The document provides specifications and maintenance standards for the track frame and recoil spring assembly of a D65WX-15E0 Power Angle Power Tilt (PAT) dozer. Key details include:
- The recoil spring is used to adjust track shoe tension and damp shocks. It has a free length of 791.5mm and installed length of 634mm.
- Maintenance standards include acceptable clearances for pistons and bushings, limits for frame deformation, and specifications for idler yoke press fitting force and grease quantity.
- The track frame arrangement has 8 single flange rollers and 2 double flange rollers per side.
Komatsu wa150 5 wheel loader service repair manual (sn h50051 and up)ufjjsjkkekmmd
This document contains specifications and technical information for a Komatsu WA150-5H wheel loader, including:
1. Dimensions, weights, performance data, and engine specifications.
2. Lists of components and their individual weights to aid in transport and handling.
3. Recommended lubricants and coolants for areas like the engine, transmission, hydraulics, axles, and cooling system.
Hyster d005 (h60 e europe) forklift service repair manualujfdjjkskkdme
This document provides instructions for servicing GM engines. It describes removing and installing the cylinder head and valve mechanism. Key steps include using a compressor tool to remove the valve springs, cleaning carbon from the combustion chambers, inspecting the valves and valve guides for wear, and checking clearances. The valve seats can be repaired with a cutter tool if damaged, or the cylinder head replaced if not repairable. Rocker arm studs should also be replaced if damaged.
Hyster c004 (s120 e) forklift service repair manualfjsjefksekkksemm
This document provides instructions for servicing and repairing steering axles on various lift truck models. It describes the components of the steering axle assembly and different types of pivot mounts used. Procedures are provided for removing and installing steering axles with stub shaft mounts and rubber mounts. The document also provides instructions for removing and servicing wheel hubs, spindles, bearings and tie rods. Safety warnings are given for putting lift trucks on blocks or stands when performing maintenance.
Hyster k006 (h6.0 ft) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT and H7.0FT, including:
- Lift capacities of 6123kg and 7030kg respectively
- Tire sizes of 8.25x15 for both drive and steer tires
- Fluid capacities for fuel, engine oil, hydraulic oil, and other components
- Electrical system specifications including alternator outputs and battery details
- Transmission oil pressures and relief valves
- Steering system details like relief pressure and turning radius
- Instructions for removing the drive axle, draining fluids, and disconnecting brake and cooling lines.
Komatsu wa150 pz 5 wheel loader service repair manual (sn h50051 and up)fusjejedrfjskekem
This document provides specifications and details for the WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, horsepower, torque, and fuel consumption.
- Performance specifications such as operating weight, bucket capacity, travel speeds, and gradeability.
- Component weights and filling capacities for fluids like engine oil, hydraulic oil, axle oil, and coolant.
- Lists lubricants and their recommended viscosities for different applications in the machine.
In under 3 sentences, it summarizes key technical specifications and component details for the WA150PZ-5 wheel loader.
Kubota d1005 e3 bg diesel engine service repair manualfusjjfksekmme
This document provides specifications for KUBOTA 05-E3B and 05-E3BG series diesel engines, including dimensions, displacement, power output, engine speed, injection timing, and other technical details. It lists specifications for multiple engine models, noting variations in items like number of cylinders, bore size, power ratings, and dimensions. The specifications provided are for standard engines of each base model. Conversions from kilowatts to horsepower are given.
Hyster l177 (h40 ft) forklift service repair manualfujdjffjkskemme
This document provides instructions for removing the drive axle, differential, and wet disc brake from Hyster lift trucks. It involves raising the truck, removing the wheels and mast assembly, draining fluids from the drive axle, disconnecting hoses and cables, and removing mounting hardware and shafts. Detailed steps are provided to disassemble the reduction gear assembly, including removing pins, gears, bearings, and other components. Safety warnings are included to prevent injury when putting the truck on blocks, draining tires, and working on pressurized systems.
Hyster n006 (h6.0 ft) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes, fuel capacities, fluid capacities, and recommended fluids
- Electrical system specifications such as battery size and alternator output
- Transmission oil pressures and hydraulic system relief pressures
- Instructions for removing the drive axle, which include draining fluids and disconnecting brake lines
Komatsu wa150 5 wheel loader service repair manual (sn h50051 and up)ufjjsjkkekmmd
This document contains specifications and technical information for a Komatsu WA150-5H wheel loader, including:
1. Dimensions, weights, performance data, and engine specifications.
2. Lists of components and their individual weights to aid in transport and handling.
3. Recommended lubricants and coolants for areas like the engine, transmission, hydraulics, axles, and cooling system.
Hyster d005 (h60 e europe) forklift service repair manualujfdjjkskkdme
This document provides instructions for servicing GM engines. It describes removing and installing the cylinder head and valve mechanism. Key steps include using a compressor tool to remove the valve springs, cleaning carbon from the combustion chambers, inspecting the valves and valve guides for wear, and checking clearances. The valve seats can be repaired with a cutter tool if damaged, or the cylinder head replaced if not repairable. Rocker arm studs should also be replaced if damaged.
Hyster c004 (s120 e) forklift service repair manualfjsjefksekkksemm
This document provides instructions for servicing and repairing steering axles on various lift truck models. It describes the components of the steering axle assembly and different types of pivot mounts used. Procedures are provided for removing and installing steering axles with stub shaft mounts and rubber mounts. The document also provides instructions for removing and servicing wheel hubs, spindles, bearings and tie rods. Safety warnings are given for putting lift trucks on blocks or stands when performing maintenance.
Hyster k006 (h6.0 ft) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT and H7.0FT, including:
- Lift capacities of 6123kg and 7030kg respectively
- Tire sizes of 8.25x15 for both drive and steer tires
- Fluid capacities for fuel, engine oil, hydraulic oil, and other components
- Electrical system specifications including alternator outputs and battery details
- Transmission oil pressures and relief valves
- Steering system details like relief pressure and turning radius
- Instructions for removing the drive axle, draining fluids, and disconnecting brake and cooling lines.
Komatsu wa150 pz 5 wheel loader service repair manual (sn h50051 and up)fusjejedrfjskekem
This document provides specifications and details for the WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, horsepower, torque, and fuel consumption.
- Performance specifications such as operating weight, bucket capacity, travel speeds, and gradeability.
- Component weights and filling capacities for fluids like engine oil, hydraulic oil, axle oil, and coolant.
- Lists lubricants and their recommended viscosities for different applications in the machine.
In under 3 sentences, it summarizes key technical specifications and component details for the WA150PZ-5 wheel loader.
Kubota d1005 e3 bg diesel engine service repair manualfusjjfksekmme
This document provides specifications for KUBOTA 05-E3B and 05-E3BG series diesel engines, including dimensions, displacement, power output, engine speed, injection timing, and other technical details. It lists specifications for multiple engine models, noting variations in items like number of cylinders, bore size, power ratings, and dimensions. The specifications provided are for standard engines of each base model. Conversions from kilowatts to horsepower are given.
Hyster l177 (h40 ft) forklift service repair manualfujdjffjkskemme
This document provides instructions for removing the drive axle, differential, and wet disc brake from Hyster lift trucks. It involves raising the truck, removing the wheels and mast assembly, draining fluids from the drive axle, disconnecting hoses and cables, and removing mounting hardware and shafts. Detailed steps are provided to disassemble the reduction gear assembly, including removing pins, gears, bearings, and other components. Safety warnings are included to prevent injury when putting the truck on blocks, draining tires, and working on pressurized systems.
Hyster n006 (h6.0 ft) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes, fuel capacities, fluid capacities, and recommended fluids
- Electrical system specifications such as battery size and alternator output
- Transmission oil pressures and hydraulic system relief pressures
- Instructions for removing the drive axle, which include draining fluids and disconnecting brake lines
Hyster F004 (S100XM PRS) Forklift Service Repair Manualfjskemdmmen
This is the Highly Detailed factory service repair manual for theHYSTER F004 (S100XM PRS) FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYSTER F004 (S100XM PRS) FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Alternator with Regulator
Brake System
Capacities and Specifications
Cooling System
Diagrams
Drive Axle
Electronic Control Module (ECM) Diagnostic Troubleshooting
Electronic Controlled LPG / Gasoline Fuel System
Frame
GM Engines
High Voltage Switch (HVS) Ignition
Hydraulic Gear Pumps
Hydraulic Pump Drive Assembly
Hydraulic System
Instrument Panel Indicators and Senders
Lift Cylinders
Main Control Valve
Masts
Metric and Inch (SAE) Fasteners
Periodic Maintenance
Perkins Diesel Engines
Single-Speed Powershift Transmission
Starter
Steering Axle
Steering Control Unit
Tilt Cylinders
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYSTER F004 (S100XM PRS) FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Hyster k019 (h6 xm 12ec europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Cummins diesel engines and Kion lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, mast speeds, hydraulic system specifications, transmission specifications, and torque specifications for servicing components. The document contains model-specific data for H8-H16XM lift trucks.
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specification tables provide details on tune-up procedures, fluid capacities, component clearances and sizes for each model.
KUBOTA D1005-E3B DIESEL ENGINE Service Repair Manualjksemndmm
This is the Highly Detailed factory service repair manual for theKUBOTA D1005-E3B DIESEL ENGINE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KUBOTA D1005-E3B DIESEL ENGINE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Engine Identification
General Precautions
Maintenance Check List
Check and Maintenance
Special Tools
Engine Body
Closed Breather
Half-Floating Head Cover (D1305-E3B / E3BG)
Governor
Boost Compensator
Troubleshooting
Servicing Specifications
Tightening Torques
Checking, Disassembling and Servicing
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKUBOTA D1005-E3B DIESEL ENGINE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Hyster E008 (H550F) Forklift Service Repair Manualfjksekmdmm
This is the Highly Detailed factory service repair manual for theHYSTER E008 (H550F) FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYSTER E008 (H550F) FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Alternator with Regulator
Assembly Guide
Auxiliary Brake Caliper
Brake Accumulator
Brake System
Capacities and Specifications
Cooling System
Diagrams
Differential
Extendable Container Attachment (Elme)
Frame
Hydraulic Gear Pumps
Hydraulic Plate
Hydraulic System
Instrument Panel Indicators and Senders
Mast
Metric and Inch (SAE) Fasteners
Oil-Cooled Brakes
Parking Brake
Periodic Maintenance
Planetary Gear Axle
Service Brake
Starter
Steering Axle
Steering System
The Extendable Container Attachment
The Fixed Container Attachment
Three-Speed Powershift Transmission
Tilt Cylinders
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYSTER E008 (H550F) FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Hyundai r75 7 mini excavator service repair manualsoeldksejdksem
This service manual provides maintenance and repair instructions for the excavator. It includes sections on safety precautions, machine outlines and specifications, maintenance schedules, troubleshooting, and repair/replacement of individual parts. The manual aims to help technicians efficiently service the excavator by accurately describing its components and systems, and proper repair techniques. Key maintenance tasks are divided into categories based on operating hours, such as inspections every 25 hours and major overhauls every 1,000 hours.
Hyster f004 (s70 xm) forklift service repair manualfjjkskekfsmem
This document provides specifications and details for the mechanical components and hydraulic operation of a single-speed powershift transmission. It describes the transmission's main components including the torque converter, oil pump, three shaft assemblies, ring gear, pinion, and differential assembly. It also explains the mechanical function of the input shaft, reverse clutch shaft, and countershaft that connect the engine to the transmission and allow it to operate in forward and reverse directions.
Hyster f004 (s120 xms) forklift service repair manualfjjskefkskem
This document provides specifications and details for the mechanical components and hydraulic operation of a single-speed powershift transmission. It describes the transmission's main components including the torque converter, oil pump, three shaft assemblies, ring gear, pinion, and differential assembly. It also explains the mechanical function of the input shaft, reverse clutch shaft, and countershaft that connect the engine to the transmission and allow it to operate in forward and reverse directions.
Hyster f004 (s80 xm) forklift service repair manualfjjsekfksmem
This document provides specifications and details for the mechanical components and hydraulic operation of a single-speed powershift transmission. It describes the transmission components including the torque converter, oil pump, three shaft assemblies, ring gear, pinion, and differential assembly. It also explains the mechanical function of the torque converter, input shaft, reverse clutch shaft, and countershaft. Hydraulic operation and the control valve are discussed but not described in detail.
Komatsu D65WX-150E0 Dozer Bulldozer Service Repair Manual (SN 69001 and up).pdfyeb517967
This shop manual provides specifications and maintenance instructions for the Komatsu D65WX-15EO Power Angle Power Tilt dozer for serial numbers 69001 and up. It includes sections on general specifications, dimensions, engine details, hydraulic systems, undercarriage, and work equipment. The manual emphasizes that Komatsu is continuously improving its products and reserves the right to make changes without notice. It recommends contacting your local distributor for the latest revision.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdff8usuejkddm3e
This shop manual provides specifications and maintenance procedures for the WA150PZ-5 wheel loader. It contains information on the engine mount, transfer mount, damper, cooling system, power train components, hydraulic piping diagram, and maintenance of the HST pump, valves, motor and other systems. The manual is divided into sections covering general information, structure and maintenance, testing and adjusting, disassembly and assembly, and other topics.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdffujskekdmdm
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, horsepower, torque, and fuel consumption.
- Performance specifications such as operating weight, bucket capacity, travel speeds, and gradeability.
- Hydraulic system details including pump models and cylinder specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the engine, transmission, hydraulics, axles, and other systems.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfufskkjdkddmm
This document provides specifications and details for the WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Performance specs such as operating weight, bucket capacity, travel speed, and gradeability.
- Component weights to aid in transport and handling.
- List of recommended lubricants and coolants with filling capacities.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfwll44878604
This shop manual provides specifications and maintenance procedures for the WA150PZ-5 wheel loader. It contains information on the engine mount, transfer mount, damper, cooling system, power train components, hydraulic piping diagram, and maintenance of the HST pump, valves, motor and other systems. The manual is divided into sections covering general information, structure and maintenance, testing and adjusting, disassembly and assembly, and other topics.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfhan647runken
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, horsepower, torque, and fuel consumption.
- Performance specifications such as operating weight, bucket capacity, travel speeds, and gradeability.
- Hydraulic system details including pump models and cylinder sizes.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the engine, transmission, hydraulics, axles, and other systems.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdff8useujkdmdm3
This document provides specifications and details for a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Technical specifications covering operating weight, engine details, performance metrics, and dimensions.
- A weight table breaking down weights of individual machine components.
- A list of recommended lubricants and coolants for the engine, hydraulic and cooling systems, with filling capacities.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfzhan96lun
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine and their specifications.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfbnx6435695
This shop manual provides specifications and maintenance procedures for the WA150PZ-5 wheel loader. It contains information on the engine mount, transfer mount, damper, cooling system, power train components, hydraulic piping diagram, and maintenance of the HST pump, valves, motor and other systems. The manual is divided into sections covering general information, structure and maintenance, testing and adjusting, disassembly and assembly, and other topics.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfxsdkjdmd8ud
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine with filling capacities.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfyingmim6430
This shop manual provides specifications and maintenance procedures for the WA150PZ-5 wheel loader. It contains information on the engine mount, transfer mount, damper, cooling system, power train components, hydraulic piping diagram, and maintenance of the HST pump, valves, motor and other systems. The manual is divided into sections covering general information, structure and maintenance, testing and adjusting, disassembly and assembly, and other topics.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfling3zi
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine with filling capacities.
Komatsu wa150 pz 5 wheel loader service repair manual (sn h50051 and up)fujsjfkkskemme
This document provides specifications and maintenance information for a Komatsu WA150PZ-5 wheel loader. It includes:
- General assembly drawings and specifications such as operating weight, engine details, travel speeds, and dimensions.
- A weight table listing the weight of individual machine components.
- A list of recommended lubricants and coolants for the machine.
- Sections covering the power train, hydraulic system, and other mechanical systems with diagrams, part numbers, and maintenance standards.
The document is a service manual intended to provide technical details and maintenance guidance for repairing and servicing the Komatsu WA150PZ-5 wheel loader. It contains detailed specifications, assembly drawings, component weights,
Hyster F004 (S100XM PRS) Forklift Service Repair Manualfjskemdmmen
This is the Highly Detailed factory service repair manual for theHYSTER F004 (S100XM PRS) FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYSTER F004 (S100XM PRS) FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Alternator with Regulator
Brake System
Capacities and Specifications
Cooling System
Diagrams
Drive Axle
Electronic Control Module (ECM) Diagnostic Troubleshooting
Electronic Controlled LPG / Gasoline Fuel System
Frame
GM Engines
High Voltage Switch (HVS) Ignition
Hydraulic Gear Pumps
Hydraulic Pump Drive Assembly
Hydraulic System
Instrument Panel Indicators and Senders
Lift Cylinders
Main Control Valve
Masts
Metric and Inch (SAE) Fasteners
Periodic Maintenance
Perkins Diesel Engines
Single-Speed Powershift Transmission
Starter
Steering Axle
Steering Control Unit
Tilt Cylinders
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYSTER F004 (S100XM PRS) FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Hyster k019 (h6 xm 12ec europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Cummins diesel engines and Kion lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, mast speeds, hydraulic system specifications, transmission specifications, and torque specifications for servicing components. The document contains model-specific data for H8-H16XM lift trucks.
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specification tables provide details on tune-up procedures, fluid capacities, component clearances and sizes for each model.
KUBOTA D1005-E3B DIESEL ENGINE Service Repair Manualjksemndmm
This is the Highly Detailed factory service repair manual for theKUBOTA D1005-E3B DIESEL ENGINE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KUBOTA D1005-E3B DIESEL ENGINE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Engine Identification
General Precautions
Maintenance Check List
Check and Maintenance
Special Tools
Engine Body
Closed Breather
Half-Floating Head Cover (D1305-E3B / E3BG)
Governor
Boost Compensator
Troubleshooting
Servicing Specifications
Tightening Torques
Checking, Disassembling and Servicing
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKUBOTA D1005-E3B DIESEL ENGINE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Hyster E008 (H550F) Forklift Service Repair Manualfjksekmdmm
This is the Highly Detailed factory service repair manual for theHYSTER E008 (H550F) FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYSTER E008 (H550F) FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Alternator with Regulator
Assembly Guide
Auxiliary Brake Caliper
Brake Accumulator
Brake System
Capacities and Specifications
Cooling System
Diagrams
Differential
Extendable Container Attachment (Elme)
Frame
Hydraulic Gear Pumps
Hydraulic Plate
Hydraulic System
Instrument Panel Indicators and Senders
Mast
Metric and Inch (SAE) Fasteners
Oil-Cooled Brakes
Parking Brake
Periodic Maintenance
Planetary Gear Axle
Service Brake
Starter
Steering Axle
Steering System
The Extendable Container Attachment
The Fixed Container Attachment
Three-Speed Powershift Transmission
Tilt Cylinders
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYSTER E008 (H550F) FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Hyundai r75 7 mini excavator service repair manualsoeldksejdksem
This service manual provides maintenance and repair instructions for the excavator. It includes sections on safety precautions, machine outlines and specifications, maintenance schedules, troubleshooting, and repair/replacement of individual parts. The manual aims to help technicians efficiently service the excavator by accurately describing its components and systems, and proper repair techniques. Key maintenance tasks are divided into categories based on operating hours, such as inspections every 25 hours and major overhauls every 1,000 hours.
Hyster f004 (s70 xm) forklift service repair manualfjjkskekfsmem
This document provides specifications and details for the mechanical components and hydraulic operation of a single-speed powershift transmission. It describes the transmission's main components including the torque converter, oil pump, three shaft assemblies, ring gear, pinion, and differential assembly. It also explains the mechanical function of the input shaft, reverse clutch shaft, and countershaft that connect the engine to the transmission and allow it to operate in forward and reverse directions.
Hyster f004 (s120 xms) forklift service repair manualfjjskefkskem
This document provides specifications and details for the mechanical components and hydraulic operation of a single-speed powershift transmission. It describes the transmission's main components including the torque converter, oil pump, three shaft assemblies, ring gear, pinion, and differential assembly. It also explains the mechanical function of the input shaft, reverse clutch shaft, and countershaft that connect the engine to the transmission and allow it to operate in forward and reverse directions.
Hyster f004 (s80 xm) forklift service repair manualfjjsekfksmem
This document provides specifications and details for the mechanical components and hydraulic operation of a single-speed powershift transmission. It describes the transmission components including the torque converter, oil pump, three shaft assemblies, ring gear, pinion, and differential assembly. It also explains the mechanical function of the torque converter, input shaft, reverse clutch shaft, and countershaft. Hydraulic operation and the control valve are discussed but not described in detail.
Komatsu D65WX-150E0 Dozer Bulldozer Service Repair Manual (SN 69001 and up).pdfyeb517967
This shop manual provides specifications and maintenance instructions for the Komatsu D65WX-15EO Power Angle Power Tilt dozer for serial numbers 69001 and up. It includes sections on general specifications, dimensions, engine details, hydraulic systems, undercarriage, and work equipment. The manual emphasizes that Komatsu is continuously improving its products and reserves the right to make changes without notice. It recommends contacting your local distributor for the latest revision.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdff8usuejkddm3e
This shop manual provides specifications and maintenance procedures for the WA150PZ-5 wheel loader. It contains information on the engine mount, transfer mount, damper, cooling system, power train components, hydraulic piping diagram, and maintenance of the HST pump, valves, motor and other systems. The manual is divided into sections covering general information, structure and maintenance, testing and adjusting, disassembly and assembly, and other topics.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdffujskekdmdm
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, horsepower, torque, and fuel consumption.
- Performance specifications such as operating weight, bucket capacity, travel speeds, and gradeability.
- Hydraulic system details including pump models and cylinder specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the engine, transmission, hydraulics, axles, and other systems.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfufskkjdkddmm
This document provides specifications and details for the WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Performance specs such as operating weight, bucket capacity, travel speed, and gradeability.
- Component weights to aid in transport and handling.
- List of recommended lubricants and coolants with filling capacities.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfwll44878604
This shop manual provides specifications and maintenance procedures for the WA150PZ-5 wheel loader. It contains information on the engine mount, transfer mount, damper, cooling system, power train components, hydraulic piping diagram, and maintenance of the HST pump, valves, motor and other systems. The manual is divided into sections covering general information, structure and maintenance, testing and adjusting, disassembly and assembly, and other topics.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfhan647runken
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, horsepower, torque, and fuel consumption.
- Performance specifications such as operating weight, bucket capacity, travel speeds, and gradeability.
- Hydraulic system details including pump models and cylinder sizes.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the engine, transmission, hydraulics, axles, and other systems.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdff8useujkdmdm3
This document provides specifications and details for a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Technical specifications covering operating weight, engine details, performance metrics, and dimensions.
- A weight table breaking down weights of individual machine components.
- A list of recommended lubricants and coolants for the engine, hydraulic and cooling systems, with filling capacities.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfzhan96lun
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine and their specifications.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfbnx6435695
This shop manual provides specifications and maintenance procedures for the WA150PZ-5 wheel loader. It contains information on the engine mount, transfer mount, damper, cooling system, power train components, hydraulic piping diagram, and maintenance of the HST pump, valves, motor and other systems. The manual is divided into sections covering general information, structure and maintenance, testing and adjusting, disassembly and assembly, and other topics.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfxsdkjdmd8ud
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine with filling capacities.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfyingmim6430
This shop manual provides specifications and maintenance procedures for the WA150PZ-5 wheel loader. It contains information on the engine mount, transfer mount, damper, cooling system, power train components, hydraulic piping diagram, and maintenance of the HST pump, valves, motor and other systems. The manual is divided into sections covering general information, structure and maintenance, testing and adjusting, disassembly and assembly, and other topics.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfling3zi
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine with filling capacities.
Komatsu wa150 pz 5 wheel loader service repair manual (sn h50051 and up)fujsjfkkskemme
This document provides specifications and maintenance information for a Komatsu WA150PZ-5 wheel loader. It includes:
- General assembly drawings and specifications such as operating weight, engine details, travel speeds, and dimensions.
- A weight table listing the weight of individual machine components.
- A list of recommended lubricants and coolants for the machine.
- Sections covering the power train, hydraulic system, and other mechanical systems with diagrams, part numbers, and maintenance standards.
The document is a service manual intended to provide technical details and maintenance guidance for repairing and servicing the Komatsu WA150PZ-5 wheel loader. It contains detailed specifications, assembly drawings, component weights,
Komatsu wa150 pz 5 wheel loader service repair manual (sn h50051 and up)fjjkekfksemmm
The document is a shop manual for a WA150PZ-5 wheel loader. It contains specifications, assembly drawings, maintenance procedures, and testing/adjusting sections for the machine. Key details include:
- The machine weighs 8,480 kg and has a 1.5 m3 bucket capacity. It is powered by a Komatsu SAA4D102E-2 diesel engine.
- Sections cover the machine's structure, testing/adjusting procedures, disassembly/assembly, and other maintenance topics.
- Specification tables list operating weights, performance data, dimensions, engine details and hydraulic system components.
- The manual provides maintenance information for systems like the engine, cooling, powert
Komatsu wa150 5 wheel loader service repair manual (sn h50051 and up)jfjkskefsmemwe
This document contains specifications and technical information for a Komatsu WA150-5H wheel loader, including:
1. Dimensions, weights, performance data, and engine specifications.
2. Lists of recommended lubricants and coolants for areas like the engine, transmission, hydraulics, axles, and cooling system.
3. Assembly drawings showing the machine layout and key dimensions.
4. Tables providing the weights of major components to aid in transport and handling.
Komatsu wa150 5 wheel loader service repair manual (sn h50051 and up)fjskekdmmmse
This document provides specifications and maintenance information for a Komatsu WA150-5H wheel loader. It includes:
- Specifications for the machine including operating weight, engine details, dimensions, performance specs and more.
- Assembly drawings showing views and key dimensions of the machine.
- A parts list with weights of major components to aid in handling and transport.
- Lubrication information including recommended oils and fluids for systems like the engine, hydraulics and axles.
- Sections covering the engine mounting, cooling system, powertrain, hydraulic piping diagrams and maintenance of components like the HST pump and motors.
Komatsu WA150-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdff8usuejkddm3e
This shop manual provides maintenance and repair information for the Komatsu WA150-5H wheel loader.
It begins with general information such as specifications, dimensions, performance data, and lubrication charts.
The bulk of the manual covers maintenance standards and procedures for the machine's major systems and components. This includes the engine mount and transfer mount, damper, cooling system, power train, drive shafts, hydraulic system piping diagram, HST pump, relief valves, HST motor, and control valves.
The manual is organized into sections covering structure and function, testing and adjustment, disassembly and assembly, and other reference information to support maintenance and repairs of the WA150-5H wheel loader.
Komatsu WA150-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdf9skemdddmmd
This document contains information about a WA150-5H excavator, including:
1. Specifications such as operating weight, engine details, dimensions, performance specifications.
2. Assembly drawings showing views and measurements of the excavator.
3. Tables listing weights of components, lubricant types and capacities.
Komatsu WA150-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfdjkkskmmmdm
This document contains information about a WA150-5H excavator, including:
1. Specifications such as operating weight, engine details, dimensions, performance specs.
2. Assembly drawings showing views and measurements of the machine.
3. Tables listing weights of components, lubricant types and capacities.
Komatsu WA150-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfhqlt81792778
This shop manual provides maintenance and repair information for the Komatsu WA150-5H wheel loader.
It begins with general information such as specifications, dimensions, performance data, and lubrication charts.
The bulk of the manual covers maintenance standards and procedures for the machine's major systems and components. This includes the engine mount and transfer mount, damper, cooling system, power train, drive shafts, hydraulic system piping diagram, HST pump, relief valves, HST motor, and control valves.
The manual is organized into sections covering structure and function, testing and adjustment, disassembly and assembly, and other reference information to support maintenance and repairs of the WA150-5H wheel loader.
Similar to Komatsu d65 wx 150e0 dozer bulldozer service repair manual (sn 69001 and up) (20)
Komatsu d21 a 8e0 dozer bulldozer service repair manual (sn 90001 and up)kksjefkksem
This document provides a table of contents for a shop manual covering specifications, maintenance standards, and repair procedures for Bulldozer models D21A-8E0 and D21P-8E0. The table of contents lists 10 chapters covering topics like engine and cooling systems, power train, undercarriage, hydraulic systems, work equipment, and electrical systems. Chapter sections include specifications, structure and function overviews, diagrams, control descriptions, removal and installation guides, and standard value tables.
This document provides information about torque settings for fasteners on JCB machines. It discusses zinc plated fasteners, Dacromet fasteners which have a silver mottled finish, and provides torque setting tables for UNF and metric fasteners under lubricated and unlubricated conditions. It also mentions torque settings for hydraulic connections and positional type hydraulic adapters.
Jcb 526 s aws telescopic handler service repair manualkksjefkksem
This service manual provides information for servicing and maintaining JCB loadall machines. It includes sections on general information like identification, torque settings, and service tools. Other sections cover specific machine components and systems such as attachments, body and framework, electrics, controls, hydraulics, transmission, brakes, steering, and engines. The manual is intended for use by trained JCB service engineers and covers safety procedures and maintenance schedules.
Jcb 526 56 telescopic handler service repair manual serial number range tbakksjefkksem
This document provides information about torque settings for fasteners on JCB machines. It discusses zinc plated fasteners, Dacromet fasteners, and the different torque values that should be used depending on the type of fastener and its surface treatment. Dacromet fasteners have a lower torque setting than zinc or yellow plated fasteners. The document provides tables of torque settings to use for zinc/yellow plated fasteners in unlubricated and lubricated conditions, and for Dacromet fasteners. It stresses that the correct torque must be used depending on the fastener type.
Jcb 526 55 telescopic handler service repair manualkksjefkksem
This service manual provides information on general safety, operating safety, maintenance safety, lubricants safety, and contains sections on identification, torque settings, service tools, and sealing compounds for JCB loadall machines. The introduction explains that the manual is designed for JCB service engineers and contains safety notices, instructions on how to use the manual, and covers machine models from serial number 277001.
Still electric fork truck forklift r60 20 series service repair manualkksjefkksem
This workshop manual provides information for maintaining electric fork trucks models R60-16 through R60-20 and R60-16i through R60-20i. It contains maintenance and repair instructions for the truck chassis and counterweights. The manual has been prepared for truck types R6030 through R6032 and supplements will be provided for any new truck types or deviations.
Still electric fork truck forklift r60 18 series service repair manualkksjefkksem
This workshop manual provides information for maintaining electric fork trucks models R60-16 through R60-20, R60-16i through R60-20i, and R6030 through R6032. It has been prepared for truck types R6030 through R6032. Supplements will be provided for any new truck types as needed. The manual describes the chassis and counterweights used on the trucks and provides their specifications and dimensions. It also provides instructions for jacking up the fork truck for maintenance work.
Still electric fork truck forklift r60 16 series service repair manualkksjefkksem
This workshop manual provides information for maintaining electric fork trucks models R60-16 through R60-20, R60-16i through R60-20i, and R6030 through R6032. It has been prepared for truck types R6030 through R6032. Supplements will be provided for any new truck types as needed. The manual describes the chassis and counterweights of the trucks and provides their dimensions and weights. It also provides instructions for jacking up the fork truck for maintenance work.
Still electric fork truck forklift r50 16 series service repair manualkksjefkksem
The document provides information about the frame and counterweight of electric forklift trucks. It describes the rigid welded steel plate chassis frame and bolted-on counterweight. The counterweight has fixing holes that pass screws with hexagonal recesses holding the power unit in place between the leg and battery compartments. The counterweight is bolted to the chassis by 4 bolts with a torque of 100 Nm each. Details are provided on the various components of the counterweight including weights ranging from 450-755 kg.
Still electric fork truck forklift r50 15 series service repair manualkksjefkksem
The document provides information about the frame and counterweight of electric forklift trucks. It describes the rigid welded steel plate chassis frame and bolted-on counterweight. The counterweight has fixing holes that pass screws with hexagonal recesses holding the power unit in place between the leg and battery compartments. The counterweight is bolted to the chassis by 4 bolts with a torque of 100 Nm each. Details are provided on the various components of the counterweight including weights ranging from 450-755 kg.
Still electric fork truck forklift r50 12 series service repair manualkksjefkksem
The document provides information about the frame and counterweight of electric forklift trucks. It describes the rigid welded steel plate chassis frame and bolted-on counterweight. The counterweight has fixing holes that pass screws with hexagonal recesses holding the power unit in place between the leg and battery compartments. The counterweight is bolted to the chassis by 4 bolts with a torque of 100 Nm each. Details are provided on the various components of the counterweight including weights ranging from 450-755 kg.
Still electric fork truck forklift r50 10 series service repair manualkksjefkksem
The document provides information about the frame and counterweight of electric forklift trucks. It describes the rigid welded steel plate chassis frame and bolted-on counterweight. The counterweight has fixing holes that pass screws with hexagonal recesses holding the power unit in place between the leg and battery compartments. The counterweight is bolted to the chassis by 4 bolts with a torque of 100 Nm each. Details are provided on the various components of the counterweight including weights ranging from 450-755 kg.
Nissan forklift p frame - pll series service repair manualkksjefkksem
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift internal combustion 1 d2 series service repair manualkksjefkksem
This document provides service information for automatic transmissions, including:
1) An overview of transmission components and oil circuit diagrams.
2) Specifications for torque converters, clutches, pumps, pressures and temperatures.
3) Troubleshooting guides and corrective actions for issues like low output, noise, leaks and more.
4) Instructions for removal, disassembly, inspection and installation of transmission parts.
Nissan forklift internal combustion 1 d1 series service repair manualkksjefkksem
This document provides service information for automatic transmissions, including:
1) An overview of transmission components and oil circuit diagrams.
2) Specifications for torque converters, clutches, pumps, pressures and temperatures.
3) Troubleshooting guides and corrective actions for issues like low output, noise, leaks and more.
4) Instructions for removal, disassembly, inspection and installation of transmission parts.
Komatsu d68 ess 12 dozer bulldozer service repair manual (sn j10001 and up)kksjefkksem
This document is a shop manual that contains specifications, maintenance procedures, and part diagrams for a Bulldozer model D68ESS-12. It includes sections on the engine and cooling system, power train, undercarriage, hydraulic system, and work equipment. The document contains detailed technical information, part numbers, diagrams, and instructions to aid in servicing and repairing the bulldozer.
Komatsu d68 ess 12 dozer bulldozer service repair manual (sn 1001 and up)kksjefkksem
This document is a shop manual that contains specifications, maintenance procedures, and part diagrams for a Bulldozer model D68ESS-12. It includes sections on the engine and cooling system, power train, undercarriage, hydraulic system, and work equipment. The document contains detailed technical information, part numbers, diagrams, and instructions to aid in servicing and repairing the bulldozer.
Komatsu d65 wx 17 dozer bulldozer service repair manualsn 1001 and upkksjefkksem
This document provides a summary of failure codes related to a bulldozer. It lists various failure codes that may appear, along with a brief description of each code and potential causes. Some examples of failure codes included are:
- [15SAL1] Forward clutch:Fill High - Indicates the forward clutch fluid level is too high.
- [CA115] Eng Ne and Bkup Speed Sens Error - Error with the engine speed and backup speed sensors.
- [CA144] Coolant Temp Sens High Error - Issue with the coolant temperature sensor reading too high.
- [CA322] Inj #1(L#1) Open/Short Error - Open or short circuit
Komatsu d65 px 17 dozer bulldozer service repair manual sn 1001 and upkksjefkksem
This document provides an index and overview of the parts and systems for a bulldozer model. It includes:
- Serial numbers for 3 bulldozer models ranging from 1001 and up.
- A table of contents that lists the sections and pages covering specifications, structure and functions, maintenance, and troubleshooting for various parts like the engine, transmission, hydraulics, undercarriage, and work equipment.
- Safety information and instructions for how to properly handle fuel, electrical, and hydraulic components when performing maintenance.
Komatsu d65 px 12 dozer bulldozer service repair manual (sn 60001 and up)kksjefkksem
This document provides the shop manual for D65E-12, D65P-12, D65EX-12, and D65PX-12 models. It includes specifications, component diagrams, testing and maintenance procedures, and safety notices. The manual is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. Safety is emphasized, with symbols used to mark important safety precautions.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Komatsu d65 wx 150e0 dozer bulldozer service repair manual (sn 69001 and up)
1. SEBM040800
Shop
Manual
D65WX-15EO
POWER ANGLE POWER TILT DOZER
SERIAL NUMBERS D65WX-15E0 69001 and up
This material is proprietary to Komatsu America Corp. and is not to be reproduced, used, or disclosed except in
accordance with written authorization from Komatsu America Corp.
It is our policy to improve our products whenever it is possible and practical to do so. We reserve the right to
make changes or improvements at any time without incurring any obligation to install such changes on products
sold previously.
Due to this continuous program of research and development, revisions may be made to this publication. It is
recommended that customers contact their distributor for information on the latest revision.
Copyright 2007 Komatsu
Printed in U.S.A.
Komatsu America Corp.
May 2007
2. D65WX-15E0 1
CONTENTS
No. of page
General
Specification dimensions .................................................................................................... 2
Specifications...................................................................................................................... 3
Weight table........................................................................................................................ 8
Structure, Function and Maintenance Standard
Frame assembly .................................................................................................................10
Track frame, recoil spring ................................................................................................... 12
Hydraulic cylinder ..............................................................................KA charge is contained
PPC valve........................................................................................................................... 16
Control valve....................................................................................................................... 22
Self pressure reducing valve .............................................................................................. 50
Work equipment..................................................................................................... KA charge
Cutting edge, end bit ............................................................................................. KA charge
Others
Hydraulic circuit diagram
Work equipment hydraulic circuit diagram (For PAT dozer) ............................................. 57
3. 2 D65WX-15E0
GENERAL SPECIFICATION DIMENSIONS
SPECIFICATION DIMENSIONS
D65WX-15E0 PAT dozer with ROPS guard, cab, and air conditioner
Item Unit D65WX-15E0
Machine weight kg 21,670
Engine name — Komatsu SAA6D114E-3 diesel engine
Rated engine output kW {HP}/rpm 153 {205}/1,950 (Net)
A Overall length mm 5,590
B Overall height (excluding antenna) mm 3,220
C Overall width mm 3,800
Travel speed
(1st/2nd/3rd gear speed)
Forward km/h 3.3/6.3/10.1
Reverse km/h 4.4/8.2/12.9
aPAT : Abbreviation for Power Angle power Tilt
4. D65WX-15E0 3
GENERAL SPECIFICATIONS
Machine name and type
D65WX-15E0
PAT dozer
Serial number 69001 and up
Weight
Machine weight
• Bare tractor kg 18,190
• With work equipment kg 20,940
• With work equipment and ROPS cab kg 21,670
• With work equipment, ripper, and ROPS cab kg (23,350)
Performance
Min. swing radius m — [Pivot turn]
Gradeability deg. 30
Stability (Front, rear, left, right) deg. 35
Travelspeed
Forward 1st km/h 3.3
Forward 2nd km/h 6.3
Forward 3rd km/h 10.1
Reverse 1st km/h 4.4
Reverse 2nd km/h 8.2
Reverse 3rd km/h 12.9
Groundpressure
Tractor unit
kPa
{kg/cm2
}
45.4
(0.46)
With work equipment
kPa
{kg/cm2
}
52.2
(0.53)
With work equipment and ROPS cab
kPa
{kg/cm2
}
54.0
(0.55)
With work equipment, ripper, and ROPS cab
kPa
{kg/cm2
}
58.2
(0.59)
Dimensions
Overall
length
Tractor unit mm 4,335
With work equipment mm 5,590
Overall
width
Tractor unit mm 2,710
With work equipment mm 3,800
Overallheight
Up to exhaust pipe mm 2,990
Up to top of operator’s seat mm 2,315
When ROPS cab is installed (excluding antenna) mm 3,220
When ROPS canopy is installed mm 3,220
When cab is installed (excluding antenna) mm 3,080
Track gauge mm 2,050
Length of track on ground mm 2,980
Track width (Standard track shoe) mm 660
Minimum ground clearance mm 405
aPAT : Abbreviation for Power Angle power Tilt
aValues in ( ) are shown for reference.
SPECIFICATIONS
5. 4 D65WX-15E0
GENERAL SPECIFICATIONSEngine
Name SAA6D114E-3
Type
4-cycle, water-cooled, in-line, vertical,
direct-injection, with turbocharger and
air-cooled aftercooler
Number of cylinders – bore x stroke mm 6 – 114 x 135
Total displacement l {cc} 8.27 {8,270}
Performance
Flywheel horsepower
kW/rpm
{HP/rpm}
153/1,950 {205/1,950} (Net)
Max. torque
Nm/rpm
{kgm/rpm}
1,012/1,450 {103/1,450} (Gross)
High idle speed under no load rpm 2,030 ± 50
Low idle speed under no load rpm 825 ± 25
Min. fuel consumption ratio
g/kWh
{g/HPh}
227 {169}
Starting motor 24 V, 7.5 kW
Alternator 24 V, 60 A
Battery (*1) 12 V, 112 Ah, 2 units (145F51)
Type of radiator core Corrugated aluminum, 8.0/2
Powertrain
Torque converter 3-element, 1-stage, 1-phase type
Transmission
Planetary gear, multiple disc, hydraulic, gear
pump forced lubrication, 3 forward/reverse gear
speeds, manual electronic type
Bevel gear shaft
Spiral bevel gear, gear pump forced
lubrication type
HSSunit
HSS
Differential planetary gear, hydraulic motor drive,
manual electronic, hydraulic type
Brake
Wet multiple disc, spring-boosted, foot-operated,
hydraulic type
Final drive
1-stage spur gear/1-stage planetary gear
reduction, splash lubrication type
Undercarriage
Type of suspension Semi-hard, equalizing beam type
Carrier roller 2 pieces on each side
Track roller 8 pieces on each side
Track shoe Width: 660 mm
42 pieces on each side
Pitch: 203.2 mm• Assembly type single grouser shoe
aPAT : Abbreviation for Power Angle power Tilt
*1 : The battery capacity (Ah) is on 5-hours rate.
Machine name and type
D65WX-15E0
PAT dozer
Serial number 69001 and up
6. D65WX-15E0 5
GENERAL SPECIFICATIONS
Hydraulicsystem
Hydraulicpump
HSS pump HPV95, variable-capacity piston,
load sensing type
112
• Type
• Theoretical capacity cm3
/rev
Cooling fan pump
LPV30, variable-capacity piston type
30
• Type
• Theoretical capacity cm3
/rev
Power train and lubricating oil pump
SAL (2) 45 + 45, gear type (Tandem)
43.7 x 2
• Type
• Theoretical capacity cm3
/rev
Scavenging pump
Gear type
61.2
• Type
• Theoretical capacity cm3
/rev
Hydraulicmotor
HSS motor HMF95, fixed-capacity piston type
with brake valve
96
• Type
• Motor capacity cm3
/rev
Cooling fan motor
LMF28, fixed-capacity piston type
28
• Type
• Motor capacity cm3
/rev
Controlvalve
Type and quantity
5-spool type, 1 piece
(Ripper: Provision)
Control method Hydraulic assist type
Hydraulic tank Box type (External control valve type)
Hydraulic oil filter Return side of tank
Oil cooler Air-cooled type (3A-CS)
aPAT : Abbreviation for Power Angle power Tilt
Machine name and type
D65WX-15E0
PAT dozer
Serial number 69001 and up
7. 6 D65WX-15E0
GENERAL SPECIFICATIONSWorkequipmenthydraulicsystem
Liftcylinder
Type Double-acting piston type
Cylinder bore mm 95
Piston rod diameter mm 65
Stroke mm 1,140
Max. distance between pins mm 1,780
Min. distance between pins mm 640
Tiltandpitchcylinder
Type KA charge
Cylinder bore mm
Piston rod diameter mm
Stroke mm
Max. distance between pins mm
Min. distance between pins mm
Anglecylinder
Type KA charge
Cylinder bore mm
Piston rod diameter mm
Stroke mm
Max. distance between pins mm
Min. distance between pins mm
Rippercylinder
Type Double-actiong piston type
Cylinder bore mm 140
Piston rod diameter mm 70
Stroke mm 330
Max. distance between pins mm 1,080
Min. distance between pins mm 750
Workequipment
Type Power angle Power tilt dozer
Left and Right: Angle cylinder
Right: Tilt cylinderBlade supporting method
Performance
Max. lift (above ground) mm 1,170
Max. drop (below ground) mm 810
Max. tilting distance mm 920
Blade angle range deg. —
Dimensions
Blade width mm 3,800
Blade height mm 1,210
Blade angle deg. KA Charge
aPAT : Abbreviation for Power Angle power Tilt
Machine name and type
D65WX-15E0
PAT dozer
Serial number 69001 and up
8. D65WX-15E0 7
GENERAL SPECIFICATIONS
Ripper
Type Parallelogram
Beam length mm 2,170
Number of shanks piece 3
Performance
Digging angle (A/B) deg. 55/45
Digging depth Changeable to 3 levels
Max. digging depth mm 595
Max. lift mm 640
Shank position (Left/Right) mm 950/950
aPAT : Abbreviation for Power Angle power Tilt
Machine name and type
D65WX-15E0
PAT dozer
Serial number 69001 and up
9. 8 D65WX-15E0
GENERAL WEIGHT TABLE
Unit: kg
Machine name and type
D65WX-15E0
PAT dozer
Serial number 69001 and up
Engine and damper assembly (Excluding coolant and oil) 1,000
• Engine assembly 860
• Damper assembly 48
• Engine-related parts (Wiring, mount) 45
Universal joint 21
Cooling assembly (Excluding coolant and oil) 125
• Radiator assembly 27
• Aftercooler assembly 21
• Hydraulic oil cooler 3
Cooling fan pump 28
Cooling fan motor 13
Fuel tank (Excluding fuel) 200
Power train unit assembly (Excluding oil) 1,435
• Torque converter and PTO assembly 290
• Transmission assembly 340
• Transmission ECMV assembly 13
• Main relief valve assembly 6
• HSS unit assembly 710
• Brake valve assembly 6
HSS motor 45
HSS pump 65
Power train and lubrication oil pump 20
Scavenging pump 5
Hydraulic tank (Excluding oil) 75
Control valve
• 5-spool valve (Ripper: Provision) 115
Final drive assembly (Each side) 790
Sprocket (Each side) 8.3 x 9
Frame assembly 2,450
Engine underguard 140
Transmission underguard 30
aPAT : Abbreviation for Power Angle power Tilt
WEIGHT TABLE
k This weight table is for reference in handling or transporting components.
10. D65WX-15E0 9
GENERAL WEIGHT TABLE
Undercarriage assembly (Each side) 1,570
• Track frame 610
• Idler assembly (Each side) 200
• Recoil spring assembly (Each side) 250
• Single flange track roller assembly (Each side) 54 x 6
• Double flange track roller assembly (Each side) 61 x 2
• Carrier roller assembly (Each side) 30 x 2
Track shoe assembly (Each side)
• Single grouser shoe (660 mm) 1,675
Pivot shaft (Each side) 100
Equalizer bar 145
Floor frame assembly 300
Operator seat 59
Cab assembly 410
ROPS guard assembly (for cab) 220
ROPS canopy assembly 410
PAT dozer assembly 2,750
• Blade 1,250
• U-frame 1,250
• Angle cylinder 80 x 2
• Tilt cylinder 85
Lift cylinder assembly 95 x 2
Ripper assembly 1,530
Ripper cylinder assembly 75
aPAT : Abbreviation for Power Angle power Tilt
Unit: kg
Machine name and type
D65WX-15E0
PAT dozer
Serial number 69001 and up
12. D65WX-15E0 11
STRUCTURE, FUNCTION AND
MAINTENANCE STANDARD FRAME ASSEMBLY
3. Frame assembly
4. Undercover
5. Engine mount
6. Power train unit mount
7. Trunnion
Outline
• Frame assembly (3) has a hull frame structure,
on which the radiator guard, main frame, steer-
ing case, and transmission guard are assembled
into 1 unit.
Unit: mm
No. Check item Criteria Remedy
1
Clearance between cylinder yoke
and bushing (Large)
Standard
size
Tolerance Standard
clearance
Clearance
limit
Replace bushing
Shaft Hole
85
–0.036
–0.090
+0.207
+0.120
0.156 –
0.297
0.5
2
Clearance between cylinder yoke
and bushing (Small)
65
–0.030
–0.076
+0.174
+0.100
0.130 –
0.250
0.5
13. 12 D65WX-15E0
STRUCTURE, FUNCTION AND
MAINTENANCE STANDARD TRACK FRAME, RECOIL SPRING
TRACK FRAME, RECOIL SPRING
D65WX-15E0 (For PAT dozer)
aPAT : Abbreviation for Power Angle power Tilt
1. Idler
2. Carrier roller
3. Track frame
4. Sprocket teeth
5. Track roller guard
6. Track roller
7. Yoke
8. Seal
9. Piston
10. Recoil spring
11. Wear ring
12. U-packing
13. Cabin
14. Nut
15. Lubricator
16. Cylinder
17. Bushing
18. Holder
14. D65WX-15E0 13
STRUCTURE, FUNCTION AND
MAINTENANCE STANDARD TRACK FRAME, RECOIL SPRING
Outline
• Recoil spring (10) is used to adjust the track
shoe tension by supplying grease through lubri-
cator (15) or discharge existing grease and mov-
ing piston (9) forward or in reverse. It also damps
sudden shocks applied to idler (1).
S: Single flange
D: Double flange
aPAT : Abbreviation for Power Angle power Tilt
Unit: mm
No. Check item Criteria Remedy
19 Deformation of track frame
Item Repair limit
RepairBend
Twist
Opening of idler
7 (in length of 3,000)
3 (in length of 300)
5
20 Recoil spring
Standard size Repair limit
Replace
Free length x
Outside diameter
Installed length Installed load Free length Installed load
791.5 x 239 634
189.5 kN
{19,320 kg}
772
168.6 kN
{17,195 kg}
21
Clearance between piston and
bushing
Standard
size
Tolerance Standard
clearance
Clearance
limit
Replace bushing
Shaft Hole
90
–0.039
–0.090
+0.270
+0.061
0.100 –
0.360
1.0
22 Press fitting force of idler yoke 392 kN {40 ton} Adjust
— Quantity of grease 140 cc (Grease: G2-LI) —
Q’ty on
each side
Flange type and arrangement
D65WX-15E0
(For PAT dozer)
8 pcs. S, S, D, S, S, D, S, S
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. 14 D65WX-15E0
STRUCTURE, FUNCTION AND
MAINTENANCE STANDARD HYDRAULIC CYLINDER
HYDRAULIC CYLINDER
For power angle power tilt dozer
LIFT CYLINDER
TILT CYLINDER
ANGLE CYLINDER
KA Charge
KA Charge
17. D65WX-15E0 15
STRUCTURE, FUNCTION AND
MAINTENANCE STANDARD HYDRAULIC CYLINDER
RIPPER LIFT CYLINDER
Unit: mm
No. Check item Criteria Remedy
1
Clearance between piston rod
and bushing
Cylinder
name
Standard
size
Tolerance Standard
clearance
Clearance
limit
Replace
bushing
Shaft Hole
Lift 65
–0.030
–0.104
+0.262
+0.067
0.097 –
0.366
0.666
Tilt
Angle
Ripper 70
–0.025
–0.087
+0.271
+0.075
0.105 –
0.375
0.675
2
Spherical clearance between
piston rod and trunnion
Lift S 85
–0.2
–0.3
+0.3
0
0.2 – 0.5 1.0 Adjust shim
or replace
Tilt
Angle
Clearance between piston rod
support shaft and bushing
Ripper 75
–0.030
–0.076
+0.174
+0.100
0.130 –
0.250
1.0
Replace
bushing
3
Clearance between cylinder
boss and bushing
Lift 55
–0.100
–0.174
+0.116
0
0.100 –
0.290
1.0
Clearance between cylinder
bottom support shaft and
bushing
Tilt
Angle
Ripper 75
–0.030
–0.076
+0.174
+0.100
0.130 –
0.250
1.0
4
Tightening torque of cylinder
head
Lift 735 ± 74.0 Nm {75.0 ± 7.5 kgm}
Retighten
Tilt
Angle
Tightening torque of cylinder
head mounting bolt
Ripper 162 ± 14.7 Nm {16.5 ± 1.5 kgm}
5
Tightening torque of cylinder
piston clamping nut
Lift 1.08 ± 0.11 kNm {110 ± 11.0 kgm} (Width across flats: 50 mm)
Tilt
Angle
Ripper 3.97 ± 0.40 kNm {405 ± 40.5 kgm} (Width across flats: 80 mm)