데이타맥스, Datamax-O'Neil P시리즈는 수년 동안 감열식 프린터가 가지고 있던 여러가지 문제를 해결할 수 있도록 설계된 새롭고 혁신적인 산업용 바코드 프린터 제품군입니다.
P 시리즈 (Performance Series) 산업용 바코드 프린터는 뛰어난 인쇄품질, 자동로드 기능, 사용자 친화적 컬러, 터치 스크린, 프린터 표준 언어 인 PCL을 제공합니다.
PCL은 다양한 운영 체제에서 실행되도록 표준화되어 있으므로 컴퓨터에서 실행되는 모든 응용 프로그램 소프트웨어와 독립적이어서 플러그 & 플레이 통합이 보다 빠르고 쉽게 프린터 시스템을 가동 할 수 있습니다.
P 시리즈 (Performance Series) 산업용 바코드 프린터는 최고로 열악한 산업 환경에서도 무단하게 작동될 수 있도록 다이 캐스트 프레임과 금속 커버로 제작되었습니다.
Non-Proprietary PCL :
The Performance Series offers PCL, a globally adopted standard/laser compatible printer language that allows easy integration into SAP® and other network environments.
Most Advanced Interface :
The industry’s most intuitive color touchscreen makes set up and performance enhancements as simple as 1-2-3. The printer provides front panel print quality adjustments, auto media calibration and loading as well as ribbon tensioning controls.
Options Galore! :
The Performance Series printers are available with numerous options to meet the most diverse requirements. Some of the options include internal rewinder, peeler and cutter, USB host, GPIO, 802.11 b/g, audio alarm.
적용분야
제조 및 생산:
자산 이력 추적
완제품 마킹
대행사 라벨
케이스 라벨
운송 및 물류:
크로스 도킹
정렬 센터
배송 라벨
팔레트 이력 추적
음식 및 음료:
고해상도 라벨링
만료일 및 타임 스탬프
제품 식별
배송 라벨
제약:
준수 라벨
식별 라벨
이력 추적
목록 라벨
MODELS : P1115
Max Print Speed : 6ips/152mmps
Resolution : 300dpi/11.8dpmm
Max Print Width : 4.16in / 105.7mm
Label Width : 1”-4.65” (25.4-118.1mm)
Dimensions (WxDxH) : 10.8" x 18.7" x 11.9", 274mm x 475mm x 302mm
Wegits : 41lbs/19kg
MODELS : P1115s
Max Print Speed : 6ips/152mmps
Resolution : 600dpi/23.6dpmm
Max Print Width : 4.16in / 105.7mm
Label Width : 1”-4.65” (25.4-118.1mm)
Dimensions (WxDxH) : 10.8" x 18.7" x 11.9", 274mm x 475mm x 302mm
Wegits : 41lbs/19kg
MODELS : P1125
Max Print Speed : 10ips/254mmps
Resolution : 300dpi/11.8dpmm
Max Print Width : 4.27in / 108.5mm
Label Width : 1”-4.65” (25.4-118.1mm)
Dimensions (WxDxH) : 10.8" x 18.7" x 11.9", 274mm x 475mm x 302mm
Wegits : 41lbs/19kg
MODELS : P1725
Max Print Speed : 10ips/254mmps
Resolution : 300dpi/11.8dpmm
Max Print Width : 6.83in / 173.5mm
Label Width : 2”-7.1” (50.8mm-180.3mm)
Dimensions (WxDxH) : 13.4" x 18.7" x 11.9", 339mm x 475mm x 302mm
Wegits : 52lbs/24kg
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
데이타맥스프린터 Datamax H-Class 열전사감열 RFID 산업용 바코드프린터 매뉴얼HION IT
데이타맥스 H-Class 바코드프린터는 견고하고 다양하며 풍부한 기능을 갖춘 동급 프린터로 동급 두배의 속도를 자랑합니다.
H-Class 바코드프린터는 제조, 창고, 운송 및 고해상도 바코드 라벨링에서 대량 라벨 인쇄에 이상적입니다.
H-Class는 기어 구동방식 설계로 총 구매비용을 줄였고 24시간 7일 작업 환경에 견고하고 안정적인 성능을 제공합니다.
H-Class는 다양한 응용 프로그램 요구 사항을 충족시키기 위해 광범위한 연결성을 제공하며 모든 네트워크에 쉽게 통합됩니다.
또한 모듈식 구성은 사용자에 최고 수준의 생산성을 위해 가동 시간을 늘립니다.
데이타맥스 H-Class는 업계 최대 규모의 그래픽 디스플레이를 가지고 있으며 빠른 탐색 및 프린터 알림을 위한 읽기 쉬운 화면을 제공합니다.
고품질의 기능, 성능 및 견고한 안정성으로 H-Class는 시장에 나와있는 프리미엄 프린터 중 최고의 가치를 제공합니다.
Connectivity : H-Class printers come standard with Ethernet, Parallel, Serial, and USB/SDIO interfaces for extra capacity models giving users flexibility in integration.
Rugged construction features a geardriven design and durable die-cast aluminum frame.
Wide range offering includes 203, 300, 406, and 600 dpi resolution models.
Multi-language menu available in English, Spanish, German, Italian, and French.
Large 240x320 graphical LCD display for ease in navigating menus as well as data collection (“X” models only).
Field installable options such as cutters, peel & present sensors, and thermal transfer option can be added easily to upgrade a base printer.
Versatile media compatibility supports coated side in or coated side out ribbons without reconfiguring the printer or purchasing additional options resulting in easier ribbon inventory management.
IntelliSEAQ™ printhead: proactive diagnostic tools allow easy access to printhead performance and history.
Software: The H-Class utilizes widely used DPL and supports MCL designer and 123 Print. With the PL-Z and PL-I printer language emulations, users can easily integrate the printer to existing solutions.
적용분야
제조 및 생산:
자산 이력 추적
완제품 마킹
대행사 라벨
케이스 라벨
운송 및 물류:
크로스 도킹
정렬 센터
배송 라벨
팔레트 이력 추적
음식 및 음료:
고해상도 라벨링
만료일 및 타임 스탬프
제품 식별
배송 라벨
제약:
준수 라벨
식별 라벨
이력 추적
목록 라벨
PRINT TECHNOLOGY
Printer type :
Direct thermal
Optional thermal transfer
Print length range :
0.25” - 99.99” (6mm - 2539.75mm); values vary with printer configuration
PHYSICAL CHARACTERISTICS
Dimensions and weights:
4” standard: 40 lbs. (18.2 kg), 13.0”h x 12.6”w x 18.9”d (330 x 321 x 480mm)
4” X series: 47 lbs. (21.4 kg), 16.4”h x 12.6”w x 19.3”d (415 x 321 x 489mm)
6” standard: 47 lbs. (21.4 kg), 13.0”h x 15.0”w x 18.9”d (330 x 381 x 480mm)
6” X series: 53 lbs. (24.1 kg), 16.4”h x 15.0”w x 19.3”d (415 x 381 x 489mm)
8” X series: 59 lbs. (26.8 kg), 16.4”h x 17.0”w x 19.3”d (415 x 433 x 489mm)
Operating temperature : 32°F to 100°F (0°C to 38°C)
Storage temperature : 0°F to 140°F (-17°C to 60°C)
Humidity : 10% - 95% non-condensing
Power source :
Auto-sensing 90-132 or 180-264 VAC @ 47-63Hz
On-board real time clock
LCD backlit graphics display
Construction:
Metal cabinet, clear side window to easily monitor media supply levels
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
데이타맥스프린터 Datamax M-Class 열전사감열 산업용 범용바코드프린터 매뉴얼HION IT
데이타맥스 M-Class 바코드프린터는 범용프린터로 USB 인쇄 지원을 통한 범용성 및 산업용 모델의 내구성을 더한 프린터 제품입니다.
데이타맥스 M-Class 바코드프린터는 범용프린터 군 중 가격 대비 성능이 가장 뛰어난 모델입니다.
혁신적인 모듈식 설계로 사용자가 현장에서 손쉽운 설치작업이 가능하도록 제작되었습니다.
철강, 자동차, 화학, 제조, 통신, 공공기관, 식품, 제약, 병원, 유통, 물류 창고, 도소매, 택배업체 등 다양한 업계에서 사용됩니다.
Form factor with a small footprint for an industrial printer to fit in tight spaces where work space is a premium
Rugged construction features a precision die-cast aluminum frame
Real time clock for accurate date-time labeling
Multi-language menu available in English, Spanish, German, Italian, and French
5-button, 128x64 LCD graphical backlit display is easy to read, enabling userfriendly label configuration set-up
Field installable options such as cutters, peel & present sensors, and thermal transfer option can be added easily to upgrade a base printer
Versatile media compatibility supports coated side in or coated side out ribbons without reconfiguring the printer or purchasing additional options resulting in easier ribbon inventory management
IntelliSEAQ™ printhead: proactive diagnostic tools allow easy access to printhead performance and history
Software: The M-Class utilizes widely used DPL and supports MCL designer and 123 Print. With the PL-Z and PL-I printer language emulations, users can easily integrate the printer to existing solutions
Increased productivity :
M-Class Mark II keeps up with high label demand applications, boasting 32% faster performance than the nearest competitor in its class. The modular design and field-installable options cut back on downtime and improve efficiency. With its unique form factor, the M-Class Mark II fits easily in tight spaces where work space is a premium.
One printer does it all :
The M-Class Mark II printer can be used in a wide variety of applications with a range of media compatibility, connectivity, emulation support, and options including RFID support. It is easy on the budget with the best value proposition for an industrial strength printer.
MODELS : M-4206
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 6 IPS (152 mm/s)
Resolution : 203 DPI (8 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Not available
MODELS : M-4210
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 10 IPS (254 mm/s)
Resolution : 203 DPI (8 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Available
MODELS : M-4308
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 8 IPS (203 mm/s)
Resolution : 300 DPI (12 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Available
PRINT TECHNOLOGY
Maximum print width : 4.25” (108mm)
Print length range : 0.25” - 99” (6.35mm - 2514.6mm)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
ICARvisions is a solutions based, global leader specializing in vehicle related hardware and software design, manufacture and deployment of Mobile Digital Video Recorders (MDVR), Mobile Network Video Recorders (MNVR) and Sensors, Cameras, Cables, and Accessories. Contact:lilac@icarvisions.com
데이타맥스프린터 Datamax H-Class 열전사감열 RFID 산업용 바코드프린터 매뉴얼HION IT
데이타맥스 H-Class 바코드프린터는 견고하고 다양하며 풍부한 기능을 갖춘 동급 프린터로 동급 두배의 속도를 자랑합니다.
H-Class 바코드프린터는 제조, 창고, 운송 및 고해상도 바코드 라벨링에서 대량 라벨 인쇄에 이상적입니다.
H-Class는 기어 구동방식 설계로 총 구매비용을 줄였고 24시간 7일 작업 환경에 견고하고 안정적인 성능을 제공합니다.
H-Class는 다양한 응용 프로그램 요구 사항을 충족시키기 위해 광범위한 연결성을 제공하며 모든 네트워크에 쉽게 통합됩니다.
또한 모듈식 구성은 사용자에 최고 수준의 생산성을 위해 가동 시간을 늘립니다.
데이타맥스 H-Class는 업계 최대 규모의 그래픽 디스플레이를 가지고 있으며 빠른 탐색 및 프린터 알림을 위한 읽기 쉬운 화면을 제공합니다.
고품질의 기능, 성능 및 견고한 안정성으로 H-Class는 시장에 나와있는 프리미엄 프린터 중 최고의 가치를 제공합니다.
Connectivity : H-Class printers come standard with Ethernet, Parallel, Serial, and USB/SDIO interfaces for extra capacity models giving users flexibility in integration.
Rugged construction features a geardriven design and durable die-cast aluminum frame.
Wide range offering includes 203, 300, 406, and 600 dpi resolution models.
Multi-language menu available in English, Spanish, German, Italian, and French.
Large 240x320 graphical LCD display for ease in navigating menus as well as data collection (“X” models only).
Field installable options such as cutters, peel & present sensors, and thermal transfer option can be added easily to upgrade a base printer.
Versatile media compatibility supports coated side in or coated side out ribbons without reconfiguring the printer or purchasing additional options resulting in easier ribbon inventory management.
IntelliSEAQ™ printhead: proactive diagnostic tools allow easy access to printhead performance and history.
Software: The H-Class utilizes widely used DPL and supports MCL designer and 123 Print. With the PL-Z and PL-I printer language emulations, users can easily integrate the printer to existing solutions.
적용분야
제조 및 생산:
자산 이력 추적
완제품 마킹
대행사 라벨
케이스 라벨
운송 및 물류:
크로스 도킹
정렬 센터
배송 라벨
팔레트 이력 추적
음식 및 음료:
고해상도 라벨링
만료일 및 타임 스탬프
제품 식별
배송 라벨
제약:
준수 라벨
식별 라벨
이력 추적
목록 라벨
PRINT TECHNOLOGY
Printer type :
Direct thermal
Optional thermal transfer
Print length range :
0.25” - 99.99” (6mm - 2539.75mm); values vary with printer configuration
PHYSICAL CHARACTERISTICS
Dimensions and weights:
4” standard: 40 lbs. (18.2 kg), 13.0”h x 12.6”w x 18.9”d (330 x 321 x 480mm)
4” X series: 47 lbs. (21.4 kg), 16.4”h x 12.6”w x 19.3”d (415 x 321 x 489mm)
6” standard: 47 lbs. (21.4 kg), 13.0”h x 15.0”w x 18.9”d (330 x 381 x 480mm)
6” X series: 53 lbs. (24.1 kg), 16.4”h x 15.0”w x 19.3”d (415 x 381 x 489mm)
8” X series: 59 lbs. (26.8 kg), 16.4”h x 17.0”w x 19.3”d (415 x 433 x 489mm)
Operating temperature : 32°F to 100°F (0°C to 38°C)
Storage temperature : 0°F to 140°F (-17°C to 60°C)
Humidity : 10% - 95% non-condensing
Power source :
Auto-sensing 90-132 or 180-264 VAC @ 47-63Hz
On-board real time clock
LCD backlit graphics display
Construction:
Metal cabinet, clear side window to easily monitor media supply levels
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
데이타맥스프린터 Datamax M-Class 열전사감열 산업용 범용바코드프린터 매뉴얼HION IT
데이타맥스 M-Class 바코드프린터는 범용프린터로 USB 인쇄 지원을 통한 범용성 및 산업용 모델의 내구성을 더한 프린터 제품입니다.
데이타맥스 M-Class 바코드프린터는 범용프린터 군 중 가격 대비 성능이 가장 뛰어난 모델입니다.
혁신적인 모듈식 설계로 사용자가 현장에서 손쉽운 설치작업이 가능하도록 제작되었습니다.
철강, 자동차, 화학, 제조, 통신, 공공기관, 식품, 제약, 병원, 유통, 물류 창고, 도소매, 택배업체 등 다양한 업계에서 사용됩니다.
Form factor with a small footprint for an industrial printer to fit in tight spaces where work space is a premium
Rugged construction features a precision die-cast aluminum frame
Real time clock for accurate date-time labeling
Multi-language menu available in English, Spanish, German, Italian, and French
5-button, 128x64 LCD graphical backlit display is easy to read, enabling userfriendly label configuration set-up
Field installable options such as cutters, peel & present sensors, and thermal transfer option can be added easily to upgrade a base printer
Versatile media compatibility supports coated side in or coated side out ribbons without reconfiguring the printer or purchasing additional options resulting in easier ribbon inventory management
IntelliSEAQ™ printhead: proactive diagnostic tools allow easy access to printhead performance and history
Software: The M-Class utilizes widely used DPL and supports MCL designer and 123 Print. With the PL-Z and PL-I printer language emulations, users can easily integrate the printer to existing solutions
Increased productivity :
M-Class Mark II keeps up with high label demand applications, boasting 32% faster performance than the nearest competitor in its class. The modular design and field-installable options cut back on downtime and improve efficiency. With its unique form factor, the M-Class Mark II fits easily in tight spaces where work space is a premium.
One printer does it all :
The M-Class Mark II printer can be used in a wide variety of applications with a range of media compatibility, connectivity, emulation support, and options including RFID support. It is easy on the budget with the best value proposition for an industrial strength printer.
MODELS : M-4206
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 6 IPS (152 mm/s)
Resolution : 203 DPI (8 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Not available
MODELS : M-4210
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 10 IPS (254 mm/s)
Resolution : 203 DPI (8 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Available
MODELS : M-4308
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 8 IPS (203 mm/s)
Resolution : 300 DPI (12 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Available
PRINT TECHNOLOGY
Maximum print width : 4.25” (108mm)
Print length range : 0.25” - 99” (6.35mm - 2514.6mm)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
ICARvisions is a solutions based, global leader specializing in vehicle related hardware and software design, manufacture and deployment of Mobile Digital Video Recorders (MDVR), Mobile Network Video Recorders (MNVR) and Sensors, Cameras, Cables, and Accessories. Contact:lilac@icarvisions.com
데이타맥스프린터 Datamax E-Class Mark III 열전사감열 바코드프린터 매뉴얼HION IT
데이타맥스 E-Class Mark III는 다양한 산업 분야에 맞게 설계된 비용대비 효율성이 높은 소형 데스크탑 열전사 바코드프린터로, 사용하기 쉽고 안정적이고 경제적인 바코드프린터입니다.
E-Class Basic
Basic 모델은 가장 보편적인 모델로서 바코드 어플리케이션에 많이 사용되는 모델, USB 및 시리얼 포트가 기본으로 장착되어 있으며 옵션으로 300 DPI 해상도 지원 및 열전사 옵션, 라벨분리 기능이 있습니다.
E-4204B (203 DPI)
E-4304B (300 DPI)
E-Class Advanced
Advanced 모델은 네트워크 기능과, 빠른 인쇄속도를 요구하는 소비자와 특수라벨 출력시 필요합니다.
또한 Basic 모델에 장착되어 있는 통신포트는 기본 사양이며 병렬 포트와 이더넷 포트가 포함되어 있습니다.
인쇄속도는 초당 5인치까지 가능합니다.
E-4205A (203 DPI)
E-4305A (300 DPI)
E-Class Professional
Professional 모델은 보다 정교한 어플리케이션에 적용이 가능합니다.
그래픽 디스플레이가 기본으로 장착되어 있으며 Read Time Clock 및 알람 기능도 내장되어 있습니다.
옵션으로 무선랜 및 블루투스 기능이 제공합니다.
E-4206P (203 DPI)
E-4305P (300 DPI)
E-Class Professional Plus
Professional Plus 모델은 내장형으로 더욱 큰 지관의 라벨을 필요로 하는 소비자에게 필요합니다.
Professional 모델의 모든 옵션들이 기본으로 장착되어 있으며, 확장된 내장형 라벨 장착 공간과 내장형 접이식 라벨 공급 공간이 제공됩니다.
E-4206L (203 DPI)
E-4305L (300 DPI)
손쉬운 로딩
새롭게 고안된 장치로이해 라벨 및 리본 장착이 쉬워젔습니다.
강력한 제품, 재질
고강도 이중구조로 만들어져서 내구성이 뛰어납니다.
라벨 확인 창
작업자가 라벨프린터 작업 중 직접 라벨의 잔량 확인이 가능합니다.
액체로부터 보호
굳게 닫혀져 있는 E-Class 설계 덕분에 액체로부터 보호가 가능합니다.
리본 비용절감
1인치 지관의 리본 사용이 가능함으로 리본 비용 절감이 가능합니다.
더욱 큰 라벨 장착 가능
Professional Plus 모델에서는 보다 많은 라벨을 수용할 수 있습니다.
내장형 Fan Fold 기능
라벨을 먼지나 다른 이물질로부터 보호 합니다.
손쉬운 유지보수
프린터헤드 및 드라이브 롤러를 아주 쉽게 교체할 수 있습니다.
큰 화면 제공
현재 프린터기의 상태를 표시해 줍니다 (Professional 이상 가능)
적용분야
제조 산업:
자산관리
완제품 관리
에이전시 라벨출력
케이스 라벨
리테일:
아이템 라벨
선반 라벨
세일물품 라벨
반품물품 라벨
우체국 서비스:
선적라벨
택배이력 관리
배달이력 관리
BASIC MODEL : E-4204B (203dpi), E-4304B (300dpi)
The Basic model meets the needs of the most popular barcoding applications. USB and serial ports are included as standard features. Optional 300dpi, thermal transfer and label peeler are also available.
Printer type :
Direct thermal, Optional thermal transfer
Print length range : 0.375” - 99” (9.5mm - 2514mm)
Resolution : 203 dpi (8 dots/mm), Optional 300 dpi (12 dots/mm)
Communication Options : USB 2.0, Serial RS232
Dimensions : 8.01”w x 7.36”h x 11.10”d (203.5mm x187mm x 282mm)
Weight : 84 oz. (2.4 kg)
Speed : 4ips (101mm/s)
Maximum Print Width : 4.25” (108 mm) @ 203dpi (8 dots/mm); 4.16”(106 mm) @ 300dpi (12 dots/mm)
Maximum Internal Media Roll Capacity : 5.0” (127 mm) O.D.
Memory : 64MB Flash / 16MB DRAM
Power Source Options/Accessories :
Fitted Lower Enclosure for Power Converter (optional)
Fitted Lower Enclosure for Power Converter & Battery Pack (accessory)
Indicators/Display : Two Light Indicators with 3 Colors
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
데이타맥스프린터 Datamax E-Class Mark III 열전사감열 바코드프린터 매뉴얼HION IT
데이타맥스 E-Class Mark III는 다양한 산업 분야에 맞게 설계된 비용대비 효율성이 높은 소형 데스크탑 열전사 바코드프린터로, 사용하기 쉽고 안정적이고 경제적인 바코드프린터입니다.
E-Class Basic
Basic 모델은 가장 보편적인 모델로서 바코드 어플리케이션에 많이 사용되는 모델, USB 및 시리얼 포트가 기본으로 장착되어 있으며 옵션으로 300 DPI 해상도 지원 및 열전사 옵션, 라벨분리 기능이 있습니다.
E-4204B (203 DPI)
E-4304B (300 DPI)
E-Class Advanced
Advanced 모델은 네트워크 기능과, 빠른 인쇄속도를 요구하는 소비자와 특수라벨 출력시 필요합니다.
또한 Basic 모델에 장착되어 있는 통신포트는 기본 사양이며 병렬 포트와 이더넷 포트가 포함되어 있습니다.
인쇄속도는 초당 5인치까지 가능합니다.
E-4205A (203 DPI)
E-4305A (300 DPI)
E-Class Professional
Professional 모델은 보다 정교한 어플리케이션에 적용이 가능합니다.
그래픽 디스플레이가 기본으로 장착되어 있으며 Read Time Clock 및 알람 기능도 내장되어 있습니다.
옵션으로 무선랜 및 블루투스 기능이 제공합니다.
E-4206P (203 DPI)
E-4305P (300 DPI)
E-Class Professional Plus
Professional Plus 모델은 내장형으로 더욱 큰 지관의 라벨을 필요로 하는 소비자에게 필요합니다.
Professional 모델의 모든 옵션들이 기본으로 장착되어 있으며, 확장된 내장형 라벨 장착 공간과 내장형 접이식 라벨 공급 공간이 제공됩니다.
E-4206L (203 DPI)
E-4305L (300 DPI)
손쉬운 로딩
새롭게 고안된 장치로이해 라벨 및 리본 장착이 쉬워젔습니다.
강력한 제품, 재질
고강도 이중구조로 만들어져서 내구성이 뛰어납니다.
라벨 확인 창
작업자가 라벨프린터 작업 중 직접 라벨의 잔량 확인이 가능합니다.
액체로부터 보호
굳게 닫혀져 있는 E-Class 설계 덕분에 액체로부터 보호가 가능합니다.
리본 비용절감
1인치 지관의 리본 사용이 가능함으로 리본 비용 절감이 가능합니다.
더욱 큰 라벨 장착 가능
Professional Plus 모델에서는 보다 많은 라벨을 수용할 수 있습니다.
내장형 Fan Fold 기능
라벨을 먼지나 다른 이물질로부터 보호 합니다.
손쉬운 유지보수
프린터헤드 및 드라이브 롤러를 아주 쉽게 교체할 수 있습니다.
큰 화면 제공
현재 프린터기의 상태를 표시해 줍니다 (Professional 이상 가능)
적용분야
제조 산업:
자산관리
완제품 관리
에이전시 라벨출력
케이스 라벨
리테일:
아이템 라벨
선반 라벨
세일물품 라벨
반품물품 라벨
우체국 서비스:
선적라벨
택배이력 관리
배달이력 관리
BASIC MODEL : E-4204B (203dpi), E-4304B (300dpi)
The Basic model meets the needs of the most popular barcoding applications. USB and serial ports are included as standard features. Optional 300dpi, thermal transfer and label peeler are also available.
Printer type :
Direct thermal, Optional thermal transfer
Print length range : 0.375” - 99” (9.5mm - 2514mm)
Resolution : 203 dpi (8 dots/mm), Optional 300 dpi (12 dots/mm)
Communication Options : USB 2.0, Serial RS232
Dimensions : 8.01”w x 7.36”h x 11.10”d (203.5mm x187mm x 282mm)
Weight : 84 oz. (2.4 kg)
Speed : 4ips (101mm/s)
Maximum Print Width : 4.25” (108 mm) @ 203dpi (8 dots/mm); 4.16”(106 mm) @ 300dpi (12 dots/mm)
Maximum Internal Media Roll Capacity : 5.0” (127 mm) O.D.
Memory : 64MB Flash / 16MB DRAM
Power Source Options/Accessories :
Fitted Lower Enclosure for Power Converter (optional)
Fitted Lower Enclosure for Power Converter & Battery Pack (accessory)
Indicators/Display : Two Light Indicators with 3 Colors
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
싸이퍼랩 9700 윈도우즈 PDA (Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3), 산업용PDA는 혹독한 현장에 적합하도록 설계되었으며 2 배터리(옵션) 운영으로 24시간 운영이 가능합니다.
타사의 경쟁 모델보다 CPU 처리속도, 메모리, 배터리 방진, 방수등급 등이 우월하면서도 가격 경쟁력 또한 우수합니다.
다양한 스캔 엔진을 제공하며 현장에서 교체 가능하도록 설계되었습니다.
(1D, 2D 다중모드, 최대 15m 바코드 인식)
Extended Range Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 13.5˚ ± 0.7˚
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
Min. Distance : 2 in/ 5 cm (7.5 mil)
Max. Distance : 45 ft/ 9.1 m (100 mil retro-reflective)
Near/Far 2D Imager
Technology : Auto-focus 2D imager
Light source : Auto-adaptive illumination: 617 nm highly visible LEDs
Scan Angle : 14˚ (horizontal), 8.7˚ (vertical)
Print Contrast : Down to 40%
Ambient Lighting : From 0 to 100,000 lux
Min. Distance : 6 in/ 15 cm (10 mil)
Max. Distance : 50 ft/ 15 m (300mil)
Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 47˚±3˚(typical), 35˚±3˚(narrow)
Print Contrast : Minimum 20% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
DOF : 1 to 45 in. / 2.5 to 114.3 cm
2D Imager
Technology : 752 x 480 pixels
Light source : 625 ±5 nm LEDs
Scan Angle : 40˚ (horizontal), 25˚ (vertical)
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : Max 96,900 lux (sunlight)
DOF :
5 mil code39 1.4 in./5.3cm to 7.5 in./19.1 cm
100% UPC 1.6 in./4.1cm to 12 in./30.5cm
5 mil PDF417 2.8 in./7.1cm to 4.5 in./11.4cm
다양한 키패드 선택
30-Key 및 38-Key 뉴메릭 키패드와 각각 4개 및 10개의 기능키
특정 52-Key 알파 뉴메릭키로 VT220 / TN3270 / TN5250 시스템 터미널 에뮬레이션 제공
우연한 터치에 의한 키패드 입력 오류를 방지하기 위한 키간격 유지 및 인체공학적 디자인
유연하고 효율적인 무선통신 제공
CCXv4 인증 IEEE 802.11 a/b/g/n
Bluetooth® 통신 Class II, V2.1
Push-to-talk (무전기, 동보전송 기능)
장시간 사용을 위한 주요 대안
표준 3600 mAh 뱃더리 및 대용량 5400 mAh 뱃더리 제공
최소 13 시간 계속 운용 (20초당 1번 레이저 스캐닝시)
두가지 Windows® 플랫폼 지원
Window® CE 6.0
Windows® Embedded Handheld 6.5
Android 6.0 (모델 : 9700A)
블루투스 및 무선랜 지원거리
블루투스 : 가시거리내에서 50m 지원
802.11 b/g: 가시거리 내에서 300 m 지원
802.11 a: 가시거리 내에서 250 m 지원
PERFORMANCE
Operating system : Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3
CPU : TI OMAP 3730 1GHz
Memory : 4GB Nand FLASH / 512MB DDR SDRAM
Expansion : Micro SD slot with SDHC support
Operating power : Rechargeable 3.7V 3600 mAh / 5400 mAh Li-ion Battery
Working hours1 : 13 hours
Alert : 3 LED indicators (for RF, charging status and good reading) / Vibrator/ Speaker
Interface supported : USB, RS232
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
데이타맥스프린터 DATAMAX A-Class 열전사 RFID 바코드프린터엔진 오토라벨러엔진 매뉴얼HION IT
고성능 인쇄 및 응용 프로그램의 요구 사항이 기존 인쇄 엔진이 제공하는 것보다 많은 기능이 필요한 경우 새로운 Datamax A-Class ™로 이동할시기입니다.
A 클래스 모델 : A-4212, A-4310, A-4408, A-4606, A-6212, A-6310
데이타맥스 A-Class 고급 바코드 프린터 엔진 제품군에는 스테인레스 스틸 하드웨어 구성 요소, 모듈식 전자카드 케이지, 현장 설치형 열전사 리본 어셈블리, 원격제어 패널 및 전체 그래픽 디스플레이와 같은 혁신적인 디자인 기능이 많이 포함되어 있습니다.
애플리케이터 통합 인쇄 및 적용을 위해 설계된 A-Class는 산업 표준 통신 인터페이스에 대한 연결 옵션을 갖춘 Datamax I-Class 펌웨어 아키텍처를 사용합니다.
데이타맥스 A 클래스 RFID 옵션은 현재 64비트 또는 96비트 메모리가 있는 EPCglobal Class 1 태그를 수용합니다.
사양 및 요구 사항이 발전함에 따라 더 많은 태그 인코딩 기능이 추가됩니다.
Right-handed printer
Media peel bar
4MB FLASH downloadable program memory
16MB DRAM memory
Two RS-232 serial interfaces, 9pin
One IEEE 1284 compliant parallel interface
One USB v1.1 interface
RS422/RS485 Interface
One applicator interface ports (15pin) with programmable inputs and outputs
Graphics LCD control display with backlight
EFIGS (English, French, Italian, German, and Spanish) LCD languages
AGFA Scalable Font Engine with CG Triumvirate™ Scalable (regular and bold condensed) fonts
Industry standard bar code symbologies
Time and Date battery back up
Static brushes
Host Computer accessible RAM/Flash memory for object temporary storage
DPL command language
Slide in style card cage
Fault handling with reprint or void selection
Parse error-tolerant command language interpretation
Internal test labels for printhead verification, print quality validation, and internal configuration
Resident multiple setup store and restore capability
Time stamp at print capability
Paper retract control after print
Ribbon low detection and warning
Power up diagnostics
Resident option hardware diagnostics
Diagnostic display and modes
Media counters
Front panel security
Input line mode (ASCII text input) capability
Option hardware auto-detection
Scalable Font dynamic font attributes, bold and italics
Firmware upgrades downloadable
Audible Alert
A-CLASS OPTIONS
LEFT-HANDED VERSIONS
DIRECT THERMAL (no ribbon)
RIBBON SAVER
INTERNAL WIRELESS LAN (DMXrfNET)
INTERNAL ETHERNET LAN (DMXNET)
EXTERNAL ETHERNET LAN (DMX-100)
INTERNAL TWINAX/COAX INTERFACE
REMOTE FRONT PANEL DISPLAY
RFID (Encodes EPC Class 1 tags)
EXTERNAL KEYBOARD SUPPORT
8MB FLASH MAIN LOGIC BOARD
LINERLESS (Special Order)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Zebra의 혁신적인 ZXP 시리즈 8 재전사 (Retransfer) 카드프린터 계열과 Windows 인증 드라이버 및 ZMotif SDK 소프트웨어를 사용하여 필요할 때 완벽한 화질로 선명한 컬러 카드와 단색 카드를 즉석에서 발급하십시오. 이 재전사 카드프린터는 스마트 카드와 같이 표면에 요철부가 있는 카드 인쇄, 높은 이미지 품질이 요구되는 분야 또는 내구성 및 마모 내성이 개선된 카드 인쇄에 적합합니다.
혁신적인 재전사 (Retransfer) 인쇄 공정을 사용하는 지브라 ZXP 시리즈 8 은 일반 신분증 사진보다 광택이 많은 잡지 인쇄물처럼 보이는 영상과 그래픽으로 고품질 포토 ID 카드를 제작하는 데 필요한 최상의 인쇄 해상도를 동급 최고 속도로 제공합니다. 프린터에 모듈형 설계를 채택하고 있어 필요에 따라 다양한 인코딩 옵션을 유연하게 추가할 수 있습니다. 단면 또는 양면 코팅도 지원합니다.
탁월한 성능
ZXP 시리즈 8은 가로 모드로 이미지를 인쇄하는 특허 받은 양면 동시 전사 공정을 채택하여 동종 최고의 인쇄, 인코딩 및 코팅 성능을 제공함으로써 품질 저하 없이 처리량과 편평도를 향상시킵니다. Zebra의 이미지 처리 기술을 기반으로 브랜드 사양과 품질을 충족하는 사진 품질 컬러와 해상도를 얻을 수 있습니다. 이 시리즈는 내부와 외부를 모두 견고하게 설계하여 수리 비용이 절감되고 가동 중단 시간이 단축됩니다.
간편한 프린터 통합 및 관리
ZMotif XML 기반 드라이버와 SDK를 채택하여 간편한 설치 및 빠른 배포에 적합한 드라이버와 관리 유틸리티 도구를 갖춘 엔터프라이즈급 카드프린터 입니다. Microsoft® Windows® 인증 드라이버가 기존 소프트웨어 인프라에서 적용 호환성, 사용 용이성 및 투자 보호를 보장합니다. USB 및 이더넷 연결 인터페이스가 표준으로 제공되며, 지역 네트워크 또는 무선 시스템에 쉽게 통합되는 WiFi 옵션도 제공합니다.
보안 기능
ZXP 시리즈 8 에는 단면 또는 양면 코팅용 라미네이터 모듈 옵션 등 보안 강화에 유용한 많은 기능을 포함하고 있습니다. 전사 필름이 내장된 사기 방지 수단 조작 증거를 보여주며, 잠금형 케이스와 카드 공급기 옵션이 무단 사용을 방지할 수 있습니다. 이 시리즈에는 Kensington® 잠금장치 슬롯도 포함됩니다.
PRINTING
Dye sublimation retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
Photo quality image
Over-the-edge printing on standard CR80 media
* Print speed based on click to drop, average print coverage, with USB connectivity, card per hour (cph).
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card reject hopper (30 mil)
100 card output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows® certified drivers
Kensington physical lock capable
LAMINATOR SPECIFICATIONS
Single-or dual-sided lamination option (with dual-sided printer only)
180 cards per hour dual-sided printing and dual-sided lamination
GSA FIPS 201 approved (dual-sided lamination)
Uses Zebra True Secure i Series laminates only
Laminate for the top and bottom sold separately
Custom-coded laminates available
CARD SPECIFICATIONS
Card thickness: 30 ? 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite***
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)***
Technology cards: contact and contactless smart cards, UHF cards***
COMMUNICATIONS INTERFACES
USB V2.0
10/100 Ethernet (encoding over Ethernet requires ZBR PS-300 Ethernet-to-USB Device Server)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZXP 시리즈 7 열전사 단면인쇄 양면인쇄(옵션) 카드프린터 매뉴얼HION IT
지브라 ZXP7 시리즈 열전사 카드프린터로 대량발급 어플리케이션에서 사진과 유사한 품질의 카드를 인쇄합니다.
Zebra ZXP7 시리즈 카드프린터는 최신의 기술에 의해 대량으로 고품질의 카드를 빠르게 인쇄하며, 총 소유비용(TCO)을 낮춤으로써 사용자에게 뛰어난 가치를 제공합니다.
또한 정밀한 컬러 제어로 항상 선명한 카드를 인쇄합니다.
ZXP 시리즈 7 카드프린터는 혁신적인 디자인을 도입하였습니다.
지브라 ZXP 시리즈 7 카드프린터는 카드의 두께에 따라 자동으로 조정되고 간편하게 리본을 로딩할 수 있습니다.
색상으로 구분된 안내와 선명한 LCD 제어판으로 누구나 쉽게 사용할 수 있으며, 다양한 인코딩 및 연결 옵션 중에서 선택하면 됩니다.
그리고 특별한 보안 또는 내구성이 필요한 카드의 경우에는 폐기물 없는 단면/양면 라미네이트를 사용할 수 있습니다.
잠금 메카니즘은 프린터와 미디어를 보호하며 필요에 따라 소프트웨어로 작업을 추적하고 제한함으로써 보안을 더욱 강화할 수 있습니다.
성능 : 카드마다 필요한 방식으로 작동
ZXP 7 시리즈 카드프린터는 오늘날의 까다로운 비즈니스 니즈를 충족시킬 수 있도록 제작되었습니다.
광범위한 환경과 어플리케이션에서 바로 사용할 수 있는 강력한 디자인
사진 인쇄 기술을 적용하여 사진과 유사한 인쇄 품질 및 색의 농도 생성
풀전사(edge-to-edge)카드 인쇄
라미네이터로 카드의 보안 보장 및 이미지 수명 연장
생산성 : 빠른 속도와 간편한 유지보수
ZXP 7 시리즈 카드프린터는 빠른 인쇄 속도로 생산성을 향상시키고 대기 시간을 줄입니다:
빠른 click-to-drop 및 배치 인쇄 속도
최대 세가지 작업(인코딩, 인쇄, 라미네이팅)의 동시 처리로 가장 빠른 처리량 제공
보다 빠른 인쇄를 위해 개발된 ix Series™ 리본
양면 동시 라미네이팅
용이한 통합 및 간편한 유지보수가 가능합니다:
높은 미디어 용량
리본과 라미네이트 롤 사이즈 동일
리본 로딩 및 운영 간소화
Windows® 드라이버, ZMotif™SDK, 빠른 설치를 위한 네트워킹 옵션
적용성 : 현재 및 미래의 비즈니스 니즈 충족
ZXP 7 시리즈 카드프린터는 진정한 유연성을 제공합니다.
필요시 옵션을 구매하여 카드 인쇄 어플리케이션 포트폴리오 확장 및 투자 관리를 동시에 할 수 있습니다.
옵션 :
단면 또는 양면 인쇄
다양한 인코딩 및 연결 옵션
폐기물 없는 단면 또는 양면 라미네이트
물리적 보안 잠금 메커니즘
적용성 및 소프트웨어를 통한 제어:
ZXP Toolbox를 통해 프린터, 드라이버, 소프트웨어 설정에서부터 관리, 진단까지 고급 제어 기능 제공
고급 보안 기능으로 사용자별 기능 및 권한 설정에 필요한 관리 유연성 제공
소프트웨어 개발자는 ZMotif SDK를 사용하여 고급 기능의 간편한 통합 또는 맞춤형 인쇄 어플리케이션 개발 가능
비용 효율성 : 카드 당 비용을 최소화하도록 설계된 소모품
ZXP 7 시리즈 카드프린터는 Zebra True Colours® ix Series 리본과 Zebra True Secure™ i Series™ 라미네이트를 함께 사용하도록 설계되었습니다.
대용량 리본은 롤 당 더 많은 이미지를 제공함으로써 비용을 줄이고, 보다 빠른 속도로 고품질의 이미지를 인쇄할 수 있는 개선된 포뮬레이션을 자랑합니다.
대부분의 리본 타입은 모든 인쇄 업무의 니즈를 충족시키기 위해 두 가지 사이즈로 제공합니다.
Zebra True Secure 라미네이트는 카드 위조 위험을 줄이고 강력한 보안 카드의 수명을 연장시켜 줍니다.
독창적인 라미네이트 디자인은 라미네이트의 Carrier, Backing, Liner 를 제거함으로써 폐기물을 급격히 줄여 줍니다.
또한 특수 설계된 카트리지로 라미네이트를 간단하게 교체할 수 있습니다.
리본과 라미네이트 모두 지능형 미디어 기술을 활용하여 프린터를 자동으로 감지하고 보정합니다.
STANDARD FEATURES
300 dpi/11.8 dots per mm print resolution
USB 2.0 and Ethernet 10/100 connectivity
Microsoft® Windows Certified drivers
200-card capacity feeder (30 mil)
15-card reject hopper (30 mil)
100-card output hopper (30 mil)
Single-card feed capability
ix Series intelligent media technology
21-character x 6-line LCD operator display with configurable soft keys - Kensington® physical lock slot
Two-year unlimited warranty on printer and printhead
OPTIONAL FEATURES
Single-sided laminator
FIPS 201 compliant dual-sided laminator
Lockable enclosures and card feeder**
EXtended product warranty programs
802.11b/g wireless connectivity
1D barcode scanner
Duo-Print upgrade kit
NOTE: FIPS201 compliant dual-sided laminator is only for North America.
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11b/g wireless option
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
초고속으로 사진처럼 생생한 이미지 품질 구현
보안성이 뛰어난 애플리케이션 요구를 충족하도록 설계된 ZXP 시리즈 9™을 사용하면 사진 품질의 카드를 빠르고 안정적으로 생성 할 수 있습니다. 안정성을 자랑하는 ZXP 시리즈 9 카드프린터는 사진과 그래픽 인쇄에 적합하며 지브라의 Color Predictive Technology (색상 예측 기술)를 채택하고 있습니다. 이 기술은 지속적인 모니터링과 프린터 설정 즉시 적용을 통해 최고 수준의 품질을 자동으로 생성합니다. 본 재전사 프린터 제품은 스마트 카드와 같이 표면이 고르지 않은 경우에도 내구성이 뛰어난 풀전사 카드 제작이 가능합니다.
탁월한 인쇄 품질과 성능
ZXP 시리즈 9 재전사 카드프린터는 탁월한 품질과 안정성, 빠른 처리 속도, 더 많은 옵션과 귀중한 비용 및 시간 절감 효과를 제공합니다.
고품질 카드를 빠른 속도로 인쇄하며, 동급 최강의 재전사 및 라미네이트 기술로 강화된 보안을 보장합니다.
유연하고 간편한 작업
ZXP 시리즈 9 카드프린터를 통합 및 관리하는 데 필요한 도구를 제공하는 종합적인 소프트웨어 제품군을 사용하여 맞춤형 카드 디자인을 생성할 수 있습니다. 사용자 선택 가능 인쇄 품질 모드는 더 많은 옵션과 제어 기능을 제공합니다. 특허받은 Zebra의 양면 동시 재전사 인쇄 설계로 인쇄 도중 프린터가 카드를 기계적으로 뒤집을 필요가 없습니다. 이 기술 덕분에 기계적 오류나 카드 걸림 현상이 감소합니다. 그리고 Print Touch™ 및 QR 코드 기술이 즉석에서 관련 정보와 지원을 제공합니다.
보안 기능 추가
특수 홀로그램 라미네이트와 함께 암호화, 프린터 호스트 인증 등의 프린터 기반 보안 기능으로 보안을 한층 더 강화하고 불법 위조, 변조 및 복제를 방지할 수 있습니다. 지브라는 카드 위조 방지를 위해 전용 카드 보안 기능이 필요한 맞춤형 홀로그램 라미네이트를 지원합니다. ZXP 시리즈 9는 무단 사용을 방지하기 위한 카드 피더 및 인클로저와 함께 선택적으로 잠금 기능도 라미네이터에 탑재할 수 있습니다.
PRINTING
Dye diffusion retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
User-selectable print modes: standard and fine
Photo-quality images
Over-the-edge printing on standard CR80 media
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card capacity reject hopper (30 mil)
100 card capacity output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows certified drivers
Kensington physical lock capable
CARD SPECIFICATIONS
Card thickness: 30 - 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite**
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)**
Technology cards: contact and contactless smart cards, UHF cards**
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11 b/g wireless connectivity
ELECTRICAL
Auto-switching single-phase AC power
100V~240V AC and 50-60 Hz
PHYSICAL
Height (w/ card hoppers): 13.2”/334 mm
Width (w/ card hoppers): 18.75”/476 mm
Width (w/ card hoppers, w/ laminator): 30.75”/781 mm
Depth: 20.4”/519 mm
Weight (printer only): 27.5 lbs./12.5 kg
Weight (printer, laminator): 44 lbs./20 kg
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410RFID ZT420RFID 열전사감열 산업용 RFID프린터 매뉴얼HION IT
Zebra ZT400 시리즈 RFID 프린터 / 인코더는 혹독한 환경 속에서 안정적인 인쇄와 인코딩에 필요한 고급 기능을 제공합니다.
RFID 라벨링의 가격대비 성능을 선도하는 지브라의 ZT400 RFID 프린터는 여러 산업분야의 다양한 애플리케이션을 지원합니다.
지브라 ZT400 RFID는 RZ™ 시리즈보다 처리량 및 극한 환경에서 생산성을 향상시키는 견고한 금속 프레임을 특징으로합니다.
ZT400 시리즈는 4인치 ZT410 및 6인치 ZT420 은 0.6 "/ 16 mm의 작은 라벨을 인쇄 및 인코딩 할 수 있으며, 소형 라벨 애플리케이션에 대한 정확한 등록으로 최대 600 dpi를 인쇄 할 수 있습니다.
직렬, USB 2.0, 블루투스 및 10/100 이더넷 통신을 비롯한 다양한 표준연결 옵션은 물론 802.11 a / b / g / n 보안 무선 및 병렬 옵션도 제공합니다.
Integrated ThingMagic® RFID reader/encoder
RFID system is available as a factory- or field-installable option
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Adaptive encoding technology automatically eliminates complex RFID placement guidelines
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Auto-tag calibration for label lengths of 2” or greater
Optimised for throughput of both small and large labels
RFID job-monitoring tools track RFID performance
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
RFID ZPL® commands provide compatibility with existing Zebra RFID printers
RFID
Integrated RFID system is user-upgradable in the field
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Automatically eliminate complex RFID placement guidelines with adaptive encoding technology
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Track performance with RFID job-monitoring tools
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
Integrated ThingMagic® RFID reader/encoder
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory :
256 MB RAM memory (4 MB user available)
512 MB Flash memory (64 MB user available)
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm
Media Sensors : Dual media sensors: transmissive and reflective
Media Characteristics : Media web width (label and liner)
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410 ZT420 열전사감열 산업용 바코드프린터 매뉴얼HION IT
지브라프린터 ZM400 후속 모델로 지브라 ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 다양한 어플리케이션에서 장시간 사용이 가능 하도록 설계된 뛰어난 산업용프린터로 귀사의 중요 업무를 효율적으로 지원 할 것입니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 현장에서 입증된 Z Series의 신뢰성을 바탕으로 인쇄속도 인쇄품질 및 네트워크 연결 옵션을 더욱 개선하였습니다.
또한 사용자 편의성을 고려하여 디자인된 ZT400 시리즈 바코드프린터는 직관적인 아이콘 기반의 LCD 그래픽 사용자 인터페이스를 제공하며 소모품을 간편하게 장착할 수 있습니다.
통신연결은 USB, 직렬, 이더넷 및 블루투스 포트를 기본으로 제공하며, 확장된 RFID 기능은 더욱 강력한 추적 능력과 상세한 가시성을 제공합니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 4인치, 6인치 모델로 제공되며, 귀사의 바코드프린터 투자에 현재와 미래의 요구를 항상 충족시킬 수 있도록 광범위한 고급 기능을 표준으로 제공합니다.
외관은 전체가 금속 프레임과 접이식 도어로 구성되어 공간이 제한된 환경에 적합하도록 설계되었습니다.
강력한 멀티플렛폼 SDK (Software Development Kit)와 소프트웨어 어플리케이션이 결합된 혁신적 운영체제인 제브라의 Link-OS 환경을 통해 전세계 어디에서나 통합, 관리, 유지보수가 용이합니다.
ZT410
Maximum print width : 4 인치
Maximum ribbon length : 450 m
Maximum print speed ; 14 ips
User Interface : LCD
Print resolution : 203, 300, 600 dpi
Printer control language : ZPL, EPL, others
ZT420
Maximum print width : 6 인치
Maximum ribbon length : 450 m
Maximum print speed ; 12 ips
User Interface : LCD
Print resolution : 203 and 300 dpi
Printer control language : ZPL, EPL, others
어플리케이션 유연성
폭넓은 범위의 사용가능한 미디어와 미디어 배송 옵션으로 프린팅 준비성 확대
최종 사용자가 설치 가능한 미디어 핸들링 옵션으로 현재와 미래의 비지니스 요구에 맞게 프린터 커스터마이징 가능
직렬, USB, 이더넷 및 블루투스의 기본 제공 및 기타 연결 옵션을 위한 두개의 개방형 미디어 슬롯
설치 및 사용 용이성을 고려한 확장된 RFID 기능
고해상도 인쇄기능으로 소형 바코드라벨 어플리케이션에서 고품질의 결과물 보장
간편한 통합
USB 호스트 포트의 장착으로, 미러링을 통한 USB 플래시 드라이브 데이터의 간편한 전송과 확장된 매핑 드라이브 메모리 기능을 활용하여 간단한 프린터 설정 가능
Virtual Device 앱을 통해 ZPL 및 EPL 이외 주요 래거시 및 경쟁사 프린터 언어를 지원함으로 미래에 대비한 투자 가능
용이한 조작
Dynamic QR 코드로 프린터 오류의 신속한 해결을 위한 온디맨드, 웹 기반의 지원 제공
Print Touch 를 지원하는 Link-OS 프린터는 NFC(Near Field Communicatrion)를 사용하여 웹 페이지 실행, 사용법에 관한 동영상과 제품 지원에 관한 지브라의 광범위한 지식 기반에 편리하게 엑세스
미디어 및 리본 경로의 조명으로 어두운 환경에서도 프린터 내부 확인 용이
간단한 관리
지브라의 Link-OS 환경으로 어느 곳에서나 프린터의 모니터, 관리 및 유지보수가 가능한 진보된 기능 제공
Clould Connect를 이용하여 인쇄 및 기기 관리를 위한 Link-OS 지원 프린터와 클라우드의 안전하고 직접적인 상호 작용 가능
Profile Manager를 통해 전세계 어디에서든 단일 프린터, 복수의 프린터, 또는 네트워크상의 모든 Link-OS 지원 프린터를 편집 및 관리
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory : 256 MB SDRAM/ 512 MB on-board linear Flash memory
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm per second
Media Sensors : Dual media sensors - transmissive and reflective
Media Characteristics - Media web width (label and liner):
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT220 ZT230 열전사감열 산업용 바코드프린터 매뉴얼HION IT
S4M 바코드프린터의 장점을 바탕으로 고객으로부터의 다양한 의견 수렴을 통하여 출시된 새로운 ZT200 시리즈 바코드프린터는 우수한 공간 절약형 디자인, 손쉬운 설정, 직관적인 사용자 운영 그리고 편리한 서비스 및 유지보수 등의 특징을 가지고 있습니다.
ZT200 바코드프린터 시리즈는 바코드 기술의 신규 도입부터 기존 바코드프린터 모델의 업그레이드까지, 다양한 라벨링 어플리케이션에 적합한 탁월한 선택이며, 이 혁신적인이고 새로운 프린터는 많은 사용자에게 혜택을 제공할 것입니다.
지브라 ZT200 바코드프린터 시리즈는 효율적인 디자인과 작은 크기로 Stripe와 S4M 모델 보다 물리적 공간을 더욱 작게 차지하며 최소한의 운영자 교육, 주요 구성요소에 대해 공구가 필요없는 유지보수 서비스를 제공합니다.
또한 기존 시스템과의 완벽한 호환성을 제공하기에 IT 담당자는 다운타임을 최소화하면서 새로운 프린터를 운영할 수 있습니다.
ZT220
지브라의 가장 저렴한 탁상용 프린터
충격에 강하고 견고하여 오래 사용할 수 있는 폴리머 케이스
300m 리본 용량
사용자가 간단하게 사용할 수 있는 3개의 조작 버튼
바코드라벨의 교체가 빈번하게 발생하는 작업에 이상적입니다.
ZT230
견고한 금속 케이스로 오래 사용할 수 있습니다.
가동 시간을 늘리고 리본 교환 횟수를 줄이기 위한 450m 리본 용량
화면 표시 내용이 그래픽으로 처리되어 바코드프린터 설정 및 제어가 편리함
바코드라벨의 교체가 좀 더 빈번하게 발생하는 작업에 이상적입니다.
지브라 ZT200 바코드프린터 시리즈는 고객의 다양한 의견과 고객의 프린팅 어플리케이션, 진화하는 비즈니스 요구와 운영상의 문제점에 대한 이해를 바탕으로 설계된 최고의 제품으로, ZT200 시리즈는 동급 프린터에서 일반적으로 찾을 수 없는 탁월한 성능과 특징을 제공합니다.
공간 절약형 디자인
제한된 좁은 공간에 적합한 작은 설치 공간과 효율적인 설계
업무 공간을 최대화하며 좁은 공간에도 적합한 독특한 접이식 도어의 공간 절약형 디자인(개방 공간 102mm/4” 필요)
빠른 설치 및 통합
구형 Stripe 및 S4M 모델의 완벽한 후속 모델
다중 연결 옵션: 병렬, 10/100 이더넷, 802.11b/g/n 무선
아이콘 기반의 상태 LED로 프린터 상태를 쉽고 즉각적으로 파악
직관적이고 손쉬운 미디어 장착
복잡한 소모품 장착을 간소화하는 측면 장착 디자인
처음 사용자도 리본 및 미디어를 장착할 수 있도록 색깔로 표현된 시각적 안내 제공
미디어를 통해 보이는 발광형 이동식 센서로 간단하게 센서 위치 조정
인쇄 품질
미세 조정으로 더 나은 인쇄 정확도를 보장하도록 제작
선명하고 깔끔한 텍스트 및 바코드 - 좁은 미디어에서도 가능
Zebra 신뢰성과 내구성
경공업 및 상업 환경에 적합하도록 제작
Energy Star® 인증
최소한의 유지보수로 최적의 성능을 제공하도록 설계된 드라이브 시스템
간소화된 사용성
플래턴과 프린트헤드를 도구없이 쉽게 제거함으로써 간단히 청소와 교체 가능
손쉽게 교체 가능한 연결 옵션으로 신속한 프린터 교체 및 업그레이드 가능
일반적인 도구 3개로 기본 서비스 가능
PRINTER SPECIFICATIONS
Resolution ;
8 dots per mm/203dpi
12 dots per mm/300dpi (optional)
Memory : Standard / 128MB flash (58MB user-available), 128MB DRAM
Print width ;
104mm/4.09"
Minimum: 0.75"/19.4mm
Print speed : 152mm/6" per second
Media sensors : Transmissive and reflective sensors
Media characteristics ;
Maximum label and liner width : 114mm/4.5"
Maximum non-continuous label length : 991mm/39"
Media width : 19.4mm/0.75" to 114mm/4.50"
Print length ;
203dpi : 3,988mm/157"
300dpi : 1,854mm/73"
Maximum media roll size ;
203mm/8.0" O.D on a 76mm/3.0" I.D. core
152mm/6.0" O.D. on a 25mm/1.0" I.D. core
Media thickness : 0.076mm/0.003" to 0.25mm/0.010"
Media types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZE500시리즈 열전사감열 RFID프린터엔진 오토라벨러엔진 바코드프린터엔진 매뉴얼HION IT
지브라의 새로운 ZE500™ 시리즈는 OEM 바코드 인쇄 엔진에 대한 혁신적인 접근 방식을 채택했습니다.
Zebra ZE500 시리즈 바코드 프린터 엔진은 광범위한 설문 조사를 활용하여 디자인, 사용 편의성, 서비스 및 통합 용이성에 중점을 두고 중요한 자동라벨링 업무에 중단없이 작동하도록 설계되었습니다.
우아한 디자인의 ZE500 바코드 프린터 엔진은 유지 보수를 단순화하고 유지 보수에 대한 가동 중단 시간을 획기적으로 줄여주며 3개의 롤러는 모두 프린터의 전자 장치에 접근할 필요없이 수 분 만에 교환 할 수 있습니다.
와이드 오픈 프린트 헤드는 청소 및 교체를 단순하게하며 퀵 체인지 모듈 식 드라이브 시스템은 프린터 수리 시간을 줄입니다.
확장된 RFID 기능은 보다 향상된 추적 성능을 제공하여 운영 효율성을 향상시킵니다.
리본 교체와 같은 일상적인 작업은 매우 간단합니다 (두 인쇄 폭 모두 동일).
새로운 그래픽 LCD 디스플레이는 장치에서 분리할 수 있으며 사용 편의성을 위해 응용 프로그램에 적합한 위치에 재배치 할 수 있습니다.
인쇄 및 적용할 기계와 쉽게 통합할 수 있으며 먼지와 물에 대한 내성이 뛰어납니다.
확장된 연결 포트 및 어플리케이터 포트의 향상된 소프트웨어 제어 기능은 통합 유연성을 한층 향상시킵니다.
Resolution: 203 dpi (8 dots per mm); 300 dpi (12 dots per mm)
Rotatable front panel display (0,180)
16MB SDRAM memory, 64MB Flash Memory
Available in right and left hand configurations
ZebraNet 10/100 Print Server (Internal)
Embedded ZebraLink WebView™and Alert features
Real Time Clock
Applicator interface - provides status and control signals for applicators
Communications via serial RS-232, IEEE 1284 bidirectional parallel interface with auto detect, and USB 2.0 port
Full function graphic front panel & large multilingual back-lit LCD display with user programmable password protection
Thin film print head with E3® Element Energy Equalizer
Dual media sensors, transmissive and reflective, selectable through software or front panel
ZPL® or ZPL II® programming language, selectable through software or front panel
XML-Enabled Printing ? allows XML communications from today's enterprise systems for barcode label printing
32 bit 133 MHz RISC processor
Zebra printer driver for Windows 7, XP, Vista, 2008, and 2003 operating systems
Advanced media counters
PRINTER SPECIFICATIONS
ZE500-4™ :
Maximum print width : 4.1”/104 mm
Media specification :
Label and liner width: 0.625”/16 mm to 4.5”/ 114 mm
Minimum length with back feed: 0.5”/13 mm
Minimum length without back feed: 0.25”/6.5 mm
Minimum length in stream mode: 0.25”/6.5 mm
Maximum length: 39”/990 mm
Maximum continuous media print length: 150”/3,810 mm
Ribbon width: 1”/25.4 mm to 4.2”/107 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed : 12”/305 mm per second (203 and 300 dpi)
ZE500-6™ :
Maximum print width : 6.6”/168 mm
Media specification
Label and liner width : 3”/76 mm to 7.1”/180 mm
Minimum length with back feed : 3”/76 mm
Minimum length without back feed : 1”/25.4 mm
Minimum length in stream mode : 1”/25.4 mm
Maximum length : 39”/990 mm
Maximum continuous media print length : 150”/3,810 mm
Ribbon width : 3”/76 mm to 7.1”/180 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed
12”/305 mm per second (203 dpi)
10”/254 mm per second (300 dpi)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
고객의 니즈를 충족시키는 고성능 옵션의 지브라 G 시리즈™ GX™ 및 ZD500™ 데스크탑 바코드프린터는 가장 빠른 인쇄 속도와 함께 이더넷, LCD 화면, 무선 또는 블루투스를 비롯한 다양한 첨단 기능 및 옵션을 제공합니다.
확장된 미디어 처리 기능으로 Peel & Present와 라벨, 영수증 및 태그에 적합한 정밀 커터, 라이너리스 라벨 등을 제공합니다.
지브라 GX™ 시리즈 및 ZD500™ 고성능 바코드프린터는 지브라 데스크탑 바코드프린터 제품군 중에서 가장 빠른 인쇄 속도와 완벽한 기능 세트를 제공합니다.
혁신적인 라벨, 영수증 및 태그 처리 기능을 갖추고 있어 필요한 유연성을 얻을 수 있습니다.
최상의 인쇄 품질과 다양한 연결 옵션을 제공하는 GX420™, GX430™ 및 ZD500 프린터는 다양한 애플리케이션을 지원하고 거의 모든 환경에 통합 가능하기 때문에 사용자가 효율과 수익을 높이고 시간을 절약하여 작업자 교육을 최소화할 수 있습니다.
고해상도의 인쇄 품질, 4개의 연결 옵션을 제공하는 ZD500 프린터는 컴팩트하며 최고의 성능에 필요한 기능들을 탑재한 프린터입니다.
어디에서든지 손쉽게 통합, 관리 및 유지보수할 수 있는 Link-OS 지원 프린터입니다.
감열 또는 열전사 모드로 작동합니다.
포함된 기능
지브라의 고성능 데스크탑 바코드프린터는 향상된 효율성과 생산성을 위해 동급 최고의 인쇄 속도와 기능을 제공합니다.
각 모델은 다양한 연결 옵션과 ZPL® 및 EPL™(GX 모델만 해당) 프로그래밍 언어로 손쉬운 업그레이드 및 통합을 제공하고 총 소유비용(TCO)을 절감할 수 있는 ENERGY STAR™ 인증 프린터입니다.
애플리케이션 유연성을 극대화해주는 강력한 기능
확장된 미디어 핸들링 옵션으로 Peel & Present와 라벨, 영수증 및 태그, 라이너리스 라벨에 적합한 Cutter 등을 제공합니다.
블루투스와 WiFi를 포함한 다양한 연결 옵션. LCD 디스플레이(옵션)를 통해 프린터 설정을 변경할 수 있습니다.
특정 요구에 맞도록 구성 가능
감열 또는 열전사 모델로 제공되는 이들 소형 바코드프린터는 직관적인 디자인과 다양한 연결 옵션을 갖추고 있습니다.
GX430과 ZD500 프린터 모두 300 dpi 고해상도 인쇄가 가능하므로 텍스트와 그래픽으로 구성된 소형 바코드라벨 인쇄에 적합합니다.
PRINTER FEATURE
Print methods : Thermal Transfer and Direct Thermal
ZPL programming language
EPL programming language (GX model only)
Dual-wall frame construction
Tool-less printhead and platen replacement
Open ACDESS for easy media loading
Quick and easy ribbon loading
Simplified calibration of media
ENERGY STAR qualified
PRINTER SPECIFICATIONS
Resolution :
203 dpi/ 8 dots/mm per mm
300 dpi/ 12 dots/mm per mm (optional on ZD500)
Memory:
128 MB Std SDRAM memory (4 MB available to user)
256 MB Std Flash memory (56 MB available to user)
Real time clock
Maximun Print Width : 4.09"/ 104 mm
Maximun Print Length : 39.0"/ 990 mm
Maximun Print Speed :
6"/152 mm per second (203 dpi)
4"/102 mm per second (300 dpi)
Media Sensors : Multi-position transmissive and adjustable reflective sensor
MEDIA CHARACTERISTICS
Label and Liner Length :
Maximum non-continuous : 39"/ 990 mm
Maximum using tear off mode : .25" (6.3 mm)
Minimum with label present sensor used : 0.5"/ 12.7 mm
Minimum with cutter : 1.0"/ 25.4 mm
Label and Liner Width : 0.75"/ 19 mm - 4.25"/ 108mm
Media Roll Size :
Maximum outside diameter : 5"/127 mm
Core inner diameter : 0.5"/ 12.7 mm, 1.0"/25 mm, 1.375"/ 35 mm, 1.5"/37.1 mm, 3"/ 76mm
Media Thickness : .003"/0.08 mm to .012"/ 0.305 mm
Media type : Roll-fed or fan-fed, dia-cut or continuous direct thermal label with or wothout black tag, stock, continuous receipt paper, wristbands
Ribbon charcateristics :
Outside diameter : 1.36"/ 35 mm
Standard length : 244"/ 74 m
Ratio : 1:1 media to roll to ribbon
width : 1.33"/ 33.8 mm to 4.3"/ 109.2 mm
Core inner diameter : 0.5"/ 12.7 mm
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 QLn 시리즈 모바일 프린터의 확장인 QLn220 ™ 및 QLn320 ™ 헬스케어 프린터는 의료 시설의 요구에 맞게 특별히 설계되었습니다.
지브라 헬스케어 모바일 프린터는 세균으로 부터 환자를 보호하기 위해 내구성이 높고 소독이 가능한 재료를 사용하여 제작되었습니다.
특히 의료용으로 개발된 Zebra의 QLn 시리즈 프린터를 사용하면 다음과 같은 업무를 지원합니다.
병원 침상 옆의 표본을 모으고, 수집 및 관련 레이블을 만들 수 있습니다.
Zebra의 Link-OS® 환경으로 모든 인쇄 장치를 가상으로 관리, 유지 보수 및 업그레이드 할 수 있습니다.
프로파일 관리자 응용프로그램을 사용하여 프린터 구성을 제어하고 형식 출력 및 인쇄물의 일관성을 유지합니다.
서비스 요청 감소
CLSI (Clinical and Laboratory Standards Institute®) 표준을 만족하는 라벨 인쇄
STANDARD FEATURES
Includes disinfectant-ready plastics in a lighter healthcare color scheme
Apple® iOS, Android, Windows Mobile and BlackBerry® connectivity
Direct thermal printing of barcodes, text and graphics
CPCL, EPL™ and ZPL® programming languages
256 MB Flash supports downloadable programs, receipt formats, fonts and graphics (64 MB available for user storage)
2450 mAh (nominal) 18.1 Wh removable, rechargeable Li-Ion battery
Built-in battery charger
IEC 60601-certified AC adapter for medical environments
Serial and USB ports (both support strain relief)
Belt clip for unobtrusive and convenient printing (not compatible with extended capacity battery)
Black mark and gap media sensing using fixed center position sensors
Easy-to-use peel and present mode
Label present sensor for issuing labels one at a time
Tear bar for easy media dispensing
Center-loading media locking for variable roll widths
“Clamshell” design for easy media loading
Management: Mirror, SNMP, Web server, Profile Manager, AirWatch® and Wavelink Avalanche®
Large, easy-to-read LCD control panel (240 x 128 pixels)
LCD can be customized using WML (text and icons)
5-way navigation buttons, two software defined keys
Printer alerts on the display, help menus
Tolerance of multiple drops from 5’/1.52 m to concrete
IP43 dust- and water-resistance rating (IP54 with soft case)
400 MHz 32-bit ARM processor
XML support
Supports vertical and horizontal printing
Printers can be used in any orientation
QR barcode links to web-based help pages
Zebra Print Touch simplifies Bluetooth pairing and launches web-based help pages with Near Field Communication (NFC) enabled devices
Label odometer
Real-time clock
PRINTER SPECIFICATIONS
Resolution : 203 dpi/8 dots per mm
Memory : 128 MB RAM; 256 MB Flash (standard)
Print Width : 1.9”/48 mm
Print Length : Min: 0.5”/12.7 mm, Max: 32”/813 mm
Print Speed : Up to 4”/102 mm per second
Media Sensors : Black mark and gap media sensing using fixed center position sensors; label present sensor for issuing labels one at a time
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 MP6000, 2D 고정식 바코드스캐너는 거의 모든 인쇄 또는 휴대폰, 태블릿PC 화면의 1D 또는 2D 바코드를 사실상 놀라운 속도로 모든 상황에서 캡처 할 수 있습니다.
놀라운 스캔 성능
지브라의 업계에서 입증된 선도적인 이미징 기술을 사용하면 오늘날 사용 가능한 어떤 레이저 바이옵틱 스캐너보다 빠른 속도로 바코드를 스캔할 수 있습니다.
각종 바코드 캡처
어떤 종류의 1D 및 2D 바코드라도 자동으로 판독/평가할 수 있습니다.
종이 라벨에 인쇄되어 손상되었든, 플라스틱 고객카드나 기프트카드에 인쇄되어 있든, 휴대전화 화면에 표시되어 있든 상관 없습니다.
탁월한 신뢰성, 비용 및 총소유비용(TCO) 절감
고장 및 유지 관리 비용을 최소화할 수 있습니다. 스캔 엔진에 작동 부품이 없으므로 전력 소비량이 최소 30% 감소하고 정전용량형 버튼도 마모되는 일이 없습니다.
매장 및 고객 요구 사항에 맞게 맞춤 가능
6개 포트가 있으므로 스케일, 고객이 휴대전화나 고객카드의 바코드를 스캔할 수 있는 고객 스캐너(Customer Side Scanner), 핸드헬드 스캐너, EAS 기기 등과 같은 새로운 기능을 손쉽게 추가할 수 있을 뿐만 아니라, RFID와 같은 미래의 요구 사항에 맞게 확장도 가능합니다.
탁월한 관리 기능
보완적 관리 소프트웨어를 사용하면 스캐너, 스케일, 연결된 모든 주변 기기를 비롯해 전체 스캐너 솔루션을 원격으로 관리할 수 있습니다.
사파이어 유리
수평 스캔 창에 업계 최고의 유리를 사용하여 긁히지 않고 마모나 훼손에도 취약하지 않습니다.
통합 EAS 지원
현재 사용 중인 Checkpoint® 또는 Sensormatic® 시스템을 지원하므로 업그레이드하느라 별도의 시간 및 비용이 들지 않습니다.
초 저소음
레이저 스캐너와 달리 모터 소음이 없는 MP6000은 매우 조용하여 POS 환경을 개선시켜 줍니다.
사용 편의성
전방향 스캔 및 6면 720° 커버리지 영역을 지원하므로 신속하게 스캔하고 정확하게 계산을 마칠 수 있습니다.
고객측 스캐너(옵션)
고객이 자신의 고객카드, 쿠폰, 충동 구매 품목 및 휴대전화에 표시된 바코드를 동시에 스캔할 수 있습니다.
손쉬운 설치
기존 계산대에 잘 맞습니다.
3개의 프로그래밍 버튼
푸시버튼을 사용해 광범위한 POS 프로세스를 간소화하여 처리량을 향상시켜 줍니다.
PHYSICAL CHARACTERISTICS
Dimensions :
Long scanner and scanner/scale :
20 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 507 mm L x 292 mm W x 102 mm D x 128 mm H
Medium scanner and scanner/scale : 15.7 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 399 mm L x 292 mm W x 102 mm D x 128 mm H
Short scanner : 13.9 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 353 mm L x 292 mm W x 102 mm D x 128 mm H
Weight :
Long scanner : 15.2 lb./6.9 kg
Long scanner/scale : 18.3 lb./8.3 kg
Medium scanner : 13.0 lb./5.9 kg
Medium scanner/scale : 16.2 lb./7.4 kg
Short scanner : 12.0 lb/5.4 kg
Scale :
30 lb. in 0.01 lb. increments/15 kg in 5 g increments
Maximum static weight: 300 lb./136 kg
Scale can be added after scanner installation (most countries)
Single-cable and dual-cable protocols
Compatible with Mettler and Bizerba price computational scales
Options :
0-12 lb. in 0.005 lb. increments and 12-30 lb. in 0.01 lb. increments
0-6 kg in 2 g increments and 6-15 kg in 5 g increments
Single-head and dual head remote scale displays
Dual heads rotate throug 290° for widest viewing angles on the market
Horizontal Glass : Sapphire; integrated Produce Lift Bar
User Interface :
Soft touch capacitive pads (no buttons to break or wear out)
Wide, centrally located two-color decode/ information bar (clear for cashiers and self-checkout users)
Beeper: adjustable volume and beep tones
Three programmable buttons
Ports :
One shared POS port for USB/RS-232/ IBM RS-485
Three USB peripheral ports
Two powered RS-232 peripheral ports
Checkpoint interlock port
Remote scale display port
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC70 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC70 / TC75 산업용 PDA는 처음부터 기업용으로 제작된 전문가용 안드로이드 디바이스입니다.
업무를 효율적으로 처리하고 고객에게 향상된 서비스를 제공하려면 지속적인 통신과 정보 액세스가 가능한 엔터프라이즈급 핸드헬드 컴퓨터가 필요합니다.
그러나 직원들은 일반 소비자 기기와 같이 세련되고 사용하기 쉬운 장치를 원합니다.
지브라 TC70 바코드 PDA는 이 두 가지 요구를 모두 충족시킬 수 있습니다.
Mobility Extensions(Mx)는 AndroidTM 를 진정한 의미의 엔터프라이즈급 운영체제로 만들어줍니다.
Zebra TC70 안드로이드 기반의 산업용 PDA는 견고한 디자인으로 가장 까다로운 환경에서도 안정적으로 사용할 수 있으며 양방향 무전기로도 활용할 수 있습니다.
내장 스캐너와 카메라를 사용하면 어떠한 유형의 비즈니스 인텔리전스도 자동으로 캡처할 수 있습니다.
완벽한 액세서리 및 최신 기술 구성으로 현재뿐 아니라 미래 비즈니스까지 지원할 수 있으므로 높은 투자 수익률을 기대할 수 있습니다.
지브라 TC70은 소매, 제조 및 영업 분야에서 고객에게 보다 나은 서비스를 제공할 수 있습니다.
실질적인 경쟁 우위를 확보할 수 있습니다.
Mobility Extensions(Mx) 및 Mobility DNA와 함께 기업용으로 강화된 Android KitKat
모든 TC70/ TC75 산업용 PDA에는 안드로이드를 소비자급 운영 체제(OS)에서 진정한 엔터프라이즈급 OS로 변신시켜주는 Mobility Extensions(Mx)가 함께 제공되며, 엔터프라이즈급 보안과 장치 관리가 가능하고 엔터프라이즈급 데이터 캡처 기능을 지원합니다.
완벽한 성능뿐 아니라 간편한 Mobility DNA로 모빌리티 효율성을 향상시킵니다.
이 모빌리티 솔루션은 Zebra 모바일 기기에 통합된 상용, 최종 사용자 앱, 강력한 관리 유틸리티 및 간편한 앱 개발 도구를 기반으로 가장 빠르고 간편한 모바일 성능을 지원합니다.
데이터 입력 유연성을 극대화 하기위한 업계 최고의 듀얼 모드 터치 패널
맨 손가락 및 장갑 낀 손가락 또는 맨 손가락 및 스타일러스 등 선호하는 데이터 입력 모드를 선택할 수 있어, 선명한 서명 캡처에 이상적입니다.
데이터 입력 방법을 전환할 때마다 설정을 조정해야 하는 경쟁사 장치와는 달리, 이 지능형 4.7인치 디스플레이는 필요에 따라 자동으로 조절됩니다.
업계 최고의 포괄적인 오디오 기능으로 새로운 차원의 음성 유연성 지원
대중적인 스마트폰의 음량을 최대 4배까지 증폭하고 소음 제거 기술을 제공하는 TC70/ TC75 PDA는 모든 통화마다 양쪽 사용자에게 깨끗한 오디오 품질을 선사합니다.
Workforce Connect PTT(Push-to-Talk) Express 및 Pro 지원으로 현장에서 동료와 빠르게 연결될 수 있으며 관리자 및 다른 사무 지원 인력과의 협업을 통해 고객 요구에 신속하게 대응할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 6.3 in. L x 3.3 in. W x 1.1 in. D/ 161 mm L x 84 mm W x 28 mm D
Weight : 13.3 oz./376 g
Display : 4.7 in. High Definition (1280 x 720); exceptionally bright, outdoor viewable; optically bonded to touch panel
Imager Window : Corning Gorilla Glass 2
Touchpanel : Dual mode capacitive touch with stylus or bare or gloved fingertip input (conductive stylus sold separately); Corning Gorilla Glass 2
Backlight : LED backlight
Power : PowerPrecision: Li-Ion 3.7 V, 4620 mAh
Expansion Slot : User accessible 32 GB microSD slot with SDHC and SDXC support
Network Connections : USB 2.0 High Speed (host and client); WLAN
Notification : Audible tone; multi-color LEDs; vibration
Keypad : On-screen keypad
Voice and Audio : Three microphone support with noise cancellation; vibrate alert; speaker; Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU : 1.7 GHz dual core processor
Operating System : AndroidTM AOSP 4.4.2 (KitKat)
Memory : 1 GB RAM / 8 GB Flash pSLC
WIRELESS PAN
Bluetooth Bluetooth v4.0 (Bluetooth® Smart technology)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC55 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC55 산업용PDA를 통해 효율성과 고객 서비스 개선 작업을 처리하려면 작업자에게 실시간 데이터에 대한 안전하고, 신뢰할 수 있는 원격 액세스가 필요합니다.
개인용 스마트폰, 태블릿PC 및 랩톱은 매력적이고 사용하기 쉽지만 매일 비즈니스에 사용하는 데 필요한 내구성 또는 기능성이 떨어지는 문제가 있기 때문에 포켓 크기의 지브라 TC55 산업용 PDA는 이와 같은 걱정이 없습니다.
Zebra TC55 산업용 PDA는 자주 사용되는 개인용 기기의 최근 기술에, 세련된 디자인, 사용 편의성을 바탕으로 하지만 소비자용 모델과 달리 TC55에는 데이터 캡처 기능이 통합되어 있습니다.
TC55 바코드 PDA는 산업 환경에서의 마모를 견디도록 제작되었기 때문에 현장에서 고장이 발생할 가능성이 적습니다.
기업 환경의 일상적인 업무용으로 제작
지브라 TC55 바코드 DPA는 오랜 내구성을 제공하는 기능들을 갖추고 있습니다.
낙하 및 충격 사양, IP67 밀봉 및 Corning Gorilla Glass 2 디스플레이로 인해 낙하 및 유출 시에도 안정적인 작동이 보장되어 평균 수명 3년을 쉽게 달성할 수 있습니다.
최대 데이터 입력 유연성을 갖춘 업계 최고의 이중 모드 터치 패널
원하는 데이터 입력 모드를 손가락(두꺼운 장갑 착용 유무에 상관없음)또는 서명 캡처용 스타일러스 중에서 선택할 수 있습니다.
전력 소비가 적지만 매우 밝은 4.3인치로 정전식 터치 환경의 수준을 한 차원 높여줍니다.
지브라 TC55 모바일 컴퓨터는 또한 습기가 있는 상태에서도 작동하는 WVGA 디스플레이를 제공합니다.
데이터를 자동으로 캡처하고 전체 문서를 처리합니다.
SimulScan Document Capture를 통해 작업자가 하나의 버튼만 누르면 바코드, 텍스트 필드, 전화 번호, 이미지, 서명 및 확인란을 캡처할 수 있습니다. 즉, 송장 및 주문 처리 속도가 향상됩니다.
기업용 안드로이드
모든 지브라 TC55 산업용 PDA에는 소비자 운영체제의 AndroidTM 를 더욱 강화된 기업용 운영체제로 탈바꿈시킬 수 있는 다양한 기능을 제공하는 Mobility Extensions (Mx)가 기본으로 탑재되어 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions (with standard battery) : 5.4 in. L x 2.7 in. W x 0.63 in. D/ 137 mm L x 69 mm W x 15.9 mm D
Weight With standard battery : 7.8 oz./220 g
Display : Blanview® LCD display, 4.3 in. WVGA, exceptional low power consumption, exceptionally bright image with 700 NITs, 3% transflective, Corning Gorilla Glass 3
Camera/Imager Exit Windows : Corning Gorilla Glass 3
Touchpanel : Dual mode capacitive touch with stylus or fingertip (bare or gloved) input
Backlight : LED backlight
Power :
PowerPrecision Li-Ion batteries
Two options: Extented 1.5x 4410 mAh or Standard Capacity 2940 mAh battery
Expansion Slot : User accessible 32 GB microSD slot with SDHC support
Network Connections : USB 2.0 High Speed (host and client), WLAN, WWAN and Bluetooth
Notification : Vibrate and audible tone
Keypad : On-screen keypad
Voice and Audio : 2 front facing speakers; dual noise-cancelling microphones; high-quality speaker phone; 3.5mm headset jack , Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU ; 1.5 GHz dual core processor
Operating System : Android 4.1.2
Memory : 1 GB RAM / 8 GB Flash MLC
USER ENVIRONMENT
Operating Temp. : 14°F to 122°F/-10°C to 50°C
Storage Temp. : -40°F to 158°F/-40°C to 70°C
Humidity : 5% to 85% non-condensing
Drop Specification ; 4 ft./1.2 m drop to plywood per MIL-STD 810G; With protective boot: 5 ft./1.5m to concrete at room temperature
Tumble Specification :
300 1.6 ft/0.5 m tumbles;
With protective boot: 1000 1.5ft./0.5 m tumbles; meets and exceeds IEC tumble
Thermal Shock : -40°F to 158°F/-40°C to 70°C rapid transition
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Zebra의 산업용 PDA MC9500-K는 혁신적인 인체공학적 디자인과 기능을 결합하여 아무리 까다로운 현장에서도 모빌리티 애플리케이션을 지원함으로써 고급 러그드 모바일 컴퓨팅의 기대 수준을 높였으며, 지브라만의 혁신적인 이 기기는 외양만큼이나 내부도 다릅니다.
지브라 테크놀로지를 대표하는 MC9000 바코드 PDA 시리즈를 기반으로 한 MC9500-K 는 더 견고한 설계, 더 많은 데이터 캡처 옵션, 고객이 전환할 수 있는 WAN 서브 시스템과 키패드를 통한 진정한 WAN 기술 독립성 및 애플리케이션 유연성, 더 강력한 프로세싱 성능, 배터리 및 백룸 관리에 대한 획기적인 방식을 제공하면서도 더 가볍고 날렵하며 사용하기에 간편한 외관을 갖추고 있습니다.
차세대 인체공학적 디자인
지브라 산업용PDA MC9500-K의 작고 날렵하며 손에 쥐기 편한 외관은 새로운 차원의 편의성을 제공하며 키 기반 애플리케이션을 한 손으로 쉽게 조작할 수 있습니다. 고급 LCD 기술이 적용된 동급 최고의 디스플레이로 인해 어떤 조명 조건에서도 간편하게 볼 수 있습니다.
통신업체로부터의 진정한 독립을 가능케 하는 Zebra MAX FlexWAN
백룸에서 WAN 서브시스템을 원하는 대로 바꿀 수 있어 통신업체로부터의 진정한 독립을 가능케 하는 최초의 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능은 WAN을 채택하고 필요에 따라 셀룰러 네트워크를 변경할 수 있는 유연성을 제공함으로써 전체 작업자의 통신 범위를 최적화하고, 서로 다른 네트워크에서 재배포를 가능케하고, 라이프사이클을 연장하고, 기기 사용률을 개선합니다.
Zebra MAX 키패드
백룸에서 몇 분 내에 키패드를 바꿀 수 있는 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능을 통해 MC9500-K를 손쉽게 맞춤화할 수 있어, 기기를 간편하게 업그레이드하여 업데이트되거나 새로운 애플리케이션의 요구를 충족할 수 있습니다. 또한 키패드 교체를 위해 기기를 정비 센터에 반환할 필요가 없으므로 가동 시간이 개선됩니다.
PHYSICAL CHARACTERISTICE
Dimensions : 9.2 in. H x 3.5 in. W x 2 in. D (23.36 cm H x 8.89 cm W x 5.08 cm D)
Weight : 22 oz./623 g (including battery, stylus, keypad & strap)
Display : 3.7 in. VGA Color (TFT) Display (640 x 480) with touch panel and backlight
Keypad Options : Modular: alpha primary; numeric telephony, numeric calculator, alpha numeric
Expansion Slot : microSD slot - supports up to 32 GB
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 806 MHz
Operating System : All models except MC959B: Windows Mobile 6.5
Memory : 256MB RAM/1GB Flash
BATTERY
Capacity : Rechargeable Lithium Ion 4800 mAh battery @ 3.7V – with State of Charge and State of Health indicators
Standby Time : 150 hours
Talk Time : 8 hours (minimum/suspend mode)
DATA CAPTURE
Scanning : 1D Scanner; 2D Imager; 3 MP auto-focus flashenabled digital color camera with symbology decode software
Scan Angle : Optimized for scanning (15° downward angle)
Options : Integrated Magnetic Stripe Reader (MSR) with encrypted head (optional)
COLOR CAMERA
Resolution : 3 megapixel
Illumination : User controllable flash
Lens : Autofocus
1D LASER SCANNER (SE950)
Range on 100% UCPA : 24 in./60 cm
Resolution : 4 Mil minimum element width
Roll : ±35° from vertical
Pitch Angle : ±65° from normal
Skew Tolerance : ±50° from normal
Ambient Light Immunity : LED: 450 Ft Candles (4,844 Lux), Sunlight: 8000 Ft Candles (86,111 Lux)
Scan Rate : 104 (±12) scans/sec (bi-directional)
Scan Angle : 47° ±3° default; 35° ±3° reduced
2D IMAGER (SE4500SR)
Focal Distance : From center of exit window: SR – 7.5 in./19 cm
Sensor Resolution : 752 x 480 pixels
Field of View Horizontal : 40°; Vertical: 25°
Skew Tolerance : ±60°
Pitch Tolerance : ±60°
Roll Tolerance : 360°
Ambient Light Immunity : 9,000 ft. candles/96,900 lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
견고한 지브라 MC67 산업용PDA 시리즈를 사용하여 보다 빠르고 스마트한 작업에 필요한 도구를 현장 근무자에게 제공하십시오.
작업자는 완벽한 기능을 갖춘 이 기기를 사용하여 백엔드 시스템의 정보에 액세스하고 조건에 관계없이 거의 모든 바코드를 스캔할 수 있으며 문서를 캡처하여 간편하게 기록을 보관할 수 있습니다. 또한 실시간 수리 지원을 위해 동영상과 사진을 촬영, 전송할 수 있으며 도착 창에서 고객에게 전화를 할 수 있습니다.
현장 업무에 최적화된 지브라의 MC67 바코드PDA는 보다 많은 작업, 예를들어 장비수리, 물품픽업 또는 배송, 주문접수, 건물 또는 레스토랑 점검, 고지서 발행 또는 경쟁 정보 수집 등을 수행하는 모바일 컴퓨터입니다.
MC67 Base 모델
비용 효과적인 라인 확장을 통한 현장 근무자의 생산성 향상
MC67 Base는 MC67 시리즈의 비용대비 효과적인 확장입니다.
튼튼한 보급형 플랫폼을 찾는 고객들에게 MC67 Base는 현장 근로자에게 생산성을 높일 수 있는 모든 기능을 제공하며 MC65 및 MC55 액세서리와 역호환이 될 뿐 아니라 MC67 프리미엄 버전으로 귀사 시스템에 액세스할 수 있도록 지원합니다.
Windows® Embedded Handheld 6.5가 실행되는 MC67 Base는 복잡한 애플리케이션, 유연한 고속 이동통신 및 Wi-Fi 무선 연결을 지원하고 거의 모든 유형의 데이터를 캡처할 수 있습니다.
결과는? 향상된 고객 서비스. 고객 만족도 제고. 고객 유지 가능성 증대.
MC67 Premium 모델
작업자가 작업을 수행하는 데 필요한 모든 기능 제공
MC67 Premium을 사용하는 경우 모빌리티 전략을 가장 효과적으로 지원하는 운영 체제(Windows® Embedded Handheld 6.5 또는 Android™ Jelly Bean 4.1)를 선택하여 다양한 비즈니스 시스템 정보에 빠르게 액세스함으로써 작업 효율성과 정확성을 향상시킬 수 있습니다.
수리가 필요한 장비를 촬영한 동영상 클립을 보내 내부 전문가 또는 장비 제조업체로부터 즉시 조언을 얻습니다.
고해상도 스냅 사진으로 상황을 기록, 바코드를 스캔하여 사용 중인 부품을 빠르고 정확하게 추적하며 중요 문서는 캡처합니다.
고객에게 전화를 걸어 도착 시간 창을 업데이트합니다. 이메일을 확인하고 답장을 보냅니다.
또한 현재 MC65를 사용하는 경우 대부분의 기존 MC55/MC65 액세서리와의 백워드 호환성에 따라 최신 모바일 컴퓨팅 기술로의 비용 효율적인 업그레이드가 가능합니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.38 in. L x 3.03 in. W x 1.32 in. D (162.2 mm L x 77 mm W x 33.5 mm D)
Weight : 13.5 oz./385 g (with rechargeable 3600mAh Lithium Ion battery)
Display : 3.5 in. color VGA display, touch, 640 x 480 portrait, 650+ NIT s
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh battery
Backup Battery : Ni-MH battery (rechargeable) 15mAh 3.6V nominal (not user-accessible or replaceable)
Expansion Slot : Micro SD card slot (supports up to 32GB)
Communication : Interface: USB 2.0 high speed (host and client)
PERFORMANCE CHARACTERISTICS
CPU : Dual core 1GHz OMAP 4 processor
Operating System : Microsoft® Embedded Handheld 6.5 Professional
Memory : 256 MB RAM/2 GB Flash
DATA CAPTURE
Options :
2D SE4500-SR imager
2D SE4500-SR imager + 8 MP Camera
2D SE4500-DL imager + 8 MP Camera
2D SE4500-DL imager
2D SE4500-DPM/HD + 8 MP camera
Data Types : 1D/2D bar codes, photographs, video, signatures and documents
WIRELESS VOICE AND DATA COMMUNICATIONS
WAN Radio : 4G HSPA+ Frequency band: UMTS/HSDPA and HSUP A - 850, 900, 1900 and 2100 MHz; GSM/EDGE: 850, 900, 1800 and 1900 MHz
WLAN : Push-to-talk (PTT ); VoIP -ready
INTEGRATED GPS
Integrated standalone and Assisted-GPS (A-GPS): SUPL 1.0
WIRELESS PAN AND DATA COMMUNICATIONS
Bluetooth Class II , v2.1 with Enhanced Data Rate (EDR)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC55A0-HC 2D 헬스케어PDA 의료용모바일컴퓨터 산업용PDA 바코드PDA 매뉴얼HION IT
지브라 MC55A0-HC 헬스케어 PDA는 차세대 의료 모빌리티를 위해 소독이 가능한 견고한 의료용 모바일 컴퓨터로 휴대하기 쉽고 사용하기 쉬우며 환자 모니터링이 간편한 산업용PDA입니다.
MC55A0-HC 헬스케어 바코드 PDA는 병원용으로 설계되어 있어 일상적인 낙하와 충돌을 견딜 뿐만 아니라 환자용으로 사용한 후 소독도 가능합니다. 또한 강력한 무선 애플리케이션 성능과 무선 네크워크 옵션을 통해 의료 서비스 제공자가 이동 중에 환자 기록 액세스를 통해 환자 모니터링에 집중하고, 약을 정확히 투여하며, 환자의 활력 징후를 관찰하고, 검사실과 조제실에 지시하며, 검사 결과를 열람하는 등의 일을 모두 몇 초만에 병원 내 어디에서든 할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.78 in. L x 3.03 in. W x 1.1 in. D (14.7 cm L x 7.7 cm W x 2.8 cm D)
Weight : 11.9 oz./338 g (including standard battery)
Display : PenTile® 3.5 in Color VGA, super bright 650+ NITS
Touch Panel : Glass analog resistive touch
Display : Backlight LED backlight
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh Smart Battery
Backup Battery : Ni-MH battery (rechargeable) 18mAh 2.4V (not user accessible)
Expansion Slot : microSD slot with SDHC Support (maximum 32GB)
Comm. Interface : USB 1.1 host and client
Keypad Options : QWERTY; Numeric
Audio : VoWLAN; support for Bluetooth headsets; handset and speaker phone modes
PERFORMANCE CHARACTERISTICS
CPU : Marvell™ PXA 320 @ 806 MHz processor
Operating System : Microsoft® Windows Mobile ® 6.5 Classic
Memory : 256MB RAM; 1GB Flash
USER ENVIRONMENT
Operating Temp. : 14° F to 122° F/-10° C to 50°C
Storage Temp. : -40° F to 158° F/-40° C to 70° C
Humidity : 95% non-condensing
Drop Specification : Multiple 6 ft./1.8 m drops per MIL-STD 810G specifications
Tumble Specification : 1,000 1.6 ft./0.5 m tumbles (2,000 hits)
Sealing : IP64 per IEC sealing specifications
Clock : ntegrated real time clock
Electrostatic Discharge (ESD) : 15KV Air; 8KV Touch
BATTERY PERFORMANCE
User Profiles Minimally 8 hours based on 600 scans and WLAN transmits per hour with display on and standard capacity battery
DATA CAPTURE OPTIONS
Options 2D SE4500-DL imager; 3.2 MP auto-focus flash-enabled digital color camera; captures 1D and 2D bar codes, color photographs and video, signatures and documents
REGULATORY
Electrical Safety : Certified to UL/cUL 60950-1, IEC/EN60950-1
Environmental : RoHS-compliant
WLAN and Bluetooth (PAN) : USA: FCC Part 15.247, 15.407 Canada: RSS-210, RSS 310 EU: EN 300 328, EN 300 440-2, EN 301 893 Japan: ARIB STD-T33, ARIB STD-T66, ARIB STD-T70 & T71 Australia: AS/NZS 4268
RF Exposure : USA: FCC Part 2, FCC OET Bulletin 65 Supplement C Canada: RSS-102 EU: EN 50392 Australia: Radiocommunications Standard 2003
EMI/RFI : North America: FCC Part 15, Class B Canada: ICES 003 Class B EU: EN55022 Class B, EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 60601-1-2
Laser Safety : IEC/Class 2/FDA ll in accordance with IEC60825-1 /EN 60825-1
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC18 2D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
매장 방문 고객의 쇼핑 경험을 혁신적으로 개선한 지브라 MC18 산업용 PDA 퍼스널 쇼퍼로 쇼핑을 즐길 수 있는 고객 환경을 선사하십시오.
이 스마트폰형 첨단 모바일 컴퓨터는 고객에게 실시간 연결을 지원하여 진정한 가치를 선사합니다.
안드로이드 롤리팝 및 Zebra의 Mx(Mobility Extensions) 옵션으로 소비자용 안드로이드를 진정한 엔터프라이즈급 운영체제로 전환하는 일련의 기능이 추가되었습니다.
고객의 쇼핑 경험을 혁신적으로 개선
지브라 MC18 바코드 PDA 퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
Zebra MC18 산업용 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC18 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처할 수 있습니다.
지브라의 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 2.95 in. H x 8.58 in. L x 3.09 in. W/ 7.50 cm H x 21.80 cm L x 7.86 cm W
Weight : 10.6 oz./300 g (with battery)
Display : Color LCD; 4.0 inch 480x800 WVGA resolution; 16 bits/pixel RGB; LE D backlight; capacitive touch screen; Corning Gorilla Glass 3
Keyboard : 1 dedicated trigger key
Power Source : PowerPrecision+ 2725 mAh Li-Ion rechargeable battery
PERFORMANCE CHARACTERISTICS
Processor : TI OMAP 4430, Dual Core, 800MHz
Operating System :
Windows Embedded Compact 7
Microsoft Internet Explorer Embedded 7
Memory : 512 MB RA M/2 GB Flash or 1 GB RA M/4 GB Flash
Interface/Communications : USB 2.0 Client for Microsoft ActiveSync for service and maintenance
Light Source : Red LED Illumination with LED dot aim pattern
Scan Rate : Imaging rate: 30 Frames per second, 1280p x 800p
Ambient Light Immunity : Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED: 450 Ft. Candles (4,844 Lux) Sunlight: 8,000 Ft. Candles (86,111 Lux)
WIRELESS SECURITY
Wi-Fi Security Certification : Legacy, WPA and WPA 2
Authentication : None, EAP-TTLS (CHAP, MSCHAP, MSCHAPv2, PAP , MD5), EAP-TLS, PEAP (TLS, MSCHAPv2, GTC), LEAP and EAP-FAST (TLS, MSCHAPv2, GTC)
Encryption : WEP (40 or 104 bit), TKIP and AES
USER ENVIRONMENT
Operating Temperature : 32° to 104° F/0° to 40° C
Storage Temperature : 4° to 140° F/-20° to 60° C
Humidity : 40° C (RH 10% - 95%) non-condensing
Drop Specification : Withstands multiple 4 ft./1.2 m drops to vinyl tile over concrete
Tumble Specification : 1,000 0.5 m/1.64 ft. tumbles at room temperature
WIRELESS NETWORKING
WLAN : Wi-Fi IEEE 802.11a/b/g/n
WPAN : Bluetooth Class 1.5 2.1+EDR/ Bluetooth 4.0 with Bluetooth SMART technology
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PX4i PX6i 열전사감열 RFID 산업용 바코드프린터 매뉴얼HION IT
인터맥, EasyCoder PX (PX4i, PX6i) 시리즈 바코드프린터는 까다로운 산업환경에 맞게 설계된 견고한 금속의 고성능 프린터로, 24시간 작동을 지원합니다.
개방된 모듈식 디자인은 프린터가 쉽게 적응, 유지보수 및 서비스를 제공받을 수 있도록 합니다.
인터맥 PX 시리즈, PX4i 및 PX6i 산업용 바코드 프린터는 각각 4인치 또는 6인치의 최대 인쇄폭 기능이 특징입니다.
제조업 환경에서의 간편한 통합을 위해 설계된 PX 시리즈 산업용 프린터는 사실상 어떠한 위치라도 장착할 수 있습니다.
다기능성 폼 팩터가 라벨 자동부착기 같은 주변장치와의 연결을 용이하게 합니다.
인터맥 EasyCoder PX 시리즈 프린터는 사용자 정의 프로그램을 실행, 독립적으로 작동할 수 있어서 PC가 필요하지 않습니다.
최대 7개의 유선 및 무선 연결 인터페이스를 통해 스캐너, 스케일, 기타 프린터 및 컨베이어를 포함한 생산라인 기계장치에서 작동할 수 있을 뿐만 아니라 네트워크 호스트에서 정보에 직접 액세스할 수 있습니다.
최대의 성능 및 인쇄품질- 분당 최대 115개까지 6인치 길이의 컴플라이언스 라벨 인쇄
견고한 금속 구조로 열악한 산업환경에서도 24시간 / 7일 인쇄제공
변화하는 호스팅 환경 및 응요운야에 쉽게 적응
자동화된 라벨 부착 응용분야의 통합을 위한 모듈화 디자인
PC 비용을 들이지 않는 독립형 프린터 응용지원
IPL 또는 Fingerprinter/DP 프린터 명령 언어 선택
203, 300 또는 400 dpi 인쇄 해상도의 선택 사항을 제공하는 교체 가능한 프린트 헤드
PHYSICAL CHARACTERISTICS
LxHxW : 482 x 238 x 275 mm (19.0 x 9.4 x 10.8 in)
Weight : 12.85 kg (28.4 lbs)
PRINT SPECIFICATIONS
Max. Print Width : 112 (DT)/110 (TT) mm (4.4/4.3 in)
Max. Length :
4095 mm (161 in) at 203 dpi
2775 mm (109 in) at 300 dpi
1016 mm (40 in) at 406 dpi
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC
Generation 2
865-928 MHz radio configured to comply with local UHF RFID regulations including FCC and ETSI.
Contact local representative for availability in particular region.
PRINT SPEED
100 - 300 mm/s (4 - 12 ips) for 203/300dpi
100 - 250 mm/s (4 - 10 ips) for 406 dpi
MEDIA
Labels & Tags :
Max/Min Width : 120/ 25.4mm (4.72/ 1 in)
Thickness : 2.4 to 10.0 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter : 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Ribbons :
Roll Max Diameter : 80 mm (3.15in), approx. 450m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/ XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop, Applicator Interface
Wireless :
IEEE 802.11 b/g
Wi-Fi Certified, Cisco® Compatible (CCX) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAPTTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols : TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included. Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PM4i 열전사감열 RFID 바코드프린터 산업용프린터 매뉴얼HION IT
다기능 PM4i는 최신 RFID 기술과 함께 Intermec의 바코드프린터에서 사용자들이 기대해왔던 신뢰성 및 견고성과 함께 뛰어난 성능을 제공합니다.
기업들은 PM4i를 통해 RFID 어플리케이션을 구동시켜 RFID 스마트 라벨을 생성기킬 수 있습니다.
PM4i는 가변 주파수 RFID Tag 를 사용함으로써 전세계에서 사용할 수 있는 라벨 인코딩과 인쇄를 동시에 할 수 있으며, 이를 통해 지역 표준에 따라 달라지는 여러 주파수 Tag 를 읽을 수 있습니다.
PM4i 는 완벽한 프린터 독립성 어플리케이션에 대한 사용자 정의 프로그램을 실행하는 "스마트 클라이언트"의 역할도 할 수 있습니다.
PM4i 프린터는 PC 필요없이 추가적인 하드웨어(예, 스캐너, 다른 프린터, 컨베이어)를 작동시킬 수 있고, 네트워크 호스트로부터 정보에 접근할 수 있으며, 기능 추가를 위한 어플리케이션으로도 변경시킬 수 있습니다.
통합 EasyLAN 이더넷, USB, 직렬 연결은 PM4i와의 기본 인터페이스 입니다.
사용자는 추가적인 EasyLAN 무선 및 산업용 인터페이스 보드를 선택할 수 있습니다.
EasyLAN 무선 인터페이스는 통합 표준 802.11b 무선 통신을 사용합니다.
네트워크를 통해 이 무선 통신은 중계된 정보의 128-bit WEP 암호화를 제공합니다.
Intermec의 유선 및 무선 기술은 보안 인쇄와 모든 환경에 대한 네트워크 인프라를 보장합니다.
PM4i 바코드프린터는 공급망 전체에 걸쳐 신속하고 정확한 데이터 수집을 위해 모든 물품들이 RFID를 통해 라벨이 주어지고, 추적된다는 것을 보장하며, 제조업, 창고업 및 물류업 용도에 적합하도록 설계되었습니다.
향후 RFID 표준으로서의 UHF Gen 2를 지원
향후 RFID 표준 발전을 지원하기위한 고유 제품기능으로 고객 투자보호
주파수 가변 UHF Tag를 인코딩하는 최초의 RFID 프린터
바코드, 판독 가능한 택스트, 그래픽을 동시인쇄
독립형 프린터 어플리케이션 지원
통합 EastLAN 이더넷, USB, 직렬 인터페이스 표준
EasyLAN 무선 인터페이스(옵션)
DESCRIPTION
Direct thermal and thermal transfer label, ticket and tag printer. Also available with RFID.
PHYSICAL CHARACTERISTICS
LxHxW : 543 x 261 x 298mm (21.38 x10.28 x 11.73 in)
Weight : 13.5 kg (29.76 lbs.)
PRINT SPECIFICATIONS
Max. Width : 104 mm (4.09 in) at 203 dpi and 406dpi; 105.7 mm (4.16 in) at 300 dpi.
Max. Length : 4095 mm (161.2 in) at 203 dpi; 2730 mm (107.5 in) at 300 dpi. 1016 mm (40 in) at 406 dpi.
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC Class 1 Generation 2, 865-928 MHz radio configured to comply with local UHF FID regulations including FCC and ETSI. Contact local representative for availability in particular regions.
PRINT SPEED
100 - 200 mm/s (4 - 8 ips) variable (203 dpi)
100 - 150 mm/s (4 - 6 ips) variable (300/406 dpi)
PRINT RESOLUTION
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
16 dots/mm (406 dpi)
MEDIA
Type : Labels and Tags
Max/Min Width : 114.3 /25.4 mm (4.5 /1 in)
Thickness : 2.5 to 8.7 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diamete r: 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 82 mm (3.2 in), approx. 450m
Core ID : 25.4 mm (1 in)
Type : Wax, mid-range, resin
MEMORY
Standard : 16MB Flash memory, 32MB SDRAM, 1 Compact Flash slot
Available : 1GB CompactFlash memory, multi-GB USB memory device (FAT16/FAT32 USB drivers supported)
POWER SUPPLY
AC Voltage : 90 to 265 VAC, 45 to 65Hz
PFC Regulation : IEC 61000-3-2
Power Consumption : Standby 15W; Peak 300W
OPERATING ENVIRONMENT
Ambient Operating Temperature : +5°C to +40°C (+41°F to +104°F)
Storage Temperature : -20°C to +70°C (-4°F to +152°F)
Humidity : 20 to 80% non-condensing
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PF2i PF4i 열전사감열 바코드프린터 산업용프린터 매뉴얼HION IT
컴팩트한 PF2i, PF4i 미드 레인지 바코드프린터는 인터맥의 스마트하고 강하고 안전한 산업용 프린터 제품입니다.
Intermec SmartSystems ™ 및 Wavelink Avalanche ™를 통해 PF2i의 통합 장치관리 및 진단 기능은 가동 중단 시간을 줄이고 설치를 단순화합니다
견고한 All-Metal PF2i 바코드프린터는 다운 타임을 줄이고 유지 보수 비용을 최소화하는 기능을 통합합니다.
작은 크기에도 불구하고 PF2i는 풀 사이즈 라벨 롤 (최대 8.4 in / 213 mm)을 사용하여 용지 교체 횟수를 줄입니다.
QuickMount ™ 프린트 헤드 디자인 덕분에 프린트 헤드를 빠르고 쉽게 교체 할 수 있습니다.
최고 수준의 보안 무선 연결 (WPA2)을 포함한 여러 보안 인터페이스 옵션을 사용할 수 있습니다.
업계 유일의 프린터인 WiFi- 및 CCX-Certification과 함께 사용할 수있는 인터맥 산업용 프린터는 무선 네트워크 무결성을 유지하고 구성 시간을 단축시킵니다.
모든 프린터는 이더넷 연결 및 출현하는 네트워크 프로토콜 IPv6과 함께 제공되므로 장기간의 엔터프라이즈 확장성을 보장합니다.
기타 연결 옵션 - 표준 RS232 및 USB 포트, 옵션 병렬, 이중 직렬 또는 산업용 인터페이스는 통합 유연성을 추가로 제공합니다.
Strong, all-metal construction and superior throughput for harsh industrial environments
Compact size fits space- constrained applications
Smart Printing capabilities support stand-alone printer applications, eliminating PC expense and complexity
All-in-one, user-selectable printer languages Fingerprint/Direct Protocol (DP), IPL, ZSim and DSim in every printer
Secure wireless connectivity : CCX and WiFi® certified with WPA2
Integrated Ethernet, USB host and device, and serial interface standard
Internet Protocol v6 (IPv6) support
PHYSICAL CHARACTERISTICS
Length : 397 mm (15.6 in)
Height : 178 mm (7 in)
Height (big top) : 205 mm (8.1 in)
Width : 194 mm (7.6 in)
Weight : 5.5 kg (12 lbs.)
PRINT SPECIFICATIONS
Max. Width: 56 mm (2.2 in)
Max. Length: 4095 mm (161.2 in)
Print Speed : 100 ? 200 mm/s (4 - 8 ips) variable
Print Resolution : 8 dots/mm (203 dpi)
MEDIA
Type : Labels & Tags
Max/ Min Width : 60/25.4 mm (2.36/1 in)
Thickness : 3.0 to 7.5 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter (long door): 152.4 mm (6 in)
Label Roll Max Diameter (short door): 213 mm (8.38 in)
Label Roll Core: 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 65 mm (2.56 in), approx. 225m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop
Wireless:
IEEE 802.11 b/g
Wi-Fi Certified, CCX (Cisco®) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAP- TTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols :
TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 INTERMEC PD43 PD43c 2D 열전사 산업용 바코드프린터 매뉴얼HION IT
경공업 (Light Industrial) 산업에 적합한 열전사 인쇄타입의 PD43, PD43c 바코드 프린터는 설치공간이 협소한 얕은 조리대 및 인출 타입의 캐비넷 공간에서의 설치사용이 용이한 혁신적인 인쇄 성능을 제공합니다.
인터맥 PD43, PD43c 바코드 프린터 물류센터 및 배송센터, 물류창고, 항공기내 승객서비스 등에 적합하며, 외형은 금속재질, 강력한 캐스트알루미늄 인쇄 메커니즘, 프린터 헤드 및 롤러 교체시 도구 필요없어 다운타임을 최소화 하도록 설계되었습니다.
Intermec PD43은 호스트 컴퓨터가 없어도 설정을 쉽게 구성, 구성 및 미세 조정할 수있는 컬러 그래픽 디스플레이를 제공합니다.
실제로 스마트 인쇄 기능을 통해 PD43 은 프린터 내부에서 바로 응용 프로그램을 실행할 수 있으므로 연결된 PC가 필요하지 않습니다.
Incredibly Compact: Small footprint for installation into compact tabletops and pull-out cabinets.
Built Strong: Rugged metal chassis and print mechanism provide investment protection.
Easy to Use: Intuitive, ten-language color display or icon interface simplifies setup and maintenance.
uilt-In Command Languages: Fast, friendly and complete printer emulation-including ZSim2, our most comprehensive ZPL-II® emulation ever-makes upgrading from other printer brands easy.
Smart Printer: Run apps right inside the printer, control peripherals, and eliminate the need for a connected PC, using either C# for Printers or Fingerprint.
Maintenance Made Easy: Completely tool-free printhead and platen roller replacement.
Broad Media Compatibility: Supports half- and one-inch ribbon cores, ink-in or ink-out.
Co-Engineered Media: Extensively tested with Intermec co-engineered media products, ensuring optimized performance. Compatible with Honeywell's broad range of media products.
Available Accessories: Customize with a wide range of available accessories such as a Wi-Fi/Bluetooth® module and cutter.
PHYSICAL CHARACTERISTICS
Length ;
PD43 with Standard Door : 470 mm (18.5 in)
PD43 with Flat Top Door : 470 mm (18.5 in)
PD43c : 236 mm (9.3 in)
PD43c with Optional External Media Holder : 432 mm (17.0 in)
Width ;
PD43 with Standard Door : 211 mm (8.3 in)
PD43 with Flat Top Door : 211 mm (8.3 in)
PD43c : 211 mm (8.3 in)
PD43c with Optional External Media Holder : 211 mm (8.3 in)
Height ;
PD43 with Standard Door : 249 mm (9.8 in)
PD43 with Flat Top Door : 209 mm (8.2 in)
PD43c : 205 mm (8.1 in)
PD43c with Optional External Media Holder : 217 mm (8.5 in)
Weight ;
PD43 with Standard Door : 8.4 kg (18.5 lbs)
PD43 with Flat Top Door : 8.3 kg (18.3 lbs)
PD43c : 5.1 kg (11.2 lbs)
PD43c with Optional External Media Holder : 6.0 kg (13.2 lbs)
PRINT SPECIFICATIONS
Max Print Width : 104 mm (4.1 in)
Print Speed : 203 mm/s (8.0 ips) @ 8.0 dpmm (203 dpi), 152 mm/s (6.0 ips) @ 11.8 dpmm (300 dpi)
Resolution : 8.0 dpmm (203 dpi), 11.8 dpmm (300 dpi)
Media Compatibility
Max. Media Diameter (OD) ;
PD43 with Standard Door : 213 mm (8.375 in)
PD43 with Flat Top Door : 152 mm (6.0 in)
PD43c with External Media Holder : 203 mm (8.0 in)
Media Core Sizes (ID) : 1, 1.5, 3 in
Media Width : 19 mm (0.75 in) to 118 mm (4.65 in)
Label Length : 6.4 mm (0.25 in) to 172.7 cm (68.0 in)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
5. Agency Compliance
This product complies to the following:
CFR 47 Part 15, Class A Digital Device
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) This device may not
cause harmful interference, and 2) this device must accept any
interference received, including interference that may cause
undesired operation.
This Class A digital apparatus complies with Industry Canada ICS-
003 class A requirements.
UL 60950-1 Safety of Information Technology Equipment Including
Electrical Business Equipment
CAN/CSA-C22.2 No.60950-1 Safety of Information Technology
Equipment Including Electrical Business Equipment
European Council Directive 2004/108/EC “EMC Directive”
EN55022, Emissions, Class A
EN55011, Emissions, Class A (p1120n only)
EN55024, Immunity
EN61000-3-2, Harmonics
EN61000-3-3, Voltage Fluctuations and Flicker
European Council Directive 206/95/EC “Low Voltage Directive”
EN60950-1
IEC 60950-1 (CB Scheme)
IEC 60825-1 Safety of Laser Products (applies to barcode reader
option)
EN 300 328 V1.7.1 (2006-10) - Electromagnetic Compatibility and
Radio Spectrum Matters (applies to 802.11b/g wireless module
option
EN45014 General Criteria for Suppliers Declaration of Conformity
Directive 93/68/EEC CE Marking
Directives 2002/95/EC RoHS and 2011/65/EU RoHS2
Customs Union – Russia, Kazakhstan, Belarus
6.
7. Performance Series User’s Guide
Table of Contents
1. Safety
Warnings and Cautions ..................................................1
General Safety Information ............................................. 1
2. Overview
About the Printer ............................................................. 3
p1115 Standard Features ............................................... 6
p1115s Standard Features ............................................. 8
p1120n Standard Features ........................................... 10
p1125 Standard Features ............................................. 12
p1725 Standard Features ............................................. 14
Options ......................................................................... 16
Unpacking the Printer ................................................... 16
Specifications ............................................................... 17
3. Connections and Setup
Connections .................................................................. 19
Media Loading ..............................................................19
Installing Ribbon ........................................................... 32
Configuring Media and Ribbon Settings ....................... 37
Optional Rewinder ........................................................ 40
Top-of-Form Sensor ..................................................... 42
Removing Ribbon Wrinkle ............................................ 47
Manual Head Pressure Adjustment (p1115 only) ......... 49
Installing Cutter and Tray ............................................. 51
Upward-Facing Present Sensor ................................... 57
Print Driver Installation ................................................. 59
4. Menu System
Menu Overview ............................................................. 61
Layout of the Display .................................................... 61
Three Button Panel .......................................................62
Home Screen ................................................................ 62
Information Button .......................................................63
8. Table of Contents
Performance Series User’s Guide
Feed Button .................................................................. 68
Menu ............................................................................69
5. Cleaning and Maintenance
Overview ..................................................................... 107
Intervals ...................................................................... 107
Supplies ...................................................................... 107
Cleaning the Automatic Loading Sensor .................... 107
Cleaning the Top-of-Form Sensor .............................. 107
Cleaning the Paper Low Sensor ................................. 108
Cleaning the Printhead ............................................... 108
Cleaning the Cutter .....................................................108
6. Maintenance
Safety Overview ......................................................... 109
Tools Needed ............................................................. 109
Replacing the Printhead ............................................. 109
Replacing the Upper Platen Roller ............................. 112
7. Troubleshooting
Errors ..........................................................................117
Warnings .................................................................... 118
Troubleshooting .......................................................... 118
Troubleshooting Print Quality ..................................... 121
8. Terms and Definitions
Processing State ........................................................ 123
Printer State ................................................................ 123
Media Setup ............................................................... 123
Basic ........................................................................... 123
Advanced .................................................................... 124
Tools ........................................................................... 128
Test ............................................................................. 128
9. Appendix A
Symbol Sets ............................................................... 131
Fonts ........................................................................... 132
Barcodes .................................................................... 134
9. 1 Performance Series User’s Guide
1 Safety
Warnings and Cautions
The following Warnings and Cautions are used throughout this manual:
Warning: Warnings alert you to possible safety risks.
Caution: Cautions alert you to the potential for equipment damage.
General Safety Information
Caution: This product is intended for indoor use only.
All service procedures should be done by properly trained and qualified service
personnel.
Any on-site assembly required during the installation process must be performed by
properly trained and qualified service personnel.
The product must be connected to a properly grounded and appropriately rated AC
receptacle using the supplied cord set.
Caution: This product contains sensitive electronic components that could be damaged
if exposed to excessive force.
Caution: Use only factory-approved consumables and cleaning kits. Use of any non-
approved supplies could damage the product and void the warranty.
Caution: Do not connect the wireless antenna connection to any outside plant
connection.
Figure: 1 - 1 Caution - Hot
The printhead heats during printing. Do not touch.
11. 3 Performance Series User’s Guide
2 Overview
About the Printer
Product Tour
The following illustrations show some of the features and available options for the printer.
Figure: 2 - 1 Front View
1. Touchscreen Control Panel
2. Power LED
3. Error LED
4. Cutter (Optional)
5. Cutter Tray (Optional)
6. USB Host (Optional)
1
2
3
4
5
6
Some features and options are not available on all models.
12. 2 | Overview
Performance Series User’s Guide 4
Figure: 2 - 2 Rear View
1
2
3
4
5
6
7
8
9
1. Wireless Antenna (Optional)
2. Reset Switch
3. GPIO Port (Optional)
4. Serial Port (Optional)
5. Ethernet/Network Port
6. USB Port
7. Power Switch
8. Fanfold Media Slot
9. Rear Compartment Vent
10.AC Power Inlet
10
Some features and options are not available on all models.
13. Overview | 2
5 Performance Series User’s Guide
Figure: 2 - 3 Media Area
.
1. Head Pressure Adjustment
Wheel (p1115 Only)
2. Power Ribbon Transport
Assembly (Optional)
3. Ribbon
4. Media
5. Media Hanger
6. Printhead Carriage Assembly
7. Printhead Latch
8. Printhead Latch Lever
9. Rear Fanfold Media Access Slot
10.Platen Carriage Assembly
11. Media Width Guide Adjustment
Knob
12.Bouncer
13.Lower Fanfold Media Access
Slot
14.Power Media Rewinder
Assembly (Optional)
1 2 3 4 5
6
7
8
9
10
11 12 13 14
Some features and options are not available on all models.
14. 2 | Overview
Performance Series User’s Guide 6
p1115 Standard Features
The p1115 thermal printer has the following standard features:
Table 1: p1115 Standard Features
Features Descriptions
Power Supply 110V to 230V
Max Print Speed 6 IPS / 152 mmps
Resolution 300 dpi / 11.8 dpmm
Memory 32MB Flash (4MB User Space) / 64MB DDR2 SDRAM
Printer Type • Direct Thermal
• Thermal Transfer (Optional)
Media Supply • Fan fold
• Roll-fed
• Die-cut
• Continuous Labels: perforated or continuous tag/ticket stock (8”
[203mm] roll max diameter.
Double-sided Top-of-Form
Sensor
Adjustable position for center-biased stock:
• Label Gap
• Notch
• Reflective black mark on the bottom or the top of the form
Tear Bar Removable bar for tearing off gapped or continuous media.
Media Back Feed Capable of backing up at least 1.0”.
Control panel LED backlit color QVGA LCD with touchscreen.
Reset Button Inset on the rear of the unit for recovery or the resetting of the screen
calibration.
LEDs Two LEDs on the front panel for Power and Error.
Power Switch Positioned on the rear of the unit.
Chassis / Media Cover Die cast construction with a clear side window.
Bar Codes See Appendix A
Fonts See Appendix A
Downloadable Font Types • True-Type Scalable
• PCL Bitmap
Graphics Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file formats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)
15. Overview | 2
7 Performance Series User’s Guide
Print Characteristics
Table 2: Print Characteristics
*Media wound out.
**Coated side in (CSI) or coated side out (CSO).
Industry Standard Printer
Language
HP PJL, HP PCL5e, HP GL/2 and HP XL, printer languages with auto-
language select and extensions for barcode capabilities. Bi-directional
communications capability is also supported.
Interfaces • USB 2.0 Device
• LAN 10/100
Real Time Clock User replaceable battery
Printer Driver Supported
Operating Systems
• Windows XP
• Windows Vista
• Windows 7
• Windows 8
Operating Temperature 32°F (0°C) to 104°F (40°C)
Supported Languages in the
Display
Front panel languages are configurable via translation files which may
be loaded on the printer. Check with your sales representative for the
most recent list of available translations.
Variable Specifications
Print Resolution 300 dpi (11.8 dpmm)
Max Print Width 4.16” (105.7 mm)
Max Print Speed 6 IPS (152 mmps)
Max Feed Speed 8 IPS (152 mmps)
Max Back-up Speed 5 IPS (127 mmps)
Media Width Range* 1” - 4.65” (25.44 mm - 118.1 mm)
Media Thickness Range* .003” - 0.010” (.076 mm - 0.254 mm)
Ribbon Width Range** 1” - 4.65” (25.44 mm - 118.1 mm)
Print Length .25” - 36” (6.35 mm - 915 mm)
Features Descriptions
16. 2 | Overview
Performance Series User’s Guide 8
p1115s Standard Features
The p1115s thermal printer has the following standard features:
Table 3: p1115s Standard Features
Features Descriptions
Max Print Speed 6 IPS / 152 mmps
Resolution 600 dpi / 23.6 dpmm
Memory 64MB Flash (32MB User Space) / 64MB DDR2 SDRAM
Printer Type • Direct Thermal
• Thermal Transfer (Optional)
Media Supply • Fan fold
• Roll-fed
• Die-cut
• Continuous Labels: perforated or continuous tag/ticket stock (8”
[203mm] roll max diameter on 1.0”, 1.5” or 3” [25mm, 38mm or
76mm] core).
Double-sided Top-of-Form
Sensor
Adjustable position for center-biased stock:
• Label Gap
• Notch
• Reflective black mark on the bottom or the top of the form
Tear Bar Removable bar for tearing off gapped or continuous media.
Media Back Feed Capable of backing up at least 1.0”.
Control panel LED backlit color QVGA LCD with touchscreen.
Reset Button Inset on the rear of the unit for recovery or the resetting of the screen
calibration.
LEDs Two LEDs on the front panel for Power and Error.
Power Switch Positioned on the rear of the unit.
Chassis / Media Cover Diecast construction with a clear side window.
Bar Codes See Appendix A
Fonts See Appendix A
Downloadable Font Types • True-Type Scalable
• PCL Bitmap
Graphics Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file formats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)
17. Overview | 2
9 Performance Series User’s Guide
Print Characteristics
Table 4: Print Characteristics
*Media wound out.
**Coated side in (CSI) or coated side out (CSO).
Industry Standard Printer
Language
HP PJL, HP PCL5e, HP GL/2 and HP XL, printer languages with auto-
language select and extensions for barcode capabilities. Bi-directional
communications capability is also supported.
Interfaces • USB 2.0 Device
• LAN 10/100
Real Time Clock User replaceable battery
Printer Driver Supported
Operating Systems
• Windows XP
• Windows Vista
• Windows 7
• Windows 8
Operating Temperature 32°F (0°C) to 104°F (40°C)
Supported Languages in the
Display
Front panel languages are configurable via translation files which may
be loaded on the printer. Check with your sales representative for the
most recent list of available translations.
Variable Specifications
Print Resolution 600 dpi (23.6 dpmm)
Max Print Width 4.16” (105.6 mm)
Max Print Speed 6 IPS (152 mmps)
Max Feed Speed 8 IPS (152 mmps)
Max Back-up Speed 5 IPS (127 mmps)
Media Width Range* 1” - 4.65” (25.44 mm - 118.1 mm)
Media Thickness Range* .003” - 0.010” (.076 mm - 0.254 mm)
Ribbon Width Range** 1” - 4.65” (25.44 mm - 118.1 mm)
Print Length .25” - 36” (6.35 mm - 915 mm)
Features Descriptions
18. 2 | Overview
Performance Series User’s Guide 10
p1120n Standard Features
The p1120n thermal printer has the following standard features:
Table 5: p1120n Standard Features
Features Descriptions
Max Print Speed 8 IPS / 203 mmps
Resolution 300 dpi / 11.8 dpmm
Memory 32MB Flash (4MB User Space) / 64MB DDR2 SDRAM
Printer Type • Direct Thermal
• Thermal Transfer (Optional)
Media Supply • Fan fold
• Roll-fed
• Die-cut
• Continuous Labels: perforated or continuous tag/ticket stock (8”
[203mm] roll max diameter on 1.0”, 1.5” or 3” [25mm, 38mm or
76mm] core).
Double-sided Top-of-Form
Sensor
Adjustable position for center-biased stock:
• Label Gap
• Notch
• Reflective black mark on the bottom or the top of the form
Tear Bar Removable bar for tearing off gapped or continuous media.
Media Back Feed Capable of backing up at least 1.0” (for near edge printhead).
Control panel LED backlit color QVGA LCD with touchscreen.
Reset Button Inset on the rear of the unit for recovery or the resetting of the screen
calibration.
LEDs Two LEDs on the front panel for Power and Error.
Power Switch Positioned on the rear of the unit.
Chassis / Media Cover Diecast construction with a clear side window.
Bar Codes See Appendix A
Fonts See Appendix A
Downloadable Font Types • True-Type Scalable
• PCL Bitmap
Graphics Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file formats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)
19. Overview | 2
11 Performance Series User’s Guide
Print Characteristics
Table 6: Print Characteristics
*Media wound out.
**Coated side in (CSI) or coated side out (CSO).
Industry Standard Printer
Language
HP PJL, HP PCL5e, HP GL/2 and HP XL, printer languages with auto-
language select and extensions for barcode capabilities. Bi-directional
communications capability is also supported.
Interfaces • USB 2.0 Device
• LAN 10/100
Real Time Clock User replaceable battery
Printer Driver Supported
Operating Systems
• Windows XP
• Windows Vista
• Windows 7
• Windows 8
Operating Temperature 32°F (0°C) to 104°F (40°C)
Supported Languages in the
Display
Front panel languages are configurable via translation files which may
be loaded on the printer. Check with your sales representative for the
most recent list of available translations.
4” Near Edge
Print Resolution 300 dpi (11.8 dpmm)
Max Print Width 4.27” (108.5 mm)
Max Print Speed 8 IPS (203 mmps)
Max Feed Speed 10 IPS (254 mmps)
Max Back-up Speed 5 IPS (127 mmps)
Media Width Range* 1” - 4.65” (25.44 mm - 118.1 mm)
Media Thickness Range* .003” - 0.020” (.076 mm - 0.508 mm)
Ribbon Width Range** 1” - 4.65” (25.44 mm - 118.1 mm)
Print Length .2” - 99” (5.08 mm - 2475.6 mm)
Features Descriptions
20. 2 | Overview
Performance Series User’s Guide 12
p1125 Standard Features
The p1125 thermal printer has the following standard features:
Table 7: p1125 Standard Features
Features Descriptions
Max Print Speed 10 IPS / 254 mmps
Resolution 300 dpi / 11.8 dpmm
Memory 32MB Flash (4MB User Space) / 64MB DDR2 SDRAM
Printer Type • Direct Thermal
• Thermal Transfer (Optional)
Media Supply • Fan fold
• Roll-fed
• Die-cut
• Continuous Labels: perforated or continuous tag/ticket stock (8”
[203mm] roll max diameter on 1.0”, 1.5” or 3” [25mm, 38mm or
76mm] core).
Double-sided Top-of-Form
Sensor
Adjustable position for center-biased stock:
• Label Gap
• Notch
• Reflective black mark on the bottom or the top of the form
Tear Bar Removable bar for tearing off gapped or continuous media.
Media Back Feed Capable of backing up at least 1.0”.
Control panel LED backlit color QVGA LCD with touchscreen.
Reset Button Inset on the rear of the unit for recovery or the resetting of the screen
calibration.
LEDs Two LEDs on the front panel for Power and Error.
Power Switch Positioned on the rear of the unit.
Chassis / Media Cover Diecast construction with a clear side window.
Bar Codes See Appendix A
Fonts See Appendix A
Downloadable Font Types • True-Type Scalable
• PCL Bitmap
Graphics Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file formats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)
21. Overview | 2
13 Performance Series User’s Guide
Print Characteristics
Table 8: Print Characteristics
*Media wound out.
**Coated side in (CSI) or coated side out (CSO).
Industry Standard Printer
Language
HP PJL, HP PCL5e, HP GL/2 and HP XL, printer languages with auto-
language select and extensions for barcode capabilities. Bi-directional
communications capability is also supported.
Interfaces • USB 2.0 Device
• LAN 10/100
Real Time Clock User replaceable battery
Printer Driver Supported
Operating Systems
• Windows XP
• Windows Vista
• Windows 7
• Windows 8
Operating Temperature 32°F (0°C) to 104°F (40°C)
Supported Languages in the
Display
Front panel languages are configurable via translation files which may
be loaded on the printer. Check with your sales representative for the
most recent list of available translations.
Variable Specifications
Print Resolution 300 dpi (11.8 dpmm)
Max Print Width 4.27” (108.5 mm)
Max Print Speed 10 IPS (254 mmps)
Max Feed Speed 12 IPS (254 mmps)
Max Back-up Speed 5 IPS (127 mmps)
Media Width Range* 1” - 4.65” (25.44 mm - 118.1 mm)
Media Thickness Range* .003” - 0.010” (.076 mm - 0.254 mm)
Ribbon Width Range** 1” - 4.65” (25.44 mm - 118.1 mm)
Print Length .10” - 99” (5.08 mm - 2475.6 mm)
Features Descriptions
22. 2 | Overview
Performance Series User’s Guide 14
p1725 Standard Features
The p1725 thermal printer has the following standard features:
Table 9: p1725 Standard Features
Features Descriptions
Max Print Speed 10 IPS / 254 mmps
Resolution 300 dpi / 11.8 dpmm
Memory 64MB Flash (32MB User Space) / 64MB DDR2 SDRAM
Printer Type • Direct Thermal
• Thermal Transfer (Optional)
Media Supply • Fan fold
• Roll-fed
• Die-cut
• Continuous Labels: perforated or continuous tag/ticket stock (8”
[203mm] roll max diameter on 1.0”, 1.5” or 3” [25mm, 38mm or
76mm] core).
Double-sided Top-of-Form
Sensor
Adjustable position for center-biased stock:
• Label Gap
• Notch
• Reflective black mark on the bottom or the top of the form
Tear Bar Removable bar for tearing off gapped or continuous media.
Media Back Feed Capable of backing up at least 1.0”.
Control panel LED backlit color QVGA LCD with touchscreen.
Reset Button Inset on the rear of the unit for recovery or the resetting of the screen
calibration.
LEDs Two LEDs on the front panel for Power and Error.
Power Switch Positioned on the rear of the unit.
Chassis / Media Cover Diecast construction with a clear side window.
Bar Codes See Appendix A
Fonts See Appendix A
Downloadable Font Types • True-Type Scalable
• Intellifont Scalable
• PCL Bitmap
Graphics Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file formats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)
23. Overview | 2
15 Performance Series User’s Guide
Print Characteristics
Table 10: Print Characteristics
*Media wound out.
**Coated side in (CSI) or coated side out (CSO).
Industry Standard Printer
Language
HP PJL, HP PCL5e, HP GL/2 and HP XL, printer languages with auto-
language select and extensions for barcode capabilities. Bi-directional
communications capability is also supported.
Interfaces • USB 2.0 Device
• LAN 10/100
Real Time Clock User replaceable battery
Printer Driver Supported
Operating Systems
• Windows XP
• Windows Vista
• Windows 7
• Windows 8
Operating Temperature 32°F (0°C) to 104°F (40°C)
Supported Languages in the
Display
Front panel languages are configurable via translation files which may
be loaded on the printer. Check with your sales representative for the
most recent list of available translations.
Variable Specifications
Print Resolution 300 dpi (11.8 dpmm)
Max Print Width 6.83” (173.5 mm)
Max Print Speed 10 IPS (254 mmps)
Max Feed Speed 12 IPS (254 mmps)
Max Back-up Speed 5 IPS (127 mmps)
Media Width Range* 2” - 7.1” (50.8 mm - 180.3 mm)
Media Thickness Range* .003” - 0.010” (.076 mm - 0.254 mm)
Ribbon Width Range** 2” - 7.1” (50.8 mm - 180.3 mm)
Print Length .25” - 36” (6.35 mm - 915 mm)
Features Descriptions
24. 2 | Overview
Performance Series User’s Guide 16
Options
The following options are available:
• Thermal Transfer (Ribbon)
• Internal Power Rewind with Batch Rewind
• Media Present Sensor (Future option for the p1725)
• Peel and Present (Future option for the p1725)
• Media Cutter (Future option for the p1725)
• Media Cutter Tray (Future option for the p1725)
• Applicator Port (General Purpose I/O) and Serial Port (RS-232C)
• Wireless Module (not an available option for the p1115)
• USB Host Port (not an available option for the p1115)
• Audio Indicator (not an available option for the p1115)
• Media Hub with 1.0”,1.5” or 3” media hub adapters (not an available option for the
p1725)
• Non-US Power Cords
Unpacking the Printer
Upon receiving the printer, verify the box is undamaged. Carefully unpack the printer
from its packaging and visually check for any physical damage that may have occurred
during shipment.
Checking the Contents
The contents may vary depending on your configuration. It is recommended that all
packaging materials be saved if the printer is to be shipped again. If the packaging
material is discarded, new packaging material may be available from your reseller.
• Printer
• Power Cord
• Driver CD
• Product documentation not included on the CD
• Accessories/Options
Additional items that may be required include the following:
• All applicable communication cables
• Media
• Ribbon
25. Overview | 2
17 Performance Series User’s Guide
Specifications
Dimensions and Weight
Table 11: Dimensions and Specifications (p1115, p1115s, p1120n, p1125)
Table 12: Dimensions and Specifications (p1725)
Environmental
Table 13: Temperatures
Print Driver Requirements
Table 14: Print Driver Minimum System Requirements
Configuration Utility
Table 15: Configuration Utility Minimum System Requirements
Height Width Depth Weight
11.9 in (30.3 cm) 10.8 in (27.4 cm) 18.7 in (47.5 cm) 41 lbs. (19 kg)
Height Width Depth Weight
11.9 in (30.3 cm) 13.4 in (34 cm) 18.7 in (47.5 cm) 52 lbs. (24 kg)
Temperature Humidity
Operating 32°F to 104°F (0°C to 40°C) <=20% to 80%
Storage -4°F to 140°F (-20°C to 60°C) <=35%
Minimum System Requirements
Processor / Speed 500 MHz processor
RAM 512MB
Hard Drive Space 6MB
Supported Operating Systems Windows XP - x86 & x64
Windows Vista - x86 & x64
Windows 7 - x86 & x64
Windows 8
Minimum System Requirements
Processor / Speed 500 MHz processor
26. 2 | Overview
Performance Series User’s Guide 18
Supported Operating Systems Windows XP - x86 & x64
Windows Vista - x86 & x64
Windows 7 - x86 & x64
Windows 8
RAM 256MB
Hard Drive Space 5MB
Minimum Screen Resolution 800 x 600
.NET Framework 2.0
Minimum System Requirements
27. 19 Performance Series User’s Guide
3 Connections and Setup
Connections
Power
To connect the printer to a viable power source, please follow the steps below.
Caution: Ensure the printer power switch is off before connecting the AC power and
data/network connectivity cables to the printer.
Caution: Adhere to all environmental requirements when installing and using the printer.
Use of the product in an unsuitable environment may affect print quality and the
durability of the printer and may void the manufacturer’s warranty.
1. Place the printer on a suitable level surface capable of securely supporting 60lbs.
2. Connect the AC power cord to the AC power inlet on the back of the printer.
3. Connect the AC power cord to AC utility power.
Data
Printer data connectivity can be accomplished by the following standard or optional
interfaces:
• USB
• Ethernet/Network
• Serial (Optional)
• GPIO (Optional)
• Wireless (Optional)
Connect the appropriate interface cables for your network configuration.
Media Loading
The printer is designed to print on media that is center-aligned on the media hanger.
There are two different media mounts available for most models.
The standard self-centering media hanger synchronizes the adjustment to facilitate the
centering of the media. The optional self-centering media hub* allows for the use of 1”,
1.5” and 3” roll cores.(*Not available for all printer models.)
Please consult your sales representative to obtain the appropriate media.
Note: The printer should be connected to AC power and running during media loading.
28. 3 | Connections and Setup
Performance Series User’s Guide 20
Media Hanger Overview
Figure: 3 - 1 Self-Centering Media Hanger
Media Specifications
Media core size:
• 3” (76.199mm)
Media roll diameter:
• Maximum -- 8”
1. Inside media adjustment lever
2. Paper low sensor (Optional)
3. Self-centering media hanger
4. Outside media adjustment lever
5. Media adjuster knob
1
2
3
4
5
29. Connections and Setup | 3
21 Performance Series User’s Guide
Media roll width:
• Please refer to the model feature charts in the Overview section.
Media thickness:
• .003” to 0.01” (the p1120n can accept media thickness of up to 0.020”)
Media dimensions:
• Please refer to the model feature charts in the Overview section.
Note: Ensure there is no tape or adhesive residue on the media roll.
Installing Media on the Media Hanger
1. Open the media cover.
2. Unlock the printhead mechanism by turning the printhead latch lever clockwise
about 190°.
Note: Do not unlatch the printhead mechanism.
Figure: 3 - 2 Unlock the Printhead Mechanism
30. 3 | Connections and Setup
Performance Series User’s Guide 22
3. Center the media adjuster knob and pull it to widen the gap between the two media
adjustment levers.
Figure: 3 - 3 Self-Centering Media Hanger from Top
4. Rotate the outside media adjustment lever downward.
Figure: 3 - 4 Outside Media Adjustment Lever
31. Connections and Setup | 3
23 Performance Series User’s Guide
5. Gently route the media core over the outside media adjustment lever onto the
media hanger.
Caution: Be careful not to damage the outside media adjustment lever.
Figure: 3 - 5 Media Installation
6. Rotate the outside media adjustment lever upward.
Figure: 3 - 6 Outside Media Adjustment Lever
7. Slide the media adjuster knob inward to center the media roll on the media hanger.
32. 3 | Connections and Setup
Performance Series User’s Guide 24
Note: Ensure the media roll turns freely. There should be 0.8mm to 1.5mm clearance
between the media adjustment levers and the media roll.
8. Rotate the media guide adjustment knob counter clockwise to widen the guides
until they are set slightly wider than the width of the media.
Figure: 3 - 7 Media Guide Adjustment Knob
9. Route the media under the bouncer and into the media guides.
Figure: 3 - 8 Media Guides
Media Guides
33. Connections and Setup | 3
25 Performance Series User’s Guide
10.Press the pinch roller knob and slide the media 0.25 inches beyond the pinch roller.
Figure: 3 - 9 Pinch Roller
11. Rotate the media guide adjustment knob clockwise to tighten the guides.
Note: Ensure the guides are neither too tight nor too loose on the media or print quality
will be affected.
Figure: 3 - 10 Tighten Media Guide Adjustment Knob
Pinch Roller Knob Pinch Roller
34. 3 | Connections and Setup
Performance Series User’s Guide 26
12.Rotate the latch lever counter-clockwise until the printhead mechanism is locked.
Figure: 3 - 11 Lock the Printhead Mechanism
Note: If the media has been installed properly and read by the autoloading sensor, it
should automatically feed under the printhead once the printhead carriage assembly has
been latched and locked. If the media does not automatically load, unlatch the printhead
assembly and manually feed the media under the printhead. Upon locking the printhead,
it would be beneficial to both feed the media by selecting the Feed button on the main
menu to properly set the next label and perform a Paper Calibration.
13.Set the Top-of-Form sensor
Note: Refer to the section called “Top-of-Form Sensor”. Setting the top-of-form sensor to
read specific media characteristics is done in the control panel.
35. Connections and Setup | 3
27 Performance Series User’s Guide
Optional Media Hub Overview
Figure: 3 - 12 Media Hub Layout from Top
Media Specifications
Media core size:
• 3” (76.199 mm) standard
• 1” (25.4 mm) optional
• 1.5” (38.099 mm) optional
Media roll diameter:
• Maximum - 8”
Media roll width:
• Maximum - 4.65”
Media thickness:
• .003” to 0.01” (the p1120n can accept media thickness of up to 0.020”)
1
2
3
4
5
1. Media hub adjustment channels
2. Media hub adjustment lever
3. Hub adjustment slots
4. Media hub
5. Core holders
36. 3 | Connections and Setup
Performance Series User’s Guide 28
Media dimensions:
• Minimum specifications - 0.5” H x 1” W
Note: Ensure there is no tape or adhesive residue on the media roll.
Installing Media on the Media Hub
1. Open the media cover.
2. Press the media hub adjustment lever and pull the media hanger outward using the
handle.
Figure: 3 - 13 Media installation
3. Hold the media hub adjustment lever and place the media core on the core holders.
Media Hub
Adjustment
Lever
Hub
Handle
37. Connections and Setup | 3
29 Performance Series User’s Guide
4. Slide the media hub inward using the handle and release the hub adjustment lever
once the media is supported.
Figure: 3 - 14 Media Installation
5. Route the media under the bouncer and into the media guides.
Figure: 3 - 15 Media Guide
Media Guide
Bouncer
Media
Guide
38. 3 | Connections and Setup
Performance Series User’s Guide 30
6. Press the pinch roller knob and slide the media .25 inches beyond the pinch roller.
Figure: 3 - 16 Pinch Roller View from Top
7. While pressing the pinch roller knob, rotate the media guide adjustment wheel until
the media guide touches the media on both sides.
Caution: Ensure the media guides are neither too tight nor too loose or print quality will
be affected and feed issues may develop.
Pinch Roller Knob Pinch Roller
39. Connections and Setup | 3
31 Performance Series User’s Guide
Note: To loosen the media guides, rotate the media guide adjustment wheel counter-
clockwise. To tighten, rotate the adjustment wheel clockwise.
Figure: 3 - 17 Media Guide Adjustment Wheel
Note: The factory default media width is set to 4 inches.
40. 3 | Connections and Setup
Performance Series User’s Guide 32
Installing Ribbon
For thermal transfer printing, ribbon must be installed. The ribbon should be slightly
wider than the print media being used to ensure proper coverage.
1. Open the media cover.
2. Rotate the printhead latch lever clockwise to unlock and raise the printhead
carriage assembly.
Figure: 3 - 18 Printhead Latch Lever
3. Slide the ribbon core over the ribbon supply hub until the core is centered on the
hub.
41. Connections and Setup | 3
33 Performance Series User’s Guide
Note: Only use ribbon with a 1” diameter core.
Figure: 3 - 19 Install Ribbon
4. Route the ribbon between the ribbon cam roller and the green top-of-form
adjustment lever.
Note: The printer supports both coated side in (CSI) and coated side out (CSO). Ensure
the ink side faces the media.
Note: See the Menu section for information on setting the printer to run inside or outside
ink.
Ribbon Supply Hub
42. 3 | Connections and Setup
Performance Series User’s Guide 34
Caution: Do not route the ribbon under the top-of-form sensor.
Figure: 3 - 20 Route Ribbon (Inside ink ribbon is shown)
Cam Roller
Top-of-Form
Sensor Adjustment
Inside Ink Shown
Lever
43. Connections and Setup | 3
35 Performance Series User’s Guide
5. Route the ribbon under the printhead, over the ribbon shield and clockwise around
the ribbon rewinder hub.
Figure: 3 - 21 Route to Ribbon Rewinder Hub
Note: Roll the ribbon around the ribbon rewinder hub at least five (5) times to ensure it
will stay in position.
6. Ensure the thermal transfer option is selected in the control panel.
7. Set the thermal transfer option to CSI or CSO depending on the ribbon type.
Note: See the menu section for more information about the printer settings.
44. 3 | Connections and Setup
Performance Series User’s Guide 36
8. Rotate the printhead carriage assembly counter-clockwise until it latches.
Figure: 3 - 22 Latch the Printhead Carriage Assembly
9. Rotate the printhead latch lever counter-clockwise to lock the printhead carriage.
Note: Ensure the printhead latch lever has locked the printhead mechanism before
printing or the printer will enter a no-print condition.
Note: When removing the ribbon from the ribbon rewinder hub, grasp the center of the
ribbon, squeeze tightly and pull outward away from the rewinder hub. The rewinder hub
will collapse slightly allowing the used ribbon to slide off.
45. Connections and Setup | 3
37 Performance Series User’s Guide
Configuring Media and Ribbon Settings
Once the media and ribbon have been loaded, the print parameters should be set to
match the type of media and ribbon being used. This will ensure optimal print quality.
Once set, the parameters will not need to be set again unless the media or ribbon types
are changed.
Using Media and Ribbon IDs
Media and ribbons supplied by Datamax-O’Neil and other vendors may have up to an
eight (8) digit media ID and ribbon ID assigned. These codes may be created in the
Utility menu and then selected from Media menu via the printer’s front panel. All relevant
print parameters will be automatically configured.
1. Select Menu > Basic > Media > Media ID.
2. Using the up and down arrows, select the appropriate Paper ID. Note: No Media
IDs are provided by the factory.
3. To select the Ribbon ID, navigate to tab 2 and use the scroll arrows to highlight and
select the appropriate Ribbon ID.
4. Select the Home button.
5. After selecting the Home button, select the green Accept button to again confirm
your selection or the red Reject button to cancel the changes.
Note: Although using media and ribbon IDs usually produce very good results, minor
adjustments may be required. Refer to the section titled Adjusting Media and Ribbon
Settings.
Selecting Media and Ribbon Types
If media and ribbon IDs are not known, the media and ribbon types may be selected
manually.
1. Select Menu > Basic > Media > Select Type.
2. Using the up and down arrows, select your paper type.
Note: If the paper type is not known, either select Coated Direct Thermal for direct
thermal printing or select Coated Thermal Transfer for printing with a ribbon.
3. Tab to the Ribbon screen.
4. Using the up and down arrow, select your ribbon type.
Note: If the ribbon type is not known, select Wax to start. This selection can always be
changed if required.
5. Tab to the Settings screen.
46. 3 | Connections and Setup
Performance Series User’s Guide 38
6. Select the Paper Sensor Type button until your paper type appears. The options
are as follows:
• Gap
• Mark on Top
• Mark on Bottom
• Notch
• Continuous
Note: For more information, refer to the section “Top-of-Form Sensor.”
7. Select the Paper Sensor Side button until the correct option appears. The options
are as follows:
• Outside
• Inside
Note: For more information, refer to the section “Top-of-Form Sensor.”
8. Select the Ribbon Mode button until the correct option appears. The options are as
follows:
• None
• Coated In (CSI)
• Coated Out (CSO)
Note: For more information, refer to the section “Top-of-Form Sensor.”
Note: CSI ribbon (shiny side facing outward) should be installed where the ribbon
unwinds in a counter-clockwise direction. CSO ribbon (dull side facing outward) should
be installed where the ribbon unwinds in a clockwise direction. If these settings do not
match the ribbon type being used, the ribbon supply hub will turn in the wrong direction.
Setting the Media and Ribbon Parameters Manually (Advanced)
There are times when all print parameters must be set manually. This can happen when
a new or specialized media or ribbon are being used. This advanced procedure will use
the Custom Manual utility.
Note: Some values may be grayed-out, meaning they are automatically set by default.
To change these values, select the Auto button next to the value field and then select the
green Accept button to confirm your choice to change to manual mode.
Note: Please see the Menu section for more information.
1. Select Menu > Advanced > Media.
2. Select the Paper Sensor Type field until the correct paper type appears. The
options are as follows:
47. Connections and Setup | 3
39 Performance Series User’s Guide
• Gap
• Mark on Top
• Mark on Bottom
• Notch
• Continuous
3. Select the Paper Sensor Side field until the correct option appears. The options
are as follows:
• Outside
• Inside
4. Select the Ribbon Mode field until the correct option appears. The options are as
follows:
• None - for direct thermal printing
• Coated In - for thermal transfer printing
• Coated Out - for thermal transfer printing
5. Tab to the next screen and enter values for Heat and Heat Balance.
6. Tab to the next screen and enter values for Head Pressure and Rewinder
Tension.
7. Tab to the next screen and enter values for Ribbon Tension Front and Ribbon
Tension Rear.
8. Tab to the next screen and enter a value for Ribbon Low Diameter.
9. Select the Home button and select the green Accept button to confirm the settings.
Load a Saved Media File
For media and ribbon settings that are frequently used, media setup files can be saved to
the printer’s internal memory for easy access. For more information on saving the user
setup files, refer to the section titled Setups from the Tools > User Files menu section.
To select an internally saved media setup file, perform the following steps:
1. Select Menu > Basic > Media > User Media.
2. Using the up and down arrows, select the appropriate Internal Media Setup File.
3. Select the green Accept button and confirm the settings.
48. 3 | Connections and Setup
Performance Series User’s Guide 40
Optional Rewinder
The rewinder is designed to rewind in either direction but the direction must be set
through the menu.
Note: Either the peel plate or the rewinder plate must be installed.
Installation of Media
1. Route the media through the platen carriage assembly.
Note: Follow the instructions for the installed media hanger.
2. Route the media under the platen carriage and around the rewinder shaft.
3. Remove the metal clasp and wind the media around the rewinder shaft in the
desired direction.
Figure: 3 - 23 Rewinder
4. Insert the edge of the media into one of the two grooves on the rewinder shaft.
Counter Clockwise
Clockwise
Metal Clasp
49. Connections and Setup | 3
41 Performance Series User’s Guide
Note: For thicker labels, remove the label from the backing and insert the backing into
the groove.
Figure: 3 - 24 Media Rewinder
Note: Be sure to center align the paper on the rewinder shaft. Otherwise, the paper will
not rewind tightly.
5. Reinstall the metal clasp into the grooves.
Perform the following steps to set the rewinder direction:
1. Select Menu > Basic > Printer Mode.
2. Select the rewinder direction.
Note: Upon exiting the utility, a prompt will ask the user to accept the changes or reject
them.
Note: If the rewinder is enabled and the Auto Present Distance is set, then the printer
present distance will be set to zero (0) to avoid unnecessary backing up.
50. 3 | Connections and Setup
Performance Series User’s Guide 42
Note: If the rewinder is enabled, the Auto Present Distance set, and the printer in
Prompt or Applicator mode, then the actual printer present distance will be set to work
with the peel mechanism.
Top-of-Form Sensor
This printer is designed to use several types of media. The top-of-form sensor can read
media characteristics from the center to the left inside edge (viewing from the front of the
printer). Setting the top-of-form sensor to read specific media characteristics is done in
the control panel.
Media Types Supported
There are five paper types that are supported. These include gap, mark on top, mark on
bottom, notch and continuous.
The following are illustrations of the types of supported media but not every supported
media is illustrated. Please contact your reseller for assistance in selecting the
appropriate media for the printer.
Figure: 3 - 25 Gap Example
51. Connections and Setup | 3
43 Performance Series User’s Guide
Figure: 3 - 26 Notch Example
Note: The use of Notch paper disables the Out of Paper warning.
52. 3 | Connections and Setup
Performance Series User’s Guide 44
Figure: 3 - 27 Mark on Top Example
Figure: 3 - 28 Mark on Bottom Example
Figure: 3 - 29 None
Note: For continuous paper, excessive vertical adjustment may push the print into the
next label. This mode will create labels with a 1/8” gap between them.
53. Connections and Setup | 3
45 Performance Series User’s Guide
Setting the Top of Form Sensor
The top of form sensor enables the printer to determine where the print should begin and
end. Once the appropriate media has been loaded, the media type can be entered
manually into the control panel.
1. Select Menu > Basic > Media from the control panel.
2. Select Select Type.
3. Select the paper and ribbon type.
4. Select Paper Sensor Type.
5. Select the paper sensor side, either inside or outside, that correlates with the type of
media being used.
Note: For example, media types with marks in the middle of the media, select Outside.
Note: The LED of the selected sensor will illuminate.
6. Unlock and release the printhead carriage assembly allowing it to open.
7. Using the adjustment lever, slide the top-of-form sensor so the appropriate LED-lit
sensor pod is centered over the mark, notch or gap that was selected.
Figure: 3 - 30 Example of Top-of-Form Sensor Adjustment on “Mark on Top” media
Mark Inside Sensor Pod
Outside Sensor Pod
Lever
Top-of-Form
Adjustment
54. 3 | Connections and Setup
Performance Series User’s Guide 46
Note: For illustration purposes, the image of the printhead carriage assembly was
removed in the image above. The LED sensor pods can be viewed from the front of the
printer, under the printhead carriage assembly. The active sensor pod is lit by an LED.
Note: If the wrong pod is active for your media type, check your settings.
8. Close and lock the printhead carriage assembly.
55. Connections and Setup | 3
47 Performance Series User’s Guide
Removing Ribbon Wrinkle
1. Center the supply ribbon core so the ribbon overlaps the media equally on both
sides.
2. Verify there are no folds or creases in the ribbon.
3. Adjust the front ribbon shield to the middle position of the mounting slot.
Figure: 3 - 31 Ribbon Shield
4. Set the printer to print ten (10) consecutive Quality Labels from the Test menu.
a. Select Menu > Test > Test Labels.
b. Enter 10 in the Select Count field.
5. Print the labels.
6. Check for ripples drifting left or right in the ribbon between the ribbon supply and the
cam roller.
Front Ribbon Shield
Ribbon Shield
Adjustment Screws
56. 3 | Connections and Setup
Performance Series User’s Guide 48
Note: If the ripples are vertically straight, advance to step 12 to adjust the ribbon shield.
Figure: 3 - 32 Supply Side Inspection
7. If excessive ripples exist, loosen the 3mm cam roller hex head screw enough to
allow the cam roller to spin.
Figure: 3 - 33 Cam Roller
8. Turn the cam roller adjuster until the ripples are either gone or are vertical.
Cam Roller
Screw
Cam Roller
Adjuster
57. Connections and Setup | 3
49 Performance Series User’s Guide
Note: The ripples must never drift left or right.
9. Tighten the cam roller screw.
10.Print ten (10) Quality Labels from the test menu.
Note: If wrinkles still appear continue with the adjustment procedure.
11. Loosen the ribbon shield adjustment screws.
12.While printing test labels, slowly adjust the lower shield until the ribbon tension is
constant from left to right and the wrinkles disappear.
Note: Adjust the ribbon shield by adding tension to the side with wrinkling or light print.
Note: Adjustment should eliminate side-to-side wrinkles.
Manual Head Pressure Adjustment (p1115 only)
The printer calculates the ribbon and media settings and then suggests the optimal
printhead pressure. If the current printhead pressure setting is different from the
suggested setting, a prompt will appear on the menu screen suggesting that the head
pressure should be adjusted.
1. Select Info > Extended Status from the home screen.
2. Rotate the printhead latch lever clockwise to unlock the printhead carriage
assembly.
Note: The printhead carriage assembly should be unlocked but not released.
Figure: 3 - 34 Unlock the Printhead Carriage Assembly
58. 3 | Connections and Setup
Performance Series User’s Guide 50
3. Rotate the printhead pressure adjustment wheel until the head pressure is set to the
appropriate setting.
Note: Rotating the wheel clockwise increases the pressure while rotating the wheel
counter-clockwise decreases the pressure.
Figure: 3 - 35 Printhead Pressure Adjustment Wheel - View from Top
4. Rotate the printhead carriage assembly counter-clockwise until it latches.
Figure: 3 - 36 Latch the Printhead Carriage Assembly
59. Connections and Setup | 3
51 Performance Series User’s Guide
Installing Cutter and Tray
Warning: To prevent serious injury, never place a finger or object other than media near
the cutter mechanism.
Caution: Never cut paper or media in an area where adhesives exist. Doing so will
damage the cutter and void the manufacturer’s warranty.
Caution: The media cover will not close with both the cutter and present sensor installed
at the same time for those printers with a present sensor installed in the cover..
Caution: The printer must be powered off and disconnected from AC utility power prior
to the cutter installation.
The cutter and cutting tray are available options that must be installed after receiving the
printer.
Cutter
Perform the following procedure to install the cutter.
Note: The printer and the cutter tray must be on the same level surface.
1. Power off the printer and disconnect it from utility power.
2. Remove the lower cover from the printer.
Figure: 3 - 37 Lower Cover
Note: The printer cover can be removed by carefully pulling the bottom of the cover.
60. 3 | Connections and Setup
Performance Series User’s Guide 52
3. Loosen and remove the media plate thumbscrew and the media plate.
Figure: 3 - 38 Remove Media Plate
Note: Retain the thumbscrew for cutter installation.
4. Align the cutter with the power/data connector and install the thumbscrew to secure
it to the platen carriage assembly.
Figure: 3 - 39 Cutter Installation
Power/Data
Connector
61. Connections and Setup | 3
53 Performance Series User’s Guide
5. Rotate the cutter until it magnetically locks into place.
6. Activate the cutter option in the Options menu by selecting Menu > Advanced >
Printer > Options > Cutter.
Note: Feed a label through the printer and observe the cut distance to ensure it cuts on
the gap. If it cuts on the label, adjust your Cut Distance Adjust settings in the
Adjustments menu. Select Menu > Advanced > Adjustments > Cut Distance Adjust.
Note: A negative value moves the cut line toward the current label being printed. A
positive value moves the cut line toward the next label to be printed.
Cutter Tray
The cutter tray collects labels and media after they have been cut. The tray may be
installed before or after the installation of the cutter.
1. Place the tray mounting hooks into the baseplate slots.
Note: For a clearer illustration, the cutter has been removed from the illustration below.
Figure: 3 - 40 Cutter Tray Installation
Mounting Hooks
Baseplate
Slots
62. 3 | Connections and Setup
Performance Series User’s Guide 54
Setting Up the Cutter Tray
The cutter tray assembly is adjustable to fit various label lengths from 2” (50.8 mm) to 6”
(152.4 mm) and widths up to 4.65” (118.1 mm) for the p1115, p1115s, p1120 and p1125.
The maximum label width for the p1725 is 7.1” (180.34 mm).
1. Loosen the tray lock thumbscrews.
Figure: 3 - 41 Tray Lock Thumbscrews
63. Connections and Setup | 3
55 Performance Series User’s Guide
2. Loosen the height adjustment thumbscrews.
Figure: 3 - 42 Height Adjustment Thumbscrews
3. Rotate the tray shelf to the desired position and secure all four thumbscrews that
were previously loosened.
Figure: 3 - 43 Tray Shelf Adjustment
64. 3 | Connections and Setup
Performance Series User’s Guide 56
4. Loosen the length guide thumbscrew.
Figure: 3 - 44 Length Guide
5. Adjust the length guide to the desired position and then secure the thumbscrew.
Figure: 3 - 45 Length Guide Adjusment
65. Connections and Setup | 3
57 Performance Series User’s Guide
Upward-Facing Present Sensor
Note: The upward-facing present sensor is not an available option for the p1725
Perform the following procedure for installing the upward-facing present sensor.
1. Power off the printer and disconnect it from utility power.
2. Remove the lower cover from the printer.
Figure: 3 - 46 Lower Cover
Note: The printer cover can be removed by carefully pulling the bottom of the cover.
3. Loosen and remove the media plate thumbscrew and the media plate.
Figure: 3 - 47 Remove Media Plate
66. 3 | Connections and Setup
Performance Series User’s Guide 58
Note: Retain the thumbscrew for future re-installation of the media plate.
4. Align the present sensor with the power/data connector and tighten the captive
screw to secure it to the platen carriage assembly.
Figure: 3 - 48 Present Sensor Installation
5. Close the present sensor until it magnetically locks into place.
6. Activate the present sensor option in the Options menu by selecting Menu > Basic
> Printer Mode > Present Sensor Enable.
Captive Screw
67. Connections and Setup | 3
59 Performance Series User’s Guide
Print Driver Installation
Overview
This installation should be executed only on a computer where a pw Series printer driver
is not currently installed or one that the driver have been completely removed.
The Windows driver is located on the Accessories CD-ROM included with the printer. For
the latest version please visit our web site at http://www.datamax-oneil.com
Installing the Windows Driver:
1. Place the Accessories CD-ROM included with the printer into the computers CD-
ROM drive. Once the CD-ROM starts select your printer model then “Install Driver”
from the menu. Follow the instructions on the screen to install.
If the driver was downloaded from our website, simply double click the downloaded
“.exe” file to launch the installation.
2. Check the “Remove printer drivers” radio button then click
‘Next’. If this option is not available skip to Step 6.
3. On the next screen check the “Remove printers” radio
button then click ‘Next’.
4. Browse the list of installed printers, if any “Workstation” or
“Performance” printers are listed check the corresponding
check boxes and click ‘Next’ to remove the installed
printers.
5. The next screen will show a summary of items to be
removed, click ‘Finish’ to complete the removal process.
Once complete return to the main screen to install the new
driver.
68. 3 | Connections and Setup
Performance Series User’s Guide 60
6. Check the “Install printer drivers” radio button then click
‘Next’ and follow the on-screen instructions to install the
driver.
7. When prompted, select your printer from the list, (i.e.
Datamax-O’Neil p1xxx). Continue to follow the on-screen
instructions to install the driver.
Important Notes:
The Windows driver functions the same as any other Windows printer. While built-in help
files provide information on all settings, there are some important setting parameters that
should be observed for trouble free printing:
The Windows application software used to create the label format will likely have a "Page
Setup" screen. This will also need to match the size of the label you are using
Page Setup Tab: Stock
It is important that the Stock setting
matches the size of the label you are
using. If you cannot find a match for your
label click New and enter the dimensions
of your label.
Options Tab: Print Speed & Printhead
Temperature
These two settings will have the greatest
effect on print quality. Some label stocks
will require more heat and slower print
speeds to generate a quality image.
69. 61 Performance Series User’s Guide
4 Menu System
Menu Overview
The printer is designed with a touchscreen display. Functions can be enabled and
disabled and settings can be changed through the on-screen menu. Press the buttons on
the screen with the light touch of a finger.
Caution: Do not touch the screen with excessive force or by using sharp objects. Doing
so will damage the touchscreen and may void the manufacturer’s warranty.
Layout of the Display
Navigation
The menu screens have buttons for advancing or returning to screens.
Back Button
The Back button provides the user with the option to return to a previous menu
screen.
Home Button
Selecting the Home button sends the user to the main screen.
Tabbed Browsing
Blue left and right arrow buttons are provided at the bottom right of the screen to
navigate tabbed menus. Select the right arrow to advance to the next tab or the left
arrow to return to the previous tab.
Scrolling
Some menu screens allow for scrolling. Select the appropriate up or down arrow.
Changing Values
Numeric values can be entered or changed by selecting the field and entering the
values using the numeric keypad. They can also be increased or decreased using
the subsequent plus or minus buttons.
Other menu options are changed by pressing the button until the appropriate
selection appears.
Page Return Button
The Page Return button allows the user to return to the last setup screen that was
exited after selecting the Home button.
70. 4 | Menu System
Performance Series User’s Guide 62
Three Button Panel
The printer may be placed in 3-button security mode which restricts the operator from
changing any settings or printing test labels. An administrator can access the printer
menu by pressing on the “Model ID” in the taskbar and entering the appropriate security
password. Once the password has been entered and accepted, the user will be allowed
access to the full home screen.
To return the menu to the 3-button security mode, select the “Model ID” again.
Home Screen
The home screen presents several options to the user.
Printer Status
The printer status area displays the state of the printer. These states include the
following:
• Ready - The printer is idle and ready to accept internal or external commands.
• Busy - Appears when printing or feeding paper.
• Fault - The printer has paused due to a fault condition.
• Warning - The printer has paused due to a warning indicator.
• Cooling Down - The printer has paused while it is cooling down.
• Waiting - The printer is blocked by the optional Applicator or Present Sensor.
• Configuration - The printer is connected to the Configuration Utility.
• Canceling - The printer is currently canceling a print job.
Printer
Status
Buttons
Date / Time
Operator Action
Fault Information
Model ID Connected Devices
Area
Area
and
Mode Indicators
71. Menu System | 4
63 Performance Series User’s Guide
Operator Action Area
Information about the current printer action will be displayed in this area. For example,
“Printing 1 of 3” might be displayed when printing the first of three labels for a print job.
Date / Time
The time and date may be toggled on by pressing the upper right corner of the display.
After pressing the blank area, the current date and time will be displayed on the screen.
Once the home button is pressed, a screen will appear asking the user if the date and
time will be displayed. Select the green Accept button to display the time or the red
Reject button to cancel.
Fault Information Area
Warnings and faults will be displayed in this area. Once the fault has been corrected, the
message will disappear.
Connected Devices
The symbol for devices connected to the USB host will be presented in this area.
Mode Indicators
The printer will display modes that have been activated. If options have been installed
but not enabled, they will not appear in this area of the display.
Information Button
By selecting the information button from the task bar, the following information can be
accessed. Select the Print button in the taskbar to print the information. Not all of the
information listed below is available for every printer.
• System Info
• Settings Report
• Network Report
• Extended Status
• Serial Report
• GPIO Report
• Fonts Report
Note: Selecting the up or down arrow will display additional information.
72. 4 | Menu System
Performance Series User’s Guide 64
1. System Information
The following will be displayed upon selection of the System Info button:
• Printer Model
• Printhead Model
• Firmware Version
• FPGA Version
• Ribbon Version
• Boot Version
• Board ID
• RAM Size
• Flash Size
• Printer Key
• Absolute Counter
• Printhead Counter
• Setup File
• Paper
• Ribbon
• Detected Options
2. Settings Report
The settings report provides information on the printer settings.
Media Settings
• Paper Sensor Type
• Paper Sensor Side
• Ribbon Mode
• Heat
• Heat Balance
• Head Pressure
• Rewinder Tension
• Ribbon Tension Front
• Ribbon Tension Rear
• Ribbon Low Diameter
73. Menu System | 4
65 Performance Series User’s Guide
Printer Settings
• Cutter Mode
• Cut by Count
• Rewinder Mode
• Present Sensor Enable
• Print Speed
• Feed Speed
• Reverse Speed
• Present Distance
• Error Sound
• Warning Sound
• Paper Low Warning
• Paper Out Warning
• Cover Open Warning
• Reprint on Error
• Present Timeout
• Pause Mode
Page Defaults Settings
• Print Length
• Print Width
• Vertical Offset
• Horizontal Offset
• Orientation
• Raster Mode
• Font Name (Number)
• Point Size
• Pitch Size
• Symbol Set
• Print Truncation
• Print on Gap/Mark
Auto Settings
74. 4 | Menu System
Performance Series User’s Guide 66
• Auto Load
• Auto Option Detect
• Auto Calibrate
• Auto Present Distance
• Auto Tension
• Auto Pressure
• Auto Speed Adjust
• Suggested Pressure
Adjustment Settings
• Present Distance Adjust
• Cut Distance Adjust
• Cutter Rotation Adjust
• Vertical Adjust
• Horizontal Adjust
• Head Pressure Adjust
• Rewinder Tension Adjust
• Ribbon Tension Front Adjust
• Ribbon Tension Rear Adjust
• Darkness
• Contrast
Calibration Settings
• Paper Threshold (for non-continuous sensor type)
• Gap/Mark Threshold (for non-continuous sensor type)
• TOF Gain (for non-continuous sensor type)
• Autoload Empty
• Autoload Current
3. Network Report
The Network Report option provides information about the network on which the printer
resides. The following information is available:
• Ethernet IP
• Ethernet Subnet Mask
75. Menu System | 4
67 Performance Series User’s Guide
• Ethernet Gateway
• Ethernet MAC
• Ethernet DHCP
• Wireless IP*
• Wireless Subnet Mask*
• Wireless Gateway*
• Wireless SSID*
• Wireless MAC*
• Wireless DHCP*
• Hostname
*Available only if the wireless option is installed.
4. Extended Status
The Extended Status option provides sensor information including:
• Head Temperature
• Head Voltage
• Head Pressure
• Ribbon Level
• Rewinder Level
• TOF Sensor
• Auto Load Sensor
• Session Label Count
Extended Status is also available when printing by pressing the icon in the mode
indicator area.
5. Serial Report
The serial report provides serial connectivity information including:
• Baud Rate
• Data Bits
• Stop Bits
• Parity
• Flow Control
76. 4 | Menu System
Performance Series User’s Guide 68
6. GPIO Report
The GPIO Report provides the following information:
• GPIO Mode
• Slew Speed
• Pulse Width
• Signal 1 - I/O, Function, Type
• Signal 2 - I/O, Function, Type
• Signal 3 - I/O, Function, Type
• Signal 4 - I/O, Function, Type
• Signal 5 - I/O, Function, Type
• Signal 6 - I/O, Function, Type
• Signal 7 - I/O, Function, Type
• Signal 8 - I/O, Function, Type
7. Fonts Report
The Fonts Report provides the font name and the font ID/typeface ID number. This
includes both the resident and user downloaded or imported fonts.
Note: The resident fonts are listed in the Appendix of this manual.
Note: It is the user’s responsibility to obtain the appropriate licenses for downloaded or
imported fonts.
Feed Button
Selecting the feed button will feed the media through the print mechanism one label at a
time.
77. Menu System | 4
69 Performance Series User’s Guide
Menu
The Menu button provides the user with access to the system settings and also allows
for the enabling of options. The Menu screen displays the following options:
• Basic
• User
• Advanced
• Tools
• Language
• Test
1. Basic
Selecting the Basic button allows for access to the basic settings. These include the
following:
• Printer Mode
• Media
• Print Adjust
Printer Mode
The printer is available with several options which are enabled or disabled via the Printer
screen. Three of the modes cannot happen concurrently so the highest priority mode will
take precedence. The order is as follows:
1. Pause Mode (High)
2. Present Sensor Enable (Medium)
3. Applicator Mode (Low)
a. Cutter Mode
The cutter supports the cutting of media into separate labels.
For printers with a print media cutter installed, select from the following Cutter Mode
options:
• Off
• Cut By Label
• Cut By Job
• Cut By Count
Cut By Count enables the user to specify the number of labels printed prior to being cut.
Select the Cut By Count field and enter the number of labels to be printed.
78. 4 | Menu System
Performance Series User’s Guide 70
b. Rewinder Mode
Rewinder Mode controls the operation of the powered internal label rewinder.
For printers with a print media rewinder installed, select from the following Rewinder
Mode options:
• Off
• Clockwise
• Counter Clockwise
c. Present Sensor
The Present Sensor option controls the on-demand dispensing of labels.
To enable or disable the installed Present Sensor option, select or deselect the
corresponding checkbox.
d. GPIO Mode
The GPIO Mode enables or disables the applicator function from the printer. For printers
with an applicator connected, select from the following settings:
• Off
• Custom
d. Pause Mode
The Pause Mode option allows the user to prompt for the next label.
To enable or disable the Pause Mode, select or deselect the corresponding checkbox.
Media
Selecting the media button allows the user to change the print media and ribbon settings.
The printer may automatically set up certain parameters once the paper and ribbon types
have been inputted either using the Media ID or manual entry.
a. Media ID
The user can qualify various media and ribbon types and has assign an ID value to them.
After pressing the Media ID button, ID values can be selected which will configure the
printer to the optimum print settings.
1. Using the up and down arrows, select the appropriate Paper ID.
2. If applicable, tab to the Ribbon ID page and use the up and down arrows to
highlight the appropriate value.
3. Select the Home button and select either the green Accept button or the Red reject
button.
79. Menu System | 4
71 Performance Series User’s Guide
b. User Media
If media setup files have been stored internally or on a USB mass storage device
connected to the USB host, the files can be selected from this interface.
Using the up and down buttons, highlight the file and then select the green check button.
Note: The first tab displays files that have been saved internally. The second tab
displays files from the mass storage device attached to the USB host. User files may be
printed by selecting the print button in the taskbar.
Note: Further details are available in the Advanced section of the menu. Please refer to
the Advanced section of the manual for more information.
c. Select Type
For print media types that have not been qualified by the printer manufacturer, the Select
Type option allows the user to manually enter the media and ribbon types. This will
configure the printer to the approximate print settings.
The interface has three tabs:
• Paper - Using the up and down arrows, highlight the appropriate paper to be used.
• Ribbon - Using the up and down arrows, highlight the appropriate ribbon to be
used.
• Settings - Choose the appropriate settings for your media and ribbon types.
Note: Fine adjustments to print settings may be required to improve print quality. The
Select Type utility is designed to approximate the print settings.
Paper Sensor Type
Print media contains distinctive characteristics and those characteristics must be
accounted for in the settings to ensure finding Top-of-Form.
Paper Sensor Side
The Top-of-Form Sensor has two sensor pods that can sense the distinguishing
characteristics of paper types. The pods are mounted on a slider; the inside sensor can
read characteristics on the right edge of the media while the outside sensor can read
characteristics in the center of the media. Please refer to the Top-of-Form adjustment
settings in the media installation section of the manual for more information on selecting
the appropriate settings.
Select from the following options:
80. 4 | Menu System
Performance Series User’s Guide 72
Table 1: Paper Sensor Options
Ribbon Mode
The Ribbon Mode option allows the user to enable and disable Ribbon Mode and notes
the type of ribbon being used.
Ribbon Mode has three settings:
• Coated In (CSI) - for thermal transfer printing
• Coated Out (CSO) - for thermal transfer printing
• None - for direct thermal printing
Print Adjust
The Print Adjust selection allows for the adjustments of both the darkness and the
contrast of print quality as well as horizontal and vertical adjustments.
Selecting the plus or minus buttons respectively increases or decreases the values.
Changes to the values may also be made by selecting the field and entering the
appropriate values using the numeric keypad. During printing the print adjust screen will
be available via an icon in the mode indicator area of the front display. When paused the
icon will be accessible via the home screen icon.
Note: Settings that use the word “Adjust” should be considered fine adjustments and are
not main settings.
a. Darkness
The darkness adjustment is set within the range of -20 to +20. To increase darkness,
adjust the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
Paper Sensor Type Paper Sensor Side
Gap Inside
Outside
Mark on Top Inside
Outside
Mark on Bottom Inside
Outside
Notch Inside
Outside
Continuous Inside
Outside
81. Menu System | 4
73 Performance Series User’s Guide
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red
Reject button.
b. Contrast
The contrast adjustment is set within the range of -10 to +10. To increase contrast, adjust
the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red
Reject Button.
c. Vertical Adjust
The vertical adjustment is set within the range of -100 to +100 dots. To move the image
down, adjust the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red
Reject button.
d. Horizontal Adjust
The horizontal adjustment is set within the range of -100 to +100 dots. To move the
image to the right, adjust the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red
Reject button.
2. User
The user button allows for the usage of custom labels and custom printer configurations
that are saved internally or saved to a memory stick inserted in the USB host.
User Labels
Custom user labels that have been saved internally or in a mass storage device may be
printed.
1. Select User Labels.
2. Select the file to be printed (internally or USB hosted).
3. Select the green Accept button.
4. Select the Print button to print the label.
82. 4 | Menu System
Performance Series User’s Guide 74
Note: Further details are available in the Advanced section of the menu. Please refer to
the Advanced section of the manual for more information.
User Setups
Printer configurations that have been saved internally or on a mass storage device
attached to the USB host may be accessed and implemented from this utility.
1. Select User Setups.
2. Select the internally hosted user setup file.
3. Select the green Accept button.
Note: Further details are available in the Advanced section of the menu. Please refer to
the Advanced section of the manual for more information.
3. Advanced
The Advanced button provides access to the advanced settings of the printer. These
settings include the following:
• Page Defaults
• Printer
• Media
• Comm (communications)
• Adjustments
Page Defaults
The following page parameters can be adjusted:
Table 2: Page Format Adjustments
Settings Values Ranges Default
Print Length .10 to 99.00 in. 4.00 in.
Print Width Refer to the
Overview section
to find your
specific model
4.00 in.
Vertical Offset .00 to 10.00 in 0.00 in
Horizontal Offset .00 to 4.00 in 0.00 in
83. Menu System | 4
75 Performance Series User’s Guide
Note: The default settings will be used if the print job does not directly specify the
settings.
Note: Most of these settings will affect the internal Quality Label from the Test menu.
Note: Rotating oversized images with Print Truncation enabled may result in truncating
the printout entirely.
Note: Setting the raster mode to transparent will allow for texts, barcodes and images
that support transparency to be copied onto the destination without the white regions
generally associated with images. Setting the raster mode to opaque allows for texts,
barcodes and images to be applied onto the destination with the white pixels from the
source. Generally, this is only notices when text, barcodes or images are placed on top
of each other.
Note: Print on Gap when enabled in Continuous paper mode eliminates simulated gap
between labels. In this mode, vertical adjustment can be used to control the skip space
size for different TOF types.
Note: Print Truncation takes precedence over Print on Gap.
Orientation Portrait
Landscape
Reverse Portrait
Reverse Landscape
Portrait
Raster Mode Transparent
Opaque
Opaque
Default Font Number (Please see Appendix A
for the appropriate values)
0 to 52 23 (Courier)
Default Symbol Set (Please see Appendix A
for the appropriate values)
[0] PC-8
Default Point Size 4.00 to 999.75 12.00
Default Pitch Size .44 to 99.99 10.00
Print Truncation Enabled
Disabled
Enabled
Print on Gap Enabled
Disabled
Disabled
Settings Values Ranges Default
84. 4 | Menu System
Performance Series User’s Guide 76
Printer
The following settings may be adjusted:
• Presentation
• Auto
• Speeds
• Alarms
• Options
• Set Defaults
a. Presentation
The following settings can be adjusted.
Table 3: Presentation Settings
Note: To manually change the Present Distance settings, select the Auto button to the
left of the value field and follow the instructions to enter and save the changes.
b. Auto
The printer has several Auto settings that can be enabled or disabled.
Table 4: Auto Settings
Presentation Values Ranges Default
Pause Mode Enable
Disable
Disable
Present Time Out 0 - 1000 s 0 (never)
Present Distance 0.00 - 4.00 Auto
Selection Values Default
Auto Load Enable
Disable
Enable
Auto Option Detect Enable
Disable
Enable
Auto Calibrate Enable
Disable
Enable
Auto Present Distance Enable
Disable
Enable
Auto Tension Enable
Disable
Enable
85. Menu System | 4
77 Performance Series User’s Guide
c. Speeds
The following settings may be adjusted:
• Print Speed
• Feed Speed
• Reverse Speed
Table 5: Speed Settings
d. Alarms
The following alarm settings may be adjusted.
• Error Sound (depending on option installed)
• Warning Sound (depending on option installed)
Table 6: Alarm Settings
Auto Pressure Enable
Disable
Enable
Auto Speed Adjust Enable
Disable
Enable
Speed Settings Speed Range (IPS)
Print Speed 2.0 - max speed; model dependent
(Increments of 0.5)
Feed Speed 2.0 - max speed; model dependent
(Increments of 0.5) or Auto
Reverse Speed 2.0 - max speed; model dependent
(Increments of 0.5) or Auto
Adjustments Options Default
Paper Low Warning True
False
False
Paper Out Warning True
False
True
Cover Open Warning True
False
True
Reprint on Error True
False
True
Selection Values Default
86. 4 | Menu System
Performance Series User’s Guide 78
e. Options
The following settings may be adjusted:
• Cutter - Controls the cutting action of the media.
• GPIO - Controls the application of labels.
• Present Sensor - Controls the “on-demand” dispensing of labels.
• Rewinder - Controls the operation of the powered internal label rewinder.
Cutter
The following settings may be adjusted for printers with the cutter option installed:
Table 7: Cutter Settings
Note: *A positive value rotates the blade further.
GPIO
The following settings may be adjusted for printers with the GPIO option installed:
Table 8: GPIO Settings
Adjustments Options Ranges Default
Cutter Mode Off
Cut By Label
Cut By Job
Cut By Count
Off
Cut By Count 1
Cut Distance Adjust -100 to 100 dots 0
Cut Rotation Adjust -10 to 10* 0
Adjustments Values Ranges Default
GPIO Mode Off
Custom
Off
Slew Speed 2 - 10 IPS 8 IPS
Pulse Width 1 - 2000 s 1000 s
87. Menu System | 4
79 Performance Series User’s Guide
I/O Configuration
Sig 1/2
Sig 3/4
Sig 5/6
Sig 7/8
Input
Output
Input
Output
Input
Output
Input
Output
Input
Input
Output
Output
Select Signal
Sig 1 None
Start of Print
Reprint
Slew
Pause
Start of Print
Sig 2 None
Start of Print
Reprint
Slew
Pause
Reprint
Sig 3 None
Start of Print
Reprint
Slew
Pause
Slew
Sig 4 Start of Print
Reprint
Slew
Pause
Pause
Adjustments Values Ranges Default
88. 4 | Menu System
Performance Series User’s Guide 80
Sig 5 End of Print
Data Ready
Media Low
Service
End of Print
Sig 6 End of Print
Data Ready
Media Low
Service
Data Ready
Sig 7 End of Print
Data Ready
Media Low
Service
Media Low
Sig 8 End of Print
Data Ready
Media Low
Service
Service
Signal Type
Sig 1 Low
High
Low Pulse
Hi Pulse
Low
Sig 2 Low
High
Low Pulse
Hi Pulse
Low
Sig 3 Low
High
Low Pulse
Hi Pulse
Low
Sig 4 Low
High
Low Pulse
Hi Pulse
Low
Adjustments Values Ranges Default
89. Menu System | 4
81 Performance Series User’s Guide
Present Sensor
The following settings may be adjusted for printers with the present sensor option
installed:
Table 9: Present Sensor Settings
Note: For small labels, present distance must be set to 0 to avoid becoming stuck during
backup.
Rewinder
The following settings may be adjusted for printers with the rewinder option
installed.
Sig 5 Low
High
Low Pulse
Hi Pulse
Low
Sig 6 Low
High
Low Pulse
Hi Pulse
Low
Sig 7 Low
High
Low Pulse
Hi Pulse
Low
Sig 8 Low
High
Low Pulse
Hi Pulse
Low
Present Sensor Settings Values Ranges Default
Present Sensor Enable
Disable
Disable
Present Distance Adjust -100 to 100 dots 0
Adjustments Values Ranges Default
90. 4 | Menu System
Performance Series User’s Guide 82
Table 10: Rewinder Settings
f. Set Defaults
The factory default settings for the printer setup can be reset. To reset to the default
settings, select Set Defaults. Confirm your selection by selecting the green Accept
button.
Note: If the current custom settings have not been saved but will be needed again, be
sure to save them with the User Files utility from the Tools menu before resetting to
defaults.
Media
Select Media to change the print media settings.
Table 11: Media Settings
Rewinder Settings Values Ranges Default
Rewinder Mode Off
Clockwise
Counter Clockwise
Off
Rewinder Tension Adjust -10 to 10 0
Media Settings Values Ranges Default
Paper Sensor Type Gap
Mark on Top
Mark on Bottom
Notch
Continuous
Gap
Paper Sensor Side Outside
Inside
Outside
Ribbon Mode Coated In
Coated Out
None
Coated In
Heat 1 to 30 5*
Heat Balance 1 to 10 8*
Head Pressure (Suggested) 1 to 10 7*
Rewinder Tension 1 to 20 12*
Ribbon Tension Front 1 to 30 20*
Ribbon Tension Rear 1 to 20 15*
91. Menu System | 4
83 Performance Series User’s Guide
Note: *These values may vary depending on the printer model.
Communications
Select Communications to change the communications settings.
a. Ethernet
The following Ethernet communications settings may be adjusted:
Table 12: Ethernet Communications Settings
Once the data has been entered, select the Home button and then select the green
Accept button to save the changes which will require a printer reboot.
If necessary, the user may return to the default settings by selecting General > Reset
Defaults > Ethernet.
b. Wireless
The following wireless settings may be set for printers with the wireless option installed:
Table 13: Wireless Settings
Ribbon Low Diameter 1.0 to 2.0 in. 1.5 in.
Functions Values Actions Default
DHCP Enabled
Disabled
Enabled
IP Address If DHCP is disabled, enter the
appropriate value
0.0.0.0
Subnet Mask If DHCP is disabled, enter the
appropriate value
0.0.0.0
Gateway If DHCP is disabled, enter the
appropriate value
0.0.0.0
Functions Values Actions Default
Wireless Enable Enabled
Disabled
Enabled
SSID Enter the appropriate SSID value 0.0.0.0
Wireless DHCP Enabled
Disabled
Enabled
IP Address Enter the appropriate value 0.0.0.0
Subnet Mask Enter the appropriate value 0.0.0.0
Media Settings Values Ranges Default
92. 4 | Menu System
Performance Series User’s Guide 84
To return to the default settings, select General > Reset Defaults > Wireless.
c. Serial
The following tabbed option settings may be adjusted for printers with the Serial Interface
option installed:
• Baud Rate - Sets the serial communications rate in bits per second
• Data Bits - Sets the word length
• Stop Bits - Sets the number of stop bits
• Parity - Sets the word parity
• Protocol - Sets the serial communications handshaking mechanism, software,
hardware or none.
Table 14: Serial Settings
Gateway Enter the appropriate value 0.0.0.0
Security None
WEP
WPA
WPA2
None
Password Enter the appropriate value
Show Password Enabled
Disabled
Disabled
Functions Values Ranges Default
Baud Rate 9600
19200
38400
57600
115200
115200 BPS
Databits 7
8
8
Stopbits 1
2
1
Parity None
Even
Odd
None
Functions Values Actions Default
93. Menu System | 4
85 Performance Series User’s Guide
To return to the default settings, select General > Reset Defaults > Serial.
d. General
Select from the following to change the General communications settings:
Services
The following services may be enabled or disabled:
• Enable Network Time Protocol
• Enable Webpages
• Enable SSH (SSH-2 is supported)
• Enable SNMP
• SNMP Trap IP
• Enable LPD
To print using the LPD service, connect from a host using the LPR port and the
queue name “lp”.
Table 15: Services
Webpages provide a printer configuration interface for the user. Users can view the
printer status, set printer parameters, print test labels and perform simple actions like
printer calibration and setting defaults.
To access the printer Webpages from a computer where the printer has been installed,
type the printer’s IP address into the Web browser URL field.
Note: The printer must be connected to the Ethernet.
Protocol None
Hardware
Software
Both
None
Services Default
Enable Network Time Protocol Disabled
Enable Webpages Enabled
Enable SSH Enabled
Enable SNMP Enabled
SNMP Trap IP 127.0.0.1
Enable LPD Enabled
Functions Values Ranges Default
94. 4 | Menu System
Performance Series User’s Guide 86
To find the IP address, select Info > Network Report and record the value for Ethernet
IP.
Note: The following Web browsers are supported:
• Internet Explorer (version 8 and higher)
• Firefox (version 13 and higher)
• Google Chrome (version 23 and higher)
Host Timeout
The Host Timeout refers to the print job timeout in seconds before moving on to
monitor other ports.
Table 16: Host Timeout
Reset Defaults
The Reset Defaults function allows the user to reset the communications to the
default settings.
To reset the communication settings to the factory default settings, select one of the
options and select the green Accept button to make the change.
• Ethernet
• Wireless
• Serial
Adjustments
Adjustments are considered fine adjustments and should not be considered main
settings. Select from the following settings to change the values:
Table 17: Adjustment Settings
Function Range Default
Host Timeout 1 to 300 seconds 1
Port Number 0 -65535 9100
Host Name Any String Printer model number followed
by the last 6 digits of the MAC
address. Ex: p1115_208CB7
Hex Transfer True/False False
Adjustment Settings Ranges Default
Darkness -20 to 20 0
Contrast -10 to 10 0
Vertical Adjust -100 to 100 0
Horizontal Adjust -100 to 100 0
95. Menu System | 4
87 Performance Series User’s Guide
Note: Narrow labels may slip during backup if the head pressure is set too high.
4. Tools
Select from the following options to adjust the appropriate settings:
• Calibrate
• Security
• Maintenance
• User Files
• Date/Time
Calibrate
The Calibrate settings include:
• Calibrate Sensors
• Calibrate Paper
• Calibrate Manually
• Calibrate Display
a. Calibrate Sensors
Select Calibrate Sensors to automatically calibrate the printer without print media.
Calibration includes changes to the following settings:
• Head Pressure (not applicable for the p1115)
• Auto Load Sensor
• Top-of-Form Sensor
Note: The print media must be removed and the printhead mechanism must be
unlatched for the Calibrate Sensors to properly calibrate the printer.
b. Calibrate Paper
When selecting Calibrate Paper, the paper is scanned to determine the top-of-form
media and top-of-form gap settings.
Head Pressure Adjust -5 to 5 0
Rewinder Tension Adjust -10 to 10 0
Ribbon Tension Front Adjust -10 to 10 0
Ribbon Tension Rear Adjust -10 to 10 0
Present Distance Adjust -100 to 100 0
Cut Distance Adjust -100 to 100 0
Adjustment Settings Ranges Default
96. 4 | Menu System
Performance Series User’s Guide 88
Upon selection, the printer will move the paper forward and backward over the gap or
mark. It may be helpful to place the identifying mark or notch just behind the TOF sensor
so that the sensor will go over the mark as the media progresses through the printer.
Calibrate Paper is intended to sample paper with the default size of 4” x 4”. If a 4” x 6”
label is used for calibration and the TOF sensor is placed just after the identifying mark or
notch, it may not calibrate properly because it is designed to move the paper only 4”.
Note: Print media must be properly installed in the printer for the Calibrate Paper
function.
Note: Manually selecting Calibrate Paper is not necessary if Auto Calibration is enabled.
However, it may help in calibrating more difficult media.
c. Calibrate Manually
Intended for advanced users, the calibrate manually section allows the user to manually
adjust the top-of-form sensor for specialized media.The TOF ADC Reading field displays
the current top-of-form sensor reading for the currently selected paper type and sensor
side.
The values for gain, paper threshold and gap/mark threshold are shown for the currently
selected paper type and sensor side as well. These values are typically set when auto
calibration is performed using the Calibrate Paper utility.
The capture feature allows the user to lift the printhead, and using the LED as a guide
place the paper under the sensor and capture the value. Then, moving the gap (media
backing) or mark under the sensor, the value can be captured.
When saving changes to a threshold, auto calibration is disabled to prevent over-writing
the new values when auto-loading. Performing Calibrate Paper will overwrite the
threshold values.
Select Calibrate Manually to change the following settings:
• Top-of-Form Gain
• Paper Threshold
• Gap/Mark Threshold
Table 18: Calibrate Manually Settings
d. Calibrate Display
Adjustment Settings Ranges
TOF Gain 1 to 31
Paper Threshold 0 to 255
Gap/Mark Threshold 0 to 255
97. Menu System | 4
89 Performance Series User’s Guide
Select Calibrate Display and then select either the green Accept button to continue or the
red Reject button. Upon selecting to continue, follow the on-screen directions to properly
calibrate the touchscreen display.
If the touchscreen display becomes unusable, the printer can be calibrated during power-
up as well. To calibrate during power-up, perform the following procedure beginning with
the printer powered off.
1. Press and hold the Reset button on the back of the printer.
2. Toggle the power switch to power-on the printer.
3. Continue to hold the Reset button for ten (10) seconds.
4. Follow the on-screen instructions to calibrate the display.
Note: Allow a few minutes for power-up to complete.
Security
The security settings may be adjusted. These adjustments include changing the
password as well as changing the security level.
To change the password, perform the following steps:
1. Select Change Password.
2. Enter the old password using the on-screen keyboard.
3. Select the green Accept button to accept the entry or the red Cancel button to reject
the entry.
4. Enter the new password and select either the green Accept button or the red
Cancel button.
5. Re-enter the new password and select either the green Accept button or the red
cancel button.
To change the security level, choose from the following options:
Table 19: Security Settings
Security Descriptions
Functions Options
Security Level Off
Secure
Secure All
3 Button Display
98. 4 | Menu System
Performance Series User’s Guide 90
• Secure - When the “Secure” option is selected, changes to the advanced settings
and user tools will require a password.
• Secure All - When the “Secure All” option is selected, changes to any settings will
require a password.
• 3 Button Display - When this option is selected, the three button display will be
enabled on the main panel. A password will be needed to access the menu again.
Note: The factory default password is the number “0.”
Note: By default, security should be disabled.
Remove Security
To remove security, select the lock icon to the right of the Change Password utility. Type
your password and then select the green Accept button. To confirm, select the green
Accept button.
Maintenance
To adjust the following Maintenance settings, select the Maintenance button. The
maintenance settings include:
• Cleaning
• Upgrade
• Odometers
a. Cleaning
Cleaning should be routinely performed. The maintenance alarm is set by the user in
thousands of inches.
Enter the desired maintenance reminder interval. Once a fault appears directing the user
to clean the printhead, insert a factory approved cleaning card under the printhead and
select Clean Now.
The Elapsed field displays the number of inches, in thousands, since the last cleaning.
Table 20: Maintenance Settings
b. Upgrade
The Upgrade function allows the user to upgrade the printer software. Insert a mass
storage device into the USB host with the appropriate file to be uploaded and then select
Upgrade.
Maintenance Settings Ranges Actions Default
Maintenance 0k to 1000k in. 0 (never)
Clean Now Select Clean Now
99. Menu System | 4
91 Performance Series User’s Guide
Do not turn off the printer during the process. Once the printer has been updated, it will
reboot. When the printer is back online, be sure to power-cycle the printer once more by
turning it off and then back on.
Note: Save all user files, labels and setups to a mass storage device connected to the
USB host prior to updating your printer. Files that are not saved may be lost during the
upgrade process.
Note: Upgrades may also be performed using the Configuration Utility.
c. Counters
The following Counter readings are viewed:
• Absolute
• Printhead
• User
Note: The printhead odometer will not display in this area.
To reset the user odometer, select the Reset User button.
User Files
The User Files utility allows the user to access files that are saved internally or saved to
a mass storage device.
a. Labels
Labels can be saved either internally or to a mass storage device. These labels can also
be printed from this utility. Labels stored on a mass storage device must be placed in a
directory called user_labels at the root (top) level of the storage device (e.g.
E:user_labels).
Note: Label names cannot contain a space character.
Print
The user can print label files that have been saved internally or saved to a mass
storage device attached to the USB host.
1. Select Print.
2. Using the scroll arrows, highlight the file to be printed.
Note: The first tab displayed in the interface reveals the files that have been saved
internally. Tab 2 displays the available files from the attached mass storage device.
3. Select the green Accept button.
4. Select the printer icon in the taskbar.
100. 4 | Menu System
Performance Series User’s Guide 92
Organize
User labels may be copied from a mass storage device to the internal memory or
from the internal memory to a mass storage device. They may also be deleted or
renamed from this utility.
a. Copy
1. Select Organize.
2. Using the scroll arrows, highlight the appropriate file.
3. Select the green Accept button to continue.
4. Select Copy.
5. Select the green accept button to copy the files between internal storage and the
USB mass storage device.
b. Delete
1. Select Organize.
2. Using the scroll arrows, highlight the appropriate file.
3. Select the green Accept button to continue.
4. Select Delete.
c. Rename
1. Select Organize.
2. Using the scroll arrows, highlight the appropriate file.
3. Select the green Accept button to continue.
4. Select Rename.
5. Confirm your selection by selecting the green Accept button.
6. Using the alpha-numeric keypad, enter a new name for the selected file.
7. Select the green Accept button to continue.
b. Media
The Media utility allows the user to copy, delete and rename media configuration files. It
also provides access to setup files stored internally or on a mass storage device
connected to the USB host. The user can also save the current media configuration
setup. Media configuration files that are stored on a mass storage device must be placed
in a directory called user_media at the root (top) level of the storage device (e.g.
E:user_media).
Note: Media names cannot contain a space character.
RN
101. Menu System | 4
93 Performance Series User’s Guide
The settings include the following:
• Media ID
• Ribbon ID
• Paper Sensor Side
• Paper Sensor Type
• Ribbon Mode
• Heat
• Heat Balance
• Head Pressure
• Rewinder Tension
• Ribbon Tension Front
• Ribbon Tension Rear
• Auto Tension
• Auto Pressure
• Print Speed
Organize
To copy, delete or rename a file to or from a mass storage device connected to the
USB host, perform the following steps:
a. Copy
1. Select Organize.
2. Using the scroll arrows, highlight the appropriate media configuration file.
3. Select the green Accept button to continue.
4. Select Copy.
5. Select the green Accept button to confirm.
b. Delete
1. Select Organize.
2. Using the scroll arrows, highlight the appropriate media configuration file.
3. Select the green Accept button to continue.
4. Select Delete.
5. Select the green Accept button to confirm.
c. Rename
RN