DOC-20230129-WA0003..pptx
•Download as PPTX, PDF•
0 likes•6 views
This document provides information about different types of power presses, including mechanical power presses, hydraulic presses, and servo electric presses. It discusses press parts, capacities, configurations, styles, deflection issues, clutches/brakes, double action presses, feeding equipment, ancillary equipment, and safety considerations for power presses.
Report
Share
Report
Share
Recommended
Press
The document summarizes safety requirements for mechanical power presses. It discusses the different types of presses including full and part revolution clutches. It describes requirements for controls, safeguarding devices like two-hand controls, light curtains, and pullbacks. Proper installation and maintenance of these safety systems is required to prevent worker injuries at power presses.
Press machines ppt
This document provides information about presses. It begins by defining a press and describing metal forming processes done by presses. It then classifies presses into manual (foot press, arbor press, fly press, toggle press) and power presses (crank press, eccentric press, cam press, screw press, rack & pinion press, hydraulic press, pneumatic press). Several press working terminology are defined, like bed, bolster plate, die set, punch, and stripper. Common press accessories include bases, C-frames, rams, crank shafts, clutches, and brakes. Presses can be selected based on workpiece size, stock width/material, operation type, and required power/speed.
Power press
The document discusses power presses, including their types, parts, sizes, tools, and applications. Power presses are metal forming machines that shape or cut metal through mechanical force without removing chips. They are classified based on power source (manually operated vs power driven) and frame design (gap frame, inclinable frame, adjustable bed type, straight side, horn like, pillar). Key parts include the base, frame, ram, pitman, and driving mechanism. Press size is designated by its maximum load capacity. Common press tools are punches, dies, and die sets. Power presses are widely used in industries like automotive, aircraft, and appliance manufacturing.
Type Of Non cutting Operations (Press Tool)
This document provides information about press tools and presses. It discusses metal forming processes that use presses and press tools to deform metal workpieces into desired shapes through the application of pressure. It then describes the major components of a press working system and various criteria for classifying presses, including by power source, frame type, number of actions, drive mechanism, intended operations, and other specifications. It provides examples of different types of presses and explains specifications that define a press, such as maximum force, stroke length, die space, and shut height.
Chapter6
This document discusses sheet metal working tools and presses. It begins by defining sheet metal working as a chip-less manufacturing process for making components under 20mm thick from sheet metal, using a machine called a press. Presses are then classified based on their power source (mechanical or hydraulic), frame type (gap or straight side), number of slides (single, double, triple action), and actuation method (crankshaft, eccentric, etc.). Key press components like the bed, bolster plate, die set, punch, and stripper are also defined. Blanking and piercing dies are introduced, with dies classified by operation type (cutting vs. forming) and method of operation. The objectives are to identify various press
Classification and Types of Press
This document provides an overview of presses and press classification. It begins with introductions and definitions of press working terminology. Presses are then classified in several ways: by power source (manual, power); frame type (inclinable, gap, straight side); number of actions (single, double, triple); purpose of use (shearing, punching, etc.); and position of frame (inclinable, vertical, horizontal). Common types of presses are also described briefly, including fly, gap frame, hydraulic, and screw presses. The document is from a seminar on press classification presented by Sanket Chandankhede of the Mechanical Engineering department at Yeshwantrao Chavan College of Engineering, Nagpur
HSMG RMG High Shear Mixer Granulator
This document provides information about a high shear mixer granulator (HSMG) with a capacity of 600 liters. It describes the components, functions, process, and specifications of the HSMG. The key components include a mixing chamber, impellers, chopper, discharge port, cone mill, and control panel. It mixes ingredients to make granules for tablet production and can process up to 240 kg of material in a single batch. Safety features and operating procedures are outlined.
A10 vo manual
This document provides specifications for several models of Rexroth Hydraulic variable displacement axial piston pumps. The pumps are designed to provide efficient hydraulic power by varying their displacement based on system demand. Key details include pump dimensions, flow rates, pressure ratings, port locations, and recommended hose sizes for different models. Safety cautions are also provided regarding the operation and servicing of hydraulic systems.
Recommended
Press
The document summarizes safety requirements for mechanical power presses. It discusses the different types of presses including full and part revolution clutches. It describes requirements for controls, safeguarding devices like two-hand controls, light curtains, and pullbacks. Proper installation and maintenance of these safety systems is required to prevent worker injuries at power presses.
Press machines ppt
This document provides information about presses. It begins by defining a press and describing metal forming processes done by presses. It then classifies presses into manual (foot press, arbor press, fly press, toggle press) and power presses (crank press, eccentric press, cam press, screw press, rack & pinion press, hydraulic press, pneumatic press). Several press working terminology are defined, like bed, bolster plate, die set, punch, and stripper. Common press accessories include bases, C-frames, rams, crank shafts, clutches, and brakes. Presses can be selected based on workpiece size, stock width/material, operation type, and required power/speed.
Power press
The document discusses power presses, including their types, parts, sizes, tools, and applications. Power presses are metal forming machines that shape or cut metal through mechanical force without removing chips. They are classified based on power source (manually operated vs power driven) and frame design (gap frame, inclinable frame, adjustable bed type, straight side, horn like, pillar). Key parts include the base, frame, ram, pitman, and driving mechanism. Press size is designated by its maximum load capacity. Common press tools are punches, dies, and die sets. Power presses are widely used in industries like automotive, aircraft, and appliance manufacturing.
Type Of Non cutting Operations (Press Tool)
This document provides information about press tools and presses. It discusses metal forming processes that use presses and press tools to deform metal workpieces into desired shapes through the application of pressure. It then describes the major components of a press working system and various criteria for classifying presses, including by power source, frame type, number of actions, drive mechanism, intended operations, and other specifications. It provides examples of different types of presses and explains specifications that define a press, such as maximum force, stroke length, die space, and shut height.
Chapter6
This document discusses sheet metal working tools and presses. It begins by defining sheet metal working as a chip-less manufacturing process for making components under 20mm thick from sheet metal, using a machine called a press. Presses are then classified based on their power source (mechanical or hydraulic), frame type (gap or straight side), number of slides (single, double, triple action), and actuation method (crankshaft, eccentric, etc.). Key press components like the bed, bolster plate, die set, punch, and stripper are also defined. Blanking and piercing dies are introduced, with dies classified by operation type (cutting vs. forming) and method of operation. The objectives are to identify various press
Classification and Types of Press
This document provides an overview of presses and press classification. It begins with introductions and definitions of press working terminology. Presses are then classified in several ways: by power source (manual, power); frame type (inclinable, gap, straight side); number of actions (single, double, triple); purpose of use (shearing, punching, etc.); and position of frame (inclinable, vertical, horizontal). Common types of presses are also described briefly, including fly, gap frame, hydraulic, and screw presses. The document is from a seminar on press classification presented by Sanket Chandankhede of the Mechanical Engineering department at Yeshwantrao Chavan College of Engineering, Nagpur
HSMG RMG High Shear Mixer Granulator
This document provides information about a high shear mixer granulator (HSMG) with a capacity of 600 liters. It describes the components, functions, process, and specifications of the HSMG. The key components include a mixing chamber, impellers, chopper, discharge port, cone mill, and control panel. It mixes ingredients to make granules for tablet production and can process up to 240 kg of material in a single batch. Safety features and operating procedures are outlined.
A10 vo manual
This document provides specifications for several models of Rexroth Hydraulic variable displacement axial piston pumps. The pumps are designed to provide efficient hydraulic power by varying their displacement based on system demand. Key details include pump dimensions, flow rates, pressure ratings, port locations, and recommended hose sizes for different models. Safety cautions are also provided regarding the operation and servicing of hydraulic systems.
A presentation on picanol omni plus 800
The document provides information on the Picanol Omni Plus 800 air jet weaving machine. It describes the machine specifications including a maximum speed of 850 rpm. It outlines the main parts of the machine such as the sumo motor, pre-winder, reed, and temples. It discusses the key motions including shedding, picking, and beat up. It provides details on the shedding mechanism and parameters. It also describes the pre-winder, nozzles, and air pressure used for weft insertion. The document summarizes the let-off, take up, and stop motions powered by servo motors. It concludes by listing the various motors used in the air jet loom.
Bolzoni Auramo Push Pulls 2010
The document describes various push pull models for handling slip sheets instead of pallets. The dedicated push pull is designed for exclusively slip sheet loads. The fork-mounted push pull attaches to forklift carriages for intermittent slip sheet use. The Mark 55 handles both slip sheets and pallets with adjustable outer platens, side shifting, and platen positioning cylinders. All models feature pantograph arms, gripper jaws, and push plates to securely clamp slip sheets for transport.
Pull-Through Wire Straightener
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
Pneumatic Feeder Air Feeder
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
Pneumatic Feeder Air Feeder
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
Pneumatic Feeder Air Feeder
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
Komatsu D65WX-150E0 Dozer Bulldozer Service Repair Manual (SN 69001 and up).pdf
This shop manual provides specifications and maintenance instructions for the Komatsu D65WX-15EO Power Angle Power Tilt dozer for serial numbers 69001 and up. It includes sections on general specifications, dimensions, engine details, hydraulic systems, undercarriage, and work equipment. The manual emphasizes that Komatsu is continuously improving its products and reserves the right to make changes without notice. It recommends contacting your local distributor for the latest revision.
Landing Gear
The document describes the main components of aircraft landing gear systems. It lists 15 main components including struts, links, actuators, and cylinders that perform functions like absorbing shock, maintaining wheel alignment, locking the gear in position, and retracting and extending the landing gear. The document also discusses common landing gear materials like high-strength steel, titanium, and aluminum alloys and potential failure modes from fatigue, stress corrosion, impacts, and other sources.
HYPERTURN 65 Powermill - High-performance turning/milling center for complet...
HYPERTURN 65 Powermill - High-performance turning/milling center for complet...EMCO Drehmaschinen, Fräsmaschinen & CNC Training
More clearance, more power, more possibilities:
with a spindle distance of 1400 mm, a powerful counter spindle which also allows 4-axis machining, a B-axis with a direct drive for complex 5-axis simultaneous milling operations and all proven, high-quality features of the Hyperturn series, the Hyperturn 65 Powermill-G2 is a powerful addition to every machine range.Manufacturing process 3ed unit full
The document discusses punching and blanking processes, which are sheet metal forming processes where a finite volume of metal is removed from a sheet using a die and punch. Key details include:
- Punching and blanking are used widely in automotive, aerospace, and appliance industries for mass production.
- The cutting tools are usually hardened steel or tungsten carbide, while the sheet metal can be materials like aluminum, brass, copper, and stainless steel.
- In punching, the final product is the sheet with material removed, while in blanking it is the removed portion. Punching presses provide the force needed and can be manually or CNC controlled.
Bilayer Tablet Press
Chamunda DUO PRESS (Double Rotary) is developed to meet the R & D or production sector in the Tableting zone of the pharmaceutical industry. The aesthetic look and innovative compact design built on the principles of latest tablet technology further supports the consistency of the machine. This machine comes with the variant tooling such as “D”, “B”, “D + B” and “D + B + BB” to meet the customize requirements.
HYDRAULIC BREAKERS SOOSAN SQ SERIES
The document summarizes Soosan's SQ Line Silenced Series of hydraulic breakers. It describes the breakers' advanced percussion mechanism that generates extra power, integrated power control system with different operating modes, and auto shut-off function to prevent damage from blank hammering. It provides details on the breakers' enhanced vibration dampening, robust structure, maintenance friendliness, and ranges from medium to heavy-duty sizes suitable for excavators from 15-100 tons.
The e-MP Series
The e-MP Series
HIGHLY EFFICIENT AND VERSATILE MULTISTAGE RING SECTION PUMPS UP TO 1700hp
Applications limited only by your imagination
Zero Turn Radius Report - Team Panache (1)
The document describes a proposed design for modifying a John Deere 5065E tractor to achieve zero turn or minimum turning radius capability. Key aspects of the design include:
1. Eliminating the gearbox transmission and differential, and incorporating braking and transmission systems into a hydraulic circuit using two independent hydraulic motors to enable wheels to rotate in the same or opposite directions.
2. Using hydraulically powered tie rods connected to the steering arms to enable the front wheels to turn in opposite directions during zero turn maneuvers while regular steering is maintained via power steering.
3. Employing directional control valves and pressure relief valves to manage fluid flow and pressures to different components including the steering, transmission, and tie rods
HYDRAULIC PRESS
The document discusses hydraulic presses made by Anhui Lai Fu NC Machine Tool Co. Ltd. Specifically, it describes their YL32 series four-column hydraulic presses. The presses have a three-beam, four-pole structure for stability and space for large dies. They can be operated manually or semi-automatically. The presses offer accuracy, rigidity, stability, flexible controls, safety features, and the ability to precisely control stroke and pressure. Deep drawing is also discussed, which uses hydraulic presses or double-action presses to form sheet metal parts through drawing and stamping.
DESIGN AND FABRICATION.pptx
This document describes the design and fabrication of a pneumatic sheet metal bending machine. The machine uses compressed air to power a pneumatic cylinder that drives the bending punch. It is designed to be simple to operate, efficient, and cost-effective. The key components are a pneumatic cylinder, direction control valve, compressor, bending punch and die. When activated, compressed air enters the cylinder to push the punch and bend the metal sheet placed between the punch and die. The machine is portable and suitable for small industries needing an affordable bending solution.
Shaper machine
This document provides information about a shaper machine. It begins with identifying the student (Siddhant Gupta) and their branch/section. It then introduces shapers as reciprocating machine tools used to produce flat surfaces. The main sections describe the function of shapers to produce flat planes, the different types classified by mechanism and ram position, and the principal parts of a shaper like the ram, table, tool head. It also explains the quick return mechanism using a crank and slotted link and applications of shaper machines.
bansal_ppt_no_border_new
The document provides information about Bansal Power Presses, a manufacturer of power presses located in Rajkot, India. The summary is:
Bansal Power Presses has been producing leading power presses for over 50 years. They specialize in pneumatic, high speed, cross shaft, and other types of power presses. The company has a modern facility with various metalworking machines and quality control processes to produce presses from 35 to 400 tons for applications like blanking, punching, and stamping. Bansal Power Presses serves customers across India with sales and service support.
Newspaper Printing Machines | Rottaprintindia
Newspaper Printing Machines - Rottaprintindia is Newspaper Printing Machines Supplier & Manufacturers in India. If you are looking for Newspaper Printing Machine Manufacturers? Contact us @ info@rottaprintindia.com for Newspaper Printing Machines. Rotta Print India supply superior quality printing machines across the world.
Komatsu d65 wx 150e0 dozer bulldozer service repair manual (sn 69001 and up)
The document provides specifications and maintenance standards for the track frame and recoil spring assembly of a D65WX-15E0 Power Angle Power Tilt (PAT) dozer. Key details include:
- The recoil spring is used to adjust track shoe tension and damp shocks. It has a free length of 791.5mm and installed length of 634mm.
- Maintenance standards include acceptable clearances for pistons and bushings, limits for frame deformation, and specifications for idler yoke press fitting force and grease quantity.
- The track frame arrangement has 8 single flange rollers and 2 double flange rollers per side.
servo motor.pptx
The document discusses servo motors. It defines a servo motor as a rotary or linear actuator that allows for precise control of position, velocity, and acceleration through feedback signals. There are two main types: DC servo motors which use armature voltage control and are accurate and fast responding, and AC servo motors which include encoders for closed-loop control and precision movement. Examples of servo motor applications include robotics, automation equipment, cameras, doors, and solar panels where precise movement and positioning is required.
myrolemodel-160812175806.pptx
Dr. APJ Abdul Kalam is the author's role model. He was born in 1931 in India and had a humble upbringing. He struggled throughout his childhood to achieve his dream of becoming a pilot. Despite facing challenges, he was determined and achieved great success as a scientist and professor. He received many honors for his contributions to India's space and missile development programs. The author admires Dr. Kalam for his simplicity, struggle, and contributions towards empowering youth.
More Related Content
Similar to DOC-20230129-WA0003..pptx
A presentation on picanol omni plus 800
The document provides information on the Picanol Omni Plus 800 air jet weaving machine. It describes the machine specifications including a maximum speed of 850 rpm. It outlines the main parts of the machine such as the sumo motor, pre-winder, reed, and temples. It discusses the key motions including shedding, picking, and beat up. It provides details on the shedding mechanism and parameters. It also describes the pre-winder, nozzles, and air pressure used for weft insertion. The document summarizes the let-off, take up, and stop motions powered by servo motors. It concludes by listing the various motors used in the air jet loom.
Bolzoni Auramo Push Pulls 2010
The document describes various push pull models for handling slip sheets instead of pallets. The dedicated push pull is designed for exclusively slip sheet loads. The fork-mounted push pull attaches to forklift carriages for intermittent slip sheet use. The Mark 55 handles both slip sheets and pallets with adjustable outer platens, side shifting, and platen positioning cylinders. All models feature pantograph arms, gripper jaws, and push plates to securely clamp slip sheets for transport.
Pull-Through Wire Straightener
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
Pneumatic Feeder Air Feeder
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
Pneumatic Feeder Air Feeder
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
Pneumatic Feeder Air Feeder
Manufacturers and Suppliers of Pressing Machine, Pneumatic Feeders, Strip Straighteners, Cut To Length Lines, Coil Feeding Lines, Industrial Automation Systems, Mumbai, India
Komatsu D65WX-150E0 Dozer Bulldozer Service Repair Manual (SN 69001 and up).pdf
This shop manual provides specifications and maintenance instructions for the Komatsu D65WX-15EO Power Angle Power Tilt dozer for serial numbers 69001 and up. It includes sections on general specifications, dimensions, engine details, hydraulic systems, undercarriage, and work equipment. The manual emphasizes that Komatsu is continuously improving its products and reserves the right to make changes without notice. It recommends contacting your local distributor for the latest revision.
Landing Gear
The document describes the main components of aircraft landing gear systems. It lists 15 main components including struts, links, actuators, and cylinders that perform functions like absorbing shock, maintaining wheel alignment, locking the gear in position, and retracting and extending the landing gear. The document also discusses common landing gear materials like high-strength steel, titanium, and aluminum alloys and potential failure modes from fatigue, stress corrosion, impacts, and other sources.
HYPERTURN 65 Powermill - High-performance turning/milling center for complet...
HYPERTURN 65 Powermill - High-performance turning/milling center for complet...EMCO Drehmaschinen, Fräsmaschinen & CNC Training
More clearance, more power, more possibilities:
with a spindle distance of 1400 mm, a powerful counter spindle which also allows 4-axis machining, a B-axis with a direct drive for complex 5-axis simultaneous milling operations and all proven, high-quality features of the Hyperturn series, the Hyperturn 65 Powermill-G2 is a powerful addition to every machine range.Manufacturing process 3ed unit full
The document discusses punching and blanking processes, which are sheet metal forming processes where a finite volume of metal is removed from a sheet using a die and punch. Key details include:
- Punching and blanking are used widely in automotive, aerospace, and appliance industries for mass production.
- The cutting tools are usually hardened steel or tungsten carbide, while the sheet metal can be materials like aluminum, brass, copper, and stainless steel.
- In punching, the final product is the sheet with material removed, while in blanking it is the removed portion. Punching presses provide the force needed and can be manually or CNC controlled.
Bilayer Tablet Press
Chamunda DUO PRESS (Double Rotary) is developed to meet the R & D or production sector in the Tableting zone of the pharmaceutical industry. The aesthetic look and innovative compact design built on the principles of latest tablet technology further supports the consistency of the machine. This machine comes with the variant tooling such as “D”, “B”, “D + B” and “D + B + BB” to meet the customize requirements.
HYDRAULIC BREAKERS SOOSAN SQ SERIES
The document summarizes Soosan's SQ Line Silenced Series of hydraulic breakers. It describes the breakers' advanced percussion mechanism that generates extra power, integrated power control system with different operating modes, and auto shut-off function to prevent damage from blank hammering. It provides details on the breakers' enhanced vibration dampening, robust structure, maintenance friendliness, and ranges from medium to heavy-duty sizes suitable for excavators from 15-100 tons.
The e-MP Series
The e-MP Series
HIGHLY EFFICIENT AND VERSATILE MULTISTAGE RING SECTION PUMPS UP TO 1700hp
Applications limited only by your imagination
Zero Turn Radius Report - Team Panache (1)
The document describes a proposed design for modifying a John Deere 5065E tractor to achieve zero turn or minimum turning radius capability. Key aspects of the design include:
1. Eliminating the gearbox transmission and differential, and incorporating braking and transmission systems into a hydraulic circuit using two independent hydraulic motors to enable wheels to rotate in the same or opposite directions.
2. Using hydraulically powered tie rods connected to the steering arms to enable the front wheels to turn in opposite directions during zero turn maneuvers while regular steering is maintained via power steering.
3. Employing directional control valves and pressure relief valves to manage fluid flow and pressures to different components including the steering, transmission, and tie rods
HYDRAULIC PRESS
The document discusses hydraulic presses made by Anhui Lai Fu NC Machine Tool Co. Ltd. Specifically, it describes their YL32 series four-column hydraulic presses. The presses have a three-beam, four-pole structure for stability and space for large dies. They can be operated manually or semi-automatically. The presses offer accuracy, rigidity, stability, flexible controls, safety features, and the ability to precisely control stroke and pressure. Deep drawing is also discussed, which uses hydraulic presses or double-action presses to form sheet metal parts through drawing and stamping.
DESIGN AND FABRICATION.pptx
This document describes the design and fabrication of a pneumatic sheet metal bending machine. The machine uses compressed air to power a pneumatic cylinder that drives the bending punch. It is designed to be simple to operate, efficient, and cost-effective. The key components are a pneumatic cylinder, direction control valve, compressor, bending punch and die. When activated, compressed air enters the cylinder to push the punch and bend the metal sheet placed between the punch and die. The machine is portable and suitable for small industries needing an affordable bending solution.
Shaper machine
This document provides information about a shaper machine. It begins with identifying the student (Siddhant Gupta) and their branch/section. It then introduces shapers as reciprocating machine tools used to produce flat surfaces. The main sections describe the function of shapers to produce flat planes, the different types classified by mechanism and ram position, and the principal parts of a shaper like the ram, table, tool head. It also explains the quick return mechanism using a crank and slotted link and applications of shaper machines.
bansal_ppt_no_border_new
The document provides information about Bansal Power Presses, a manufacturer of power presses located in Rajkot, India. The summary is:
Bansal Power Presses has been producing leading power presses for over 50 years. They specialize in pneumatic, high speed, cross shaft, and other types of power presses. The company has a modern facility with various metalworking machines and quality control processes to produce presses from 35 to 400 tons for applications like blanking, punching, and stamping. Bansal Power Presses serves customers across India with sales and service support.
Newspaper Printing Machines | Rottaprintindia
Newspaper Printing Machines - Rottaprintindia is Newspaper Printing Machines Supplier & Manufacturers in India. If you are looking for Newspaper Printing Machine Manufacturers? Contact us @ info@rottaprintindia.com for Newspaper Printing Machines. Rotta Print India supply superior quality printing machines across the world.
Komatsu d65 wx 150e0 dozer bulldozer service repair manual (sn 69001 and up)
The document provides specifications and maintenance standards for the track frame and recoil spring assembly of a D65WX-15E0 Power Angle Power Tilt (PAT) dozer. Key details include:
- The recoil spring is used to adjust track shoe tension and damp shocks. It has a free length of 791.5mm and installed length of 634mm.
- Maintenance standards include acceptable clearances for pistons and bushings, limits for frame deformation, and specifications for idler yoke press fitting force and grease quantity.
- The track frame arrangement has 8 single flange rollers and 2 double flange rollers per side.
Similar to DOC-20230129-WA0003..pptx (20)
Komatsu D65WX-150E0 Dozer Bulldozer Service Repair Manual (SN 69001 and up).pdf
Komatsu D65WX-150E0 Dozer Bulldozer Service Repair Manual (SN 69001 and up).pdf
HYPERTURN 65 Powermill - High-performance turning/milling center for complet...
HYPERTURN 65 Powermill - High-performance turning/milling center for complet...
Komatsu d65 wx 150e0 dozer bulldozer service repair manual (sn 69001 and up)
Komatsu d65 wx 150e0 dozer bulldozer service repair manual (sn 69001 and up)
More from ArpitMistry6
servo motor.pptx
The document discusses servo motors. It defines a servo motor as a rotary or linear actuator that allows for precise control of position, velocity, and acceleration through feedback signals. There are two main types: DC servo motors which use armature voltage control and are accurate and fast responding, and AC servo motors which include encoders for closed-loop control and precision movement. Examples of servo motor applications include robotics, automation equipment, cameras, doors, and solar panels where precise movement and positioning is required.
myrolemodel-160812175806.pptx
Dr. APJ Abdul Kalam is the author's role model. He was born in 1931 in India and had a humble upbringing. He struggled throughout his childhood to achieve his dream of becoming a pilot. Despite facing challenges, he was determined and achieved great success as a scientist and professor. He received many honors for his contributions to India's space and missile development programs. The author admires Dr. Kalam for his simplicity, struggle, and contributions towards empowering youth.
msdhoni-160131090355.pptx
MS Dhoni is considered one of the most successful captains in international cricket history. He leads with vision, a positive attitude, and risk-taking ability. Dhoni inspires his team through his magnetic personality, confidence in others, and by leading from the front as a player. His leadership style is characterized by humility, composure under pressure as "Captain Cool", and earning the respect of the team. Dhoni's dream was to serve in the Indian Army, and he was later given an honorary position in the military in recognition of his achievements in cricket.
FMHM.pptx
The document discusses different types of hydraulic turbines used to convert hydraulic energy into mechanical energy. It describes three main turbines:
1. The Pelton wheel, an impulse turbine used for high heads. Water jets strike its buckets to induce rotation.
2. The Francis turbine, a mixed-flow reaction turbine for medium heads. Water enters radially and exits axially through its radially discharging runner.
3. The Kaplan turbine, an axial-flow reaction turbine for low heads. Its adjustable blades allow for efficient power extraction at low heads and high flows.
M&M.pptx
Linear measurement instruments can be classified based on their method of measurement (direct or indirect) and accuracy (precision or non-precision types). Graduated instruments like vernier callipers use an auxiliary scale to enhance measurement accuracy. Non-graduated instruments include callipers and wire gauges. Vernier callipers and micrometers provide highly accurate measurements through their vernier scale and screw mechanisms. Limit gauges check that a part's dimensions are within the specified tolerances using GO and NO-GO sides that represent the minimum and maximum size limits.
shapermachine-190207055104.pdf
The document discusses the shaper machine, which is a reciprocating machine tool used to produce flat surfaces. It has a ram, tool head, and table. The tool head cuts on the forward stroke and returns idle on the back stroke. Flat surfaces can be made horizontally, vertically, or at angles based on the movement of the tool head and table. Shapers are classified based on ram travel direction and cutting stroke action. Other machine tools discussed include the planer, slotter, drilling machines, and broaching.
meauringinstrumentsppt-150822115110-lva1-app6892.pdf
This document describes several common measuring instruments, including metre rules, measuring tapes, vernier callipers, and screw gauges. It explains what each instrument is used for and provides details on their construction and how measurements are taken. For example, it states that metre rules measure length using centimetre and millimetre markings, while vernier callipers can measure internal and external diameters using a main scale and movable vernier scale that has a least count of 0.1 mm. The document also discusses zero error and how to apply corrections.
lecture13.ppt
The document discusses measuring instruments including ammeters, voltmeters, and ohmmeters. It explains how each instrument works and how it is connected in a circuit. It also discusses the effects the instruments can have on the actual current or voltage in a circuit due to their internal resistances. The document then covers RC circuits and how the current and charge on a capacitor change over time when connected to a voltage source or allowed to discharge through a resistor. Key points include defining the RC time constant and its role in the exponential charging and discharging curves.
More from ArpitMistry6 (8)
meauringinstrumentsppt-150822115110-lva1-app6892.pdf
meauringinstrumentsppt-150822115110-lva1-app6892.pdf
Recently uploaded
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
● What is event processing in MuleSoft?
● Types of event processing models in Mule 4
● Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Constructing Your Course Container for Effective Communication
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Recently uploaded (20)
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Constructing Your Course Container for Effective Communication
Constructing Your Course Container for Effective Communication
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
DOC-20230129-WA0003..pptx
- 1. B&B INSTITUTE OF THCHOLOGY V.V NAGAR PREPARED BY:-MISTRY ARPIT P. SHIVANI TOOLS PVT.LTD.
- 2. Power Presses A press is a machine with a stationary bed and a guided slide (or ram) that reciprocates toward and away from it. Presses are stroke-controlled devices. Presses can be: ● Manual (arbor press, screw press, kick press) ● Power (mechanical or hydraulic)
- 3. Mechanical Power Presses Mechanical - Energy is stored in flywheel Fast Production Rates Capacity to 6,000 tons
- 5. Press Capacity Tonnage Shut Height or Daylight Physical Size Stroke Adjustment of Ram Speed - SPM See note on shut height.
- 6. Note The distance from the top of the bolster to the bottom of the slide (SDAU) is sometimes called the “shut height” but “die height” is the better term. Be sure you know what shut height they are referring to.
- 7. Drive Configurations Direct Drive Single Gear Reduction Multiple Gear Reduction
- 8. Hydraulic Press Controlled Stroke Easy to control Smooth operation Full tonnage available at top of stroke Hydraulic presses can reverse mid-stroke High Capacity 50,000+ tons (236 locomotives)
- 11. Press Styles Gap or C-Frame Gap Frame Presses OBI - Open-Back Inclinable OBS - Open-Back Stationary ABS - Adjustable Bed Stationary Horn Press
- 12. Deflection C-Frames will deflect. The result is misalignment of punch and die. How much they deflect is the question.
- 13. Press Styles (Straight Side Press) Limits die accessibility. Deflection is in the direction of punching.
- 14. Clutches & Brakes Connect/disconnect the crank mechanism to/from the flywheel Stop the motion
- 15. Double Action Presses For deep drawing operations Have separate slides for ● Drawing ● Blankholding
- 16. Die sets may be designed to accept blanks or coil stock. Press Feeding
- 17. Uncoilers
- 18. Ancillary Press equipment Straighteners Apply alternating compressive and tensile stresses on the material to relieve the plastic deformation that was developed during coiling.
- 19. Strip Feeder Types include: Air Slide Feeds Hydraulic Slide Feeds Motor-Driven Slide Feeds Roll Feeds Can be push feed Or Pull feed (for thin material)
- 21. Die Cushion or Pressure Pads Can be used for blank holder pressure Can be used for liftout or knockout purposes to remove stampingsfrom the die.
- 22. Fourslide Press
- 23. Press Brake
- 24. Power Press Safety Guarding Operation Danger in Setup ● Close Tolerances ● Lots of Force ● Lockout/Tagout