E book - How do you recovery costs from completed energy efficiency upgrades ...Alan Richardson
Haron Robson Energy provides services related to Energy Savings Certificates (ESCs) under the NSW Energy Savings Scheme. They help clients recover costs from completed energy efficiency upgrades by:
1) Verifying the upgrade and managing documentation to prepare an ESC claim
2) Creating ESCs based on the energy savings from the upgrade
3) Trading the ESCs and paying the client the proceeds less commissions and fees.
E book - What are Energy Savings Certificates? Alan 0417238448.pptxAlan Richardson
Haron Robson Energy is an accredited provider of Energy Savings Certificates (ESCs) in New South Wales. They help clients recover costs from energy efficiency upgrades by converting future energy savings into ESCs, which are tradable certificates. Haron Robson Energy verifies upgrades, manages documentation, registers the ESCs and trades them for money, which is then paid to the client minus commissions and fees. They offer various upgrade options for clients, including lighting upgrades where energy savings from old to new lighting are calculated and converted to ESCs.
E book - Your how to guide on Energy Savings Certificates - Call Alan 04172...Alan Richardson
Haron Robson Energy is an accredited provider of Energy Savings Certificates (ESCs) in NSW. They help clients recover costs from energy efficiency upgrades by verifying upgrades, managing documentation, creating ESCs based on estimated energy savings, trading ESCs for money, and paying the money minus fees to clients. Two common upgrade options are lighting upgrades, where ESCs are created and paid immediately after installation based on wattage reductions, and whole-site upgrades where ESCs are created after a post-installation measurement period and paid as either a one-time or annual payments over 5-10 years.
Este documento define la cultura como el conjunto de prácticas e ideas compartidas por una comunidad. La cultura ciudadana se refiere a las prácticas de la comunidad que buscan lograr un bienestar colectivo y mantener un ambiente agradable. Una acción colectiva es cuando las personas cooperan para lograr un beneficio común, por lo que es importante que cada persona contribuya para alcanzar el objetivo.
Our playbook on creating Energy Savings Certificates - Call Alan 0417238448Alan Richardson
Haron Robson Energy is an accredited provider of Energy Savings Certificates (ESCs) in NSW. They help clients upgrade their energy efficiency, measure the resulting energy savings, convert those savings into ESCs which are then traded, and provide the client with an upfront payment for the certificates earned over 10 years. This allows clients to recover costs from their energy efficiency upgrades through participation in the NSW Energy Savings Scheme.
SDG&E provides energy efficiency incentives for projects that replace existing equipment with more efficient options, reducing kilowatt hour usage. Businesses with SDG&E accounts qualify. The Standard Performance Contract incentive pays 9 cents per yearly kWh saved, while the Energy Efficiency Savings Bid Program pays 8-10 cents per kWh for projects saving over 500,000 kWh annually. Applicants must submit documentation and allow pre-inspections before receiving incentives.
The document discusses incentives for reducing energy consumption in buildings. It outlines various non-carbon reasons to reduce energy use and describes different types of incentives at different stages of the building lifecycle. These incentives include corporate social responsibility, regulations, financial penalties and rewards, grants, loans, and energy performance certificates. The document also provides examples of energy saving initiatives for an office building and their costs, savings, payback periods, and eligibility for incentives.
E book - How do you recovery costs from completed energy efficiency upgrades ...Alan Richardson
Haron Robson Energy provides services related to Energy Savings Certificates (ESCs) under the NSW Energy Savings Scheme. They help clients recover costs from completed energy efficiency upgrades by:
1) Verifying the upgrade and managing documentation to prepare an ESC claim
2) Creating ESCs based on the energy savings from the upgrade
3) Trading the ESCs and paying the client the proceeds less commissions and fees.
E book - What are Energy Savings Certificates? Alan 0417238448.pptxAlan Richardson
Haron Robson Energy is an accredited provider of Energy Savings Certificates (ESCs) in New South Wales. They help clients recover costs from energy efficiency upgrades by converting future energy savings into ESCs, which are tradable certificates. Haron Robson Energy verifies upgrades, manages documentation, registers the ESCs and trades them for money, which is then paid to the client minus commissions and fees. They offer various upgrade options for clients, including lighting upgrades where energy savings from old to new lighting are calculated and converted to ESCs.
E book - Your how to guide on Energy Savings Certificates - Call Alan 04172...Alan Richardson
Haron Robson Energy is an accredited provider of Energy Savings Certificates (ESCs) in NSW. They help clients recover costs from energy efficiency upgrades by verifying upgrades, managing documentation, creating ESCs based on estimated energy savings, trading ESCs for money, and paying the money minus fees to clients. Two common upgrade options are lighting upgrades, where ESCs are created and paid immediately after installation based on wattage reductions, and whole-site upgrades where ESCs are created after a post-installation measurement period and paid as either a one-time or annual payments over 5-10 years.
Este documento define la cultura como el conjunto de prácticas e ideas compartidas por una comunidad. La cultura ciudadana se refiere a las prácticas de la comunidad que buscan lograr un bienestar colectivo y mantener un ambiente agradable. Una acción colectiva es cuando las personas cooperan para lograr un beneficio común, por lo que es importante que cada persona contribuya para alcanzar el objetivo.
Our playbook on creating Energy Savings Certificates - Call Alan 0417238448Alan Richardson
Haron Robson Energy is an accredited provider of Energy Savings Certificates (ESCs) in NSW. They help clients upgrade their energy efficiency, measure the resulting energy savings, convert those savings into ESCs which are then traded, and provide the client with an upfront payment for the certificates earned over 10 years. This allows clients to recover costs from their energy efficiency upgrades through participation in the NSW Energy Savings Scheme.
SDG&E provides energy efficiency incentives for projects that replace existing equipment with more efficient options, reducing kilowatt hour usage. Businesses with SDG&E accounts qualify. The Standard Performance Contract incentive pays 9 cents per yearly kWh saved, while the Energy Efficiency Savings Bid Program pays 8-10 cents per kWh for projects saving over 500,000 kWh annually. Applicants must submit documentation and allow pre-inspections before receiving incentives.
The document discusses incentives for reducing energy consumption in buildings. It outlines various non-carbon reasons to reduce energy use and describes different types of incentives at different stages of the building lifecycle. These incentives include corporate social responsibility, regulations, financial penalties and rewards, grants, loans, and energy performance certificates. The document also provides examples of energy saving initiatives for an office building and their costs, savings, payback periods, and eligibility for incentives.
This document provides information about Energy Automation Systems, Inc. and Arc Energy Services, Inc., who partner to provide energy savings solutions for customers. They reduce electric bills by 10-20% or more by engineering and installing technologies that capture wasted electricity. Their process involves an initial meeting, facility walk-through, site survey, engineering proposal, installation, and savings verification. Customers benefit from guaranteed savings, tax incentives, without disruption to operations and quick return on investment typically within 2-3 years.
UtiliTech is an energy consulting firm that provides bill auditing, energy procurement, and cost management services to help clients reduce their utility and telecom expenses. The document outlines UtiliTech's process of analyzing client bills and contracts, presenting savings opportunities, implementing changes, and monitoring ongoing savings. It notes that UtiliTech has identified over $80 million in refunds and savings for over 2,500 clients across various industries since 1991.
The document provides information about a company called Energise that offers energy management and carbon reduction services. It discusses Energise's pathway to achieving net zero carbon emissions, which involves reducing energy use, generating renewable energy, and offsetting remaining emissions. It also describes Energise's energy management index that benchmarks clients' performance, Energise's turnkey solution that can deliver full compliance, control, analysis, and savings, and their offerings in areas like compliance, monitoring, analytics, energy surveys, and simplified financing options.
UtiliTech is a private company founded in 1991 that specializes in bill audit services, energy procurement, supply and management services, and consulting to help clients reduce costs. They have performed audits for over 3,000 clients, analyzing over $1 billion in utility bills. Their audits have identified over $100 million in refunds and savings opportunities, with a historical success rate of 98% of audits resulting in savings and a refund rate of 54% realizing over 10% in annual savings. UtiliTech employs a transparent process of data collection, analysis, findings presentation, implementation, and monitoring to deliver verified savings for their diverse client base in the healthcare, education, manufacturing, and government sectors.
AlveCor Energy Solutions Referral Programjcorbier1
AlveCor Energy Solutions offers High-Yield Energy Savings Solutions for large electric purchasers. If you want to save a minimum of 8% per year on your electric costs and earn a GUARANTEED minimum of 33% annual interest on your investment, contact us. We'll conduct an initial evaluation of your situation for free and tell you if you qualify.
Much like capital plans and building condition assessments, Energy Audits and Energy Management Plans are becoming essential tools for building owners to evaluate, plan, prioritize, and implement projects that impact capital and operating budgets.
The Save On Energy Audit Funding Program helps owners capitalize on incentives to better understand energy use in buildings and to identify opportunities to reduce energy costs whether it’s through equipment replacement, optimizing the operation of existing equipment, or improving operational practices.
This event will highlight what audit incentive programs are available and provide some tips for getting the most value out of the audit process. Industry experts will be on hand to answer your questions.
This document summarizes an energy efficiency financing program that offers LED lighting and solar PV installations with no upfront costs. The program involves completing an application, conducting an energy assessment survey, developing a cost savings proposal, installing the equipment, and realizing long-term energy bill savings and income from energy generated by solar that pays for the financing over time. The installations can reduce electricity bills by over 50% through significant savings from LED lighting retrofits and solar power generation.
Das energy efficiency financing presentationMark Pymm
This document summarizes an energy efficiency financing program that offers LED lighting and solar PV installations with no upfront costs. The program involves completing an application, conducting an energy assessment survey, developing a cost savings proposal, installing the equipment, and realizing long-term energy bill savings and income from energy generated by solar that pays for the financing over time. Benefits include 50%+ savings on electricity bills and owning the equipment after the agreement.
Low Carbon Energy Brochure - Capability Statement.PDFJason Roberts
This document provides information on Mitie's low carbon energy services. It discusses energy assessments, audits, and reports that Mitie can provide to help clients understand their energy usage and identify opportunities to reduce consumption and costs. These include ESOS assessments, DEC certificates, carbon footprint analysis, and air conditioning inspections. Case studies are presented showing how Mitie has assisted organizations like a financial institution and the Ministry of Justice in achieving their energy and sustainability goals through ongoing assessment and reporting programs.
FMP Event - Two energy acronyms that are affecting business properties - Alex...Global Business Intel
This document discusses two UK energy regulations that affect business properties: ESOS and MEES. ESOS requires large companies to conduct energy audits and assessments, with penalties for noncompliance. MEES establishes minimum energy efficiency standards for commercial properties, fining landlords who rent out non-compliant properties from 2018. The document also covers proposals in HM Treasury's energy efficiency tax consultation and recommendations for improving properties to meet these requirements.
This document summarizes a meeting about the Carbon Reduction Commitment (CRC) program for landlords and tenants. The meeting included introductory remarks, presentations from guest speakers on managing CRC data and opportunities for stakeholders under CRC, and concluded with a networking session over drinks. Key topics discussed included the importance of designating one person to manage CRC data, using energy use data to identify and implement reduction opportunities, and the potential for CRC to encourage landlords and tenants to work together to lower energy consumption and costs.
Mitie is one of the largest low carbon consultancies in the UK and provides energy certification services to over 200 clients. The Energy Performance of Buildings Directive requires that businesses and public buildings obtain energy certificates and comply with energy efficiency criteria. Properties must have an Energy Performance Certificate when constructed, sold, or let, and larger publicly accessible buildings must display their Display Energy Certificate. Air conditioning systems over 12kW also must be regularly inspected. The Directive aims to improve building energy efficiency and reduce emissions through transparency of energy performance certification.
The Role of Incentives in Advancing Energy Efficiency InitiativesAnne Patenaude
Driving down energy costs through energy efficiency improvements is a key strategy for building owners & managers focused on increasing net operating income. Whether you drivers are lowering utilities, reducing GHG emissions, satisfying a sustainability initiative, or emulating best practices, your investments in energy efficiency will benefit your clients, tenants, and the environment.
The Independent Electricity System Operator recently announced a new six year conservation first framework (CFF) with an objective of reducing electricity consumption by 400 million kilowatt-hours in Hydro Ottawa territory by December 31, 2020 – that’s equivalent to removing about 100 commercial office towers in the downtown core off the grid. Achieving this target means that Building Owners and Managers will receive about $75,000,000 in incentive funding over six years to make investments in energy efficiency -projects more financially attractive.
Macquarie now offers specialised finance for energy efficient lighting upgrades. Switching to LED lighting can save clients money on energy bills within 2 years and may improve building energy performance certificate ratings. Financing a lighting upgrade allows clients to match cash outflows with operating cost savings without paying the upfront capital costs. Standard rental agreements are available with tenors up to 5 years and pricing available upon request. The application process is similar to other equipment finance and involves accrediting installers and manufacturers. Applications from leasing properties are also accepted with landlord consent.
This document provides an overview of energy services offered by GET Solutions including: energy procurement to reduce customer costs by 30-40% through market testing and negotiations; site operations for cost-effective utility management; data management for reporting, benchmarking, and identifying savings; carbon management and compliance services; and energy services like monitoring and targeting software to resolve waste immediately. GET has over 200 agents, 21,000 customers, and helped retrieve £4 million in billing errors in 2010. The goal is to turn energy challenges into savings opportunities through an integrated approach along the energy journey.
GET Solutions provides an end-to-end energy management service including energy procurement, site operations, data management, carbon reduction, and compliance. Their services aim to reduce customers' energy costs by 30-40% through competitive procurement, bill validation rebates of 3-5%, and additional energy management savings of 8-10%. GET has over 200 agents, 21,000 customers, and £1.2 billion in annual energy procurement. Their full-service approach and proven track record of successful delivery creates strategic alignment to help customers meet energy, environmental, and cost reduction targets.
The document discusses various US federal tax incentives for renewable energy and energy efficiency, including deductions, credits, grants and rebates. It describes Section 179D deduction for energy efficient commercial buildings, Section 48 investment tax credit for renewable energy property, Section 48C advanced energy manufacturing tax credit, and other energy related tax credits.
Pat rules and obligations of d cs under pat schemeshambhupoddar1
1) The document outlines India's Perform, Achieve and Trade (PAT) Scheme established under the Energy Conservation Act of 2001 to promote energy efficiency in large energy-consuming industries.
2) It defines rules for setting energy consumption norms and standards, establishing targets, implementing efficiency plans, monitoring and verification, issuing energy savings certificates, and ensuring compliance.
3) Key phases include target setting by BEE, notification by the government, implementation by designated consumers, monitoring and verification, recommendation of energy savings certificates, and ensuring compliance.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
This document provides information about Energy Automation Systems, Inc. and Arc Energy Services, Inc., who partner to provide energy savings solutions for customers. They reduce electric bills by 10-20% or more by engineering and installing technologies that capture wasted electricity. Their process involves an initial meeting, facility walk-through, site survey, engineering proposal, installation, and savings verification. Customers benefit from guaranteed savings, tax incentives, without disruption to operations and quick return on investment typically within 2-3 years.
UtiliTech is an energy consulting firm that provides bill auditing, energy procurement, and cost management services to help clients reduce their utility and telecom expenses. The document outlines UtiliTech's process of analyzing client bills and contracts, presenting savings opportunities, implementing changes, and monitoring ongoing savings. It notes that UtiliTech has identified over $80 million in refunds and savings for over 2,500 clients across various industries since 1991.
The document provides information about a company called Energise that offers energy management and carbon reduction services. It discusses Energise's pathway to achieving net zero carbon emissions, which involves reducing energy use, generating renewable energy, and offsetting remaining emissions. It also describes Energise's energy management index that benchmarks clients' performance, Energise's turnkey solution that can deliver full compliance, control, analysis, and savings, and their offerings in areas like compliance, monitoring, analytics, energy surveys, and simplified financing options.
UtiliTech is a private company founded in 1991 that specializes in bill audit services, energy procurement, supply and management services, and consulting to help clients reduce costs. They have performed audits for over 3,000 clients, analyzing over $1 billion in utility bills. Their audits have identified over $100 million in refunds and savings opportunities, with a historical success rate of 98% of audits resulting in savings and a refund rate of 54% realizing over 10% in annual savings. UtiliTech employs a transparent process of data collection, analysis, findings presentation, implementation, and monitoring to deliver verified savings for their diverse client base in the healthcare, education, manufacturing, and government sectors.
AlveCor Energy Solutions Referral Programjcorbier1
AlveCor Energy Solutions offers High-Yield Energy Savings Solutions for large electric purchasers. If you want to save a minimum of 8% per year on your electric costs and earn a GUARANTEED minimum of 33% annual interest on your investment, contact us. We'll conduct an initial evaluation of your situation for free and tell you if you qualify.
Much like capital plans and building condition assessments, Energy Audits and Energy Management Plans are becoming essential tools for building owners to evaluate, plan, prioritize, and implement projects that impact capital and operating budgets.
The Save On Energy Audit Funding Program helps owners capitalize on incentives to better understand energy use in buildings and to identify opportunities to reduce energy costs whether it’s through equipment replacement, optimizing the operation of existing equipment, or improving operational practices.
This event will highlight what audit incentive programs are available and provide some tips for getting the most value out of the audit process. Industry experts will be on hand to answer your questions.
This document summarizes an energy efficiency financing program that offers LED lighting and solar PV installations with no upfront costs. The program involves completing an application, conducting an energy assessment survey, developing a cost savings proposal, installing the equipment, and realizing long-term energy bill savings and income from energy generated by solar that pays for the financing over time. The installations can reduce electricity bills by over 50% through significant savings from LED lighting retrofits and solar power generation.
Das energy efficiency financing presentationMark Pymm
This document summarizes an energy efficiency financing program that offers LED lighting and solar PV installations with no upfront costs. The program involves completing an application, conducting an energy assessment survey, developing a cost savings proposal, installing the equipment, and realizing long-term energy bill savings and income from energy generated by solar that pays for the financing over time. Benefits include 50%+ savings on electricity bills and owning the equipment after the agreement.
Low Carbon Energy Brochure - Capability Statement.PDFJason Roberts
This document provides information on Mitie's low carbon energy services. It discusses energy assessments, audits, and reports that Mitie can provide to help clients understand their energy usage and identify opportunities to reduce consumption and costs. These include ESOS assessments, DEC certificates, carbon footprint analysis, and air conditioning inspections. Case studies are presented showing how Mitie has assisted organizations like a financial institution and the Ministry of Justice in achieving their energy and sustainability goals through ongoing assessment and reporting programs.
FMP Event - Two energy acronyms that are affecting business properties - Alex...Global Business Intel
This document discusses two UK energy regulations that affect business properties: ESOS and MEES. ESOS requires large companies to conduct energy audits and assessments, with penalties for noncompliance. MEES establishes minimum energy efficiency standards for commercial properties, fining landlords who rent out non-compliant properties from 2018. The document also covers proposals in HM Treasury's energy efficiency tax consultation and recommendations for improving properties to meet these requirements.
This document summarizes a meeting about the Carbon Reduction Commitment (CRC) program for landlords and tenants. The meeting included introductory remarks, presentations from guest speakers on managing CRC data and opportunities for stakeholders under CRC, and concluded with a networking session over drinks. Key topics discussed included the importance of designating one person to manage CRC data, using energy use data to identify and implement reduction opportunities, and the potential for CRC to encourage landlords and tenants to work together to lower energy consumption and costs.
Mitie is one of the largest low carbon consultancies in the UK and provides energy certification services to over 200 clients. The Energy Performance of Buildings Directive requires that businesses and public buildings obtain energy certificates and comply with energy efficiency criteria. Properties must have an Energy Performance Certificate when constructed, sold, or let, and larger publicly accessible buildings must display their Display Energy Certificate. Air conditioning systems over 12kW also must be regularly inspected. The Directive aims to improve building energy efficiency and reduce emissions through transparency of energy performance certification.
The Role of Incentives in Advancing Energy Efficiency InitiativesAnne Patenaude
Driving down energy costs through energy efficiency improvements is a key strategy for building owners & managers focused on increasing net operating income. Whether you drivers are lowering utilities, reducing GHG emissions, satisfying a sustainability initiative, or emulating best practices, your investments in energy efficiency will benefit your clients, tenants, and the environment.
The Independent Electricity System Operator recently announced a new six year conservation first framework (CFF) with an objective of reducing electricity consumption by 400 million kilowatt-hours in Hydro Ottawa territory by December 31, 2020 – that’s equivalent to removing about 100 commercial office towers in the downtown core off the grid. Achieving this target means that Building Owners and Managers will receive about $75,000,000 in incentive funding over six years to make investments in energy efficiency -projects more financially attractive.
Macquarie now offers specialised finance for energy efficient lighting upgrades. Switching to LED lighting can save clients money on energy bills within 2 years and may improve building energy performance certificate ratings. Financing a lighting upgrade allows clients to match cash outflows with operating cost savings without paying the upfront capital costs. Standard rental agreements are available with tenors up to 5 years and pricing available upon request. The application process is similar to other equipment finance and involves accrediting installers and manufacturers. Applications from leasing properties are also accepted with landlord consent.
This document provides an overview of energy services offered by GET Solutions including: energy procurement to reduce customer costs by 30-40% through market testing and negotiations; site operations for cost-effective utility management; data management for reporting, benchmarking, and identifying savings; carbon management and compliance services; and energy services like monitoring and targeting software to resolve waste immediately. GET has over 200 agents, 21,000 customers, and helped retrieve £4 million in billing errors in 2010. The goal is to turn energy challenges into savings opportunities through an integrated approach along the energy journey.
GET Solutions provides an end-to-end energy management service including energy procurement, site operations, data management, carbon reduction, and compliance. Their services aim to reduce customers' energy costs by 30-40% through competitive procurement, bill validation rebates of 3-5%, and additional energy management savings of 8-10%. GET has over 200 agents, 21,000 customers, and £1.2 billion in annual energy procurement. Their full-service approach and proven track record of successful delivery creates strategic alignment to help customers meet energy, environmental, and cost reduction targets.
The document discusses various US federal tax incentives for renewable energy and energy efficiency, including deductions, credits, grants and rebates. It describes Section 179D deduction for energy efficient commercial buildings, Section 48 investment tax credit for renewable energy property, Section 48C advanced energy manufacturing tax credit, and other energy related tax credits.
Pat rules and obligations of d cs under pat schemeshambhupoddar1
1) The document outlines India's Perform, Achieve and Trade (PAT) Scheme established under the Energy Conservation Act of 2001 to promote energy efficiency in large energy-consuming industries.
2) It defines rules for setting energy consumption norms and standards, establishing targets, implementing efficiency plans, monitoring and verification, issuing energy savings certificates, and ensuring compliance.
3) Key phases include target setting by BEE, notification by the government, implementation by designated consumers, monitoring and verification, recommendation of energy savings certificates, and ensuring compliance.
Similar to E book - Your how to guide on Energy Savings Certificates and applying the PIAM&V methodology - Alan 0417238448 (20)
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
E book - Your how to guide on Energy Savings Certificates and applying the PIAM&V methodology - Alan 0417238448
1. þ Verify Upgrade þ Manage All Documentation & Prepare Claim þ Create ESCs þ Trade ESCs þ Pay You $
Haron Robson Energy
is Accredited by the
NSW Government to
create & trade Energy
Savings Certificates
Copyright Haron Robson Energy Pty Ltd 2015.
Haron Robson Energy is an Accredited Certificate Provider (ACP) of Energy Saving Certificates (ESCs)
Haron Robson Energy Pty Ltd, ABN 68 151 296 347, of Level 5, 37 Pitt St Sydney NSW 2000 T: (02) 7903 4567
Energy Savings Certificates
are traded and the money
($) is returned to You.
You recover costs from
energy efficiency upgrade
*Each certificate represents the equivalent of 1 tonne of
CO2-e resulting from energy savings activities.
Under The NSW Energy
Saving Scheme future energy
savings from upgrades can be
converted to
Energy Savings Certificates
An Energy Savings Certificate (ESC) is a tradable certificate created
under Division 7 of Part 9 of the Electricity Supply Act 1995.
eBook
Your how to guide on Energy
Savings Certificates and
applying the PIAM&V
methodology
What does Haron Robson Energy do? We provide rapid pain relief from a highly regulated Government scheme
2. þ Verify Upgrade þ Manage All Documentation & Prepare Claim þ Create ESCs þ Trade ESCs þ Pay You $
Haron Robson Energy
is Accredited by the
NSW Government to
create & trade Energy
Savings Certificates
Copyright Haron Robson Energy Pty Ltd 2015.
Haron Robson Energy is an Accredited Certificate Provider (ACP) of Energy Saving Certificates (ESCs)
Haron Robson Energy Pty Ltd, ABN 68 151 296 347, of Level 5, 37 Pitt St Sydney NSW 2000 T: (02) 7903 4567
Energy Savings Certificates
are traded and the money
($) is returned to You.
You recover costs from
energy efficiency upgrade
*Each certificate represents the equivalent
of 1 tonne of CO2-e resulting from energy
savings activities.
Under The NSW Energy
Saving Scheme future energy
savings from upgrades can be
converted to
Energy Savings Certificates
An Energy Savings Certificate (ESC) is a
tradable certificate created under Division 7
of Part 9 of the Electricity Supply Act 1995.
Energy
Savings
Certificates
What are Energy Savings Certificates?
= $
Haron Robson Energy
takes on all risk of
overpayment and
non-compliance
Certificates are created
from future
gas or electricity savings
What does Haron Robson Energy do? We provide rapid pain relief from a highly regulated Government scheme
Certificates
are traded
You may be eligible to
receive a forward
payment
10 years upfront
Create
&
Trade
3. þ Verify Upgrade þ Manage All Documentation & Prepare Claim þ Create ESCs þ Trade ESCs þ Pay You $
Haron Robson Energy
is Accredited by the
NSW Government to
create & trade Energy
Savings Certificates
Copyright Haron Robson Energy Pty Ltd 2015.
Haron Robson Energy is an Accredited Certificate Provider (ACP) of Energy Saving Certificates (ESCs)
Haron Robson Energy Pty Ltd, ABN 68 151 296 347, of Level 5, 37 Pitt St Sydney NSW 2000 T: (02) 7903 4567
Energy Savings Certificates
are traded and the money
($) is returned to You.
You recover costs from
energy efficiency upgrade
*Each certificate represents the equivalent
of 1 tonne of CO2-e resulting from energy
savings activities.
Under The NSW Energy
Saving Scheme future energy
savings from upgrades can be
converted to
Energy Savings Certificates
An Energy Savings Certificate (ESC) is a
tradable certificate created under Division 7
of Part 9 of the Electricity Supply Act 1995.
Energy
Savings
Certificates
What do you do with
Energy Savings Certificates?
= $
Haron Robson Energy
takes on all risk of
overpayment and
non-compliance
Certificates are created
from future
gas or electricity savings
What does Haron Robson Energy do? We provide rapid pain relief from a highly regulated Government scheme
Certificates
are traded
You may be eligible to
receive a forward
payment
10 years upfront
Create
&
Trade
4. 10 year forwar10 year forward $
payment
d $ payment
E.g. Install VSD to pumps
E.g. Gas efficiency upgrade to
stationary equipment
^ We can also apply Option No.2
to a lighting upgrade or a chiller
(replacement) upgrade
How does Haron Robson Energy create Energy Savings Certificates applying
the PIAM&V methodology?
What is calculated?
OLD lighting
equipment (Wattage)
less NEW lighting
equipment (Wattage)
= energy savings and
convert to certificates
How?
Measure energy savings from
upgrade & convert to certificates
When?
We create ESCs and You receive
$ payment after post install
measure period complete
How?
Calculate energy
savings & convert to
certificates
When?
We create ESCs and
you receive payment
immediately after
installation of upgrade
lighting equipment
What is measured?*
E.g. Motor / pump energy
consumption by sub-meter over a
period pre & post upgrade install
Option No.2^
Isolated Area or
Specific Plant Upgrade
Option No.1
Lighting &
Controls Upgrade
E.g. Multiple energy efficiency
upgrades (i.e. lighting + chiller
replacement + VSD installed to
motors / pumps + data analytics
overlay to BMS or BMS upgrade
How?
Measure energy savings from
upgrade & convert to certificates
When?
We create ESCs and You
receive $ payment after post
install measure period complete
What is measured?*
E.g. Site energy consumption by
utility (retail) meter over a period
pre & post install
Option No.3
Whole of Site
Upgrade
* If energy consumption is directly linked to production output the pre and post
measurement period may only be one week or one month maximum
Gas or Electricity Energy Efficiency Upgrades
What is measured?
Whole of site energy
consumption using utility
(retail) meter data over a
12 month (seasonal)
period pre and post
install
How?
Measure energy savings
& convert to certificates
When?
We create ESCs and
You receive payment 12
months post install
measurement period.
Annual creation ONLY
up to 5 years max.
Option No.4
Chiller (Replacement)
Upgrade
Eligible for a 10 year forward $ payment
Eligible for 5x annual
$ payment
Both use
PIAM&V
methodology
Eligible for a
10 year forward
$ payment
5. Project Impact Assessment with
Measurement & Verification
Upgradeinstalledandoperatingat
site
What is the process?
StepsTime
a. Develop
Baseline
Energy Model
b. Prepare M&V
Plan, the
“RESA
Accreditation”
in accordance
with the NSW
ESS Rule
2009
c. Obtain all
stakeholder
sign offs
Step 2
Plan & Submit
Application
a. Register
ESCS in the
GGAS
Registry
b. Confirm
ESCs in
GGAS
registry with
the Client
c. Trade ESCs
with a liable
party
d. Confirm
trade with
the Client
Step 4
Register &
Trade ESCs
a. Define
boundary
motor/pump
only. Measure
baseline
energy use
Note: Temporary
or permanent
sub-metering will
be required
enabling
measurement of
baseline energy
use
Commission
Step 1
a. Measure
operating energy
use
b. Develop
Operating
Energy Model
c. Calculate lifetime
energy savings
for ESC creation
Note: Temporary or
permanent sub-
metering will be
required enabling
measurement of
operating energy use
Step 3
Measure NEW
Operating Energy
a. Transfer money
from trade of
ESCs less: IPART
& brokerage fees
and Haron
Robson Energy
commission
Note: PIAM&V allows
forward ESC creation
for the expected
lifetime of upgrades &
additional “Top-Up”
ESC creation
permitted annually up
to 10 years
Step 5
Pay ClientMeasure
Baseline Energy
Client Yield1 – Revenue returned to the Client from ESC creation & trade è $250,0001
10 year forward
payment
$
$
1. Client Yield calculated as per Table 1 Revenue Return To The Client. This is an indicative value not the
realised value. The realised value will be determined upon trade of ESCs at a future date. A significant factor in
the realised value is the ESC Spot Price at the time of trade.
Completed
before
upgrade
Measurement
period 1 week
only or 12 mths
Measurement
period 1 week only
or 12 months
Pay client post
measurement
period
5 day minimum
Progress
Payment
Progress
Payment
Progress
Payment
Upgrade
installedand
operatingat
site
Option No.2 - Isolated Area or Specific Plant
Energy Efficiency Upgrade
6. Step 1 - Measure Baseline Energy Who completes? Fee
Measure baseline energy use to complete item 2a.
a. Client supply and install sub-metering, collection and
sending of data to HRE
OR
b. HRE supply and install sub-metering and collection of data
Haron Robson
Energy
Or
Client
POA
from
Haron
Robson
Energy
Step 2 - Plan and Submit Application Who completes? Fee
2a. HRE develop “Baseline Energy Model” using PIAM&V
tool.
Haron Robson
Energy
POA
2b. M&V Professional from Other to validate “Baseline
Energy Model” as per “Method Guide PIAM&V” and Part B of
Evidence Package.
Independent M&V
Professional
2c. HRE prepare and submit application for RESA
Accreditation.
HRE POA
Step 3 - Measure NEW Operating Energy Who completes? Fee
3a. Measure operating energy use to complete item 3b.
a. Client supply and install sub-metering, collection and
sending of data to HRE
OR
b. HRE supply and install sub-metering and collection of data
Haron Robson
Energy
Or
Client
POA
from
Haron
Robson
Energy
3b. HRE develop “Operating Energy Model” using PIAM&V
tool.
Haron Robson
Energy
POA
3c. M&V Professional from Other to validate “Operating
Energy Model” as per "Method Guide PIAM&V" and Part B
of the Evidence Package.
Independent M&V
Professional
POA
3d. HRE verifies RESA, calculate energy savings and ESCs
using PIAM&V tool, complete record keeping in accordance
with PIAM&V requirements.
Haron Robson
Energy
POA
Step 4 – Register and
Trade ESCs
Who
completes?
Fee
4b. HRE Registration of
ESCs in ESS Registry
Haron
Robson
Energy
Nil
4c. ESS ESC Registration
Fee^^
• IPART ESC
Registration Fee $0.70
per ESC registered
Haron
Robson
Energy
$0.70
per
ESC
4d. ESS Independent Audit
Fee
• HRE / ESS
Independent Audit Fee
Haron
Robson
Energy
4e. Haron Robson Energy
retains ownership of X% of
all ESCs registered
Haron
Robson
Energy
What are the deliverables?
^^ Fee as per published IPART Schedule of Fees and
subject to change
Option No.2 - Isolated Area or Specific Plant
Energy Efficiency Upgrade
Copyright Haron Robson Energy Pty Ltd 2015
Haron Robson Energy Pty Ltd, ABN 68 151 296 347, of Level 5, 37 Pitt St Sydney NSW 2000 T: (02) 7903 4567
7. Project Impact Assessment with
Measurement & Verification
upgradesinstalled&operatingatsite
What is the process?
StepsTime
a. Develop
Baseline
Energy Model
b. Prepare M&V
Plan, the
“RESA
Accreditation”
in accordance
with the NSW
ESS Rule
2009
c. Obtain all
stakeholder
sign offs
Step 2
Plan & Submit
Application
a. Register
ESCS in the
GGAS
Registry
b. Confirm
ESCs in
GGAS
registry with
the Client
c. Trade ESCs
with a liable
party
d. Confirm
trade with
the Client
Step 4
Register &
Trade ESCs
a. Define
boundary all
of site.
Measure
baseline
energy use
Commission
Step 1
a. Measure
operating energy
use
b. Develop
Operating
Energy Model
c. Calculate lifetime
energy savings
for ESC creation
Step 3
Measure NEW
Operating Energy
a. Transfer money
from trade of
ESCs less: ESC
registration &
brokerage fees
and Haron
Robson
commission
Note: PIAM&V allows
forward ESC creation
for the expected
lifetime of upgrades &
additional “Top-Up”
ESC creation
permitted annually up
to 10 years.
Step 5
Pay ClientMeasure
Baseline Energy
Client Yield1 – Revenue returned to the Client from ESC creation & trade è $550,0001
10 year forward
payment
$
$
1. Client Yield calculated as per Table 1 Revenue Return To The Client. This is an indicative value not the
realised value. The realised value will be determined upon trade of ESCs at a future date. A significant factor in
the realised value is the ESC Spot Price at the time of trade.
Completed
before upgrade
Measurement
period 1 week
only or 12 mths
Measurement
period 1 week only
or 12 months
Pay client post
measurement
period
5 day minimum
Progress
Payment Fee
Progress
Payment Fee
Progress
Payment Fee
Upgrade
installedand
operatingat
site
Option No.3 - Whole of Site
Energy Efficiency Upgrade
8. Step 1 - Measure Baseline Energy Who completes? Fee
1. Measure baseline energy use to complete item 2a.
a. Client collection of NMI data from retail energy provider
and send to HRE
OR
b. HRE arrange for collection of NMI data from retail energy
provider
Haron Robson
Energy
Or
Client
POA
from
Haron
Robson
Energy
Step 2 - Plan and Submit Application Who completes? Fee
2a. HRE develop “Baseline Energy Model” using PIAM&V
tool.
Haron Robson
Energy
POA
2b. M&V Professional from Other to validate “Baseline
Energy Model” as per “Method Guide PIAM&V” and Part B of
Evidence Package.
Independent M&V
Professional
2c. HRE prepare and submit application for RESA
Accreditation.
Haron Robson
Energy
POA
Step 3 - Measure NEW Operating Energy Who completes? Fee
3. Measure operating energy use to complete item 3b.
a. Client collection of NMI data from retail energy provider
and send to HRE
OR
b. HRE arrange for collection of NMI data from retail energy
provider
Haron Robson
Energy
Or
Client
POA
from
Haron
Robson
Energy
3b. HRE develop “Operating Energy Model” using PIAM&V
tool.
Haron Robson
Energy
POA
3c. M&V Professional from Other to validate “Operating
Energy Model” as per "Method Guide PIAM&V" and Part B
of the Evidence Package.
Independent M&V
Professional
POA
3d. HRE verifies RESA, calculate energy savings and ESCs
using PIAM&V tool, complete record keeping in accordance
with PIAM&V requirements.
Haron Robson
Energy
POA
Step 4 – Register &
Trade ESCs
Who
completes?
Fee
4b. HRE Registration of
ESCs in ESS Registry
Haron
Robson
Energy
Nil
4c. ESS ESC Registration
Fee^^
• IPART ESC
Registration Fee $0.70
per ESC registered
Haron
Robson
Energy
$0.70
per
ESC
4d. ESS Independent Audit
Fee
• HRE / ESS
Independent Audit Fee
Haron
Robson
Energy
4e. Haron Robson Energy
retains ownership of X% of
all ESCs registered
Haron
Robson
Energy
POA
What are the deliverables?
^^ Fee as per published IPART Schedule of Fees and
subject to change
Copyright Haron Robson Energy Pty Ltd 2015
Haron Robson Energy Pty Ltd, ABN 68 151 296 347, of Level 5, 37 Pitt St Sydney NSW 2000 T: (02) 7903 4567
Option No.3 - Whole of Site Energy Efficiency Upgrade
9. 10 year forwar10 year forward $
payment
d $ payment
E.g. Install VSD to pumps
E.g. Gas efficiency upgrade to
stationary equipment
^ We can also apply Option No.2
to a lighting upgrade or a chiller
(replacement) upgrade
How does Haron Robson Energy create Energy Savings Certificates using
other methodologies?
What is calculated?
OLD lighting equipment
(Wattage) less NEW
lighting equipment
(Wattage) = energy
savings and convert to
certificates
How?
Measure energy savings from
upgrade & convert to certificates
When?
We create ESCs and You receive
$ payment after post install
measure period complete
How?
Calculate energy
savings & convert to
certificates
When?
We create ESCs and
you receive payment
immediately after
installation of upgrade
lighting equipment
What is measured?*
E.g. Motor / pump energy
consumption by sub-meter over a
period pre & post upgrade install
Option No.2^
Isolated Area or
Specific Plant Upgrade
Option No.1
Lighting & Controls
Upgrade
E.g. Multiple energy efficiency
upgrades (i.e. lighting + chiller
replacement + VSD installed to
motors / pumps + data analytics
overlay to BMS or BMS upgrade
How?
Measure energy savings from
upgrade & convert to certificates
When?
We create ESCs and You
receive $ payment after post
install measure period complete
What is measured?*
E.g. Site energy consumption by
utility (retail) meter over a period
pre & post install
Option No.3
Whole of Site
Upgrade
* If energy consumption is directly linked to production output the pre and post
measurement period may only be one week or one month maximum
Gas or Electricity Energy Efficiency Upgrades
What is measured?
Whole of site energy
consumption using utility
(retail) meter data over a
12 month (seasonal)
period pre and post
install
How?
Measure energy savings
& convert to certificates
When?
We create ESCs and
You receive payment 12
months post install
measurement period.
Annual creation ONLY
up to 5 years max.
Option No.4
Chiller (Replacement)
Upgrade
Eligible for a 10 year forward $ payment Eligible for 5x annual
$ payment
Use PIAM&V
to create
ESCs
Eligible for a
10 year forward
$ payment
10. a. Confirm Nomination
Form signed before
Implementation Date.
b. Kick-off meeting and
issue Project Brief
c. Monitor & assist
d. Confirm the lighting
upgrade will comply
with the Energy
Saving Scheme Rule
e. Client option: request
HRE to verify &
document upgrade
lighting complies with
BCA and ASNZS 1680
What is the process?
a. Receive
documentation
(evidence)
Review
documentation
and stakeholder
sign-offs
b. Site visit to verify
documentation
aligns with site
works
c. Calculate energy
savings & ESCs
d. Confirm final
ESC quantity to
be registered
Step 2
Audit and Verify
ESC Claim
a. Trade
ESCs
with a
liable
party
b. Confirm
ESCs
traded
Step 4
Trade
ESCs
3 days 5 days
Step 1
Timeframe: X days
a. Register
ESCs in
the ESS
Registry
b. Confirm
ESCs
registered
and gain
approval
to trade
ESCs
Step 3
Register
ESCs
1 day
a. Transfer
money from
trade of
ESCs less
commission
and fee into
nominated
bank
account of
the Client
Step 5
Pay
Client
Nomination and Kick-
Off Meeting
Client Yield1 – revenue returned to the client è $100,0001
You
receive
No upfront payment of commission or fees
StartDescription
Fee
$
1. Client Yield calculated as per Table 1 Revenue Return To The Client, next page. This is an indicative value not the realised value.
The realised value will be determined upon trade of ESCs
2. Commission as per Table 2, next page “The Breakdown”
3. Other Fees as Agreed as per Table 3, next page “The Breakdown”
Option No.1 - Lighting Energy Efficiency Upgrade
Lightinginstalledandoperatingatsite
10 year
forward
payment
Commission2 & Other Fees As Agreed3
deducted from Net Revenue
11. What are the
deliverables?
What is calculated?
OLD lighting equipment
(Wattage) less NEW
lighting equipment
(Wattage) = energy
savings and convert to
certificates
How?
Calculate energy
savings and convert to
certificates
using commercial
lighting methodology
When?
We create ESCs and
you receive payment
immediately after
installation and
operation of upgrade
lighting equipment
Lighting
Upgrade
Both
packages
allow for 10
year
forward
creation of
energy
savings.
Energy
savings are
converted
to Energy
Savings
Certificates
Energy
Savings
Certificates
are traded
for revenue
($)
Revenue
($)
is returned
to You.
$
*** The Client can request Haron Robson Energy to document and verify the upgrade lighting complies with the Building Code of Australia (BCA) and
AS/NZS 1680. Alternatively, the Client can engage Haron Robson to prepare a lighting design to comply with the BCA and AS/NZS 1680
Deliverable By whom Deliverable By whom
Prepare existing and upgrade lighting
plans; and take photos of existing
luminaires in accordance with
Schedule 1
Client
Complete lighting register, prepare
existing and upgrade lighting plans;
and take photos of existing luminaires
in accordance with Schedule 1
HRE
Fixed
Fee
Prepare scope of works and
contractor specifications Client
Prepare scope of works and
contractor specifications
HRE
Fixed
Fee
Complete lighting design to comply
with the Building Code of Australia
and ASNZS 1680
Client
Complete lighting design to comply
with the Building Code of Australia
and ASNZS 1680
HRE
Fixed
Fee
Project manage the supply, install
and commissioning of upgrade
lighting
Client
Project manage the supply, install
and commissioning of upgrade
lighting
HRE
Fixed
Fee
Manage and coordinate all ESC
documentation (evidence)
requirements in accordance with
IPART Evidence Pack & Schedule 1
Client
Manage and coordinate all ESC
documentation (evidence)
requirements in accordance with
IPART Evidence Pack & Schedule 1
HRE
Fixed
Fee
Complete the IPART Evidence Pack
and arrange for sign-offs
HRE -
Included in
HRE % Fee
Complete the IPART Evidence Pack
including and arrange for sign-offs
HRE -
Included in
HRE % Fee
Verify and document upgrade lighting
complies with the Building Code of
Australia and ASNZS 1680***
Client
Not required if
lighting design
completed
Verify and document upgrade lighting
complies with the BCA and ASNZS
1680
HRE
Fixed
Fee
Submit IPART Evidence Pack and
documentation in accordance with
NSW Energy Saving Scheme Rule
and methodology
HRE -
Included in
HRE % Fee
Submit IPART Evidence Pack and
documentation in accordance with
NSW Energy Saving Scheme Rule
and methodology
HRE -
Included in
HRE % Fee
Create and trade ESCs
HRE –
Included in
HRE % Fee
Create and trade ESCs
HRE –
Included in
HRE % Fee
Client BYO
Evidence Package
Client Select
Flexible Package
12. Metered Baseline Methodology
What is the process?
Start
a. HRE - Collect and
assemble all
documentation
HRE - Verify
documents
b. HRE - Prepare
claim in
accordance with
the NSW ESS Rule
c. HRE - Verify
upgrade works in
accordance with
the NSW ESS Rule
d. HRE - Calculate
ESCs
Step 2
Prepare ESC Claim
a. HRE -
Sell
ESCs to
the
highest
bidder
(liable
party)
b. HRE -
Confirm
sale of
ESCs
with the
Client
Step 4
Trade
ESCs
a. Haron Robson
Energy Pty Ltd
(HRE) - Arrange
for sign-offs on
Nomination
Form before the
Implementation
Date
No up-front fees or progress payments required
Step 1
a. HRE -
Register
ESCs in
ESS
Registry
b. HRE -
Confirm
ESCs
registered
with the
Client
Step 3
Register
ESCs
a. HRE - Transfer money
from sale of ESCs less
commission and fees into
the nominated bank
account
Step 5
Pay Client
Nomination and
Kick-Off Meeting
Client Revenue1 – money returned to the client from ESC creation & trade è $110K1 / over 5x yrs
Commission2 & Fees3 deducted
from Gross Revenue
1. Client Revenue calculated as per Table 1 Slide: Breakdown. This is an indicative value not the realised value. The realised value will be determined upon
sale of ESCs at a future date.
2. Commission as per Table 2 Slide: Breakdown
3. Fees as per Table 3 Slide: Breakdown
Note: Metered Baseline Methodology for chiller upgrades allows ESCs to be created annually for a maximum period of 5 years only.
Verify energy savings for a
minimum of 12 months
Chiller upgrade
completed
Create and trade ESCs
12 months post chiller CX
Pay client 12 months post
chiller upgrade & annually 5x
Net
Amount
Deliverables-Description
Fee
Time
$
E.g. Client Year 1 - $22K1
E.g. Client Year 2 - $22K1
E.g. Client Year 3 - $22K1
E.g. Client Year 4 - $22K1
E.g. Client Year 5 - $22K1
Option No.4 - chiller (replacement) upgrade
Upgradeinstalledandoperatingatsite
13. Who else does Haron Robson create
Energy Savings Certificates for?
NSW Health, Commonwealth
Superannuation Fund, Rooty Hill RSL
Club, Colliers, Knight Frank, Eureka
Funds Management and Lend Lease
Who do I contact at Haron Robson
for more information or confirm an
opportunity?
Alan Richardson
Sustainability & Compliance Manager
Email: alanr@haronrobson.com.au
Phone: 7903 4567 or 0417 238 448
Thank you
Before any upgrade works
commence on site simply
confirm by telephone or email
You want to create
certificates.
Sign our Nomination Form
before the implementation
date.
What is your next step?