learn far quicker because they are learning by
practicing more than seeking or reading how to.. Concequently If we were to give the students what we show in class as homework everybody would
have a completely different experience with the same software, not that they couldn't follow the instructions because that would contradict the flipped
class set up. I have experienced students receptiveness to this approach, which

Cad Cam Research Paper
CAD–CAM stands for computer–aided design (CAD) and computer–aided manufacturing (CAM) and it is used by dentists and dental laboratories to
provide patients with milled ceramic crowns, bridges, and etc. Many times dental CAD/CAM is used to fabricate abutments for dental implants, used
to replace missing teeth. The dental CAD/CAM technology have improved over the years. Today dental restorations are better fitting because of CAD
/CAM. They are also more durable and more natural looking (multi–colored and translucent, similar to natural teeth) than previously machined
restorations. Dental CAD/CAM technology can be used in dental offices or in dental laboratories. According to Vladimir Pavlov, CAD/CAM specialist
at Dani Dental Studio, the CAD/CAM

The Influence Of CAD On Society Essay
Before computers there were hands and tools. Before hands and tools there were just hands. Humans have always been designing and throughout
human history drafting is what became of it. With new technology in building during the earlier years drafting needed to be changed to accommodate
it. Humans have always been able to find better ways to accomplish things. Drafting is no different.
Before people used tools to draw something they went to what we call now a "General Contractor" with an idea and he had to come up with the rest.
After a while the contractors wanted more. Just an idea wasn't enough for them. Their clients sometimes wouldn't like what they had built for them. So
eventually the contractors asked ... Show more content on Helpwriting.net ...
It is difficult to sketch on the computer because the computer is so accurate (Friedman). It is not a good idea to draw a sketch accurately because
between a sketch and the final drawing things change drastically (Friedman). So it shouldn't be perfect. It should be something a drafter can interpret in
different ways.
To sketch a drawing an idea must first be thought of. Then once the idea has been thought of the drafter begins with a piece of graph paper and a
pencil. There are no tools needed for a sketch. The boxes on the graph paper can be used as a guide and a scale (Friedman). A sketch is just an
estimation of the real thing. So one just estimates, nothing else.
CADD is very hard to sketch in. Some of the more sophisticated programs have a function where the mouse can act like a sketch pencil (Bethune,
13). Although this seems like it might be like the pencil it is not. Mice are harder to keep straight and even the lightweight drawing tasks may make
the hand tired (Bethune, 13). Other ways of getting a sketch on the computer are scanners, electronic pens or touch pads. With the electronic pen, just
point at the screen and that is where the dot, line or shape shows up. However one moves the pen is what shows up. This can be hard because a
screen is at a weird angle, which makes drawing awkward. The touch pad however can be bought to the size of the screen. These

Archicad Essay
AutoCAD vs. ArchiCAD in Architecture Architectural design today has moved from designing by hand to designing with several different software
programs that have made the job much easier. Two of the main programs in many architectural firms today are AutoCAD2000 and ArchiCAD 6.5.
Both are very productive design tools but each has its own defects in certain areas of the design process. Design processes today have been reversed
from designing from the inside to the outside, to designing from the outside to the inside. Most designing today is based on the actual structural
appearance one will perceive from the exterior, rather than the functional use of the interior; although both are taken into consideration. AutoCAD is a...
Show more content on Helpwriting.net ...
One only produces a plan drawing when one has resolved the elevations and layouts. A plan really needs to grow out of the functional and
aesthetic requirements of a project. Yet ArchiCAD constrains one to work in plan from the start; from this the other views are created. This is
great for documentation but very constraining for the design process. AutoCAD bypasses this problem better by showing a simultaneous plan,
multiple elevations and sections, and of most importance, make the editing tools available in all views. For example, a parapet wall can be created
by shaping the wall in an elevational view, where as in ArchiCAD, one can either create it as a shaped library object to be inserted where required
or construct a false roof of the right height and pitch to which the wall can be trimmed. This demonstrates that AutoCAD is easier to use in this
aspect. The current sections and elevations in AutoCAD are only usable to trace over because they are missing a proper layer structure and the
possibility to be edited while still linked to the model. For instance, one should be able to add the windowsills on the elevations, even if they do not
appear in the three–dimensional mode. Or one should be able to compositionally crosshatch an elevation and have the hatch adjusted if the model is
changed. One should also be able to add things such as dimensions and annotations without having to add them in paper space, have

Advantages Of CAD Software
Introduction
What is CAD software?
CAD, or computer–aided design and drafting (CADD), is the use of computer technology for design and design documentation. CAD software replaces
manual drafting with an automated process.
CAD, or computer–aided design and drafting (CADD), is the use of computer technology for design drafting and also helpful in drawing different
CNC's designs. CAD software replaces manual drafting with an automated process. As we work in the architecture, MEP, or structural engineering
fields, we have probably used 2D or 3D CAD programs.
CAD (computer–aided design) software is used by architects, engineers, drafters, artists, and others to create precision drawings or technical
illustrations. CAD software can be used to create two–dimensional (2–D) ... Show more content on Helpwriting.net ...
Analysis with the help of SolidWorks Software:
As we know that there is a process of testing in each and every single model and product. From this software we are able to analyses each and every
aspects of our model and also able to find the failure point which will occur on the final product after the manufacturing.
SolidWorks widely used for the estimation of cost and calculations of bill of materials. It is very vast software used in field of production. It has so
many applications while it is a very vast and user friendly software and the editing feature in this software allow to edit some feature while the
assembly. SolidWorks is very useful and easy to learn.
пЃ¶We make a small change which make a difference between original mountain board and our product.
пЃ¶As the purpose of mountain board is to travel from upside of the mountain to the downward we can say it uses as the "Gravity vehicle".
пЃ¶We use a battery and motor assembly in our project to use it on field also rather than the mountain only.
пЃ¶The motor allow to the board to run smoothly on fields with the help of

The Opera Speculative Design Project
In this document I will evaluate, articulate and communicate my process and accomplishments within the Opera speculative design project. This
document will provide context for my designs and practical work evidenced in my journal and blog. In this project I will explore Juxtaposing themes,
musical and dramatic styles and characters through research, planning and execution.
We will also construct a set on one of two operas "L'Enfant et les Sortileges" by Maurice Ravel or "Lulu" byAlban Berg. The aims of the speculative
project are to create a "stand alone" design that will fit in NO 1 touring theatres that takes account of the orchestra pit and a one day fit up and
six–hour strike.
Alongside this we will design costumes for principle and ... Show more content on Helpwriting.net ...
After developing themes such as identity and animal behaviour we incorporated those ideas into manikins which would then be presented as a potential
puppet idea. Once we had a better understanding of the operas we then selected which opera we would like to do, and what project we would like to
design on. I chose to do "Lulu" By Alban Berg as a speculative design as it was the play I understood the most, I also wanted to develop my process
and craftsmanship skills.
After researching the play, I created a scene summery and a character list to refer to while designing. I also created a storyboard of scenes of
significance which gave me an idea of who was at the location and what was going on. I then started to develop my characters starting with a group
drawing, front, back and side drawings and Photoshop final images.
Once I had a clear image of my characters I then started to experiment within my model box for inspiration. Once I had a few ideas I then produced
some rough sketches, resulting in a final drawing. I then produced my set on auto cad so I had a good idea of scale and measurements resulting in a
final orthographic, side elevation and cutting list. After I had my measurements and rough drawings I then drew out the theatre royal in sketch–up and
did a scene by scene breakdown of the opera. With this visual aid I then started my set construction.
When I received the technical drawings of the

The Career Of Being A Fashion Designer
оїї
оїѕ
FASHION DESIGNER
THE CAREER OF BEING A FASHION DESIGNER
TRINITY ELISHIA MCKOY
JANUARY 9 , 2015
SUBMITTED TO
MR.KEVIN NELSON
EIGHTH GRADE HOUSE
COATS–ERWIN MIDDLE SCHOOL
NORTH CAROLINA–COMMON CORE
OBJ(S)8.W.1& 8.W.5
Trinity Elishia McKoy
8th Grade Eng/Language Arts
Mr.Kevin L. Nelson
January 9 ,2015
The career of being a Fashion Designer ?
Have you ever wondered what it would be like to be a fashion designer? Hopefully this will help you. The question is what exactly is a fashion
designer. " A Fashion designer is one who creates or adapts original designs forclothing for men , women , and children. Most specialize in one

particular type of clothing , such as women , dresses or men's suits , or in accessories such as handbags , hats , or jewelry.'' A fashion designer job
is very competitive , since you have other designers who specialize in the same thing as you. What makes a fashion designer important? A fashion
designer is a great need in the world. We as humans need clothes for every type of weather and occasion. Also clothes are made to express people
personality. Clothes are made so that we can be who we are and look stylish at the same time. That the fashion designer job is to make the clothes
unique and to hopefully fit someone personality besides theirs. A fashion designer job is to create. Since the fashion world is so widespread it is hard
for a fashion designer to be unique. They always have to keep up with

Advantages Of Cad Design
COMPUTER–AIDED DESIGN: Computer–Aided Design (CAD) is a direct development of the traditional drafting board approach to ship design.
CAD depicts geometry and dimensions on a computer monitor and not directly on paper, though an important output of CAD is still paper
drawings. Sophisticated CAD systems are much more powerful than computer versions of drafting boards. CAD is most appropriate for relatively
simple designs such as those developed in the smaller shipyards. For more complex designs, CAE and product model programs are more appropriate.
CAD systems have many capabilities, running from 2D line drawings to 3D solid geometry. Some of the capabilities are listed below Hull design: Hull
design may include the development of hull geometry,... Show more content on Helpwriting.net ...
Moment of inertia and section modulus are some examples. CAD may also be used to calculate tank areas and volumes, weight distribution diagrams
for loading, and hydrostatics and stability data. The early stage design can be done using a CAD software, and many such designing software
programs are available. AutoCAD, Autoship, Pro/Engineer, FastShip, MaxSurf are some of the software generally used. Excel a general purpose
spreadsheet program is applicable to many ship design calculations. COMPUTER–AIDED ENGINEERING: Computer–Aided Engineering (CAE)
automates various ship design calculations in the areas of hull and equipment. While the more typical CAE programs specialize in specific areas,
such as ship structure, some are modules of more integrated ship design programs and these form a basis to represent a link to product model
programs. In a class by itself are computer programs for the initial design and cost estimation. These programs are usually parametric, and produce
their technical and cost estimates based on historical data. These programs are used to produce initial designs for trade–off analysis, and for quick
initial response to ship–owner inquiries. CAE systems have some or all of the following

Overview Of Engineering In Me-37100: Computer Aided Design...
I have spent a semester learning about engineering in ME–37100: Computer–Aided Design course. As part of a class assignment, I read three articles
discussing the role of independent judgment in engineering. The articles I referred to are: "A Question of Credibility," by Jack Thornton, "The
Mathematical of Structural Engineers," by Julie Gainsburg and "How Engineers Lose Touch" by Eugene Ferguson. The purpose of this paper is to
relate the descriptions in these articles with my experiences in the course as well as my expectations in a career as engineer. The articles mentioned
earlier were very pleasant to read because the stories were really familiar. I am going to refer to Thornton's article which deals with Finite–Element
Analysis. ... Show more content on Helpwriting.net ...
The only way to set the problem correctly is to actually understand what the problem is. I had to analyze a pulley for an assignment in this course
and in order to set the problem properly I had to look at an actual pulley. In order to conduct a good FEA I need to have a good grasp of the real
world. Ferguson's article mentioned this: "Students took field trips to power plants, steel mills, heavy machine shops, automobile assembly plants, and
chemical works, where company engineers with operating experience helped them grasp the subtleties of the real world of engineering." (Ferguson
1993). I have never set foot in an factory or a company as a student engineer but I was fortunate enough during this course to have a professor that
bring actual objects to the classroom and help us set up experiment in order to better understand the physics of a problem. According to Ferguson, a lot
of engineers are disconnected from the real world and lack good judgment. In ME–37100 the professor always encouraged us to use our judgment
when we are dealing with software simulation and Ferguson's article is all about good judgment. As an engineer, it is imperative to exercise good
judgment because people's life and money are at stake. After the collapse of the Tacoma Narrows bridge, Sir Alfred Pugsley cited the cause as " the
un–wisdom of allowing a particular profession to become too inward

The Bim Capabilities And Bim Maturity Level
Project: To assess the BIM capabilities and BIM Maturity Level. Having established exiting BIM maturity level, propose measures for achieving level
2 BIM by 2016.
According to the Government Construction Strategy document in 2011, the "Government will require fully collaborative Level 2 3D BIM (with all
project and asset information, documentation and data being electronic) as a miniВ¬В¬В¬В¬В¬mum by 2016."
For the three weeks I am working at the London Bridge office of Jacob's, I intend to:
Understand exactly what BIM is and the basic criteria for each BIM level.
Evaluate where Jacob's is in relation to these BIM levels.
Suggest improvements as to how Jacob's can reach the Government's target by 2016.
The use of level 2 BIM in all public sector construction work is imperative as it affects everybody on a day to day basis. Using BIM software will
not only reduce the amount of time spent at the construction site, but it will also reduce costs due to errors. One of the current projects Jacob's is
working on using BIM software is the Crossrail (Europe's largest construction project). This will "increase London 's rail capacity by 10 per cent and
bring 1.5 million new commuters", not to mention bringing an estimated 42 billion to the UK economy and creating 30,000 jobs. Due to the use of
some aspects of BIM, the process of creating the Crossrail will not only be faster and more efficient but will also help the UK's economy.
1)Selection of Approach
How do I undertake this

Advantages Of Quality Product And Process Design
1.0Introduction Chapter 6 is Quality Product and Process Design. There are several topics to be discussed which are the designing products for quality,
the design process, Quality Function Deployment (QFD), technology in design, prototype, design for reliability and environmental considerations in
design. This chapter is going to focus on quality assurance. The purpose of this assignment is to understand clearly about the concept of product and
process design for quality, the method being used in designing products quality and apply the concept or method in real case. 2.0 Discussion 2.1
Designing Products for Quality In the stage of designing product, quality assurance is an important process in assessing to sustain with the requirement
standard. When designing the products, the company must identify the functions of the products that meet customers' need, the cost of production, any
inadequacy of materials and better materials to replace it. Design products for quality indicates to attain with the eight quality dimensions by David
Garvin. For example, serviceability is a significant dimension for laptop, then the design team has to examine the ways to repair in a lower cost. Kano
Quality Model (Figure 2.1) developed by Professor Noriaki Kano who clarified how the quality of the products meet the customer requirements and
satisfaction. The model... Show more content on Helpwriting.net ...
One of the benefits of QFD is customer driven. This help the companies to focus on the voice of the customers. Besides, QFD allows the companies to
analyze the competitors' products and services in the market place. Another benefit is lowering the cost and time for development. There will be
required minimum changes in the middle process of production. QFD also enables the companies fostering the teamwork. Organization functions such
as marketing and sales team, engineering team and production team need to work together. They have to communicate and find action at

Building Information Modeling : Bim
Building Information Modeling "BIM", is an intelligent, model based process for planning, designing, building and managing buildings and
infrastructures. BIM is a very powerful way for designers and architects to lay out building plans and designs. BIM is not just single piece of
software or model, but a system of information processing and collaboration, with data fixed within the model. BIM begins with a 3D digital model
of the building or infrastructure that is being planned out. However, the model that BIM provides is much more than just a 3D model. BIM
technology allows for the project managers, designers and architects to see virtual equivalents of all the buildings parts that are going to be used
throughout the entire construction process of the building. BIM brings together all of the information about every element of a building, and stores
all the data in one place. It allows anyone working on the project to access the data in order to integrate different aspects of the design more
effectively. BIM reduces the risk of mistakes which in turn helps to stay on budget and enhance efficiency. BIM data can be used to illustrate the entire
building life–cycle, from start to finish. Spaces, systems, products and sequences can be shown in comparative scale to each other. And by signaling
conflict detection BIM prevents errors from occurring at the various stages of development/construction. When BIM is utilized during a project, its
results in better communication which

Swot Analysis : Global Marketing
1. Introduction Global competition causes shortened life cycle for most products and companies can no longer take the polycentric approach to
international business. If a company takes the polycentric approach to a foreign market, a globally oriented competitor will overcome their initial
competitive advantages by blanketing the global markets with similar product in a short period of time. It is imperative for companies to acquire
capabilities to generate sustainable competitive advantages over their competitors. How to source globally is a critical strategic plan influenced by the
need to compete. In highly competitive markets, manufacturers either produce in low–cost locations or outsource their components from low–cost
producers on... Show more content on Helpwriting.net ...
Close coordination between R&D, manufacturing, and marketing activities across national boundaries is a requirement for global sourcing strategy
(Kotabe & Helsen, 2004, Chap. 10). However there are always conflicts due to different objectives between R&D, manufacturing, and
marketing. Excessive product modification for the ever–changing customer needs will forsake manufacturing efficiency and have negative cost effects,
except for perfectly flexible computer aided design and computer aided manufacturing facilities. CAD and CAM has improved tremendously in recent
years but the full benefit of flexible manufacturing still have a long way to go. However in the case of excessive product standardization in order to
lower manufacturing cost will have negative effects on customer satisfaction. Innovative product designs and feature desired by customer maybe a
technological feat but might not be conducive to manufacturing. Product design for manufacturability and product standardization has become
important strategic issues. It is imperative for companies to develop a sound sourcing strategy in order to exploit efficient R&D, manufacturing,
and marketing on global basis. Product designers, engineers, product managers, purchasing manager, among others play important roles in corporate
strategy development. As for car manufacturing, Toyota's global sourcing

I Want to Become an Architect
Ever since I was young, I have admired intricate buildings and structures. I have always appreciated a nice, well thought out home because I do
believe home is where the heart is. I have done lots of research on architecture, and what it takes to become an architect. I am naturally drawn to this
career because it requires lots of creativity and an eye for design. Being an architect also allows you to interact with people, which is important to me
because I am a social person. It also is a steady job and brings in a good salary.
Through research, I have learned what exactly architects do before starting projects, and while working on projects. A usual day for an architect usually
consists in two settings: the office, or sometimes the construction site where their idea is put to life. Usually in the office, they are meeting with clients,
preparing project specifications, and completing requirements and objectives for upcoming projects. They also have to know how to manage
construction contracts and create scaled drawings by hand however, preparing drawings by computer design technology is more common these days
with new advanced, efficient computer programs. The typical day in the office for an architect sounds nothing but ideal for me. One in five architects
is self–employed, which is a significant number of self–employed architects, and architects held 107,400 jobs in 2012. It would be ideal for me to be
self–employed in my future because I like to be the boss and I am very

Computer Aided Design ( Cad )
Introduction Computer Aided Design (CAD) has revolutionized the way that we design and manufacture products. Before software was created to
assist with drafting and design, engineers would draw the designs by hand using drawing boards. These drawing boards have a variety of tools to
assist the engineer drawing, including a try square, multiple stencils for accurate shapes, and many other tools. However, these drawings would take
a large quantity of time to make; really detailed drawings could potentially take months to draw. This is one of the biggest advantages of CAD over
drawing boards; it allows engineers to create drawings in a fraction of the time with minimal work. CAD is now being used in a large number of
manufacturing... Show more content on Helpwriting.net ...
It also allows designers to be very flexible with their designs, allowing multiple prototypes to be relatively quickly. Especially with the help of
CAM, prototypes are able to be made out of a cheaper material to test things like structural integrity. Reduction in Drawing and Production Errors
CAD has greatly reduced the amount of drawing and production errors. This is due to CAD programs allowing quick fixes to be made very quick
and easily. For example, if one of the dimensions of a shape is incorrect, they can be easily edited to be what they should be. CAD also gives a
variety of tools to prevent errors in the first place including, dimension tools, interference analysers, etc. Ease of Manufacturing The ease of
manufacturing has increased a large amount, due to CAD and CAM. CAM allows the user to simply import a CAD document, select the desired
settings and then the machine does the rest of the hard work. This allows companies to create products at an increased rate, whilst also retaining
quality. It also allows for prototypes to be manufactured easily, meaning designing is more flexible. Drawing Speed and Accuracy Drawing speed
and accuracy has improved due to CAD. This is because CAD is much more efficient, since instead of using a variety of tools like try squares,
stencils, etc., CAD allows these things to be done at the touch of a few buttons. It is also far more accurate,

A Career in Computer Aided Drafting Essay
According to Lucy Friend, "Computer Aided Drafters make $79,000 a year on average."(n.d.). Computer Aided Drafting unlocks the door to numerous
opportunities for employment; I selected Computer Aided Drafting because it's so extraordinary with AutoCAD, because of the uses of Computer
Aided Drafting, History of CAD, education requirements, and immeasurable career opportunities that are obtainable. First off, CAD is computer
technology that has contributed in design and drafting of a portion or an artifact and frequently a complete structure as well. Computer aided drafting
software is identified as CAD. It is fascinating and intriguing software because we can assemble a 3–D detailed view and that is very challenging to
envision without... Show more content on Helpwriting.net ...
The prehistoric technique of undertaking drafting application was on paper with a pencil and it required an extensive amount of time. They used a
drafting table with rulers and templates to draw the most detailed view they could. Technology in Computer Aided Design applications has transformed
and evolved to have numerous applications. For example; my dad used CAD in construction and remodeling. Remodeling kitchens and bathrooms with
CAD was an enormous necessity because the customer received an enhanced 3–D detailed view. They also use CAD for architectural structures, roads,
aircraft, ships, cars, digital cameras, TVs, aerospace, clothes, custom choppers, mobile phones, and even for landscaping. While history of CAD starts
out with a mathematician called Euclid from Alexandria in 350 B.C. CAD groundwork is established on geometry with postulates and axioms.
Drafting took abundant of hours to draw and if we made a miscalculation we would have to start all over. Next Sketchpad was invented in the 1960s by
Ivan Sutherland. Sketchpad was predominantly ground–breaking CAD software because the architect interacted with the computer graphically by
manipulating a light pen to sketch on the computers screen. New CAD technology called Sketchpad did procedures that can be accomplished in less
than millionth of a second instead of hours. No fundamental CAD software integrated such straightforwardness into its user interface. Sketchpad was
the preliminary CAD

Health And Safety Requirements For Computer Aided Drafting...
LO 1.1 Health & Safety Requirements for Computer–Aided Drafting and Design (CADD) Users. The current requirements for health and safety for
CADD users who use Visual Display Units (VDUs) for their work, is specified by the Health and Safety (Display Screen Equipment) Regulations
1992. In this section of the assignment, I will identify some of the most common health and safety concerns and specify the steps that employers
and employees need to follow in order to comply with the law and to work safely, including guidelines for workstations, work environment and
other equipment. Physiological Factors Affecting CADD Users VDUs is a term which encompasses monitors, display screen equipment (DSEs)
iPads etc; any screen (usually forming part of a computer) that displays text, numerical data, or graphics. VDUs have been accused of causing a
whole range of health problems, but in general these health issues arise as a result of VDUs being used incorrectly rather than the VDUs themselves.
One of the most commonly reported health issues relating to VDU usage is repetitive strain injury (RSI) however the cause is usually a more
generalised group of disorders known as 'upper limb disorders'. (Health and Safety Executive, 2011) Many of the disorders affecting the upper body
are exacerbated by stress that can be mitigated by making some simple changes to the work environment. Firstly, ensuring that employees have
undertaken the correct training in how to use hardware, software and

Bim Revolutionise Qs Profession
1) Introduction 2) Building Information Modelling (BIM), how it may revolutionise the QS profession 3) The Differences Between CAD and BIM 4)
Highlight and discuss the future strategic skills of QS due to the advent of BIM and such like 5) References Introduction Nowadays, the advent of
information technology era has ushered in Building Information Modelling (BIM). в–Є It is an innovative new approach to building design,
construction and management which has been introduced by AUTODESK (2002). в–Є BIM have an impact on most areas of business management
and operation. в–Є It changed the way industry professionals worldwide think about how technology can be applied to building design, construction and
... Show more content on Helpwriting.net ...
When we enter the supplier's information, automatically current price of the item will be inserted in the digital data information. The core process of
3D modelling for measurement produces model that can be divided for many other purposes at marginal cost. For instance в–Є clash detection, в–Є
construction sequences в–Є printing physical models в–Є presentation and visualisation, в–Є speeding up the process of understanding information
about the project в–Є communicating it to those who are not so adept at reading drawings Apart from that, the mode of communication between the
construction professionals also changed due to introduction of BIM in the construction industry. This is because, the building product model is used
as a tool to communicate with other professionals about costing where this situation will reduced the QS time spend in communicating with
architects, engineers, contractors and client. By using this building product model, people will get a clearer view in what the QS explained about.
Next, with the introduction of BIM, the progress of works in all stages will be reduced. This is due to the sophisticated software where any correction
on the drawing will be automatically updated on the building model and there is no need for other profession to revise

Evolution Of Cad And Cam Technology Systems Essay
The high request for ceramic restorations in the posterior and anterior areas has focused on the evolution of CAD and CAM technology systems. In
the early 1980s Pioneered by MГ¶rmann, the first CAD/CAM system called Cerec System started the era of CAD/CAM in dentistry. (MГ¶rmann,
2006) The CAD/CAM technology was powered by the improvement of computing power and specific recovery systems and milling machines.
Therefore, to avoid traditionally digital systems offer the opportunity and analogue impressions giving patient support and effective workflow. The
CAD/CAM systems are used in dental applications usually contain three components: 1. There is a digital scanner that changes the geometry into
digital information that can be prepared by the computer. 2. Software that processes information and, depending on the application, produces an
information set for the product to be created. 3. A production technology that converts the data set into the favourite product. (Shenoy and Prabhu,
2015) Computer Aided Design To produce 2D or 3D graphical pictures of the objects CAD is the best computer applications to use. CAD is more
used to design the products in a varied range of industries, where the software performs controls for defining the best structure and size for a diversity
of product and manufacturing design applications. The scanned documents are converted into the Stereolithography format. The CAD software
converts the implicit model into a unique set of

Components Of The Design Cycle
Core Paper Revision
Core
The Design Cycle (Situation through to Final design)
Ergonomics & Human Factors (Physiological, Psychological and Bio–mechanics)
Materials
Manufacturing process and techniques (Information on these is also shown in Materials section of app)
Energy, Green design and theEnvironment
CAM/CAD – Machines and software.
Quality control – Quality Assurance (QC and QA)
Design Process:
Cyclical – because it's a continuous process and the evaluation is in the middle because it is always the final end process in the design process.
1.Identify a Problem
2.Initial Process
3.Brief leading to specification
4.Specification leading to research
5.Research
6.Idea generation
7.Initial evaluation
8.Development ... Show more content on Helpwriting.net ...
Choosing the right timber is important depending on the application in which you intend to use the material.
Trees grow all over the world and their location very much depends on the environmental factors in play. Some trees like warm dry environments,
whilst others thrive in cold and wet locations.
How they are cut into usable sections and how they have been stored and processed can dramatically change their properties. The material can be cut
by 'Through and Through ' sawing. This process is the cheapest, but the way the grain is cut means that you get a lower quality timber that is more
difficult to use as it is prone to warping.
The second and more expensive way to cut material is by 'Quarter ' sawing. This process gives the best possible cut, but greatly reduces the size of
the pieces taken from a tree. The material is less prone to misshaping, yet due to the nature of the process is more expensive.

Metal:
Ferrous: contain iron; with iron as the odd one out, all the rest have the word 'Steel ' in them. For instance – stainless steel, mild steel and high carbon
steel.
Non–Ferrous: do not contain iron, good examples of Non– Ferrous metals are aluminium, copper, brass, tin and zinc
Alloys: most metals are mixed with other metals to improve their properties.
Metals are rarely used in their pure form, but mixing different metals together you can achieve the perfect material for

AO1 (a) investigating business' Actais and Longleat
Actaris & Longleat
::AO1 (a)::
Actaris:
1 year in existence, 100 years' experience
Created in November 2001, the Actaris group took over all the activities of Resource Management Services (RMS),
They are the only international group entirely dedicated to metering electricity, gas and heating. This is achieved by making and installing high quality
meters that measure these factors.
::Activities:
The main activities of the company are;
1) R+D (Research and development) into new and recent products is an important element in maintaining and improving the quality and efficiency of
the product. New technologies are used in the manufacture of the products to ensure that they are user friendly and are met to the specific needs of the
... Show more content on Helpwriting.net ...
In the case of the house the aims needed to be met are; to make people feel comfortable and enjoy themselves, to make people want to come back and
bring more people with them which leads me to the last aim of making a profit by up keeping and maintaining the house hold.
2) Safari Park. The safari park is a big money maker for Longleat as it attracts the most people. This is because the animals are in their natural
surroundings and not kept in cages, my doing this another aim is met, – raising awareness and presentation of Natural Environments. This is why years
on later and years to come the safari park has been extremely successful.

3) Maze. The hedge maze at Longleat is the largest in the world measuring in at a path way length of 1.69 miles and covering an area of 1.48 acres
setting a Guinness world record! This will attract people from all around the world which is meeting the aim to make people want to come back and
bring more people with them, causing a profit up rise.
4) Railway. The Longleat railway has a 1950's styled platform and theme, the passengers get a great view of the excellent surroundings, which will
attract customers to come back and visiting yet again another aim met.
5) Catering. Based in the old vaults of Longleat House, the Cellar CafГ© will help you restock your energy levels by enjoying some traditional
homemade Wiltshire fare.
The catering at Longleat has to be kept at a high

Statement Of Purpose Essay
Statement of Purpose
'Learning is like a ripple in the waters of an endless ocean'. This is one of my favourite percepts and for the past few decades, man has been
advancing into the unknown realms of technology and science. This advancement is to make life comfortable for humans at home and at work and I
would like to be an essential part of such enhancement. To accomplish this imposing task. I am aware that besides my strong dedication and hard work,
an eminent background in Computer Science is required. Therefore, I have decided to pursue masters in Computer Science, which will lead me to a
career of teaching and research.
I am very earnest towards assimilating knowledge to the greatest amplitude.
Effective teaching and proper guidance throughout ... Show more content on Helpwriting.net ...
Moreover, the technical challenges encountered in the graduate program will provide motivation and opportunity for methodological innovation. My
coursework along with my extensive Computer Science background will allow me to function well within the graduate program. I have many
ambitions for myself as I embark on this stage of my life. I believe that a graduate study will provide milestone in my career along with invaluable
experiences and skills that will allow me to become a successful, innovative professional and gives assistance to accomplish my goals."
My choice to do my graduation in the United States was strengthened by the fact that the United States had given innumerable scholars the opportunity
to bloom into pioneers and has long been acclaimed as the home of scientific study and is renowned for excellent interaction between it's industry and
academia.
The MS program in Computer Science offered by the University ____________ will undoubtedly provide me with the right knowledge, skills and
experience to pursue that dream and exploit the opportunities to the fullest extent. The practicalorientation of your in–depth coursework will allow me
to not only acquire a clear understanding of the subject but also the skills to execute it. I am confident

Electronic Market, Bar Coding, And Computer Aided Designs

Recommended

Recommended

More Related Content

Similar to Electronic Market, Bar Coding, And Computer Aided Designs

Similar to Electronic Market, Bar Coding, And Computer Aided Designs (14)

More from Christina Boetel

More from Christina Boetel (20)

Recently uploaded

Recently uploaded (20)

Electronic Market, Bar Coding, And Computer Aided Designs