Diagram of an elevator
•Download as PPTX, PDF•
5 likes•8,435 views
This diagram shows the key components of a typical overhead traction elevator, including the elevator machine, controller, selector, hoist ropes, cab, car guiding rails, counterweight, safety devices like limit switches and buffers, and components that control speed and movement like the selector driving tape, overspeed governor, and door operator.
Report
Share
Report
Share
Recommended
Elevators and its types
This document discusses different types of elevators, including traction and hydraulic elevators. It covers the history of lifts and how modern lift components remain largely the same. Traction elevators can be geared or gearless, while hydraulic elevators are either holed or holeless. The document examines lift applications for different building types like offices, hotels, hospitals and residential buildings. It also discusses lift operation modes, comfort factors, and components of elevator systems.
Lifts
This document discusses lifts (elevators) and their importance in buildings. It covers the basic components and types of lifts, including traction and hydraulic elevators. It describes performance criteria for ideal lift operation and categories of lifts according to their function, such as for trade, hospitals, residences and stores. Key lift components are outlined for both traction and hydraulic systems. Design considerations for lift installation and sizing are also summarized.
Vertical Transportation Systems in Buildings by Ramesh Nayaka
This document provides information about vertical transportation in buildings, focusing on stairs and elevators. It defines stairs and their key components such as treads, risers, and handrails. It describes different types of stairs including straight, dog-legged, and spiral. Design considerations for stairs like width, headroom, and dimensional standards are covered. Common materials for stair construction like timber, stone, concrete, and their properties are discussed. Elevator components like the machine room, hoistway, cabs, and controllers are defined. The main types of elevator systems - traction and hydraulic - are outlined.
Lifts
This document provides information on lifts, escalators, and the differences between the two. It defines a lift as a type of vertical transport equipment that moves people or goods between floors of a building. Basic lift components and terminology are explained. The main types of lifts are described as passenger, goods, vehicle, dumbwaiter, and scissor lifts. Escalators are defined as moving staircases that transport people between floors. Escalator components and operating mechanisms are outlined. Applications of lifts and escalators in buildings are listed. The key differences between lifts and escalators are vertical versus horizontal movement, enclosed spaces versus open steps, and relative speeds.
Elevators and escalators
This document provides information about special types of elevators. It begins with a basic introduction to elevators and their functions. It then discusses the history of elevator development. Key developments included early screw drive systems, safety brakes to prevent falls, and the introduction of electric power. The document outlines various elevator designs and components. These include the cab, doors, hoist mechanisms, and control systems. It also discusses different types of elevators for passengers, goods, automobiles, and more. Standards and regulations for elevator design are also reviewed.
Lifts
Lifts, also known as elevators, are appliances that transport people or materials vertically between floors of a building. There are two main types of lifts based on power supply: hydraulic lifts, which use hydraulic fluid pressure, and traction lifts (also called machine lifts), which use electric motors and ropes to raise and lower the elevator car. Lifts can also be classified based on their intended use as passenger lifts for transporting people, goods lifts for heavy items, vehicle lifts for cars, scissor lifts for construction work, and dumbwaiters for transporting small loads between floors. Proper maintenance including lubrication, cleaning, and safety inspections is important to ensure safe operation of lifts over time.
Lifts & Escalators
The document discusses lifts and escalators, including their history, components, types, and maintenance requirements. It notes that lifts have been used since the 3rd century BC and the first passenger elevator was built in 1743. Modern lifts are controlled automatically using computers and microchips. Escalators were introduced in 1900 and are used to transport large numbers of people vertically between floors. Proper maintenance of lifts and compliance with acts like the Bombay Lift Acts are important for safety.
LIFT/ELEVATOR
The document provides information on different types of lifts/elevators. It begins with an introduction to lifts, describing their basic function of transporting people or goods between floors. It then discusses the history and development of lifts. The bulk of the document categorizes lifts according to their hoisting mechanism, building height, building type, location, and special uses. It provides examples and descriptions for each category. The document concludes by discussing lift components, electrical components, typical designs, and lift shafts.
Recommended
Elevators and its types
This document discusses different types of elevators, including traction and hydraulic elevators. It covers the history of lifts and how modern lift components remain largely the same. Traction elevators can be geared or gearless, while hydraulic elevators are either holed or holeless. The document examines lift applications for different building types like offices, hotels, hospitals and residential buildings. It also discusses lift operation modes, comfort factors, and components of elevator systems.
Lifts
This document discusses lifts (elevators) and their importance in buildings. It covers the basic components and types of lifts, including traction and hydraulic elevators. It describes performance criteria for ideal lift operation and categories of lifts according to their function, such as for trade, hospitals, residences and stores. Key lift components are outlined for both traction and hydraulic systems. Design considerations for lift installation and sizing are also summarized.
Vertical Transportation Systems in Buildings by Ramesh Nayaka
This document provides information about vertical transportation in buildings, focusing on stairs and elevators. It defines stairs and their key components such as treads, risers, and handrails. It describes different types of stairs including straight, dog-legged, and spiral. Design considerations for stairs like width, headroom, and dimensional standards are covered. Common materials for stair construction like timber, stone, concrete, and their properties are discussed. Elevator components like the machine room, hoistway, cabs, and controllers are defined. The main types of elevator systems - traction and hydraulic - are outlined.
Lifts
This document provides information on lifts, escalators, and the differences between the two. It defines a lift as a type of vertical transport equipment that moves people or goods between floors of a building. Basic lift components and terminology are explained. The main types of lifts are described as passenger, goods, vehicle, dumbwaiter, and scissor lifts. Escalators are defined as moving staircases that transport people between floors. Escalator components and operating mechanisms are outlined. Applications of lifts and escalators in buildings are listed. The key differences between lifts and escalators are vertical versus horizontal movement, enclosed spaces versus open steps, and relative speeds.
Elevators and escalators
This document provides information about special types of elevators. It begins with a basic introduction to elevators and their functions. It then discusses the history of elevator development. Key developments included early screw drive systems, safety brakes to prevent falls, and the introduction of electric power. The document outlines various elevator designs and components. These include the cab, doors, hoist mechanisms, and control systems. It also discusses different types of elevators for passengers, goods, automobiles, and more. Standards and regulations for elevator design are also reviewed.
Lifts
Lifts, also known as elevators, are appliances that transport people or materials vertically between floors of a building. There are two main types of lifts based on power supply: hydraulic lifts, which use hydraulic fluid pressure, and traction lifts (also called machine lifts), which use electric motors and ropes to raise and lower the elevator car. Lifts can also be classified based on their intended use as passenger lifts for transporting people, goods lifts for heavy items, vehicle lifts for cars, scissor lifts for construction work, and dumbwaiters for transporting small loads between floors. Proper maintenance including lubrication, cleaning, and safety inspections is important to ensure safe operation of lifts over time.
Lifts & Escalators
The document discusses lifts and escalators, including their history, components, types, and maintenance requirements. It notes that lifts have been used since the 3rd century BC and the first passenger elevator was built in 1743. Modern lifts are controlled automatically using computers and microchips. Escalators were introduced in 1900 and are used to transport large numbers of people vertically between floors. Proper maintenance of lifts and compliance with acts like the Bombay Lift Acts are important for safety.
LIFT/ELEVATOR
The document provides information on different types of lifts/elevators. It begins with an introduction to lifts, describing their basic function of transporting people or goods between floors. It then discusses the history and development of lifts. The bulk of the document categorizes lifts according to their hoisting mechanism, building height, building type, location, and special uses. It provides examples and descriptions for each category. The document concludes by discussing lift components, electrical components, typical designs, and lift shafts.
Deisgn of Fire Escapes
This presentation deals with the capacity of Fire Escapes, no. of fire escapes required in a building and the different Fire Escape system along with their functionality...
Lifts and escalators
The document defines and discusses elevators and escalators. It provides definitions of lifts/elevators as vertical transport equipment that moves people between floors of buildings efficiently. Escalators are defined as moving stairs that transport people on an inclined track. The document discusses the need for elevators in tall buildings and their various types based on use and function. It also summarizes key components of elevators like the lift car, doors, and design considerations for passenger flow and service quality. Design standards for elevators and escalators are also outlined.
Escalators
Escalators are moving staircases that transport people between floors using a continuous loop of steps. They consist of metal tracks and steps linked together in an endless chain that moves up or down. Escalators are commonly used in places like airports, malls, and transit systems where elevators would be impractical. They are designed based on factors like the distance to be traveled, location, traffic patterns, and safety considerations. Key components include the landing platforms, floor plate, comb plate, steps, handrails, tracks, and the truss that connects the top and bottom platforms. Escalators help move large numbers of people continuously but can also pose safety risks if not properly maintained.
Lift.escalator & moving walk
Lifts, escalators, and moving walks are types of vertical transportation equipment that efficiently move people or goods between floors. Lifts use cables and counterweights to move a car vertically through a shaft. Common types include passenger, goods, and hydraulic lifts. Escalators are moving staircases used to transport people between floors, using steps connected to tracks and handrails. Moving walks are horizontal conveyors used to transport passengers horizontally or at an incline up to 15 degrees. Both escalators and moving walks have handrails and steps or decks that move to allow transportation.
Elevators - Notes
The document discusses different types and classifications of elevators. It defines an elevator and provides classifications according to hoist mechanism (hydraulic, traction, climbing, pneumatic), building height (low-rise, mid-rise, high-rise), building type (hospital, residential, industrial, commercial, parking structures), location (indoor, outdoor), and special uses. It also describes the basic components of elevators including the car, hoistway, machine/drive system, control system, and safety systems. Common types within each classification are defined, such as hydraulic elevators using a piston and traction elevators using ropes and a counterweight.
Dry & Wet Riser Systems
This document provides information on wet and dry riser firefighting systems, including design criteria, requirements, and system components. It discusses factors like building height and area that determine the number and size of rising mains. Key elements of wet riser systems are described such as breeching inlets, landing valves, air release valves, pump configurations, and tank capacities. Requirements for submission to authorities are also covered.
Escalators
a conveyor transport device for carrying people between floors of a building, specially where lifts/ elevators would be impractical
Elevators & Escalators
An escalator consists of a motor-driven chain of individual, linked steps that move up or down on tracks, allowing the steps to remain horizontal. Escalators are used to efficiently move large numbers of people between floors in places where elevators would be impractical, such as in department stores and airports. The main components of an escalator include the landing platforms that house the drive gears and motors, a truss that bridges the platforms, and tracks that guide the endless chain of steps in their continuous loop. Escalators are designed to have a step width of 600mm, 800mm, or 1000mm and a standard transportation speed between 0.5 to 0.65m/s.
Escalators
Escalators are moving staircases that transport people between floors. They were invented in the late 19th century and have since been widely adopted. Escalators come in different configurations like parallel or crisscross and can include multiple escalators. They consist of key components like steps, handrails, tracks, and landing platforms. Escalators are designed within standard dimensions and inclines to efficiently move large volumes of people while prioritizing safety.
Vertical transporation systems in building
The document discusses different types of lifts used in buildings. It describes traction lifts, hydraulic lifts, hospital lifts, high residential lifts, and store lifts. Traction lifts are most commonly used for mid-rise and high-rise buildings due to their higher speeds. Hydraulic lifts are used for low-rise buildings up to 8 stories. Hospital lifts are designed to transport large equipment and have wider doors. Residential lifts require regular maintenance. Store lifts transport heavy goods. Proper lift planning considers passenger volume, capacity, and wait times.
Vertical transportation important
There are four main types of vertical transportation: stairs, lifts, escalators, and ramps. Stairs can be straight, dog-legged, geometric, circular, or involve quarter or full turns. Escalators are powered continuous moving stairways used to transport people between floors in places like malls and airports. Ramps provide a sloped surface for transportation between floors, especially for large numbers of people or vehicles. Elevators use guided cars or platforms to lift people and materials vertically between levels in buildings over four stories tall, and can be traction, hydraulic, roped hydraulic, or holeless hydraulic.
Lifts or Elevators
It contains a detailed description of the type of lifts with its working and mechanisms , its use, and dimension as found in India.
Elevator
The document discusses elevators and their control systems. Elevators use either hydraulic or cable systems to move between floors of buildings. Hydraulic elevators use a hydraulic ram and piston to lift an elevator car, while cable systems use steel ropes connected to a sheave and counterweight. Elevator control systems are real-time, distributed, and embedded to safely move passengers based on button inputs and current floor. Safety systems like brakes and shock absorbers prevent elevator accidents in case of cable or power failures.
Lift Design
This document discusses factors to consider when designing lifts, including population, handling capacity, and quality of service. It provides guidelines for calculating population based on building occupancy type and floor area. Handling capacity is calculated using a formula considering average passengers carried per trip, waiting interval, and total peak population. Quality of service is measured by passenger waiting time, with intervals classified as excellent, good, or fair. Round trip time is also calculated, considering time for passenger entry/exit, door operation, acceleration/deceleration, and travel speeds. Recommended lift speeds are provided for different building types.
Fire Safety and Building Materials
This document discusses fire and life safety requirements for buildings. It covers terminology, provisions for different building types, fire prevention measures, exit requirements, occupant loads, egress components, staircases, fire protection systems, and annexures with additional guidelines and data. The main topics covered are exits, means of egress, fire detection and suppression systems, and requirements specific to different building classifications.
Lift
Specially designed for disabled people.
Wider door width – 900mm minimum.
Button panel at lower level – 800mm from
floor.
1. The document discusses the history and components of lift systems used in buildings. It describes the development of safety elevators in the 1800s and categories of lifts based on their functions.
2. The key components of lift systems are identified as the lift car, shaft, doors, controls, and safety devices. Selection factors for lifts include capacity, speed, type of building, and user requirements.
3. Common types of lifts are electric lifts, which use electric motors and cables, and hydraulic lifts, which use hydraulic fluid pressure. Arrangement and
Building services
A building provides shelter but building services are what make it functional for occupants. Building services include mechanical (HVAC, plumbing), electrical (power, lighting), and operational systems (transportation, automation) that provide a safe, comfortable environment. As architects, it is important to plan and design building services alongside the building structure. Proper allocation of services like HVAC, plumbing, electricity is necessary for floor plans. Building services are key to sustainability and livability of all building types from residential to industrial.
building services -Lift's and escalators
1. The document discusses the history and development of elevators and escalators. It traces elevators back to 236 BC and discusses improvements like Elisha Otis' safety elevator in 1852.
2. It then covers various types of lifts according to function, including trade lifts, hospital lifts, high residential lifts, and others. It discusses characteristics, components, selection factors, and installation considerations for lifts.
3. The document also examines lift design considerations like population, handling capacity, interval, categories according to function, and installation by zone systems for tall buildings.
14. Area of Refuge
An area of refuge is a location in a building designed to hold occupants during a fire or other emergency when evacuation may not be safe or possible. Occupants can wait there until rescued or relieved by firefighters. Required portions of an area of refuge must be accessible from the spaces they serve via an accessible means of egress and have access to a public way without returning to the building. Main features required by NFPA include stair flights and landings between area of refuge and public way having a clear width of at least 48 inches, elevators providing access approved for firefighter service, a two-way communication system, and signage identifying doors and associated areas of refuge.
Elevator system
The document discusses the key components and systems of elevators. It describes the elevator car, doors and door operators, shaft and installation process. It explains the traction mechanism used in most elevators to lower and raise the car via steel ropes connected to an electric motor. Safety systems like electromagnetic brakes and speed monitors are also outlined. Control systems can be automatic using microprocessors or manual, while lighting and references are mentioned at the end.
Transportation Systems In Buildings
Presentation by Dr. Mohd Rodzi Ismail-"Transportation In Building" for MSc Building Technology, University Science Malaysia, Penang.
vertical-transportation (mechanical)
This document discusses vertical transportation and elevator design considerations. It covers elevator classification, types, performance criteria, codes and standards. It describes the components and design considerations for passenger and hydraulic elevators. Key parameters for elevator selection like building population, handling capacity, interval, trip time and sizing equations are defined. An example problem demonstrates how to design an elevator system for a 10-story office building to meet performance requirements. Lobby requirements like proximity and sizing based on peak interval are also covered.
More Related Content
What's hot
Deisgn of Fire Escapes
This presentation deals with the capacity of Fire Escapes, no. of fire escapes required in a building and the different Fire Escape system along with their functionality...
Lifts and escalators
The document defines and discusses elevators and escalators. It provides definitions of lifts/elevators as vertical transport equipment that moves people between floors of buildings efficiently. Escalators are defined as moving stairs that transport people on an inclined track. The document discusses the need for elevators in tall buildings and their various types based on use and function. It also summarizes key components of elevators like the lift car, doors, and design considerations for passenger flow and service quality. Design standards for elevators and escalators are also outlined.
Escalators
Escalators are moving staircases that transport people between floors using a continuous loop of steps. They consist of metal tracks and steps linked together in an endless chain that moves up or down. Escalators are commonly used in places like airports, malls, and transit systems where elevators would be impractical. They are designed based on factors like the distance to be traveled, location, traffic patterns, and safety considerations. Key components include the landing platforms, floor plate, comb plate, steps, handrails, tracks, and the truss that connects the top and bottom platforms. Escalators help move large numbers of people continuously but can also pose safety risks if not properly maintained.
Lift.escalator & moving walk
Lifts, escalators, and moving walks are types of vertical transportation equipment that efficiently move people or goods between floors. Lifts use cables and counterweights to move a car vertically through a shaft. Common types include passenger, goods, and hydraulic lifts. Escalators are moving staircases used to transport people between floors, using steps connected to tracks and handrails. Moving walks are horizontal conveyors used to transport passengers horizontally or at an incline up to 15 degrees. Both escalators and moving walks have handrails and steps or decks that move to allow transportation.
Elevators - Notes
The document discusses different types and classifications of elevators. It defines an elevator and provides classifications according to hoist mechanism (hydraulic, traction, climbing, pneumatic), building height (low-rise, mid-rise, high-rise), building type (hospital, residential, industrial, commercial, parking structures), location (indoor, outdoor), and special uses. It also describes the basic components of elevators including the car, hoistway, machine/drive system, control system, and safety systems. Common types within each classification are defined, such as hydraulic elevators using a piston and traction elevators using ropes and a counterweight.
Dry & Wet Riser Systems
This document provides information on wet and dry riser firefighting systems, including design criteria, requirements, and system components. It discusses factors like building height and area that determine the number and size of rising mains. Key elements of wet riser systems are described such as breeching inlets, landing valves, air release valves, pump configurations, and tank capacities. Requirements for submission to authorities are also covered.
Escalators
a conveyor transport device for carrying people between floors of a building, specially where lifts/ elevators would be impractical
Elevators & Escalators
An escalator consists of a motor-driven chain of individual, linked steps that move up or down on tracks, allowing the steps to remain horizontal. Escalators are used to efficiently move large numbers of people between floors in places where elevators would be impractical, such as in department stores and airports. The main components of an escalator include the landing platforms that house the drive gears and motors, a truss that bridges the platforms, and tracks that guide the endless chain of steps in their continuous loop. Escalators are designed to have a step width of 600mm, 800mm, or 1000mm and a standard transportation speed between 0.5 to 0.65m/s.
Escalators
Escalators are moving staircases that transport people between floors. They were invented in the late 19th century and have since been widely adopted. Escalators come in different configurations like parallel or crisscross and can include multiple escalators. They consist of key components like steps, handrails, tracks, and landing platforms. Escalators are designed within standard dimensions and inclines to efficiently move large volumes of people while prioritizing safety.
Vertical transporation systems in building
The document discusses different types of lifts used in buildings. It describes traction lifts, hydraulic lifts, hospital lifts, high residential lifts, and store lifts. Traction lifts are most commonly used for mid-rise and high-rise buildings due to their higher speeds. Hydraulic lifts are used for low-rise buildings up to 8 stories. Hospital lifts are designed to transport large equipment and have wider doors. Residential lifts require regular maintenance. Store lifts transport heavy goods. Proper lift planning considers passenger volume, capacity, and wait times.
Vertical transportation important
There are four main types of vertical transportation: stairs, lifts, escalators, and ramps. Stairs can be straight, dog-legged, geometric, circular, or involve quarter or full turns. Escalators are powered continuous moving stairways used to transport people between floors in places like malls and airports. Ramps provide a sloped surface for transportation between floors, especially for large numbers of people or vehicles. Elevators use guided cars or platforms to lift people and materials vertically between levels in buildings over four stories tall, and can be traction, hydraulic, roped hydraulic, or holeless hydraulic.
Lifts or Elevators
It contains a detailed description of the type of lifts with its working and mechanisms , its use, and dimension as found in India.
Elevator
The document discusses elevators and their control systems. Elevators use either hydraulic or cable systems to move between floors of buildings. Hydraulic elevators use a hydraulic ram and piston to lift an elevator car, while cable systems use steel ropes connected to a sheave and counterweight. Elevator control systems are real-time, distributed, and embedded to safely move passengers based on button inputs and current floor. Safety systems like brakes and shock absorbers prevent elevator accidents in case of cable or power failures.
Lift Design
This document discusses factors to consider when designing lifts, including population, handling capacity, and quality of service. It provides guidelines for calculating population based on building occupancy type and floor area. Handling capacity is calculated using a formula considering average passengers carried per trip, waiting interval, and total peak population. Quality of service is measured by passenger waiting time, with intervals classified as excellent, good, or fair. Round trip time is also calculated, considering time for passenger entry/exit, door operation, acceleration/deceleration, and travel speeds. Recommended lift speeds are provided for different building types.
Fire Safety and Building Materials
This document discusses fire and life safety requirements for buildings. It covers terminology, provisions for different building types, fire prevention measures, exit requirements, occupant loads, egress components, staircases, fire protection systems, and annexures with additional guidelines and data. The main topics covered are exits, means of egress, fire detection and suppression systems, and requirements specific to different building classifications.
Lift
Specially designed for disabled people.
Wider door width – 900mm minimum.
Button panel at lower level – 800mm from
floor.
1. The document discusses the history and components of lift systems used in buildings. It describes the development of safety elevators in the 1800s and categories of lifts based on their functions.
2. The key components of lift systems are identified as the lift car, shaft, doors, controls, and safety devices. Selection factors for lifts include capacity, speed, type of building, and user requirements.
3. Common types of lifts are electric lifts, which use electric motors and cables, and hydraulic lifts, which use hydraulic fluid pressure. Arrangement and
Building services
A building provides shelter but building services are what make it functional for occupants. Building services include mechanical (HVAC, plumbing), electrical (power, lighting), and operational systems (transportation, automation) that provide a safe, comfortable environment. As architects, it is important to plan and design building services alongside the building structure. Proper allocation of services like HVAC, plumbing, electricity is necessary for floor plans. Building services are key to sustainability and livability of all building types from residential to industrial.
building services -Lift's and escalators
1. The document discusses the history and development of elevators and escalators. It traces elevators back to 236 BC and discusses improvements like Elisha Otis' safety elevator in 1852.
2. It then covers various types of lifts according to function, including trade lifts, hospital lifts, high residential lifts, and others. It discusses characteristics, components, selection factors, and installation considerations for lifts.
3. The document also examines lift design considerations like population, handling capacity, interval, categories according to function, and installation by zone systems for tall buildings.
14. Area of Refuge
An area of refuge is a location in a building designed to hold occupants during a fire or other emergency when evacuation may not be safe or possible. Occupants can wait there until rescued or relieved by firefighters. Required portions of an area of refuge must be accessible from the spaces they serve via an accessible means of egress and have access to a public way without returning to the building. Main features required by NFPA include stair flights and landings between area of refuge and public way having a clear width of at least 48 inches, elevators providing access approved for firefighter service, a two-way communication system, and signage identifying doors and associated areas of refuge.
Elevator system
The document discusses the key components and systems of elevators. It describes the elevator car, doors and door operators, shaft and installation process. It explains the traction mechanism used in most elevators to lower and raise the car via steel ropes connected to an electric motor. Safety systems like electromagnetic brakes and speed monitors are also outlined. Control systems can be automatic using microprocessors or manual, while lighting and references are mentioned at the end.
What's hot (20)
Viewers also liked
Transportation Systems In Buildings
Presentation by Dr. Mohd Rodzi Ismail-"Transportation In Building" for MSc Building Technology, University Science Malaysia, Penang.
vertical-transportation (mechanical)
This document discusses vertical transportation and elevator design considerations. It covers elevator classification, types, performance criteria, codes and standards. It describes the components and design considerations for passenger and hydraulic elevators. Key parameters for elevator selection like building population, handling capacity, interval, trip time and sizing equations are defined. An example problem demonstrates how to design an elevator system for a 10-story office building to meet performance requirements. Lobby requirements like proximity and sizing based on peak interval are also covered.
Elevator Controller
Elevator Controller Diagram eSSL Get one for your organization from AmpleTrails by calling 9315441078
BE
This document contains a list of 4 CAD projects: a hydraulic break, halogen light bulb tester, and elevator rollers. The projects involve designing and modeling mechanical parts and systems using CAD software.
Shredder Assembly.PDF
This document contains design drawings and specifications for a shredder. It includes a bill of materials listing the parts, materials, and quantities. Dimensioned technical drawings show the shredder from multiple views and angles. Key specifications are the gear ratio of 1:173 and that the housing and several internal components are made of ABS plastic, while the shafts and gears are stainless steel.
Elevator controller for multi story building security
The elevator control module consists of an EC10 control panel and optional EX16 expansion boards to control access to up to 26 floors. The system uses RFID or fingerprint authentication to restrict access to authorized users only during certain hours or when valid credentials are presented. It provides fail-safe access and real-time monitoring and updating of user privileges. Suitable for offices, government buildings, airports and factories, it offers partners an additional access control product and opportunities in a new market.
Exploiting Elevator Security Weaknesses by Deviant Ollam
Throughout the history of hacker culture, elevators have played a key role. From the mystique of students at MIT taking late-night rides upon car tops (don't do that, please!), to the work of modern pen testers who use elevators to bypass building security systems (it's easier than you think!), these devices are often misunderstood and their full range of features and abilities go unexplored. This talk will be an in-depth explanation of how elevator control systems work...allowing for greater understanding, system optimizing, and the subversion of security in many facilities. Those who attend will learn why an elevator is virtually no different than an unlocked staircase as far as building security is concerned!
New Indian Elevators, Maharashtra, Elevator Components
As a legally certified proprietorship firm, we are producing elevator accessories and metal elevator accessories that includes gear boxes, magnetic brakes, governer and safety devices, car operating panels, push button boxes, landing door locks and many others. In addition, we also undertake turnkey projects for supplying, erection, installation and commissioning of elevators. Apart from this, we also undertake job works for maintenance and repair of lift.
Breaking Vaults - Stealing Lastpass Protected Secrets by Martin Vigo
LastPass is a popular password manager that integrates with browsers through plugins. One of the most interesting features is the fact that the encrypted vault is stored in LastPass' servers but they have no access to the content since the master password never leaves the user's machine. All encryption and decryption happens locally. Password managers are a single point of failure by design and therefore they need to be secure. A tool with the sole purpose of storing all your secrets is a important target for any attacker.
The most valuable piece of information is the master password. It is the key to decrypt the data and gain complete access. Research has been done on different attack vectors but the focus is on leaking passwords stored in the vault. This presentation will focus on how it is possible to steal and decrypt the master password. In addition, I will also demonstrate an additional attack vector that results in full access to the vault without the need of the master password. Two different attacks to achieve the same goal, full access to the vault. But given that LastPass supports 2 factor authentication, I will also demonstrate how to bypass it. Last but not least, I will release a Metasploit module that will automate the whole process. Stealing the master password, leaking the encryption key and bypassing 2 factor authentication.
An Introduction to Machine Learning
The IT discipline of machine learning has become increasingly important in recent years. It promises to solve types of problems for which normal software development is considered unsuitable or too costly.
Omkar Electronics, Thane, Elevator Components
Manufacturers & Exporters of various Elevator Parts, Elevator Panels and Electrical Spare Parts, NGLC Single speed G 4, V3F Manual Door Controller.
Elevator
The students conducted experiments in an elevator to test if a person's or object's weight changes when experiencing weightlessness while still being affected by gravity. They weighed items before, during, and after elevator trips up and down. Their results showed that weight increases when the elevator accelerates up, stays the same when moving up at a constant speed, and decreases when slowing up or moving down. This is because the elevator applies more force pushing up during acceleration and less force when slowing or moving down.
161115 FDTB - from pile group to piled raft_Benoit Latapie
This document discusses foundation design for tall buildings, focusing on combined pile raft foundations (CPRF). It provides an introduction to CPRF, explaining that they combine the bearing resistance of rafts and piles to share building loads. The piles act as settlement reducers while the raft provides additional load capacity and stiffness governs the design. The document then presents a case study of a confidential project that analyzed settlements using different modeling methods. It also reviews existing tall buildings in Dubai founded on CPRF and their predicted settlements. Finally, it discusses considerations for preliminary pile load testing and the benefits of using the BS8004:2015 foundation design code of practice.
Developing an Elevator Pitch
An elevator pitch is a brief summary used to introduce an idea, product, or business to potential investors. The document provides guidance on creating an effective elevator pitch, including keeping it under 30 seconds, focusing on the problem being solved and key benefits, and leaving the listener wanting to learn more. Common mistakes to avoid are going over time, using jargon, and providing irrelevant details.
shredder design
This document describes three types of low-speed shredders. Type I shredders have stationary knives and two counter-rotating shafts for shredding scrap wire and cable. Type II shredders, the most common design, have two intermeshing counter-rotating shafts for shredding a variety of materials. Type III shredders are designed for shredding tires, with intermeshing shafts, replaceable cutting edges, and star-shaped feed rolls to push tires into the cutting zone. The different designs illustrate how low-speed shredders can be adapted to specific waste streams and processing needs.
Thysse krupp introducing tke_nov_2014_16-9_final
ThyssenKrupp Elevator (UK) Limited is one of the largest lift and escalator companies in the UK with specific expertise in lift installation, modernisation, repair and maintenance. Our decentralised structure enables us to deliver a Service / Maintenance programme from initial site surveys through to Contract fulfilment using locally based Project Management (where required) and Service Engineering teams. Our local teams are fully supported by our UK engineering and technical support function, i.e. Technicians and our I T S Department in the UK and European manufacturing facilities in Germany and France.
david.heaney@thyssenkrupp.com
Elevator1
This project is designed for an eight floor elevator controller. of an integrated circuit that can be used as part of elevator controller
Bucket Elevator Basics: Definitions & Details
This document provides information on bucket elevators, including definitions, details on chain selection and types of bucket elevators. It discusses the main types of bucket elevators - centrifugal discharge, continuous, super capacity and positive discharge - and details their typical chain speeds, styles and attachments. Chain types include hardened steel bushed, steel bushed roller and styles of attachments like K, A, G and floating.
Viewers also liked (18)
Elevator controller for multi story building security
Elevator controller for multi story building security
Exploiting Elevator Security Weaknesses by Deviant Ollam
Exploiting Elevator Security Weaknesses by Deviant Ollam
New Indian Elevators, Maharashtra, Elevator Components
New Indian Elevators, Maharashtra, Elevator Components
Breaking Vaults - Stealing Lastpass Protected Secrets by Martin Vigo
Breaking Vaults - Stealing Lastpass Protected Secrets by Martin Vigo
161115 FDTB - from pile group to piled raft_Benoit Latapie
161115 FDTB - from pile group to piled raft_Benoit Latapie
More from beccapr69
How Elevators Work
Elevators use a system of cables, pulleys, and counterweights to lift passengers between floors of a building. An electric motor powers the system, pulling the elevator cab up or lowering the counterweight, while sensors ensure the cab stops level with each floor. Modern elevators can carry heavy loads efficiently using these mechanical and electrical systems.
How Elevators Work
Elevators use a system of cables, pulleys, and counterweights to lift passengers between floors of a building. The elevator car is suspended from steel cables that wind around traction sheaves in the machine room above. As the cables wind and unwind, the counterweights move in the opposite direction of the car to balance the load and allow smooth lifting and lowering of passengers.
How Elevators Work
Elevators use a system of cables, pulleys, and counterweights to lift passengers between floors of a building. An electric motor powers the system, pulling the elevator cab up or lowering the counterweight, while sensors ensure the cab stops level with each floor. Modern elevators can carry heavy loads efficiently using these mechanical and electrical systems.
Pruneda curriculum vitae updated 5 15 12
This curriculum vita summarizes Rebecca Pruneda's educational and professional background. It includes her academic degrees and certifications, graduate internships, employment history in special education teaching roles, leadership experience, professional development training, and references. The vita provides a comprehensive overview of her qualifications and experience in the education field.
PISE/ ETLISE
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Course embedded et[1]05 13 12
This report summarizes course-embedded internship activities completed by the student, totaling 150 hours. It includes 5 activities ranging from 5 to 15 hours each, related to standards for technology facilitation and leadership. For each activity, the report lists the course, date completed, time spent, activity description, and a 150-word reflection on what was learned. Overall, the summaries indicate the student engaged in self-assessments, research plan drafting, revising based on feedback, developing a leadership vision, and observing an SBDM meeting to explore leadership and technology integration in educational settings.
Validated summary report 05 12 12
This document contains reflections from activities related to developing technology skills and assisting other teachers in developing their skills. It discusses helping teachers learn new programs, providing strategies for student-centered learning, assisting teachers in addressing student diversity, and sharing resources on copyright and district tools. The reflections show the value of mentoring other teachers, engaging in ongoing learning, and applying skills to help administration and improve equitable access to technology.
Action research working copy
The document discusses implementing a technology education program in primary grades at Fairmeadows Elementary School. It describes conducting a needs assessment that found the existing laptop reservation system was inequitable and primary grade teachers were not using the mobile laptop labs. A new reservation system and a committee were formed to create a technology training program for primary teachers. The program trained teachers to use laptops with small reading groups to address teachers' concerns about classroom control. The goals were to provide students more access to technology and for teachers to gain skills in using technology in a workable way with young children.
Etl intern superv_eval_su2_11_sig.doc completed
This document is a supervisor evaluation form for an educational technology leadership internship. It consists of 8 standards and performance indicators to evaluate the intern's skills and abilities in areas such as technology operations, planning learning environments, teaching and assessment, productivity, and leadership. The supervisor rates the intern's performance as exemplary, proficient, minimally proficient, or unacceptable in each criterion and provides comments to justify their ratings.
Pruneda curriculum vitae updated 5 2 12
Rebecca Pruneda is a special education teacher seeking a principal position. She has a Masters in Educational Technology Leadership from Lamar University and over 15 years of experience as a special education teacher in Dallas and Duncanville, Texas. Her resume outlines her educational background, certifications, employment history, leadership experience, and professional development. She provides references from her current and past principals and supervisors.
Podcast rubric for the water cycle
This rubric evaluates podcasts on the water cycle based on several categories: introduction, content, delivery, interviews, music/graphics, technical production, and group work. An exemplary podcast would have a catchy introduction engaging the audience about the water cycle. It would provide accurate, succinct information from a variety of expert sources. The delivery would be rehearsed with clear enunciation. It could include interesting interviews and music/graphics that enhance the presentation without being distracting. The technical production would have smooth transitions and consistent volume. An exemplary group project would have equal contribution from all members to the finished product.
Dc basics
The document discusses issues around raising children in a digital age, including cell phone use in schools, technology addiction, digital citizenship, and skills needed for students. It suggests educators need to consider core issues, teaching responsibilities, and building curriculum to teach important skills as technology advances.
Pruneda curriculum vitae updated 9 25 11
Rebecca Pruneda has over 15 years of experience as a special education teacher in Texas. She has a Master's degree in Educational Technology Leadership and certifications in special education and general education. Her professional experience includes teaching various special education subjects at multiple grade levels and serving in leadership roles such as department chair and special education liaison.
Week 2 assignment staff development agenda and reflections
The document provides guidance for a preliminary staff development agenda on designing engaging lessons for colleagues. The agenda must demonstrate understanding of learner-centered principles, create a positive environment, focus on an identified objective, include active participation, facilitate consensus-building on teaching approaches, and conduct an evaluation. The agenda includes an introduction to refresh knowledge on learner-centered principles, an activity to create a teaching tool using recyclables, an activity to identify engaging activities for different learners, and a conclusion to refine lessons based on the activities.
Revised new plan
This action research plan aims to create an equitable schedule for mobile laptop labs that promotes their usage across grade levels. The plan involves surveying teachers to understand barriers to lab use, researching best practices, interviewing select teachers, creating mini-lessons based on needs, and establishing a wiki for resources. Ongoing data collection through surveys, the schedule, and wiki comments will evaluate progress in increasing younger grades' usage and balancing usage across staff.
New plan
This document outlines an action research plan with the goal of creating an equitable schedule for mobile laptop labs that promotes their usage across grade levels. The plan involves surveying teachers to understand barriers to lab use, researching best practices, interviewing select teachers, creating mini-lessons to address needs, and using a wiki to document progress. Data will be collected through ongoing surveys, the interactive schedule, and wiki comments to evaluate the effectiveness of interventions in increasing equitable access to the mobile labs.
More from beccapr69 (20)
Technology leadership internship supervisor evaluation
Technology leadership internship supervisor evaluation
Week 2 assignment staff development agenda and reflections
Week 2 assignment staff development agenda and reflections
Recently uploaded
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdExecutive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Recently uploaded (20)
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Diagram of an elevator
- 1. Elevator Diagram: A Typical Overhead Traction Elevator Controller Selector Elevator Machine Overspeed governor Hoist ropes Selector driving tape Roller Guide Final limit switch Door operator Cab Safety edge Car guiding rails Car safety gear Travelling cables Counterweight Counterweight guide-rails Safety limit switch Car buffer Final limit switch Governor tension pulley