Eim mortuar yfreezer3-tf
•
0 likes•207 views
This document provides specifications for a mortuary freezer model MFZ-3TF. It is a -25 degree Celsius freezer with internal and external chambers made of stainless steel. It has digital temperature control and alarm functions. The document lists detailed technical specifications including dimensions, materials, temperature range, refrigeration system, voltage, and distributor information.
Report
Share
Report
Share
Download to read offline
Recommended
PCM Thermal Energy Storage Systems; Ashrae 2004 Conference Paper
The document discusses positive temperature eutectic (PCM) thermal energy storage systems. It begins by explaining the disadvantages of conventional water-ice storage systems, which require low-temperature chillers. The document then introduces positive temperature eutectic solutions, which can freeze and melt above 0°C, overcoming these disadvantages. Various PCM mixtures are presented, along with encapsulation techniques to contain them. The document argues that PCM storage enables higher evaporator temperatures and lower condenser pressures, improving energy efficiency. A variety of applications are proposed, including utilizing chilled water and refrigeration temperature ranges for charging.
Mohini kataria copy
This document provides an overview of refrigeration concepts and components. It defines key terms like temperature, pressure, heat, latent heat and refrigerants. It describes the basic refrigeration circuit, including the evaporator, compressor, condenser and expansion process. It explains how refrigerants absorb heat during evaporation to produce cooling, and how the compressor pressurizes the refrigerant to drive the process.
Thermal system design 3
This document outlines the design of a cascade refrigeration system to freeze food in a 40-ton storage room at -35°F. It proposes using R-410a for the high-stage cycle and R-134a for the low-stage cycle. Heat load calculations determine the total required cooling is 179,485 BTU/hr. Analysis of the refrigeration cycles sizes the R-410a compressor at 18 kW and the R-134a compressor at 5.18 kW. The conclusion recommends installing an 18-ton refrigeration system with a 20% safety margin over the calculated 15-ton requirement.
Design and Fabrication of Vapour Absorption Refrigeration System [Libr-H20]
Most of the energies are utilized by the industries due to depletion of fossil fuels and
increasing the fuel price to exploit the maximum presented energy from the waste heat source. The
industry which utilizes steam turbine exhaust carries a considerable amount of thermal energy. This
energy can be set in to positive use as a heat source for vapour absorption system to serves as cooling
system. This paper illustrates the thermal and fiscal advantages of using single effect lithium bromide
water absorption by means of waste heat. The objective of this work is to hypothetical design of lithium
bromide water absorption Refrigeration system using waste heat from any industry steam turbine
exhaust
Refrigeration
INTRODUCTION AND BASICS OF REFRIGERATION
REFRIGERANT SELECTION CRITERIA (ASHRAE STANDARD)
AUXILLARY EQUIPMENTS IN REFRIGERATION CYCLE
LOAD CALCULATION (PEAK LOAD AND AVERAGE LOAD)
PRILIMINARY PROCESS DESIGN
EQUIPMENT DESIGN AND SPECIFICATION
SPECIFICATION OF COMPLETE REFRIGERATION PACKAGE
P & ID TYPICAL REFRIGERATION PLANT
START-UP AND SHUT-DOWN
TROUBLE SHOOTING AND CHECKLIST
Refrigeration Design Technologies
The document discusses Refrigeration Design Technologies, an independent refrigeration company with 45 years of experience. It highlights the company's commitment to quality design using high-quality components. It also notes responsive engineering and sales departments to efficiently meet customer needs. The document then lists some of Refrigeration Design Technologies' consultant customers and product lines, which include various types of refrigeration compressors, remote refrigeration applications, and an Eco-Cool refrigeration system that provides increased energy efficiency and redundancy compared to a conventional system.
Refrigeration
refrigration system, types of refrigrants, their properties, Vapour compression cycle, superheating , subcooling, cascade refrigratioin systems, vapour absorbtion system , problems
Seminar presentation on Vapour Compression Refrigeration
This document provides an overview of a seminar on vapour compression refrigeration. The seminar was guided by Mr. Devendra Bhandari and prepared by Ujjwal Nautiyal. It discusses the basic principles of refrigeration including how refrigerants are used to extract heat from refrigerators and reject it to the atmosphere. It then describes the key components of a refrigeration system including the evaporator, compressor, condenser, and expansion valve. The document outlines the refrigeration cycle process and concludes by discussing advantages like high efficiency and disadvantages like use of ozone depleting refrigerants.
Recommended
PCM Thermal Energy Storage Systems; Ashrae 2004 Conference Paper
The document discusses positive temperature eutectic (PCM) thermal energy storage systems. It begins by explaining the disadvantages of conventional water-ice storage systems, which require low-temperature chillers. The document then introduces positive temperature eutectic solutions, which can freeze and melt above 0°C, overcoming these disadvantages. Various PCM mixtures are presented, along with encapsulation techniques to contain them. The document argues that PCM storage enables higher evaporator temperatures and lower condenser pressures, improving energy efficiency. A variety of applications are proposed, including utilizing chilled water and refrigeration temperature ranges for charging.
Mohini kataria copy
This document provides an overview of refrigeration concepts and components. It defines key terms like temperature, pressure, heat, latent heat and refrigerants. It describes the basic refrigeration circuit, including the evaporator, compressor, condenser and expansion process. It explains how refrigerants absorb heat during evaporation to produce cooling, and how the compressor pressurizes the refrigerant to drive the process.
Thermal system design 3
This document outlines the design of a cascade refrigeration system to freeze food in a 40-ton storage room at -35°F. It proposes using R-410a for the high-stage cycle and R-134a for the low-stage cycle. Heat load calculations determine the total required cooling is 179,485 BTU/hr. Analysis of the refrigeration cycles sizes the R-410a compressor at 18 kW and the R-134a compressor at 5.18 kW. The conclusion recommends installing an 18-ton refrigeration system with a 20% safety margin over the calculated 15-ton requirement.
Design and Fabrication of Vapour Absorption Refrigeration System [Libr-H20]
Most of the energies are utilized by the industries due to depletion of fossil fuels and
increasing the fuel price to exploit the maximum presented energy from the waste heat source. The
industry which utilizes steam turbine exhaust carries a considerable amount of thermal energy. This
energy can be set in to positive use as a heat source for vapour absorption system to serves as cooling
system. This paper illustrates the thermal and fiscal advantages of using single effect lithium bromide
water absorption by means of waste heat. The objective of this work is to hypothetical design of lithium
bromide water absorption Refrigeration system using waste heat from any industry steam turbine
exhaust
Refrigeration
INTRODUCTION AND BASICS OF REFRIGERATION
REFRIGERANT SELECTION CRITERIA (ASHRAE STANDARD)
AUXILLARY EQUIPMENTS IN REFRIGERATION CYCLE
LOAD CALCULATION (PEAK LOAD AND AVERAGE LOAD)
PRILIMINARY PROCESS DESIGN
EQUIPMENT DESIGN AND SPECIFICATION
SPECIFICATION OF COMPLETE REFRIGERATION PACKAGE
P & ID TYPICAL REFRIGERATION PLANT
START-UP AND SHUT-DOWN
TROUBLE SHOOTING AND CHECKLIST
Refrigeration Design Technologies
The document discusses Refrigeration Design Technologies, an independent refrigeration company with 45 years of experience. It highlights the company's commitment to quality design using high-quality components. It also notes responsive engineering and sales departments to efficiently meet customer needs. The document then lists some of Refrigeration Design Technologies' consultant customers and product lines, which include various types of refrigeration compressors, remote refrigeration applications, and an Eco-Cool refrigeration system that provides increased energy efficiency and redundancy compared to a conventional system.
Refrigeration
refrigration system, types of refrigrants, their properties, Vapour compression cycle, superheating , subcooling, cascade refrigratioin systems, vapour absorbtion system , problems
Seminar presentation on Vapour Compression Refrigeration
This document provides an overview of a seminar on vapour compression refrigeration. The seminar was guided by Mr. Devendra Bhandari and prepared by Ujjwal Nautiyal. It discusses the basic principles of refrigeration including how refrigerants are used to extract heat from refrigerators and reject it to the atmosphere. It then describes the key components of a refrigeration system including the evaporator, compressor, condenser, and expansion valve. The document outlines the refrigeration cycle process and concludes by discussing advantages like high efficiency and disadvantages like use of ozone depleting refrigerants.
Final presentation
This document provides an overview of designing an air conditioning system using AutoCAD MEP software. It discusses the basic components of an AC system, classifications of AC systems, the refrigeration cycle principle, objectives of AC design, HVAC design workflow, design methodology using AutoCAD MEP, features of the software, components like the air handling unit and distribution system, load estimation, and presents the design solution for a conference hall. The goal is to study AC workings and design an economical system using Building Information Modeling and AutoCAD MEP.
Energy Conservation Building Code ECBC
The document discusses India's Energy Conservation Building Code (ECBC). It was enacted by the Government of India in 2001 to provide energy efficiency in building design and construction. The ECBC provides minimum requirements for building envelopes, lighting, HVAC systems and other components to significantly reduce energy usage. Compliance with the ECBC can save 30-60% of electricity usage in commercial buildings. While currently voluntary, states can make compliance mandatory for large commercial buildings. The document outlines the various provisions of the ECBC regarding building envelopes, lighting, HVAC and other systems.
Basic Mechanical Engineering - Refrigeration
This document provides information about refrigeration and refrigeration systems. It discusses:
- The definition of refrigeration as the process of removing heat from a substance under controlled conditions.
- The main components and functioning of vapor compression refrigeration systems, including the compressor, condenser, expansion valve, and evaporator.
- Other types of refrigeration systems like air refrigeration and vapor absorption systems.
- Properties and examples of common refrigerants like ammonia and fluorocarbons.
- Key refrigeration concepts such as the coefficient of performance (COP) and units of refrigeration capacity.
- Major applications of refrigeration including food preservation, air conditioning, and industrial uses.
vapour compression refrigeration system
The document summarizes the key components and process of a vapor compression refrigeration system. It consists of 4 main components: an evaporator, compressor, condenser, and expansion valve. The refrigerant is evaporated in the evaporator, compressed to high pressure in the compressor, condensed to liquid in the condenser, then expanded to low pressure through the expansion valve before repeating the cycle. The system uses the phase change of refrigerants to absorb heat in the evaporator and reject heat in the condenser to achieve refrigeration. Common refrigerants used include chlorofluorocarbons.
Cooling load calculations and principles
This document provides an overview of cooling load calculations and principles. It discusses terminology related to heat transfer and load calculations. It explains how to properly size air conditioning systems and notes some key differences between heating and cooling load calculations. Specifically, cooling load calculations must account for unsteady state processes and consider internal heat sources, while heating load calculations typically assume steady state conditions and neglect internal sources. The document also differentiates between various heat flow rates including space heat gain, space cooling load, space heat extraction rate, and cooling load at the coil. It discusses components of cooling loads including sensible and latent heat gains. Finally, it provides an example calculation methodology and examples.
Refrigration & air conditioning
This document provides an overview of refrigeration and air conditioning systems. It begins by explaining that refrigeration and air conditioning are used to cool products or environments. It then discusses the basic refrigeration cycle involving heat absorption and rejection. The document outlines different types of refrigeration systems, including vapor compression and vapor absorption. It also describes window air conditioners and split air conditioners. The working of a split AC is explained, noting that it splits the hot and cold sides with the evaporator inside and condenser outside. In closing, the document thanks the reader for their attention.
Refrigeration And Air Conditioning
This document provides an overview of a training session on energy equipment refrigeration and air conditioning systems. It discusses types of refrigeration including vapor compression and vapor absorption. It also covers assessing the performance of refrigeration and air conditioning systems, such as measuring tons of refrigeration and coefficient of performance. Finally, it lists several energy efficiency opportunities for refrigeration and AC systems, such as optimizing heat exchange, multi-staging systems, and capacity control of compressors.
Brain Anatomy
The human brain is divided into three main parts - the cerebrum, cerebellum, and brain stem. The cerebrum is responsible for higher functions like thinking and reasoning. It is divided into four lobes - frontal, parietal, temporal, and occipital. The cerebellum coordinates movement and balance while the brain stem regulates basic functions vital for survival like breathing. The brain is protected by meninges and ventricles circulate cerebrospinal fluid. Key structures include the limbic system for emotions and memory and the hypothalamus which regulates hormones and homeostasis.
12 Cooling Load Calculations
This document discusses cooling load, which is the thermal energy that must be removed from a space to maintain comfort conditions. It outlines various components that contribute to cooling load, including heat gains from enclosure elements, internal loads, and outdoor air. Key terms are defined, such as cooling load temperature difference (CLTD) and cooling load factor (CLF), which are used to account for time delays in radiation and conduction gains. Methods for calculating cooling loads from walls, roofs, glazing, lighting, people and other internal sources are presented.
Bench Top Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
1800 °C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. For More Information Please Logon http://goo.gl/SPzT1r
Paintbooth AutoOneIndia Call 09953353481
This document provides specifications for a paint booth, including details on its filter stages, dimensions, construction materials, electrical components, and technical parameters. The paint booth uses pre-filters, ceiling filters, and floor filters of varying materials and particle holding capacities. It has a positive pressure vertical down draft air flow of 22,000 cubic meters per hour. Components include inlet and exhaust blowers, a heat exchanger, burner, and control panel.
Miyo_2016 presentation
Miyo Technology is a manufacturer of flexible heaters that provides heating solutions to various industries. They have two production sites in Taiwan and produce over 2.5 million flexible heaters per year. Their products include polyester, polyimide, and silicone rubber heaters that can withstand temperatures up to 230°C and power densities of 8W/cm2. Miyo works closely with customers to customize heaters through design, integration of sensors, and electrical terminations.
ETA IR Oven Introduction
ETA IR oven is cost-effective Curing Oven produced by ETA, mainly to deal with the application of glue curing, special soldering,SMD testing, Anti-corrosion paint dry, radiator welding.
For More SMT Equipments Plz Contact at etasmt@foxmail.com or eta@eta-ele.com (Shanny)
WebSite: www.smt11.com
Five zones split tube furnace with 80 mm
Five Zones Split Tube Furnace is a CE certified split 80mm OD (3" I.D) Five-zone tube furnace which can achieve faster heating up to 1200oC and create smooth thermal gradient or one uniform constant temperature zone by adjust four zone temperature.
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
This document provides specifications for the IHH-ST1A/ST1D heated hose, including its construction, technical data, and performance capabilities. It has a maximum operating temperature of 100°C, uses a resistance heating cable and Pt100 sensors for temperature control, and can be customized for special applications that require variations in size, materials, pressures, or voltages. The standard versions are available in nominal diameters from 4-13 mm with power ratings up to 110W/m.
Bench Top Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
Bench top muffle furnaces are excellent for quantitative analysis and organic and inorganic ashing applications.For More Information Please Logon http://goo.gl/J1R4Yf
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
The document describes a heated hose called IHH-ST4A/ST4D for transporting liquid and gaseous media with maximum operating temperature of 400°C. It has a corrugated stainless steel inner hose, stainless steel braiding, thermal insulation of high temperature fleece and silicone foam, and a soft EPDM outer covering. Built-in Pt100 sensors allow for temperature control and the resistance heating cable provides homogeneous heat distribution. Standard versions are available in various sizes and custom designs can be specified upon request.
Eu Air Handling Unit Gb 200809
This document describes modular air handling units (AHUs) and their components. It discusses the EU size ranges from 0.2-34 m3/s and their casing, dampers, filters, coils, heat recovery, fans, and silencers. It provides details on materials, performance standards, installation, and maintenance for these various components. The purpose is to outline the technical specifications and options for modular AHUs to assist in selection and documentation.
Catalogue berjaya info made in Malaysia
Catalogue berjaya info thông tin sản phẩm berjaya malaysia
hàng chất lượng cao được nhiều khách hàng tin dùng sản phẩm xịn sò giá rẻ
Vacuum Oven - Laboratory or Process Scale
Vacuum ovens are utilized for heat treatment of items that may degrade quickly when heated in the presence of oxygen.
E68 brochure Thermal Insulating Aluminum System
The document describes the E68 window and door system which features a thermal break for improved insulation. It comes in four efficiency levels from 1.9 to 1.6 W/m2K depending on the sash and gasket configurations. The 68mm wide system uses additional insulators in the thermal break chamber and polyamide seals to provide excellent thermal insulation while maintaining an elegant straight design for medium and large openings.
Vertical Muffle Furnace (1200 °C) by ACMAS Technologies Pvt Ltd.
This document provides specifications for a 1200°C muffle furnace. It has a working temperature of 1120°C and maximum temperature of 1200°C. Temperature is controlled via a PID controller with accuracy of +/-1°C and it can be programmed with 30 segments up to 1100°C. The furnace has a 4"x4"x4" chamber made of high purity fibrous alumina with gas inlet and outlet ports. It is ideal for applications like heat treating and ignition testing that require temperatures up to 1100°C.
More Related Content
Viewers also liked
Final presentation
This document provides an overview of designing an air conditioning system using AutoCAD MEP software. It discusses the basic components of an AC system, classifications of AC systems, the refrigeration cycle principle, objectives of AC design, HVAC design workflow, design methodology using AutoCAD MEP, features of the software, components like the air handling unit and distribution system, load estimation, and presents the design solution for a conference hall. The goal is to study AC workings and design an economical system using Building Information Modeling and AutoCAD MEP.
Energy Conservation Building Code ECBC
The document discusses India's Energy Conservation Building Code (ECBC). It was enacted by the Government of India in 2001 to provide energy efficiency in building design and construction. The ECBC provides minimum requirements for building envelopes, lighting, HVAC systems and other components to significantly reduce energy usage. Compliance with the ECBC can save 30-60% of electricity usage in commercial buildings. While currently voluntary, states can make compliance mandatory for large commercial buildings. The document outlines the various provisions of the ECBC regarding building envelopes, lighting, HVAC and other systems.
Basic Mechanical Engineering - Refrigeration
This document provides information about refrigeration and refrigeration systems. It discusses:
- The definition of refrigeration as the process of removing heat from a substance under controlled conditions.
- The main components and functioning of vapor compression refrigeration systems, including the compressor, condenser, expansion valve, and evaporator.
- Other types of refrigeration systems like air refrigeration and vapor absorption systems.
- Properties and examples of common refrigerants like ammonia and fluorocarbons.
- Key refrigeration concepts such as the coefficient of performance (COP) and units of refrigeration capacity.
- Major applications of refrigeration including food preservation, air conditioning, and industrial uses.
vapour compression refrigeration system
The document summarizes the key components and process of a vapor compression refrigeration system. It consists of 4 main components: an evaporator, compressor, condenser, and expansion valve. The refrigerant is evaporated in the evaporator, compressed to high pressure in the compressor, condensed to liquid in the condenser, then expanded to low pressure through the expansion valve before repeating the cycle. The system uses the phase change of refrigerants to absorb heat in the evaporator and reject heat in the condenser to achieve refrigeration. Common refrigerants used include chlorofluorocarbons.
Cooling load calculations and principles
This document provides an overview of cooling load calculations and principles. It discusses terminology related to heat transfer and load calculations. It explains how to properly size air conditioning systems and notes some key differences between heating and cooling load calculations. Specifically, cooling load calculations must account for unsteady state processes and consider internal heat sources, while heating load calculations typically assume steady state conditions and neglect internal sources. The document also differentiates between various heat flow rates including space heat gain, space cooling load, space heat extraction rate, and cooling load at the coil. It discusses components of cooling loads including sensible and latent heat gains. Finally, it provides an example calculation methodology and examples.
Refrigration & air conditioning
This document provides an overview of refrigeration and air conditioning systems. It begins by explaining that refrigeration and air conditioning are used to cool products or environments. It then discusses the basic refrigeration cycle involving heat absorption and rejection. The document outlines different types of refrigeration systems, including vapor compression and vapor absorption. It also describes window air conditioners and split air conditioners. The working of a split AC is explained, noting that it splits the hot and cold sides with the evaporator inside and condenser outside. In closing, the document thanks the reader for their attention.
Refrigeration And Air Conditioning
This document provides an overview of a training session on energy equipment refrigeration and air conditioning systems. It discusses types of refrigeration including vapor compression and vapor absorption. It also covers assessing the performance of refrigeration and air conditioning systems, such as measuring tons of refrigeration and coefficient of performance. Finally, it lists several energy efficiency opportunities for refrigeration and AC systems, such as optimizing heat exchange, multi-staging systems, and capacity control of compressors.
Brain Anatomy
The human brain is divided into three main parts - the cerebrum, cerebellum, and brain stem. The cerebrum is responsible for higher functions like thinking and reasoning. It is divided into four lobes - frontal, parietal, temporal, and occipital. The cerebellum coordinates movement and balance while the brain stem regulates basic functions vital for survival like breathing. The brain is protected by meninges and ventricles circulate cerebrospinal fluid. Key structures include the limbic system for emotions and memory and the hypothalamus which regulates hormones and homeostasis.
12 Cooling Load Calculations
This document discusses cooling load, which is the thermal energy that must be removed from a space to maintain comfort conditions. It outlines various components that contribute to cooling load, including heat gains from enclosure elements, internal loads, and outdoor air. Key terms are defined, such as cooling load temperature difference (CLTD) and cooling load factor (CLF), which are used to account for time delays in radiation and conduction gains. Methods for calculating cooling loads from walls, roofs, glazing, lighting, people and other internal sources are presented.
Viewers also liked (9)
Similar to Eim mortuar yfreezer3-tf
Bench Top Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
1800 °C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. For More Information Please Logon http://goo.gl/SPzT1r
Paintbooth AutoOneIndia Call 09953353481
This document provides specifications for a paint booth, including details on its filter stages, dimensions, construction materials, electrical components, and technical parameters. The paint booth uses pre-filters, ceiling filters, and floor filters of varying materials and particle holding capacities. It has a positive pressure vertical down draft air flow of 22,000 cubic meters per hour. Components include inlet and exhaust blowers, a heat exchanger, burner, and control panel.
Miyo_2016 presentation
Miyo Technology is a manufacturer of flexible heaters that provides heating solutions to various industries. They have two production sites in Taiwan and produce over 2.5 million flexible heaters per year. Their products include polyester, polyimide, and silicone rubber heaters that can withstand temperatures up to 230°C and power densities of 8W/cm2. Miyo works closely with customers to customize heaters through design, integration of sensors, and electrical terminations.
ETA IR Oven Introduction
ETA IR oven is cost-effective Curing Oven produced by ETA, mainly to deal with the application of glue curing, special soldering,SMD testing, Anti-corrosion paint dry, radiator welding.
For More SMT Equipments Plz Contact at etasmt@foxmail.com or eta@eta-ele.com (Shanny)
WebSite: www.smt11.com
Five zones split tube furnace with 80 mm
Five Zones Split Tube Furnace is a CE certified split 80mm OD (3" I.D) Five-zone tube furnace which can achieve faster heating up to 1200oC and create smooth thermal gradient or one uniform constant temperature zone by adjust four zone temperature.
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
This document provides specifications for the IHH-ST1A/ST1D heated hose, including its construction, technical data, and performance capabilities. It has a maximum operating temperature of 100°C, uses a resistance heating cable and Pt100 sensors for temperature control, and can be customized for special applications that require variations in size, materials, pressures, or voltages. The standard versions are available in nominal diameters from 4-13 mm with power ratings up to 110W/m.
Bench Top Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
Bench top muffle furnaces are excellent for quantitative analysis and organic and inorganic ashing applications.For More Information Please Logon http://goo.gl/J1R4Yf
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
The document describes a heated hose called IHH-ST4A/ST4D for transporting liquid and gaseous media with maximum operating temperature of 400°C. It has a corrugated stainless steel inner hose, stainless steel braiding, thermal insulation of high temperature fleece and silicone foam, and a soft EPDM outer covering. Built-in Pt100 sensors allow for temperature control and the resistance heating cable provides homogeneous heat distribution. Standard versions are available in various sizes and custom designs can be specified upon request.
Eu Air Handling Unit Gb 200809
This document describes modular air handling units (AHUs) and their components. It discusses the EU size ranges from 0.2-34 m3/s and their casing, dampers, filters, coils, heat recovery, fans, and silencers. It provides details on materials, performance standards, installation, and maintenance for these various components. The purpose is to outline the technical specifications and options for modular AHUs to assist in selection and documentation.
Catalogue berjaya info made in Malaysia
Catalogue berjaya info thông tin sản phẩm berjaya malaysia
hàng chất lượng cao được nhiều khách hàng tin dùng sản phẩm xịn sò giá rẻ
Vacuum Oven - Laboratory or Process Scale
Vacuum ovens are utilized for heat treatment of items that may degrade quickly when heated in the presence of oxygen.
E68 brochure Thermal Insulating Aluminum System
The document describes the E68 window and door system which features a thermal break for improved insulation. It comes in four efficiency levels from 1.9 to 1.6 W/m2K depending on the sash and gasket configurations. The 68mm wide system uses additional insulators in the thermal break chamber and polyamide seals to provide excellent thermal insulation while maintaining an elegant straight design for medium and large openings.
Vertical Muffle Furnace (1200 °C) by ACMAS Technologies Pvt Ltd.
This document provides specifications for a 1200°C muffle furnace. It has a working temperature of 1120°C and maximum temperature of 1200°C. Temperature is controlled via a PID controller with accuracy of +/-1°C and it can be programmed with 30 segments up to 1100°C. The furnace has a 4"x4"x4" chamber made of high purity fibrous alumina with gas inlet and outlet ports. It is ideal for applications like heat treating and ignition testing that require temperatures up to 1100°C.
Testing/Manufacture/muffle furnace
This document is a catalogue listing specifications for muffle furnaces and high temperature furnaces produced by FEC, an ISO 9001 certified company. It provides details on 5 rectangular muffle furnace models ranging from 100x100x225mm to 200x200x300mm with power ratings from 1.6KW to 5KW. It also lists 5 high temperature furnace models from 100x100x225mm to 300x300x300mm. Key features highlighted are epoxy powder coated casing, temperature control up to 1150 degrees C, ceramic fiber insulation, and digital temperature controller. Contact information is provided at the end.
Testing/Manufacture/Muffle Furnace
This document is a catalogue listing specifications for muffle furnaces and high temperature furnaces produced by FEC, an ISO 9001 certified company. It provides details on 5 rectangular muffle furnace models ranging from 100x100x225mm to 200x200x300mm with power ratings from 1.6KW to 5KW. It also lists 5 high temperature furnace models from 100x100x225mm to 300x300x300mm. Key features highlighted are epoxy powder coated casing, temperature control up to 1150 degrees C, ceramic fiber insulation, and digital temperature controller. Contact information is provided at the end.
ZOHNSON LED 8FT T8 FA8 R17D with ETL DLC
36W /40W /48W /60W, 120-130lm/w.
Ballast bypass or ballast compatiable is available.
LED tube mostly use in Supermarket, School, facory etc...
We have fully testing equipment and well trained QC stafff to make sure in high quality. You can also check more details on www.zohnson-led.com.
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
The document describes a heated hose for liquid and gaseous media. It has a maximum operating temperature of 200°C. The hose consists of a smooth PTFE inner hose with stainless steel braiding and meta-aramid fiber insulation. Resistance heating cables provide even heat distribution and Pt100 sensors allow for temperature control. Special designs are available upon request to suit various performance levels and environmental conditions.
Eltherm ELW 3-FEP/PVC Heat Trace Cable - Spec Sheet
The heating cable ELW-3-FEP/PVC is suited for applications requiring long heating distances like pipe frost protection in tunnels. It consists of three resistance wires insulated by chemically-resistant FEP and protected by a PVC outer jacket. The cable is simple to install despite its solid design thanks to its longitudinal lay. It is suitable for heating circuits up to 90°C and offers advantages like long distances, simple termination, moisture protection, and easy assembly.
Larger benchtop 1750 °c muffle furnace
Larger Bench-Top 1750C Muffle Furnace is Single set point models feature digital temperature control.
2014 Black Orford catalogue
This document provides specifications and pricing for various refrigerator models from The Orford Group. It includes details on the FMB, EB, and PlanetSmart refrigerator lines, listing dimensions, capacities, features, energy usage, and retail prices (excluding GST) for each model. Contact information is also provided at the beginning and end for The Orford Group.
Similar to Eim mortuar yfreezer3-tf (20)
Bench Top Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
Bench Top Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
Bench Top Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
Bench Top Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
Vertical Muffle Furnace (1200 °C) by ACMAS Technologies Pvt Ltd.
Vertical Muffle Furnace (1200 °C) by ACMAS Technologies Pvt Ltd.
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...
Eltherm ELW 3-FEP/PVC Heat Trace Cable - Spec Sheet
Eltherm ELW 3-FEP/PVC Heat Trace Cable - Spec Sheet
Recently uploaded
Histololgy of Female Reproductive System.pptx
Dive into an in-depth exploration of the histological structure of female reproductive system with this comprehensive lecture. Presented by Dr. Ayesha Irfan, Assistant Professor of Anatomy, this presentation covers the Gross anatomy and functional histology of the female reproductive organs. Ideal for students, educators, and anyone interested in medical science, this lecture provides clear explanations, detailed diagrams, and valuable insights into female reproductive system. Enhance your knowledge and understanding of this essential aspect of human biology.
Phone Us ❤8107221448❤ #ℂall #gIRLS In Dehradun By Dehradun @ℂall @Girls Hotel...
Phone Us ❤8107221448❤ #ℂall #gIRLS In Dehradun By Dehradun @ℂall @Girls Hotel...chandankumarsmartiso
Phone Us ❤8107221448❤ #ℂall #gIRLS In Dehradun By Dehradun @ℂall @Girls Hotel With 100% Satisfaction
Cell Therapy Expansion and Challenges in Autoimmune Disease
There is increasing confidence that cell therapies will soon play a role in the treatment of autoimmune disorders, but the extent of this impact remains to be seen. Early readouts on autologous CAR-Ts in lupus are encouraging, but manufacturing and cost limitations are likely to restrict access to highly refractory patients. Allogeneic CAR-Ts have the potential to broaden access to earlier lines of treatment due to their inherent cost benefits, however they will need to demonstrate comparable or improved efficacy to established modalities.
In addition to infrastructure and capacity constraints, CAR-Ts face a very different risk-benefit dynamic in autoimmune compared to oncology, highlighting the need for tolerable therapies with low adverse event risk. CAR-NK and Treg-based therapies are also being developed in certain autoimmune disorders and may demonstrate favorable safety profiles. Several novel non-cell therapies such as bispecific antibodies, nanobodies, and RNAi drugs, may also offer future alternative competitive solutions with variable value propositions.
Widespread adoption of cell therapies will not only require strong efficacy and safety data, but also adapted pricing and access strategies. At oncology-based price points, CAR-Ts are unlikely to achieve broad market access in autoimmune disorders, with eligible patient populations that are potentially orders of magnitude greater than the number of currently addressable cancer patients. Developers have made strides towards reducing cell therapy COGS while improving manufacturing efficiency, but payors will inevitably restrict access until more sustainable pricing is achieved.
Despite these headwinds, industry leaders and investors remain confident that cell therapies are poised to address significant unmet need in patients suffering from autoimmune disorders. However, the extent of this impact on the treatment landscape remains to be seen, as the industry rapidly approaches an inflection point.
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptxHolistified Wellness
We’re talking about Vedic Meditation, a form of meditation that has been around for at least 5,000 years. Back then, the people who lived in the Indus Valley, now known as India and Pakistan, practised meditation as a fundamental part of daily life. This knowledge that has given us yoga and Ayurveda, was known as Veda, hence the name Vedic. And though there are some written records, the practice has been passed down verbally from generation to generation.Top 10 Best Ayurvedic Kidney Stone Syrups in India
we have mentioned the best 10 ayurvedic Kidney Stone Syrups. You can check all these products and choose the best one for yourself.
Efficacy of Avartana Sneha in Ayurveda
Avartana Sneha is a unique method of Preparation of Sneha Kalpana in Ayurveda, mainly it is indicated for the Vataja rogas.
Integrating Ayurveda into Parkinson’s Management: A Holistic Approach
Explore the benefits of combining Ayurveda with conventional Parkinson's treatments. Learn how a holistic approach can manage symptoms, enhance well-being, and balance body energies. Discover the steps to safely integrate Ayurvedic practices into your Parkinson’s care plan, including expert guidance on diet, herbal remedies, and lifestyle modifications.
Basavarajeeyam - Ayurvedic heritage book of Andhra pradesh
Basavarajeeyam is an important text for ayurvedic physician belonging to andhra pradehs. It is a popular compendium in various parts of our country as well as in andhra pradesh. The content of the text was presented in sanskrit and telugu language (Bilingual). One of the most famous book in ayurvedic pharmaceutics and therapeutics. This book contains 25 chapters called as prakaranas. Many rasaoushadis were explained, pioneer of dhatu druti, nadi pareeksha, mutra pareeksha etc. Belongs to the period of 15-16 century. New diseases like upadamsha, phiranga rogas are explained.
How STIs Influence the Development of Pelvic Inflammatory Disease.pptx
STIs may cause PID. For the both disease, herbal medicine Fuyan Pill can be a solution.
The Best Ayurvedic Antacid Tablets in India
Treat the symptoms of indigestion, heartburn and stomach reflux with the 10 Best Ayurvedic Antacid Tablets in India.
share - Lions, tigers, AI and health misinformation, oh my!.pptx
• Pitfalls and pivots needed to use AI effectively in public health
• Evidence-based strategies to address health misinformation effectively
• Building trust with communities online and offline
• Equipping health professionals to address questions, concerns and health misinformation
• Assessing risk and mitigating harm from adverse health narratives in communities, health workforce and health system
Role of Mukta Pishti in the Management of Hyperthyroidism
Muktapishti is a traditional Ayurvedic preparation made from Shoditha Mukta (Purified Pearl), is believed to help regulate thyroid function and reduce symptoms of hyperthyroidism due to its cooling and balancing properties. Clinical evidence on its efficacy remains limited, necessitating further research to validate its therapeutic benefits.
Recently uploaded (20)
Phone Us ❤8107221448❤ #ℂall #gIRLS In Dehradun By Dehradun @ℂall @Girls Hotel...
Phone Us ❤8107221448❤ #ℂall #gIRLS In Dehradun By Dehradun @ℂall @Girls Hotel...
Cell Therapy Expansion and Challenges in Autoimmune Disease
Cell Therapy Expansion and Challenges in Autoimmune Disease
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptx
Muscles of Mastication by Dr. Rabia Inam Gandapore.pptx
Muscles of Mastication by Dr. Rabia Inam Gandapore.pptx
Top 10 Best Ayurvedic Kidney Stone Syrups in India
Top 10 Best Ayurvedic Kidney Stone Syrups in India
Tests for analysis of different pharmaceutical.pptx
Tests for analysis of different pharmaceutical.pptx
Integrating Ayurveda into Parkinson’s Management: A Holistic Approach
Integrating Ayurveda into Parkinson’s Management: A Holistic Approach
Basavarajeeyam - Ayurvedic heritage book of Andhra pradesh
Basavarajeeyam - Ayurvedic heritage book of Andhra pradesh
How STIs Influence the Development of Pelvic Inflammatory Disease.pptx
How STIs Influence the Development of Pelvic Inflammatory Disease.pptx
Ear and its clinical correlations By Dr. Rabia Inam Gandapore.pptx
Ear and its clinical correlations By Dr. Rabia Inam Gandapore.pptx
share - Lions, tigers, AI and health misinformation, oh my!.pptx
share - Lions, tigers, AI and health misinformation, oh my!.pptx
Role of Mukta Pishti in the Management of Hyperthyroidism
Role of Mukta Pishti in the Management of Hyperthyroidism
Vestibulocochlear Nerve by Dr. Rabia Inam Gandapore.pptx
Vestibulocochlear Nerve by Dr. Rabia Inam Gandapore.pptx
CHEMOTHERAPY_RDP_CHAPTER 6_Anti Malarial Drugs.pdf
CHEMOTHERAPY_RDP_CHAPTER 6_Anti Malarial Drugs.pdf
Eim mortuar yfreezer3-tf
- 1. Mortuary Freezer MFZ 3TF -25 C SPECIFICATION Country of Original Malaysia ISO/IEC 17025 Certified Brand EiM Model MFZ-3TF Mortuary Freezer Dimension Int 2270mm L x 860mm W x 1800mm H Dimension Ext 2500mm L x 1070mm W x 2590mm H Int & Ext Chamber Stainless Steel 304 (1.5mm Thick ext) (0.9mm Int) Door Diam 580mm x 860mm Stainless Steel Tray 610mm x 2100mm Temp Range 0C to -25C Temp Controller Digital Microprocessor Door Stainless steel swing out Panel Structure Wall Floor Ceiling Internal Cooling System Evaporator Force Fan Panel Insulation High Pressure Injected Rigid Polyurethane Fire Resistance Class Comply to Standard M2 Normal NFP 92-507 Density 40kg/cu M 5% Corner and Joint Fully Stainless Steel Finish Fully Stainless Steel Door Lock Semi recessed Single Pivoting Air Tight Gasket Yes Locking Mechanism Lock with key Refrigerant Capacity 1 hp Refrigeration system Voltage 230Vac 1 Phase 50Hz Refrigerant R404a CFC Free Ambient Temperature +35C Condesing Unit Installed at Top (888mm L x 813mm W x 330mm H) Lighting 1 Unit ea chamber Drainage Hot Pipe Evaporation Defrost System Auto Remote Alarm Contact Dry Contact Control Panel Functions on off switch Indicator Light for ON OFF 3 Set Door Flame With Heater Light Switch 3 Pieces Display Digital Alarm Hi and Low Alarm Voltage Regulator Auto Voltage Regulator 3 Kva option Authorised Distributor : MoDIEZHAM SDN BHD No. 1B, Tingkat 1, Jalan 6/4, Taman Komersial Pandan Indah, 55100 Kuala Lumpur. Tel : 03 - 4280 2505 / Fax : 03 - 4280 3505 Email : info@modiezham.com/ sales@modiezham.com