The document summarizes a presentation on the Indian steel industry. It discusses the evolution and structure of the industry, production functions, economies of scale, growth prospects, concentration curves, demand curves, and SWOT analysis. Key points include that the industry is oligopolistic with the top 4 firms controlling around 78% market share. The industry faces threats from cheap imports but has opportunities from growing infrastructure demand. Recommendations focus on increasing R&D, technology forecasting, improving resource use, and investing in infrastructure.
This reports gives reader an overview of India steel industry. It will explain India position from world prospective, its working and dominant players.
This reports gives reader an overview of India steel industry. It will explain India position from world prospective, its working and dominant players.
India has become the world’s fourth-largest producer of crude steel. The country is slated to become the second-largest steel producer by 2015 as large public and private sector players strengthen steel production capacity in view of the rising demand.
The total market value of the steel sector in India stood at US$ 57.8 billion in 2011 and is expected to touch US$ 95.3 billion by 2016. Total crude and finished steel production grew at a compound annual growth rate (CAGR) of 6.6 per cent and 4.2 per cent over FY08-11 to reach 69.6 million tonnes (MT) and 66 MT respectively.
Steel consumption is expected to grow at an average rate of 6.8 per cent to reach 104 MT by 2017 driven by rising infrastructure development and growing demand for automotives. The infrastructure sector is India’s largest steel consumer, accounting for 63 per cent of total consumption in FY11. Attracted by the growth potential of the Indian steel industry, several global steel players have been planning to enter the market. The Government of India (GOI) has allowed 100 per cent foreign direct investment (FDI) in the sector through automatic route in order to attract foreign investments.
about the steel industry,Product of the industry, PEST analysis, Porter's five forces, Market Share, Future of the industry, Growth of the industry, Nation steel policy.
India is the second largest producer and consumer of steel next to China. The steel industry contributes around 2% of the GDP and employs 500,000 people directly and 2.5 million indirectly.
Steel is fundamental to the growth of a country. So, let us talk about this industry.
Iron and Steel Industry in India ( Seminar Presentation)DineshKumar4749
This file is all about understanding about Iron and Steel Industry in India. This file can directly be used for seminar presentations about India and the steel industry in India.
India has become the world’s fourth-largest producer of crude steel. The country is slated to become the second-largest steel producer by 2015 as large public and private sector players strengthen steel production capacity in view of the rising demand.
The total market value of the steel sector in India stood at US$ 57.8 billion in 2011 and is expected to touch US$ 95.3 billion by 2016. Total crude and finished steel production grew at a compound annual growth rate (CAGR) of 6.6 per cent and 4.2 per cent over FY08-11 to reach 69.6 million tonnes (MT) and 66 MT respectively.
Steel consumption is expected to grow at an average rate of 6.8 per cent to reach 104 MT by 2017 driven by rising infrastructure development and growing demand for automotives. The infrastructure sector is India’s largest steel consumer, accounting for 63 per cent of total consumption in FY11. Attracted by the growth potential of the Indian steel industry, several global steel players have been planning to enter the market. The Government of India (GOI) has allowed 100 per cent foreign direct investment (FDI) in the sector through automatic route in order to attract foreign investments.
about the steel industry,Product of the industry, PEST analysis, Porter's five forces, Market Share, Future of the industry, Growth of the industry, Nation steel policy.
India is the second largest producer and consumer of steel next to China. The steel industry contributes around 2% of the GDP and employs 500,000 people directly and 2.5 million indirectly.
Steel is fundamental to the growth of a country. So, let us talk about this industry.
Iron and Steel Industry in India ( Seminar Presentation)DineshKumar4749
This file is all about understanding about Iron and Steel Industry in India. This file can directly be used for seminar presentations about India and the steel industry in India.
FERROALLOYS : POWERLESS IN INDIA? Presentation on Power Crisis & Ferroalloy ...PRABHASH GOKARN
Indian Power Shortage is Achilles Heel of the Ferroalloy Industry. Power Shortages are due to lower generation, Non - Availability of Thermal Coal results in further shortage. The Electric Transmission Grid is Collapsing and rising prices of fossile fuels leads to inevitable rise in power cost : will ferroalloy industry remain profitable ?
Nuclear Power in India remains Controversial.
India to see 6.7% shortage this fiscal
•In 2012-13, the energy shortfall touched 8.7 per cent while peak shortage reached 9 per cent.
•Overall, energy shortfall is expected to be 70,232 million units, resulting in a deficit of 6.7 per cent this fiscal.
•The requirement would be 10,48,533 million units whereas the availability is pegged at 9,78,301 million units.
•Transmission constraints between Northern-North Eastern-Eastern-Western - Southern Regional Grid restricts flow of power.
•The strains on India’s electricity network brutally exposed last summer when the grid collapsed for the best part of two days across north India - the world’s biggest power cut.
Thermal Coal supply by Coal India severely restricted – mines not expanded in time to take care of explosion in demand from the power sector.
•Overpricing of coal & poor coal quality of coal supplied by Coal India
•Mine stoppages due to flooding etc lead to severe seasonal shortages.
•Imported coal from Indonesia – rising coat and decreased availability. Restrictions on foreign ownership of coal mines & export of thermal coal – how long will the party last?
•60% of power generated in India comes from burning coal. Isn’t over dependence on thermal coal for power a dangerous situation?
•Many delayed projects due to lack of coal ….
Despite abundant reserves of coal, India faces a severe shortage of coal - India isn't producing enough to feed its power plants.
•Coal India, is constrained by primitive mining techniques and is rife with theft and corruption; Coal India has consistently missed production targets and growth targets.
•Poor coal transport infrastructure has worsened these problems.
•Most of India's coal lies under protected forests or designated tribal lands. Any mining activity or land acquisition for infrastructure in these coal-rich areas of India, has been rife with political demonstrations, social activism and public interest litigation.
Presentation ends with Ways out of the Crisis.
Steel Making and Rolling (Metalworking): Process & Applications, Rod and Bar...Ajjay Kumar Gupta
The steel industry has taken note of the continued growth in steel imports and a number of projects have been planned and are under implementation.In rolling mills, intermediate steel products are given their final shape and dimension in a series of shaping and finishing operations. Rolling of steel is one of the most important manufacturing processes for steel. It is usually the first step in the processing of steel after it is made and cast either in Ingot or continuous cast product in a steel melting shop.
See more
http://goo.gl/lUUh86
http://goo.gl/fSIHG7
http://goo.gl/4os7IE
http://www.entrepreneurindia.co/
Tags
Business guidance for steel rolling industry, Business Plan for a Startup Business, Business plan for steel rolling mill, Business start-up, Fusion welding processes, Great Opportunity for Startup, Hot rolled steel properties, Hot rolling mill process, Hot Rolling Mill, Hot Rolling mill, Hot Strip Mill, How is Steel Produced, How to Start a Steel Production Business, How to start a successful steel rolling business, How to start steel mill industry, How to Start Steel rolling Industry in India, How to start steel rolling mill, Indian Steel Industry, Industrial steel rolling mill, Modern steel making technology, Most Profitable Steel Business Ideas, New small scale ideas in Steel rolling industry, Opportunity Steel Rolling Mill, Plate Mill, Process & Applications, Process of steelmaking, Profitable small and cottage scale industries, Progress and Prospect of Rolling Technology, Project for startups, Rod and Bar Rolling, Rod and bar rolling, Rolling Metalworking, Rolling Mill for Steel Bars, Rolling process, Setting up and opening your steel rolling Business, Small scale Commercial steel rolling business, Small Scale Steel rolling Projects, Small Start-up Business Project, Start a Rolling Mill Industry, Start steel rolling mill in India, Starting a Steel Business, Starting a Steel rolling Business, Starting Steel Mini Mill, Start-up Business Plan for steel rolling, Startup Project for steel rolling business, Steel and hot rolling Business, Steel Based Profitable Projects, Steel Based Small Scale Industries Projects, Steel business plan, Steel hot rolling process, Steel Industry in India, Steel making and rolling, Steel making Projects, Steel making technology, Steel Making, Steel manufacturing process, Steel mill process, Steel mill, Steel production process, Steel rerolling mill feasibility start up, Steel rolling Industry in India, Steel rolling machine factory, Steel rolling mill industry demand, Steel rolling mill industry overview, Steel rolling mill industry, Steel rolling mill market forecast, Steel rolling mill market growth, Steel rolling mill market, Steel rolling mill size, Steel rolling mill starts production, Steel rolling mill, Steel Rolling Technology, Steelmaking, Steelmaking Processes, Types of rolling mills
Challenges & future scenario of steel industry 1GS Dhir
Power point copy of Presentation made by me on "Challenges & Future Scenario of Steel "Industry in Reliance General Insurance (RGICL's) National Conference on "Latest Trends & Practices in Steel Sector" held at Mumbai on 17-18 Jan 2014
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
2. *
• Evolution of industry - Kushal Biswas
• Segment of steel industry - – Abhishek Ghosh
• Industry Structure
• Production function
• Economies to scale – Deepak Das
• Indian steel industry
• Growth Prospectus - Abdul Jabbar S.
• Concentration Curve
• H Index
• Demand Curve – Sanjeet Singh Thakur
• SWOT Analysis
• Recommendations – Anirban Mukharjee
3. *
• The Indian iron & steel industry is nearly a century old, with TISCO (Tata
Steel) as the first integrated steel plant set up in 1907 in Jamshedpur.
• First blast furnace of TISCO was blown in on 2nd December 1911, and the first
ingot rolled on 16th February 1912.
• Afterwards a few more steel companies were established namely Mysore Iron
and Steel Company, (later renamed Vivesvaraya Iron & Steel Ltd) in 1923; Steel
Corporation of Bengal (later renamed Martin Burn Ltd and Indian Iron & Steel
Ltd) in 1939. All these companies were in the private sector.
• In 1948, A new Industrial Policy Statement states that new ventures in the iron
and steel industry are to be undertaken only by the central government. After
that Hindustan Steel created to oversee the Rourkela , Bhilai, Durgapur &
Bokaro steel plant.
• In 1973, The Steel Authority of India Ltd. (SAIL) is created as a holding
company to oversee most of India's iron and steel production.
• A new industrial policy introduced in the wake of the early 1990s balance of
payments crisis removed many of the restrictions on the steel industry and tariff
barriers were reduced , furthermore, foreign investment in the sector was
permitted, with the steel industry included on the list of ‘high priority’ industries
for automatic approval of up to 51 per cent foreign equity investment.
4. *
* Types of steel – 1) Alloy steel.
2) Non alloy steel.
* In 2010-11 non-alloy steel constituted 96 percent of total finished steel
production and rest was alloy steel.
* The top Six segments are Bars & rods, structural, HR
coil/strips/skelps, CR coils/strips, plates and GC/GP sheets.
* Of total finished (non-alloy) productions of bars & rods (non-flat
product) and hot rolling coils/skelp/strips (flat product) were 37.48
percent and 22.27 percent, respectively. Together these two major
products constituted for 59.75 percent of total finished (non-alloy) steel
production in 2010-11. This trend has been more or less constant for
last five years
5. *
Steel industry shows oligopoly which can be demonstrated by:-
1. Few players controlling the largest chunk of business namely TATA
STEEL, JINDAL, ESSAR and SAIL.
2. Barriers to entry, demonstrated by huge investment and requirement of other
resources in quantity.
3. Interdependence among the players in the industry, as the actions of
few affects the industry on whole.
4. COLLUSIVE nature: - All the firms coming together to protect mutual
interests.
5. Price leadership: - Minimum price ranges of firms is (2-4)%, displaying
the affinity to avoid price wars which may in turn lower profits. Thus, it
can also be conclude that there is evidence of kinked demand curve, as a
rise in price will entice customers to switch to lower price products
6. *
* production function is a function that specifies the output of a firm, an
industry, or an entire economy for all combinations of inputs.
* Mainly two types of input are there
1. Fixed – e.g.. plant and a factory shed.
2. Variable – e.g.. iron ore serves as a variable input
* For a firm minimizing Costs are important.
* Costs associated with inputs are
1. Total cost - cost of producing any given output level.
2. Average Cost - Decreases with increased output.
* Decrease in Average Variable Cost increases Profit.
* Average variable cost shows U shaped curve (first decrease then increase)
Economies to scale
Economies of scale are defined in terms of the average cost
per unit of output produced.
* In oligopoly companies run in economies to scale.
7. INDIAN STEEL INDUSTRY
A BRIGHT FUTURE
RESOURCES
Abundant Iron Ore reserves
Strong Managerial skills in Iron and Steel making
Large pool of skilled Man-power
Established steel players with strong skills in steel making
OPPORTUNITIES
High economic growth driven increasingly by industry
Faster Urbanisation
Increased Fixed Asset Building
Automobiles and component industry growth
POLICY
Pro-active stance of Govt.
Encouragement for overseas investments
8. *
countr 2009 2010 2011
y
world 1219 1425 1490
china 573 626 683
japan 87.5 109.6 107
usa 78.6 80.6 86.2
india 64.6 68.3 72.3
9. * Steel Consuming sectors
Source: CRISIL Research
Construction & infrastructure contribute to >60% of
steel consumption
10. *
Year Per Capita Steel Consumption
2011-12 48
2019-20 80
2024-25 110
2029-30 135
2034-35 175
India’s current population is - 1100 million
It is assumed that till 2051, population would be about : 1.4 bn.
12. *
* Concentration ratio is a measure of the total output produced in an industry by a given number
of firms in the industry.
* The most common concentration ratios are the CR4 and the CR8.
* This ratio shows the degree to which an industry is oligopolistic.
* it can be expressed as
* CRm = s1 + s2 + .... + sm
* where si is the market share and m defines the ith firm
* Concentration ratio of Indian steel industry
Top 4 Companies in India
1. Tata steel – 35.7%
2. SAIL – 23.8%
3. JSW steel – 9.7%
4. RNIL – 8%
5. Others – 22.8%
CR4 = 35.7 + 23.8 + 9.7 + 8
CR4 = 77.8 %
Interpretation - Concentration ratio of industry is 77.8% which means it is an oligopoly situation
and market is dominated by few major players.
13. *
* a measure of the size of firms in relation to the industry.
* an indicator of the amount of competition among companies.
* It is defined as the sum of the squares of the market shares of the 50
largest firms.
* It is expressed as
* H Index for steel industry in India
H = .3572 + .2382 + .0972 + .082 + 15*.222
H = 0.2033
Interpretation:
it implies that competition in steel industry is medium to high and
high concentration.
14. *
* In an oligopoly, firms operate under imperfect competition.
* firms use non-price competition in order to accrue greater revenue and
market share.
* Demand curve of oligopoly is kinked (hypothesized convex bend).
15. * At kink there is the most likely to collusion to take place
16. • There will is price stickiness in oligopolistic markets.
• Firms rely more on non price competition.
17. STRENGHTH:
Increase in demand WEAKNESS:
Availability of labour at low Lack of infrastructure
wage rate Slow decision making
Huge resource of raw material Low labour productivity
Environmental laws Insufficient transport system
SWOT ANALYSIS
THREATS:
Cheap imports.
OPPURTUNITIES:
Slow industry growth
High potential to be tapped.
Technological change
Unexplored rural market.
Price sensitivity and demand
Export market penetration.
volatility
18. FACTORS HOLDING BACK THE INDIAN
STEEL INDUSTRY
Problems procuring raw material inputs.
Inefficient transport system
Technological Innovation
19. RECOMMENDATIONS
R&D focus is to be increased substantially.
Firms must do technological forecasting.
Resource utilization must be more effective to
improve on the productivity
Investment in infrastructure is crucial to step up
demand for steel