This document contains the name, subject, student ID, and date for a student followed by 21 true/false questions about safe tool use. The questions cover proper examination and condition of tools, appropriate clothing and jewelry, keeping cords away from heat and edges, using tools in good condition, not adjusting tools while running, reporting broken tools, checking power is off before connecting, wearing safety glasses with power tools, types of power tools, not using tools in wet conditions, disconnecting tools when not in use, keeping safe distance from moving parts, not leaving tools unattended, not startling others using tools, using safety guards properly, pulling wrenches toward you, not using insulated handles to cut live wires, using screwdri

1. Nombre: Carlos Santiago
Rodríguez Pérez
Materia: Ingles
Ficha: 900887
Fecha: 12/09/15

2. 1. Always examine the tool for
damages before use.
a)True

3. 2. It is OK to wear loose clothing,
dangling objects and jewellery
using hand tool.
b)False

4. 3. Keep cords and hoses away
from heat, oil and sharp edges.
a)True

5. 4. Use only tools and equipment
in good condition.
a)True

6. 5. It is OK to make adjustments or
clear a jam while the power tool
is running.
b)False

7. 6. If any tool breaks or
malfunctions, report it to your
supervisor immediately.
a)True

8. 7. Before connecting to a power
source, make sure the power is
on.
b)False

9. 8. Safety glasses shall always be
worn whenever you are using
power hand tool.
a)True

10. 9. There are several types of
power tools, including electric,
pneumatic, hydraulic.
a)True

11. 10.Never use electric tools in
wet conditions.
a)True

12. 11.When not in use, power tools
should be disconnected.
a)True

13. 12.Keep safe distance between
your hands and all moving parts
of the power tool.
a)True

14. 13.Don’t leave a power tool
unattended while it is running.
a)True

15. 14.It is OK to startle someone who is
using a power tool.
b)False

16. 15.Use safety guards exactly as
they are supposed to be used.
a)True

17. 16.When tightening a nut with an
adjustable wrench, always pull
the wrench toward you; never
push the wrench away from
you.
a)True

18. 17.Plastic covered handles on
wire-cutting pliers may be
used to cut low-voltage live
electrical wire.
a)True

19. 18.Screwdrivers may be used for
purposes other than driving or
removing screws, for example
as a chisel.
a)True

20. 19.When selecting a standard
screwdriver be certain that the
tip is almost as thick and as wide
as the slot of the head of a
screw.
a)True

21. 20.When using a hacksaw,
safety glasses must be worn.
a)True

22. 21.When you are finished using a
hacksaw, tension should be
eased.
a)True