eDRG is a powerful reporting and dashboarding tool that integrates with the EMC Documentum platform. It allows users to create customizable reports and dashboards in an interactive format. Reports can be generated on demand, scheduled, or event-based. eDRG features include powerful querying, trend analysis, integration with Documentum security and objects, and output in multiple formats. It provides a unified dashboard interface and customizable reports to improve users' decision making and management abilities.
Fluid and heat flows and transmit in a wide variety of products from valves, medical device with blood flow, electronic components and much more. For these products submitted to gas or liquid flow, the understanding of this flow and the often the transferred heat is crucial for a proper product dimensioning and an accurate answer to the technical requests.
But, historically, Computational Fluid Dynamics Simulation has only been used by very few product engineers, mainly by CFD specialist for product validation only.
The objective of this presentation is to present a unique CFD engineering tool, SOLIDWORKS Flow Simulation, made by engineers for Product Engineers. Discover today why SOLIDWORKS Flow Simulation is the unique SOLIDWORKS embedded CFD simulation tool which enable all SOLIDWORKSuser to get the technical insight they need while designing their products and not only at the end of the Product Development cycle.
The Module for Pipe Class and Catalogue Management
Independent module for development and management of pipe classes, creation of parameterized 3D components, preparation and integration of manufacturer catalogues, import and export of data plus examination of existing catalogue data to ensure up-to-dateness.
CFD (Computational Fluid Dynamic) Analysis offers unique engineering insight when developing products.
Intuitive CFD software, SOLIDWORKS Flow Simulation, bring a new approach of concurrent engineering so all Product Engineers can implement CFD analysis during their product development cycle.
The Module for Project Manager and Repair & Maintenance Staff
CADISON® Project Navigator is the module for viewing of project data within the corporate network. Navigator has been designed for staff members normally not involved in the active planning of a plant but afterwards responsible for operation and maintenance of the plant (i.e. mere data consumers).
Since in a CADISON® project all logic and functional interrelations are displayed, it is possible, e.g. in case a pump fails operation, to make visible all plant components affected by this failure. In case problems occur, all components, safety zones, pipe runs, hazardous areas etc. that might be affected are recognized and/or displayed.
2015년 11월 17일에 코엑스에서 개최된 "대내외 협업 혁신을 위한 2015년 다쏘시스템 건설산업 세미나"에서 소개된 발표자료입니다. "글로벌 건설산업 최신 동향 및 선진 BIM 전략에 대해" Marty Doscher (다쏘시스템 건설산업 총괄 부사장)이 발표한 자료입니다.
Fluid and heat flows and transmit in a wide variety of products from valves, medical device with blood flow, electronic components and much more. For these products submitted to gas or liquid flow, the understanding of this flow and the often the transferred heat is crucial for a proper product dimensioning and an accurate answer to the technical requests.
But, historically, Computational Fluid Dynamics Simulation has only been used by very few product engineers, mainly by CFD specialist for product validation only.
The objective of this presentation is to present a unique CFD engineering tool, SOLIDWORKS Flow Simulation, made by engineers for Product Engineers. Discover today why SOLIDWORKS Flow Simulation is the unique SOLIDWORKS embedded CFD simulation tool which enable all SOLIDWORKSuser to get the technical insight they need while designing their products and not only at the end of the Product Development cycle.
The Module for Pipe Class and Catalogue Management
Independent module for development and management of pipe classes, creation of parameterized 3D components, preparation and integration of manufacturer catalogues, import and export of data plus examination of existing catalogue data to ensure up-to-dateness.
CFD (Computational Fluid Dynamic) Analysis offers unique engineering insight when developing products.
Intuitive CFD software, SOLIDWORKS Flow Simulation, bring a new approach of concurrent engineering so all Product Engineers can implement CFD analysis during their product development cycle.
The Module for Project Manager and Repair & Maintenance Staff
CADISON® Project Navigator is the module for viewing of project data within the corporate network. Navigator has been designed for staff members normally not involved in the active planning of a plant but afterwards responsible for operation and maintenance of the plant (i.e. mere data consumers).
Since in a CADISON® project all logic and functional interrelations are displayed, it is possible, e.g. in case a pump fails operation, to make visible all plant components affected by this failure. In case problems occur, all components, safety zones, pipe runs, hazardous areas etc. that might be affected are recognized and/or displayed.
2015년 11월 17일에 코엑스에서 개최된 "대내외 협업 혁신을 위한 2015년 다쏘시스템 건설산업 세미나"에서 소개된 발표자료입니다. "글로벌 건설산업 최신 동향 및 선진 BIM 전략에 대해" Marty Doscher (다쏘시스템 건설산업 총괄 부사장)이 발표한 자료입니다.
CADISON® Project Engineer is your tool for plant design, Engineering calculations and detailing of your plant by adding all required components (objects) to the project while taking them from the catalogue. Simple Drag & Drop operations are sufficient with completely text based operations without the obligation to have a graphical environment. This approach is called "Conceptual Engineering". The target of CADISON® Project Engineer is to provide the user with data for calculation without large efforts and already at a very early time.
The CADISON® P&ID Designer plays a decisive role in design, construction, commissioning and maintenance and has an enormous effect on the complete lifecycle of a plant. In this case the preliminary project engineering will be integrated with Basic and Detail Engineering and 2D layout planning. Apart from the P&I diagrams the P&ID Designer even creates block flow charts and process flow diagrams (PFD).
Preparation of planning documents for instrumentation, power plants and control but also installation and process measuring and control technology are in the competence of the electric design engineer. The common data base permits at any time the access to information about all trades involved in the project such that planning of electrical engineering can be combined with planning of process engineering.
The Module for 3D Layout and Piping Planning
Installation and pipeline planning in the 3D model are in the competence of the 3D Designer. Normally this module is used for access to data from Basic Engineering or P&ID. Efficient assistants are available for installation planning: For instance, isometrics can be automatically generated from the planned pipeline systems.
Start with an empty sheet of paper, access an existing 3D Design model - even an AutoCAD model - or access data from Basic Engineering or P&ID! You can simply take your data - either graphic data or data from plant structure – through Drag & Drop and insert them in your 3D design environment for further processing as required.
B Kindilien Finding Efficiency In Mach 120408jgIpotiwon
Presentation at the 2008 Defense Manufacturer\'s Conference (DMC), Orlando, FL: The advent of finite-element modeling based systems has ushered in an era of physics-based prediction of machining operations, giving engineers new insight into designing machining strategies. Some technologies are being employed as machining process development tools. Others are being applied by companies following the tool path generation process in the computer-aided manufacturing (CAM) software systems. Further, other software technologies are evolving within the CAM software systems users currently operate, offering dramatic reductions in machining cycle times by affecting air cuts and feed rates. But users still wonder how to apply these various approaches; they puzzle over what approaches work for their shop practices. Attendees described after this presentation that they had a clearer sense of how strategic changes in machining approaches and implementation of the right technology for a given manufacturing condition can make all the difference.
Rising Stars - Presentation by Thierry Petit, Co-Founder & CEO of Showroomprive at the NOAH 2012 Conference in London, Old Billingsgate on the 7th of November 2012.
A summary of the famous tale by Lewis Carroll, dedicated to resident doctors and young researchers. Carroll was a mathematician; in my opinion, the book is NOT a non-sense but a highly scientific sense. The history is summarized in Catalan and the most significant (for purpose) parts are copied and pasted. The most relevant sentences are highlighted in red. This is an introduction to the course of clinical reasoning
When it comes to Building
Successful Brands, we cover
the full process – from the
Brand Strategy, through
Brand Design and Brand
Integrated Communications.
CADISON® Project Engineer is your tool for plant design, Engineering calculations and detailing of your plant by adding all required components (objects) to the project while taking them from the catalogue. Simple Drag & Drop operations are sufficient with completely text based operations without the obligation to have a graphical environment. This approach is called "Conceptual Engineering". The target of CADISON® Project Engineer is to provide the user with data for calculation without large efforts and already at a very early time.
The CADISON® P&ID Designer plays a decisive role in design, construction, commissioning and maintenance and has an enormous effect on the complete lifecycle of a plant. In this case the preliminary project engineering will be integrated with Basic and Detail Engineering and 2D layout planning. Apart from the P&I diagrams the P&ID Designer even creates block flow charts and process flow diagrams (PFD).
Preparation of planning documents for instrumentation, power plants and control but also installation and process measuring and control technology are in the competence of the electric design engineer. The common data base permits at any time the access to information about all trades involved in the project such that planning of electrical engineering can be combined with planning of process engineering.
The Module for 3D Layout and Piping Planning
Installation and pipeline planning in the 3D model are in the competence of the 3D Designer. Normally this module is used for access to data from Basic Engineering or P&ID. Efficient assistants are available for installation planning: For instance, isometrics can be automatically generated from the planned pipeline systems.
Start with an empty sheet of paper, access an existing 3D Design model - even an AutoCAD model - or access data from Basic Engineering or P&ID! You can simply take your data - either graphic data or data from plant structure – through Drag & Drop and insert them in your 3D design environment for further processing as required.
B Kindilien Finding Efficiency In Mach 120408jgIpotiwon
Presentation at the 2008 Defense Manufacturer\'s Conference (DMC), Orlando, FL: The advent of finite-element modeling based systems has ushered in an era of physics-based prediction of machining operations, giving engineers new insight into designing machining strategies. Some technologies are being employed as machining process development tools. Others are being applied by companies following the tool path generation process in the computer-aided manufacturing (CAM) software systems. Further, other software technologies are evolving within the CAM software systems users currently operate, offering dramatic reductions in machining cycle times by affecting air cuts and feed rates. But users still wonder how to apply these various approaches; they puzzle over what approaches work for their shop practices. Attendees described after this presentation that they had a clearer sense of how strategic changes in machining approaches and implementation of the right technology for a given manufacturing condition can make all the difference.
Rising Stars - Presentation by Thierry Petit, Co-Founder & CEO of Showroomprive at the NOAH 2012 Conference in London, Old Billingsgate on the 7th of November 2012.
A summary of the famous tale by Lewis Carroll, dedicated to resident doctors and young researchers. Carroll was a mathematician; in my opinion, the book is NOT a non-sense but a highly scientific sense. The history is summarized in Catalan and the most significant (for purpose) parts are copied and pasted. The most relevant sentences are highlighted in red. This is an introduction to the course of clinical reasoning
When it comes to Building
Successful Brands, we cover
the full process – from the
Brand Strategy, through
Brand Design and Brand
Integrated Communications.
Changing the way you use diet supplements or using regularly anything that improves your quality of life is very useful and doesn't have to be expensive. Know about countries that pays you to stay healthy ? Yes , it does. Chang healthy food habits and try out what works for u to remain healthy. Nature changes and so are you . In time you know your own basic guideline to remain healthy because doctors doesn't know it all after all ... .
Plenary talk by Ori Gerstel at ACP13 on IP-optical collaborationOri Gerstel
* What are the challenges in core optical networks today?
* The key role of multi-layer interworking in addressing these challenges
* How will multi-layer SDN help and how it relates to the control plane?
Bio mechanics of Space closure in orthodontics /certified fixed orthodontic c...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Using structured approach and an SAP Sybase PowerDesigner Extension our product permit faster development, better interaction with stakeholders and sustain Information knowledge and enterprises processes. Our product will build all models using in a BI project including optimization and full information linage and traceability:
- Database
- extraction
- staging
- final model (ERD or Multi-Dimensional [MD]),
- Data movement model
- Orchestration model
“Context Aware” Document Generation tools for enterprise level, on demand generation and distribution of smart forms, letters or documents of any variety.
Enterprise Monitoring and Auditing in DenodoDenodo
Watch full webinar here: https://buff.ly/3P3l4oK
Proper monitoring of an enterprise system is critical to understanding its capacity and growth, anticipating potential issues, and even understanding key ROI metrics. This also facilitates the implementation of policies and user access audits which are key to optimizing the resource utilization in an organization. Do you want to learn more about the new Denodo features for monitoring, auditing, and visualizing enterprise monitoring data?
Join us for the session with Vijayalakshmi Mani, Data Engineer at Denodo, to understand how the new features and components help in monitoring your Denodo Servers and the resource utilizations and how to extract the most out of the logs that the Denodo Platform generates including FinOps information.
Watch on-demand and Learn:
- What is a Denodo Monitor and what’s new in it?
- How to visualize the Denodo Monitor Information and use of Diagnostics & Monitoring Tool
- Introduction to the new Denodo Dashboard
- Demonstration on the Denodo Dashboard
Build and Run Business Applications with K2 - Forms, Workflow and Data.
K2 blackpearl allows people to build and run business applications, including forms, workflow, data and reports. Across enterprises and within departments, K2 customers are rapidly transforming their companies with applications that allocate work to the right people, with all the information they need to make great decisions.
Learn more about SCADA expert ClearSCADA:
- Simplicity & Enhanced User Experience for faster deployment and improved time-to-market
- Reduced Maintenance Efforts for protection of investment
- Enhanced Security capability for better protection of the system
- Enhanced Operational Intelligence to help optimize operations and maintenance activities
- Integrated with the complete Schneider Electric Telemetry portfolio
Multiple awr report parser and analyzer; the idea came to me while running an audit to identify bottlenecks in an Oracle infrastructure composed of two servers with many single instances. Due to lack of available time to do the work, I decided to develop a small utility which would help me to get a quick full picture of the infrastructure load. The customer was not using OEM and nothing was available to consolidate system load. Following positive impact and customer impression, it facilitate the introduction of our in-house tool capman to collect and centralize such interesting key indicators.
D3 data driven development in practice - the AirPortal for Schiphol and Tra...112Motion
This document familiarizes business & IT people with D3 - Data Driven Development - an evolutionary process for developing and maintaining (complex) IT systems. D3 applies to the design, development, deployment and testing of (complex) IT systems.
D3 is in many ways a superior development paradigm as it (1) applies a "data first" approach to describe specifications; the same specs are used for testing and it is (2) supported by Testimony and Harmony. Harmony and Testimony provide both the platform & tooling to develop, run and maintain complex IT. It's an open solution; relying on Google Apps & DOCS.
Note (sept 2015) : the AirPortal case covers "bookings" - a relative simple to define system. We'll address more complex systems in the near future.
Real-time Manufacturing Management for a Hybrid Processmichaelthonea
One of my successful projects while at GAP, which was showcased at Wonderware’s Op Manage conference. My role was system project and played a major role in all development and design.
Our satisfied customers reveal with their successes that even you can reach 30% efficiency improvement in your company through the use of CADISON®.
As one of our first customers the company VPT Kompressoren (Story) has the Citrix solution in use. Thus not only work from the home office gets possible but also the simple and cost-efficient integration of external service providers. This method opens totally new chances to overcome short-term staffing shortages without disclosing the company’s data and know-how.
Similar to eDRG Innovative Reporting & Dashboarding - Business Values (20)
TOP 10 B TECH COLLEGES IN JAIPUR 2024.pptxnikitacareer3
Looking for the best engineering colleges in Jaipur for 2024?
Check out our list of the top 10 B.Tech colleges to help you make the right choice for your future career!
1) MNIT
2) MANIPAL UNIV
3) LNMIIT
4) NIMS UNIV
5) JECRC
6) VIVEKANANDA GLOBAL UNIV
7) BIT JAIPUR
8) APEX UNIV
9) AMITY UNIV.
10) JNU
TO KNOW MORE ABOUT COLLEGES, FEES AND PLACEMENT, WATCH THE FULL VIDEO GIVEN BELOW ON "TOP 10 B TECH COLLEGES IN JAIPUR"
https://www.youtube.com/watch?v=vSNje0MBh7g
VISIT CAREER MANTRA PORTAL TO KNOW MORE ABOUT COLLEGES/UNIVERSITITES in Jaipur:
https://careermantra.net/colleges/3378/Jaipur/b-tech
Get all the information you need to plan your next steps in your medical career with Career Mantra!
https://careermantra.net/
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
eDRG Innovative Reporting & Dashboarding - Business Values
1. euroscript Netherlands eDRG – slide 1
euroscript Netherlands
Delivering meaningful insight across your organizationeuroscript Netherlands
eDRG - Business Values
Innovative & Interactive Dashboarding & Reporting in D2
2. euroscript Netherlands eDRG – slide 2
Innovative & Interactive Dashboarding in D2
eDRG is a powerful, EMC certified, and fully-integrated
Documentum add-on that provides tailor made
interactive reports and dashboards
3. euroscript Netherlands eDRG – slide 3
eDRG solution overview
eDRG
Report
Generator
Information and
overview
Documentum users
Controlled output in multiple formats
User request
Time
scheduled
non-Documentum
users
Event based
4. euroscript Netherlands eDRG – slide 4
eDRG unique features
Powerful DQL implementation
– Without the need of extensive training
History and trend analysis
– Using the past to predict the future
Repeating variables
– Multiple values for one variable
Integration with DCTM architecture
– eDRG uses DCTM security model
– Reports are DCTM objects
– Infrastructure reuse
6. euroscript Netherlands eDRG – slide 6
eDRG for trend analysis
The reduction in dossiers overdue might be
caused by an increase in unassigned dossiers!
Configure trend information reports in minutes!
7. euroscript Netherlands eDRG – slide 7
eDRG for KPI Monitoring
Employees can see which KPI is at risk
and decide which task to start next
Improve the self-management ability of your employees
8. euroscript Netherlands eDRG – slide 8
Customer Service Centre dashboard
eDRG for employee empowerment
No extra agent needs to be assigned to queue 1 even
though it has the longest waiting time.
Strong dashboard improve
self-management capacity
9. euroscript Netherlands eDRG – slide 9
eDRG to optimize UI: Combine multiple D2 widgets in one
Employees need to review
1000s of scan-batches a day.
The many required D2
widgets and related actions
would decrease employee
performance dramatically.
Performance is largely
improved, as all information is
provided
in one interactive dashboard.
Reduce the number of
mouse-clicks
from 12 to 1 !
10. euroscript Netherlands eDRG – slide 10
eDRG to optimize UI - Example: review scan batch screen
Approval of the scan-batch automatically
acquires the next tasks,
resulting in one-click approval
11. euroscript Netherlands eDRG – slide 11
eDRG for Check & Review
An employee validates the automatically assigned metadata of a scan-process.
The Excel report also contains information important for the
developer for issue resolution (e.g. ObjectId’s)
12. euroscript Netherlands eDRG – slide 12
eDRG as your personal assistant
By clicking the case name
you open the dossier
Reminders
New documents (status = to be processed)
Secondary case handler
Primary case handler
Employees have a complete overview of and access to their personal work
13. euroscript Netherlands eDRG – slide 13
eDRG for agenda planning
The agenda for a central committee meeting is generated based
on ‘Final Decision Date’.
Documents are directly accessible electronically
Reduce meeting preparation time and make meeting documentation electronically available
DossierType DossierID Subject Final Decision date Phase
MLAV1 139339
X
13-1-2014 IV
MLAV1 139411 17-1-2014 IV
MLAV1 139424 21-1-2014 IV
MLDD3 12708 12-1-2014 III
MLDD3 12709 15-1-2014 III
MLDD3 12814 21-1-2014 III
MLDD3 12816 22-2-2014 II
14. euroscript Netherlands eDRG – slide 14
eDRG to use D2 on iPad
Essential functionality in D2 is hidden under the right-mouse click.
An iPad has no right-mouse click.
eDRG to make D2 functionally available for iPad
No context menus.
All actions through direct links
for easier access on iPad.
15. euroscript Netherlands eDRG – slide 15
eDRG to generate formal documents
Reports are managed like other documents and deliver
proof of correct execution of a business process
Automatically generate formal documents
16. euroscript Netherlands eDRG – slide 16
eDRG as alternative for Business Process implementation
Ensure that business processes and rules are followed.
People are informed of required actions, through
dashboard reports or email.
SOP's not yet read Date: 20-Apr-2014
SOP Nr Description Active Date Not Yet Read
PR_2014_000529 Change to Startup Procedure Machine x317 15-Apr-2014 R.Russel
PR_2013_001391 Clothing Instruction 20-Apr-2014 P.Patterson
PR_2014_000632 Cleaning Method Machine x421 1-May-2014
A. Johnson
W. DeWit
J.McLaren
PR_2014_000312 Startup Procedure Macine x421 1-May-2014 J.McLaren
PR_2014_000993 CloseDown Procedure Machine x421 1-May-2014
B. Stephens
R. Russel
SOP to be read User: R.Russel
SOP Nr Description Active Date Not Yet reviewed by
PR_2014_000529 Change to Startup Procedure Machine x317 15-Apr-2014 R.Russel
PR_2014_000993 CloseDown Procedure Machine x421 1-May-2014 R. Russel
Implement
business process assurance
within hours
17. euroscript Netherlands eDRG – slide 18
eDRG for Documentum support team
Always have access to your current
Documentum configuration
“Can you please create me a list of … ?”
...
“Nice! Can you provide this every week/month
in Excel/PDF and send it to me by email?”
18. euroscript Netherlands eDRG – slide 19
eDRG for Testing
Example:
A tester must validate the automatically assigned metadata of a scan-process.
A report shows all To-Be-Checked information of the test case.
HTML to review the test case.
Excel to register remarks “in context”. It also contains data
to assist the developer in issue resolution (e.g. ObjectId’s)
Customer Case: 500+ test cases
Individual test case: 30 min 2,5 min
Total test period: 7 weeks 3 days
19. euroscript Netherlands eDRG – slide 20
eDRG - Reporting as part of your workflow
Workflow process Workflow process
continued
Example:
During the price-setting process
regarding a new order, a report with
customer history is attached.
The account manager can calculate
the discount on this information.
Support your
employees
in decision making
20. euroscript Netherlands eDRG – slide 21
eDRG integration with Reveille
performance
management & monitoring
Enhance log and server
information stored in
Reveille with
Documentum
metadata to create
more valuable reports
A possible alternative
for audit trails with
easier/faster access
and allowing to
combine metadata with
server information
21. euroscript Netherlands eDRG – slide 22
eDRG for multi-dimensional access to your content
= Price Level
Allow your users multi-dimensional
access to information.
Access standard Documentum
functionality for content management
Provide a custom User
Interface in D2 avoiding PlugIns
22. euroscript Netherlands eDRG – slide 23
eDRG Product Overview
FUNCTIONAL SPECIFICATIONS eDRG EMC DRS EMC
BAM
SQL
Reportin
g
Services
SAP
Crystal
Reports
Configurable reports & dashboards √ √
Integrated within Documentum D2 √
Integrated within xCP TaskSpace √ √
Integrated within WDK web
applications
√ √
Variety of output formats √ √ √
Reports upon user request √ √ √
Scheduled reports √ √ √ √
History/trend reports √ √
Complex reports with multiple DQL’s √ √ √ √
The ECM market demands reporting and dashboarding functionality that goes
beyond the current standard capabilities of EMC Documentum
23. euroscript Netherlands eDRG – slide 24
eDRG Product Overview
TECHNICAL SPECIFICATIONS eDRG EMC DRS EMC
BAM
SQL
Reportin
g
Services
SAP
Crystal
Reports
No extra hardware needed √ √ √ √
No third party software required √ √ √ √
No customization needed √ √ √
Single installer √ √ √
Installer without manual steps √
Use of variables in reports √ √
Pre-filled variables based on user √ √
Seperate designer tool √ √ √
Query builder tool √ √ √
Security enforced √ √ √
eDRG meets the needs where current existing Documentum reporting tools are
lacking, filling the product gap relative to customer needs
24. euroscript Netherlands eDRG – slide 25
Main new functionality in eDRG 4.2
Extended report presentations
– Office 2010 / 2013 output format
– Open Documents format
– Improved intelligent graphical presentations
– Inherit layout from central stylesheet (also for PDF)
Documentation of all included reports and presentations
Report configuration export/import
User can save selected Report Variables
Hidden Report Variables (to set defaults, but not visible for end-users)
Generate and send a report to all users in a list
25. euroscript Netherlands eDRG – slide 26
eDRG. Delivering meaningful insight across your
organization.
Discover the eDRG for free for 30 days!
Go to our website and download the
full software and trial license:
http://www.euroscript.com/eDRG
Contact: eDRG@euroscript.com