This document discusses electronic waste recycling. It lists group members and then describes how electronic waste includes used electronics that are collected for reuse, resale, recycling, or disposal. It explains that most e-waste goes through a WEEE system that recycles 95-98% by weight and ensures data is destroyed. It also provides details about recycling CRT monitors, including separating the monitor body and cathode ray tube, shredding the tubes and screens into small pieces, and disposing of any glass dust carefully.
E waste management in India has taken a backseat as many companies are now having tie-ups with local vendors for e-waste recycling. This is the major factor for Virogreen to open its facility across the country.
Rainwater harvesting is the collection and storage of rain, rather than allowing it to run off. Rainwater is collected from a roof-like surface and redirected to a tank, cistern, deep pit, aquifer, or a reservoir with percolation, so that it seeps down and restores the ground water.
Rainwater harvesting is one of the simplest and oldest methods of self-supply of water for households, and residential and household-scale projects, usually financed by the user.[5] However, larger systems for schools, hospitals, and other facilities can run up costs only able to be financed by owners, organizations, and governmental units.
E waste management in India has taken a backseat as many companies are now having tie-ups with local vendors for e-waste recycling. This is the major factor for Virogreen to open its facility across the country.
Rainwater harvesting is the collection and storage of rain, rather than allowing it to run off. Rainwater is collected from a roof-like surface and redirected to a tank, cistern, deep pit, aquifer, or a reservoir with percolation, so that it seeps down and restores the ground water.
Rainwater harvesting is one of the simplest and oldest methods of self-supply of water for households, and residential and household-scale projects, usually financed by the user.[5] However, larger systems for schools, hospitals, and other facilities can run up costs only able to be financed by owners, organizations, and governmental units.
GREEN COMPUTING is a doc which is made to make some awareness to this world. Even technology can be harmful when it gets older.
So GO GREEN!!! GROW INDIA!!!
"The most common commodities capable of being recovered from electronics waste are various types and grades of steel, plastic, aluminum, CRT glass and pc board. After the e-waste is shredded and separated, these commodities are given new life by being sold and distributed to producers and manufacturers located all throughout the world.
This is from an article that appeared on All Green Website: http://www.allgreenrecycling.com/blog/e-waste-recycling-process/"
A complete PPT on E-Waste.
PPT: E-waste or Electronic Waste is the inevitable by-product of a technological revolution. Driven primarily by faster, smaller and cheaper microchip technology, society is experiencing an evolution in the capability of electronic appliances and personal electronics.E-waste is the most rapidly growing waste problem in the world. It is a crisis of not quantity alone but also a crisis born from toxic ingredients, posing a threat to the occupational health as well as the environment.
Visit www.topicsforseminar.com to Download
What is E-waste? – What causes E-waste?: Rapid development of upgraded electronic equipments forces the disposal of outdated equipments. – What makes E-waste hazardous?: All electronic equipments are made up of materials, which are harmful to human and pollute the environment when exposed. The harmful materials used in the manufacture of electronic equipments are Lead, Mercury, Plastics, CFCs, Cadmium, etc. – Current status of E-waste: E-waste now a day’s forces the world experts to turn back, as it’s a rapid growing problem in the developed and developing countries to recycle it or to dispose it safely so that they don’t pose any environmental pollution or hazards. – What caused the current state of E-waste: The lack of awareness about the hazardous & polluting nature of E-waste. And the cost to recycle E-wastes. – How to control E-waste? Reduce and Recycle: When a equipment is not working it doesn’t mean that the whole equipment has spoiled but generally just one part. By trying to use the equipments as long as possible by getting it repaired at service centers helps in reducing the accumulation of E-wastes. On the other hand certain equipments have to be disposed, at that time recycling of them prevents E-waste. – How to recycle?: The recycling of E-waste is not a simple process that can be performed all were, as they deal with harmful materials, and which requires lot of stuffs. The recycle of E-waste is done in many categories according to the material out of which it is made. – Benefits of recycling E-waste: The electronic equipments are made of material or resources such as Lead, Mercury, Plastics, CFCs, Cadmium, etc., which are nonrenewable can be recovered by the recycling process. Thus preventing nonrenewable resources from becoming extinct. Due to the availability of resources by recycling too they may account for the decrease in cost of the equipments. – Why recycling of E-waste is costly: The recycling of E-waste is costly when compared to recycling of other matters. This is because the composition of the equipments are harmful the recycling of which should be done with extensive care in hi-tech manner with expensive tools. The recycling of E-waste requires large labor as the primary aspect of recycling them is to categories them in metals, plastic, glass, etc., for further processing. As major constituent of E-waste is circuit board the de-soldering of which requires labor? These things makes recycling of E-waste costly. – Steps to control E-waste: The major reason of E-waste is the lack of awareness about it among the consumers of the electronic equipments. The control of E-waste can be achieved by creating awareness to the consumers about the hazardous nature of the equipments on disposal while selling the products. The E-waste recycle centers should be in reach of the consumers to disclose them safely to the recycler. The produce of the electronic equipments can implement the E-waste recycle unit
GREEN COMPUTING is a doc which is made to make some awareness to this world. Even technology can be harmful when it gets older.
So GO GREEN!!! GROW INDIA!!!
"The most common commodities capable of being recovered from electronics waste are various types and grades of steel, plastic, aluminum, CRT glass and pc board. After the e-waste is shredded and separated, these commodities are given new life by being sold and distributed to producers and manufacturers located all throughout the world.
This is from an article that appeared on All Green Website: http://www.allgreenrecycling.com/blog/e-waste-recycling-process/"
A complete PPT on E-Waste.
PPT: E-waste or Electronic Waste is the inevitable by-product of a technological revolution. Driven primarily by faster, smaller and cheaper microchip technology, society is experiencing an evolution in the capability of electronic appliances and personal electronics.E-waste is the most rapidly growing waste problem in the world. It is a crisis of not quantity alone but also a crisis born from toxic ingredients, posing a threat to the occupational health as well as the environment.
Visit www.topicsforseminar.com to Download
What is E-waste? – What causes E-waste?: Rapid development of upgraded electronic equipments forces the disposal of outdated equipments. – What makes E-waste hazardous?: All electronic equipments are made up of materials, which are harmful to human and pollute the environment when exposed. The harmful materials used in the manufacture of electronic equipments are Lead, Mercury, Plastics, CFCs, Cadmium, etc. – Current status of E-waste: E-waste now a day’s forces the world experts to turn back, as it’s a rapid growing problem in the developed and developing countries to recycle it or to dispose it safely so that they don’t pose any environmental pollution or hazards. – What caused the current state of E-waste: The lack of awareness about the hazardous & polluting nature of E-waste. And the cost to recycle E-wastes. – How to control E-waste? Reduce and Recycle: When a equipment is not working it doesn’t mean that the whole equipment has spoiled but generally just one part. By trying to use the equipments as long as possible by getting it repaired at service centers helps in reducing the accumulation of E-wastes. On the other hand certain equipments have to be disposed, at that time recycling of them prevents E-waste. – How to recycle?: The recycling of E-waste is not a simple process that can be performed all were, as they deal with harmful materials, and which requires lot of stuffs. The recycle of E-waste is done in many categories according to the material out of which it is made. – Benefits of recycling E-waste: The electronic equipments are made of material or resources such as Lead, Mercury, Plastics, CFCs, Cadmium, etc., which are nonrenewable can be recovered by the recycling process. Thus preventing nonrenewable resources from becoming extinct. Due to the availability of resources by recycling too they may account for the decrease in cost of the equipments. – Why recycling of E-waste is costly: The recycling of E-waste is costly when compared to recycling of other matters. This is because the composition of the equipments are harmful the recycling of which should be done with extensive care in hi-tech manner with expensive tools. The recycling of E-waste requires large labor as the primary aspect of recycling them is to categories them in metals, plastic, glass, etc., for further processing. As major constituent of E-waste is circuit board the de-soldering of which requires labor? These things makes recycling of E-waste costly. – Steps to control E-waste: The major reason of E-waste is the lack of awareness about it among the consumers of the electronic equipments. The control of E-waste can be achieved by creating awareness to the consumers about the hazardous nature of the equipments on disposal while selling the products. The E-waste recycle centers should be in reach of the consumers to disclose them safely to the recycler. The produce of the electronic equipments can implement the E-waste recycle unit
3. "Electronic waste includes used
electronics items which are
collected for reuse, resale,
recycling, or disposal. Re-usable
Working and repairable items
and secondary scraps like:
copper, steel, plastic, etc.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13. Electronic Waste – recycling laptops,
computers and other electronic equipment.
Most electronic waste goes through a
recycling system called a WEEE (Waste
Electrical and Electronic Equipment), which
not only recycles 95-98%, by weight, of all
ewaste passed through it, but ensures that
any data left on hard drives and memories are
thoroughly destroyed too.
14.
15.
16.
17. RECYCLING CRT MONITORS
Separation of Monitor Body and
Cathode Ray Tube – firstly the front of
the monitor is removed so that the
tube can be removed from within. The
shell is then recycled along with
regular ewaste.
Size reduction process –The tubes
and screens are shredded down into
small pieces. Any glass dust created in
this process is disposed of carefully, in
an environmentally friendly way.
![ KUNAL [LEADER]
NAMAN GARG
NAMAN GUPTA
MAYUR
LAKSHAY
PALAK
KHUSHBOO
JATIN
PUSHKAR](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)