Diesel jaw crusher
•Download as DOC, PDF•
0 likes•6 views
This document provides information about two diesel jaw crusher models: the PED150×250 and the PED250×400. It lists the key specifications of each model including their feed size, discharging size, capacity, power requirements, weight, dimensions, and ex-works price. Contact information is also provided for the website and representatives.
Report
Share
Report
Share
Recommended
Impact crusher
The document summarizes technical parameters for several models of impact crushers, including rotor specifications, maximum feed size, capacity range, power requirements, weight, and overall dimensions. Capacities range from 15-310 tons per hour depending on the model. Power requirements range from 45-315 kW. Weights range from 8.1-27.5 tons. Overall dimensions vary in length from 2210-3280 mm, width from 1490-3570 mm, and height from 2660-2920 mm depending on the specific model.
T185 (3)
The document provides specifications for KAUP Carrying Rams T185, steel tube versions that are used to transport materials wound on cores by forklift trucks. Rams range in capacity from 4 to 80 tons and are directly mounted to fork carriages starting at 12 tons capacity using pin-type mounting. Key qualities include the steel construction with high tensile and yield strength, solid design, and optional polyurethane coating. Technical data is provided on dimensions and weights for each model size.
Pev Jaw Crusher-Shanghai Lipu
1. The document introduces the PEV series of European jaw crusher, which is a new product that absorbs world advanced technology and has a larger capacity and crushing ratio than traditional jaw crushers.
2. The PEV crusher uses a symmetrical deep crushing chamber, 3D software optimization, and an integrated bearing seat to increase capacity by over 30% while reducing weight.
3. The crusher allows for adjustable discharge sizes between 25-50 mm or 25-150 mm depending on the model, and has capacities ranging from 20-600 tons per hour powered by motors from 37-160 kW.
Accurate Simulation of Short-Fiber-Reinforced Automotive Parts
This document discusses accurate simulation of short-fiber reinforced automotive parts using anisotropic material models. It summarizes:
- Short-fiber reinforced plastics exhibit anisotropic material properties depending on fiber orientation that varies across parts due to injection molding flow.
- The software Converse can incorporate fiber orientation data from injection molding simulations to define orthotropic material models element-by-element for structural analysis.
- Case studies show Converse anisotropic models improve correlation with experiments for frequency response and deformation compared to isotropic assumptions.
- Variations in fiber orientation between identical parts from different suppliers can lead to large differences in stiffness, highlighting the importance of accurate material modeling.
Stone jaw crusher for sale
Stone Jaw Crusher for sale
The ORIENTAL Jaw Crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa.
Features of Oriental Jaw Crusher
● Simple structure, easy maintenance;
● High crushing ratio, even output granularity;
● High reliability, low investment;
● Low noise, less dust.
Technical data of Oriental Jaw Crusher
Model Feed Opening Size (mm) Max. Feeding Size (mm) Adjustable Range of Output Size (mm) Capacity (t/h) Motor Power (kw) Weight (t) Overall Dimension (mm)
PE250×400 250×400 200 20-50 5-20 15 2.9 1430×1310×1340
PE400×600 400×600 350 40-100 15-60 30-37 6.8 1700×1732×1653
PE500×750 500×750 425 50-100 40-100 45-55 11.2 2035×1921×2000
PE600×900 600×900 480 65-160 60-140 55-75 16.5 2290×2206×2370
PE750×1060 750×1060 630 80-150 80-230 90-110 29 2655×2302×3110
PE900×1200 900×1200 750 95-165 140-320 110-132 54.5 3789×3050×3025
PE1000×1200 1000×1200 850 105-185 180-400 160-200 56.5 3900×3320×3280
PE1200×1500 1200×1500 1020 150-300 250-800 220-250 99.6 4300×3540×4043
PEX150×250 150×250 125 10-40 1-3 5.5 0.85 896×745×935
PEX150×750 150×750 125 12-45 5-16 15 3.8 1205×1495×1203
PEX250×750 250×750 210 25-60 10-40 22-30 5 1667×1545×1020
PEX250×1000 250×1000 210 25-60 15-50 30-37 6.8 1964×1550×1380
PEX250×1200 250×1200 210 25-60 20-60 37-45 8.5 2192×1605×1415
PEX400×1200 400×1200 320 35-95 28-95 45-55 11.7 2256×2100×1960
JCE1302 180×1300 150 10-30 12-50 30-37 6 1320×2150×1175
JCE1003 250×1000 220 20-40 15-65 30-37 5.6 1400×1850×1310
JCE1303 250×1300 220 20-40 26-85 37-45 6.8 1450×2150×1175
JCE604 400×600 350 35-85 15-85 30-37 10 1920×1460×1840
http://www.orientalcrusher.com/ver2.0/Jaw-Crusher.html
Staircase detail layout1
This document contains floor plans and structural details for a multi-level building. It includes:
- Typical floor plans showing stair locations and dimensions with 250mm treads and 172mm risers. Floor levels are at 6000mm intervals from ground level.
- Elevation view (Section A-A') showing stair and floor locations.
- Details of stair construction including ISMC 200 steel sections, rebar, and concrete bed blocks.
- Paneling detail for stair risers showing 12mm plywood with laminate on both sides.
S9 leg-press
This document provides technical specifications for two gym machines, the S9-Leg Press and S9-Shoulder Press. The S9-Leg Press dimensions are 2087 * 1110 * 1614mm and weighs 275kg with a 100kg weight stack. The S9-Shoulder Press dimensions are 1885 * 1321 * 1653mm and weighs 240kg also with a 100kg weight stack.
S9 shoulder-press
This document provides technical specifications for two gym machines: an S9-Leg Press and S9-Shoulder Press. The Leg Press dimensions are 2087 * 1110 * 1614mm with a 275kg net weight and 100kg weight stack. The Shoulder Press dimensions are 1885 * 1321 * 1653mm with a 240kg net weight and also a 100kg weight stack.
Recommended
Impact crusher
The document summarizes technical parameters for several models of impact crushers, including rotor specifications, maximum feed size, capacity range, power requirements, weight, and overall dimensions. Capacities range from 15-310 tons per hour depending on the model. Power requirements range from 45-315 kW. Weights range from 8.1-27.5 tons. Overall dimensions vary in length from 2210-3280 mm, width from 1490-3570 mm, and height from 2660-2920 mm depending on the specific model.
T185 (3)
The document provides specifications for KAUP Carrying Rams T185, steel tube versions that are used to transport materials wound on cores by forklift trucks. Rams range in capacity from 4 to 80 tons and are directly mounted to fork carriages starting at 12 tons capacity using pin-type mounting. Key qualities include the steel construction with high tensile and yield strength, solid design, and optional polyurethane coating. Technical data is provided on dimensions and weights for each model size.
Pev Jaw Crusher-Shanghai Lipu
1. The document introduces the PEV series of European jaw crusher, which is a new product that absorbs world advanced technology and has a larger capacity and crushing ratio than traditional jaw crushers.
2. The PEV crusher uses a symmetrical deep crushing chamber, 3D software optimization, and an integrated bearing seat to increase capacity by over 30% while reducing weight.
3. The crusher allows for adjustable discharge sizes between 25-50 mm or 25-150 mm depending on the model, and has capacities ranging from 20-600 tons per hour powered by motors from 37-160 kW.
Accurate Simulation of Short-Fiber-Reinforced Automotive Parts
This document discusses accurate simulation of short-fiber reinforced automotive parts using anisotropic material models. It summarizes:
- Short-fiber reinforced plastics exhibit anisotropic material properties depending on fiber orientation that varies across parts due to injection molding flow.
- The software Converse can incorporate fiber orientation data from injection molding simulations to define orthotropic material models element-by-element for structural analysis.
- Case studies show Converse anisotropic models improve correlation with experiments for frequency response and deformation compared to isotropic assumptions.
- Variations in fiber orientation between identical parts from different suppliers can lead to large differences in stiffness, highlighting the importance of accurate material modeling.
Stone jaw crusher for sale
Stone Jaw Crusher for sale
The ORIENTAL Jaw Crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa.
Features of Oriental Jaw Crusher
● Simple structure, easy maintenance;
● High crushing ratio, even output granularity;
● High reliability, low investment;
● Low noise, less dust.
Technical data of Oriental Jaw Crusher
Model Feed Opening Size (mm) Max. Feeding Size (mm) Adjustable Range of Output Size (mm) Capacity (t/h) Motor Power (kw) Weight (t) Overall Dimension (mm)
PE250×400 250×400 200 20-50 5-20 15 2.9 1430×1310×1340
PE400×600 400×600 350 40-100 15-60 30-37 6.8 1700×1732×1653
PE500×750 500×750 425 50-100 40-100 45-55 11.2 2035×1921×2000
PE600×900 600×900 480 65-160 60-140 55-75 16.5 2290×2206×2370
PE750×1060 750×1060 630 80-150 80-230 90-110 29 2655×2302×3110
PE900×1200 900×1200 750 95-165 140-320 110-132 54.5 3789×3050×3025
PE1000×1200 1000×1200 850 105-185 180-400 160-200 56.5 3900×3320×3280
PE1200×1500 1200×1500 1020 150-300 250-800 220-250 99.6 4300×3540×4043
PEX150×250 150×250 125 10-40 1-3 5.5 0.85 896×745×935
PEX150×750 150×750 125 12-45 5-16 15 3.8 1205×1495×1203
PEX250×750 250×750 210 25-60 10-40 22-30 5 1667×1545×1020
PEX250×1000 250×1000 210 25-60 15-50 30-37 6.8 1964×1550×1380
PEX250×1200 250×1200 210 25-60 20-60 37-45 8.5 2192×1605×1415
PEX400×1200 400×1200 320 35-95 28-95 45-55 11.7 2256×2100×1960
JCE1302 180×1300 150 10-30 12-50 30-37 6 1320×2150×1175
JCE1003 250×1000 220 20-40 15-65 30-37 5.6 1400×1850×1310
JCE1303 250×1300 220 20-40 26-85 37-45 6.8 1450×2150×1175
JCE604 400×600 350 35-85 15-85 30-37 10 1920×1460×1840
http://www.orientalcrusher.com/ver2.0/Jaw-Crusher.html
Staircase detail layout1
This document contains floor plans and structural details for a multi-level building. It includes:
- Typical floor plans showing stair locations and dimensions with 250mm treads and 172mm risers. Floor levels are at 6000mm intervals from ground level.
- Elevation view (Section A-A') showing stair and floor locations.
- Details of stair construction including ISMC 200 steel sections, rebar, and concrete bed blocks.
- Paneling detail for stair risers showing 12mm plywood with laminate on both sides.
S9 leg-press
This document provides technical specifications for two gym machines, the S9-Leg Press and S9-Shoulder Press. The S9-Leg Press dimensions are 2087 * 1110 * 1614mm and weighs 275kg with a 100kg weight stack. The S9-Shoulder Press dimensions are 1885 * 1321 * 1653mm and weighs 240kg also with a 100kg weight stack.
S9 shoulder-press
This document provides technical specifications for two gym machines: an S9-Leg Press and S9-Shoulder Press. The Leg Press dimensions are 2087 * 1110 * 1614mm with a 275kg net weight and 100kg weight stack. The Shoulder Press dimensions are 1885 * 1321 * 1653mm with a 240kg net weight and also a 100kg weight stack.
GOKART PROJECT
The document provides specifications for an electric vehicle including:
- Dimensions of 70 inches long, 55 inches wide, with a 45 inch wheelbase and 35 inch track.
- The roll cage is made of AISI 1018 steel that is 1 inch in diameter and 3mm thick.
- It has a 12 kg roll cage, 170 kg total mass, 1 inch ground clearance, and can reach speeds of 65 kmph.
- Finite element analysis was conducted and showed maximum deformations of 0.67mm on front impact and 0.13mm on rear impact.
- Ergonomics and safety aspects are maintained with a spacious cockpit and components within reach.
- The braking system can
Basalt and scoria grinding plant
This document provides a commercial offer for a 5TPH basalt and scoria grinding plant. It includes a list of 10 equipment items with specifications, photos, and prices totaling $59,509. The client's requirements are a capacity of 5 tons per hour with a feeding size of 1-50mm and discharging size of 40-80 microns. Delivery time is estimated at 35 days. Contact information is provided for further questions.
LIK SANG Presentation (waste paper baler) worldwide
Lik Sang Machinery Manufacture Ltd is a premier Chinese machinery manufacturer with over 37 years of experience. It has factories in Dongguan, China and Bangkok, Thailand with over 200 employees. The company manufactures baling machines and recycling equipment and has sold over 1,000 machines worldwide. It specializes in automatic baling presses and offers various models from 135-500 tons per hour.
Elevator pitch
WeighMach Ltd presented a product specification and financial details for a new machinery product. The document outlines the fixed costs, materials costs, labor costs, electricity costs, commission costs, and miscellaneous expenses to total over 5 million per year. The projected productivity is 20 machines per day to yield over 6,000 machines per year. With a selling price of $900 per unit, total earnings are projected to be over $4.4 million in the first year, resulting in a loss of over $860,000. The break-even point is estimated to be 1.19 years.
Total cost 50000pcs for Auto bricks plant hoffman kiln by cbecl
1. The document provides a list of equipment for a brick making production line with a capacity of 50,000 pieces per day, including feeders, crushers, mixers, extruders, conveyors, and other machinery.
2. It then lists additional equipment for the block forming and drying processes, including cutters, dry cars, pushers, exhaust fans, tractors, and trailers.
3. Finally, it provides a materials list for the kiln, including fire mouths, valves, gates, and refractory materials, and calculates the total cost of the production line, machinery, labor, and materials.
F-Grind V Surface Grinding Machine
The grinding spindle runs in heavy-duty, preloaded angular contact ball bearings
Automatic feed in X/Y/Z
High positioning accuracy of the vertical axis by AC servo motor in conjunction with recirculating ball screw
Programmable feed of the vertical axis (AD5)
Rapid traverse to the desired working height
Rough and finish parameters are adjustable
Hydraulic table movement in the longitudinal axis
Double V guides for the cross travel
Table guideways are hardened, ground and PTFE (polytetrafluoroethylene) coated for very high wear resistance
Combination of flat and V-guides for the table longitudinal feed
High table load capacity for heavy workpieces
Commonwealth Games Village Complex
This document provides pricing information for apartments in the Commonwealth Games Village Complex in Delhi. It lists the net basic sale price for 2 BHK, 3 BHK, 4 BHK and 5 BHK units, along with additional charges for parking and other fees. A construction linked payment plan is then outlined, with percentages due at various stages from booking to possession. Location-based premium prices are also listed.
Equal percentage calculation
This document discusses the relationship between valve opening percentage and flow for an equal percentage valve. It provides the formula Q = Q0 * e^bY, where Q is the flow, Q0 is the initial flow, Y is the valve opening percentage, and b is a constant determined by the maximum flow. The document then applies this formula using sample values and graphs the resulting flow at each 10% valve opening from 10-100%.
Milling 101: Formulas for milling operations
This document provides formulas for calculating key metrics for milling operations:
1) It gives formulas for calculating cutting speed (Vc), spindle speed (n), and feed per tooth (fz) based on cutting diameter, spindle speed, and other parameters.
2) It also provides formulas for calculating metal removal rate (Q), table feed speed (Vf), torque (Mc), net power requirement (Pc), and defines other terms used in milling.
3) Additional details and definitions for terms used in the formulas are available by clicking on the provided link.
Catalog v12.1
Innovative Engineers is a manufacturer and supplier of high quality material handling equipment that was founded in 1995. The company has grown to become a prominent provider in the industry. Innovative Engineers is committed to quality and has qualified engineers to provide technological expertise and ISO 9001-2008 compliant processes. The company's vision is to make material handling easier through innovative ideas. The document then provides specifications for several of Innovative Engineers' product lines, including pallet trucks, stackers, scissor lifts, and dock levelers.
30,000lb-40,000lb Capacity Rigger Lift Forklift For Sale call 616 200-4308
30,000lb. to 40,000lb. Capacity Rigger Lift Forklift
Year: 2008
Capacity: 30,000lbs. to 40,000lbs. @ 24″ Load Center
Model: RC30/40
Serial: 0408-RC3040-04
Hours: 2,433
Equipped With:
Boom
Fresadora Ouplan Steel
The document describes several CNC router models from Ouplan with varying working dimensions from 1100x1100mm to 4100x2100mm. The routers are built from iron and aluminum for rigidity and can be equipped with optional accessories like an automatic tool changer, tangential knife, and crop mark reader. They are suitable for cutting and engraving a variety of materials like wood, acrylic, aluminum, and softer materials using optional cutting knives. The routers have 3 interpolated axes as standard but can be extended to 4 axes.
Arreyadi - Ratecard 2013
This document contains the rate card and technical specifications for advertising in the Arreyadi newspaper in Saudi Arabia for 2013. It lists the prices for various ad sizes and placements in both full color and black and white. It provides the rates for full pages, half pages, quarter pages, and special placements like front page, inside covers, and double page spreads. It also includes specifications for file formats, resolutions, and technical requirements. The final section outlines terms, conditions, pricing and contact information for special operations and loose inserts.
Star engineering solution
The document provides cost details for various departments of Star Engineering Company including labor, materials, rent, depreciation, taxes, power, salaries and other expenses. It then allocates these costs to different production departments and calculates the overhead rate per hour.
500 600kg feed pellet line
This document provides contact information for a feed pellet production line supplier and details of a 500-600KG/H line. It lists the equipment included, such as material receiving, conveying, mixing, pelletizing, cooling, and storage systems. The total price is $26,800 FOB from Tianjin port, China. Terms include a 30% down payment, 70% prior to delivery, with technicians provided for installation and training.
Pin mill
The Pin Mill is an impact pulverizer that can finely grind materials ranging from a millimeter to 30 micrometers in size. It has a convertible pulverization knife and different styles of rotors and sieves that allow it to pulverize low to medium hardness materials. The Pin Mill is suitable for use in many industries like food, chemicals, medicine, plastics and can adjust the fineness of the material based on blade design, rotation speed, and power. Material is fed into the milling chamber and impacted by a high-speed rotating beater between the screen and beater to be pulverized into powder, which is then separated by the screen.
Wet pan mill
The Wet Pan Mill is a type of grinding machine that is praised for its low costs, high production capacity, efficiency and ease of use. It can be used instead of a ball mill for medium and small scale operations. The Wet Pan Mill grinds materials through the rotation of its pan and uses water during the grinding process. Regular maintenance such as adding lubricant, checking bolts and replacing damaged bearings is required to keep the Wet Pan Mill functioning properly. It comes in several models with different specifications depending on the input size and power required.
500kg per hour,4ton per day, wood pellet machine
This commercial offer summarizes the configuration and pricing for a 500KG wood pellet production line. The line includes equipment for wood chipping, drying, grinding, pelletizing, screening, packing, and control systems. The total EXW price is $38,616. Payment terms include a 30% deposit, with the balance due before shipping, and a one-year warranty on equipment. Contact information is provided to inquire further about the products.
Jigging machine quotation
This document is a commercial offer for a jigging machine to process fluorite. It presents details on several jigging machine models including specifications like stroke, stroke times, feeding size, handling capacity, and power requirements. The model LTA1010/2 is recommended for the customer's needs and is offered at a price of $5900 CIF to Bandar Abbas, Iran. Additional information provided includes usage, advantages, and technical parameters of the machines.
150 tpd finnished copper beneficiation plant
The document is a commercial offer for a 150TPD copper beneficiation plant from a Chinese company. It includes equipment specifications and pricing, technical services, after-sales support, and an introduction to the company. The total cost of the plant is $469,844.27. The company offers installation support, training, maintenance, and has experience exporting similar plants to over 80 countries.
Coal crushing and drying solution
This document is a commercial offer from Evita Lee to Mr. Waleed for equipment including a rotary dryer, belt conveyors, roller crusher, bucket elevator, and spare parts for a total price of $166,858 USD. The equipment will be delivered within 20-25 days of receiving prepayment. The seller guarantees the quality of the machines for one year and will provide installation and debugging by technical engineers at the buyer's site at a cost of $60 USD per engineer per day paid by the buyer.
More Related Content
What's hot
GOKART PROJECT
The document provides specifications for an electric vehicle including:
- Dimensions of 70 inches long, 55 inches wide, with a 45 inch wheelbase and 35 inch track.
- The roll cage is made of AISI 1018 steel that is 1 inch in diameter and 3mm thick.
- It has a 12 kg roll cage, 170 kg total mass, 1 inch ground clearance, and can reach speeds of 65 kmph.
- Finite element analysis was conducted and showed maximum deformations of 0.67mm on front impact and 0.13mm on rear impact.
- Ergonomics and safety aspects are maintained with a spacious cockpit and components within reach.
- The braking system can
Basalt and scoria grinding plant
This document provides a commercial offer for a 5TPH basalt and scoria grinding plant. It includes a list of 10 equipment items with specifications, photos, and prices totaling $59,509. The client's requirements are a capacity of 5 tons per hour with a feeding size of 1-50mm and discharging size of 40-80 microns. Delivery time is estimated at 35 days. Contact information is provided for further questions.
LIK SANG Presentation (waste paper baler) worldwide
Lik Sang Machinery Manufacture Ltd is a premier Chinese machinery manufacturer with over 37 years of experience. It has factories in Dongguan, China and Bangkok, Thailand with over 200 employees. The company manufactures baling machines and recycling equipment and has sold over 1,000 machines worldwide. It specializes in automatic baling presses and offers various models from 135-500 tons per hour.
Elevator pitch
WeighMach Ltd presented a product specification and financial details for a new machinery product. The document outlines the fixed costs, materials costs, labor costs, electricity costs, commission costs, and miscellaneous expenses to total over 5 million per year. The projected productivity is 20 machines per day to yield over 6,000 machines per year. With a selling price of $900 per unit, total earnings are projected to be over $4.4 million in the first year, resulting in a loss of over $860,000. The break-even point is estimated to be 1.19 years.
Total cost 50000pcs for Auto bricks plant hoffman kiln by cbecl
1. The document provides a list of equipment for a brick making production line with a capacity of 50,000 pieces per day, including feeders, crushers, mixers, extruders, conveyors, and other machinery.
2. It then lists additional equipment for the block forming and drying processes, including cutters, dry cars, pushers, exhaust fans, tractors, and trailers.
3. Finally, it provides a materials list for the kiln, including fire mouths, valves, gates, and refractory materials, and calculates the total cost of the production line, machinery, labor, and materials.
F-Grind V Surface Grinding Machine
The grinding spindle runs in heavy-duty, preloaded angular contact ball bearings
Automatic feed in X/Y/Z
High positioning accuracy of the vertical axis by AC servo motor in conjunction with recirculating ball screw
Programmable feed of the vertical axis (AD5)
Rapid traverse to the desired working height
Rough and finish parameters are adjustable
Hydraulic table movement in the longitudinal axis
Double V guides for the cross travel
Table guideways are hardened, ground and PTFE (polytetrafluoroethylene) coated for very high wear resistance
Combination of flat and V-guides for the table longitudinal feed
High table load capacity for heavy workpieces
Commonwealth Games Village Complex
This document provides pricing information for apartments in the Commonwealth Games Village Complex in Delhi. It lists the net basic sale price for 2 BHK, 3 BHK, 4 BHK and 5 BHK units, along with additional charges for parking and other fees. A construction linked payment plan is then outlined, with percentages due at various stages from booking to possession. Location-based premium prices are also listed.
Equal percentage calculation
This document discusses the relationship between valve opening percentage and flow for an equal percentage valve. It provides the formula Q = Q0 * e^bY, where Q is the flow, Q0 is the initial flow, Y is the valve opening percentage, and b is a constant determined by the maximum flow. The document then applies this formula using sample values and graphs the resulting flow at each 10% valve opening from 10-100%.
Milling 101: Formulas for milling operations
This document provides formulas for calculating key metrics for milling operations:
1) It gives formulas for calculating cutting speed (Vc), spindle speed (n), and feed per tooth (fz) based on cutting diameter, spindle speed, and other parameters.
2) It also provides formulas for calculating metal removal rate (Q), table feed speed (Vf), torque (Mc), net power requirement (Pc), and defines other terms used in milling.
3) Additional details and definitions for terms used in the formulas are available by clicking on the provided link.
Catalog v12.1
Innovative Engineers is a manufacturer and supplier of high quality material handling equipment that was founded in 1995. The company has grown to become a prominent provider in the industry. Innovative Engineers is committed to quality and has qualified engineers to provide technological expertise and ISO 9001-2008 compliant processes. The company's vision is to make material handling easier through innovative ideas. The document then provides specifications for several of Innovative Engineers' product lines, including pallet trucks, stackers, scissor lifts, and dock levelers.
30,000lb-40,000lb Capacity Rigger Lift Forklift For Sale call 616 200-4308
30,000lb. to 40,000lb. Capacity Rigger Lift Forklift
Year: 2008
Capacity: 30,000lbs. to 40,000lbs. @ 24″ Load Center
Model: RC30/40
Serial: 0408-RC3040-04
Hours: 2,433
Equipped With:
Boom
Fresadora Ouplan Steel
The document describes several CNC router models from Ouplan with varying working dimensions from 1100x1100mm to 4100x2100mm. The routers are built from iron and aluminum for rigidity and can be equipped with optional accessories like an automatic tool changer, tangential knife, and crop mark reader. They are suitable for cutting and engraving a variety of materials like wood, acrylic, aluminum, and softer materials using optional cutting knives. The routers have 3 interpolated axes as standard but can be extended to 4 axes.
Arreyadi - Ratecard 2013
This document contains the rate card and technical specifications for advertising in the Arreyadi newspaper in Saudi Arabia for 2013. It lists the prices for various ad sizes and placements in both full color and black and white. It provides the rates for full pages, half pages, quarter pages, and special placements like front page, inside covers, and double page spreads. It also includes specifications for file formats, resolutions, and technical requirements. The final section outlines terms, conditions, pricing and contact information for special operations and loose inserts.
Star engineering solution
The document provides cost details for various departments of Star Engineering Company including labor, materials, rent, depreciation, taxes, power, salaries and other expenses. It then allocates these costs to different production departments and calculates the overhead rate per hour.
What's hot (14)
LIK SANG Presentation (waste paper baler) worldwide
LIK SANG Presentation (waste paper baler) worldwide
Total cost 50000pcs for Auto bricks plant hoffman kiln by cbecl
Total cost 50000pcs for Auto bricks plant hoffman kiln by cbecl
30,000lb-40,000lb Capacity Rigger Lift Forklift For Sale call 616 200-4308
30,000lb-40,000lb Capacity Rigger Lift Forklift For Sale call 616 200-4308
Viewers also liked
500 600kg feed pellet line
This document provides contact information for a feed pellet production line supplier and details of a 500-600KG/H line. It lists the equipment included, such as material receiving, conveying, mixing, pelletizing, cooling, and storage systems. The total price is $26,800 FOB from Tianjin port, China. Terms include a 30% down payment, 70% prior to delivery, with technicians provided for installation and training.
Pin mill
The Pin Mill is an impact pulverizer that can finely grind materials ranging from a millimeter to 30 micrometers in size. It has a convertible pulverization knife and different styles of rotors and sieves that allow it to pulverize low to medium hardness materials. The Pin Mill is suitable for use in many industries like food, chemicals, medicine, plastics and can adjust the fineness of the material based on blade design, rotation speed, and power. Material is fed into the milling chamber and impacted by a high-speed rotating beater between the screen and beater to be pulverized into powder, which is then separated by the screen.
Wet pan mill
The Wet Pan Mill is a type of grinding machine that is praised for its low costs, high production capacity, efficiency and ease of use. It can be used instead of a ball mill for medium and small scale operations. The Wet Pan Mill grinds materials through the rotation of its pan and uses water during the grinding process. Regular maintenance such as adding lubricant, checking bolts and replacing damaged bearings is required to keep the Wet Pan Mill functioning properly. It comes in several models with different specifications depending on the input size and power required.
500kg per hour,4ton per day, wood pellet machine
This commercial offer summarizes the configuration and pricing for a 500KG wood pellet production line. The line includes equipment for wood chipping, drying, grinding, pelletizing, screening, packing, and control systems. The total EXW price is $38,616. Payment terms include a 30% deposit, with the balance due before shipping, and a one-year warranty on equipment. Contact information is provided to inquire further about the products.
Jigging machine quotation
This document is a commercial offer for a jigging machine to process fluorite. It presents details on several jigging machine models including specifications like stroke, stroke times, feeding size, handling capacity, and power requirements. The model LTA1010/2 is recommended for the customer's needs and is offered at a price of $5900 CIF to Bandar Abbas, Iran. Additional information provided includes usage, advantages, and technical parameters of the machines.
150 tpd finnished copper beneficiation plant
The document is a commercial offer for a 150TPD copper beneficiation plant from a Chinese company. It includes equipment specifications and pricing, technical services, after-sales support, and an introduction to the company. The total cost of the plant is $469,844.27. The company offers installation support, training, maintenance, and has experience exporting similar plants to over 80 countries.
Coal crushing and drying solution
This document is a commercial offer from Evita Lee to Mr. Waleed for equipment including a rotary dryer, belt conveyors, roller crusher, bucket elevator, and spare parts for a total price of $166,858 USD. The equipment will be delivered within 20-25 days of receiving prepayment. The seller guarantees the quality of the machines for one year and will provide installation and debugging by technical engineers at the buyer's site at a cost of $60 USD per engineer per day paid by the buyer.
150 200 tons per hour granite crushing production line
The document provides a quotation for a 150-200 T/H granite crushing production line. It includes a list of 7 pieces of equipment such as a vibrating feeder, jaw crusher, and sand making machine. Specifications are provided for each machine, describing features like capacity, motor power, and dimensions. A flowchart shows the process of crushing granite from a 600-1000mm input size down to sizes below 25mm. Payment and technical support terms are also outlined, such as a 30% deposit, 1 year warranty, and lifetime equipment maintenance.
10ton gold processing plant
This document provides a commercial offer for a 10 ton per hour gold processing plant. It includes 12 items with descriptions, specifications, photos, quantities, unit prices and total prices in US dollars. The total amount for the main plant is $94,395. It also includes options for additional auxiliary equipment for recovering fine gold, including spiral chutes, shaking tables, and other equipment totaling $10,820. Contact information is provided at the end for any other questions.
2 3ton per hour sand gold processing
This document is a commercial offer for sand gold processing equipment. It lists various pieces of equipment such as bins, conveyor belts, screens, and mills. Prices and specifications are provided for each item. The total price for all equipment is $38,340 FOB from Qingdao, China. The document also outlines terms and conditions of the sale including requirements for payment, packaging, delivery time, warranties, and installation support if needed. Contact information is provided at the end for any additional questions.
Leaching tank
The document describes a leaching tank used for gold extraction. It has an effective volume range of 6-395 cubic meters. It uses dual impellers for uniform mixing and low energy consumption. The impellers are coated in rubber for long service life. Air is agitated and dispersed throughout the tank via rotation of the impellers. The tank uses moderate stirring intensity to distribute pulp concentration and fineness consistently, improving absorption and import rates. Technical parameters are provided for different tank models varying in size and specifications.
1000 kgsph platinum and gold processingprocessing plant
1000 kgsph platinum and gold processingprocessing plant
200 tpd steel scraps flotation plant
The document is a commercial offer for an aluminum scraps flotation plant. It includes a list of 11 pieces of equipment, such as vibrating feeders, jaw crushers, belt conveyors, ball mills, and flotation machines. The total price is $112,670. It describes payment and delivery terms, a one-year warranty, and assistance with export procedures. Contact information and an introduction to the selling company are also provided.
500 kg per hour wood pellet production line
This commercial offer summarizes the configuration and pricing for a 500KG wood pellet production line. It includes a wood chipper, hammer mill, and packaging. The total price is $6,793 USD. A 30% deposit is required upon signing, with the remaining 70% due before shipping. A 1-year warranty is included, covering replacement of defective parts. Contact information is provided for Evita Lee to discuss any questions.
Cement mill
The document discusses cement mills and their role in cement production. It describes how cement can be hardened in both air and water, requiring cement mills for grinding and cement crushers for crushing. It then provides details on China's cement mills, from traditional ball mills to new trapezium grinding mills, noting they play an important role in cement production lines and providing lower prices than foreign mills. Technical parameters of cement mill models are also listed.
Viewers also liked (18)
150 200 tons per hour granite crushing production line
150 200 tons per hour granite crushing production line
1000 kgsph platinum and gold processingprocessing plant
1000 kgsph platinum and gold processingprocessing plant
Similar to Diesel jaw crusher
Skoda Kodiaq - Petrol
This document provides technical specifications for several petrol engine options for the ŠKODA KODIAQ SUV. It details information on the engine types, performance statistics, transmission options, chassis details, dimensions, payload capacities, fuel efficiency and emissions for each engine. The engines range from a 1.4 L TSI with 92 kW to a 2.0 L TSI producing 132 kW. All specifications are shown in a table for easy comparison of the different variants.
Skoda Kodiaq - Diesel
This document provides technical specifications for four ŠKODA KODIAQ diesel engine models - a 2.0 TDI/110 kW front-wheel drive, a 2.0 TDI/110 kW 4x4, a 2.0 TDI/110 kW 4x4 automatic, and a 2.0 TDI/140 kW 4x4 automatic. It includes details on the engine, transmission, chassis, body, performance, consumption, weights and dimensions for each model. The specifications cover areas like engine type, displacement, power output, fuel injection system, transmission type, drive type, payload capacity, fuel tank size, turning radius and more.
Diesel engine-crusher
Diesel engine crusher hot sale for small scale stone crushing plant and where do no t have enough electricity. Great Wall diesel crushers mainly refer to diesel engine jaw crusher and diesel engine hammer crusher.
More information on diesel crusher price, please feel free to contact me !
Email salescrushers@gmail.com
Diesel engine-crusher FOR SALE IN CRUSHING PLANT
Diesel engine crusher is mainly used in some place that don't have enough electricity or without electricity.With small size,small diesel engine crusher also belongs to small crusher or mini crusher. Small diesel jaw crushers can do the middle or fine crushing for every kind of rocks and stones. This kind of mini diesel jaw crusher is in compact structure, easy usage and simple operation. We also can do portable (mobile) ones as clients' request.
Small Portable Diesel engine crusher For Sale in limestone crushing plant
High cost-effective diesel engine crusher for sale in limestone crushing plant, welcome to consult us with diesel crushers prices and diesel crusher specifications!
Email salescrushers@gmail.com
website www.dieselcrusher.com
model survey of mercedes benz
The document provides an overview and specifications of various Mercedes-Benz models, including the C-Class, E-Class, M-Class, and S-Class. For each class, it lists the different generations by year and provides technical details such as engine specifications, safety features, and additional features for selected trim levels within each generation.
Caterpillar cat dp45 k forklift lift trucks service repair manual snet19c 800...
This document provides a service manual for truck models GP40K, GP40KL, GP45K, GP50K, DP40K, DP40KL, DP45K and DP50K. It includes 3 sections - general information, specifications and technical data for major components like the engine, transmission, brakes and other systems. Dimensions, images and exploded diagrams are also provided to support servicing and maintenance of the trucks.
Mineral Production Machinery
Zhengzhou Kehai Heavy Industrial Machinery Co., Ltd
Tel: +86-371-64135926 Mail:gary102884@hotmail.com
Fax: +86-371-64392429
Mobile: +86 15237140218
Skype:lhs102884; ICQ:566896923;Yahoo:lhs102884
Add: No.7, Chaoyang Road,Zhengzhou City,Henan Province, China
Mineral Production Machinery
Zhengzhou Kehai Heavy Industrial Machinery Co., Ltd
Tel: +86-371-64135926 Mail:gary102884@hotmail.com
Fax: +86-371-64392429
Mobile: +86 15237140218
Skype:lhs102884; ICQ:566896923;Yahoo:lhs102884
Add: No.7, Chaoyang Road,Zhengzhou City,Henan Province, China
Electric Forklift Catalogue
This document provides specifications for electric forklifts ranging from 1.5 to 3.5 ton capacity. It includes details on dimensions, performance, weights, chassis, wheels, brakes, drive lines, batteries, masts, controllers and standard vs optional features. Specification details are provided for various forklift models that vary by lift capacity, lift height, mast height and other parameters.
Mineral production machinery
Mobile: +86 15237140218 Mail:gary102884@hotmail.com lhs102884@sohu.com
Website: http://www.brickmachine-kehai.com Skype:lhs102884;
Add:No.7, Chaoyang Road,Zhengzhou City(Gongyi Area),Henan Province, China
Cat 950 h and 2200
The document provides specifications for an Isuzu ELF NKR71 125PS lube truck, including its dimensions, engine details, transmission gears, braking and suspension systems, tires, weight, fuel and battery capacities, performance characteristics, and optional features. It has an overall length of 5830mm, 4HG1-T engine with 4570cc displacement and 125PS power, 5-speed manual transmission, hydraulic brakes with vacuum booster, semi-elliptic leaf spring suspension, and can carry a maximum gross vehicle mass of 8250kg. It also has options like a tilt cabin, rearview camera, and radio/CD/MP3 system.
Scheda tecnica Seat Leon
The document provides technical specifications for various models of the new SEAT Leon 5D. It includes details on the engine, performance, emissions, fuel consumption, transmission, chassis, and weights for each model. The models range from petrol and diesel engine options with power ratings between 86-184hp and torque from 160-380Nm. Transmission options include manual and DSG automatic gearboxes. The document also lists dimensions, fuel tank capacity, and maximum towing weights for each variant.
Volvo V90 Technical Specs - Official
This document provides specifications for the Volvo V90, including:
- Details on the powertrain options which include 4-cylinder gasoline and diesel engines as well as a plug-in hybrid.
- Performance statistics such as fuel economy, acceleration, top speed and battery range for hybrid models.
- Exterior and interior dimension measurements.
- Chassis details including suspension, steering, brakes and weight.
2015 SMEC Machinery Products Catalogues
This document provides information about SMEC Co., Ltd., a Korean manufacturer of machine tools, semiconductor equipment, and robots.
It summarizes the company's history since 1988 when it started as a machine tool division of Samsung Heavy Industries. It then lists the company's certifications and details of exporting manufacturing technology to various global regions.
The document includes specifications for several of SMEC's CNC turning center models, along with images and descriptions of their features and capabilities. It promotes SMEC's focus on reliable partnerships and supplying parts/equipment to major companies in industries like automotive, aerospace, and semiconductors.
Mitsubishi fg30 k mc forklift trucks service repair manual sn ef13d 35001-up
This document provides general information about Mitsubishi forklift truck models including the FG15K, FD15K, FG18K, FD18K, and other models. It includes tables that list the models, serial number locations, dimensions, and technical specifications. The tables provide data on items like lift capacity, lift height, travel speed, gradeability, wheelbase, tire size and pressure, service weight, and front/rear axle weight distribution.
Similar to Diesel jaw crusher (16)
Small Portable Diesel engine crusher For Sale in limestone crushing plant
Small Portable Diesel engine crusher For Sale in limestone crushing plant
Caterpillar cat dp45 k forklift lift trucks service repair manual snet19c 800...
Caterpillar cat dp45 k forklift lift trucks service repair manual snet19c 800...
Mitsubishi fg30 k mc forklift trucks service repair manual sn ef13d 35001-up
Mitsubishi fg30 k mc forklift trucks service repair manual sn ef13d 35001-up
More from Evita Lee
Superfine grinding mill
The document discusses superfine grinding mills, which are used to grind materials into very fine powders. It describes the various applications of superfine grinding mills in industries such as chemical, food, and non-metal mining. It also outlines the working principles of superfine grinding mills, which integrate crushing, grinding, and classifying to produce powders as fine as 2500 mesh. Key features highlighted include low energy consumption, high fineness, ability to grind a wide range of materials, and stable performance.
Spiral classifier
The document discusses spiral classifiers, which are used in mineral processing to separate ore slurries by particle size. It outlines several key variables that must be balanced for effective classification, including the angle of the inclined bed, speed of the rakes or spirals, slurry density, tonnage throughput, and ore settling rate. All of these factors, as well as the ore characteristics, will determine how well a classifier performs. The classifiers are also prone to wear issues and becoming overloaded. Proper adjustment and monitoring of the variables is needed to achieve good mineral separation and avoid operational problems.
Spiral chute
The document summarizes the benefits and working principles of spiral chutes used for mineral beneficiation. Specifically:
1) Spiral chutes developed by the company have notch grooves that improve mineral enrichment and recovery rates by 10% over common spiral chutes.
2) Spiral chutes separate minerals from sand using gravity and centrifugal force as materials spiral downward, with concentrates discharged and tailings removed.
3) Spiral chutes have a simple structure with no moving parts, making them easy to manufacture, install and maintain.
Raymond mill machine
The document summarizes information about the Raymond mill machine, which is suitable for grinding non-flammable materials with hardness below 9.3 Mohs. It consists of main parts like the frame, blow shell, and grinding roller. Materials are ground between the rollers and grinding ring due to centrifugal force. Processed materials include quartz, feldspar, and barite. It is widely used in industries like metallurgy, construction, and mining.
Pan mill
The document discusses wet pan mills, which are used to select and grind various minerals like gold, silver, and other metals. Wet pan mills have advantages over ball mills like lower costs, faster processing, smaller footprint, and higher returns. They are suitable for small to medium mining enterprises. The document provides details on the working principle, specifications, and capacities of different wet pan mill models for processing gold. It also includes contact information for the manufacturer.
Ore agitator
The document describes an ore agitator and provides details about its features, specifications, and applications. It lists the agitator's advantages as long service life, high quality, energy efficiency, simple structure, and ability to mix materials well. Technical specifications are provided for different agitator types and sizes, including dimensions, power requirements, rotation speeds, and effective volumes. The agitator is suitable for mixing ores before processing in industries like mining and pharmaceuticals. Contact information is given for the manufacturer.
Mining project knowloadge
The document is a multi-page website for a Chinese mining project equipment manufacturer. It provides information on their various mining machines and grinding equipment, including ball mills, barite grinding mills, gypsum grinding mills, and others. It also lists recent and popular projects, as well as details on the company location in Zhengzhou, Henan Province, China. The company offers integrated technology solutions and machinery for mining and agricultural industries.
Micro powder grinder machine
The document describes a micro powder grinder machine. It has the following key points:
1. It can grind low to middle hardness materials and is suitable for industries like chemicals and food.
2. It has cooling capabilities and can handle thermoplastic materials. It also has dust recovery to protect the environment.
3. It uses a vertical shaft design to grind and classify powder simultaneously and has adjustable controls for fineness and airflow.
Magnetic separator
Magnetic separators are commonly used to separate magnetite iron ore. They directly separate magnetite sand or sea iron sand. For rocky magnetite, crushing and grinding is required first before magnetic separation. Magnetic separators consist of a drum where magnets are embedded to attract magnetic materials from non-magnetic tailings. For weaker magnetic ores like hematite and limonite, both magnetic separation and gravity separation are used, though gravity separation is more common due to lower costs and higher throughput. The document provides examples of iron ore beneficiation projects from 2011 that improved iron grades using magnetic separation and other methods.
Limestone micro powder grinder
This document discusses a limestone micro powder grinder. It begins by describing the grinding process, which involves crushing limestone into smaller pieces and then grinding it into a fine powder in a grinding chamber. It then lists the main equipment used in a limestone production line, including a main grinding unit, blower, classifiers, and other auxiliary equipment. Finally, it provides specifications for different models of limestone micro powder grinders and contact information for the company that manufactures them.
Leaching tank
The document describes a leaching agitation tank used in gold cyanidation processes. It has two rotating impellers that agitate and disperse air through the ore pulp to improve absorption rates. The tank uses a dual impeller system to move the pulp downward and diffuse it along damping plates while air is fed in to form a uniform suspended mixture for leaching. Technical parameters are provided for different tank models ranging from 2 to 8.5 meters in diameter and height, with information on volume, impeller speed, motor power and weight.
Iron ore beneficiation plant
The document describes an iron ore beneficiation plant manufacturer that has been in business since 2001. It produces iron ore beneficiation plants used to separate mineral from gangue using superior grade materials. The plants are manufactured under strict quality control and are available at affordable prices in various specifications tailored to customer needs. The manufacturer can also provide installation assistance and after-sales support.
Hgm grinding machine
The document describes the HGM grinding machine, which is used to produce micro powders for industries such as mining, construction materials, ceramics, and fertilizer. It consists of various components that feed materials into a grinding chamber with rollers, where the materials are repeatedly crushed and ground into fine powders. The powders are then classified and collected in a cyclone collector before being packed. The grinding machine offers benefits such as high efficiency, long-lasting parts, safety, flexibility in fineness adjustment, and an environmentally friendly design. Specifications of different HGM models are also provided.
Gypsum grinding mill
The document discusses various types of grinding equipment that can be used for grinding gypsum, including vertical gypsum mills, ball mills, Raymond mills, and roller mills. It states that these gypsum grinding mills have higher capacity and longer lifespans than other grinding equipment like jet mills or ball mills. The grinding fineness of the gypsum equipment can reach D97≤5μm. It also provides contact information for the company that manufactures the gypsum grinding mills.
Gold trommel
Winnermac manufactures mineral processing equipment including trommels, shaking tables, flotation equipment, and other machines. A gold trommel, or rotary scrubber, is used to wash alluvial gold ore and separate gold from sticky clay. It has manganese iron boards inside the drum to break up clay and a high capacity of 200 tons per hour. The trommel provides strong disintegration of clay and stable, easy to operate performance for gold mining customers.
Gold ore dressing plant
The shaking table is a classic and economical equipment used in gold ore dressing plants. It separates gold from impurities using gravity separation where the denser gold particles move differently than lighter impurities when water flows across an inclined shaking table. Key factors that influence the separation include the table slope, feeding speed, material density, and the number and length of shakes, which affect the water flow velocity and particle movement.
Gold concentrator
The document describes a gold concentrator, which is a type of gravity concentration apparatus that uses centrifugal force to separate gold particles from other materials. It works by feeding a slurry into a bowl that rotates at high speed, thrusting heavier gold particles outward where they become trapped in grooves, while lighter material flows upward. Application shows recovery rates as high as 99% for gold down to a size of 0.04mm. It is an efficient alternative to amalgamation for recovering free gold across all particle sizes from placer deposits and hard rock mines.
Coffee bean grinder
This document describes an industrial coffee bean grinder. It works by using relative motion between fixed and movable discs to grind materials through actions like impact, friction, and impact between materials. It has a simple and solid structure with stable operation and high grinding efficiency. Different sized powders can be produced by changing the screen mesh. The grinder is suitable for applications in pharmaceutical, chemical, and food industries. It lists technical parameters and specifications for different models of the coffee bean grinder.
Ball mill
Ball mill is a grinding device that is widely used in mineral processing and other industries. It grinds material by rotating a cylinder with steel grinding balls, causing the balls to fall back and impact the material to be ground. The rotation speed and ball size can be adjusted depending on the application. Ball mills are commonly used for grinding materials such as cement, lime, and ceramic raw materials. They are key equipment for grinding materials after crushing.
Autoclave
The autoclave is a key piece of equipment in AAC block production lines. It cures cut bodies and autoclaved bricks under high temperature and pressure. Autoclaves are made of steel in a horizontal barrel shape from 16MnR steel. They are classified as pressure vessels and require safety certification to operate. Autoclaves are used to cure silicate bricks and other cement products through high-temperature steaming.
More from Evita Lee (20)
Recently uploaded
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recently uploaded (20)
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Diesel jaw crusher
- 1. Diesel Jaw Crusher my skype:evitalee55 whatsapp:0086 18637192252 my email: evita@hiimac.com welcome to my website! www.hiimac.com Model Feed Size (mm) Discharging Size (mm) Capacity (t/h) Power for Diesel engine (KW) Weight (kg) Overrall Dimension (mm) PED150×250 <125 10-40 1-3 5.7 920 1836×1030×1408 PED250×400 <200 20-50 5-20 15.5 3150 2805×1210×1860 Features PED150×250 Model Specification PED150X250 Photo Feed Size (mm) <125 Discharging Size (mm) 10-40 Capacity (t/h) 1-3 Power for Diesel engine (KW) 5.7 Weight (kg) 920 Overall Dimension (mm) 1836×1030×1408 EXW Price PED250×400 Model Specification PED250X400 Photo Feed Size (mm) <200 Discharging Size (mm) 20-50 Capacity (t/h) 5-20 Power for Diesel engine (KW) 15.5 Weight (kg) 3150 Overall Dimension (mm) 2805×1210×1860 EXW Price
- 2. Model Specification PED150X250 PED250X400 Feed Size (mm) <125 <200 Discharging Size (mm) 10-40 20-50 Capacity (t/h) 1-3 5-20 Power for Diesel engine (KW) 5.7 15.5 Weight (kg) 920 3150 Overall Dimension (mm) 1836×1030×1408 2805×1210×1860 EXW Price $2416 $6882