E cwith scada
•Download as PPT, PDF•
0 likes•239 views
The document discusses an energy conserver product from Gloabtel Convergence Ltd. that can save up to 25% on lighting costs for road projects. It provides calculations showing that for a 100 km road project, the energy conserver can save Rs. 11.88 lakhs annually on lighting bills. The energy conserver works by optimizing voltage and current to reduce energy consumption. It is suitable for lighting and mixed loads. Additional benefits include extended equipment life, high efficiency, and quick return on investment.
Report
Share
Report
Share
Recommended
2014 PV Distribution System Modeling Workshop: Capabilities of Advanced Inver...
2014 PV Distribution System Modeling Workshop: Capabilities of Advanced Inver...Sandia National Laboratories: Energy & Climate: Renewables
2014 PV Distribution System Modeling Workshop: Capabilities of Advanced Inverter: John Berdner, EnphaseVeris Metering Guide
Veris Industries is a manufacturing company founded in 1992 in Portland, OR that specializes in energy metering and monitoring equipment. They produce a variety of sensor products for applications like tenant sub-metering, activity-based costing, performance monitoring, load shedding, and demand response. Their product lines include energy meters, power quality meters, multi-circuit monitors, and network displays.
GSM based Prepaid Electricity Meter
Full presentation on the new technology of prepaid electricity meters.
Includes detailed points like theft control and full diagram on the flow of connection from stations to prepaid meter
Hybrid Controller | Design 150KW PV with DG1:700KW
The document discusses the use of a hybrid controller in a 150kW photovoltaic system with two diesel generators of 700kVA and 500kVA capacity. It provides details on the system components, including 8 solar inverters of 20kW each for a total PV capacity of 151.2kW. Schematics show the connections of the PV grid, inverters, diesel generators and public grid to the hybrid controller and generator controllers. Guidelines are provided on sensor placement and PV penetration limits based on the load and generator sizes. The hybrid controller allows optimal control and utilization of solar power based on the load and integrates diesel generation when required.
Cesc limited
The document describes Distribution Related Engineering Asset Management System (DREAMS), an asset management software developed for CESC - Electricity Generation & Distribution Company. DREAMS integrates an asset register, maintenance management functionalities like preventive maintenance, and a dissolve gas analysis dashboard. It has led to a reduction in unplanned maintenance, fault reduction, and financial benefits for CESC. The software is scalable, capable of integration with other systems, and aims to further asset management practices.
Grid tie inverter
A grid-tie inverter converts DC power from sources like solar panels into AC power that can be synchronized to interface with the utility grid. It has a power circuit made of switches like MOSFETs or IGBTs to convert the DC, and a control circuit using pulse width modulation to generate switching signals. A grid-tie inverter must match the grid's voltage magnitude, frequency, and phase to send power into the grid in a synchronized way.
Grid Integration: Requirements for Wind Turbines
The document discusses the requirements for wind turbines and wind farms to comply with European grid codes as offshore wind power increases its contribution to the energy supply. As wind farms get larger, they must be integrated into the transmission network and behave similarly to conventional power plants. Grid code compliance regulations ensure wind farms contribute stability and respond appropriately to changes in voltage and frequency. Specific requirements addressed include operating within defined voltage and frequency ranges, providing reactive power control, engaging in active power control including ramp rate limits, and assisting with frequency control. Harmonizing grid codes across Europe will help increase wind power integration onto the grid.
ROHIT PPT - Copy
This document provides an overview of prepaid energy meters. It discusses the components and working of traditional household energy meters. Prepaid energy meters allow customers to pay for electricity before using it. The key components of prepaid meters include an EEPROM chip for storing credit, a microcontroller for managing credit usage, and a digital energy meter. Prepaid meters provide benefits to both consumers and utilities by allowing pay-as-you-go electricity payment and reducing overhead costs.
Recommended
2014 PV Distribution System Modeling Workshop: Capabilities of Advanced Inver...
2014 PV Distribution System Modeling Workshop: Capabilities of Advanced Inver...Sandia National Laboratories: Energy & Climate: Renewables
2014 PV Distribution System Modeling Workshop: Capabilities of Advanced Inverter: John Berdner, EnphaseVeris Metering Guide
Veris Industries is a manufacturing company founded in 1992 in Portland, OR that specializes in energy metering and monitoring equipment. They produce a variety of sensor products for applications like tenant sub-metering, activity-based costing, performance monitoring, load shedding, and demand response. Their product lines include energy meters, power quality meters, multi-circuit monitors, and network displays.
GSM based Prepaid Electricity Meter
Full presentation on the new technology of prepaid electricity meters.
Includes detailed points like theft control and full diagram on the flow of connection from stations to prepaid meter
Hybrid Controller | Design 150KW PV with DG1:700KW
The document discusses the use of a hybrid controller in a 150kW photovoltaic system with two diesel generators of 700kVA and 500kVA capacity. It provides details on the system components, including 8 solar inverters of 20kW each for a total PV capacity of 151.2kW. Schematics show the connections of the PV grid, inverters, diesel generators and public grid to the hybrid controller and generator controllers. Guidelines are provided on sensor placement and PV penetration limits based on the load and generator sizes. The hybrid controller allows optimal control and utilization of solar power based on the load and integrates diesel generation when required.
Cesc limited
The document describes Distribution Related Engineering Asset Management System (DREAMS), an asset management software developed for CESC - Electricity Generation & Distribution Company. DREAMS integrates an asset register, maintenance management functionalities like preventive maintenance, and a dissolve gas analysis dashboard. It has led to a reduction in unplanned maintenance, fault reduction, and financial benefits for CESC. The software is scalable, capable of integration with other systems, and aims to further asset management practices.
Grid tie inverter
A grid-tie inverter converts DC power from sources like solar panels into AC power that can be synchronized to interface with the utility grid. It has a power circuit made of switches like MOSFETs or IGBTs to convert the DC, and a control circuit using pulse width modulation to generate switching signals. A grid-tie inverter must match the grid's voltage magnitude, frequency, and phase to send power into the grid in a synchronized way.
Grid Integration: Requirements for Wind Turbines
The document discusses the requirements for wind turbines and wind farms to comply with European grid codes as offshore wind power increases its contribution to the energy supply. As wind farms get larger, they must be integrated into the transmission network and behave similarly to conventional power plants. Grid code compliance regulations ensure wind farms contribute stability and respond appropriately to changes in voltage and frequency. Specific requirements addressed include operating within defined voltage and frequency ranges, providing reactive power control, engaging in active power control including ramp rate limits, and assisting with frequency control. Harmonizing grid codes across Europe will help increase wind power integration onto the grid.
ROHIT PPT - Copy
This document provides an overview of prepaid energy meters. It discusses the components and working of traditional household energy meters. Prepaid energy meters allow customers to pay for electricity before using it. The key components of prepaid meters include an EEPROM chip for storing credit, a microcontroller for managing credit usage, and a digital energy meter. Prepaid meters provide benefits to both consumers and utilities by allowing pay-as-you-go electricity payment and reducing overhead costs.
Testing sound ppt
The document discusses an overview of a power interface unit (PIU). It describes the PIU as providing optimized power from electricity boards and diesel generators to telecom infrastructure equipment ranging from 5-40 KVA. The PIU intelligently controls air conditioners using mains power and conserves diesel generator use when mains power is absent. Key features of the PIU include protections against surges and lightning, intelligent phase selection, a wide input voltage range, independent circuit breakers for power distribution, support for 1-3 LCUs, a user-friendly display, status LEDs, and logs for the diesel generator and events.
GSM Based wireless energy meter/sanjeet-1308143
This document appears to be a project report submitted by three students for their Bachelor of Technology degree. It describes a project to create a GSM-based wireless energy meter. The report includes sections on acknowledgements, declarations, contents, and an introduction describing how the project will allow viewing energy usage and costs via cell phone. It also includes block diagrams and discussions of the hardware components used, including a digital energy meter, GSM modem, Arduino, transformer, voltage regulator, bridge rectifier, LCD display, resistors, and capacitors.
Solar plant
The document discusses the installation of a 5 kW on-grid solar power plant using a net-metering system and solar inverter. It describes the different types of solar systems based on the inverter used - on-grid, off-grid and hybrid. On-grid systems can operate without batteries or with batteries for backup. Off-grid systems include batteries for backup when the grid is down. Hybrid systems combine solar with other renewable sources like wind or generators. The document also examines the advantages of different inverter types for on-grid systems - micro, string and central, concluding that grid supportive solar PV provides economic and eco-friendly electricity production.
GSM BASED ELECTRICITY BILLING WITH TOD METERING -MINI PROJECT
This document describes a GSM-based wireless electricity billing system with time-of-day metering. The key components include an optical interface to read energy meter pulses, a microcontroller to calculate consumption and bills, an LCD display, real-time clock, and GSM modem for wireless communication. The system aims to automate electricity billing and provide benefits like more accurate billing, real-time consumption data, and customized rates compared to traditional manual billing processes. Block diagrams and PCB layouts are shown, along with a components list and estimated project schedule.
Grid Tie Solar Inverter Working
Grid Tie Systems often prove to be a bit difficult to understand for the people enthusiastic to learn about Solar. We have tried to present it in an easy to understand form with differently colored arrows showing the current flow.
For further info mail tu us at info@statconenergiaa.com
Or visit us at www.statconenergiaa.com
Basics Of Energy Matering And Fraud Detection
This document discusses basics of energy metering and fraud detection. It covers types of single-phase and three-phase energy meters, testing of meters in laboratories and at field sites, and different types of tampering in energy meters. The contents include basics of power measurement in AC circuits, types of single-phase meters like induction and electronic meters, testing routines for single-phase meters in the lab, field testing of single-phase meters, types of three-phase meters, field and lab testing of three-phase meters, common tampering methods like potential link open and current bypass, and references.
Pre paid Energy meter
This document describes a prepaid energy meter system that uses smart cards to allow customers to prepay for electricity usage. The system includes a metering unit that measures electricity consumption and communicates with a monitor unit. A smart card holds prepaid credit that is deducted as power is used. When credit runs low, the meter provides warnings. Prepaid meters offer utilities improved operational efficiencies and reduced financial risks compared to traditional post-paid systems. However, they also have higher upfront costs and equipment requirements.
Embedded energy meter
This document presents the design of a prepaid energy meter that uses a microcontroller to read energy usage from a meter and display it on an LCD. It also sends the reading to the user's phone via SMS using a GSM module. The system senses voltage and current using instrumentation amplifiers and an op-amp circuit. It is powered by an onboard supply and uses an Arduino microcontroller for processing. The project aims to enable remote automated monitoring of energy usage to reduce theft and human error.
Energy meter
An induction type energy meter works by using a movable aluminum disk mounted on a shaft. When electrical current flows through the meter, eddy currents are induced in the disk causing it to rotate. The disk's rotation is retarded by permanent magnets and its speed is proportional to the load. The amount of energy is displayed on mechanical counters coupled to the shaft. Smart energy meters offer improvements like increased accuracy, wireless data transmission, and power factor measurement using a microcontroller. They allow for remote meter reading without site visits and provide customers information about their current energy usage.
smart grid
This document discusses the transition from conventional power grids to smart grids. It outlines some limitations of conventional grids, including centralized generation, one-directional power flow, and inability to optimize transmission. Key components of smart grids are identified as distributed generation, renewable integration, communication-enabled transmission and distribution, and smart energy meters. Strategies to reduce transmission and distribution losses in India such as APDRP and RGGVY programs are also summarized. The benefits of HVDC transmission over long HVAC lines are provided.
Prepaid Energy Meter
This document describes a prepaid electricity meter project aimed at minimizing power losses in India. The project involves developing an electronic meter that monitors electricity consumption, informs users of usage via SMS, and allows for prepaid payment of bills. When the prepaid balance reaches zero, the meter will automatically cut off power to loads like bulbs. Key components include a microcontroller, LCD display, GSM module, and relays to control loads. The goal is to shift from a postpaid billing system prone to losses to a prepaid system with automatic notifications and cutoffs to reduce theft.
Energy efficient solar solutions for developing countries
The document summarizes solar power solutions for commercial office buildings and cold storage facilities in India. It discusses the problems with unreliable electricity supply and high costs, and proposes battery-based solar systems as a solution. The systems can provide uninterrupted power when the grid is down using solar energy stored in batteries. Case studies of 30kW and 140kW solar installations for an office building and cold storage are presented, outlining the technical specifications and operational conditions under different scenarios. Financial analysis shows payback periods of 5-6 years for both projects.
Gsm based energy meter reading system and load control
from this we are so get bill instantly without having man power and control loads from any where to any place by using a net work through gsm
Solar Cold Storage Solution
Presentation given at the Indian Cold Chain Show by Mr. Manoj Pande highlighting the method , need and execution of India's most successful solar cold storage.
For More Details write to us at info@statconenergiaa.com
Or visit us at www.statconenergiaa.com
Smart Energy Meter
A Successful Sessional Project under the course of BUET EEE 428 (Measurement & Instrumentation Laboratory)
Renewable energy for bts (2)
The document discusses renewable energy options to power rural telecommunications networks in India. It proposes hybrid solar-wind power systems as a feasible solution. Key points:
1) Rural areas often lack reliable electricity, forcing telecom providers to use expensive diesel generators. Renewable systems could provide clean, affordable power.
2) A hybrid solar-wind system is proposed, using solar panels, small wind turbines, batteries, and backup generators. For a typical 2KW rural site, a 17KW solar system is suggested.
3) Larger 6KW sites could use a 25KW solar system with wind turbines and operate generators for 7 hours daily. The hybrid systems are designed to minimize generator use and provide stable 48V
Jps will smart grid investments prevent blackouts
A question paper raising thought about investments and whether they will be able to prevent widescale blackouts in Jamaica
Power factor solution,presentation
POWER FACTOR SOLUTION provides reactive power compensation and harmonic suppression products and services to improve power quality and reduce energy costs for various industries. It collaborates with Claritas Power System Solution, Kokban Automation, and Greenovative Energy Solutions to offer a range of products including capacitors, harmonic filters, substation automation, lighting controls, and electrical panels. The document provides an overview of power factor improvement and harmonic suppression benefits, case studies demonstrating cost savings and reliability improvements for clients, and photos of industries served.
Low cost ppt final
Is a seminar based on the concept of replacing the existing electricity metering system using in developing countries by a low cost energy meter working without human intervention. Its main components are discussed later...
Prepayment Metering System
The document discusses Bangladesh's prepaid electricity metering system. It provides an overview of prepaid meter technologies, how the system works for purchasing electricity, objectives of the project including improved budgeting and convenience for customers. It also summarizes the results of implementing prepaid meters in several areas which led to reductions in losses and improvements in revenue collection and customer satisfaction.
Electric cars
Electric cars provide environmental benefits over gasoline-powered vehicles. They do not have internal combustion engines and instead use batteries to power electric motors, avoiding exhaust emissions like carbon monoxide, nitrogen oxides, and particulates. While electric cars pull energy from the power grid, which may or may not involve fossil fuels, they can still have less of a negative environmental impact than gasoline vehicles since they do not directly emit pollutants from their operation.
CT design aspects - Nageswar-6
This document discusses various protection schemes and current transformer design requirements to support them. It covers overcurrent, unit, differential, and distance protection. It describes high and low impedance differential protection and the differences in their current transformer requirements. Key factors discussed are current transformer knee point voltage, ratio, burden, and saturation performance for different applications like busbar, generator, and line protection.
More Related Content
What's hot
Testing sound ppt
The document discusses an overview of a power interface unit (PIU). It describes the PIU as providing optimized power from electricity boards and diesel generators to telecom infrastructure equipment ranging from 5-40 KVA. The PIU intelligently controls air conditioners using mains power and conserves diesel generator use when mains power is absent. Key features of the PIU include protections against surges and lightning, intelligent phase selection, a wide input voltage range, independent circuit breakers for power distribution, support for 1-3 LCUs, a user-friendly display, status LEDs, and logs for the diesel generator and events.
GSM Based wireless energy meter/sanjeet-1308143
This document appears to be a project report submitted by three students for their Bachelor of Technology degree. It describes a project to create a GSM-based wireless energy meter. The report includes sections on acknowledgements, declarations, contents, and an introduction describing how the project will allow viewing energy usage and costs via cell phone. It also includes block diagrams and discussions of the hardware components used, including a digital energy meter, GSM modem, Arduino, transformer, voltage regulator, bridge rectifier, LCD display, resistors, and capacitors.
Solar plant
The document discusses the installation of a 5 kW on-grid solar power plant using a net-metering system and solar inverter. It describes the different types of solar systems based on the inverter used - on-grid, off-grid and hybrid. On-grid systems can operate without batteries or with batteries for backup. Off-grid systems include batteries for backup when the grid is down. Hybrid systems combine solar with other renewable sources like wind or generators. The document also examines the advantages of different inverter types for on-grid systems - micro, string and central, concluding that grid supportive solar PV provides economic and eco-friendly electricity production.
GSM BASED ELECTRICITY BILLING WITH TOD METERING -MINI PROJECT
This document describes a GSM-based wireless electricity billing system with time-of-day metering. The key components include an optical interface to read energy meter pulses, a microcontroller to calculate consumption and bills, an LCD display, real-time clock, and GSM modem for wireless communication. The system aims to automate electricity billing and provide benefits like more accurate billing, real-time consumption data, and customized rates compared to traditional manual billing processes. Block diagrams and PCB layouts are shown, along with a components list and estimated project schedule.
Grid Tie Solar Inverter Working
Grid Tie Systems often prove to be a bit difficult to understand for the people enthusiastic to learn about Solar. We have tried to present it in an easy to understand form with differently colored arrows showing the current flow.
For further info mail tu us at info@statconenergiaa.com
Or visit us at www.statconenergiaa.com
Basics Of Energy Matering And Fraud Detection
This document discusses basics of energy metering and fraud detection. It covers types of single-phase and three-phase energy meters, testing of meters in laboratories and at field sites, and different types of tampering in energy meters. The contents include basics of power measurement in AC circuits, types of single-phase meters like induction and electronic meters, testing routines for single-phase meters in the lab, field testing of single-phase meters, types of three-phase meters, field and lab testing of three-phase meters, common tampering methods like potential link open and current bypass, and references.
Pre paid Energy meter
This document describes a prepaid energy meter system that uses smart cards to allow customers to prepay for electricity usage. The system includes a metering unit that measures electricity consumption and communicates with a monitor unit. A smart card holds prepaid credit that is deducted as power is used. When credit runs low, the meter provides warnings. Prepaid meters offer utilities improved operational efficiencies and reduced financial risks compared to traditional post-paid systems. However, they also have higher upfront costs and equipment requirements.
Embedded energy meter
This document presents the design of a prepaid energy meter that uses a microcontroller to read energy usage from a meter and display it on an LCD. It also sends the reading to the user's phone via SMS using a GSM module. The system senses voltage and current using instrumentation amplifiers and an op-amp circuit. It is powered by an onboard supply and uses an Arduino microcontroller for processing. The project aims to enable remote automated monitoring of energy usage to reduce theft and human error.
Energy meter
An induction type energy meter works by using a movable aluminum disk mounted on a shaft. When electrical current flows through the meter, eddy currents are induced in the disk causing it to rotate. The disk's rotation is retarded by permanent magnets and its speed is proportional to the load. The amount of energy is displayed on mechanical counters coupled to the shaft. Smart energy meters offer improvements like increased accuracy, wireless data transmission, and power factor measurement using a microcontroller. They allow for remote meter reading without site visits and provide customers information about their current energy usage.
smart grid
This document discusses the transition from conventional power grids to smart grids. It outlines some limitations of conventional grids, including centralized generation, one-directional power flow, and inability to optimize transmission. Key components of smart grids are identified as distributed generation, renewable integration, communication-enabled transmission and distribution, and smart energy meters. Strategies to reduce transmission and distribution losses in India such as APDRP and RGGVY programs are also summarized. The benefits of HVDC transmission over long HVAC lines are provided.
Prepaid Energy Meter
This document describes a prepaid electricity meter project aimed at minimizing power losses in India. The project involves developing an electronic meter that monitors electricity consumption, informs users of usage via SMS, and allows for prepaid payment of bills. When the prepaid balance reaches zero, the meter will automatically cut off power to loads like bulbs. Key components include a microcontroller, LCD display, GSM module, and relays to control loads. The goal is to shift from a postpaid billing system prone to losses to a prepaid system with automatic notifications and cutoffs to reduce theft.
Energy efficient solar solutions for developing countries
The document summarizes solar power solutions for commercial office buildings and cold storage facilities in India. It discusses the problems with unreliable electricity supply and high costs, and proposes battery-based solar systems as a solution. The systems can provide uninterrupted power when the grid is down using solar energy stored in batteries. Case studies of 30kW and 140kW solar installations for an office building and cold storage are presented, outlining the technical specifications and operational conditions under different scenarios. Financial analysis shows payback periods of 5-6 years for both projects.
Gsm based energy meter reading system and load control
from this we are so get bill instantly without having man power and control loads from any where to any place by using a net work through gsm
Solar Cold Storage Solution
Presentation given at the Indian Cold Chain Show by Mr. Manoj Pande highlighting the method , need and execution of India's most successful solar cold storage.
For More Details write to us at info@statconenergiaa.com
Or visit us at www.statconenergiaa.com
Smart Energy Meter
A Successful Sessional Project under the course of BUET EEE 428 (Measurement & Instrumentation Laboratory)
Renewable energy for bts (2)
The document discusses renewable energy options to power rural telecommunications networks in India. It proposes hybrid solar-wind power systems as a feasible solution. Key points:
1) Rural areas often lack reliable electricity, forcing telecom providers to use expensive diesel generators. Renewable systems could provide clean, affordable power.
2) A hybrid solar-wind system is proposed, using solar panels, small wind turbines, batteries, and backup generators. For a typical 2KW rural site, a 17KW solar system is suggested.
3) Larger 6KW sites could use a 25KW solar system with wind turbines and operate generators for 7 hours daily. The hybrid systems are designed to minimize generator use and provide stable 48V
Jps will smart grid investments prevent blackouts
A question paper raising thought about investments and whether they will be able to prevent widescale blackouts in Jamaica
Power factor solution,presentation
POWER FACTOR SOLUTION provides reactive power compensation and harmonic suppression products and services to improve power quality and reduce energy costs for various industries. It collaborates with Claritas Power System Solution, Kokban Automation, and Greenovative Energy Solutions to offer a range of products including capacitors, harmonic filters, substation automation, lighting controls, and electrical panels. The document provides an overview of power factor improvement and harmonic suppression benefits, case studies demonstrating cost savings and reliability improvements for clients, and photos of industries served.
Low cost ppt final
Is a seminar based on the concept of replacing the existing electricity metering system using in developing countries by a low cost energy meter working without human intervention. Its main components are discussed later...
Prepayment Metering System
The document discusses Bangladesh's prepaid electricity metering system. It provides an overview of prepaid meter technologies, how the system works for purchasing electricity, objectives of the project including improved budgeting and convenience for customers. It also summarizes the results of implementing prepaid meters in several areas which led to reductions in losses and improvements in revenue collection and customer satisfaction.
What's hot (20)
GSM BASED ELECTRICITY BILLING WITH TOD METERING -MINI PROJECT
GSM BASED ELECTRICITY BILLING WITH TOD METERING -MINI PROJECT
Energy efficient solar solutions for developing countries
Energy efficient solar solutions for developing countries
Gsm based energy meter reading system and load control
Gsm based energy meter reading system and load control
Viewers also liked
Electric cars
Electric cars provide environmental benefits over gasoline-powered vehicles. They do not have internal combustion engines and instead use batteries to power electric motors, avoiding exhaust emissions like carbon monoxide, nitrogen oxides, and particulates. While electric cars pull energy from the power grid, which may or may not involve fossil fuels, they can still have less of a negative environmental impact than gasoline vehicles since they do not directly emit pollutants from their operation.
CT design aspects - Nageswar-6
This document discusses various protection schemes and current transformer design requirements to support them. It covers overcurrent, unit, differential, and distance protection. It describes high and low impedance differential protection and the differences in their current transformer requirements. Key factors discussed are current transformer knee point voltage, ratio, burden, and saturation performance for different applications like busbar, generator, and line protection.
Instrument Transformer (ALIV - BANGLADESH)
This document discusses instrument transformers used in power systems. It describes current transformers (CT) and potential transformers (PT). CTs reduce high currents to lower, safer values for measurement. They have a primary winding connected in series with the power circuit. PTs provide isolation from high voltages and reduce voltages to safer levels for equipment. The document outlines the design, function, construction and accuracy of both transformer types, as well as sources of errors in PTs. It was produced by a group for an class project on instrument transformers.
Generator protection calculations settings
Voltages and currents present at the generator's rated voltage and current are provided as examples. Sample relay setting calculations are shown for generator protection elements including 59N neutral overvoltage, 27TN third harmonic undervoltage, 46 negative sequence overcurrent, and coordination between protective devices. Formulas for calculating voltage and current settings from generator nameplate data are demonstrated.
NOTE MATH FORM 3 - 15 trigonometry
The document is about trigonometry and includes:
1. An introduction to trigonometry defining opposite, adjacent, and hypotenuse sides of a right triangle.
2. Exercises labeling the sides of example triangles and defining the trigonometric functions sine, cosine, and tangent.
3. More exercises calculating trigonometric functions based on given side lengths of triangles.
4. Examples solving for unknown side lengths using trigonometric functions.
The document was written by Airil Bin Ahmad and covers basic trigonometry concepts and applications to right triangles.
Rs232 485 fundamental
RS-232 is a popular communications interface for connecting modems and data acquisition devices (i.e. GPS receivers, electronic balances, data loggers, ...) to computers.
RS 232
RS-232 is a standard for serial communication introduced in 1962. It defines the electrical characteristics for serial communication between computers and related devices. While it allowed for asynchronous and synchronous transmission, it had limitations including lower transmission speeds, large voltage signals, and multi-drop connections not being defined. The standard uses various pins and handshaking signals to coordinate data transfer between devices classified as DTE (data terminal equipment) or DCE (data communication equipment).
Current transformer requirements for protection 1
The document discusses current transformer requirements for protection applications. It provides information on current transformer functions, construction, standards, theory of operation, and characteristics. Protection current transformers are designed to operate over a wide range of currents, while measurement current transformers have more tightly defined accuracy limits and require low saturation levels to protect instruments.
protection and relay scheme
Protective relays are used to isolate faults in electrical systems and protect equipment from damage. There are different types of relays including electromagnetic, solid-state, and microprocessor-based relays. Relays are used for motor protection including overload protection, locked rotor protection, and single phase/unbalance protection. Transformer protection includes gas and temperature monitoring as well as differential and ground fault protection. Generator protection includes differential, ground fault, and negative sequence protection to prevent phase unbalancing.
PDCA Cycle
The PDCA cycle is a four-stage model for continuous improvement comprising plan, do, check, act. It was originally developed by Walter Shewhart and promoted by W. Edwards Deming. The cycle emphasizes careful planning, effective action, and continuous improvement through repetition of the cycle. Users follow each stage - planning improvements, implementing small tests of change, evaluating results, and implementing successful changes more broadly.
PDCA
This document provides an overview of the PDCA (Plan-Do-Check-Act) problem solving cycle and techniques that can be used within each step of the cycle. It describes the origins of PDCA in Deming's work helping Japanese industries rebuild after World War II. Key steps are outlined for each phase of the cycle, including defining the problem, analyzing data, developing and implementing solutions, and standardizing successful processes. Fourteen techniques are also introduced that can aid various stages of the problem solving process.
Substation overview
This document provides an overview of electrical substations, including their classification, components, and specifications. It discusses the different types of substations based on voltage levels, configuration, and application. It also describes the primary functions and components of outdoor switchyards, including incoming and outgoing lines, transformers, circuit breakers, and earthing systems. Clearance requirements and specifications for indoor electrical panels, busbars, grounding, and cabling are also outlined.
Viewers also liked (12)
Similar to E cwith scada
Ec
The document discusses energy and cost savings from using an Energy Conserver device for lighting loads on highways and other infrastructure projects. It claims the device can save up to 25% on lighting bills, estimating savings of Rs. 11.88 lakhs annually for every 100km of road. The Energy Conserver works by optimizing voltage and current to minimize energy consumption. It extends equipment life, improves power factor, and provides maintenance-free operation for over 20 years.
In power point description and application
The document describes a product called the Module-Optimizer ECOD, which allows optimization of voltage within international quality standards to save up to 10% on energy consumption. It monitors input and output power quality, measures consumption over time, and operates on three phases simultaneously. It increases equipment lifetime, is not sensitive to instantaneous loads, and has a large display. Its goals are to regulate voltage without harmonics while meeting output standards and improving efficiency for motors and reactive loads. It provides savings of 10% or more and is lightweight, durable, easy to install and monitor remotely, with quick repair and ROI. It works by efficiently regulating voltage without interrupting the circuit or distorting waves, and switching in under 20ms. Implementation examples provided
Subtech profile
This document discusses various electrical automation products and solutions provided by SUBTECH, including water level control systems, fire protection panels, power backup solutions, street light control panels, distribution panels, automatic power factor correction panels, automatic phase sequence panels, automatic mains failure panels, automatic changeover panels, submersible panels, battery chargers, and LED lighting solutions. Key features highlighted for each product include microprocessor control, modular design, powder coated enclosures, overload protection, energy saving capabilities, and the use of pre-magnetic contactors.
Off grid rooftop pv – elsol solar
The document discusses off-grid rooftop PV as an alternative to India's unreliable central grid. It notes India's growing power deficits and shortfalls in capacity additions. Off-grid rooftop PV is presented as a solution that reduces reliance on the grid, transmission losses, and pollution from diesel generators. Key advantages of off-grid over grid-tied systems are also summarized. The document promotes off-grid rooftop PV for non-electrified villages and concludes that rooftop PV growth is inevitable given India's worsening power crisis.
DIESEL GENERATOR AND ONLINE UPS By Accurate Power Systems
(www.indiamart.com/accuratepowersystems) We Accurate Power Systems are a leading Trader and Distributor of a wide range of Diesel Generator, Online UPS, Servo Voltage Stabilizer, Lighting Tower, Industrial Transformers, Compact Substation, etc.
Voltage stabilizer
We are manufacture the Electrical product in India which have more specific quality of products and price.
Smart optimizer ecod description and application (in power point)
Smart – Optimizer “ECOD” Feigin Electric Co., Ltd., Thailand implements 6 functions in a single unit
Optimization of energy consumption
Power factor correction
Harmonic filtering
Balancing phases
Limit the maximum inrush current
Solving problems with short-term voltage drops
Lightning protection
Improving the quality of electric power by using Smart – Optimizer “ECOD” Feigin Electric Co., Ltd., provides several advantages, including:
Minimize the typical system losses
Increase the efficiency of the energy system
Reduced maintenance costs for equipment
Increased reliability of electrical equipment
Providing the possibility of increasing the number of powered devices.
ANY ELECTRIC ENERGY SYSTEM CONSISTS OF THREE MAIN STAGES
Maximum reduction of voltage on the level of ultimate consumers, allowed by the Standard, at 0,4 kV will lead (2) to the reduction of current values in feed lines up to (1) the sources producing electric energy – generators at power stations. The reduction of currents will lead to the reduction of losses.
The level of losses will decrease, first of all, at the stage (2) of energy transfer. The physical manifestation of it will be the decrease in energy deficit value. This factor will dramatically influence the performance stability of the generating segment (1) of electric energy networks: will increase the reliability of its parameters, the operational stability of generators.
Direct and feedback links in the electric energy system are obvious.
In the result of mass usage of normalization technology based on the patents the total energy saving effect in the whole electric energy network can reach 30 % and more.
The key to achieving the described effect is the mass usage of the
Feign Electric optimization technology
Module optimizer ECOD - Best Solution for optimization energy consumption!
Module - Optimizer "ECOD" Feigin Electric Co., Ltd., Thailand implements 6 functions in a single unit
• Optimization of energy consumption
• Power factor correction
• Harmonic filtering
• Balancing phases
• Limit the maximum inrush current
• Solving problems with short-term voltage drops
• Lightning protection
Improving the quality of electric power by using Module - Optimizer "ECOD" Feigin Electric Co., Ltd., provides several advantages, including:
• Minimize the typical system losses
• Increase the efficiency of the energy system
• Reduced maintenance costs for equipment
• Increased reliability of electrical equipment
• Providing the possibility of increasing the number of powered devices.
StartOff ACCL [Automatic Source Changeover cum Current Limiter
StartOff ACCL Series are designed to connect mains supply to load till mains is present. On mains failure and receiving generator power, it connects the load to DG supply. During DG operation, load drawn is monitored. If the load exceeds the allotted limit, it disrupts the supply and rechecks in intervals. On reducing the load and keeping it within the limit, load is connected to DG supply. For different applications, we have
specific models. They are with load limiter, without load limiter, transfer of load from one phase to other phase and many additional functions.
Vsquare Automation And Controls
We Provide wide range of energy saving solution provider & material suppliers.
SOLAR, WIND, AUTOMATION AND WAST HEAT RECOVERY SYSTEMS
PATENTED AND PROVEN ENERGY OPTIMIZATION SYSTEM WITH 8-12 % IMMEDIATE ENER...
The transition to a sustainable future starts with energy efficiency. Our product – Smart-Optimizer ECOD – is a proven, patented and scalable system for energy optimization. With a fast payoff time, normally 12-24 months, and electricity savings in the range of 8-12 %; ECOD is a simultaneously profitable and scalable product.
ECOD is keeping the power at the minimum of tolerance range, reduces harmonic distortion, and reduces reactive power. The end-result is an innovative, yet highly effective, system to optimize and save on the electricity consumption.
ECOD’s patented technology – proven effective by numerous successful installations – controls the voltage to the actual loads and keeps the current within optimal range for efficiency. At every moment the network will operate with the smallest possible energy consumption.
BENEFITS FROM ECOD:
Average of 8-12 % savings on the electricity bills
Pro-longs the life-span of electrical equipment
Short payoff period 12-24 months
Scalable and dynamic for property portfolios
Compatible for indoors/outdoors installations
Simple and fast installation
Completely self-sufficient
10-years warranty
Light and small, easy to find room for
Remote monitoring and analysis by app
Overvoltage protection
IRJET- Battery Management System by using PWM Charge Controller
This document describes a battery management system that uses a pulse width modulation (PWM) charge controller to regulate the charging of batteries from renewable energy sources like solar panels and wind turbines. The system aims to store excess energy generated during the day from solar panels to power loads when solar generation drops off. It uses a PWM controller to vary the duty cycle of charging to maintain a constant voltage and efficiently charge sealed lead-acid batteries based on their state of charge. The document provides details on the hardware components in the system, including solar panels, wind turbines, batteries, charge controller, and step-down transformer. It concludes that the system can be used to power loads in rural areas lacking reliable energy access while improving battery performance and efficiency through PWM
Quorum info
The document discusses QUORUMTM, an intelligent power management system that saves energy and costs for users. It monitors electricity usage and stabilizes voltage to increase efficiency and equipment lifespan. By reducing energy waste using microcontrollers and sensors, QUORUMTM can lower bills by up to 40% without affecting power needs. It is an award-winning fourth generation system that is easy to install and automatically manages electricity usage.
Wsp supermarkets e
Save on refrigeration freezers and ventilation. UST Power saves 8% to 15% on the power of your entire supermarket. When you place a UST power conditioner between the grid and your critical equipment, you can be assured that common electrical anomalies, of any intensity or duration, will be stopped and corrected within, depending on
your needs, one, two or three cycles and an efficiency of 99%. At an incomming voltage of 230V +/- 10%, the nominal output voltage can be set to 215V +/- 1%.
Energy Conservation Report
This document summarizes an energy conservation report for GTM #2. It discusses three phases of an energy conservation program: 1) Converting drives from DC to variable frequency drives (VFDs), saving 145 kW and over 65 lakh rupees annually. 2) Establishing a new 4 MW substation to address voltage drop and capacity issues, saving over 9 million rupees annually. 3) Installing VFDs on circulation fans, estimated to save 39.6 kW on RD-V fans alone, saving over 62 lakh rupees annually. Overall the report outlines measures taken to improve efficiency and reduce electricity consumption and costs at GTM #2.
Flyer 4 page
POWER-CEOTM is an advanced power factor correction technology that uses dynamic capacitance to optimize power factor and savings at the load level, rather than just at the service entrance. It can be installed behind existing service entrance units to achieve additional savings. By correcting power factor "at load" rather than just at the service entrance, POWER-CEOTM reduces line losses between the meter and load, lowering demand charges and energy usage. It intelligently adjusts capacitance on each phase independently and precisely to maintain near-perfect power factor without over-correction or harmonic issues.
IRJET - MPPT based Photovoltaic System with Zeta Converter for DC Load
This document presents a proposed photovoltaic system with MPPT and a Zeta converter to improve efficiency. The system aims to maximize solar panel power output using an MPPT technique and regulate the output voltage with a Zeta converter. The Zeta converter is chosen because it maintains the same polarity for both voltage and current compared to other converters. The proposed system is simulated in MATLAB Simulink and results show that it reduces voltage and current ripple at the output compared to an open loop system without MPPT or converter regulation. The system improves efficiency by tracking maximum power from the solar panels and maintaining a regulated output voltage with low losses.
Ornate Solar x Solar Edge
At Ornate Solar, we believe that with every solar panel and inverter that we sell, we help India move one step closer to a sustainable future.
SolarEdge is an intelligent inverter solution that is revolutionising the way power is harvested and managed in a solar photovoltaic system.
control tech brochure
This document provides information about CONTROL-TECH, an electrical and automation solutions provider established in 2005. It details CONTROL-TECH's certifications, areas of expertise including system engineering, manufacturing, and software. It highlights experience with various industrial projects ranging from 300KVA to 4MVA. The document includes descriptions of CONTROL-TECH's capabilities and offerings related to turnkey electrical projects, PLCs, SCADAs, drives, energy saving systems, and instrumentation control panels.
Similar to E cwith scada (20)
DIESEL GENERATOR AND ONLINE UPS By Accurate Power Systems
DIESEL GENERATOR AND ONLINE UPS By Accurate Power Systems
Smart optimizer ecod description and application (in power point)
Smart optimizer ecod description and application (in power point)
ANY ELECTRIC ENERGY SYSTEM CONSISTS OF THREE MAIN STAGES
ANY ELECTRIC ENERGY SYSTEM CONSISTS OF THREE MAIN STAGES
Module optimizer ECOD - Best Solution for optimization energy consumption!
Module optimizer ECOD - Best Solution for optimization energy consumption!
StartOff ACCL [Automatic Source Changeover cum Current Limiter
StartOff ACCL [Automatic Source Changeover cum Current Limiter
PATENTED AND PROVEN ENERGY OPTIMIZATION SYSTEM WITH 8-12 % IMMEDIATE ENER...
PATENTED AND PROVEN ENERGY OPTIMIZATION SYSTEM WITH 8-12 % IMMEDIATE ENER...
IRJET- Battery Management System by using PWM Charge Controller
IRJET- Battery Management System by using PWM Charge Controller
IRJET - MPPT based Photovoltaic System with Zeta Converter for DC Load
IRJET - MPPT based Photovoltaic System with Zeta Converter for DC Load
E cwith scada
- 1. Gloabtel Convergence Ltd Energy Conserver For Lighting and Mixed Loads Welcomes You
- 2. Energy Conserver Cost Calculation for 100 Km Road Project On An Average for every 100 km one needs to Light up vide Flyover or Bridge, Truck Lay Bays & Toll Plazas at least 200 Kw Of Electricity. The cost of Electricity on Average from Electricity Board costs around Rs. 5.5 per Unit whereas same Energy Cost per Unit by Diesel Generated costs around Rs. 11.50. Now If one uses our Energy Conserver they are able to Save their lighting bill upto 25%. On An Average considering above facts For every 100 Km of NHAI BOT project the cost for Lighting is Rs. 3.96 Lacs Per Month i.e. Rs. 47.52 Lacs per Annum Considering Saving @ 25% on this Cost One Can Save their Energy Bill by Rs. 0.99 Lacs Per Month i.e. Rs. 11.88 Lacs per Annum
- 5. WORKING PRINCIPLE EC is a high efficiency device, which optimizes the voltage (Static or dynamically) as the energy consumed increases in approximately square of input voltage, hence, the output energy would reach a minimum, beyond which the energy consumed will be wasted . The product works under the principle of current optimization by using a low loss impedance device in series with the electrical circuit which results in: • 15% - 25% savings in Lighting Load • 2% - 10% savings in A.C. Load • 8% - 15% savings in Mixed Load
- 6. Energy Conserver with SCADA System Panel 1 Panel 5 Panel 9 Panel 15 Panel 20 Panel 25
- 7. The Main CMU can be linked to n number of Panels which has Energy Meters with RS 485 These meters will be connected to our SCADA system which will have either GSM / GPRS technology to transfer the required datas to main CMU Main CMU Room of EC with SCADA From the main CMU you can control the panels like:- Switching On / Off In case of failure at any panel SMS to concern Engineer / Officer
- 10. Sample of Report of EC with Scada
- 11. Sample of Report of EC with Scada
- 12. Sample of Report of EC with Scada
- 13. Sample of Report of EC with Scada
- 14. Screen shot of the Software Sample of Report of EC with Scada
- 15. Energy Conserver
- 16. Morakhia Group with turnover exceeding Rs. 120 Crores launched Gloabtel Convergence Ltd in year 2000 Gloabtel is professionally managed company involved in Conservation, Security and Monitoring . Gloabtel in past 9 years of existence has served various companies as diversified as L&T Cement (Ultra Tech), Nirma Industries, Gujarat Adani Energy Ltd, Welspun Plat & Pipe division, IFFCO , GNFC, Apollo Tyres, Suzlon Energy, Mayur Cooperative Dairy, Gujarat Glass P Ltd, United Phosphorus Ltd, Birla Copper, Micro Inks Ltd, Hindalco Industries, Alok Industries Ltd, Supreme Treves , Precision Wires Ltd, ONGC, TATA Automobiles, Mahindra Hinolay Motors , Chhattisgarh Electricity Board , Raymond India, Shyam Ferro Alloys Ltd , Corporate ISPAT, Goa State Electricity Board, Gujarat Electricity Board, etc…… Offices at – USA, Middle East, Mumbai, Ahmedabad. ISO 9001:2008 certified company from DNV Veritas COMPANY PROFILE
- 17. Soliciting your patronage for our Conservation, Security & Monitoring Range of Products Gloabtel Convergence Ltd. 190- G, R K Building, Khetwadi Main Road, Mumbai-04 Maneesh Tikku M- 09320738264 email- mtikku@gloabtel.com Tel - 022- 40426440