2. 2. IT IS OK TO WEAR LOOSE CLOTHING, DANGLING OBJECTS AND
JEWELLERY USING HAND TOOL.
A. TRUE
B. FALSE
3. 3. KEEP CORDS AND HOSES AWAY FROM HEAT, OIL AND SHARP
EDGES.
A. TRUE
B. FALSE
4. 4. USE ONLY TOOLS AND EQUIPMENT IN GOOD CONDITION.
A. TRUE
B. FALSE
5. 5. IT IS OK TO MAKE ADJUSTMENTS OR CLEAR A JAM WHILE THE
POWER TOOL IS RUNNING.
A. TRUE
B. FALSE
6. 6. IF ANY TOOL BREAKS OR MALFUNCTIONS, REPORT IT TO YOUR
SUPERVISOR IMMEDIATELY.
A. TRUE
B. FALSE
7. 7. BEFORE CONNECTING TO A POWER SOURCE, MAKE SURE THE
POWER IS ON.
A. TRUE
B. FALSE
8. 8. SAFETY GLASSES SHALL ALWAYS BE WORN WHENEVER YOU ARE
USING POWER HAND TOOL.
A. TRUE
B. FALSE
9. 9. THERE ARE SEVERAL TYPES OF POWER TOOLS, INCLUDING
ELECTRIC, PNEUMATIC, HYDRAULIC.
A. TRUE
B. FALSE
10. 10. NEVER USE ELECTRIC TOOLS IN WET CONDITIONS.
A. TRUE
B. FALSE
11. 11. WHEN NOT IN USE, POWER TOOLS SHOULD BE DISCONNECTED.
A. TRUE
B. FALSE
12. 12. KEEP SAFE DISTANCE BETWEEN YOUR HANDS AND ALL MOVING
PARTS OF THE POWER TOOL.
A. TRUE
B. FALSE
13. 13. DON’T LEAVE A POWER TOOL UNATTENDED WHILE IT IS RUNNING.
A. TRUE
B. FALSE
14. 14. IT IS OK TO STARTLE SOMEONE WHO IS USING A POWER TOOL.
A. TRUE
B. FALSE
15. 15. USE SAFETY GUARDS EXACTLY AS THEY ARE SUPPOSED TO BE
USED.
A. TRUE
B. FALSE
16. 16. WHEN TIGHTENING A NUT WITH AN ADJUSTABLE WRENCH,
ALWAYS PULL THE WRENCH TOWARD YOU; NEVER PUSH THE WRENCH
AWAY FROM YOU.
A. TRUE
B. FALSE
17. 17. PLASTIC COVERED HANDLES ON WIRE-CUTTING PLIERS MAY BE
USED TO CUT LOW-VOLTAGE LIVE ELECTRICAL WIRE.
A. TRUE
B. FALSE
18. 18. SCREWDRIVERS MAY BE USED FOR PURPOSES OTHER THAN
DRIVING OR REMOVING SCREWS, FOR EXAMPLE AS A CHISEL.
A. TURE
B. FALSE
19. 19. WHEN SELECTING A STANDARD SCREWDRIVER BE CERTAIN THAT
THE TIP IS ALMOST AS THICK AND AS WIDE AS THE SLOT OF THE HEAD
OF A SCREW.
A. TRUE
B. FALSE
20. 20. WHEN USING A HACKSAW, SAFETY GLASSES MUST BE WORN.
A. TRUE
B. FALSE
21. 21. WHEN YOU ARE FINISHED USING A HACKSAW, TENSION SHOULD
BE EASED.
A. TRUE
B. FALSE
