chaitra-1.pptx fake news detection using machine learning
ELCANAL FOR INSPECTION & SUPPLIES
1. 064-3348386Tel. & Fax:
01004063460Mobile :
208 st. El-Makhbaz El-Ally ,el salam district front of second PD , Ismailia, EgyptAddress :
mohamedfawzy07@hotmail.comE - Mail :
El-Canal For
Inspection and Supplies
"Company Profile"
4. 064-3348386Tel. & Fax:
01004063460Mobile :
208 st. El-Makhbaz El-Ally ,el salam district front of second PD , Ismailia, EgyptAddress :
mohamedfawzy07@hotmail.comE - Mail :
INSPECTION SERVICES & NON DESTRUCTIVE TESTING
1. (NDT Testing method)
Our NDT Section is a group of engineers, consultants and technicians dedicated to the
development and successful implementation of the full spectrum of non-destructive testing.
The aim is to give cost saving and reliability assurance to customers by interfacing with
updated related technologies.
Non-destructive testing can be used preventively and to improve safety:
• Can be performed without production interruptions
• Often quickly to prepare and easy to carry out
• Provides precise documentation for compliance with quality requirements
• Complies with current standards and regulatory requirements.
• Cost savings and safety assurance on industrial plant maintenance
• Problem solving by qualified engineers
Non-destructive testing is used to ensure quality within many different businesses and
industries such as:
• The energy sector
• The offshore/ onshore industry
• Offshore/ Onshore Rigs
• The shipbuilding industry
• The chemical and petrochemical industries
5. 064-3348386Tel. & Fax:
01004063460Mobile :
208 st. El-Makhbaz El-Ally ,el salam district front of second PD , Ismailia, EgyptAddress :
mohamedfawzy07@hotmail.comE - Mail :
2. THIRD PARTY INSPECTION
We provide an extensive range of third party vendor inspection related services to
engineering and procurement clients on a global basis. Qualified personnel offer experience
in supplier assessments, inspection, expediting, project personnel outsourcing, destructive
and non-destructive testing and coordination. This helps customers to reduce costs whilst
adhering to technical and commercial requirements.
The service aims to control, at the premises of the manufacturer or sub contractor, the
quality of workmanship and the conformity of the manufacture equipment with the purchase
specification.
We can perform qualified welder and tech. as well as necessary tools with equipment to
cover wide range of welding work.
• Destructive testing
• Weldability study
• Make and review welding procedure qualifications WPS and PQR as per applicable
code and standards
• Witness the procedure qualification records PQR
• Witness welders performance qualifications WPQ
• Perform the welding inspection as third part and /or client representative
• Issue reports of the performed inspection
NotesWelding Consultations Services
all the tests will be evaluated in:
The Mechanical Testing Lab.
Metallurgical Engineering
Cairo University
Faculty of Engineering
Faculty of Engineering
Welder qualification record (WQR)
Welding qualification record (PQR)
&
Welding procedure specification (WPS)
6. 064-3348386Tel. & Fax:
01004063460Mobile :
208 st. El-Makhbaz El-Ally ,el salam district front of second PD , Ismailia, EgyptAddress :
mohamedfawzy07@hotmail.comE - Mail :
Technical Support Services
they aremay satisfy its desires andservices companies whichneedsCustomerVision:
looking for company which may answer this, El Canal adjust itself to be one of these
companies with providing services which is rare sector .
ality service with low price .high quProvideMission:
1. Welding electrode qualifications and selections according to the codes and
standards:
Perform tests (chemical & mechanical) on the welding electrodes/filler wire via
welding operations according to the codes and the standards.
Welding electrode qualification record according to the results from the welding
specimens.
Technical support for the welding electrode selection tenders.
Publishing the technical papers about the welding electrode qualifications and
selections and it will be cooperation between the customer and the office.
2. Technical support for the welding techniques selection and repair
procedures :
Types of welding techniques Training courses for welders and technicians.
Welding codes and standards training courses for engineers and technicians.
Codes, standards and quality control, quality assurance training courses for
engineers.
Technical consulting services and equipments supplying during the projects .
Quality control and quality assurance services during the projects.
7. 064-3348386Tel. & Fax:
01004063460Mobile :
208 st. El-Makhbaz El-Ally ,el salam district front of second PD , Ismailia, EgyptAddress :
mohamedfawzy07@hotmail.comE - Mail :
3. Technical and scientific cooperation in the projects:
Sharing the results of the procedure qualification record of the testing specimen
and publishing technical papers about this tests
Technical support for the trouble shooting in the projects
Perform Qualification record procedures for the welding electrodes and the
material
Supply the qualified engineers and technicians
Perform the Welder qualification tests (WQT) and the welding procedure
qualification records (PQR) operation.
Perform the welding inspection and technical support as third part and /or client
representative
8. 064-3348386Tel. & Fax:
01004063460Mobile :
208 st. El-Makhbaz El-Ally ,el salam district front of second PD , Ismailia, EgyptAddress :
mohamedfawzy07@hotmail.comE - Mail :
.Special repair & hard facing tech
SURFACING,:
as applied to welding technology, refers to the deposition of a filler metal on a base metal
(substrate) to impart some desired property to the surface that is not intrinsic to the
underlying base metal.
There are several types of Surfacing:
Hard facing, buildup, weld cladding, and buttering.
Special repair or dissimilar metal joining:
Because various portions of a process system operate at different service conditions,
different structural alloys are used in the design, and hence, dissimilar-metal welded joints
may be required. Many factors must be considered when welding dissimilar metals, and the
development and qualification of adequate procedures for the various metals and sizes of
interest for a specific application must be undertaken.
So, EL-CANAL provides the technical support for the previous operations in the following :
• Welding electrode qualifications and selections according to case study.
• Technical support for the welding techniques selection, and repair procedures.
• Equipments and man power supplying during the repair projects.
With a guarantee form with renewal each six month with inspection from the office with a
technical report contains an inspections methods which been applied during the repair
operation.
9. 064-3348386Tel. & Fax:
01004063460Mobile :
208 st. El-Makhbaz El-Ally ,el salam district front of second PD , Ismailia, EgyptAddress :
mohamedfawzy07@hotmail.comE - Mail :
Lifting inspection
El Canal ensures the safe and efficient operation of your equipment and assets regulations by
detecting defects before they cause a severe damage, and assures compliance with
regulations and relevant standards. We maintain a user-friendly data base system, assuring
you immediate access to certification and testing reports wherever you are, whenever you
require.
As a leading supplier, we are accredited to perform conformity assessments, as well as
statutory and voluntary inspections on cranes, hoisting and lifting equipment across the
world.
Plus, we can also provide training for operators of cranes and elevating platforms in
accordance with local and international standards.
• Our crane, hoisting and lifting equipment inspection services include:
• Checking of brakes, clutches, sheaves, and wire rope assemblies
• Design studies and calculation reviews Dynamic and static load testing
• Inspection of all the structural load bearing members, including sheaves Checking
crane girders, rails and columns of overhead cranes to assure structural integrity Line
level and span crane gantry surveys
• Non-destructive testing (NDT) of load hooks for cracks and visual inspections for
distortions
• Operational tests to assure that your unit is functioning properly Periodic inspections
and inspection prior to use of mechanical, structural, electrical, and safety systems, as
• well as of wire ropes and chains
• Re-examination of all safety devices Regulatory compliance assessments
• Remnant life assessment Repairs supervision
10. 064-3348386Tel. & Fax:
01004063460Mobile :
208 st. El-Makhbaz El-Ally ,el salam district front of second PD , Ismailia, EgyptAddress :
mohamedfawzy07@hotmail.comE - Mail :
and Scientific Training Courses:Engineering
The fast growth of scientific and technological knowledge has made continuing education
essential for those engineers who want to remain updated in their fields. Some of the
courses provide an introductory overview of a given area while others provide the latest
information on a specialized topic such as :
• NDT methods and inspection technology
• VALVES: MAINTENANCE AND OPERATION
• CWI orientation course
• Mobile crane inspection course
• Lifting Fundamentals
• BASIC WELDING FILLER METAL TECHNOLOGY
• Hydraulic Control Systems – Electro-Hydraulics
Who Should Attend
The courses are designed for engineers and scientists who are working in industry,
governmental agencies, universities and research institutes to strengthen their background in
a given topic.