This document describes the design of an injection mold for producing a ceiling fan regulator knob. It discusses modeling the knob component geometry in Solidworks. An 8-cavity injection mold tool is designed to produce the knob. Key steps included core and cavity extraction, mold base modeling, and assembly of the core and cavity inserts into the mold base. Molding parameters like number of cavities, injection temperature and time were calculated. The complete injection mold tool assembly is designed and modeled to manufacture the ceiling fan regulator knob.
Design and Analysis of Ceiling Cable Holder Baseijtsrd
Injection moulds are classified into two types based on runner design i.e. Cold runner moulds and Runner less moulds i.e. hot runner moulds. In cold runner moulds, for multi cavity and multi point injection moulds, there is wreckage of material in runner area. Also wastage of material is more than component weight. To overcome the above problem, the technique used is hot Runner moulds. Hot runner mould is one of the improved manufacturing techniques for multi cavity type moulds. These types of moulds are commonly used for large production rate. While producing plastic components using normal standard multi cavity mould, we are facing the problems like partial filling, cavities in components, less product quality, injection pressure and temperature reduction and war page etc. Thus we are redesigning the holder base by doing some modification in and this will be beneficial for our using purpose. We are making design of the component, mould flow analysis using software Solid works. Nitish Kumar Mishra | Prof. Vaibhav Bankar ""Design and Analysis of Ceiling Cable Holder Base"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23840.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23840/design-and-analysis-of-ceiling-cable-holder-base/nitish-kumar-mishra
The Surface roughness prediction method using
artificial neural network (ANN) and Adaptive Neuro Fuzzy
Inference System (ANFIS) are developed to investigate the
effects of cutting conditions during turning of EN8 material.
The ANN model of surface roughness parameters (Ra) is
developed with the cutting conditions such as cutting speed,
feed rate and depth of cut as the affecting process
parameters.
The experiments are planned and totally 27 settings
with three levels defined for each of the factors in order to
develop the knowledge based system. The ANN training
method is used for back-propagation training algorithm
(BPTA) and also for training the Adaptive neuro fuzzy
inference system (ANFIS). We have compared the
Artificial Neural Network and Adaptive neuro fuzzy
inference systems.
The main objective of this paper is to
determine casting defects generally happening in an
aluminium die casting process and efforts have been
taken to identify the tools which eliminate the casting
defects. In global prospective this study briefs the
application of the various tools that are used in the
industries for improvement of quality in foundry
industry. In our national prospective these tools are not
so popular, hence this study will help us to utilise the
available technology through which the productivity is
enhanced with safe and economical means. The QC
tools were used to analyse the casting condition of the
given pattern with three dimensional simulations for the
result preparation. This work has been carried out to
improve the quality of the pattern which is made with
gravity die casting process and this was achieved
through continuous quality control operation with QC
tools, then it was taken to test in some simulation
software. The latest trend available in casting and
foundry shops are the scientific approach in
optimization of all kind of fields including optimization
of defects in castings. These trends are incorporated in
the analysis of aluminium die casting.
Analysis Of The Structure Of A Material Used In The Manufacture Of Thermal Ch...IJERA Editor
The dynamic stability of machine has its own importance in the quality of the machined product. With the development of new technologies for cutting tools, as the geometries and materials, cutting speeds used today reach values inconceivable for two decades. In the automotive industry steel and cast iron are gradually being replaced by lower density material and even lower costs. In complex shapes tools, heterogeneous material removal in roughing, sudden changes of sections, etc. Stress relieving treatment should be carried out to minimize dimensional variations of form during quenching and tempering. Materials for manufacture of thermal fixing most appropriate for that operating system still needs to be further investigated. Therefore, this study investigated the elastic behavior of the material used in the manufacture of tooling systems for cutting tools. Has been evaluated In fastening system, the temperature variation exerted on the mandrel body region and the thermal expansion where H13 steel can withstand the assembly process by thermal interference. This method can determine the amount of number of cycles until the onset of fatigue that material.
Optimization of cutting parameters on mild steel with hss & cemented carbide ...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Analysis and design of mold for plastic side release buckle using moldflow so...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Design and Analysis of Ceiling Cable Holder Baseijtsrd
Injection moulds are classified into two types based on runner design i.e. Cold runner moulds and Runner less moulds i.e. hot runner moulds. In cold runner moulds, for multi cavity and multi point injection moulds, there is wreckage of material in runner area. Also wastage of material is more than component weight. To overcome the above problem, the technique used is hot Runner moulds. Hot runner mould is one of the improved manufacturing techniques for multi cavity type moulds. These types of moulds are commonly used for large production rate. While producing plastic components using normal standard multi cavity mould, we are facing the problems like partial filling, cavities in components, less product quality, injection pressure and temperature reduction and war page etc. Thus we are redesigning the holder base by doing some modification in and this will be beneficial for our using purpose. We are making design of the component, mould flow analysis using software Solid works. Nitish Kumar Mishra | Prof. Vaibhav Bankar ""Design and Analysis of Ceiling Cable Holder Base"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23840.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23840/design-and-analysis-of-ceiling-cable-holder-base/nitish-kumar-mishra
The Surface roughness prediction method using
artificial neural network (ANN) and Adaptive Neuro Fuzzy
Inference System (ANFIS) are developed to investigate the
effects of cutting conditions during turning of EN8 material.
The ANN model of surface roughness parameters (Ra) is
developed with the cutting conditions such as cutting speed,
feed rate and depth of cut as the affecting process
parameters.
The experiments are planned and totally 27 settings
with three levels defined for each of the factors in order to
develop the knowledge based system. The ANN training
method is used for back-propagation training algorithm
(BPTA) and also for training the Adaptive neuro fuzzy
inference system (ANFIS). We have compared the
Artificial Neural Network and Adaptive neuro fuzzy
inference systems.
The main objective of this paper is to
determine casting defects generally happening in an
aluminium die casting process and efforts have been
taken to identify the tools which eliminate the casting
defects. In global prospective this study briefs the
application of the various tools that are used in the
industries for improvement of quality in foundry
industry. In our national prospective these tools are not
so popular, hence this study will help us to utilise the
available technology through which the productivity is
enhanced with safe and economical means. The QC
tools were used to analyse the casting condition of the
given pattern with three dimensional simulations for the
result preparation. This work has been carried out to
improve the quality of the pattern which is made with
gravity die casting process and this was achieved
through continuous quality control operation with QC
tools, then it was taken to test in some simulation
software. The latest trend available in casting and
foundry shops are the scientific approach in
optimization of all kind of fields including optimization
of defects in castings. These trends are incorporated in
the analysis of aluminium die casting.
Analysis Of The Structure Of A Material Used In The Manufacture Of Thermal Ch...IJERA Editor
The dynamic stability of machine has its own importance in the quality of the machined product. With the development of new technologies for cutting tools, as the geometries and materials, cutting speeds used today reach values inconceivable for two decades. In the automotive industry steel and cast iron are gradually being replaced by lower density material and even lower costs. In complex shapes tools, heterogeneous material removal in roughing, sudden changes of sections, etc. Stress relieving treatment should be carried out to minimize dimensional variations of form during quenching and tempering. Materials for manufacture of thermal fixing most appropriate for that operating system still needs to be further investigated. Therefore, this study investigated the elastic behavior of the material used in the manufacture of tooling systems for cutting tools. Has been evaluated In fastening system, the temperature variation exerted on the mandrel body region and the thermal expansion where H13 steel can withstand the assembly process by thermal interference. This method can determine the amount of number of cycles until the onset of fatigue that material.
Optimization of cutting parameters on mild steel with hss & cemented carbide ...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Analysis and design of mold for plastic side release buckle using moldflow so...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Conceptual design of injection mould tool for main body part of an air inflatoreSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Design of ‘plastic injection mold’ for an ‘air vent bezel’ through flow analy...eSAT Journals
Abstract Designer's of plastic injection Molds need to study from this point of view, the type of Mold to be designed, the physical Mold orientation, the dimensions for each of the element in the Mold, the location of the gate, runner, requirement of insert, draft angle requirement, shrinkage factor, location of cooling channels. Design can also be simplified by using standardized parts of the mold such as ejector pins. By eliminating the obstruction to smooth flow of plastic a good of quality component can be achieved. The effort of this thesis work is to find out the nuances in the Plastic Injection Mold Design while borrowing the inputs from the Flow Analysis (CAE) conducted for the 'Air vent bezel' to study the behavior of the Melt during flow. The Mold Design would incorporate suitable checking to ensure the best quality product in terms of `defect-free’ output. This thesis work consist methodology of plastic injection molding process, material requirement, how to overcome weld mark, shrinkage etc to satisfactorily assemble the component. Keywords: Draft angle, Shrinkage, CAE, weld mark
The present research work demonstrates the
preparation of Copper Oxide Nanoparticles (CuO NPs) and
investigates the thermo mechanical properties of the CuO NPs
embedded in the polymer composites experimentally. In this study,
CuO NPs were produced by aqueous precipitation method and
morphology of the NPs was studied using Field Emission
Transmission Electron Microscope (FESEM). Epoxy resin and glass microsphere were considered the base material for the preparation of
the Nano based polymer composites. In order to fabricate the Nano
based polymer composites, CuO NPs with 1.0wtpercentage were
embedded in the base material by means of compression moulding
press. Nano composites proved higher thermal conductivity
enhancement rather than the base material. While comparing to the
base material, the maximum four-point bending strength of 415 MPa
was obtained from the Nano based polymer composites. The test
results obtained from the TG study revealed that an addition of CuO
NPs had acted as the thermal retardant and CuO NPs had delayed
thermal degradation of the Nano based polymer composites. Based
on the test results, it can be suggested that the newly fabricated
nanocomposites have achieved the improved thermal and mechanical
properties.
Finite element simulation of hybrid welding process for welding 304 austeniti...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
A Design and Analysis of Two Plate Injection Mould Tool For Wi-Fi RouterTherm...EditorJST
This A Wi-Fi router is a device that performs the function of a wireless access point, it is used to provide
access to the internet or a private computer. It is the hardware device that provide basic infrastructure for a home
or small office network.Proposed to make a single impression semi-automatic family mould to design top and
bottom cover for Wi-Fi router to make it more aesthetic, to reduce material cost, better heat dissipation, and to
reduce the tooling cost, to make the product more competitive in the market.It is proposed select the suitable plastic
material, to modify the existing plastic product design and to develop a suitable two plate family mould of one
impression each using SIEMENS NX software. It is also proposed to make detailing of mould parts and its assembly
for manufacturing using SIEMENS NX software. The analysis was done in AUTODESK MOLDFLOW. The mould
cost, raw material cost and processing cost per component are to be estimated to find the cost per component and to
compare it with the existing component part.
Problems of Heat, Mass and Momentum Transfer in Manufacturing Processes: A Br...drboon
In machining processes the chip flows over the tool rake and carries heat away as it moves. This is a case of mass transportation with heat transfer. Similarly, during hot forging, upsetting or coining processes heat is transferred from the hot billet to the relatively cooler dies, punches or hammers with momentum transfer under high impact load. Also, in high energy rate fabrication (HERF) processes, such as electromagnetic forming, explosive forming, impact extrusion, etc. heat is generated almost instantaneously, in milliseconds, and its dissipation is a serious industrial problem due to the very short process cycle time. In the present paper some of the problems related to heat, mass and momentum transfer in the above mentioned manufacturing processes are reviewed and compared with experimental results.
DESIGN AND FABRICATION OF WELDING FIXTURES AND POSITIONERSvivatechijri
In recent times, manufacturing industries have shown more interest towards Automation. In other
words, the industries today emerge with evolving technology. It is obvious that Industrial Automation streamlines
the operations in terms of speed, reliability and product output. In this thesis, welding fixture for two wheeler
steering handle is modeled using CATIA software, forces are calculated, and an analysis has been carried out in
the precisions placing of one circular component over another circular component during the welding process.
Welding circular rod over another circular rod, the possibility of maintaining the accuracy in placing of curved
surfaces is very less in the mass production. Here the difficulty is overcome by the new design of the fixture, and
the angle as well as the linear movements is maintained in the accuracy of 0.1 mm without any robots. In the field
of welding engineering where a consistently good quality, low cost with a maximum productivity is a must, this
accuracy canbe done by without automation. Welding fixtures are available in different size, shapes, materials
and mechanisms based on their need of operations. The precision of the fixture play a major role in the
manufacturing component. Batch production is the commonly used method in various small and large industries.
Welding a curved surface over an another curved surface is very challenging so is positioning the components.
In mass production, positioning a job takes significant amount of time due to manual process. To overcome this
challenge, theoretical approach has been carried out on the fixture like design fabrication and analysis.
A practical approach to eliminate defects in gravity die cast al alloy castin...eSAT Journals
Abstract
This paper deals with elimination of defects in aluminium alloy castings produced by gravity die casting process. The main intention of work is to investigate the defects and improve quality of a gravity die cast component using Computer Aided Casting Simulation Software. In this study an industrial gravity casting die is used which was producing defective components. The die and components produced by the die are studied to eliminate the defects using virtual simulations. The defects in the components are identified to be solidification shrinkage, cracks, unfilled riser and incomplete mould cavity. The reasons for the defects are analyzed as either improper selection of process parameters, or improper design of gating and risering system. SOLIDCast simulation software is used for simulating the solidification process of casting and visualizing outputs showing possible problematic areas or defects which may occur in the cast product. The work is carried out in two stages. In first stage, few test castings are produced by modifying the process parameters (pouring temperature, pouring time, pre heat and alloy type) and results are compared with simulation results produced using same parameters. The pouring and simulation results are observed to be in good accordance with each other. In second stage, number of virtual iterations of casting is performed by changing riser dimensions. It was found from the simulation results that riser with 35mm diameter is required to produce casting with zero defects. The die is modified accordingly with the simulation results and metal is poured. The castings produced are observed to be sound and contain no defects; and also it is verified that solidification simulation helps in locating the defects, eliminating them and ultimately improving the quality of castings without any shop-floor trails.
Keywords: Aluminum-Alloys, Casting Defects, Gravity Die Casting, Material Density and SOLIDCast Simulation
Parametric analysis and multi objective optimization of cutting parameters in...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Parametric analysis and multi objective optimization of cutting parameters in...eSAT Journals
Abstract Modern manufacturers, seeking to remain competitive in the market, rely on their Manufacturing engineers and production personnel to quickly and effectively set up manufacturing processes for new products. This paper presents the multi response optimization of turning parameters for Turning on AISI 4340 Alloy Steel. Experiments are designed and conducted based on Taguchi’s L27 Orthogonal array design. This paper discusses an investigation into the use of Taguchi parameter Design and Regression analysis to predict and optimize the Surface Roughness, Metal Removal Rate and Power Consumption in turning operations using CVD Cutting Tool. The Analysis of Variance (ANOVA) is employed to analyze the influence of Process Parameters during Turning. This paper also remarks the advantages of multi-objective optimization approach over the single-objective one. The useful results have been obtained by this research for other similar type of studies and can be helpful for further research works on the Tool life and Vibration of tools etc. Keywords: Turning, Ra, MRR, PC, Taguchi, Anova etc…
Friction Stir Welding of Similar Metals by Taguchi Optimization Technique -A ...IJAEMSJORNAL
In order to meet the global competition and the survival of products in the market a new way of thinking is necessary to change and improve the existing technology and to develop products at economical price.This paper discusses use taguchi experiment design technique for maximizing tensile strength of friction stir welding AA6061 and AA6061. In friction stir welding, the joints are formed in the solid state by utilizing the heat generated by friction. The objectives of this study are obtaining friction weld element of aluminium 6061 to aluminium 6061 and optimising the friction stir welding parameters in order to establish the weld quality. Effect of tensile strength of friction stir welding process parameter (Rotational speed, travel speed, axial force and tilt angle) is evaluated and optimum welding condition for maximum tensile strength is determined.
Design and Analysis of Pressure Die Casting for Door Handleijtsrd
Die casting is a metal casting operation that is specified by forcing molten metal under elevated pressure into a mould cavity. The mould cavity is build using two hardened tool steel dies which have been machined into shape and work closely to an injection mould during the process. While casting, a hot or cold chamber machine is used as requirement. While the using of round shaped aluminum door handles it detect that while opening the door whole load is concentrated on two screws which develop in tearing the area where handle is fastened, came in observation that if fastened screw get teared it looks odd . I have redesigned the Door handle maintaining its aesthetic appearance and design to overcome the said identified problem. Lokesh Narayan Dhak | Vaibhav Bankar "Design and Analysis of Pressure Die Casting for Door Handle" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46283.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/46283/design-and-analysis-of-pressure-die-casting-for-door-handle/lokesh-narayan-dhak
DESIGN AND ANALYSIS OF NEW COUPLING SYSTEM IN INJECTION MOLDING MACHINE TO IM...ijiert bestjournal
Injection molding machine is the most commonly used manufacturing process for the fabrication of plastic parts. The plastic being mel ted in injection molding machine and then injected into the mould. The barrel contains recipr ocating screw for injecting the material into the mould and the material is also melted into the barrel. This project deals with,the solution of problem occurred for reciprocating screw of Inje ction molding machine. It identifies and solves the problem by using the modeling and analys is techniques. The problem occurred in the reciprocating screw of machine which is wearing of threads due to affect of temperature of mold materials (flow ma terials) i.e. Nylon,low density polypropylene,polystyrene,PVC etc.,The main work was to model the components of machine with dimensions,and perform thermal analys is with modeled component.
Conceptual design of injection mould tool for main body part of an air inflatoreSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Design of ‘plastic injection mold’ for an ‘air vent bezel’ through flow analy...eSAT Journals
Abstract Designer's of plastic injection Molds need to study from this point of view, the type of Mold to be designed, the physical Mold orientation, the dimensions for each of the element in the Mold, the location of the gate, runner, requirement of insert, draft angle requirement, shrinkage factor, location of cooling channels. Design can also be simplified by using standardized parts of the mold such as ejector pins. By eliminating the obstruction to smooth flow of plastic a good of quality component can be achieved. The effort of this thesis work is to find out the nuances in the Plastic Injection Mold Design while borrowing the inputs from the Flow Analysis (CAE) conducted for the 'Air vent bezel' to study the behavior of the Melt during flow. The Mold Design would incorporate suitable checking to ensure the best quality product in terms of `defect-free’ output. This thesis work consist methodology of plastic injection molding process, material requirement, how to overcome weld mark, shrinkage etc to satisfactorily assemble the component. Keywords: Draft angle, Shrinkage, CAE, weld mark
The present research work demonstrates the
preparation of Copper Oxide Nanoparticles (CuO NPs) and
investigates the thermo mechanical properties of the CuO NPs
embedded in the polymer composites experimentally. In this study,
CuO NPs were produced by aqueous precipitation method and
morphology of the NPs was studied using Field Emission
Transmission Electron Microscope (FESEM). Epoxy resin and glass microsphere were considered the base material for the preparation of
the Nano based polymer composites. In order to fabricate the Nano
based polymer composites, CuO NPs with 1.0wtpercentage were
embedded in the base material by means of compression moulding
press. Nano composites proved higher thermal conductivity
enhancement rather than the base material. While comparing to the
base material, the maximum four-point bending strength of 415 MPa
was obtained from the Nano based polymer composites. The test
results obtained from the TG study revealed that an addition of CuO
NPs had acted as the thermal retardant and CuO NPs had delayed
thermal degradation of the Nano based polymer composites. Based
on the test results, it can be suggested that the newly fabricated
nanocomposites have achieved the improved thermal and mechanical
properties.
Finite element simulation of hybrid welding process for welding 304 austeniti...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
A Design and Analysis of Two Plate Injection Mould Tool For Wi-Fi RouterTherm...EditorJST
This A Wi-Fi router is a device that performs the function of a wireless access point, it is used to provide
access to the internet or a private computer. It is the hardware device that provide basic infrastructure for a home
or small office network.Proposed to make a single impression semi-automatic family mould to design top and
bottom cover for Wi-Fi router to make it more aesthetic, to reduce material cost, better heat dissipation, and to
reduce the tooling cost, to make the product more competitive in the market.It is proposed select the suitable plastic
material, to modify the existing plastic product design and to develop a suitable two plate family mould of one
impression each using SIEMENS NX software. It is also proposed to make detailing of mould parts and its assembly
for manufacturing using SIEMENS NX software. The analysis was done in AUTODESK MOLDFLOW. The mould
cost, raw material cost and processing cost per component are to be estimated to find the cost per component and to
compare it with the existing component part.
Problems of Heat, Mass and Momentum Transfer in Manufacturing Processes: A Br...drboon
In machining processes the chip flows over the tool rake and carries heat away as it moves. This is a case of mass transportation with heat transfer. Similarly, during hot forging, upsetting or coining processes heat is transferred from the hot billet to the relatively cooler dies, punches or hammers with momentum transfer under high impact load. Also, in high energy rate fabrication (HERF) processes, such as electromagnetic forming, explosive forming, impact extrusion, etc. heat is generated almost instantaneously, in milliseconds, and its dissipation is a serious industrial problem due to the very short process cycle time. In the present paper some of the problems related to heat, mass and momentum transfer in the above mentioned manufacturing processes are reviewed and compared with experimental results.
DESIGN AND FABRICATION OF WELDING FIXTURES AND POSITIONERSvivatechijri
In recent times, manufacturing industries have shown more interest towards Automation. In other
words, the industries today emerge with evolving technology. It is obvious that Industrial Automation streamlines
the operations in terms of speed, reliability and product output. In this thesis, welding fixture for two wheeler
steering handle is modeled using CATIA software, forces are calculated, and an analysis has been carried out in
the precisions placing of one circular component over another circular component during the welding process.
Welding circular rod over another circular rod, the possibility of maintaining the accuracy in placing of curved
surfaces is very less in the mass production. Here the difficulty is overcome by the new design of the fixture, and
the angle as well as the linear movements is maintained in the accuracy of 0.1 mm without any robots. In the field
of welding engineering where a consistently good quality, low cost with a maximum productivity is a must, this
accuracy canbe done by without automation. Welding fixtures are available in different size, shapes, materials
and mechanisms based on their need of operations. The precision of the fixture play a major role in the
manufacturing component. Batch production is the commonly used method in various small and large industries.
Welding a curved surface over an another curved surface is very challenging so is positioning the components.
In mass production, positioning a job takes significant amount of time due to manual process. To overcome this
challenge, theoretical approach has been carried out on the fixture like design fabrication and analysis.
A practical approach to eliminate defects in gravity die cast al alloy castin...eSAT Journals
Abstract
This paper deals with elimination of defects in aluminium alloy castings produced by gravity die casting process. The main intention of work is to investigate the defects and improve quality of a gravity die cast component using Computer Aided Casting Simulation Software. In this study an industrial gravity casting die is used which was producing defective components. The die and components produced by the die are studied to eliminate the defects using virtual simulations. The defects in the components are identified to be solidification shrinkage, cracks, unfilled riser and incomplete mould cavity. The reasons for the defects are analyzed as either improper selection of process parameters, or improper design of gating and risering system. SOLIDCast simulation software is used for simulating the solidification process of casting and visualizing outputs showing possible problematic areas or defects which may occur in the cast product. The work is carried out in two stages. In first stage, few test castings are produced by modifying the process parameters (pouring temperature, pouring time, pre heat and alloy type) and results are compared with simulation results produced using same parameters. The pouring and simulation results are observed to be in good accordance with each other. In second stage, number of virtual iterations of casting is performed by changing riser dimensions. It was found from the simulation results that riser with 35mm diameter is required to produce casting with zero defects. The die is modified accordingly with the simulation results and metal is poured. The castings produced are observed to be sound and contain no defects; and also it is verified that solidification simulation helps in locating the defects, eliminating them and ultimately improving the quality of castings without any shop-floor trails.
Keywords: Aluminum-Alloys, Casting Defects, Gravity Die Casting, Material Density and SOLIDCast Simulation
Parametric analysis and multi objective optimization of cutting parameters in...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Parametric analysis and multi objective optimization of cutting parameters in...eSAT Journals
Abstract Modern manufacturers, seeking to remain competitive in the market, rely on their Manufacturing engineers and production personnel to quickly and effectively set up manufacturing processes for new products. This paper presents the multi response optimization of turning parameters for Turning on AISI 4340 Alloy Steel. Experiments are designed and conducted based on Taguchi’s L27 Orthogonal array design. This paper discusses an investigation into the use of Taguchi parameter Design and Regression analysis to predict and optimize the Surface Roughness, Metal Removal Rate and Power Consumption in turning operations using CVD Cutting Tool. The Analysis of Variance (ANOVA) is employed to analyze the influence of Process Parameters during Turning. This paper also remarks the advantages of multi-objective optimization approach over the single-objective one. The useful results have been obtained by this research for other similar type of studies and can be helpful for further research works on the Tool life and Vibration of tools etc. Keywords: Turning, Ra, MRR, PC, Taguchi, Anova etc…
Friction Stir Welding of Similar Metals by Taguchi Optimization Technique -A ...IJAEMSJORNAL
In order to meet the global competition and the survival of products in the market a new way of thinking is necessary to change and improve the existing technology and to develop products at economical price.This paper discusses use taguchi experiment design technique for maximizing tensile strength of friction stir welding AA6061 and AA6061. In friction stir welding, the joints are formed in the solid state by utilizing the heat generated by friction. The objectives of this study are obtaining friction weld element of aluminium 6061 to aluminium 6061 and optimising the friction stir welding parameters in order to establish the weld quality. Effect of tensile strength of friction stir welding process parameter (Rotational speed, travel speed, axial force and tilt angle) is evaluated and optimum welding condition for maximum tensile strength is determined.
Design and Analysis of Pressure Die Casting for Door Handleijtsrd
Die casting is a metal casting operation that is specified by forcing molten metal under elevated pressure into a mould cavity. The mould cavity is build using two hardened tool steel dies which have been machined into shape and work closely to an injection mould during the process. While casting, a hot or cold chamber machine is used as requirement. While the using of round shaped aluminum door handles it detect that while opening the door whole load is concentrated on two screws which develop in tearing the area where handle is fastened, came in observation that if fastened screw get teared it looks odd . I have redesigned the Door handle maintaining its aesthetic appearance and design to overcome the said identified problem. Lokesh Narayan Dhak | Vaibhav Bankar "Design and Analysis of Pressure Die Casting for Door Handle" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46283.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/46283/design-and-analysis-of-pressure-die-casting-for-door-handle/lokesh-narayan-dhak
DESIGN AND ANALYSIS OF NEW COUPLING SYSTEM IN INJECTION MOLDING MACHINE TO IM...ijiert bestjournal
Injection molding machine is the most commonly used manufacturing process for the fabrication of plastic parts. The plastic being mel ted in injection molding machine and then injected into the mould. The barrel contains recipr ocating screw for injecting the material into the mould and the material is also melted into the barrel. This project deals with,the solution of problem occurred for reciprocating screw of Inje ction molding machine. It identifies and solves the problem by using the modeling and analys is techniques. The problem occurred in the reciprocating screw of machine which is wearing of threads due to affect of temperature of mold materials (flow ma terials) i.e. Nylon,low density polypropylene,polystyrene,PVC etc.,The main work was to model the components of machine with dimensions,and perform thermal analys is with modeled component.
DESIGN OF MOULD TOOL & COOLING CHANNEL OPTIMIZATION OF REMOTE CONTROL TOP PANELIjripublishers Ijri
A plastic material is any of a wide range of synthetic or semi-synthetic organic solids that are moldable. Plastics are
typically organic polymers of high molecular mass, but they often contain other substances. They are usually synthetic,
most commonly derived from petrochemicals, but many are partially natural.
Molding is the process of manufacturing by shaping liquid or pliable raw material using a rigid frame called a mold or
matrix. This itself may have been made using a pattern or model of the final object.
Cooling channels are used in mold tool to reduce the temperature of the object to help molten material to solidify quickly
before the ejection. It is quite useful to increase the production rate.
DESIGN OF MOULD TOOL & COOLING CHANNEL OPTIMIZATION OF REMOTE CONTROL TOP PANELIjripublishers Ijri
A plastic material is any of a wide range of synthetic or semi-synthetic organic solids that are moldable. Plastics are
typically organic polymers of high molecular mass, but they often contain other substances. They are usually synthetic,
most commonly derived from petrochemicals, but many are partially natural.
Molding is the process of manufacturing by shaping liquid or pliable raw material using a rigid frame called a mold or
matrix. This itself may have been made using a pattern or model of the final object.
Cooling channels are used in mold tool to reduce the temperature of the object to help molten material to solidify quickly
before the ejection. It is quite useful to increase the production rate.
The aim of this project work is to design mold structure and optimize cooling channel system to reduce effect of warpage
of remote control top panel.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Conceptual design of injection mold tool for the chair hand rest componenteSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Process optimization of pressure die casting to eliminate defect using cae so...eSAT Journals
Abstract
Die Casting is the manufacturing process by which a liquid material is pressurized in to the mould, which contains a hallow
cavity of the desired shape, and then molten metal is allowed to solidify. The solidified part is known as casting which is ejected
or broken out to complete the process. Objective in this project is to develop tools, dies and gating system. Identify defects such as
gas defects, shrinkage cavities, and mould material defects, pouring material defects, metallurgical defects etc. and take measures
to reduce flaws by using CAE software. To reduce the amount airs entrapped in the mould by changing the gating system, runner
and overflow location and optimize the gating system and process parameters for best quality product and improved productivity.
Defects can be formed easily at critical location during pressure die casting of aluminium alloy part. It has defective effect on the
casting. Mould filling and solidification process of a part was simulated using Z-cast software.
Key Words: Casting, HPDC, Z-cast, CAE Software, Simulation.
Design and Manufacturing of Pet Bottle DieIJMTST Journal
A bottle is a rigid container with a neck that is narrower than the body and a "mouth. Bottles are often made of glass, clay, plastic, aluminum or other impervious materials, and typically used to store liquids such as water, milk, soft drinks, ink, chemicals and etc. A device applied in the bottling line to seal the mouth of a bottle is termed an external bottle cap; the bottle has developed over millennia of use, with some of the earliest examples appearing in China, Phoenicia, Rome and Crete. Bottles are often recycled according to the SPI recycling code for the material. Some regions have a legally mandated deposit which is refunded after returning the bottle to the retailer. Blow molding process is pretty much comparable with injection molding but the only difference is that, in this case, heated liquid plastic vertically pours out of barrel-like pot into molten tubes. The vacuum part is created. Most bottles are formed with this type of molding. Hot plastic resin is combined with a pressurized gas to fill and press the mold cavity, forming a hollow part.
3D modeling is done by pro-engineer.
This project deals with the modeling of cooler tank parametric model as per the client requirement. Finding the best manufacturing process preparing mould base for the same, analyzing different manufacturing process by doing CNC program by changing milling parameters (feed, speed, cutters….).So that optimum parameters for manufacturing will be suggested which is useful to reduce the costs and efforts. Plastic flow analysis will be conducted to check the material flow and filling. So that reduction in the pre-machining cost will be done by rectifying the problem. FEM Based analysis will be conducted on mould structure to reduce weight of the mould. And thermal analysis will be conducted to suggest optimized cooling channel design. Modeling, mould base preparation, manufacturing, cnc programming will be done
This project deals with the modeling of cooler tank parametric model as per the client requirement. Finding the best manufacturing process preparing mould base for the same, analyzing different manufacturing process by doing CNC program by changing milling parameters (feed, speed, cutters….).So that optimum parameters for manufacturing will be suggested which is useful to reduce the costs and efforts. Plastic flow analysis will be conducted to check the material flow and filling. So that reduction in the pre-machining cost will be done by rectifying the problem. FEM Based analysis will be conducted on mould structure to reduce weight of the mould. And thermal analysis will be conducted to suggest optimized cooling channel design. Modeling, mould base preparation, manufacturing, cnc programming will be done
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Similar to Design of Ceiling Fan Regulator Knob (20)
‘Six Sigma Technique’ A Journey Through its Implementationijtsrd
The manufacturing industries all over the world are facing tough challenges for growth, development and sustainability in today’s competitive environment. They have to achieve apex position by adapting with the global competitive environment by delivering goods and services at low cost, prime quality and better price to increase wealth and consumer satisfaction. Cost Management ensures profit, growth and sustainability of the business with implementation of Continuous Improvement Technique like Six Sigma. This leads to optimize Business performance. The method drives for customer satisfaction, low variation, reduction in waste and cycle time resulting into a competitive advantage over other industries which did not implement it. The main objective of this paper ‘Six Sigma Technique A Journey Through Its Implementation’ is to conceptualize the effectiveness of Six Sigma Technique through the journey of its implementation. Aditi Sunilkumar Ghosalkar "‘Six Sigma Technique’: A Journey Through its Implementation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64546.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64546/‘six-sigma-technique’-a-journey-through-its-implementation/aditi-sunilkumar-ghosalkar
Edge Computing in Space Enhancing Data Processing and Communication for Space...ijtsrd
Edge computing, a paradigm that involves processing data closer to its source, has gained significant attention for its potential to revolutionize data processing and communication in space missions. With the increasing complexity and data volume generated by modern space missions, traditional centralized computing approaches face challenges related to latency, bandwidth, and security. Edge computing in space, involving on board processing and analysis of data, offers promising solutions to these challenges. This paper explores the concept of edge computing in space, its benefits, applications, and future prospects in enhancing space missions. Manish Verma "Edge Computing in Space: Enhancing Data Processing and Communication for Space Missions" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64541.pdf Paper Url: https://www.ijtsrd.com/computer-science/artificial-intelligence/64541/edge-computing-in-space-enhancing-data-processing-and-communication-for-space-missions/manish-verma
Dynamics of Communal Politics in 21st Century India Challenges and Prospectsijtsrd
Communal politics in India has evolved through centuries, weaving a complex tapestry shaped by historical legacies, colonial influences, and contemporary socio political transformations. This research comprehensively examines the dynamics of communal politics in 21st century India, emphasizing its historical roots, socio political dynamics, economic implications, challenges, and prospects for mitigation. The historical perspective unravels the intricate interplay of religious identities and power dynamics from ancient civilizations to the impact of colonial rule, providing insights into the evolution of communalism. The socio political dynamics section delves into the contemporary manifestations, exploring the roles of identity politics, socio economic disparities, and globalization. The economic implications section highlights how communal politics intersects with economic issues, perpetuating disparities and influencing resource allocation. Challenges posed by communal politics are scrutinized, revealing multifaceted issues ranging from social fragmentation to threats against democratic values. The prospects for mitigation present a multifaceted approach, incorporating policy interventions, community engagement, and educational initiatives. The paper conducts a comparative analysis with international examples, identifying common patterns such as identity politics and economic disparities. It also examines unique challenges, emphasizing Indias diverse religious landscape, historical legacy, and secular framework. Lessons for effective strategies are drawn from international experiences, offering insights into inclusive policies, interfaith dialogue, media regulation, and global cooperation. By scrutinizing historical epochs, contemporary dynamics, economic implications, and international comparisons, this research provides a comprehensive understanding of communal politics in India. The proposed strategies for mitigation underscore the importance of a holistic approach to foster social harmony, inclusivity, and democratic values. Rose Hossain "Dynamics of Communal Politics in 21st Century India: Challenges and Prospects" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64528.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/history/64528/dynamics-of-communal-politics-in-21st-century-india-challenges-and-prospects/rose-hossain
Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in...ijtsrd
Background and Objective Telehealth has become a well known tool for the delivery of health care in Saudi Arabia, and the perspective and knowledge of healthcare providers are influential in the implementation, adoption and advancement of the method. This systematic review was conducted to examine the current literature base regarding telehealth and the related healthcare professional perspective and knowledge in the Kingdom of Saudi Arabia. Materials and Methods This systematic review was conducted by searching 7 databases including, MEDLINE, CINHAL, Web of Science, Scopus, PubMed, PsycINFO, and ProQuest Central. Studies on healthcare practitioners telehealth knowledge and perspectives published in English in Saudi Arabia from 2000 to 2023 were included. Boland directed this comprehensive review. The researchers examined each connected study using the AXIS tool, which evaluates cross sectional systematic reviews. Narrative synthesis was used to summarise and convey the data. Results Out of 1840 search results, 10 studies were included. Positive outlook and limited knowledge among providers were seen across trials. Healthcare professionals like telehealth for its ability to improve quality, access, and delivery, save time and money, and be successful. Age, gender, occupation, and work experience also affect health workers knowledge. In Saudi Arabia, healthcare professionals face inadequate expert assistance, patient privacy, internet connection concerns, lack of training courses, lack of telehealth understanding, and high costs while performing telemedicine. Conclusions Healthcare practitioners telehealth perceptions and knowledge were examined in this systematic study. Its collection of concerned experts different personal attitudes and expertise would help enhance telehealths implementation in Saudi Arabia, develop its healthcare delivery alternative, and eliminate frequent problems. Badriah Mousa I Mulayhi | Dr. Jomin George | Judy Jenkins "Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in Saudi Arabia: A Systematic Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64535.pdf Paper Url: https://www.ijtsrd.com/medicine/other/64535/assess-perspective-and-knowledge-of-healthcare-providers-towards-elehealth-in-saudi-arabia-a-systematic-review/badriah-mousa-i-mulayhi
The Impact of Digital Media on the Decentralization of Power and the Erosion ...ijtsrd
The impact of digital media on the distribution of power and the weakening of traditional gatekeepers has gained considerable attention in recent years. The adoption of digital technologies and the internet has resulted in declining influence and power for traditional gatekeepers such as publishing houses and news organizations. Simultaneously, digital media has facilitated the emergence of new voices and players in the media industry. Digital medias impact on power decentralization and gatekeeper erosion is visible in several ways. One significant aspect is the democratization of information, which enables anyone with an internet connection to publish and share content globally, leading to citizen journalism and bypassing traditional gatekeepers. Another aspect is the disruption of conventional media industry business models, as traditional organizations struggle to adjust to the decrease in advertising revenue and the rise of digital platforms. Alternative business models, such as subscription models and crowdfunding, have become more prevalent, leading to the emergence of new players. Overall, the impact of digital media on the distribution of power and the weakening of traditional gatekeepers has brought about significant changes in the media landscape and the way information is shared. Further research is required to fully comprehend the implications of these changes and their impact on society. Dr. Kusum Lata "The Impact of Digital Media on the Decentralization of Power and the Erosion of Traditional Gatekeepers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64544.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64544/the-impact-of-digital-media-on-the-decentralization-of-power-and-the-erosion-of-traditional-gatekeepers/dr-kusum-lata
Online Voices, Offline Impact Ambedkars Ideals and Socio Political Inclusion ...ijtsrd
This research investigates the nexus between online discussions on Dr. B.R. Ambedkars ideals and their impact on social inclusion among college students in Gurugram, Haryana. Surveying 240 students from 12 government colleges, findings indicate that 65 actively engage in online discussions, with 80 demonstrating moderate to high awareness of Ambedkars ideals. Statistically significant correlations reveal that higher online engagement correlates with increased awareness p 0.05 and perceived social inclusion. Variations across colleges and a notable effect of college type on perceived social inclusion highlight the influence of contextual factors. Furthermore, the intersectional analysis underscores nuanced differences based on gender, caste, and socio economic status. Dr. Kusum Lata "Online Voices, Offline Impact: Ambedkar's Ideals and Socio-Political Inclusion - A Study of Gurugram District" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64543.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64543/online-voices-offline-impact-ambedkars-ideals-and-sociopolitical-inclusion--a-study-of-gurugram-district/dr-kusum-lata
Problems and Challenges of Agro Entreprenurship A Studyijtsrd
Noting calls for contextualizing Agro entrepreneurs problems and challenges of the agro entrepreneurs and for greater attention to the Role of entrepreneurs in agro entrepreneurship research, we conduct a systematic literature review of extent research in agriculture entrepreneurship to overcome the study objectives of complications of agro entrepreneurs through various factors, Development of agriculture products is a key factor for the overall economic growth of agro entrepreneurs Agro Entrepreneurs produces firsthand large scale employment, utilizes the labor and natural resources, This research outlines the problems of Weather and Soil Erosions, Market price fluctuation, stimulates labor cost problems, reduces concentration of Price volatility, Dependency on Intermediaries, induces Limited Bargaining Power, and Storage and Transportation Costs. This paper mainly devoted to highlight Problems and challenges faced for the sustainable of Agro Entrepreneurs in India. Vinay Prasad B "Problems and Challenges of Agro Entreprenurship - A Study" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64540.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64540/problems-and-challenges-of-agro-entreprenurship--a-study/vinay-prasad-b
Comparative Analysis of Total Corporate Disclosure of Selected IT Companies o...ijtsrd
Disclosure is a process through which a business enterprise communicates with external parties. A corporate disclosure is communication of financial and non financial information of the activities of a business enterprise to the interested entities. Corporate disclosure is done through publishing annual reports. So corporate disclosure through annual reports plays a vital role in the life of all the companies and provides valuable information to investors. The basic objectives of corporate disclosure is to give a true and fair view of companies to the parties related either directly or indirectly like owner, government, creditors, shareholders etc. in the companies act, provisions have been made about mandatory and voluntary disclosure. The IT sector in India is rapidly growing, the trend to invest in the IT sector is rising and employment opportunities in IT sectors are also increasing. Therefore the IT sector is expected to have fair, full and adequate disclosure of all information. Unfair and incomplete disclosure may adversely affect the entire economy. A research study on disclosure practices of IT companies could play an important role in this regard. Hence, the present research study has been done to study and review comparative analysis of total corporate disclosure of selected IT companies of India and to put forward overall findings and suggestions with a view to increase disclosure score of these companies. The researcher hopes that the present research study will be helpful to all selected Companies for improving level of corporate disclosure through annual reports as well as the government, creditors, investors, all business organizations and upcoming researcher for comparative analyses of level of corporate disclosure with special reference to selected IT companies. Dr. Vaibhavi D. Thaker "Comparative Analysis of Total Corporate Disclosure of Selected IT Companies of India" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64539.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64539/comparative-analysis-of-total-corporate-disclosure-of-selected-it-companies-of-india/dr-vaibhavi-d-thaker
The Impact of Educational Background and Professional Training on Human Right...ijtsrd
This study investigated the impact of educational background and professional training on human rights awareness among secondary school teachers in the Marathwada region of Maharashtra, India. The key findings reveal that higher levels of education, particularly a master’s degree, and fields of study related to education, humanities, or social sciences are associated with greater human rights awareness among teachers. Additionally, both pre service teacher training and in service professional development programs focused on human rights education significantly enhance teacher’s knowledge, skills, and competencies in promoting human rights principles in their classrooms. Baig Ameer Bee Mirza Abdul Aziz | Dr. Syed Azaz Ali Amjad Ali "The Impact of Educational Background and Professional Training on Human Rights Awareness among Secondary School Teachers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64529.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64529/the-impact-of-educational-background-and-professional-training-on-human-rights-awareness-among-secondary-school-teachers/baig-ameer-bee-mirza-abdul-aziz
A Study on the Effective Teaching Learning Process in English Curriculum at t...ijtsrd
“One Language sets you in a corridor for life. Two languages open every door along the way” Frank Smith English as a foreign language or as a second language has been ruling in India since the period of Lord Macaulay. But the question is how much we teach or learn English properly in our culture. Is there any scope to use English as a language rather than a subject How much we learn or teach English without any interference of mother language specially in the classroom teaching learning scenario in West Bengal By considering all these issues the researcher has attempted in this article to focus on the effective teaching learning process comparing to other traditional strategies in the field of English curriculum at the secondary level to investigate whether they fulfill the present teaching learning requirements or not by examining the validity of the present curriculum of English. The purpose of this study is to focus on the effectiveness of the systematic, scientific, sequential and logical transaction of the course between the teachers and the learners in the perspective of the 5Es programme that is engage, explore, explain, extend and evaluate. Sanchali Mondal | Santinath Sarkar "A Study on the Effective Teaching Learning Process in English Curriculum at the Secondary Level of West Bengal" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd62412.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/62412/a-study-on-the-effective-teaching-learning-process-in-english-curriculum-at-the-secondary-level-of-west-bengal/sanchali-mondal
The Role of Mentoring and Its Influence on the Effectiveness of the Teaching ...ijtsrd
This paper reports on a study which was conducted to investigate the role of mentoring and its influence on the effectiveness of the teaching of Physics in secondary schools in the South West Region of Cameroon. The study adopted the convergent parallel mixed methods design, focusing on respondents in secondary schools in the South West Region of Cameroon. Both quantitative and qualitative data were collected, analysed separately, and the results were compared to see if the findings confirm or disconfirm each other. The quantitative analysis found that majority of the respondents 72 of Physics teachers affirmed that they had more experienced colleagues as mentors to help build their confidence, improve their teaching, and help them improve their effectiveness and efficiency in guiding learners’ achievements. Only 28 of the respondents disagreed with these statements. With majority respondents 72 agreeing with the statements, it implies that in most secondary schools, experienced Physics teachers act as mentors to build teachers’ confidence in teaching and improving students’ learning. The interview qualitative data analysis summarized how secondary school Principals use meetings with mentors and mentees to promote mentorship in the school milieu. This has helped strengthen teachers’ classroom practices in secondary schools in the South West Region of Cameroon. With the results confirming each other, the study recommends that mentoring should focus on helping teachers employ social interactions and instructional practices feedback and clarity in teaching that have direct measurable impact on students’ learning achievements. Andrew Ngeim Sumba | Frederick Ebot Ashu | Peter Agborbechem Tambi "The Role of Mentoring and Its Influence on the Effectiveness of the Teaching of Physics in Secondary Schools in the South West Region of Cameroon" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64524.pdf Paper Url: https://www.ijtsrd.com/management/management-development/64524/the-role-of-mentoring-and-its-influence-on-the-effectiveness-of-the-teaching-of-physics-in-secondary-schools-in-the-south-west-region-of-cameroon/andrew-ngeim-sumba
Design Simulation and Hardware Construction of an Arduino Microcontroller Bas...ijtsrd
This study primarily focuses on the design of a high side buck converter using an Arduino microcontroller. The converter is specifically intended for use in DC DC applications, particularly in standalone solar PV systems where the PV output voltage exceeds the load or battery voltage. To evaluate the performance of the converter, simulation experiments are conducted using Proteus Software. These simulations provide insights into the input and output voltages, currents, powers, and efficiency under different state of charge SoC conditions of a 12V,70Ah rechargeable lead acid battery. Additionally, the hardware design of the converter is implemented, and practical data is collected through operation, monitoring, and recording. By comparing the simulation results with the practical results, the efficiency and performance of the designed converter are assessed. The findings indicate that while the buck converter is suitable for practical use in standalone PV systems, its efficiency is compromised due to a lower output current. Chan Myae Aung | Dr. Ei Mon "Design Simulation and Hardware Construction of an Arduino-Microcontroller Based DC-DC High-Side Buck Converter for Standalone PV System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64518.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/64518/design-simulation-and-hardware-construction-of-an-arduinomicrocontroller-based-dcdc-highside-buck-converter-for-standalone-pv-system/chan-myae-aung
Sustainable Energy by Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadikuijtsrd
Energy becomes sustainable if it meets the needs of the present without compromising the ability of future generations to meet their own needs. Some of the definitions of sustainable energy include the considerations of environmental aspects such as greenhouse gas emissions, social, and economic aspects such as energy poverty. Generally far more sustainable than fossil fuel are renewable energy sources such as wind, hydroelectric power, solar, and geothermal energy sources. Worthy of note is that some renewable energy projects, like the clearing of forests to produce biofuels, can cause severe environmental damage. The sustainability of nuclear power which is a low carbon source is highly debated because of concerns about radioactive waste, nuclear proliferation, and accidents. The switching from coal to natural gas has environmental benefits, including a lower climate impact, but could lead to delay in switching to more sustainable options. “Carbon capture and storage” can be built into power plants to remove the carbon dioxide CO2 emissions, but this technology is expensive and has rarely been implemented. Leading non renewable energy sources around the world is fossil fuels, coal, petroleum, and natural gas. Nuclear energy is usually considered another non renewable energy source, although nuclear energy itself is a renewable energy source, but the material used in nuclear power plants is not. The paper addresses the issue of sustainable energy, its attendant benefits to the future generation, and humanity in general. Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadiku "Sustainable Energy" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64534.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/64534/sustainable-energy/paul-a-adekunte
Concepts for Sudan Survey Act Implementations Executive Regulations and Stand...ijtsrd
This paper aims to outline the executive regulations, survey standards, and specifications required for the implementation of the Sudan Survey Act, and for regulating and organizing all surveying work activities in Sudan. The act has been discussed for more than 5 years. The Land Survey Act was initiated by the Sudan Survey Authority and all official legislations were headed by the Sudan Ministry of Justice till it was issued in 2022. The paper presents conceptual guidelines to be used for the Survey Act implementation and to regulate the survey work practice, standardizing the field surveys, processing, quality control, procedures, and the processes related to survey work carried out by the stakeholders and relevant authorities in Sudan. The conceptual guidelines are meant to improve the quality and harmonization of geospatial data and to aid decision making processes as well as geospatial information systems. The established comprehensive executive regulations will govern and regulate the implementation of the Sudan Survey Geomatics Act in all surveying and mapping practices undertaken by the Sudan Survey Authority SSA and state local survey departments for public or private sector organizations. The targeted standards and specifications include the reference frame, projection, coordinate systems, and the guidelines and specifications that must be followed in the field of survey work, processes, and mapping products. In the last few decades, there has been a growing awareness of the importance of geomatics activities and measurements on the Earths surface in space and time, together with observing and mapping the changes. In such cases, data must be captured promptly, standardized, and obtained with more accuracy and specified in much detail. The paper will also highlight the current situation in Sudan, the degree to which survey standards are used, the problems encountered, and the errors that arise from not using the standards and survey specifications. Kamal A. A. Sami "Concepts for Sudan Survey Act Implementations - Executive Regulations and Standards" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63484.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63484/concepts-for-sudan-survey-act-implementations--executive-regulations-and-standards/kamal-a-a-sami
Towards the Implementation of the Sudan Interpolated Geoid Model Khartoum Sta...ijtsrd
The discussions between ellipsoid and geoid have invoked many researchers during the recent decades, especially during the GNSS technology era, which had witnessed a great deal of development but still geoid undulation requires more investigations. To figure out a solution for Sudans local geoid, this research has tried to intake the possibility of determining the geoid model by following two approaches, gravimetric and geometrical geoid model determination, by making use of GNSS leveling benchmarks at Khartoum state. The Benchmarks are well distributed in the study area, in which, the horizontal coordinates and the height above the ellipsoid have been observed by GNSS while orthometric heights were carried out using precise leveling. The Global Geopotential Model GGM represented in EGM2008 has been exploited to figure out the geoid undulation at the benchmarks in the study area. This is followed by a fitting process, that has been done to suit the geoid undulation data which has been computed using GNSS leveling data and geoid undulation inspired by the EGM2008. Two geoid surfaces were created after the fitting process to ensure that they are identical and both of them could be counted for getting the same geoid undulation with an acceptable accuracy. In this respect, statistical operation played an important role in ensuring the consistency and integrity of the model by applying cross validation techniques splitting the data into training and testing datasets for building the geoid model and testing its eligibility. The geometrical solution for geoid undulation computation has been utilized by applying straightforward equations that facilitate the calculation of the geoid undulation directly through applying statistical techniques for the GNSS leveling data of the study area to get the common equation parameters values that could be utilized to calculate geoid undulation of any position in the study area within the claimed accuracy. Both systems were checked and proved eligible to be used within the study area with acceptable accuracy which may contribute to solving the geoid undulation problem in the Khartoum area, and be further generalized to determine the geoid model over the entire country, and this could be considered in the future, for regional and continental geoid model. Ahmed M. A. Mohammed. | Kamal A. A. Sami "Towards the Implementation of the Sudan Interpolated Geoid Model (Khartoum State Case Study)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63483.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63483/towards-the-implementation-of-the-sudan-interpolated-geoid-model-khartoum-state-case-study/ahmed-m-a-mohammed
Activating Geospatial Information for Sudans Sustainable Investment Mapijtsrd
Sudan is witnessing an acceleration in the processes of development and transformation in the performance of government institutions to raise the productivity and investment efficiency of the government sector. The development plans and investment opportunities have focused on achieving national goals in various sectors. This paper aims to illuminate the path to the future and provide geospatial data and information to develop the investment climate and environment for all sized businesses, and to bridge the development gap between the Sudan states. The Sudan Survey Authority SSA is the main advisor to the Sudan Government in conducting surveying, mappings, designing, and developing systems related to geospatial data and information. In recent years, SSA made a strategic partnership with the Ministry of Investment to activate Geospatial Information for Sudans Sustainable Investment and in particular, for the preparation and implementation of the Sudan investment map, based on the directives and objectives of the Ministry of Investment MI in Sudan. This paper comes within the framework of activating the efforts of the Ministry of Investment to develop technical investment services by applying techniques adopted by the Ministry and its strategic partners for advancing investment processes in the country. Kamal A. A. Sami "Activating Geospatial Information for Sudan's Sustainable Investment Map" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63482.pdf Paper Url: https://www.ijtsrd.com/engineering/information-technology/63482/activating-geospatial-information-for-sudans-sustainable-investment-map/kamal-a-a-sami
Educational Unity Embracing Diversity for a Stronger Societyijtsrd
In a rapidly changing global landscape, the importance of education as a unifying force cannot be overstated. This paper explores the crucial role of educational unity in fostering a stronger and more inclusive society through the embrace of diversity. By examining the benefits of diverse learning environments, the paper aims to highlight the positive impact on societal strength. The discussion encompasses various dimensions, from curriculum design to classroom dynamics, and emphasizes the need for educational institutions to become catalysts for unity in diversity. It highlights the need for a paradigm shift in educational policies, curricula, and pedagogical approaches to ensure that they are reflective of the diverse fabric of society. This paper also addresses the challenges associated with implementing inclusive educational practices and offers practical strategies for overcoming barriers. It advocates for collaborative efforts between educational institutions, policymakers, and communities to create a supportive ecosystem that promotes diversity and unity. Mr. Amit Adhikari | Madhumita Teli | Gopal Adhikari "Educational Unity: Embracing Diversity for a Stronger Society" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64525.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64525/educational-unity-embracing-diversity-for-a-stronger-society/mr-amit-adhikari
Integration of Indian Indigenous Knowledge System in Management Prospects and...ijtsrd
The diversity of indigenous knowledge systems in India is vast and can vary significantly between different communities and regions. Preserving and respecting these knowledge systems is crucial for maintaining cultural heritage, promoting sustainable practices, and fostering cross cultural understanding. In this paper, an overview of the prospects and challenges associated with incorporating Indian indigenous knowledge into management is explored. It is found that IIKS helps in management in many areas like sustainable development, tourism, food security, natural resource management, cultural preservation and innovation, etc. However, IIKS integration with management faces some challenges in the form of a lack of documentation, cultural sensitivity, language barriers legal framework, etc. Savita Lathwal "Integration of Indian Indigenous Knowledge System in Management: Prospects and Challenges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63500.pdf Paper Url: https://www.ijtsrd.com/management/accounting-and-finance/63500/integration-of-indian-indigenous-knowledge-system-in-management-prospects-and-challenges/savita-lathwal
DeepMask Transforming Face Mask Identification for Better Pandemic Control in...ijtsrd
The COVID 19 pandemic has highlighted the crucial need of preventive measures, with widespread use of face masks being a key method for slowing the viruss spread. This research investigates face mask identification using deep learning as a technological solution to be reducing the risk of coronavirus transmission. The proposed method uses state of the art convolutional neural networks CNNs and transfer learning to automatically recognize persons who are not wearing masks in a variety of circumstances. We discuss how this strategy improves public health and safety by providing an efficient manner of enforcing mask wearing standards. The report also discusses the obstacles, ethical concerns, and prospective applications of face mask detection systems in the ongoing fight against the pandemic. Dilip Kumar Sharma | Aaditya Yadav "DeepMask: Transforming Face Mask Identification for Better Pandemic Control in the COVID-19 Era" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64522.pdf Paper Url: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/64522/deepmask-transforming-face-mask-identification-for-better-pandemic-control-in-the-covid19-era/dilip-kumar-sharma
Streamlining Data Collection eCRF Design and Machine Learningijtsrd
Efficient and accurate data collection is paramount in clinical trials, and the design of Electronic Case Report Forms eCRFs plays a pivotal role in streamlining this process. This paper explores the integration of machine learning techniques in the design and implementation of eCRFs to enhance data collection efficiency. We delve into the synergies between eCRF design principles and machine learning algorithms, aiming to optimize data quality, reduce errors, and expedite the overall data collection process. The application of machine learning in eCRF design brings forth innovative approaches to data validation, anomaly detection, and real time adaptability. This paper discusses the benefits, challenges, and future prospects of leveraging machine learning in eCRF design for streamlined and advanced data collection in clinical trials. Dhanalakshmi D | Vijaya Lakshmi Kannareddy "Streamlining Data Collection: eCRF Design and Machine Learning" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63515.pdf Paper Url: https://www.ijtsrd.com/biological-science/biotechnology/63515/streamlining-data-collection-ecrf-design-and-machine-learning/dhanalakshmi-d
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
2. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID - IJTSRD22825 | Volume – 3 | Issue – 3 | Mar-Apr 2019 Page: 538
Figure No.1 Dimension of Knob.
Other details of model are given below:-
Component name: circular knob
Component material: PP (polypropylene)
Shrinkage: 1.5
Moulding type: Eight Cavity injection mould tool
Figure No. 2 3D model of Knob.
IV. DESIGN OF MOULD
This section describes the design aspects and other
Considerations involved in designing the mould to Produce
plastic box.
Three design concepts is considered in designing of the
mould including:
1. Three-plate mould (Concept 1)hastwopartinglinewith
single cavity.
2. Two-plate mould (Concept 2) has one parting line with
many cavities with gating and ejection system.
3. Two-plate mould (Concept 3) has one parting line with
single cavity without gating system.
For designing the mould first concept had been applied.
First, the mould was designed based on the flat dimension of
the plastic injection machine used. Mostly, core and cavity
extraction was done on the basis of the criticality of the
component, after core-cavity extraction from specified
modeling software, mold base also modeled on the same
software, at last core cavity inserts are assembled into the
mold base.
Design calculation
Numeric calculation to be carried outtopredicttheweight of
the component, Shot Capacity, Plasticizing Capacity
,Clamping Capacity, on which machine mold to be loaded,
plasticizing and shot capacity of the machine, and cooling
parameters like inlet and outlet temperature effect,quantity
of water to be circulate. These results are tally with the
simulation results during moulding.
Data from CAD model
Material = Polypropylene
Mass = 10 grams
QB = 546 KJ/Kg
Density = 1 kg/dm3
Moulding Temp = 250 0C
Calculation of Number Cavities Based on:-
1. Shot Capacity
Ns=
Where,
Ns: Number of cavities based on shot capacity
M: - Mass of component.
W: - shot capacity for polymer
Sv: - Swept Volume
C: - Constant
ρ :- Density of material.
Sv= 100 cm2
W 1 0.95
W = 66.5 gm.
Ns =5.65
5
2. Plasticizing Capacity
Where,
Np:- Number of Cavities Based on Plasticizing Capacity.
Tc = cycle time
Tc=
M = Mass = 10 gram.
Ps :- Plasticizing Capacity of Machine
= 6.1 kg/hr
Tc=
Tc = 5.9 second.
QA- Total Heat Content of Polystyrene.
QB- Total Heat Content of Material.
P=
P=
P = 6.1 Kg/hr.
Np=
Np = 8.4 8
Determination of number of cavity
From the above calculation of component and its shape and
size 8 cavity moulds is preferred.
V. TOOL ASSEMBLY
Tool assembly is done in modeling software, includes the
positioning of extracted core and cavity inserts into the
mould base, after assembly3Dmodelsare convertedintothe
2D drawings for manufacturing process.
3. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID - IJTSRD22825 | Volume – 3 | Issue – 3 | Mar-Apr 2019 Page: 539
Figure No.3 Core Cavity Extraction (Exploded view)
Figure No. 4 Assembly of mould tool
Figure No.5 3D model Assembly of Mould Tool
Figure No.4 Drafting of Mould Assembly.
VI. CONCLUSION
In this project, we carried out the Design of Ceiling Fan
Regulator Knob. The complete injection mould tool is
designed for fabricating knob by using solidwork. All the
parts of assembly get fitted exactly and has not shown any
error in software.
VII. REFERENCES
[1] N.Divya, Dr. Ch. V. S. Parameswara Rao, Dr. S. S. N.
Malleswara Rao “Design and Analysis of Cold Runner
Injection Mould for Ceiling Fan Regulator Knob”,
INTERNATIONAL JOURNAL OF SCIENTIFIC AND
RESEARCH PUBLICATIONS, VOLUME 7, ISSUE 3,
MARCH 2017
[2] Ms Snehal A. Kamble, A.N.Surde, Swapnil S. KulKarni
“Validation for plastic injection mold design for
automotive switches”, INTERNATIONAL JOURNAL OF
ADVANCED ENGINEERING RESEARCH AND STUDIES,
OCT-DEC. 2013.
[3] Dr. J. FazlurRahman, Mohammed Yunus, Mohammed
Irfan, T. M. Tajuddin Yezdani, “Optimizing the Die
Design Parameters for FRP Components Produced in
Injection Molding using Mold Flow Analysis”, Dr. J.
FazlurRahman,Mohammed Yunus,MohammedIrfan,T.
M. Tajuddin Yezdani International Journal of
Engineering Research and Applications (IJERA),
(2012).
[4] SharifahImihezriSyedShaharuddin, Mohd.SapuanSalit,
Edi SyamsZainudin, “A Review of theeffectof Moulding
Parameters on the Performance of Polymeric
Composite Injection Moulding”, Turkish J. Eng.Env.Sci.
30, (2006)
[5] Bown, J., “Injection Moulding of Plastic Components”,
McGraw-Hill,
[6] Book on Injection mould design by R.G.W.PYE
[7] http://www.bayer.com/polymers-usa
[8] http://www.academia.edu/1206855/AADCAEIntegrat
e Injection_Molding_Design System
[9] http://www.compasstech.com/visi-flow/
[10] http://en.wikipedia.org/wiki/Injection_molding
