Ons industrieterrein echt duurzaam veranderd! Waarmee, hoe, waarom... Grad van Heck
Stel je je eens voor: jouw gebouw en terrein is toonaangevend op het gebied van duurzaam en flexibel bouwen. Leidend in de aanpak van energieverbruik, ruimtelijke aanpak. Dienstverlenend, oplossingsgericht en vol eigen initiatief. Zuinig in gebruik en goed leefbaar.
Hoe, waarmee, welk doel? Het is gelukt.
Ons industrieterrein echt duurzaam veranderd! Waarmee, hoe, waarom... Grad van Heck
Stel je je eens voor: jouw gebouw en terrein is toonaangevend op het gebied van duurzaam en flexibel bouwen. Leidend in de aanpak van energieverbruik, ruimtelijke aanpak. Dienstverlenend, oplossingsgericht en vol eigen initiatief. Zuinig in gebruik en goed leefbaar.
Hoe, waarmee, welk doel? Het is gelukt.
de syllabus van de infoavond Warm Water heruitgevonden. Deze sessie vond plaats op 3 en 7 mei 2013, en was een organisatie van Bouwunie Antwerpen en Vlaams-Brabant
Een principe waarbij men
uitgaat van het back-to-basic principe.
Dus veel passieve opwarming van
de lucht door middel van grote glasoppervlakten,
die via vides verspreid
wordt door de woning. Ventilatie zal
op een natuurlijke manier plaatsvinden,
waardoor de toepassing van onnodig
ingewikkelde installaties zoveel mogelijk
wordt voorkomen. Comfort, gemak en
lage energielasten staan centraal bij
deze ontwikkeling.
Een nieuw gebouw wordt doorgaans
ontworpen om minimaal 50 jaar te bestaan.
De levensduur van de installaties
is echter slechts een jaar of 15. Een huis
dat zonder kunstmatige hulpmiddelen
comfortabel en gezond is, is levensvatbaar.
Een energiezuinige woning die
zonder onnodig ingewikkelde installaties
mee kan gaan met de tijd, heeft echt
toekomstwaarde. Dit wordt gerealiseerd
door voornamelijk gebruik te maken
van de meest duurzame energiebron,
de zon, en het natuurlijk ventileren van
de woningen zonder al te veel installaties
toe te passen.
Strong reversal of the lung fibrosis disease signature by autotaxin inhibitor...Maté Ongenaert
Strong reversal of the lung fibrosis disease signature by autotaxin inhibitor GLPG1690 in a mouse model for IPF
Maté Ongenaert (Mechelen, Belgium), Maté Ongenaert, Sonia Dupont, Roland Blanqué, Reginald Brys, Ellen van der Aar, Bertrand Heckmann
ERS - European Respiratory Society International Congress 2016. Session: Therapeutic horizons: novel targets and pharmacological models
Background and objectives
GLPG1690 is a novel potent autotaxin (ATX) inhibitor shown to be efficacious in the mouse bleomycin (BLM) lung fibrosis model. Here, we analyze the impact of GLPG1690 on the gene expression signature in mouse fibrotic lung tissue.
Methods
Lung fibrosis was induced by intranasal administration of BLM. Animals were treated with GLPG1690 or vehicle.Whole superior right lung was used for RNA extraction. Full transcriptome analysis was performed using the Agilent SurePrint G3 mouse chip. Analysis was performed using empirical Bayes methods and linear models. Public human IPF expression data were re-analyzed.
Results
GLPG1690 strongly reduced lung fibrosis as shown by reduction of Ashcroft scores and collagen content. Microarray analysis of the lungs revealed that GLPG1690 strongly reversed the impact of gene expression caused by BLM (367 out of the 2375 probes). As GLPG1690 treatment affects 395 probes, this treatment effect is highly relevant in the model. Gene clusters affected by BLM treatment and reverted by GLPG1690 are related to extracellular matrix (such as Tnc and Spp1), collagen (Col3a1) and cytokines/chemokines (Cxcl12). Several of the affected genes are known to be involved in the development or progression of lung fibrosis in IPF patients.
Conclusions
These data provide further mechanistic understanding of the efficacy of ATX inhibition in a pre-clinical lung fibrosis model, highlighting a role for extracellular matrix and inflammation biology. These data strongly suggest that GLPG1690 may be beneficial in treating IPF patients and support its evaluation in a clinical study
Open human genome data - presentation at the annual TKT/CLIDP doctoral programme symposium 2016 "Open up! – Open Data and Open Access" of the University of Turku.
New Progress in Pyrosequencing for DNA MethylationQIAGEN
Pyrosequencing is a highly flexible technology that lets you rapidly analyze short- to medium-length sequences fast and quantitatively with high accuracy. The real-time, high-resolution sequence output makes the technology highly suitable for applications including complex mutation analysis, microbial identification and DNA methylation quantification.
The main bottleneck in Pyrosequencing has been limited sequence length, which is critical for some applications. Our new technology, software, and chemistry overcome this bottleneck and give sequence reads that are typically twice as long as those from previous PyroMark systems. The new PyroMark Q24 Advanced system also reduces background noise, improving quantification even at sites distant from the sequencing start. The new system is ideal for applications requiring analysis of longer sequences, such as DNA methylation analysis in epigenetic research, frequency determination in mutation analysis, and various de novo sequencing applications.
In this presentation, we will discuss the following applications and technology improvements:
• DNA methylation analysis at single base resolution at CpG and CpN sites
• Improved quantification of sequence variations at any sequence position
• Easy and improved base calling functionality
PCR - From Setup to Cleanup: A Beginner`s Guide with Useful Tips and Tricks -...QIAGEN
This End-Point PCR Beginner´s Guide will not only give you a comprehensive overview of tools and techniques to help you to get the most out of your samples, but also give you information on dedicated solutions and complete workflows on multiplex PCR and PCR fragment analysis.
Microbiome Profiling with the Microbial Genomics Pro SuiteQIAGEN
In this slide deck, we introduce the scientist-friendly Microbial Genomics Pro Suite offering workflows optimized for microbiome profiling, microbial typing and outbreak analysis. The workflows and tools for microbial genomics introduced with this software package are further extending the comprehensive set of genomics, transcriptomics and epigenomics analysis solutions that researchers know from CLC Genomics Workbench.
Clinical Metagenomics for Rapid Detection of Enteric Pathogens and Characteri...QIAGEN
High-throughput sequencing, combined with high-resolution metagenomic analysis, provides a powerful diagnostic tool for clinical management of enteric disease. Forty-five patient samples of known and unknown disease etiology and 20 samples from health individuals were subjected to next-generation sequencing. Subsequent metagenomic analysis identified all microorganisms (bacteria, viruses, fungi and parasites) in the samples, including the expected pathogens in the samples of known etiology. Multiple pathogens were detected in the individual samples, providing evidence for polymicrobial infection. Patients were clearly differentiated from healthy individuals based on microorganism abundance and diversity. The speed, accuracy and actionable features of CosmosID bioinformatics and curated GenBook® databases, implemented in the QIAGEN Microbial Genomics Pro Suite, and the functional analysis, leveraging the QIAGEN functional metagenomics workflow, provide a powerful tool contributing to the revolution in clinical diagnostics, prophylactics and therapeutics that is now in progress globally.
This slidedeck details two comprehensive informatics solutions — the Biomedical Genomics Workbench and Ingenuity Knowledge Base Variant Analysis platforms. We show the intuitive user interface of CLC Cancer Research Workbench and demonstrate how the rich biological content from Ingenuity Knowledge Base helps you rapidly identify critical variants in your samples.
de syllabus van de infoavond Warm Water heruitgevonden. Deze sessie vond plaats op 3 en 7 mei 2013, en was een organisatie van Bouwunie Antwerpen en Vlaams-Brabant
Een principe waarbij men
uitgaat van het back-to-basic principe.
Dus veel passieve opwarming van
de lucht door middel van grote glasoppervlakten,
die via vides verspreid
wordt door de woning. Ventilatie zal
op een natuurlijke manier plaatsvinden,
waardoor de toepassing van onnodig
ingewikkelde installaties zoveel mogelijk
wordt voorkomen. Comfort, gemak en
lage energielasten staan centraal bij
deze ontwikkeling.
Een nieuw gebouw wordt doorgaans
ontworpen om minimaal 50 jaar te bestaan.
De levensduur van de installaties
is echter slechts een jaar of 15. Een huis
dat zonder kunstmatige hulpmiddelen
comfortabel en gezond is, is levensvatbaar.
Een energiezuinige woning die
zonder onnodig ingewikkelde installaties
mee kan gaan met de tijd, heeft echt
toekomstwaarde. Dit wordt gerealiseerd
door voornamelijk gebruik te maken
van de meest duurzame energiebron,
de zon, en het natuurlijk ventileren van
de woningen zonder al te veel installaties
toe te passen.
Strong reversal of the lung fibrosis disease signature by autotaxin inhibitor...Maté Ongenaert
Strong reversal of the lung fibrosis disease signature by autotaxin inhibitor GLPG1690 in a mouse model for IPF
Maté Ongenaert (Mechelen, Belgium), Maté Ongenaert, Sonia Dupont, Roland Blanqué, Reginald Brys, Ellen van der Aar, Bertrand Heckmann
ERS - European Respiratory Society International Congress 2016. Session: Therapeutic horizons: novel targets and pharmacological models
Background and objectives
GLPG1690 is a novel potent autotaxin (ATX) inhibitor shown to be efficacious in the mouse bleomycin (BLM) lung fibrosis model. Here, we analyze the impact of GLPG1690 on the gene expression signature in mouse fibrotic lung tissue.
Methods
Lung fibrosis was induced by intranasal administration of BLM. Animals were treated with GLPG1690 or vehicle.Whole superior right lung was used for RNA extraction. Full transcriptome analysis was performed using the Agilent SurePrint G3 mouse chip. Analysis was performed using empirical Bayes methods and linear models. Public human IPF expression data were re-analyzed.
Results
GLPG1690 strongly reduced lung fibrosis as shown by reduction of Ashcroft scores and collagen content. Microarray analysis of the lungs revealed that GLPG1690 strongly reversed the impact of gene expression caused by BLM (367 out of the 2375 probes). As GLPG1690 treatment affects 395 probes, this treatment effect is highly relevant in the model. Gene clusters affected by BLM treatment and reverted by GLPG1690 are related to extracellular matrix (such as Tnc and Spp1), collagen (Col3a1) and cytokines/chemokines (Cxcl12). Several of the affected genes are known to be involved in the development or progression of lung fibrosis in IPF patients.
Conclusions
These data provide further mechanistic understanding of the efficacy of ATX inhibition in a pre-clinical lung fibrosis model, highlighting a role for extracellular matrix and inflammation biology. These data strongly suggest that GLPG1690 may be beneficial in treating IPF patients and support its evaluation in a clinical study
Open human genome data - presentation at the annual TKT/CLIDP doctoral programme symposium 2016 "Open up! – Open Data and Open Access" of the University of Turku.
New Progress in Pyrosequencing for DNA MethylationQIAGEN
Pyrosequencing is a highly flexible technology that lets you rapidly analyze short- to medium-length sequences fast and quantitatively with high accuracy. The real-time, high-resolution sequence output makes the technology highly suitable for applications including complex mutation analysis, microbial identification and DNA methylation quantification.
The main bottleneck in Pyrosequencing has been limited sequence length, which is critical for some applications. Our new technology, software, and chemistry overcome this bottleneck and give sequence reads that are typically twice as long as those from previous PyroMark systems. The new PyroMark Q24 Advanced system also reduces background noise, improving quantification even at sites distant from the sequencing start. The new system is ideal for applications requiring analysis of longer sequences, such as DNA methylation analysis in epigenetic research, frequency determination in mutation analysis, and various de novo sequencing applications.
In this presentation, we will discuss the following applications and technology improvements:
• DNA methylation analysis at single base resolution at CpG and CpN sites
• Improved quantification of sequence variations at any sequence position
• Easy and improved base calling functionality
PCR - From Setup to Cleanup: A Beginner`s Guide with Useful Tips and Tricks -...QIAGEN
This End-Point PCR Beginner´s Guide will not only give you a comprehensive overview of tools and techniques to help you to get the most out of your samples, but also give you information on dedicated solutions and complete workflows on multiplex PCR and PCR fragment analysis.
Microbiome Profiling with the Microbial Genomics Pro SuiteQIAGEN
In this slide deck, we introduce the scientist-friendly Microbial Genomics Pro Suite offering workflows optimized for microbiome profiling, microbial typing and outbreak analysis. The workflows and tools for microbial genomics introduced with this software package are further extending the comprehensive set of genomics, transcriptomics and epigenomics analysis solutions that researchers know from CLC Genomics Workbench.
Clinical Metagenomics for Rapid Detection of Enteric Pathogens and Characteri...QIAGEN
High-throughput sequencing, combined with high-resolution metagenomic analysis, provides a powerful diagnostic tool for clinical management of enteric disease. Forty-five patient samples of known and unknown disease etiology and 20 samples from health individuals were subjected to next-generation sequencing. Subsequent metagenomic analysis identified all microorganisms (bacteria, viruses, fungi and parasites) in the samples, including the expected pathogens in the samples of known etiology. Multiple pathogens were detected in the individual samples, providing evidence for polymicrobial infection. Patients were clearly differentiated from healthy individuals based on microorganism abundance and diversity. The speed, accuracy and actionable features of CosmosID bioinformatics and curated GenBook® databases, implemented in the QIAGEN Microbial Genomics Pro Suite, and the functional analysis, leveraging the QIAGEN functional metagenomics workflow, provide a powerful tool contributing to the revolution in clinical diagnostics, prophylactics and therapeutics that is now in progress globally.
This slidedeck details two comprehensive informatics solutions — the Biomedical Genomics Workbench and Ingenuity Knowledge Base Variant Analysis platforms. We show the intuitive user interface of CLC Cancer Research Workbench and demonstrate how the rich biological content from Ingenuity Knowledge Base helps you rapidly identify critical variants in your samples.
NGS Targeted Enrichment Technology in Cancer Research: NGS Tech Overview Webi...QIAGEN
This slidedeck discusses the most biologically efficient, cost-effective method for successful NGS. The GeneRead DNA QuantiMIZE Kits enable determination of the optimum conditions for targeted enrichment of DNA isolated from biological samples, while the GeneRead DNAseq Panels V2 allow you to quickly and reliably deep sequence your genes of interest. Applications in translational and clinical research are highlighted.
Next-Generation Sequencing an Intro to Tech and Applications: NGS Tech Overvi...QIAGEN
This slidedeck provides a technical overview of DNA/RNA preprocessing, template preparation, sequencing and data analysis. It covers the applications for NGS technologies, including guidelines for how to select the technology that will best address your biological question.
Een goed geïsoleerd huis heeft veel voordelen: minder kou en tocht, een lagere energierekening en minder CO2-uitstoot. Maar liefst 2 van de 3 woningen in Nederland hebben nog geen goede isolatie. SMARTCirculair geeft in deze toolkit een overzicht van mogelijkheden en materialen om je woning duurzaam te isoleren en energie te besparen. TIP: gebruik biobased materialen voor een gezond binnenklimaat.
Wat kun je isoleren
Isolatie kiezen
Welke uitvoering van isolatie kies ik best?
Dat hangt vooral af van jouw situatie en wensen.
Laat je je dak langs binnen of langs buiten isoleren?
Hoeveel opbouwhoogte heb je voor het isoleren van je vloer?
Kan je je bestaande spouwmuur isoleren of moet je je binnenmuur isoleren?
De woningen en gebouwen die we op 12 en 14 november 2015 bezochten, tijdens de (bijna) Nul-op-de-meter route in Amsterdam. Georganiseerd door KvK en NEWNRG
Wouter Cyx van Kelvin Solutions op Translab Kampus (Turnhout, juni 2018) over huishoudelijke warmtevoorziening zonder aardgas, en wat daar voor een wijk voor nodig is tegen 2050
Trend: Energiebesparing in de bestaande bouw en nieuwbouw
Wouter Borsboom,
TNO
Compacte Warmteopslag
In de Icoonwoning te Heerhugowaard is met succes de eerste demonstrator van Compacte Warmteopslag getest. Deze door TNO ontworpen installatie geeft het principe aan dat het op het ene moment het overschot aan zonnewarmte opgeslagen kan worden in een mineraal. En op een ander moment komt deze warmte weer beschikbaar voor het verwarmen van de woning en de bereiding van tapwater. Deze revolutionaire vorm van energieopslag heeft het in zich om de cv-ketel en de warmtepomp (deels) overbodig te maken. Tijdens deze bijeenkomst wordt u geïnformeerd over de resultaten van de testperiode en over de volgende stappen voor de marktintroductie van deze veel belovende techniek.
Presentatie Nudge Zonnekracht van 12 dec 2011 te Schiebroek (Rotterdam) met buurburgemeester Mark Slegers en bijdrage van Zon en Zo en Ravensteyn. Voor contact met de buurtburgemeester: zonnekracht@cleargreenconsultancy.nl of via http://www.nudge.nl/zonnekracht of http://www.nudge.nl/buurt58
In het kader van het innovatieproject Zwartkruis een speciale lezing georganiseerd door Centrum Duurzaam over bitumineuze en duurzame dakbedekkingssystemen voor deelnemers van de technische- en bouwopleidingen. Verzorgd door Troelstra & De Vries uit IJlst.
Exploring the neuroblastoma epigenome: perspectives for improved prognosisMaté Ongenaert
EXPLORING THE NEUROBLASTOMA EPIGENOME: PERSPECTIVES FOR THE DISCOVERY OF PROGNOSISTIC BIOMARKERS
M. Ongenaert, A. Decock, J. Vandesompele, F. Speleman
Center for Medical Genetics, Ghent University, Ghent, Belgium (mate.ongenaert@ugent.be)
Neuroblastoma (NB) is a childhood tumor originating from sympathetic nervous system cells. Although recently new insights into genes involved in NB have emerged, the molecular basis of neuroblastoma development and progression still remains poorly understood. The best-characterized genetic alterations include amplification of the proto-oncogene MYCN, ALK activating mutations or amplification, gain of chromosome arm 17q and losses of 1p, 3p, and 11q. Epigenetic alterations have been described as well: caspase-8 (CASP8) and RAS-association domain family 1 isoform A (RASSF1A) DNA-methylation are important events for the development and progression of neuroblastoma. In total, there are about 75 genes described as epigenetically affected in NB cell lines and/or NB primary samples.
Most of these methylation markers are found using ‘candidate gene’ approaches and the methylation frequencies are usually very low. In order to find novel methylation markers that can be used for improved prognosis, we applied a whole-genome methylation screen. This technique relies on capturing with the MBD2 protein, containing a methyl-binding domain (MBD), with a very high affinity towards methylated genomic regions. In an initial phase, MBD2-seq was performed on 8 NB cell lines (where we also had micro-array data of, before and after treatment with DAC). As these results are promising, we will explore the complete methylomes of 45 primary NB tumors.
Based on an integrative analysis (re-expression results, expression micro-arrays, MBD2-sequencing on cell lines), 48 MSP (Methylation Specific PCR) assays were tested on 89 primary neuroblastoma patients of different risk categories. The results of this validation study demonstrate the power of epigenetic biomarkers as several assays are informative for prognosis and survival.
High-throughput proteomics: from understanding data to predicting themMaté Ongenaert
High-throughput proteomics: from understanding data to predicting themprof. dr. Lennart Martens
UGent - Department of Biochemistry, Faculty of Medicine and Health Sciences, VIB - Group Leader Computational Omics and Systems Biology Group (CompOmics), Department of Medical Protein Research
In proteomics, as in any high-throughput omics field, the rate of data generation has increased dramatically, yielding very large datasets that require substantial processing to render them useful and interpretable. Key concepts here are data management, data-bound analysis algorithms, and user interface design. But we do not need to limit ourselves to only the interpretation of experimental results. By combining data from across many (unrelated) experiments, we can gain substantial knowledge about the strengths and limitations of our technological approaches. High-throughput methods however, rarely serve as the endpoint for research. As exquisite parallel hypothesis testers, these approaches can quickly highlight promising follow-up targets for more detailed study. Yet moving from discovery to targeted analysis requires much more in-depth understanding of sample and methodology, which is where the insights gained from large-scale data analysis come into play. Armed with this knowledge, we can begin to predict experimental outcomes based on specific hypotheses, thus effectively creating tests or assays that can be used in focused validation experiments
Microarray data and pathway analysis: example from the benchMaté Ongenaert
Microarray data and pathway analysis: example from the bench
by drs. Jolien Vermeire - HIVlab, Department of Clinical Chemistry, Microbiology and Immunology – UGent
The increased availability and lower cost of gene expression microarrays has stimulated the use of transcriptome studies in a high variety of fields. Generating expression data at whole-genome level can indeed be a powerful method to characterize cellular pathways involved in a certain biological process. However, the challenge of extracting relevant biological information from such large datasets still prevents researchers from exploiting this tool. In this presentation I will share my personal experience, as a 'researcher non-bioinformatician', with performing microarray data and pathway analyses. I will give a general overview of the different steps that where followed in order to transform raw gene expression data, obtained in context of HIV research, into useful biological information and highlight different methods and software tools that helped me in this process.
Large scale machine learning challenges for systems biologyMaté Ongenaert
Large scale machine learning challenges for systems biology
by dr. Yvan Saeys - Machine Learning and Data Mining group, Bioinformatics and Systems Biology Division, VIB-UGent Department of Plant Systems Biology
Due to technological advances, the amount of biological data, and the pace at which it is generated has increased dramatically during the past decade. To extract new knowledge from these ever increasing data sets, automated techniques such as data mining and machine learning techniques have become standard practice.
In this talk, I will give an overview of large scale machine learning challenges in bioinformatics and systems biology, highlighting the importance of using scalable and robust techniques such as ensemble learning methods implemented on large computing grids.
I will present some of our state-of-the-art tools to solve problems such as biomarker discovery, large scale network inference, and biomedical text mining at PubMed scale.
Integrative transcriptomics to study non-coding RNA functionsMaté Ongenaert
Integrative transcriptomics to study non-coding RNA functions
by dr. ir. Pieter Mestdagh - Center for Medical Genetics, Ghent University
Over the last years, non-coding RNAs (e.g. microRNAs and long non-coding RNAs) have emerged as an important layer of the transcriptome. In order to elucidate their function in disease biology, multiple tools have been developed, ranging from miRNA target prediction algorithms to the more advanced integrative genomics approaches. Through the combination of multiple layers of information, integrative genomics allows a more accurate and comprehensive assessment of non-coding RNA functions in human disease. In this presentation, I will discuss different approaches on how to combine multi-level transcriptome data in order to functionally characterize non-coding RNA networks.
Race against the sequencing machine: processing of raw DNA sequence data at t...Maté Ongenaert
Race against the sequencing machine: processing of raw DNA sequence data at the Genomics Core
by dr. Luc Dehaspe - Genomics Core, UZ Leuven
To grow and function, living organisms unconsciously and continuously read instructions from the DNA sequence in each cell. Thanks to the advances in DNA sequencing technology, scientists are increasingly able to consciously read along. In 2001, sequencing efforts resulted in a first draft of human genome. Since then, the capacity of the DNA reading machines has doubled every six months on average. While the first human genome sequencing project took years of worldwide collaboration, multiple genomes can now be sequenced in 10 days on a single machine at a service facility such as the Genomics Core.
Each sequencing run gives rise to a few terabytes of raw data that, using bioinformatics techniques, must be processed in time, before the next bunch of data arrives.
I will discuss bioinformatics techniques that are commonly used in the Genomics Core and that have a chance to survive another generation of sequencing machines. <\br>A crucial feature of these techniques is that they keep up with the sequencing machines by creating sub-tasks that are distributed over an extensible network of computers.
Bringing the data back to the researchers
by ir. Geert Trooskens - BIOBIX, UGent
Genome wide analysis is getting bigger, better and faster.
Researchers are looking for answers in the vast amounts of different data sets that come out these analyses, conceivably leaving important information on a storage disk.
We present the Hitchhikers Guide to the Genome (H2G2): a platform that allows (epi-)genetic, genomic, and proteomic data fusion and visualization.
The post-genomic era: epigenetic sequencing applications and data integrationMaté Ongenaert
The post-genomic era: epigenetic sequencing applications and data integration
by dr. ir. Maté Ongenaert - Center for Medical Genetics, Ghent University
The past decade is known as the post-genomic era. Ever since the first published human genomes, the pace to determine new genomes ever increased. In addition, a number of new sequencing applications gave access to previously unexplored areas at a genome-wide scale such as whole epigenomes.
In this talk, the data generated from a number of sequencing techniques to determine whole DNA-methylomes and whole genome histone marks will be discussed.
Main goal: to convince scientists that the analysis tools have matured to a level that, using a good manual and insight in the mechanisms behind the analysis, they can do their own basic analyses.
Starting from a raw sequence file, over quality control to mapping to the reference genome, peak calling, visualization and identification of differentially methylated sites: within the time-frame of this talk, the entire process will be demonstrated.
As epigenetics regulates genomic processes and literally is a layer above genetics, able to fine-tune regulatory processes, several layers of information should be look at to understand the underlying mechanisms.
Important aspect in the analysis of epigenetic datasets thus is the integration of several data sources (expression results, re-expression results, DNA-methylation information and histone-modifications).
1. Passiefhuis in Lokeren
Ontwerp & uitvoering in woord en beeld
Inhoud
Wat is een passiefhuis en waarom een passiefhuis?
Passiefhuiselementen in onze woning – ontwerp en uitvoering
Ons passiefhuis: van fundering tot luchtdichte passiefwoning
http://passiefhuis-lokeren.blogspot.com
Ecobouwers opendeurdag 2012
Maté Ongenaert - Renate Buysse & Karel
Architect: Manu Ongenaert
2. Passiefhuis in Lokeren
Ontwerp & uitvoering in woord en beeld
Disclaimer:
Wij zijn ‘gewone’ particulieren die geen enkele binding hebben met
aannemers, bouwbedrijfen, advies of studiebureaus, fabricanten,…
Wij zij ook niet gesponsord en kunnen dus in alle vrijheid goede en negatieve punten
vermelden van producten en aannemers. Dit zal steeds enkel en alleen onze eigen mening
vertegenwoordigen.
Ecobouwers opendeurdag 2012
Maté Ongenaert - Renate Buysse & Karel
Architect: Manu Ongenaert
3. Passiefhuis in Lokeren
Wat is een passiefhuis?
Wat is een passiefhuis?
Zeer energiezuinig gebouw gericht op een
goed winter- en zomercomfort. De
warmteverliezen zijn er door een
doorgedreven isolatie zo beperkt, dat er
slechts een zeer kleine energievraag voor
verwarming en koeling nodig is.
Bij de meest extreme buitencondities is er
echter wél een actieve verwarmingsbron
nodig. Die is echter zeer klein. De
warmtevraag kan bijvoorbeeld opgevangen
worden door het plaatsen van een kleine
radiator of convector in de leefruimte of
badkamer. Aangezien er dus bijna niet
meer actief wordt verwarmd, spreekt men
van een 'passief' gebouw of 'passiefhuis'.
Bron: passiefhuisplatform
4. Passiefhuis in Lokeren
Wat is een passiefhuis?
Wat is een passiefhuis?
4 (+2) aandachtspunten
1. Warmteverliezen beperken door ver
doorgedreven isolatie
2. Warmteverliezen beperken door zeer
goede luchtdichtheid van het gebouw
3. Warmtewinsten optimaliseren door
gebruik van passieve energie
4. Luchtkwaliteit waarborgen door
ventilatie met warmteterugwinning
5. Hernieuwbare energie
6. Laag energiegebruik door efficiënte
apparaten
Bron: passiefhuisplatform
5. Passiefhuis in Lokeren
Ontwerp & uitvoering in woord en beeld
Inhoud
Wat is een passiefhuis en waarom een passiefhuis?
Passiefhuiselementen in onze woning – ontwerp en uitvoering
Ons passiefhuis: van fundering tot luchtdichte passiefwoning
Ecobouwers opendeurdag 2012
Maté Ongenaert - Renate Buysse & Karel
Architect: Manu Ongenaert
6. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Wat is een passiefhuis?
4 (+2) aandachtspunten
1. Warmteverliezen beperken door ver doorgedreven isolatie
Maatregelen:
U-waarde van vloeren, muren, daken < 0,15 W/m²K
U-waarde van buitenschrijnwerk < 0,8 W/m²K
U-waarde van beglazing < 0,8 W/m²K
Lineaire warmtedoorgangscoëfficiënt < 0,01 W/mK
Ontwerp
Rekening houden met isolatiematerialen, hun eigenschappen en hun dikte
Berekening van vereiste isolatiewaarden in elk bouwdeel (dak/wand/…)
7. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Vloerisolatie:
26 cm PUR (Recticel Eurofloor –
lambda 0,023)
als drukvaste isolatieplaat onder
gewapende betonplaat,
doorlopend naar de wanden
Ononderbroken isolatieschild,
met warmtebuffer in de
betonplaat
Opbouw: mager beton – 26 cm
PUR – 18 cm gewapende
betonplaat – 6 cm chape – 2 cm
vloerafwerking
U(vloer)=0,10 W/m²K
8. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Wandisolatie:
40 cm cellulose (Isofloc L - lambda
0,039) tussen FJI liggers -
buitenzijde: dampopen en
isolerende bitumeuze
houtvezelplaat (Celit3D –
lambda 0,050) - Binnenzijde:
geïsoleerde leidingenspouw
(glaswol – lambda 0,032)
opbouw:
Binnenafwerking (12 mm Gyproc),
6 cm leidingenspouw, 18 mm
OSB-plaat, FJI-liggers van 40 cm.
dikte, gevuld met cellulose-
isolatie, 12 mm Celit3D plaat,
lattenwerk (geventileerde
spouw) Trespa meteon paneel
U wand=0,10
9. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Dakisolatie (plat dak):
30 cm PUR (Recticel Bi3 – lamda
0,026 )met EPDM zonder balast,
hellingspie geïsoleerd met
rotswol tussen OSB platen
(warm dak)
U(plat dak)=0,08 W/m²K
10. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Dakisolatie (hellend dak):
20 cm PUR (Recticel Powerroof –
lambda 0,023) en 18 cm
cellulose tussen de dakspanten;
Celit4D onderdak,
leidingenspouw
Opbouw:
afwerking, 6 cm leidingenspouw,
Intello + intelligente folie,
houten keperwerk met 18 cm.
cellulose-isolatie, 20 cm PUR, 18
18 mm Celit4D onderdak,
lattenwerk, Steeldeck
U(schuin dak)=0,08 W/m²K
11. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Ramen:
Drievoudig glas (U waarde 0,5) en
thermisch onderbroken kaders
(hout-alu)(Internorm); g-
waarde 50%
U-waarde(raam) ~ 0,72 W/m²K
12. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Wat is een passiefhuis?
4 (+2) aandachtspunten
2. Warmteverliezen beperken door zeer goede luchtdichtheid van het
gebouw
Maatregelen:
n50-waarde < 0,6 h-1
13. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Vloer:
Beton is luchtdicht
Wanden zijn luchtdicht
Overgang niet luchtdicht
Luchtdichte folie (Proclima DA
folie) te verkleven op de
betonplaat (Orcon lijm) en de
wand (luchtdichte tape)
14. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Wand:
OSB-plaat van 18 mm is zeer
luchtdicht; tand-en
groefsysteem, verlijmd: niet
gegarandeerd luchtdicht
Luchtdichte tape gebruiken om
overlappende naad dicht te
tapen (Siga of Proclima
producten)
15. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Dak (plat dak):
OSB-plaat en luchtdichte folie
onder dakisolatie (Proclima
Intello die verkleefd wordt aan
wand)
16. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Dak (hellend dak):
Intelligent (vochtgestuurde)
luchtdichte folie (Intello +,
gewapend om cellulose in te
blazen)
Verkleed op wand en omheen
dakspanten
17. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Ramen:
Kader gekleefd (Proclima Tescon
Vana tape) en verlijmd (Orcon
F) aan multiplex kader dat op
zijn beurt verkleefd wordt aan
de wanden
18. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Luchtdichting
Meting van de luchtdichting via Blowerdoor test
(metingen van debieten, nodig om bepaalde over/onderdruk te bekomen in het gebouw)
Uitgedrukt in aantal luchtwisselingen per uur (n50 waarde)
inhoud van ons huis is 680 m³; behaalde waarde: 0,45 (< 0,60)
19. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Wat is een passiefhuis?
4 (+2) aandachtspunten
3. Warmtewinsten optimaliseren door gebruik van passieve energie
Maatregelen:
U-waarde van beglazing < 0,8 W/m²K
g-waarde van beglazing > 50 %
U-waarde van buitenschrijnwerk < 0,8 W/m2K
20. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Oriëntatie
Voorgevel op Z/ZW grote
raampartijen en ramen met
grootste g-waarde; ramen op
noorden met lagere g-waarde
(en lagere U waarde glas)
Zonnewering voor zomercomfort
21. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Wat is een passiefhuis?
4 (+2) aandachtspunten
4. Luchtkwaliteit waarborgen door ventilatie met warmteterugwinning
Maatregelen:
efficiënte gelijkstroomventilator η < 0,45 W/(m³h)
rendement warmterecuperatie > 75%
22. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Ventilatie:
Systeem D met warmterecuperatie
en spiralietkanalen
- Compactsysteem Genvex:
ventilatie – sanitair warm
water in één (warmtepomp en
boilervat)
Winter:
Voorverwarming ventilatie via
glycolcircuit in de bodem
ventilatie <> warmte-
uitwisseling – warmtepomp
met energie uit uitgaande lucht
Zomer:
Koeling via glycolcircuit – ventilatie
met bypass (uitgaande, warme
lucht wordt afgevoerd)
23. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Wat is een passiefhuis?
4 (+2) aandachtspunten
5. Hernieuwbare energie
Maatregelen:
Optioneel, zonnecollectoren voor warm water; PV panelen
Verder energie besparen; eventueel naar ‘nulenergie’
24. Passiefhuis in Lokeren
Passiefhuiselementen in onze woning
Zonneboiler:
2 zonnecollectoren (5 m² collector;
druksysteem met glycol) en sturing;
collectorvat in compacttoestel (185 l)
PV panelen:
3 kWp panelen (12 x 250 Wp,
monokristalijn); geschatte opbrengst
3000 kWh per jaar
25. Passiefhuis in Lokeren
Ontwerp & uitvoering in woord en beeld
Inhoud
Wat is een passiefhuis en waarom een passiefhuis?
Passiefhuiselementen in onze woning – ontwerp en uitvoering
Ons passiefhuis: van fundering tot luchtdichte passiefwoning
Ecobouwers opendeurdag 2012
Maté Ongenaert - Renate Buysse & Karel
Architect: Manu Ongenaert