2. Electrodeposition and Characterization of Copper Oxide Thin
Film for Solar Cell Applications
Submitted To:
Dr. Khurram Shahzad Munawar
Submitted By:
Shakeel Ahmad Khan (14003140007)
Program: MS (Chemistry) 3rd
Department of Chemistry, University of Management and
Technology Lahore
A.S.M. Sayem Rahman, M.A. Islam, and K.M. Shorowordi / Procedia Engineering
105 ( 2015 ) 679 – 685.
2
22
3. Basic idea about Copper oxide metal film
Importance of work
Aims of the Study
Research Methodology
Result and Discussion
a. Substrate coating study
b. EDS analysis
c. FESEM analysis
d. Fischer Durlscope Analysis
Conclusion and Future Aspects
Reference
List of Contents
3
4. Copper oxide thin film being considered thin film in solar cells
due to its photovoltaic properties as it have band gap 2.0 eV [1].
In this study, Copper oxide thin film electrodeposited on copper
substrate.
Electrodeposition process is a cheap process as compared to
Thermal Anodic, Chemical ionization, Reactive sputtering [2].
Figure 1: Copper oxide thin film
Basic idea about Copper oxide thin film
4
5. There are following factor which give rise the importance of this
work [3].
Importance of work
Copper Oxide
Thin Film
Time Saving
5
6. Objective of this study involve to synthesize Copper oxide thin
film by electrodeposition.
Objective of this study also involve to characterize them.
EDS FESEM Fisher Durlscope
Objective of this Study
6
7. Research Methodology
1. Synthesis of Copper thin film when Pt act as anode and Copper
is cathode [4].
Time: 10-50 min, Temperature: 40-60ºC, Deposition potential: -0.45 to -0.65
3M Lactic acid
10% HNO3
Pt
7
8. Research Methodology
2. Synthesis of Copper thin film when Copper is anode and gold
coated glass cathode [5].
Time: 10-50 min, Temperature: 40-60ºC, Deposition potential: -0.45 to -0.65
3M Lactic acid
10% HNO3
Au
8
9. Research Methodology
3. Synthesis of Copper thin film when Copper is anode as well as
cathode [6].
Time: 10-50 min, Temperature: 40-60ºC, Deposition potential: -0.45 to -0.65
3M Lactic acid
10% HNO3
9
10. Result and Discussion
Figure:1 Coating of substrate deposited with (a) Pt anode and Cu
Cathode, (b) Cu anode and Au cathode, (c) Cu anode and Cu
cathode.
10
(a) Pt anode and Cu cathode (b) Cu anode and Au cathode (c) Cu anode and Cu cathode
11. Figure 2. EDS analysis of the sample deposited with Cu cathode
and Pt anode. Zn k
Result and Discussion
11
Al k
Cu k
12. Figure 3. EDS analysis of the sample deposited with Cu cathode
and Cu anode at different deposition potential (a) -0.45V
(b) -0.50V (c) -0.55V
Result and Discussion
12
Cu k
O k
Cu k
O k
13. Figure 4. EDS analysis of the sample deposited with Cu cathode
and Cu anode at different deposition potential (a) -0.45V
(b) -0.50V (c) -0.55V
Result and Discussion
13
Cu k
O k
O (c)> O (b) > O (a)
-0.55V>-0.50>-0.45V
14. Figure 5. SEM images of (a) Cu substrate without coating and
with (b) Pt coating [7].
(a) Cu substrate without coating (b) Cu substrate with Pt coating
Result and Discussion
14
15. Figure 6. SEM images of (a) Cu substrate with Cu coating at
different deposition potential (a) -0.45V (b) -0.50V (c) -0.55V [7].
Result and Discussion
15
16. Fig. 7. Effect of deposition parameters such as (a) Time (b)
Temperature (c) Concentration of CuSO4.5H2O and (d) operating
voltages on the thickness of Cu film.
Result and Discussion
16
17. Copper oxide mainly cupric oxide are formed during
electrochemical deposition process.
The structural and optical properties of as deposited copper oxide
evaluated.
Concentration of CuSO4.5H2O and operating voltage, both
increases copper oxide film thickness.
Copper oxide film thickness increases with the increment of time.
Future Aspects
To make some strategies to produce
on commercial scale.
To check the photovoltaic properties
by formation of Solar cell from them.
Conclusion
17
18. Longchengwang, (2006). “Preparation and characterization of properties of
electrodeposited copper oxide films.” The university of texas at arlingto, 12 (1-
5).
Rai B.P, (1988). “Cu2O solar cells”. Sol. Cells, 25-265.
Wilmam Septina, “Electrochemical deposition of Cuprous oxide layer and their
solar cell properties”, 2.
Jayanettie J.K.D., Dharmadasa I. M, (1996). “Solar energy, material and solar
cells”, (44)251-260.
Rakhshani A.E., and Jassur, A.A. Aland. Varghese J., (1987).
“Electrodeposition of cuprous thin solid films”, (148)191-201.
Verkageorgieva, Atanas Tanusevski and Marina Georgieve, “Low cost solar
cells based on cuprous oxide”, 55-56.
V.F. drobny and D.L. Pulfrey, (1979). “Thin solid films”,
(61)89-98.
References
18