EMC 5719/5712 - Materiais e Microestruturas (/Fundamentos de Engenharia de Materiais 2), prof. Paulo Wendhausen.
Curso de Engenharia de Materiais
Departamento de Engenharia Mecânica
Universidade Federal de Santa Catarina
O documento discute eletroquímica, especificamente o funcionamento de pilhas elétricas. Ele explica que pilhas produzem corrente elétrica através de reações espontâneas de oxidação-redução que separam oxidantes e redutores. Também descreve a primeira pilha construída por Volta em 1800 usando discos de zinco e cobre separados por solução ácida, e a pilha aprimorada de Daniell em 1836 usando soluções salinas em vez de ácidas.
O documento discute conceitos fundamentais sobre soluções, incluindo:
1) Definições de termos como soluto, solvente, solubilidade e saturação.
2) Diferentes tipos de soluções e concentrações como massa, volume, molaridade e porcentagem.
3) Processos como diluição, hidratação, dissolução e fatores que afetam a solubilidade.
1. O documento apresenta 33 exercícios sobre processos de soldagem. Os exercícios abordam tópicos como definições de termos técnicos, cálculos relacionados a soldagem e discussões sobre diferentes processos e variáveis envolvidas na soldagem.
Este documento apresenta os principais pontos sobre o planejamento da disposição de equipamentos e tubulações em instalações industriais. Aborda tópicos como o estudo do layout, disposição das construções, arranjo e detalhamento de tubulações, drenagem e facilidades para manutenção.
The document discusses phase diagrams and their importance in understanding the microstructure and properties of materials. It defines key terms like phase, solubility limit, and eutectic reaction. Examples of binary phase diagrams for systems like iron-carbon and lead-tin are presented and used to explain how microstructures form in eutectic, hypoeutectic, and hypereutectic alloys during cooling. Methods for calculating the relative amounts of phases present in alloys of different compositions are also described.
O documento descreve uma prova de seleção para o programa de pós-graduação em Química da UFPB, contendo 8 questões sobre tópicos de Química como ligação de hidrogênio, teoria dos orbitais moleculares, cálculos estequiométricos e termodinâmica.
O documento apresenta um resumo sobre fundamentos da eletroquímica e corrosão. Aborda conceitos como histórico da eletroquímica, definições de Faraday, tipos de condutores e células eletroquímicas. Também discute formas de corrosão, taxas de corrosão, classificação de processos corrosivos e fatores que influenciam a corrosão.
O documento discute os processos de soldagem com eletrodo revestido e TIG. Ele define soldagem com eletrodo revestido e explica as funções do revestimento do eletrodo. Também compara os processos de soldagem TIG e com eletrodo revestido, destacando que este último utiliza eletrodo consumível enquanto o TIG não, e que cada um tem limitações e vantagens diferentes.
O documento discute eletroquímica, especificamente o funcionamento de pilhas elétricas. Ele explica que pilhas produzem corrente elétrica através de reações espontâneas de oxidação-redução que separam oxidantes e redutores. Também descreve a primeira pilha construída por Volta em 1800 usando discos de zinco e cobre separados por solução ácida, e a pilha aprimorada de Daniell em 1836 usando soluções salinas em vez de ácidas.
O documento discute conceitos fundamentais sobre soluções, incluindo:
1) Definições de termos como soluto, solvente, solubilidade e saturação.
2) Diferentes tipos de soluções e concentrações como massa, volume, molaridade e porcentagem.
3) Processos como diluição, hidratação, dissolução e fatores que afetam a solubilidade.
1. O documento apresenta 33 exercícios sobre processos de soldagem. Os exercícios abordam tópicos como definições de termos técnicos, cálculos relacionados a soldagem e discussões sobre diferentes processos e variáveis envolvidas na soldagem.
Este documento apresenta os principais pontos sobre o planejamento da disposição de equipamentos e tubulações em instalações industriais. Aborda tópicos como o estudo do layout, disposição das construções, arranjo e detalhamento de tubulações, drenagem e facilidades para manutenção.
The document discusses phase diagrams and their importance in understanding the microstructure and properties of materials. It defines key terms like phase, solubility limit, and eutectic reaction. Examples of binary phase diagrams for systems like iron-carbon and lead-tin are presented and used to explain how microstructures form in eutectic, hypoeutectic, and hypereutectic alloys during cooling. Methods for calculating the relative amounts of phases present in alloys of different compositions are also described.
O documento descreve uma prova de seleção para o programa de pós-graduação em Química da UFPB, contendo 8 questões sobre tópicos de Química como ligação de hidrogênio, teoria dos orbitais moleculares, cálculos estequiométricos e termodinâmica.
O documento apresenta um resumo sobre fundamentos da eletroquímica e corrosão. Aborda conceitos como histórico da eletroquímica, definições de Faraday, tipos de condutores e células eletroquímicas. Também discute formas de corrosão, taxas de corrosão, classificação de processos corrosivos e fatores que influenciam a corrosão.
O documento discute os processos de soldagem com eletrodo revestido e TIG. Ele define soldagem com eletrodo revestido e explica as funções do revestimento do eletrodo. Também compara os processos de soldagem TIG e com eletrodo revestido, destacando que este último utiliza eletrodo consumível enquanto o TIG não, e que cada um tem limitações e vantagens diferentes.
O documento discute as reações de substituição eletrofílica aromática em derivados de benzeno. Explica o mecanismo geral destas reações, onde um eletrófilo ataca o anel aromático substituindo um átomo de hidrogênio. Detalha vários tipos de reações como halogenação, nitração, sulfonação, alquilação e acilação de Friedel-Crafts. Também discute como substituintes no anel podem ativar ou desativar a reatividade do benzeno nestas reações.
O documento discute diagramas de fase e mecanismos de endurecimento em materiais. Apresenta os tipos de diagramas de fase, incluindo diagramas unitários, binários e eutéticos. Explica como determinar a composição e fração de fases em diferentes temperaturas usando diagramas de fase. Também descreve processos de endurecimento como redução de grão e formação de soluções sólidas e precipitação.
O documento discute as características do arco elétrico utilizado na soldagem por fusão de metais. O arco elétrico gera calor através de uma descarga elétrica sustentada por um plasma ionizado entre os eletrodos. Isso produz energia térmica suficiente para fundir os metais. O arco também é afetado por campos magnéticos que criam um jato de plasma e podem causar instabilidades.
Este documento fornece um resumo sobre a nomenclatura de hidrocarbonetos saturados (alcanos e cicloalcanos) segundo as regras da IUPAC. Ele explica como nomear alcanos lineares e ramificados, identificar substituintes, e como construir nomes sistemáticos de compostos cíclicos e bicíclicos. O documento também discute regras para numerar cadeias principais e localizar grupos substituintes.
1. O documento discute definições, grandezas e cálculos envolvidos em bombas e instalações de bombeamento.
2. São apresentados os tipos de máquinas hidráulicas, como turbinas e bombas, além de conceitos como alturas manométricas e curvas de bombas.
3. O texto também aborda cavitação, associação de bombas e seleção a partir de catálogos.
Este documento fornece instruções para a realização de um pré-relatório sobre a síntese da aspirina. Ele inclui: 1) o pré-relatório deve ser manuscrito e individual, 2) a introdução deve conter no máximo 2 páginas e ser diferente da apostila, 3) os objetivos e procedimentos devem ser copiados da apostila, 4) a bibliografia deve ser a origem da introdução.
Este documento discute vários tipos de óxidos, incluindo suas definições, nomenclaturas e aplicações. Ele explica que óxidos são compostos binários de oxigênio e que podem ser classificados como básicos, ácidos, anfóteros, neutros ou duplos dependendo de suas propriedades químicas. Além disso, apresenta exemplos importantes como o dióxido de carbono, óxido de cálcio e peróxido de hidrogênio, descrevendo suas reações e usos.
O documento discute os processos de corrosão eletroquímica e corrosão microbiana, descrevendo os principais microrganismos envolvidos e mecanismos de corrosão. Também apresenta métodos de proteção como a aplicação de revestimentos, modificação do ambiente e uso de inibidores de corrosão.
Resolucao dos exercicios_sobre_pilhas_-_3bimestre_-_2seriesEldmara Santos
O documento apresenta 14 questões sobre pilhas eletroquímicas, com respostas detalhadas. As questões abordam tópicos como semirreações, potenciais de redução, cálculo de diferença de potencial, identificação de cátodos, ânodos e polos, e fluxo de elétrons em pilhas.
O documento descreve diferentes tipos de óxidos, incluindo sua definição, nomenclatura, classificação em óxidos ácidos, básicos, neutros e duplos/mistos. Detalha alguns óxidos importantes como o óxido de cálcio, ferro, alumínio, enxofre, zinco, nitrogênio e mercúrio, descrevendo suas propriedades e aplicações.
Este documento apresenta um resumo sobre tubos, materiais e processos de fabricação de tubulações. Ele descreve os principais tipos de tubos e materiais, como aço carbono e aço inoxidável, além de processos como laminação, extrusão e soldagem para fabricação de tubos com ou sem costura. O documento também fornece detalhes sobre normas e especificações técnicas para seleção adequada de materiais para tubulações.
O documento discute reações de oxidação-redução, definindo oxidação como ganho de elétrons e redução como perda de elétrons. Explica que reações redox envolvem duas semi-reações simultâneas e define agentes oxidantes e redutores. Apresenta exemplos de balanço de reações redox.
O documento fornece informações sobre compressores de ar comprimido, incluindo:
1) Apresenta a história do uso do ar comprimido e suas vantagens e desvantagens;
2) Discutem fundamentos sobre pressão atmosférica e leis dos gases;
3) Classifica e descreve os tipos de compressores, suas características e critérios de escolha.
O documento descreve o processo de fabricação de dutos terrestres, incluindo: (1) abertura da vala e traçado da diretriz, (2) transporte e distribuição dos tubos, (3) curvamento dos tubos, (4) concretagem de tubos e curvas, (5) montagem e soldagem das juntas, (6) inspeção das soldas, e (7) abaixamento da coluna na vala. O documento fornece detalhes técnicos sobre cada etapa do processo de instalação de dutos terrestres.
O documento descreve os principais tipos de compressores centrífugos, incluindo suas características e componentes. É descrito o caminho do gás através dos compressores, começando pela entrada no impelidor, onde recebe energia cinética e aumenta de pressão, passando pelo difusor onde reduz velocidade e aumenta pressão ainda mais, até chegar à câmara de descarga. Também são explicados conceitos termodinâmicos como difusão, associação de estágios e curva característica da máquina.
O documento discute os conceitos de simetria molecular, operações e elementos de simetria em moléculas, grupos pontuais e aplicações da simetria para determinar a polaridade e quiralidade de moléculas. Explica que a simetria molecular pode ser usada para entender propriedades físicas, orientar reações químicas e discutir estrutura eletrônica de moléculas.
O documento discute álcoois, incluindo suas estruturas químicas, exemplos como etanol e metanol, classificação, nomenclatura e aplicações como combustível.
Diagramas de equilíbrio de fases mg pbLuma Marques
O documento descreve o diagrama de fases da liga magnésio-chumbo, incluindo: 1) as fases presentes, 2) a composição dessas fases, 3) as proporções de cada fase em diferentes temperaturas.
O documento descreve três tipos de reações de eliminação em química orgânica e exemplifica reações comuns de eliminação como desidrogenação, de-halogenação e desidro-halogenação.
O documento descreve o diagrama de Pauling, um método para distribuir elétrons nos átomos e íons de acordo com sua energia crescente. Foi desenvolvido por Erwin Madelung, embora muitas vezes seja atribuído incorretamente a Linus Pauling. Explica como os elétrons saltam entre camadas ao receber energia e emitem luz ao retornar.
O documento descreve o diagrama de fases do sistema ferro-carbono, apresentando as principais fases sólidas e transformações que ocorrem com a variação da temperatura e composição de carbono, como a reação eutética a 1148°C e a reação eutetóide a 727°C.
O documento discute as reações de substituição eletrofílica aromática em derivados de benzeno. Explica o mecanismo geral destas reações, onde um eletrófilo ataca o anel aromático substituindo um átomo de hidrogênio. Detalha vários tipos de reações como halogenação, nitração, sulfonação, alquilação e acilação de Friedel-Crafts. Também discute como substituintes no anel podem ativar ou desativar a reatividade do benzeno nestas reações.
O documento discute diagramas de fase e mecanismos de endurecimento em materiais. Apresenta os tipos de diagramas de fase, incluindo diagramas unitários, binários e eutéticos. Explica como determinar a composição e fração de fases em diferentes temperaturas usando diagramas de fase. Também descreve processos de endurecimento como redução de grão e formação de soluções sólidas e precipitação.
O documento discute as características do arco elétrico utilizado na soldagem por fusão de metais. O arco elétrico gera calor através de uma descarga elétrica sustentada por um plasma ionizado entre os eletrodos. Isso produz energia térmica suficiente para fundir os metais. O arco também é afetado por campos magnéticos que criam um jato de plasma e podem causar instabilidades.
Este documento fornece um resumo sobre a nomenclatura de hidrocarbonetos saturados (alcanos e cicloalcanos) segundo as regras da IUPAC. Ele explica como nomear alcanos lineares e ramificados, identificar substituintes, e como construir nomes sistemáticos de compostos cíclicos e bicíclicos. O documento também discute regras para numerar cadeias principais e localizar grupos substituintes.
1. O documento discute definições, grandezas e cálculos envolvidos em bombas e instalações de bombeamento.
2. São apresentados os tipos de máquinas hidráulicas, como turbinas e bombas, além de conceitos como alturas manométricas e curvas de bombas.
3. O texto também aborda cavitação, associação de bombas e seleção a partir de catálogos.
Este documento fornece instruções para a realização de um pré-relatório sobre a síntese da aspirina. Ele inclui: 1) o pré-relatório deve ser manuscrito e individual, 2) a introdução deve conter no máximo 2 páginas e ser diferente da apostila, 3) os objetivos e procedimentos devem ser copiados da apostila, 4) a bibliografia deve ser a origem da introdução.
Este documento discute vários tipos de óxidos, incluindo suas definições, nomenclaturas e aplicações. Ele explica que óxidos são compostos binários de oxigênio e que podem ser classificados como básicos, ácidos, anfóteros, neutros ou duplos dependendo de suas propriedades químicas. Além disso, apresenta exemplos importantes como o dióxido de carbono, óxido de cálcio e peróxido de hidrogênio, descrevendo suas reações e usos.
O documento discute os processos de corrosão eletroquímica e corrosão microbiana, descrevendo os principais microrganismos envolvidos e mecanismos de corrosão. Também apresenta métodos de proteção como a aplicação de revestimentos, modificação do ambiente e uso de inibidores de corrosão.
Resolucao dos exercicios_sobre_pilhas_-_3bimestre_-_2seriesEldmara Santos
O documento apresenta 14 questões sobre pilhas eletroquímicas, com respostas detalhadas. As questões abordam tópicos como semirreações, potenciais de redução, cálculo de diferença de potencial, identificação de cátodos, ânodos e polos, e fluxo de elétrons em pilhas.
O documento descreve diferentes tipos de óxidos, incluindo sua definição, nomenclatura, classificação em óxidos ácidos, básicos, neutros e duplos/mistos. Detalha alguns óxidos importantes como o óxido de cálcio, ferro, alumínio, enxofre, zinco, nitrogênio e mercúrio, descrevendo suas propriedades e aplicações.
Este documento apresenta um resumo sobre tubos, materiais e processos de fabricação de tubulações. Ele descreve os principais tipos de tubos e materiais, como aço carbono e aço inoxidável, além de processos como laminação, extrusão e soldagem para fabricação de tubos com ou sem costura. O documento também fornece detalhes sobre normas e especificações técnicas para seleção adequada de materiais para tubulações.
O documento discute reações de oxidação-redução, definindo oxidação como ganho de elétrons e redução como perda de elétrons. Explica que reações redox envolvem duas semi-reações simultâneas e define agentes oxidantes e redutores. Apresenta exemplos de balanço de reações redox.
O documento fornece informações sobre compressores de ar comprimido, incluindo:
1) Apresenta a história do uso do ar comprimido e suas vantagens e desvantagens;
2) Discutem fundamentos sobre pressão atmosférica e leis dos gases;
3) Classifica e descreve os tipos de compressores, suas características e critérios de escolha.
O documento descreve o processo de fabricação de dutos terrestres, incluindo: (1) abertura da vala e traçado da diretriz, (2) transporte e distribuição dos tubos, (3) curvamento dos tubos, (4) concretagem de tubos e curvas, (5) montagem e soldagem das juntas, (6) inspeção das soldas, e (7) abaixamento da coluna na vala. O documento fornece detalhes técnicos sobre cada etapa do processo de instalação de dutos terrestres.
O documento descreve os principais tipos de compressores centrífugos, incluindo suas características e componentes. É descrito o caminho do gás através dos compressores, começando pela entrada no impelidor, onde recebe energia cinética e aumenta de pressão, passando pelo difusor onde reduz velocidade e aumenta pressão ainda mais, até chegar à câmara de descarga. Também são explicados conceitos termodinâmicos como difusão, associação de estágios e curva característica da máquina.
O documento discute os conceitos de simetria molecular, operações e elementos de simetria em moléculas, grupos pontuais e aplicações da simetria para determinar a polaridade e quiralidade de moléculas. Explica que a simetria molecular pode ser usada para entender propriedades físicas, orientar reações químicas e discutir estrutura eletrônica de moléculas.
O documento discute álcoois, incluindo suas estruturas químicas, exemplos como etanol e metanol, classificação, nomenclatura e aplicações como combustível.
Diagramas de equilíbrio de fases mg pbLuma Marques
O documento descreve o diagrama de fases da liga magnésio-chumbo, incluindo: 1) as fases presentes, 2) a composição dessas fases, 3) as proporções de cada fase em diferentes temperaturas.
O documento descreve três tipos de reações de eliminação em química orgânica e exemplifica reações comuns de eliminação como desidrogenação, de-halogenação e desidro-halogenação.
O documento descreve o diagrama de Pauling, um método para distribuir elétrons nos átomos e íons de acordo com sua energia crescente. Foi desenvolvido por Erwin Madelung, embora muitas vezes seja atribuído incorretamente a Linus Pauling. Explica como os elétrons saltam entre camadas ao receber energia e emitem luz ao retornar.
O documento descreve o diagrama de fases do sistema ferro-carbono, apresentando as principais fases sólidas e transformações que ocorrem com a variação da temperatura e composição de carbono, como a reação eutética a 1148°C e a reação eutetóide a 727°C.
O documento apresenta um resumo sobre o diagrama de fases Ferro-Carbono (Fe-C), descrevendo suas principais fases e pontos característicos, como a eutética e o eutetóide. O diagrama Fe-Fe3C é o mais relevante para estudos de aços e ferros fundidos, apresentando as fases ferrita, austenita e cementita em equilíbrio.
en el diagrama de fases se hablara de la definicion, la regla de las fases de Gibbs, sistema binarios isomoros, la regla de palanca, curvas de enfriamientos y se planteara unos ejercicios con su respectiva solucion
Este documento apresenta um resumo sobre diagramas de fases aplicados a materiais. Discute conceitos como transformações de fase em metais e ligas, o uso de diagramas de fases para representar essas transformações e os tipos de sistemas isomórficos e anisomórficos.
Este documento discute diagramas de fases e equilíbrio em materiais. Diagramas de fases mostram as fases estáveis em diferentes composições e temperaturas e como a microestrutura dos materiais está relacionada a eles. O equilíbrio de fases depende da energia livre e das propriedades das fases permanecerem constantes com o tempo. A regra das fases descreve o número de fases presentes em equilíbrio.
Este documento presenta los resultados de la Fase 3 de la competencia NetRiders Latinoamérica y el Caribe de 2012. Se enumeran los ganadores del viaje de estudios de cada país participante. Luego, se clasifican los competidores de cada región (Brasil, CANSAC, MCO y México) según su puntaje, mostrando su nombre, país y academia. Finalmente, se incluye un enlace para más detalles sobre las reglas de la competencia.
As proteínas são responsáveis pela construção de músculos, os quais aumentam o metabolismo e ajudam a queimar gordura mais rapidamente, efeitos que podem ser mais rapidamente alcançados com MuscleTech Phase 8 . Estimular a síntese proteica significa estimular o processo de construção muscular
Este documento proporciona instrucciones paso a paso para configurar y usar la plataforma WordPress para crear un sitio web educativo. Explica cómo acceder a WordPress, configurar un sitio, crear categorías y menús, agregar una entrada con texto e imágenes, y opciones para organizar imágenes en galerías. El objetivo es que los participantes del taller aprendan a utilizar WordPress para compartir recursos educativos en línea.
O documento contém várias músicas em inglês com palavras em português escritas por alunos da Santa Gemma High School. As músicas falam sobre amizade, amor, diversão e reflexões sobre a vida.
Este documento fornece um resumo do Sistema da Janela Única Electrónica das Alfândegas de Moçambique, incluindo: (1) Uma visão geral do projeto e resultados alcançados, como melhorias nos tempos de desembaraço; (2) Estatísticas sobre utilizadores formados e transações processadas; (3) Perspectivas para expansão da cobertura do sistema até o final de 2014.
Conference on environmental assessment and control. Seminar On Tools for the Implementation of Environmental Policies Alternatives for Myanmar. 6th October 2013
El documento describe los conceptos básicos de los fenómenos de interfase, incluyendo las definiciones de fase, superficie, interfase e interfacial. Explica los tipos de interfases como líquido-líquido y líquido-gas, y conceptos como tensión superficial, energía libre de superficie y ángulo de contacto. Finalmente, propone actividades para ilustrar estos fenómenos de interfase.
Apresentação da iv formação sea lucianaHeloiza Moura
O documento discute estratégias para o ensino da alfabetização, mencionando: 1) A importância de entender a escrita alfabética como um sistema notacional e não apenas a aquisição de um código; 2) Diferentes atividades para desenvolver a consciência fonológica, sistematização de correspondências som-grafia, fluência de leitura e produção de texto; 3) Propriedades do sistema de escrita alfabética que crianças precisam dominar para se alfabetizarem.
Este documento resume los diferentes tipos de material genético presente en procariotas como bacterias, incluyendo cromosomas bacterianos, plasmidios y elementos genéticos transponibles. Describe mecanismos de intercambio genético como la transformación, transducción y conjugación, los cuales permiten la transferencia horizontal de genes entre bacterias.
Este documento fornece estratégias para ler textos em inglês de forma eficaz, incluindo técnicas como skimming, scanning, ativação de conhecimento prévio e uso de dicionário como último recurso.
Este documento describe diferentes tipos de artefactos que pueden aparecer en imágenes de resonancia magnética. Los artefactos incluyen aquellos causados por inhomogeneidades en el campo magnético, diferencias en la susceptibilidad magnética entre tejidos, y desplazamientos químicos entre agua y grasa. La presencia de artefactos puede distorsionar las imágenes o conducir a un diagnóstico erróneo. Se proporcionan ejemplos de cada tipo de artefacto y posibles soluciones.
El documento habla sobre robos y fraudes informáticos. Define diferentes tipos de atacantes como hackers, crackers y phishers. Describe técnicas comunes como phishing, ingeniería social y sniffing. Explica el impacto de los ataques y formas de prevención como políticas de seguridad, firewalls y encriptación. Finalmente menciona algunas empresas y organizaciones dedicadas a la seguridad informática en Perú.
Liquid chromatography is a technique used to separate mixtures based on differential interactions between components and a stationary phase and mobile phase. It works by pumping a mobile liquid or gas phase through a column containing a stationary solid or liquid phase. The document discusses the history and basic principles of chromatography, different modes (liquid, gas), parameters used to characterize separations, and factors that influence separation efficiency and selectivity.
1) The document defines key concepts in phase diagrams including phases, phase boundaries, phase transformations, cooling curves, and how cooling curves relate to phase diagrams.
2) It discusses different types of phase diagrams including binary eutectic, binary eutectoid, and binary peritectic diagrams. It explains microstructural changes that occur during solidification for different alloy compositions in these systems.
3) The document provides details on constructing simple phase diagrams through experimental methods and interpreting phase diagram features such as liquidus lines, solidus lines, and lever rule calculations.
This document discusses phase diagrams and the phase rule. It provides definitions of key terms like phase, component, and degree of freedom. The phase rule states that the number of degrees of freedom F equals the number of components C minus the number of phases P plus 2. Examples are given to demonstrate how to count components and phases in different systems. Single and two-component phase diagrams are described, showing how temperature and pressure can be varied. Methods for experimentally measuring phase changes are also mentioned.
1. The phase diagram for a one-component water system shows three phases: ice, liquid water, and water vapor.
2. The diagram contains areas where single phases exist, lines where two phases are in equilibrium, and a single point where all three phases coexist at 0.01°C and 0.006 atm, known as the triple point.
3. The phase diagram uses temperature and pressure as axes to illustrate how changes in these variables impact the equilibrium between phases.
This document discusses phase diagrams and related concepts. It begins by asking questions about what equilibrium state and phases result from mixing two elements at a given composition and temperature. It then provides information on phase diagrams, including how they are constructed using cooling curve data from mixtures at different compositions. It discusses rules for determining phase information like number, composition, and amounts from a phase diagram given temperature and composition. Finally, it gives examples of an isomorphous system and eutectic system phase diagram.
This document provides thermodynamic and transport property data for several common fluids including water, steam, refrigerants, and gases. It includes tables of saturated liquid and vapor properties such as specific volume, enthalpy, and entropy. Additional tables provide properties for superheated steam, supercritical fluids, and gases at various pressures and temperatures. The document aims to serve as a reference for engineers and scientists working with these important industrial fluids.
The document discusses phase rule and its applications. It defines a phase as a homogeneous and physically distinct portion of a system. The number of components in a system is the minimum number needed to express the composition of each phase. The degrees of freedom is the number of independent variables needed to define the system in equilibrium. The phase rule states that the number of degrees of freedom is equal to the number of components minus the number of phases plus two. Several examples of calculating the number of phases, components, and degrees of freedom in different chemical systems are provided.
Lab 2 - The Phase Rule , binary phase -new.pptMihirMandal7
1. The Phase Rule relates the number of degrees of freedom (F) in a system to the number of components (C), phases (P), and intensive variables like pressure and temperature. F = C - P + 2.
2. A phase diagram graphs the stability ranges of phases as a function of intensive variables like pressure and temperature. It can show phase boundaries and invariant points.
3. Systems with a single component have limited degrees of freedom depending on the number of phases present. At an invariant point with 3 phases, there are no degrees of freedom.
4. Binary systems can have complete solid solutions, eutectic systems, or intermediate solid solutions depending on the components. Phase relationships are
This document contains exam questions about thermochemistry and intermolecular forces. Question 3 asks students to (a) write the reaction for the formation of zinc oxide and calculate the enthalpy change for the reaction of zinc sulfide heating in air, and (b) calculate the bond enthalpy of the O-H bond using data about the combustion of ethanol. Question 4 asks students to (a) write the equation for the enthalpy of fusion of zinc sulfide and explain why it is always positive, and (b) identify the different intermolecular forces in ethanol and propane that result in ethanol having a higher boiling point.
The document discusses the phase rule, which relates the degrees of freedom, number of components, and number of phases in a system at equilibrium. It defines key terms like phase diagram, phase boundary, component, and phase. The phase rule statement is f=c-p+2, where f is degrees of freedom, c is number of components, and p is number of phases. For a single-component system like water, this means the degrees of freedom is 2 when one phase is present, 1 when two phases coexist, and 0 when three phases are in equilibrium. Examples are also given for solid, liquid, and gas phases in water and metallurgical systems where pressure is constant.
The document discusses phase diagrams and the phase rule. It begins by defining key terms like phase, components, and degrees of freedom. It then explains Gibbs phase rule which relates the number of phases (P), components (C), and degrees of freedom (F) as F=C-P+2. Several examples of 1-component and 2-component phase diagrams are discussed. The document also covers concepts like true equilibrium, metastable equilibrium, and phase transitions. Phase diagrams show the conditions under which different phases can exist in equilibrium and include lines separating single phase and two phase regions.
This document summarizes a simulation of a steam coal gasifier using computational fluid dynamics (CFD) and plug flow modeling approaches. The CFD model tracks the fluid and particle phases using mass and momentum equations, while the plug flow model uses a material balance. Results show reasonable agreement between the models in predicting effluent concentrations. The plug flow model allows for faster investigation of a wider range of conditions, while CFD provides more detailed hydrodynamic insights but requires more time to set up and run. Both methods provide complementary understanding of gasifier performance.
The document discusses phase rule and its application to a one component water system. It defines phase rule and explains how it can be applied to determine the degrees of freedom in a water system containing solid, liquid, and gas phases of water. The key points are:
1) Phase rule relates the number of phases (P), components (C), and degrees of freedom (F) as F = C - P + 2.
2) In a one component water system, degrees of freedom can be 0, 1, or 2 depending on whether there are 3, 2, or 1 phases present respectively.
3) The phase diagram of a water system shows boundary curves where two phases coexist and areas where a
1. The document discusses phase diagrams and their construction, including basic concepts like phases, phase transformations, and phase boundaries.
2. It provides examples of different types of phase diagrams for binary alloy systems, including systems where the elements are fully miscible, partially miscible, or immiscible in the solid state.
3. Key features of phase diagrams like the liquidus line, solidus line, and lever rule are explained. Microstructural changes during solidification and concepts like microsegregation are also covered.
CHAPTER 9.1 - PHASE DIAGRAMS FOR METALLIC SYSTEMS.pdfMuhammadMirwazi
The document discusses phase diagrams and binary systems. It defines key terms like phase, components, and solubility limit. It explains how to interpret phase diagrams to determine the phases present, phase compositions, and phase fractions based on temperature and composition. Examples are given for interpreting isomorphous and eutectic systems like Cu-Ni and Pb-Sn using lever rule calculations. Microstructural changes during cooling are also discussed.
AS 90780 2010 particles and thermochemistryjohnwest
1) The document contains 4 questions regarding the properties of particles and thermochemical principles.
2) Question 1 involves completing tables with electron configurations, oxidation states of calcium and manganese, and atomic radii.
3) Question 2 involves drawing Lewis diagrams and shapes of SF4 and XeF4 molecules and discussing their different structures.
4) Question 3 calculates enthalpy changes using bond energies and enthalpies of formation.
5) Question 4 discusses enthalpies of fusion and compares the intermolecular forces and boiling points of ethanol, propane, butan-1-ol, and 2-methylpropan-2-ol.
This document discusses the classification and properties of solids, solutions and colligative properties, chemical thermodynamics and energetics, electrochemistry, chemical kinetics, isolation of elements, p-block elements, and corrosion. Key points include the different types of unit cells and packing efficiency in crystalline solids, concentration units for solutions, lowering of vapor pressure and freezing point depression as colligative properties, spontaneity of reactions based on Gibbs free energy, electrode potentials and cells, temperature dependence of reaction rates by the Arrhenius equation, extraction of metals like zinc and iron from their ores, and properties of p-block elements.
The document provides information on phase diagrams including:
- Phase diagrams represent the phases present in materials at different conditions of temperature, pressure, and composition. They indicate solubility, solidification ranges, and melting points.
- Pure substances have solid, liquid, and vapor phases separated by phase boundaries and coexisting at triple points, as shown in pressure-temperature diagrams.
- Binary alloy phase diagrams show the phases present at different compositions and temperatures, including solid solutions, eutectic points where two solids form from liquid, and peritectic reactions where a solid and liquid form a new solid phase.
- The Gibbs phase rule and lever rule are used to analyze multi-phase regions. Cool
The document provides information on phase diagrams including:
- Phase diagrams represent the phases present in materials at different conditions of temperature, pressure, and composition. They indicate solubility, solidification ranges, and melting points.
- Pure substances have solid, liquid, and vapor phases separated by phase boundaries and coexisting at triple points, as shown in pressure-temperature diagrams.
- Binary alloy phase diagrams show the phases present at different compositions and temperatures, including solid solutions, eutectic points where two solids form from liquid, and peritectic reactions where a solid and liquid form a new solid phase.
- The Gibbs phase rule and lever rule are used to analyze multi-phase regions. Cool
Phase diagram of a one component system ( water system )ShahriarTipu1
This document discusses phase diagrams and the phase rule through the example of a one-component water system. It defines key terms like phase, component, degree of freedom, and phase rule. It then explains the different areas and curves in the phase diagram of water, including that the liquid-vapor, ice-vapor, and ice-liquid curves represent univariant systems while the areas represent bivariant systems. It also notes the unique properties of the ice-liquid curve and the triple point where ice, liquid water, and vapor coexist in equilibrium.
The document discusses elimination reactions, specifically E1 and β-elimination reactions. It explains that E1 reactions proceed through a two-step unimolecular mechanism, with the first step being rate-determining. Factors that affect E1 reactions include the stability of the carbocation intermediate, steric effects, and the ability of the base to stabilize the carbocation. Rearrangements can also occur through carbocation migration to form more stable products.
Similar to Diagramas de Equilibrio e Transformações (20)
O documento discute o planejamento de projetos de pesquisa, definindo termos como planejamento, projeto, pesquisa e os tipos de problemas que podem ser abordados. Ele também fornece orientações sobre como transformar um interesse em um tópico e desenvolver perguntas de pesquisa a partir desse tópico, avaliando sua importância.
MRS2015 - Integrating Education-Society-Technology through Engineering Educat...Daphiny Pottmaier
In order to sustain an ever increasing economic growth, Brazil faces an important challenge of forming high level engineers and scientists. This was taken seriously by the Federal University of Santa Catarina/ Universidade Federal de Santa Catarina (UFSC) that resulted in the implementation of a cooperative course in Materials Engineering (GRADMAT) in 2000. Using this established and innovative model of engineering education, it has trained along the years a creative work force by interchanging academic periods (9 terms) with work terms (6 terms) in a total of five years (15 terms) for the completion of this undergraduate course. The week journey of the GRADMAT-UFSC students can vary from 9 to 22.5 hours during academic terms and fixed in 40 hours during work terms according to the regular Brazilian working journey. Within the last fifteen years, these remunerated internships were performed on an average of 78 % in industry and 22 % in research institutions. And in the last five years, more than 60% of the GRADMAT-UFSC students graduated with an internship abroad, mainly in Germany, France, and Portugal due to interchange agreements. Such early work experience makes our undergraduate course very effective on giving opportunity to students on career choices in scientific research, industry, and management with a better understanding of these professional realities. Another important contribution is the integration of Education-Society-Technology, where professors-students-workers have interconnected roles in the transformation of valuable information into fundamental and more applied knowledge. With this, we all become partners in continuous leaning and understanding of the relevancy of materials scientists and engineers in different contexts and from different perspectives.
Keywords: Materials Engineering, Cooperative course, Higher Education Curricula, Engineering education, Professional engagement.
Titulo: Pesquisadores em Movimento: rota Brasil-Europa
Facilitadora: Daphiny Pottmaier,
Pós-doutora pela UoN/ Nottingham, Inglaterra; doutora pela UNITO/ Turim, Italia; mestre pela TUHH/ Hamburgo, Alemanha; especialista pela UA/ Aveiro, Portugal; graduada pela UFSC/ Florianopolis, Brasil.
Alumna dos programas de financiamento europeus - Erasmus Mundus e Marie Curie - e do brasileiro - CAPES.
Data: 01/11
Horário: 10:20 - 11:50
Público: Todas as areas temáticas e níveis de carreira profissional/cientifica.
Objetivo: oferecer alternativas para os pesquisadores brasileiros/no Brasil conseguirem maior autonomia para criar rotas de mobilidade entre Brasil e Europa no desenvolvimento de pesquisa ou colaboração com pesquisadores europeus/ na Europa.
Metodologia: expositiva-vivencial
Resultados: contato da representante regional da EURAXESS Brazil and other Latin America and Caribbean countries (LAC) - para auxilio com propostas de mobilidade.
Aula com Exemplos de Aplicações.
Disciplina EMC5732 - Estrutura Cristalina de Solidos (/ Caracterização de Materiais 2), 2011/03, Prof. Ana Maria Maliska
Curso - Engenharia de Materiais
Departamento de Engenharia Mecânica
Universidade Federal de Santa Catarina
Ligas de Alumínio: Metalurgia Física, Propriedades Mecânicas e Aplicações na ...Daphiny Pottmaier
O documento discute ligas de alumínio, abordando suas propriedades, aplicações, metalurgia física e mecânica da fratura. Apresenta informações sobre a produção de alumínio no Brasil e no mundo, além de diagramas de fases comuns em ligas de alumínio.
O documento descreve o método de Rietveld para análise de difração de raios-X, incluindo a amostra, experimento, difratograma, refinamento e informações obtidas. O método fornece informações qualitativas e quantitativas sobre a estrutura cristalina e microestrutura da amostra.
Aula de Fundamentos.
Disciplina EMC5732 - Estrutura Cristalina de Solidos (/ Caracterização de Materiais 2), 2011/03, Prof. Ana Maria Maliska
Curso - Engenharia de Materiais
Departamento de Engenharia Mecânica
Universidade Federal de Santa Catarina
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.pptHenry Hollis
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...indexPub
The recent surge in pro-Palestine student activism has prompted significant responses from universities, ranging from negotiations and divestment commitments to increased transparency about investments in companies supporting the war on Gaza. This activism has led to the cessation of student encampments but also highlighted the substantial sacrifices made by students, including academic disruptions and personal risks. The primary drivers of these protests are poor university administration, lack of transparency, and inadequate communication between officials and students. This study examines the profound emotional, psychological, and professional impacts on students engaged in pro-Palestine protests, focusing on Generation Z's (Gen-Z) activism dynamics. This paper explores the significant sacrifices made by these students and even the professors supporting the pro-Palestine movement, with a focus on recent global movements. Through an in-depth analysis of printed and electronic media, the study examines the impacts of these sacrifices on the academic and personal lives of those involved. The paper highlights examples from various universities, demonstrating student activism's long-term and short-term effects, including disciplinary actions, social backlash, and career implications. The researchers also explore the broader implications of student sacrifices. The findings reveal that these sacrifices are driven by a profound commitment to justice and human rights, and are influenced by the increasing availability of information, peer interactions, and personal convictions. The study also discusses the broader implications of this activism, comparing it to historical precedents and assessing its potential to influence policy and public opinion. The emotional and psychological toll on student activists is significant, but their sense of purpose and community support mitigates some of these challenges. However, the researchers call for acknowledging the broader Impact of these sacrifices on the future global movement of FreePalestine.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...TechSoup
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Diagramas de Equilibrio e Transformações
1. Diagramas de Equilíbrio
e Transformacoes
Composicao + Processamento = Microestrutura + Propriedades
EMC5712-Materiais e Microestrutura
Prof. Wendhausen
Daphiny Pottmaier, posdoc
Fonte figuras: Callister 7ed.
Agosto & Dezembro 2011.
2. GOL
• Esbocar diagramas de fases simples (isomorfos,
euteticos e eutetoides);
• Identificar as regioes de fases, linhas liquidus-
solvus-solidus e pontos de coexistencia;
• Calcular composicoes das fases (linha de
amarracao) e fracoes massicas (regra da alavanca);
• Localizar as temperaturas e composicoes das
transformacoes (pontos/linhas);
• Escrever as reacoes para as transformacoes e
desenvolvimento das microestruturas.
7. Diagramas de Fases/Equilibrio
Mapas para Determinação da Microestrutura
Representação gráfica de dados:
informações sobre os compostos puros
natureza das interações entre mais de um componente
Informações disponíveis diretamente no diagrama:
Tf de cada componente puro
redução de Tf pela mistura de 2 ou mais componentes
interação de dois componentes (Fe + C) para
formar um terceiro (Fe3C )
presença e grau de solubilidade sólida
efeito da temperatura na solubilidade sólida
temperatura de transformação polimórfica
quantidade e composição das fases líquidas e sólidas a
temperatura e composição química global específica
presença de líquidos imiscíveis a altas temperaturas
8. DIAGRAMAS DE EQUILIBRIO
Representacoes graficas dos estados de equilibrio disponivel para
um sistema e a influencia dos estados de equilibrio com a
composicao (X), temperatura (T) e pressao (P).
Equilibrio se X, T e p sao
estaveis, nao muda com o tempo.
Descrito termodinamicamente
como o estado do sistema dado
pela minima energia livre (G).
9. CONCEITOS
Componente: elementos quimicos e compostos
estoiquiometricos (Al, H2O, Cu, Fe3C) 8
Chapter
Sistema: categorizado pelo numero de componentes
unario, binario, ternario, quaternario Chapter 8
Phase Diagrams
Fase: caracteristicas fisicasae quimicas (solidos),
A phase in a material is region that differ in its microstructure and
miscibilidade (liquidos) another region (gases)
or composition from e uniforme Phase Diagram
Homogeneo x Heterogeneo in a material is a region that differ in its mic
A phase
or composition from another region
Solucao: solvente e soluto
Limite de Solubilidade
Al2CuMg
Al2CuMg H2O(solid, ice) in H2O
Al
(liquid) ! 2 phases
H2O(so
Al
• homogeneous in crystal structure and atomic arrangement (liquid
• have same chemicalhomogeneous in crystal structure and atomic arra
• and physical properties throughout
10. DIAGRAMA UNARIO
composicao quimica fixa,
T e P variaveis
100 fusao
Liquido
congelamento
evaporacao
H2O
3 fases: solido,
condensacao
liquido, gas.
1 Solido
Pressao [atm]
Ponto triplo:
sublimacao
Gas 0.0098 °C,
deposicao
0.0063 atm.
0 100 Regiao: 1 fase
Temperatura [°C] Linha: 2 fases
SI: Kelvin, Pascal Ponto: 3 fases
12. ALOTROPIA
composicao
quimica fixa,
T e P variaveis
I - XV: alotropos
do gelo.
H2O
13. ENERGIA LIVRE
Gsolido
G [kJ/mol]
G(T,p)= H - T.S
H = Href + ∫CpdT
Gliquido
S = Sref + ∫CpdlnT
Ggas
H2O
0 100 Temperatura [°C]
P=1 atm
14. LEI DAS FASES DE GIBBS
Graus de liberdade (F) de um sistema fechado em equilibrio, em
termos de fases separadas (P) e componentes quimicos (C) e
variaveis do processo (N).
100
Liquido
F+P=C+N
(i)
H2O, C = 1
(ii)
1 Solido (iii) (i) P = 1, F = 2
(ii) P = 2, F = 1
Pressao [atm]
Gas
(iii) P = 3, F = 0
0 100 Temperatura [°C] F: freedom, P: phase
15. Solubility Limit: Water-Sugar
Solubilidade do Açúcar em Água
• Changing T can change # of phases: path A to B.
• Changing Co can change # of phases: path B to D
B (100,70) D(100,90)
1 phase 2 phases
10 0
80 L
(liquid)
Temperature (°C)
60 +
L S
(liquid solution (solid
40 i.e., syrup) sugar)
20 A(70, 20 ) T : B-D
2 phases C : B-A
0
0 20 40 60 70 80 10 0
C o =Composition (wt% sugar) Adapted from Callister
Chapter 8
16. Sistemas Eutéticos Binários
Concept Check 9.5
(SEM solubilidade no estadoO–NaClEx: NaCl-H2O)
Below is a portion of the H2 sólido phase diagram:
10 50
Liquid
(brine) 40
0
30
Salt
Temperature (°C)
Temperature (°C)
ϩ
Ice 20
Liquid
ϩ (brine)
Ϫ10
Liquid
(brine) 10
0
Ϫ20
Ϫ10
Ice ϩ Salt
Ϫ20
Ϫ30
NaCl 0 10 20 30
H2O 100 90 80 70
Composition (wt%)
17. SOLUBILIDADE SÓLIDA
ELEMENTOS PUROS
Regra Hume-Rothery:
•Razao raio atomico (± 15%)
•Estrutura cristalina
•Eletronegatividade (± 0.4 e.u.)
•Mesma Valencia
20. REGRA DA ALAVANCA
R Co S
α
L
Wα = S/(R+S) = Co - CL / Cα - CL
WL = R/(R+S) = Cα - Co / Cα - CL
21. SISTEMA ISOMORFO Cu-Ni 9.7 Binary Isomorphous Systems • 259
Figure 9.3 (a) The Composition (at% Ni)
copper–nickel phase
0 20 40 60 80 100
diagram. (b) A 1600
portion of the
copper–nickel phase 2800
diagram for which
1500
compositions and
phase amounts are Liquid 1453°C
determined at point 2600
B. (Adapted from 1400
Phase Diagrams of
Temperature (°C)
Temperature (°F)
Binary Nickel Alloys, Solidus line
P. Nash, Editor, 1991. Liquidus line
2400
1300 ␣ +L
Reprinted by
permission of ASM
B
International,
Materials Park, OH.) 1200 ␣
2200
1100 A 2000
1085°C
1000
0 20 40 60 80 100
(Cu) Composition (wt% Ni) (Ni)
(a)
22. 6T_c09_252-310 11/29/05 11:33 Page 265
REVISED PAGES
DIAGRAMA Cu-Ni
Composição9.9 Development das Fases -Isomorphous Alloys • 265
Química of Microstructure in Equilíbrio
Figure 9.4
Schematic
L
representation of the L L
development of (35 Ni) (35 Ni)
microstructure ␣ (46 Ni)
during the 1300 a ␣
equilibrium +
L
solidification of a
35 wt% Ni–65 wt%
Cu alloy.
L (32 Ni) b
␣ (46 Ni)
c
Temperature (°C)
␣ (43 Ni) ␣ (43 Ni)
L (24 Ni)
d ␣
␣
L (32 Ni) ␣ ␣
1200 ␣
e L (24 Ni)
␣ ␣
␣
␣ (35 Ni) ␣ ␣ ␣
␣
␣ ␣
␣
␣
␣
␣ ␣
␣
␣ (35 Ni) ␣
1100
20 30 40 50
Composition (wt% Ni)
25. alloys are affected by composition as other structural variables (e.g., grain size) are
Sistemas Isomorfos
held constant. For all temperatures and compositions below the melting tempera-
ture of the lowest-melting component, only a single solid phase will exist. There-
fore, each component will experience solid-solution strengthening (Section 7.9), or
(Propriedades Mecânicas)
an increase in strength and hardness by additions of the other component. This
effect is demonstrated in Figure 9.6a as tensile strength versus composition for the
60
Elongation (% in 50 mm [2 in.])
60
400
Tensile strength (MPa)
50
Tensile strength (ksi)
50
40
300
40
30
200 30
20
0 20 40 60 80 100 0 20 40 60 80 100
(Cu) (Ni) (Cu) (Ni)
Composition (wt% Ni) Composition (wt% Ni)
(a) (b)
Figure 9.6 For the copper–nickel system, (a) tensile strength versus composition, and
(b) ductility (%EL) versus composition at room temperature. A solid solution exists over
all compositions for this system.
28. molten at about 185ЊC (365ЊF), which makes this material especially attractive as a
SISTEMA EUTETICO Pb-Sn
low-temperature solder, since it is easily melted.
Composition (at% Sn)
0 20 40 60 80 100
327°C
600
300
Liquid
500
232°C
␣ +L
Temperature (°C)
Temperature (°F)
200 ␣  +L 400
183°C

18.3 61.9 97.8
300
100 ␣ +  200
100
0
0 20 40 60 80 100
(Pb) Composition (wt% Sn) (Sn)
29. tion at the point where ww¿ crosses the solidus line. The resulting alloy is poly-
crystalline with a uniform composition of C1, and no subsequent changes will occur
DIAGRAMA Pb-Sn
400 Figure 9.11 Schematic
L
representations of the
w
(C1 wt% Sn)
equilibrium microstructures for
␣
a lead–tin alloy of composition
a L
b L C1 as it is cooled from the
liquid-phase region.
300
Liquidus
c
␣ ␣
␣ +L
Temperature (°C)
␣ ␣
Solidus
200
(C1 wt% Sn)
␣
100
␣ +
wЈ
0 10 20 30
C1 Composition (wt% Sn)
31. (C3 in Figure 9.13). Consider an alloy having this composition that is cooled from
a temperature within the liquid-phase region (e.g., 250ЊC) down the vertical line yy¿
SISTEMA EUTETICO Pb-Sn
Figure 9.12 Schematic
representations of the
x equilibrium microstructures
L
d L for a lead–tin alloy of
(C2 wt% Sn) composition C2 as it is cooled
from the liquid-phase region.
300
L ␣
e
␣ ␣
␣ +L
Temperature (°C)
␣
200 ␣ ␣ C2 wt% Sn
f

Solvus
line
g
␣
100
␣ +
xЈ
0 10 20 30 40 50
C2
Composition (wt% Sn)
32. 1496T_c09_252-310 1/9/06 13:00 Page 280
2nd REVISE PAG
DIAGRAMA Pb-Sn
280 • Chapter 9 / Phase Diagrams (liga hipoeutética)
L
(C4 wt% Sn)
z
j ␣ 600
300
L
␣ +L
L 500
␣ (18.3
wt% Sn) k
Temperature (°C)
Temperature (°F)
200 400
 +L
␣ l 
m
L (61.9 wt% Sn) Eutectic
structure 300
Primary ␣
␣ +  (18.3 wt% Sn)
100
200
 (97.8 wt% Sn)
Eutectic ␣
(18.3 wt% Sn)
100
zЈ
0
0 20 60 80 100
(Pb) C4 (Sn)
(40)
Composition (wt% Sn)
Figure 9.16 Schematic representations of the equilibrium microstructures for a lead–tin
34. Representação Esquemática
phase field. To distinguish one a from the other, that which resides in th
eutectic phase structure is called eutectic a, while the other that formed prior to cro
eutectic isotherm is termed primary a; both are labeled in Figure
primary phase
Reação Eutética
photomicrograph in Figure 9.17 is of a lead–tin alloy in which both prim
eutectic structures are shown.
Figure 9.15 Schematic represen
the formation of the eutectic str
 Pb the lead–tin system. Directions o
of tin and lead atoms are indicat
blue and red arrows, respectively
␣ Sn Liquid
 Pb
␣ Sn Eutectic
growth
direction
 Pb
35. apter 9 / Phase Diagrams DIAGRAMA Pb-Sn
gure 9.13
chematic
ations of 600
300 y L
uilibrium (61.9 wt%
res for a Sn)
n alloy of L 500
h
mposition ␣ +L
nd below
Temperature (°C)
Temperature (°F)
eutectic 200 ␣ 183°C
+L  400
perature. 18.3 i 97.8
300
100 ␣+
200
␣ (18.3 wt%  (97.8 wt%
Sn) Sn)
100
yЈ
0
0 20 40 60 80 100
(Pb) C3 (Sn)
(61.9)
Composition (wt%Sn)
37. ENERGIA LIVRE
H = Href + ∫CpdT S = Sref + ∫CpdlnT
γ 1400˚
G(T,p)= H - T.S
Fe3C
G [kJ/mol]
L
G
Gccc Gliquido Eutetico
1147˚
Gcfc
γ
L Fe3C
G
Fe L
T
γ
912 1394 1538 γ + Fe3C
α
α + Fe3C
Temperatura [°C]
P=1 atm Fe C
% Eutetico
38. austenite
912ЊC (1674ЊF). This austenite persists to 1394ЊC (2541ЊF), at which tem
SISTEMA EUTETOIDE Fe-C
the FCC austenite reverts back to a BCC phase known as d ferrite, whic
Composition (at% C)
0 5 10 15 20 25
1600
1538°C
1493°C
␦ L
1400
2500
1394°C ␥+L
1200
1147°C
Temperature (°C)
Temperature (°F)
2.14 4.30
␥, Austenite 2000
1000
912°C ␥ + Fe3C
800 ␣ 1500
+ 727°C
␥
0.76
0.022
600 ␣ + Fe3C
␣, Ferrite
Cementite (Fe3C) 1000
400
0 1 2 3 4 5 6 6.70
(Fe) Composition (wt% C)
39. Microestruturas Fe-C
9.18 The Iron–Iron Carbide (Fe–Fe3C) Phase Diagram • 291
e 9.25
phs of
(90ϫ)
tenite
yright
nited
Steel
tion.)
(a) (b)
Microestrutura Ferrita α Microestrutura Austenita
melts at 1538ЊC (2800ЊF). All these changes are apparent along the left vertical axis
1
40. Section 9.12 and illustrated in Figure 9.16 for the eutectic system. Consider a com-
DIAGRAMA Fe-C
position C0 to the left of the eutectoid, between 0.022 and 0.76 wt% C; this is termed
hypoeutectoid alloy a hypoeutectoid (less than eutectoid) alloy. Cooling an alloy of this composition is
represented by moving down the vertical line yy¿ in Figure 9.29. At about 875ЊC ,
(liga hipoeutetoide)
point c, the microstructure will consist entirely of grains of the g phase, as shown
1100 Figure 9.29 Schematic
␥
representations of the
␥
microstructures for an
␥
␥ iron–carbon alloy of
1000
␥ hypoeutectoid composition C0
␥ + Fe3C (containing less than 0.76 wt%
y ␥
M
␥ C) as it is cooled from within
900 the austenite phase region to
␥ ␣
c ␥ below the eutectoid
temperature.
Temperature (°C)
␥
800 ␥
d
␥ ␥
e
Te N
f O
700
␣ Pearlite
600 Fe3C
Proeutectoid ␣
Eutectoid ␣
500 ␣ + Fe3C
yЈ
400
0 1.0 2.0
C0 Composition (wt% C)
41. from grain to grain; some of the pearlite appears dark because the many close
spaced layers are unresolved at the magnification of the photomicrograph. The
MICROESTRUTURA HIPOEUTETOIDE
0
h
C
a
e
e
d Proeutectoid
ϫ. ferrite
h
c
.)
Pearlite
42. Representação Esquemática
Reação Eutetoide
9.19 Development of Microstructure in Iron–Carbo
Austenite grain Figure 9.28
boundary
representatio
formation of
austenite; dir
␣ diffusion ind
Ferrite (␣)
Austenite
(␥ )
Austenite Ferrite (␣)
(␥ )
Ferrite (␣)
Cementite Growth direction
(Fe3C) Ferrite (␣) of pearlite
␣
Carbon diffusion
43. phase field (Figure 9.24) are relatively complex and similar to those described for
the eutectic systems in Section 9.12. Consider, for example, an alloy of eutectoid
DIAGRAMA Fe-C
composition (0.76 wt% C) as it is cooled from a temperature within the g phase re-
gion, say, 800ЊC—that is, beginning at point a in Figure 9.26 and moving down the
1100 Figure 9.26 Schematic
representations of the
microstructures for an
iron–carbon alloy of eutectoid
1000 ␥
␥ + Fe3C composition (0.76 wt% C) above
and below the eutectoid
temperature.
900
x ␥ ␥
Temperature (°C)
␥
800 a ␥
␣ +␥
727°C
b ␣
700
␣
600
Fe3C
500 ␣ + Fe3C
xЈ
400
0 1.0 2.0
Composition (wt% C)
45. 2nd REVISE PAGE
DIAGRAMA Fe-C
298 • Chapter 9 / Phase Diagrams (liga hipereutetoide)
1100
P
Figure 9.32 Schematic
representations of the
␥ + Fe3C microstructures for an
iron–carbon alloy of
1000 ␥
z hypereutectoid composition
␥
␥ C1 (containing between 0.76
␥
g and 2.14 wt% C), as it is
␥
900 cooled from within the
Fe3C austenite phase region to
␥ below the eutectoid
␥ temperature.
Temperature (°C)
800 ␥
h
␥
␣ +␥
O i
700
␣
Pearlite
600 ␣
Proeutectoid
Fe3C Eutectoid Fe3C
500
␣ + Fe3C
z'
400
0 1.0 2.0
C1
Composition (wt% C)
46. MICROESTRUTURA of Microstructure in Iron–Carbon A
9.19 Development HIPEREUTETOIDE
gure 9.33
crograph
4 wt% C
having a
structure
f a white
eutectoid
network
nding the Proeutectoid
cementite
colonies.
opyright
y United
tes Steel
oration.)
Pearlite
53. eutectoid reaction but also the relative fra
Influencia de outros Elementos phase that form. Steels are normally alloy
either to improve their corrosion resistan
treatment (see Section 11.8).
9.20 The Influence of Other Alloying Elements • 301
Figure 9.34 The dependence of Figu
Ti 2400
0.8 eutectoid temperature on alloy com
Mo W Ni
1200 2200 concentration for several alloying for
Eutectoid temperature (°C)
Eutectoid temperature (°F)
Eutectoid composition (wt% C)
Si
elements in steel. (From Edgar C. Edg
2000 0.6
Bain, Functions of the Alloying Elem
1000 American Society 1939
Elements in Steel,Cr
1800
Cr
1600 0.4 for Metals, 1939, p. 127.)
800 Si
1400 Mo Mn
0.2 W
Mn 1200 Ti
600
Ni 1000
0
0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 14
Concentration of alloying elements (wt%) Concentration of alloying elements (wt%)
Temperatura Eutetoide Composicao Eutetoide
existence at room temperature of nonequilibrium phases that do not appear on the
54. required for the transformation to proceed halfway to completion, t0.5, or
Transformation
rate—reciprocal of 1
rate ϭ (10.18)
the halfway-to- t0.5
TEMPO-TEMPERATURA-TRANSFORMAÇÃO
completion
transformation time Temperature will have a profound influence on the kinetics and thus on the
10_311-357 11/30/05 7:37 Page 323 rate of a transformation. This is PAGES
REVISED demonstrated in Figure 10.11, where y-versus-log t
100
:37 Page 323
termodinamicamente REVISED PAGES
Percent recrystallized
80
como o estado do sistema The Kinetics of Phase Transformations • 323
10.3
60 135ЊC 119ЊC 113ЊC 102ЊC 88ЊC 43ЊC
dado pela minima energia 1.0
Figure 10.10 Plot of fraction
reacted versus the logarithm of
40
time typical of many solid-state 20
livre (G).
Fraction of transformation, y
transformations in which
temperature is held constant. 0
2
104
10.3 The Kinetics of Phase Transformations • 323
1 10 10
Time (min)
0.5
(Logarithmic scale)
1.0 Figure 10.11 Percent recrystallization as a function of time and at constant
Figure 10.10 Plot of fraction
temperature for pure copper. (Reprinted with permission from Metallurgical
Representacoes graficas dos
t0.5
reacted versus the logarithm of
Transactions, Vol. 188, 1950, a publication of The Metallurgical Society of AIME,
time typical of many solid-state
Warrendale, PA. Adapted from B. F. Decker and D. Harker, “Recrystallization in Rolled
Fraction of transformation, y
0
Nucleation
estados da CINETICA de
Growth
transformations in which
Copper,” Trans. AIME, 188, 1950, p. 888.)
temperature is held constant.
transformacao para um sistema
Logarithm of heating time, t
formed material versus the logarithm of time; an S-shaped emsimilar to that in do tempo (t).
curve funcao
0.5 of which is distinctive of the new phase. Data are plotted as the fraction of trans-
Figure 10.10 represents the typical kinetic behavior for most solid-state reactions.
Nucleation and growth stages are also indicated in the figure.
For solid-state transformations displaying the kinetic behavior in Figure 10.10,
the fraction of transformation y is a function of time t as follows:
t0.5 y ϭ 1 Ϫ exp1Ϫkt 2
Avrami equation— n
dependence of (10.17)
fraction 0
of
transformation where k and n are time-independent constants for the particular reaction. The above
on time Nucleation
expression is often Growth to as the Avrami equation.
referred
By convention, the rate of a transformation is taken as the reciprocal of time
required for the of heating time, tproceed halfway to completion, t0.5, or
Logarithm transformation to
Transformation
rate—reciprocal of 1
rate ϭ (10.18)
55. CONCEITOS
Transformacao de fase: difusiva ou displaciva.
Difusiva: solidificacao, alotropicas, recristalizacao,
crescimento de grao, etc.
Ponto de vista microestrutural:
Nucleacao: Homogenea x Heterogenea
Crescimento:
Displaciva/martensitica: sem difusao, metaestavel.
Cinetica: velocidade (tempo) - mecanismo.
56. ters 10 and 11.
system has been chosen because it is familiar and because a wide variety
crostructures and mechanical properties are possible for iron–carbon (or steel)
9.18 THE IRON–IRON CARBIDE (Fe–Fe3C)
Diagrama TTT Fe-C eutetoide
PHASE DIAGRAM
10.5 ISOTHERMAL TRANSFORMATION DIAGRAMS diagram is presented in Figure
A portion of the iron–carbon phase
Pearlite upon heating, experiences two changes in crystal structure before it
ferrite temperature the stable form, called ferrite, or a iron, has a BCC c
ter 10 / Phase Transformations in Metals Consider again the
austenite
iron–iron carbide eutectoid reaction
Ferrite experiences a polymorphic transformation to FCC austeni
912ЊC (1674ЊF). This austenite persists to 1394ЊC (2541ЊF), at whi
Eutectoid reaction the FCC austenite reverts back to a BCC phase known as d ferrit
cooling
for the iron-iron
100 carbide system Figure 10.13 ∆ a10.022 wt% C2 ϩ Fe3C16.70 wt% C2 (1
g10.76 wt% C2
heating
transformed to pearlite
Demonstration of how Composition (at% C)
Percent of austenite
Transformation Transformation
which is fundamental to the development of microstructure in steel alloys.
an isothermal 5
0 10 15 20 25
temperature 675°C ends 1600
cooling, austenite, having an intermediate carbon concentration, transforms to
1538°C
50
transformation diagram1493°C
rite phase, having a much lower carbon content, and also cementite, with a
(bottom)␦ is generated L
higher carbon concentration. Pearlite is one microstructural product of this
1400
2500
Transformation from percentage ␥ + L
formation (Figure1394°C and the mechanism of pearlite formation was disc
9.27),
begins previously (Section 9.19) and demonstrated in Figure 9.28.
transformation-versus- 1147°C
1200
Temperature plays an important role in the rate of the austenite-to-pe
0 logarithm Austenite
␥, of time
105 transformation. The temperature dependence for an iron–carbon alloy of2000 eute
Temperature (°C)
2.14 4.30
1 10 102 103 104
measurements (top).
composition is indicated in Figure 10.12, which plots S-shaped curves of the
1000
Time (s) centage transformation versus the logarithm of time at three different tempera
[Adapted from H.
912°C ␥ + Fe C 3
For each curve, data were collected after rapidly cooling a specimen compos
Boyer, ␣
800 (Editor), Atlas
100% austenite to the temperature indicated; that temperature was maintained
+
1500
727°C
of Isothermal ␥
stant throughout the course of the reaction.
0.76
1400 A more convenient way of representing both the time and temperatur
Austenite (stable) Eutectoid temperature Transformation and 0.022
pendence of600 transformation is in the+ bottom portion of Figure 10.13. Her
this ␣, Ferrite ␣ Fe C 3
Austenite Cooling Transformation
vertical and horizontal axes are, respectively, temperature and the logarithm of
Cementite (Fe C) 1000 3
700
(unstable) Diagrams, American
Two solid curves are plotted; one represents the time required at each temper
400
initiation for Metals,21977, 3
0 1 4
1200 the Society or start of the transformation; C) other is for the transform
for (Fe) Composition (wt%
the 5 6 6.70
Pearlite conclusion. The dashed curve 9.24 The iron–iron carbide phase transformation compl
Figure corresponds to 50% of diagram. [Adapted from Binary
Temperature (°C)
Temperature (°F)
p. 369.]
These curves were generated from a series of T. B. Massalski (Editor-in-Chief), 1990. Repr
Diagrams, 2nd edition, Vol. 1, plots of the percentage transfo
600 permission of ASM International, Materials Park, OH.]
tion versus the logarithm of time taken over a range of temperatures. The S-sh
50% Completion curve
curve [for 675ЊC (1247ЊF)], in the upper portion of Figure 10.13, illustrates ho
1000
data transfer is made.
In interpreting this diagram, note first that the eutectoid temperature [
500 Completion curve
(~100% pearlite) (1341ЊF)] is indicated by a horizontal line; at temperatures above the eutecto
Begin curve 800 100 0 Figure 10.12 For
(~ 0% pearlite) iron–carbon alloy
400 eutectoid composi
(0.76 wt% C),
isothermal fractio
cent austenite
102 103 104 105
rcent pearlite
1 10 reacted versus the
Time (s) 50 600°C 650°C 675°C 50 logarithm of time
the austenite-to-p
57. 2nd REVISE PAGES
system has been chosen because it is familiar and because a wide variety
crostructures and mechanical properties are possible for iron–carbon (or steel)
Diagrama TTT Fe-C (perlita) 10.5 ISOTHERMAL TRANSFORMATION DIAGRAMS
Pearlite
Consider again the iron–iron carbide eutectoid reaction
Eutectoid reaction
10.5 Isothermal Transformation Diagrams a10.022327C2 ϩ Fe3C16.70 wt% C2
for the iron-iron g10.76 wt% C2 ∆ • wt%
cooling
(1
carbide system heating
1s 1 min which is fundamental to the development of microstructure in steel alloys.
1h 1 day
cooling, austenite, having an intermediate carbon concentration, transforms to
rite phase, having a much lower carbon content, and also cementite, with a
Eutectoid 1400
A ␥ Austenite (stable) higher carbon concentration. Pearlite is one microstructural product of this
temperature
727°C formation (Figure 9.27), and the mechanism of pearlite formation was disc
previously (Section 9.19) and demonstrated in Figure 9.28.
Temperature plays an important role in the rate of the austenite-to-pe
700 ␥ ␥ ␥ ␥ transformation. The temperature dependence for an iron–carbon alloy of eute
composition is indicated in Figure 10.12, which plots S-shaped curves of the
␥ ␥ ␣ Ferrite transformation versus the logarithm of time at three different tempera
centage Coarse pearlite
For each curve, data were collected after rapidly cooling a specimen compos
100% austenite to the temperature indicated; that temperature was maintained
1200
C stant throughout the course of the reaction.
Temperature (°C)
Temperature (°F)
A more convenient way of representing both the time and temperatur
B D pendence of this transformation is in the bottom portion of Figure 10.13. Her
600 Fe3C
vertical and horizontal axes are, respectively, temperature and the logarithm of
Two solid curves are plotted; one represents the time required at each temper
for the initiation or start of the transformation; the other is for the transform
Fine pearlite conclusion. The dashed curve corresponds to 50% of transformation compl
These curves were generated from a series of plots of the percentage transfo
tion versus the logarithm of time taken over a range of temperatures. The S-sh
1000
curve [for 675ЊC (1247ЊF)], in the upper portion of Figure 10.13, illustrates ho
data transfer is made.
Austenite → pearlite
500
transformation Denotes thatinterpreting this diagram, note first that the eutectoid temperature [
In a transformation
(1341ЊF)] is indicated by a horizontal line; at temperatures above the eutecto
is occurring
100 0 Figure 10.12 For
iron–carbon alloy
800 eutectoid composi
(0.76 wt% C),
1 10 102 103 104 105 isothermal fractio
cent austenite
rcent pearlite
reacted versus the
Time (s) 50 600°C 650°C 675°C 50 logarithm of time
the austenite-to-p