사토 WS4시리즈는 열전사(TT), 감열(DT) 두가지 모델로 구성된 데스크탑 바코드 프린터 입니다.
특히 가격대비 성능이 매우 우수하여 도소매 마켓, 아울렛 업종 및 병원에 많이 설치되어 사용중에 있습니다.
WS408DT
인쇄방식 : 감열
해상도 : 203 dpi (8 dots/mm)
인쇄속도 : 6ips(152.4mm/sec)
WS412DT
인쇄방식 : 감열
해상도 : 300 dpi (12 dots/mm)
인쇄속도 : 4ips(101.6mm/sec)
인쇄영역 (공통사항) :
폭 : 104mm(4.09”)
길이 : 999mm(39.33”)
사용 편리성
소형 풋 프린트 디자인
고속 처리량 (최대 6ips 프린트 속도)
USB를 통해 쉽게 펌웨어 다운로드
공구 없이 플래턴/헤드 교체 (DT 모델)
3색 컬러 상태 LED, 프린터 상태 식별이 쉬움
유연한 라벨 기능
300m 리본 수용
페이스 인 / 페이스 아웃 라벨 & 리본
조절 가능한 아이마크 센서
0.5”/1” 리본 코어
1”/1.5” 라벨 코어
향상된 네트워크 연결성
멀티 인터페이스 온보드
옵션형 블루투스 무선 LAN
IPv4/IPv6 지원
멀티 에뮬레이션 지원 (SZPL, SEPL, SDPL, SIPL)
일반사양
인쇄방식 :
WS408DT & WS412DT : 감열
프린트 모드 : 연속, 티어-오프, 디스펜서, 커터
인쇄 해상도 :
WS408DT : 203 dpi (8 dots/mm)
WS408DT : 203 dpi (8 dots/mm)
최대 인쇄 속도 :
WS408DT : 6ips(152.4mm/sec)
WS408DT : 6ips(152.4mm/sec)
최대 인쇄 영역 :
폭, mm (inch) : 104mm(4.09”)
길이, mm (inch) : 999mm(39.33”)
CPU : 32Bit RISC CPU(180MHz)
Memory : 16MB ROM, 32MB RAM
소모품 사양
센서 타입 : 아이마크 센서 (반사), 라벨 갭 센서 (투과형)
미디어 타입 : 롤 (연속, 다이-컷), 팬-폴드, 태그, 티켓
라벨 형태 :
롤 직경 : 최대: 127mm (5“), 외부 미디어 스탠드 최대: 203.2mm (8")
코어 직경 : 25.4mm(1.0”), 38.1mm(1.5”)
윈드 디렉션 : 페이스 인/페이스 아웃, 설정 변경 필요 없음
라벨 두께 : 0.06mm (0.002") ~ 0.19mm (0.007")
라벨 사이즈
연속모드;
DT 방식 :
길이 : 10~ 996mm (라이너 포함 13 ~ 999mm)
폭 : 25.4 ~ 115mm (라이너 포함 28.4 ~ 118mm)
티어-오프모드;
DT 방식 :
길이 : 25.4~ 996mm (라이너 포함 28.4 ~ 999mm)
폭 : 25.4 ~ 115mm (라이너 포함 28.4 ~ 118mm)
디스펜서 모드;
DT 방식 :
길이 : 25.4 ~ 152.4mm (라이너 포함 28.4 ~155.4mm)
폭 : 25.4 ~ 115mm (라이너 포함 28.4 ~ 118mm)
커터 모드;
DT 방식 :
길이 : 25.4 ~ 996mm (라이너 포함 28.4 ~ 999mm)
폭 : 25.4 ~ 115mm (라이너 포함 28.4 ~ 118mm)
리본 사이즈
길이 (TT) : 최대 : 300m (984') / DT : N/A
폭 : : 40 ~ 110 mm / Dt : N/A
코어 직경 : 12.7mm (0.5"), 25.4mm (1") /N/A
윈드 디렉션 : 페이스 인/페이스 아웃, 설정 변경 필요 없음 / N/A
인터페이스 특성 & 통합
스탠다드 인터페이스 : USB2.0 (Type B), Ethernet(IPv4/IPv6), RS232C(스탠다드 모델만)
인터페이스 옵션 : Wireless LAN (IEEE 802.11b/g/n), Bluetooth 2.1
외부 메모리 : USB Type A (펌웨어 다운로드)
원격 유지 보수 : SNMP Ver. 2
지원되는 프린터 프로토콜 : 스탠다드: SBPL(SATO 바코드 프린터 언어) 에뮬레이션 언어: SZPL, SEPL, SDPL, SIPL
드라이버 : Windows, Linux, Mac OS X, SAP Smart Forms
옵션 : 커터, 디스펜서, 무선 LAN, 블루투스, 외부 미디어 스탠드, 리얼 타임 클락 (팩토리 옵션)
운영 & 환경 특성
전기 요구 사항 : 범용 자동 범위 전원 공급 장치, 100-240VAC +/-10%, 50/60Hz
표준 & 인증 : EN60950-1, UL60950-1/CSA C22.2 No. 60950-1, RCM, CCC, KC, EAC, S-Mark
기관 승인 : cULus, CE Marking, FCC, TUV GS, ICES-003, RCM, CCC, KC, EAC, S-Mark
환경 :
5-40°C, 25-85% RH, 이슬이 맺히지 않는 환경
-20-60°C, 10-90% RH, 이슬이 맺히지 않는 환경
물리적 특성
크기 (DT) : 폭: 183.8mm (7.24”); 두께: 225.9mm (8.89”); 높이: 166.0mm (6.54”)
무게 (DT) : 1.74kg (3.8lbs)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
ICARvisions is a solutions based, global leader specializing in vehicle related hardware and software design, manufacture and deployment of Mobile Digital Video Recorders (MDVR), Mobile Network Video Recorders (MNVR) and Sensors, Cameras, Cables, and Accessories. Contact:lilac@icarvisions.com
사토 WS4시리즈는 열전사(TT), 감열(DT) 두가지 모델로 구성된 데스크탑 바코드 프린터 입니다.
특히 가격대비 성능이 매우 우수하여 도소매 마켓, 아울렛 업종 및 병원에 많이 설치되어 사용중에 있습니다.
WS408DT
인쇄방식 : 감열
해상도 : 203 dpi (8 dots/mm)
인쇄속도 : 6ips(152.4mm/sec)
WS412DT
인쇄방식 : 감열
해상도 : 300 dpi (12 dots/mm)
인쇄속도 : 4ips(101.6mm/sec)
인쇄영역 (공통사항) :
폭 : 104mm(4.09”)
길이 : 999mm(39.33”)
사용 편리성
소형 풋 프린트 디자인
고속 처리량 (최대 6ips 프린트 속도)
USB를 통해 쉽게 펌웨어 다운로드
공구 없이 플래턴/헤드 교체 (DT 모델)
3색 컬러 상태 LED, 프린터 상태 식별이 쉬움
유연한 라벨 기능
300m 리본 수용
페이스 인 / 페이스 아웃 라벨 & 리본
조절 가능한 아이마크 센서
0.5”/1” 리본 코어
1”/1.5” 라벨 코어
향상된 네트워크 연결성
멀티 인터페이스 온보드
옵션형 블루투스 무선 LAN
IPv4/IPv6 지원
멀티 에뮬레이션 지원 (SZPL, SEPL, SDPL, SIPL)
일반사양
인쇄방식 :
WS408DT & WS412DT : 감열
프린트 모드 : 연속, 티어-오프, 디스펜서, 커터
인쇄 해상도 :
WS408DT : 203 dpi (8 dots/mm)
WS408DT : 203 dpi (8 dots/mm)
최대 인쇄 속도 :
WS408DT : 6ips(152.4mm/sec)
WS408DT : 6ips(152.4mm/sec)
최대 인쇄 영역 :
폭, mm (inch) : 104mm(4.09”)
길이, mm (inch) : 999mm(39.33”)
CPU : 32Bit RISC CPU(180MHz)
Memory : 16MB ROM, 32MB RAM
소모품 사양
센서 타입 : 아이마크 센서 (반사), 라벨 갭 센서 (투과형)
미디어 타입 : 롤 (연속, 다이-컷), 팬-폴드, 태그, 티켓
라벨 형태 :
롤 직경 : 최대: 127mm (5“), 외부 미디어 스탠드 최대: 203.2mm (8")
코어 직경 : 25.4mm(1.0”), 38.1mm(1.5”)
윈드 디렉션 : 페이스 인/페이스 아웃, 설정 변경 필요 없음
라벨 두께 : 0.06mm (0.002") ~ 0.19mm (0.007")
라벨 사이즈
연속모드;
DT 방식 :
길이 : 10~ 996mm (라이너 포함 13 ~ 999mm)
폭 : 25.4 ~ 115mm (라이너 포함 28.4 ~ 118mm)
티어-오프모드;
DT 방식 :
길이 : 25.4~ 996mm (라이너 포함 28.4 ~ 999mm)
폭 : 25.4 ~ 115mm (라이너 포함 28.4 ~ 118mm)
디스펜서 모드;
DT 방식 :
길이 : 25.4 ~ 152.4mm (라이너 포함 28.4 ~155.4mm)
폭 : 25.4 ~ 115mm (라이너 포함 28.4 ~ 118mm)
커터 모드;
DT 방식 :
길이 : 25.4 ~ 996mm (라이너 포함 28.4 ~ 999mm)
폭 : 25.4 ~ 115mm (라이너 포함 28.4 ~ 118mm)
리본 사이즈
길이 (TT) : 최대 : 300m (984') / DT : N/A
폭 : : 40 ~ 110 mm / Dt : N/A
코어 직경 : 12.7mm (0.5"), 25.4mm (1") /N/A
윈드 디렉션 : 페이스 인/페이스 아웃, 설정 변경 필요 없음 / N/A
인터페이스 특성 & 통합
스탠다드 인터페이스 : USB2.0 (Type B), Ethernet(IPv4/IPv6), RS232C(스탠다드 모델만)
인터페이스 옵션 : Wireless LAN (IEEE 802.11b/g/n), Bluetooth 2.1
외부 메모리 : USB Type A (펌웨어 다운로드)
원격 유지 보수 : SNMP Ver. 2
지원되는 프린터 프로토콜 : 스탠다드: SBPL(SATO 바코드 프린터 언어) 에뮬레이션 언어: SZPL, SEPL, SDPL, SIPL
드라이버 : Windows, Linux, Mac OS X, SAP Smart Forms
옵션 : 커터, 디스펜서, 무선 LAN, 블루투스, 외부 미디어 스탠드, 리얼 타임 클락 (팩토리 옵션)
운영 & 환경 특성
전기 요구 사항 : 범용 자동 범위 전원 공급 장치, 100-240VAC +/-10%, 50/60Hz
표준 & 인증 : EN60950-1, UL60950-1/CSA C22.2 No. 60950-1, RCM, CCC, KC, EAC, S-Mark
기관 승인 : cULus, CE Marking, FCC, TUV GS, ICES-003, RCM, CCC, KC, EAC, S-Mark
환경 :
5-40°C, 25-85% RH, 이슬이 맺히지 않는 환경
-20-60°C, 10-90% RH, 이슬이 맺히지 않는 환경
물리적 특성
크기 (DT) : 폭: 183.8mm (7.24”); 두께: 225.9mm (8.89”); 높이: 166.0mm (6.54”)
무게 (DT) : 1.74kg (3.8lbs)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
ICARvisions is a solutions based, global leader specializing in vehicle related hardware and software design, manufacture and deployment of Mobile Digital Video Recorders (MDVR), Mobile Network Video Recorders (MNVR) and Sensors, Cameras, Cables, and Accessories. Contact:lilac@icarvisions.com
Chi tiết kỹ thuật máy pos BEETLE /Express
Nhà phân phối: Công ty TNHH Tầm Nhìn Toàn Cầu (Global Vision Co., Ltd.)
Địa chỉ : 456/57 Cao Thắng Nối Dài, Phường 12, Quận 10, Tp.Hồ Chí Minh
Tel : (84-8) 3868 0103 / (84-8) 3868 0104
Fax : (84-8) 3868 0105
Email:sales@globalvision.com.vn
Hotline: +84 916 590 468
URL: www.globalvision.com (Global Vision Co., Ltd.)
www.wincor.com.vn (Wincor-Nixdorf Việt Nam)
This is the user manual of Launch CReader 6001.
>> READ MORE: https://www.obdadvisor.com/launch-creader-3001-review/
Here is a detailed review of the scan tool based on my own experience, including:
- Compatibility
- Design and Specification
- Features and Functions
- Pros and Cons
Check it out to get the REVIEW and some NOTES about using this scanner.
A concise user guide for the 8928a/8030a Data video projectors from Dukane
For more than fifty years, Dukane’s Audio Visual Products Division has provided schools and businesses around the world with technology solutions that helped increase learning. With a network of trained professional dealers available to provide personal and localized sales support, Dukane is committed to meeting each customer’s particular needs.
For more information contact:
Delia Valdez
Dukane Customer Service Representative
Phone: 888-245-1966
Fax: (630) 584-5156
Emai; avsales@dukane.com
Website: www.Dukane.com/AV
For information on Dukane’s Innovative Convey Response system, go to
www.conveyclassrooms.com
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
아보패널PC ARBOR LYNC-712-1900G4 12.1인치 산업용패널PC 매뉴얼HION IT
아보 산업용 패널PC, LYNC-712-1900G4 는 12.1 인치 인텔 ® J1900 쿼드 코어 ™ 프로세서가 장착 된 산업용 패널 PC 입니다.
산업용 PC, LYNC-712-1900G4 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적 인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, LYNC-712-1900G4 패널 PC 는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적 인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
Fewer Cables, Fanless Design
12.1" 1024 x 768 XGA LCD Display w/ LED Backlight
Front Bezel with Completely Covered Membrane
Flush Front Panel, IP65-Compliant
Brightness Control Button
Outside-accessible Push-pull CFast Socket
Outside-accessible USB port with rubber cover on the front bezel
Serial Ports (RS-485), w/ Auto-flow Control
1 x MiniCard socket for WiFi module
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input with reverse protection
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory : 1 x 4GB DDR3L SO-DIMM memory module (installed)
LAN : 2 x Realtek® 8111E GbE controllers
Watchdog Timer : 1~255 levels reset
STORAGE
1st Device : 1 x outside-accessible CFast slot
2nd Device : 1 x 2.5” drive bay
AUDIO
Speaker : 2 x 1.5W speakers (optional)
LCD DISPLAY
Size/Type : 12.1" TFT LCD Panel
Max. Resolution : 1024 x 768, XGA
Max. Colors : 16.7M
Luminance : 350 cd/m²
Touch Screen : 5-wire Analog Resistive
View Angle (U/D/R/L) : 80°/80°/80°/80°
BUTTON & INDICATOR
Function Key : Brightness up/down, Screen on/off
LED Indicator ; Power on LED
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket
EXTERNAL I/O
Serial Ports : 4 x DB-9 connectors for COM1~4 (COM1 ~ COM4 are RS-232/485 configurable)
USB Ports :
4 x Type-A USB 2.0 ports (rear)
1 x Type-A USB 2.0 port with rubber cover on front bezel
LAN : 2 x RJ-45 GbE ports
DVI : 1 x DVI connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-75/100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension (W x H x D) : 325.88 x 258.86 x 44.00 mm (12.8” x 10.2” x 2.26”)
Weight (Net) : 2.2 kg (without VESA bracket)
ENVIRONMENT
Operating Temp. : -20 ~ 55ºC (-4 ~ 131°F)
Storage Temp. : -20 ~ 70°C (-4 ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 55°C (non-condensing)
Vibration : 5 ~ 500Hz, 2Grms X,Y,Z axis (with CFast/SSD)
Shock : Operating 20G, 11ms X,Y,Z axis (with CFast/SSD)
OS SUPPORT
Windows 7 / Windows 8.1 / Linux (Kernel: 3.1X)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Launch X431 PAD Supports 3G WIFI Without Inner printer
http://www.obdii365.com/wholesale/2013-new-design-multi-language-launch-x431-pad-auto-scanner.html
Factory Newest Version.
Configured with Windows Embedded Standard 7 OS, Pluggable DBScar connector.
With wireless (3G, Wi-Fi) and Wired Network, One-key update and vehicle diagnostic functions (via Bluetooth communication.
1. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.
2. The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).
3. The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.
4. A fantastic new function of the VCM 2 is its ability to communicate wirelessly with your laptop or computer without any hardware or software upgrades.
This allows technicians to work on vehicles remotely while the VCM II is connected directly to the vehicle.
5. The VCM II will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.
It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).
6. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.
7. The CFR replaces the Vehicle Data Recorder (VDR).
8. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing
intermittent problems.
http://www.obd2works.com/ford-vcm-ii-professional-scanner-p-1877.html
Launch X-431 pro mini english user manual launch pro mini x431Summer Liu
Launch X-431 pro mini english user manual launch pro mini x431
Link to shop:
http://www.360diag.com/launch-x431-pro-mini-with-bluetooth.html
Wholesale price:
whatsapp: +86 18898771612
싸이퍼랩 9700 윈도우즈 PDA (Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3), 산업용PDA는 혹독한 현장에 적합하도록 설계되었으며 2 배터리(옵션) 운영으로 24시간 운영이 가능합니다.
타사의 경쟁 모델보다 CPU 처리속도, 메모리, 배터리 방진, 방수등급 등이 우월하면서도 가격 경쟁력 또한 우수합니다.
다양한 스캔 엔진을 제공하며 현장에서 교체 가능하도록 설계되었습니다.
(1D, 2D 다중모드, 최대 15m 바코드 인식)
Extended Range Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 13.5˚ ± 0.7˚
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
Min. Distance : 2 in/ 5 cm (7.5 mil)
Max. Distance : 45 ft/ 9.1 m (100 mil retro-reflective)
Near/Far 2D Imager
Technology : Auto-focus 2D imager
Light source : Auto-adaptive illumination: 617 nm highly visible LEDs
Scan Angle : 14˚ (horizontal), 8.7˚ (vertical)
Print Contrast : Down to 40%
Ambient Lighting : From 0 to 100,000 lux
Min. Distance : 6 in/ 15 cm (10 mil)
Max. Distance : 50 ft/ 15 m (300mil)
Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 47˚±3˚(typical), 35˚±3˚(narrow)
Print Contrast : Minimum 20% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
DOF : 1 to 45 in. / 2.5 to 114.3 cm
2D Imager
Technology : 752 x 480 pixels
Light source : 625 ±5 nm LEDs
Scan Angle : 40˚ (horizontal), 25˚ (vertical)
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : Max 96,900 lux (sunlight)
DOF :
5 mil code39 1.4 in./5.3cm to 7.5 in./19.1 cm
100% UPC 1.6 in./4.1cm to 12 in./30.5cm
5 mil PDF417 2.8 in./7.1cm to 4.5 in./11.4cm
다양한 키패드 선택
30-Key 및 38-Key 뉴메릭 키패드와 각각 4개 및 10개의 기능키
특정 52-Key 알파 뉴메릭키로 VT220 / TN3270 / TN5250 시스템 터미널 에뮬레이션 제공
우연한 터치에 의한 키패드 입력 오류를 방지하기 위한 키간격 유지 및 인체공학적 디자인
유연하고 효율적인 무선통신 제공
CCXv4 인증 IEEE 802.11 a/b/g/n
Bluetooth® 통신 Class II, V2.1
Push-to-talk (무전기, 동보전송 기능)
장시간 사용을 위한 주요 대안
표준 3600 mAh 뱃더리 및 대용량 5400 mAh 뱃더리 제공
최소 13 시간 계속 운용 (20초당 1번 레이저 스캐닝시)
두가지 Windows® 플랫폼 지원
Window® CE 6.0
Windows® Embedded Handheld 6.5
Android 6.0 (모델 : 9700A)
블루투스 및 무선랜 지원거리
블루투스 : 가시거리내에서 50m 지원
802.11 b/g: 가시거리 내에서 300 m 지원
802.11 a: 가시거리 내에서 250 m 지원
PERFORMANCE
Operating system : Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3
CPU : TI OMAP 3730 1GHz
Memory : 4GB Nand FLASH / 512MB DDR SDRAM
Expansion : Micro SD slot with SDHC support
Operating power : Rechargeable 3.7V 3600 mAh / 5400 mAh Li-ion Battery
Working hours1 : 13 hours
Alert : 3 LED indicators (for RF, charging status and good reading) / Vibrator/ Speaker
Interface supported : USB, RS232
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Chi tiết kỹ thuật máy pos BEETLE /Express
Nhà phân phối: Công ty TNHH Tầm Nhìn Toàn Cầu (Global Vision Co., Ltd.)
Địa chỉ : 456/57 Cao Thắng Nối Dài, Phường 12, Quận 10, Tp.Hồ Chí Minh
Tel : (84-8) 3868 0103 / (84-8) 3868 0104
Fax : (84-8) 3868 0105
Email:sales@globalvision.com.vn
Hotline: +84 916 590 468
URL: www.globalvision.com (Global Vision Co., Ltd.)
www.wincor.com.vn (Wincor-Nixdorf Việt Nam)
This is the user manual of Launch CReader 6001.
>> READ MORE: https://www.obdadvisor.com/launch-creader-3001-review/
Here is a detailed review of the scan tool based on my own experience, including:
- Compatibility
- Design and Specification
- Features and Functions
- Pros and Cons
Check it out to get the REVIEW and some NOTES about using this scanner.
A concise user guide for the 8928a/8030a Data video projectors from Dukane
For more than fifty years, Dukane’s Audio Visual Products Division has provided schools and businesses around the world with technology solutions that helped increase learning. With a network of trained professional dealers available to provide personal and localized sales support, Dukane is committed to meeting each customer’s particular needs.
For more information contact:
Delia Valdez
Dukane Customer Service Representative
Phone: 888-245-1966
Fax: (630) 584-5156
Emai; avsales@dukane.com
Website: www.Dukane.com/AV
For information on Dukane’s Innovative Convey Response system, go to
www.conveyclassrooms.com
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
아보패널PC ARBOR LYNC-712-1900G4 12.1인치 산업용패널PC 매뉴얼HION IT
아보 산업용 패널PC, LYNC-712-1900G4 는 12.1 인치 인텔 ® J1900 쿼드 코어 ™ 프로세서가 장착 된 산업용 패널 PC 입니다.
산업용 PC, LYNC-712-1900G4 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적 인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, LYNC-712-1900G4 패널 PC 는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적 인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
Fewer Cables, Fanless Design
12.1" 1024 x 768 XGA LCD Display w/ LED Backlight
Front Bezel with Completely Covered Membrane
Flush Front Panel, IP65-Compliant
Brightness Control Button
Outside-accessible Push-pull CFast Socket
Outside-accessible USB port with rubber cover on the front bezel
Serial Ports (RS-485), w/ Auto-flow Control
1 x MiniCard socket for WiFi module
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input with reverse protection
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory : 1 x 4GB DDR3L SO-DIMM memory module (installed)
LAN : 2 x Realtek® 8111E GbE controllers
Watchdog Timer : 1~255 levels reset
STORAGE
1st Device : 1 x outside-accessible CFast slot
2nd Device : 1 x 2.5” drive bay
AUDIO
Speaker : 2 x 1.5W speakers (optional)
LCD DISPLAY
Size/Type : 12.1" TFT LCD Panel
Max. Resolution : 1024 x 768, XGA
Max. Colors : 16.7M
Luminance : 350 cd/m²
Touch Screen : 5-wire Analog Resistive
View Angle (U/D/R/L) : 80°/80°/80°/80°
BUTTON & INDICATOR
Function Key : Brightness up/down, Screen on/off
LED Indicator ; Power on LED
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket
EXTERNAL I/O
Serial Ports : 4 x DB-9 connectors for COM1~4 (COM1 ~ COM4 are RS-232/485 configurable)
USB Ports :
4 x Type-A USB 2.0 ports (rear)
1 x Type-A USB 2.0 port with rubber cover on front bezel
LAN : 2 x RJ-45 GbE ports
DVI : 1 x DVI connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-75/100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension (W x H x D) : 325.88 x 258.86 x 44.00 mm (12.8” x 10.2” x 2.26”)
Weight (Net) : 2.2 kg (without VESA bracket)
ENVIRONMENT
Operating Temp. : -20 ~ 55ºC (-4 ~ 131°F)
Storage Temp. : -20 ~ 70°C (-4 ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 55°C (non-condensing)
Vibration : 5 ~ 500Hz, 2Grms X,Y,Z axis (with CFast/SSD)
Shock : Operating 20G, 11ms X,Y,Z axis (with CFast/SSD)
OS SUPPORT
Windows 7 / Windows 8.1 / Linux (Kernel: 3.1X)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Launch X431 PAD Supports 3G WIFI Without Inner printer
http://www.obdii365.com/wholesale/2013-new-design-multi-language-launch-x431-pad-auto-scanner.html
Factory Newest Version.
Configured with Windows Embedded Standard 7 OS, Pluggable DBScar connector.
With wireless (3G, Wi-Fi) and Wired Network, One-key update and vehicle diagnostic functions (via Bluetooth communication.
1. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.
2. The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).
3. The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.
4. A fantastic new function of the VCM 2 is its ability to communicate wirelessly with your laptop or computer without any hardware or software upgrades.
This allows technicians to work on vehicles remotely while the VCM II is connected directly to the vehicle.
5. The VCM II will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.
It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).
6. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.
7. The CFR replaces the Vehicle Data Recorder (VDR).
8. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing
intermittent problems.
http://www.obd2works.com/ford-vcm-ii-professional-scanner-p-1877.html
Launch X-431 pro mini english user manual launch pro mini x431Summer Liu
Launch X-431 pro mini english user manual launch pro mini x431
Link to shop:
http://www.360diag.com/launch-x431-pro-mini-with-bluetooth.html
Wholesale price:
whatsapp: +86 18898771612
싸이퍼랩 9700 윈도우즈 PDA (Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3), 산업용PDA는 혹독한 현장에 적합하도록 설계되었으며 2 배터리(옵션) 운영으로 24시간 운영이 가능합니다.
타사의 경쟁 모델보다 CPU 처리속도, 메모리, 배터리 방진, 방수등급 등이 우월하면서도 가격 경쟁력 또한 우수합니다.
다양한 스캔 엔진을 제공하며 현장에서 교체 가능하도록 설계되었습니다.
(1D, 2D 다중모드, 최대 15m 바코드 인식)
Extended Range Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 13.5˚ ± 0.7˚
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
Min. Distance : 2 in/ 5 cm (7.5 mil)
Max. Distance : 45 ft/ 9.1 m (100 mil retro-reflective)
Near/Far 2D Imager
Technology : Auto-focus 2D imager
Light source : Auto-adaptive illumination: 617 nm highly visible LEDs
Scan Angle : 14˚ (horizontal), 8.7˚ (vertical)
Print Contrast : Down to 40%
Ambient Lighting : From 0 to 100,000 lux
Min. Distance : 6 in/ 15 cm (10 mil)
Max. Distance : 50 ft/ 15 m (300mil)
Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 47˚±3˚(typical), 35˚±3˚(narrow)
Print Contrast : Minimum 20% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
DOF : 1 to 45 in. / 2.5 to 114.3 cm
2D Imager
Technology : 752 x 480 pixels
Light source : 625 ±5 nm LEDs
Scan Angle : 40˚ (horizontal), 25˚ (vertical)
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : Max 96,900 lux (sunlight)
DOF :
5 mil code39 1.4 in./5.3cm to 7.5 in./19.1 cm
100% UPC 1.6 in./4.1cm to 12 in./30.5cm
5 mil PDF417 2.8 in./7.1cm to 4.5 in./11.4cm
다양한 키패드 선택
30-Key 및 38-Key 뉴메릭 키패드와 각각 4개 및 10개의 기능키
특정 52-Key 알파 뉴메릭키로 VT220 / TN3270 / TN5250 시스템 터미널 에뮬레이션 제공
우연한 터치에 의한 키패드 입력 오류를 방지하기 위한 키간격 유지 및 인체공학적 디자인
유연하고 효율적인 무선통신 제공
CCXv4 인증 IEEE 802.11 a/b/g/n
Bluetooth® 통신 Class II, V2.1
Push-to-talk (무전기, 동보전송 기능)
장시간 사용을 위한 주요 대안
표준 3600 mAh 뱃더리 및 대용량 5400 mAh 뱃더리 제공
최소 13 시간 계속 운용 (20초당 1번 레이저 스캐닝시)
두가지 Windows® 플랫폼 지원
Window® CE 6.0
Windows® Embedded Handheld 6.5
Android 6.0 (모델 : 9700A)
블루투스 및 무선랜 지원거리
블루투스 : 가시거리내에서 50m 지원
802.11 b/g: 가시거리 내에서 300 m 지원
802.11 a: 가시거리 내에서 250 m 지원
PERFORMANCE
Operating system : Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3
CPU : TI OMAP 3730 1GHz
Memory : 4GB Nand FLASH / 512MB DDR SDRAM
Expansion : Micro SD slot with SDHC support
Operating power : Rechargeable 3.7V 3600 mAh / 5400 mAh Li-ion Battery
Working hours1 : 13 hours
Alert : 3 LED indicators (for RF, charging status and good reading) / Vibrator/ Speaker
Interface supported : USB, RS232
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Concise User Guide for Dukane Ultra Short Throw Projectors
For more than fifty years, Dukane’s Audio Visual Products Division has provided schools and businesses around the world with technology solutions that helped increase learning. With a network of trained professional dealers available to provide personal and localized sales support, Dukane is committed to meeting each customer’s particular needs.
For more information contact:
Delia Valdez
Dukane Customer Service Representative
Phone: 888-245-1966
Fax: (630) 584-5156
Emai; avsales@dukane.com
Website: www.Dukane.com/AV
For information on Dukane’s Innovative Convey Response system, go to
www.conveyclassrooms.com
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
허니웰 3800r 산업용 바코드스캐너는 판독 범위가 뛰어나고 품질이 나쁜 바코드를 읽으며 탁월한 내구성을 자랑하는 가장 강력한 선형 이미저 입니다.
3800r 바코드스캐너는 13 밀 (mil) 바코드에 대해 24 인치 (610mm)의 판독 범위를 자랑하는 동급 최강의 제품입니다.
허니웰은 30년간의 바코드 판독 경험을 바탕으로 새로운 소프트웨어인 디지타이저로 저품질 바코드 판독문제를 해결하여 수동입력 작업시간을 줄였습니다.
충격흡수 고무 접촉면과 Lexan® 하우징은 1.8 m 높이의 콘크리트 낙하에서도 견딜 수 있습니다.
Superior Read Range
Imaging technology now extends the read range out to 24˝ (610 mm) on the bar codes used in retail applications
Fast and Aggressive Decode
Even on poorly printed or damaged codes, the 270 scans per second scan rate and software digitizer quickly processes the data and transmits it to your application
Durable
Built to last, there are no moving parts to wear out. Full impact resistant bumpers and a 5 year warranty make the 3800r one of the toughest scanners on the market
Reads Emerging Codes that will be Part of Tomorrow’s Solutions
Supports the EAN·UCC system, including GTIN, EAN/UCC-14, and GS1 DataBar
Connectivity
Supports all common interfaces : keyboard wedge, TTL RS232, IBM retail, USB, wand emulation, HHLC, and True RS232
OPERATIONAL
Light Source : Visible Red LED 630 nm
Visual Indicators : Green = good read
Host System Interfaces : USB, True RS232, TTL level RS232, Keyboard Wedge, IBM 46xx (RS485),
Light Pen (Wand) Emulation, Laser Emulation
MECHANICAL
Dimensions (LxWxH) : 135 mm x 81 mm x 157 mm (5.3˝ x 3.2˝ x 6.2˝)
Weight : 184 g (6.5 oz)
ELECTRICAL
Input Voltage : 4.5 - 12 VDC
Operating Power (typical) : 1.2 W (235 mA @ 5 V); 1.7 W (145 mA @ 12 V)
Standby Power (typical) : 430 mW (86 mA @ 5 V); 780 mW (65 mA @ 12 V)
DC Transformers : Class 2: 5 VDC @ 2.4 A
LED Class : Class 1: IEC60825-1, EN60825-1
EMC : FCC Part 15, ICES-003, EN55022 Class B
ENVIRONMENTAL
Operating Temperature : 32°F to 122°F (0°C to 50°C)
Storage Temperature : -40°F to 140F (-40°C to 60°C)
Humidity : 0 to 95% relative humidity, non-condensing
Drop : Designed to withstand 1.8 m (6´) drops
Environmental Sealing : IP41
Light Levels : 70,000 Lux (6,503 foot-candles)
SCAN PERFORMANCE
Scan Pattern : Linear Image (3648 pixels)
Scan Speed : 270 scans per second
Motion Tolerance : 5 cm/s (2 in/s) with 13 mil UPC at optimal focus
Scan Angle : Horizontal: 47°
Print Contrast : 20% minimum reflectance difference
Pitch, Skew : 65°, 65°
Decode Capabilities : Reads standard 1D and GS1 DataBar symbologies.
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
허니웰 3800i 산업용 바코드스캐너는 초당 270 회, 82 인치 (208 cm) 범위의 바코드를 읽을 수 있습니다.
스캐너 케이스와 밀봉된 광학 모듈에는 충격 흡수를 위한 고무 오버몰드 (overmold)가 장착되어 2 미터 콘크리트 낙하시에도 견딜 수 있습니다.
3800i 스캐너는 IP54 등급으로 먼지와 물이 스캐너에 유입되어 성능이 저하되는 것을 방지합니다.
혹독한 외부환경, 겨울철 -30 ° C (-22 ° F)의 조건의 온도에서도 작업할 수 있도록 설계되었습니다.
Superior Read Range
Imaging technology now extends the performance range out to 82 inches (208 cm) on linear codes. Long range reading performance eliminates the need to reach and climb to scan codes.
Durable
There are no moving parts to wear out and Honeywell backs this with an industry-leading 3 year warranty. Reliable performance year after year with no downtime.
Easy to Use
True point and shoot handheld ergonomics easily fi ts oversized gloved hands. Intuitive aiming means operators will become productive quickly.
Rugged Packaging
An impact absorbing, shock resistant housing withstands fi fty 6.5 foot (2 meter) drops, and is sealed to prevent dust, moisture, and other contaminants from entering the scanner. Designed to survive the most demanding industrial applications.
Fast and Aggressive Decode
Even on poorly printed or damaged codes, the 270 scans per second digital image logic is over 6 times faster than other technologies. Spend less time trying to re-scan poor codes and speed up the work process.
PERFORMANCE
Illumination : 630 nM Visible Red LED
Receiving Device : 3648 element linear imager
Reading Width : 15 mil. code, 15 in. (38.1 cm) from nose, 10 in. (25.4 cm) wide
Resolution : 7.5 mil. at 9 in. (22.9 cm) distance
Skew Angle : +65o
Pitch Angle : +65o
Horizontal Velocity : 2 in. (5.1 cm) per second
Minimum Symbol Contrast : 20%
Scan Rate : Up to 270 scans per second
Decode Rate : 270 decodes per second
MECHANICAL/ ELECTRICAL
Dimensions (without aimer) :
Length : 5.3 in. (13.5 cm)
Height : 6.4 in. (16.3 cm)
Width : 3.2 in. (8.1 cm)
Weight : 7.5 oz. (213 g)
Dimensions (with aimer*) :
Length : 5.3 in. (13.5 cm)
Height : 6.5 in. (16.5 cm)
Width : 3.2 in. (8.1 cm)
Weight : 8.4 oz. (238 g)
Housing : UL 94V0 grade
Power Requirements : 4.5 - 14Vdc at scanner
Current Draw (maximum) :
Input : 5V, 12V
Scanning : 235mA, 142mA
Idle : 68mA, 49mA
POWER SUPPLY
Noise Rejection : Maximum 100mV peak to peak, 10 to 100 kHz
ENVIRONMENTAL
Operating Temperature : -22oF to +122oF (-30oC to +50oC)
Storage Temperature : -40oF to +140oF (-40oC to +60oC)
Humidity : 0 to 95%, non-condensing
Sealing : IP54 (water and dust resistant)
Mechanical Shock : Operational after 50 drops from 6.5 ft. (2 m) to concrete
Ambient Illumination : 0 - 70,000 lux
ESD Protection : Functional after 15kV discharge
LED Classifi cation : Class 1 under EN60825-01
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보패널PC ARBOR LYNC-715-1900G4 15인치 산업용패널PC 매뉴얼HION IT
아보 산업용 패널PC, LYNC-715-1900G4 는 15 인치 인텔 ® J1900 쿼드 코어 ™ 프로세서가 장착 된 산업용 패널 PC 입니다.
산업용 PC, LYNC-715-1900G4 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인 되었습니다.
최첨단 기술로 설계된 ARBOR, LYNC-715-1900G4 패널 PC 는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
Fewer Cables, Fanless Design
15" 1024 x 768 XGA LCD Display w/ LED Backlight
Front Bezel with Completely Covered Membrane
Flush Front Panel, IP65-Compliant
Brightness Control Button
Outside-accessible Push-pull CFast Socket
Outside-accessible USB port with rubber cover on the front bezel
Serial Ports (RS-485), w/ Auto-flow Control
1 x MiniCard socket for WiFi module
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input with reverse protection
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory : 1 x 4GB DDR3L SO-DIMM memory module (installed)
LAN : 2 x Realtek® 8111E GbE controllers
Watchdog Timer : 1~255 levels reset
STORAGE
1st Device : 1 x outside-accessible CFast slot
2nd Device : 1 x 2.5” drive bay
AUDIO
Speaker : 2 x 1.5W speakers (optional)
LCD DISPLAY
Size/Type : 15" TFT LCD Panel
Max. Resolution : 1024 x 768, XGA
Max. Colors : 16.7M
Luminance : 420 cd/m²
Touch Screen : 5-wire Analog Resistive
View Angle (U/D/R/L) : 80°/80°/80°/80°
BUTTON & INDICATOR
Function Key : Brightness up/down, Screen on/off
LED Indicator : Power on LED
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket
EXTERNAL I/O
Serial Ports : 4 x DB-9 connectors for COM1~4 (COM1 ~ COM4 are RS-232/485 configurable)
USB Ports :
4 x Type-A USB 2.0 ports (rear)
1 x Type-A USB 2.0 port with rubber cover on front bezel
LAN : 2 x RJ-45 GbE ports
DVI : 1 x DVI connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-75/100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension (W x H x D) : 389.93 x 309.93 x 46.80 mm (15.4” x 12.2” x 2.37”)
Weight (Net) : 3.4 kg (without VESA bracket)
ENVIRONMENT
Operating Temp. : -20 ~ 55ºC (-4 ~ 131°F)
Storage Temp. : -20 ~ 70°C (-4 ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 55°C (non-condensing)
Vibration : 5 ~ 500Hz, 2Grms X,Y,Z axis (with CFast/SSD)
Shock : Operating 20G, 11ms X,Y,Z axis (with CFast/SSD)
OS SUPPORT
Windows 7 / Windows 8.1 / Linux (Kernel: 3.1X)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
소형 패키지의 성능
아보, 산업용 PC, IOT-800은 강력한 쿼드 코어 ARM Cortex-A9 프로세서 기반의 8 인치 HMI 입니다.
산업용 PC, IOT-800 시스템은 안드로이드 4.4에서 실행되며 성능을 중요시하는 까다로운 애플리케이션을 충족하도록 설계되었습니다.
견고하고 신뢰성있는 제품
산업용 PC인 IOT-800은 고해상도 디스플레이와 터치스크린 방식의 패널PC 입니다.
터치패널은 IP-65 등급을 유지하며 높은 충격, 진동 및 온도 범위 (최대 -10 ℃ ~ 70 ℃ 또는 14 ℉ ~ 158 ℉)에서 작동하도록 설계되었습니다. 또한 이 패널 PC는 46.5cm 두께의 견고함을 감안할 때 놀라울 정도로 슬림합니다.
모든 응용 프로그램에 대한 연결성
패널PC ARBOR IOT-800은 802.11 a / b / g / n WiFi, 블루투스 4.0, GPS, 3G / 4G 연결 및 NFC와 같은 표준 무선 기능을 갖춘 진정한 사물의 인터넷 장치입니다. 어떤 환경이나 응용분야에 관계없이, IOT-800은 시스템과 프로세스가 연결된 상태를 유지합니다.
풍부한 I/O
아보 IOT-800 패널에는 RS-232 포트 1 개, RS-232 / 422 / 485 포트 1 개, 고속 USB 포트 2 개, 2MP 카메라, 통합 스피커 및 마이크가 내장되어 있습니다. ARBOR IOT-800은 CANbus 2.0 / OBD-II 및 GPIO 포트가 장착되어있어 특별한 환경응용분야에서 사용할 수 있습니다.
Android 4.4 operating system
Quad-core ARM Cortex-A9 @1.6 GHz
Front bezel IP65 water and dust resistance
Flat front bezel with 8" TFT LCD
Built-in CAN 2.0b / OBD-II
Built-in WLAN 802.11a/b/g/n and Bluetooth 4.0 BLE
12~24V Wide-range voltage DC-input support
SYSTEM
CPU : Quad-core ARM Cortex-A9 1.6GHz
OS : Android™ v4.4
Memory : 1GB LPDDR3
Flash : 16GB eMMC
PERIPHERALS AND DEVICES
Front Camera : 2.0 megapixel camera
Audio :
1 x built-in speaker (2W)
1 x built-in microphone
WIRELESS
WCDMA / CDMA / TDSCDMA / LTE (optional) : Mini PCIE interface
GPS + BeiDou : GPS mouse
WLAN : IEEE 802.11 a/b/g/n
Bluetooth : Bluetooth 4.0 low power BLE
NFC : Support NFC transmission standard 14443A/ B,15693,felica
I/O INTERFACE
SD Card : Micro SD Card slot, maximum 32 GB
USB Host : 2 x USB 2.0 High Speed
Speaker : 1 x 8Ω/2W
DB9 Interface :
1 x RS-232 (full function),
1 x RS-232/422/485 (TX/RX)
Power button : Power on/off button
DIO Connectors : 4 x 3.3V GPIO
CAN : CAN 2.0b / OBD-II
Power-in : Connect power input, 9V~36V/1.5A
RJ45 : RJ45 x 1,support Ethernet (10/100Mbps)
MIC : One MIC-fidelity audio input
Update hole : Updade program hole
Power on switch : On/off switchable, Toggle Switch
LCD DISPLAY
Physical size : 8 inches
Resolution : 1024(W) x 600(H)
Technology : High definition and high brightness LCD display
Colors : 16M Colors,24bit
Touchscreen : GG Capacitive, 5-points Multi-touch
POWER INPUT
DC Input 2-pin terminal block 12V~24V Auto-Detection
MECHANICAL & ENVIRONMENTAL
Ingress Protection : Front bezel IP65
Operating Temp. : -10°C ~ 70°C (14°F ~ 158°F )
Storage Temp. : -20°C ~ 85°C (-4°F ~ 185°F)
Operating Humidity : 5% ~ 90% RH
Dimensions (W x H x D) : 218.2 x 162.7 x 46.5 mm (8.59” x 6.41” x 1.83”)
Weight : Around 0.926kg
INSTALLATION
VESA Mount 75mm x 75mm
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Zebra의 혁신적인 ZXP 시리즈 8 재전사 (Retransfer) 카드프린터 계열과 Windows 인증 드라이버 및 ZMotif SDK 소프트웨어를 사용하여 필요할 때 완벽한 화질로 선명한 컬러 카드와 단색 카드를 즉석에서 발급하십시오. 이 재전사 카드프린터는 스마트 카드와 같이 표면에 요철부가 있는 카드 인쇄, 높은 이미지 품질이 요구되는 분야 또는 내구성 및 마모 내성이 개선된 카드 인쇄에 적합합니다.
혁신적인 재전사 (Retransfer) 인쇄 공정을 사용하는 지브라 ZXP 시리즈 8 은 일반 신분증 사진보다 광택이 많은 잡지 인쇄물처럼 보이는 영상과 그래픽으로 고품질 포토 ID 카드를 제작하는 데 필요한 최상의 인쇄 해상도를 동급 최고 속도로 제공합니다. 프린터에 모듈형 설계를 채택하고 있어 필요에 따라 다양한 인코딩 옵션을 유연하게 추가할 수 있습니다. 단면 또는 양면 코팅도 지원합니다.
탁월한 성능
ZXP 시리즈 8은 가로 모드로 이미지를 인쇄하는 특허 받은 양면 동시 전사 공정을 채택하여 동종 최고의 인쇄, 인코딩 및 코팅 성능을 제공함으로써 품질 저하 없이 처리량과 편평도를 향상시킵니다. Zebra의 이미지 처리 기술을 기반으로 브랜드 사양과 품질을 충족하는 사진 품질 컬러와 해상도를 얻을 수 있습니다. 이 시리즈는 내부와 외부를 모두 견고하게 설계하여 수리 비용이 절감되고 가동 중단 시간이 단축됩니다.
간편한 프린터 통합 및 관리
ZMotif XML 기반 드라이버와 SDK를 채택하여 간편한 설치 및 빠른 배포에 적합한 드라이버와 관리 유틸리티 도구를 갖춘 엔터프라이즈급 카드프린터 입니다. Microsoft® Windows® 인증 드라이버가 기존 소프트웨어 인프라에서 적용 호환성, 사용 용이성 및 투자 보호를 보장합니다. USB 및 이더넷 연결 인터페이스가 표준으로 제공되며, 지역 네트워크 또는 무선 시스템에 쉽게 통합되는 WiFi 옵션도 제공합니다.
보안 기능
ZXP 시리즈 8 에는 단면 또는 양면 코팅용 라미네이터 모듈 옵션 등 보안 강화에 유용한 많은 기능을 포함하고 있습니다. 전사 필름이 내장된 사기 방지 수단 조작 증거를 보여주며, 잠금형 케이스와 카드 공급기 옵션이 무단 사용을 방지할 수 있습니다. 이 시리즈에는 Kensington® 잠금장치 슬롯도 포함됩니다.
PRINTING
Dye sublimation retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
Photo quality image
Over-the-edge printing on standard CR80 media
* Print speed based on click to drop, average print coverage, with USB connectivity, card per hour (cph).
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card reject hopper (30 mil)
100 card output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows® certified drivers
Kensington physical lock capable
LAMINATOR SPECIFICATIONS
Single-or dual-sided lamination option (with dual-sided printer only)
180 cards per hour dual-sided printing and dual-sided lamination
GSA FIPS 201 approved (dual-sided lamination)
Uses Zebra True Secure i Series laminates only
Laminate for the top and bottom sold separately
Custom-coded laminates available
CARD SPECIFICATIONS
Card thickness: 30 ? 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite***
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)***
Technology cards: contact and contactless smart cards, UHF cards***
COMMUNICATIONS INTERFACES
USB V2.0
10/100 Ethernet (encoding over Ethernet requires ZBR PS-300 Ethernet-to-USB Device Server)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZXP 시리즈 7 열전사 단면인쇄 양면인쇄(옵션) 카드프린터 매뉴얼HION IT
지브라 ZXP7 시리즈 열전사 카드프린터로 대량발급 어플리케이션에서 사진과 유사한 품질의 카드를 인쇄합니다.
Zebra ZXP7 시리즈 카드프린터는 최신의 기술에 의해 대량으로 고품질의 카드를 빠르게 인쇄하며, 총 소유비용(TCO)을 낮춤으로써 사용자에게 뛰어난 가치를 제공합니다.
또한 정밀한 컬러 제어로 항상 선명한 카드를 인쇄합니다.
ZXP 시리즈 7 카드프린터는 혁신적인 디자인을 도입하였습니다.
지브라 ZXP 시리즈 7 카드프린터는 카드의 두께에 따라 자동으로 조정되고 간편하게 리본을 로딩할 수 있습니다.
색상으로 구분된 안내와 선명한 LCD 제어판으로 누구나 쉽게 사용할 수 있으며, 다양한 인코딩 및 연결 옵션 중에서 선택하면 됩니다.
그리고 특별한 보안 또는 내구성이 필요한 카드의 경우에는 폐기물 없는 단면/양면 라미네이트를 사용할 수 있습니다.
잠금 메카니즘은 프린터와 미디어를 보호하며 필요에 따라 소프트웨어로 작업을 추적하고 제한함으로써 보안을 더욱 강화할 수 있습니다.
성능 : 카드마다 필요한 방식으로 작동
ZXP 7 시리즈 카드프린터는 오늘날의 까다로운 비즈니스 니즈를 충족시킬 수 있도록 제작되었습니다.
광범위한 환경과 어플리케이션에서 바로 사용할 수 있는 강력한 디자인
사진 인쇄 기술을 적용하여 사진과 유사한 인쇄 품질 및 색의 농도 생성
풀전사(edge-to-edge)카드 인쇄
라미네이터로 카드의 보안 보장 및 이미지 수명 연장
생산성 : 빠른 속도와 간편한 유지보수
ZXP 7 시리즈 카드프린터는 빠른 인쇄 속도로 생산성을 향상시키고 대기 시간을 줄입니다:
빠른 click-to-drop 및 배치 인쇄 속도
최대 세가지 작업(인코딩, 인쇄, 라미네이팅)의 동시 처리로 가장 빠른 처리량 제공
보다 빠른 인쇄를 위해 개발된 ix Series™ 리본
양면 동시 라미네이팅
용이한 통합 및 간편한 유지보수가 가능합니다:
높은 미디어 용량
리본과 라미네이트 롤 사이즈 동일
리본 로딩 및 운영 간소화
Windows® 드라이버, ZMotif™SDK, 빠른 설치를 위한 네트워킹 옵션
적용성 : 현재 및 미래의 비즈니스 니즈 충족
ZXP 7 시리즈 카드프린터는 진정한 유연성을 제공합니다.
필요시 옵션을 구매하여 카드 인쇄 어플리케이션 포트폴리오 확장 및 투자 관리를 동시에 할 수 있습니다.
옵션 :
단면 또는 양면 인쇄
다양한 인코딩 및 연결 옵션
폐기물 없는 단면 또는 양면 라미네이트
물리적 보안 잠금 메커니즘
적용성 및 소프트웨어를 통한 제어:
ZXP Toolbox를 통해 프린터, 드라이버, 소프트웨어 설정에서부터 관리, 진단까지 고급 제어 기능 제공
고급 보안 기능으로 사용자별 기능 및 권한 설정에 필요한 관리 유연성 제공
소프트웨어 개발자는 ZMotif SDK를 사용하여 고급 기능의 간편한 통합 또는 맞춤형 인쇄 어플리케이션 개발 가능
비용 효율성 : 카드 당 비용을 최소화하도록 설계된 소모품
ZXP 7 시리즈 카드프린터는 Zebra True Colours® ix Series 리본과 Zebra True Secure™ i Series™ 라미네이트를 함께 사용하도록 설계되었습니다.
대용량 리본은 롤 당 더 많은 이미지를 제공함으로써 비용을 줄이고, 보다 빠른 속도로 고품질의 이미지를 인쇄할 수 있는 개선된 포뮬레이션을 자랑합니다.
대부분의 리본 타입은 모든 인쇄 업무의 니즈를 충족시키기 위해 두 가지 사이즈로 제공합니다.
Zebra True Secure 라미네이트는 카드 위조 위험을 줄이고 강력한 보안 카드의 수명을 연장시켜 줍니다.
독창적인 라미네이트 디자인은 라미네이트의 Carrier, Backing, Liner 를 제거함으로써 폐기물을 급격히 줄여 줍니다.
또한 특수 설계된 카트리지로 라미네이트를 간단하게 교체할 수 있습니다.
리본과 라미네이트 모두 지능형 미디어 기술을 활용하여 프린터를 자동으로 감지하고 보정합니다.
STANDARD FEATURES
300 dpi/11.8 dots per mm print resolution
USB 2.0 and Ethernet 10/100 connectivity
Microsoft® Windows Certified drivers
200-card capacity feeder (30 mil)
15-card reject hopper (30 mil)
100-card output hopper (30 mil)
Single-card feed capability
ix Series intelligent media technology
21-character x 6-line LCD operator display with configurable soft keys - Kensington® physical lock slot
Two-year unlimited warranty on printer and printhead
OPTIONAL FEATURES
Single-sided laminator
FIPS 201 compliant dual-sided laminator
Lockable enclosures and card feeder**
EXtended product warranty programs
802.11b/g wireless connectivity
1D barcode scanner
Duo-Print upgrade kit
NOTE: FIPS201 compliant dual-sided laminator is only for North America.
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11b/g wireless option
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
초고속으로 사진처럼 생생한 이미지 품질 구현
보안성이 뛰어난 애플리케이션 요구를 충족하도록 설계된 ZXP 시리즈 9™을 사용하면 사진 품질의 카드를 빠르고 안정적으로 생성 할 수 있습니다. 안정성을 자랑하는 ZXP 시리즈 9 카드프린터는 사진과 그래픽 인쇄에 적합하며 지브라의 Color Predictive Technology (색상 예측 기술)를 채택하고 있습니다. 이 기술은 지속적인 모니터링과 프린터 설정 즉시 적용을 통해 최고 수준의 품질을 자동으로 생성합니다. 본 재전사 프린터 제품은 스마트 카드와 같이 표면이 고르지 않은 경우에도 내구성이 뛰어난 풀전사 카드 제작이 가능합니다.
탁월한 인쇄 품질과 성능
ZXP 시리즈 9 재전사 카드프린터는 탁월한 품질과 안정성, 빠른 처리 속도, 더 많은 옵션과 귀중한 비용 및 시간 절감 효과를 제공합니다.
고품질 카드를 빠른 속도로 인쇄하며, 동급 최강의 재전사 및 라미네이트 기술로 강화된 보안을 보장합니다.
유연하고 간편한 작업
ZXP 시리즈 9 카드프린터를 통합 및 관리하는 데 필요한 도구를 제공하는 종합적인 소프트웨어 제품군을 사용하여 맞춤형 카드 디자인을 생성할 수 있습니다. 사용자 선택 가능 인쇄 품질 모드는 더 많은 옵션과 제어 기능을 제공합니다. 특허받은 Zebra의 양면 동시 재전사 인쇄 설계로 인쇄 도중 프린터가 카드를 기계적으로 뒤집을 필요가 없습니다. 이 기술 덕분에 기계적 오류나 카드 걸림 현상이 감소합니다. 그리고 Print Touch™ 및 QR 코드 기술이 즉석에서 관련 정보와 지원을 제공합니다.
보안 기능 추가
특수 홀로그램 라미네이트와 함께 암호화, 프린터 호스트 인증 등의 프린터 기반 보안 기능으로 보안을 한층 더 강화하고 불법 위조, 변조 및 복제를 방지할 수 있습니다. 지브라는 카드 위조 방지를 위해 전용 카드 보안 기능이 필요한 맞춤형 홀로그램 라미네이트를 지원합니다. ZXP 시리즈 9는 무단 사용을 방지하기 위한 카드 피더 및 인클로저와 함께 선택적으로 잠금 기능도 라미네이터에 탑재할 수 있습니다.
PRINTING
Dye diffusion retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
User-selectable print modes: standard and fine
Photo-quality images
Over-the-edge printing on standard CR80 media
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card capacity reject hopper (30 mil)
100 card capacity output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows certified drivers
Kensington physical lock capable
CARD SPECIFICATIONS
Card thickness: 30 - 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite**
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)**
Technology cards: contact and contactless smart cards, UHF cards**
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11 b/g wireless connectivity
ELECTRICAL
Auto-switching single-phase AC power
100V~240V AC and 50-60 Hz
PHYSICAL
Height (w/ card hoppers): 13.2”/334 mm
Width (w/ card hoppers): 18.75”/476 mm
Width (w/ card hoppers, w/ laminator): 30.75”/781 mm
Depth: 20.4”/519 mm
Weight (printer only): 27.5 lbs./12.5 kg
Weight (printer, laminator): 44 lbs./20 kg
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410RFID ZT420RFID 열전사감열 산업용 RFID프린터 매뉴얼HION IT
Zebra ZT400 시리즈 RFID 프린터 / 인코더는 혹독한 환경 속에서 안정적인 인쇄와 인코딩에 필요한 고급 기능을 제공합니다.
RFID 라벨링의 가격대비 성능을 선도하는 지브라의 ZT400 RFID 프린터는 여러 산업분야의 다양한 애플리케이션을 지원합니다.
지브라 ZT400 RFID는 RZ™ 시리즈보다 처리량 및 극한 환경에서 생산성을 향상시키는 견고한 금속 프레임을 특징으로합니다.
ZT400 시리즈는 4인치 ZT410 및 6인치 ZT420 은 0.6 "/ 16 mm의 작은 라벨을 인쇄 및 인코딩 할 수 있으며, 소형 라벨 애플리케이션에 대한 정확한 등록으로 최대 600 dpi를 인쇄 할 수 있습니다.
직렬, USB 2.0, 블루투스 및 10/100 이더넷 통신을 비롯한 다양한 표준연결 옵션은 물론 802.11 a / b / g / n 보안 무선 및 병렬 옵션도 제공합니다.
Integrated ThingMagic® RFID reader/encoder
RFID system is available as a factory- or field-installable option
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Adaptive encoding technology automatically eliminates complex RFID placement guidelines
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Auto-tag calibration for label lengths of 2” or greater
Optimised for throughput of both small and large labels
RFID job-monitoring tools track RFID performance
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
RFID ZPL® commands provide compatibility with existing Zebra RFID printers
RFID
Integrated RFID system is user-upgradable in the field
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Automatically eliminate complex RFID placement guidelines with adaptive encoding technology
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Track performance with RFID job-monitoring tools
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
Integrated ThingMagic® RFID reader/encoder
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory :
256 MB RAM memory (4 MB user available)
512 MB Flash memory (64 MB user available)
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm
Media Sensors : Dual media sensors: transmissive and reflective
Media Characteristics : Media web width (label and liner)
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410 ZT420 열전사감열 산업용 바코드프린터 매뉴얼HION IT
지브라프린터 ZM400 후속 모델로 지브라 ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 다양한 어플리케이션에서 장시간 사용이 가능 하도록 설계된 뛰어난 산업용프린터로 귀사의 중요 업무를 효율적으로 지원 할 것입니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 현장에서 입증된 Z Series의 신뢰성을 바탕으로 인쇄속도 인쇄품질 및 네트워크 연결 옵션을 더욱 개선하였습니다.
또한 사용자 편의성을 고려하여 디자인된 ZT400 시리즈 바코드프린터는 직관적인 아이콘 기반의 LCD 그래픽 사용자 인터페이스를 제공하며 소모품을 간편하게 장착할 수 있습니다.
통신연결은 USB, 직렬, 이더넷 및 블루투스 포트를 기본으로 제공하며, 확장된 RFID 기능은 더욱 강력한 추적 능력과 상세한 가시성을 제공합니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 4인치, 6인치 모델로 제공되며, 귀사의 바코드프린터 투자에 현재와 미래의 요구를 항상 충족시킬 수 있도록 광범위한 고급 기능을 표준으로 제공합니다.
외관은 전체가 금속 프레임과 접이식 도어로 구성되어 공간이 제한된 환경에 적합하도록 설계되었습니다.
강력한 멀티플렛폼 SDK (Software Development Kit)와 소프트웨어 어플리케이션이 결합된 혁신적 운영체제인 제브라의 Link-OS 환경을 통해 전세계 어디에서나 통합, 관리, 유지보수가 용이합니다.
ZT410
Maximum print width : 4 인치
Maximum ribbon length : 450 m
Maximum print speed ; 14 ips
User Interface : LCD
Print resolution : 203, 300, 600 dpi
Printer control language : ZPL, EPL, others
ZT420
Maximum print width : 6 인치
Maximum ribbon length : 450 m
Maximum print speed ; 12 ips
User Interface : LCD
Print resolution : 203 and 300 dpi
Printer control language : ZPL, EPL, others
어플리케이션 유연성
폭넓은 범위의 사용가능한 미디어와 미디어 배송 옵션으로 프린팅 준비성 확대
최종 사용자가 설치 가능한 미디어 핸들링 옵션으로 현재와 미래의 비지니스 요구에 맞게 프린터 커스터마이징 가능
직렬, USB, 이더넷 및 블루투스의 기본 제공 및 기타 연결 옵션을 위한 두개의 개방형 미디어 슬롯
설치 및 사용 용이성을 고려한 확장된 RFID 기능
고해상도 인쇄기능으로 소형 바코드라벨 어플리케이션에서 고품질의 결과물 보장
간편한 통합
USB 호스트 포트의 장착으로, 미러링을 통한 USB 플래시 드라이브 데이터의 간편한 전송과 확장된 매핑 드라이브 메모리 기능을 활용하여 간단한 프린터 설정 가능
Virtual Device 앱을 통해 ZPL 및 EPL 이외 주요 래거시 및 경쟁사 프린터 언어를 지원함으로 미래에 대비한 투자 가능
용이한 조작
Dynamic QR 코드로 프린터 오류의 신속한 해결을 위한 온디맨드, 웹 기반의 지원 제공
Print Touch 를 지원하는 Link-OS 프린터는 NFC(Near Field Communicatrion)를 사용하여 웹 페이지 실행, 사용법에 관한 동영상과 제품 지원에 관한 지브라의 광범위한 지식 기반에 편리하게 엑세스
미디어 및 리본 경로의 조명으로 어두운 환경에서도 프린터 내부 확인 용이
간단한 관리
지브라의 Link-OS 환경으로 어느 곳에서나 프린터의 모니터, 관리 및 유지보수가 가능한 진보된 기능 제공
Clould Connect를 이용하여 인쇄 및 기기 관리를 위한 Link-OS 지원 프린터와 클라우드의 안전하고 직접적인 상호 작용 가능
Profile Manager를 통해 전세계 어디에서든 단일 프린터, 복수의 프린터, 또는 네트워크상의 모든 Link-OS 지원 프린터를 편집 및 관리
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory : 256 MB SDRAM/ 512 MB on-board linear Flash memory
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm per second
Media Sensors : Dual media sensors - transmissive and reflective
Media Characteristics - Media web width (label and liner):
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT220 ZT230 열전사감열 산업용 바코드프린터 매뉴얼HION IT
S4M 바코드프린터의 장점을 바탕으로 고객으로부터의 다양한 의견 수렴을 통하여 출시된 새로운 ZT200 시리즈 바코드프린터는 우수한 공간 절약형 디자인, 손쉬운 설정, 직관적인 사용자 운영 그리고 편리한 서비스 및 유지보수 등의 특징을 가지고 있습니다.
ZT200 바코드프린터 시리즈는 바코드 기술의 신규 도입부터 기존 바코드프린터 모델의 업그레이드까지, 다양한 라벨링 어플리케이션에 적합한 탁월한 선택이며, 이 혁신적인이고 새로운 프린터는 많은 사용자에게 혜택을 제공할 것입니다.
지브라 ZT200 바코드프린터 시리즈는 효율적인 디자인과 작은 크기로 Stripe와 S4M 모델 보다 물리적 공간을 더욱 작게 차지하며 최소한의 운영자 교육, 주요 구성요소에 대해 공구가 필요없는 유지보수 서비스를 제공합니다.
또한 기존 시스템과의 완벽한 호환성을 제공하기에 IT 담당자는 다운타임을 최소화하면서 새로운 프린터를 운영할 수 있습니다.
ZT220
지브라의 가장 저렴한 탁상용 프린터
충격에 강하고 견고하여 오래 사용할 수 있는 폴리머 케이스
300m 리본 용량
사용자가 간단하게 사용할 수 있는 3개의 조작 버튼
바코드라벨의 교체가 빈번하게 발생하는 작업에 이상적입니다.
ZT230
견고한 금속 케이스로 오래 사용할 수 있습니다.
가동 시간을 늘리고 리본 교환 횟수를 줄이기 위한 450m 리본 용량
화면 표시 내용이 그래픽으로 처리되어 바코드프린터 설정 및 제어가 편리함
바코드라벨의 교체가 좀 더 빈번하게 발생하는 작업에 이상적입니다.
지브라 ZT200 바코드프린터 시리즈는 고객의 다양한 의견과 고객의 프린팅 어플리케이션, 진화하는 비즈니스 요구와 운영상의 문제점에 대한 이해를 바탕으로 설계된 최고의 제품으로, ZT200 시리즈는 동급 프린터에서 일반적으로 찾을 수 없는 탁월한 성능과 특징을 제공합니다.
공간 절약형 디자인
제한된 좁은 공간에 적합한 작은 설치 공간과 효율적인 설계
업무 공간을 최대화하며 좁은 공간에도 적합한 독특한 접이식 도어의 공간 절약형 디자인(개방 공간 102mm/4” 필요)
빠른 설치 및 통합
구형 Stripe 및 S4M 모델의 완벽한 후속 모델
다중 연결 옵션: 병렬, 10/100 이더넷, 802.11b/g/n 무선
아이콘 기반의 상태 LED로 프린터 상태를 쉽고 즉각적으로 파악
직관적이고 손쉬운 미디어 장착
복잡한 소모품 장착을 간소화하는 측면 장착 디자인
처음 사용자도 리본 및 미디어를 장착할 수 있도록 색깔로 표현된 시각적 안내 제공
미디어를 통해 보이는 발광형 이동식 센서로 간단하게 센서 위치 조정
인쇄 품질
미세 조정으로 더 나은 인쇄 정확도를 보장하도록 제작
선명하고 깔끔한 텍스트 및 바코드 - 좁은 미디어에서도 가능
Zebra 신뢰성과 내구성
경공업 및 상업 환경에 적합하도록 제작
Energy Star® 인증
최소한의 유지보수로 최적의 성능을 제공하도록 설계된 드라이브 시스템
간소화된 사용성
플래턴과 프린트헤드를 도구없이 쉽게 제거함으로써 간단히 청소와 교체 가능
손쉽게 교체 가능한 연결 옵션으로 신속한 프린터 교체 및 업그레이드 가능
일반적인 도구 3개로 기본 서비스 가능
PRINTER SPECIFICATIONS
Resolution ;
8 dots per mm/203dpi
12 dots per mm/300dpi (optional)
Memory : Standard / 128MB flash (58MB user-available), 128MB DRAM
Print width ;
104mm/4.09"
Minimum: 0.75"/19.4mm
Print speed : 152mm/6" per second
Media sensors : Transmissive and reflective sensors
Media characteristics ;
Maximum label and liner width : 114mm/4.5"
Maximum non-continuous label length : 991mm/39"
Media width : 19.4mm/0.75" to 114mm/4.50"
Print length ;
203dpi : 3,988mm/157"
300dpi : 1,854mm/73"
Maximum media roll size ;
203mm/8.0" O.D on a 76mm/3.0" I.D. core
152mm/6.0" O.D. on a 25mm/1.0" I.D. core
Media thickness : 0.076mm/0.003" to 0.25mm/0.010"
Media types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZE500시리즈 열전사감열 RFID프린터엔진 오토라벨러엔진 바코드프린터엔진 매뉴얼HION IT
지브라의 새로운 ZE500™ 시리즈는 OEM 바코드 인쇄 엔진에 대한 혁신적인 접근 방식을 채택했습니다.
Zebra ZE500 시리즈 바코드 프린터 엔진은 광범위한 설문 조사를 활용하여 디자인, 사용 편의성, 서비스 및 통합 용이성에 중점을 두고 중요한 자동라벨링 업무에 중단없이 작동하도록 설계되었습니다.
우아한 디자인의 ZE500 바코드 프린터 엔진은 유지 보수를 단순화하고 유지 보수에 대한 가동 중단 시간을 획기적으로 줄여주며 3개의 롤러는 모두 프린터의 전자 장치에 접근할 필요없이 수 분 만에 교환 할 수 있습니다.
와이드 오픈 프린트 헤드는 청소 및 교체를 단순하게하며 퀵 체인지 모듈 식 드라이브 시스템은 프린터 수리 시간을 줄입니다.
확장된 RFID 기능은 보다 향상된 추적 성능을 제공하여 운영 효율성을 향상시킵니다.
리본 교체와 같은 일상적인 작업은 매우 간단합니다 (두 인쇄 폭 모두 동일).
새로운 그래픽 LCD 디스플레이는 장치에서 분리할 수 있으며 사용 편의성을 위해 응용 프로그램에 적합한 위치에 재배치 할 수 있습니다.
인쇄 및 적용할 기계와 쉽게 통합할 수 있으며 먼지와 물에 대한 내성이 뛰어납니다.
확장된 연결 포트 및 어플리케이터 포트의 향상된 소프트웨어 제어 기능은 통합 유연성을 한층 향상시킵니다.
Resolution: 203 dpi (8 dots per mm); 300 dpi (12 dots per mm)
Rotatable front panel display (0,180)
16MB SDRAM memory, 64MB Flash Memory
Available in right and left hand configurations
ZebraNet 10/100 Print Server (Internal)
Embedded ZebraLink WebView™and Alert features
Real Time Clock
Applicator interface - provides status and control signals for applicators
Communications via serial RS-232, IEEE 1284 bidirectional parallel interface with auto detect, and USB 2.0 port
Full function graphic front panel & large multilingual back-lit LCD display with user programmable password protection
Thin film print head with E3® Element Energy Equalizer
Dual media sensors, transmissive and reflective, selectable through software or front panel
ZPL® or ZPL II® programming language, selectable through software or front panel
XML-Enabled Printing ? allows XML communications from today's enterprise systems for barcode label printing
32 bit 133 MHz RISC processor
Zebra printer driver for Windows 7, XP, Vista, 2008, and 2003 operating systems
Advanced media counters
PRINTER SPECIFICATIONS
ZE500-4™ :
Maximum print width : 4.1”/104 mm
Media specification :
Label and liner width: 0.625”/16 mm to 4.5”/ 114 mm
Minimum length with back feed: 0.5”/13 mm
Minimum length without back feed: 0.25”/6.5 mm
Minimum length in stream mode: 0.25”/6.5 mm
Maximum length: 39”/990 mm
Maximum continuous media print length: 150”/3,810 mm
Ribbon width: 1”/25.4 mm to 4.2”/107 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed : 12”/305 mm per second (203 and 300 dpi)
ZE500-6™ :
Maximum print width : 6.6”/168 mm
Media specification
Label and liner width : 3”/76 mm to 7.1”/180 mm
Minimum length with back feed : 3”/76 mm
Minimum length without back feed : 1”/25.4 mm
Minimum length in stream mode : 1”/25.4 mm
Maximum length : 39”/990 mm
Maximum continuous media print length : 150”/3,810 mm
Ribbon width : 3”/76 mm to 7.1”/180 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed
12”/305 mm per second (203 dpi)
10”/254 mm per second (300 dpi)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
고객의 니즈를 충족시키는 고성능 옵션의 지브라 G 시리즈™ GX™ 및 ZD500™ 데스크탑 바코드프린터는 가장 빠른 인쇄 속도와 함께 이더넷, LCD 화면, 무선 또는 블루투스를 비롯한 다양한 첨단 기능 및 옵션을 제공합니다.
확장된 미디어 처리 기능으로 Peel & Present와 라벨, 영수증 및 태그에 적합한 정밀 커터, 라이너리스 라벨 등을 제공합니다.
지브라 GX™ 시리즈 및 ZD500™ 고성능 바코드프린터는 지브라 데스크탑 바코드프린터 제품군 중에서 가장 빠른 인쇄 속도와 완벽한 기능 세트를 제공합니다.
혁신적인 라벨, 영수증 및 태그 처리 기능을 갖추고 있어 필요한 유연성을 얻을 수 있습니다.
최상의 인쇄 품질과 다양한 연결 옵션을 제공하는 GX420™, GX430™ 및 ZD500 프린터는 다양한 애플리케이션을 지원하고 거의 모든 환경에 통합 가능하기 때문에 사용자가 효율과 수익을 높이고 시간을 절약하여 작업자 교육을 최소화할 수 있습니다.
고해상도의 인쇄 품질, 4개의 연결 옵션을 제공하는 ZD500 프린터는 컴팩트하며 최고의 성능에 필요한 기능들을 탑재한 프린터입니다.
어디에서든지 손쉽게 통합, 관리 및 유지보수할 수 있는 Link-OS 지원 프린터입니다.
감열 또는 열전사 모드로 작동합니다.
포함된 기능
지브라의 고성능 데스크탑 바코드프린터는 향상된 효율성과 생산성을 위해 동급 최고의 인쇄 속도와 기능을 제공합니다.
각 모델은 다양한 연결 옵션과 ZPL® 및 EPL™(GX 모델만 해당) 프로그래밍 언어로 손쉬운 업그레이드 및 통합을 제공하고 총 소유비용(TCO)을 절감할 수 있는 ENERGY STAR™ 인증 프린터입니다.
애플리케이션 유연성을 극대화해주는 강력한 기능
확장된 미디어 핸들링 옵션으로 Peel & Present와 라벨, 영수증 및 태그, 라이너리스 라벨에 적합한 Cutter 등을 제공합니다.
블루투스와 WiFi를 포함한 다양한 연결 옵션. LCD 디스플레이(옵션)를 통해 프린터 설정을 변경할 수 있습니다.
특정 요구에 맞도록 구성 가능
감열 또는 열전사 모델로 제공되는 이들 소형 바코드프린터는 직관적인 디자인과 다양한 연결 옵션을 갖추고 있습니다.
GX430과 ZD500 프린터 모두 300 dpi 고해상도 인쇄가 가능하므로 텍스트와 그래픽으로 구성된 소형 바코드라벨 인쇄에 적합합니다.
PRINTER FEATURE
Print methods : Thermal Transfer and Direct Thermal
ZPL programming language
EPL programming language (GX model only)
Dual-wall frame construction
Tool-less printhead and platen replacement
Open ACDESS for easy media loading
Quick and easy ribbon loading
Simplified calibration of media
ENERGY STAR qualified
PRINTER SPECIFICATIONS
Resolution :
203 dpi/ 8 dots/mm per mm
300 dpi/ 12 dots/mm per mm (optional on ZD500)
Memory:
128 MB Std SDRAM memory (4 MB available to user)
256 MB Std Flash memory (56 MB available to user)
Real time clock
Maximun Print Width : 4.09"/ 104 mm
Maximun Print Length : 39.0"/ 990 mm
Maximun Print Speed :
6"/152 mm per second (203 dpi)
4"/102 mm per second (300 dpi)
Media Sensors : Multi-position transmissive and adjustable reflective sensor
MEDIA CHARACTERISTICS
Label and Liner Length :
Maximum non-continuous : 39"/ 990 mm
Maximum using tear off mode : .25" (6.3 mm)
Minimum with label present sensor used : 0.5"/ 12.7 mm
Minimum with cutter : 1.0"/ 25.4 mm
Label and Liner Width : 0.75"/ 19 mm - 4.25"/ 108mm
Media Roll Size :
Maximum outside diameter : 5"/127 mm
Core inner diameter : 0.5"/ 12.7 mm, 1.0"/25 mm, 1.375"/ 35 mm, 1.5"/37.1 mm, 3"/ 76mm
Media Thickness : .003"/0.08 mm to .012"/ 0.305 mm
Media type : Roll-fed or fan-fed, dia-cut or continuous direct thermal label with or wothout black tag, stock, continuous receipt paper, wristbands
Ribbon charcateristics :
Outside diameter : 1.36"/ 35 mm
Standard length : 244"/ 74 m
Ratio : 1:1 media to roll to ribbon
width : 1.33"/ 33.8 mm to 4.3"/ 109.2 mm
Core inner diameter : 0.5"/ 12.7 mm
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 QLn 시리즈 모바일 프린터의 확장인 QLn220 ™ 및 QLn320 ™ 헬스케어 프린터는 의료 시설의 요구에 맞게 특별히 설계되었습니다.
지브라 헬스케어 모바일 프린터는 세균으로 부터 환자를 보호하기 위해 내구성이 높고 소독이 가능한 재료를 사용하여 제작되었습니다.
특히 의료용으로 개발된 Zebra의 QLn 시리즈 프린터를 사용하면 다음과 같은 업무를 지원합니다.
병원 침상 옆의 표본을 모으고, 수집 및 관련 레이블을 만들 수 있습니다.
Zebra의 Link-OS® 환경으로 모든 인쇄 장치를 가상으로 관리, 유지 보수 및 업그레이드 할 수 있습니다.
프로파일 관리자 응용프로그램을 사용하여 프린터 구성을 제어하고 형식 출력 및 인쇄물의 일관성을 유지합니다.
서비스 요청 감소
CLSI (Clinical and Laboratory Standards Institute®) 표준을 만족하는 라벨 인쇄
STANDARD FEATURES
Includes disinfectant-ready plastics in a lighter healthcare color scheme
Apple® iOS, Android, Windows Mobile and BlackBerry® connectivity
Direct thermal printing of barcodes, text and graphics
CPCL, EPL™ and ZPL® programming languages
256 MB Flash supports downloadable programs, receipt formats, fonts and graphics (64 MB available for user storage)
2450 mAh (nominal) 18.1 Wh removable, rechargeable Li-Ion battery
Built-in battery charger
IEC 60601-certified AC adapter for medical environments
Serial and USB ports (both support strain relief)
Belt clip for unobtrusive and convenient printing (not compatible with extended capacity battery)
Black mark and gap media sensing using fixed center position sensors
Easy-to-use peel and present mode
Label present sensor for issuing labels one at a time
Tear bar for easy media dispensing
Center-loading media locking for variable roll widths
“Clamshell” design for easy media loading
Management: Mirror, SNMP, Web server, Profile Manager, AirWatch® and Wavelink Avalanche®
Large, easy-to-read LCD control panel (240 x 128 pixels)
LCD can be customized using WML (text and icons)
5-way navigation buttons, two software defined keys
Printer alerts on the display, help menus
Tolerance of multiple drops from 5’/1.52 m to concrete
IP43 dust- and water-resistance rating (IP54 with soft case)
400 MHz 32-bit ARM processor
XML support
Supports vertical and horizontal printing
Printers can be used in any orientation
QR barcode links to web-based help pages
Zebra Print Touch simplifies Bluetooth pairing and launches web-based help pages with Near Field Communication (NFC) enabled devices
Label odometer
Real-time clock
PRINTER SPECIFICATIONS
Resolution : 203 dpi/8 dots per mm
Memory : 128 MB RAM; 256 MB Flash (standard)
Print Width : 1.9”/48 mm
Print Length : Min: 0.5”/12.7 mm, Max: 32”/813 mm
Print Speed : Up to 4”/102 mm per second
Media Sensors : Black mark and gap media sensing using fixed center position sensors; label present sensor for issuing labels one at a time
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 MP6000, 2D 고정식 바코드스캐너는 거의 모든 인쇄 또는 휴대폰, 태블릿PC 화면의 1D 또는 2D 바코드를 사실상 놀라운 속도로 모든 상황에서 캡처 할 수 있습니다.
놀라운 스캔 성능
지브라의 업계에서 입증된 선도적인 이미징 기술을 사용하면 오늘날 사용 가능한 어떤 레이저 바이옵틱 스캐너보다 빠른 속도로 바코드를 스캔할 수 있습니다.
각종 바코드 캡처
어떤 종류의 1D 및 2D 바코드라도 자동으로 판독/평가할 수 있습니다.
종이 라벨에 인쇄되어 손상되었든, 플라스틱 고객카드나 기프트카드에 인쇄되어 있든, 휴대전화 화면에 표시되어 있든 상관 없습니다.
탁월한 신뢰성, 비용 및 총소유비용(TCO) 절감
고장 및 유지 관리 비용을 최소화할 수 있습니다. 스캔 엔진에 작동 부품이 없으므로 전력 소비량이 최소 30% 감소하고 정전용량형 버튼도 마모되는 일이 없습니다.
매장 및 고객 요구 사항에 맞게 맞춤 가능
6개 포트가 있으므로 스케일, 고객이 휴대전화나 고객카드의 바코드를 스캔할 수 있는 고객 스캐너(Customer Side Scanner), 핸드헬드 스캐너, EAS 기기 등과 같은 새로운 기능을 손쉽게 추가할 수 있을 뿐만 아니라, RFID와 같은 미래의 요구 사항에 맞게 확장도 가능합니다.
탁월한 관리 기능
보완적 관리 소프트웨어를 사용하면 스캐너, 스케일, 연결된 모든 주변 기기를 비롯해 전체 스캐너 솔루션을 원격으로 관리할 수 있습니다.
사파이어 유리
수평 스캔 창에 업계 최고의 유리를 사용하여 긁히지 않고 마모나 훼손에도 취약하지 않습니다.
통합 EAS 지원
현재 사용 중인 Checkpoint® 또는 Sensormatic® 시스템을 지원하므로 업그레이드하느라 별도의 시간 및 비용이 들지 않습니다.
초 저소음
레이저 스캐너와 달리 모터 소음이 없는 MP6000은 매우 조용하여 POS 환경을 개선시켜 줍니다.
사용 편의성
전방향 스캔 및 6면 720° 커버리지 영역을 지원하므로 신속하게 스캔하고 정확하게 계산을 마칠 수 있습니다.
고객측 스캐너(옵션)
고객이 자신의 고객카드, 쿠폰, 충동 구매 품목 및 휴대전화에 표시된 바코드를 동시에 스캔할 수 있습니다.
손쉬운 설치
기존 계산대에 잘 맞습니다.
3개의 프로그래밍 버튼
푸시버튼을 사용해 광범위한 POS 프로세스를 간소화하여 처리량을 향상시켜 줍니다.
PHYSICAL CHARACTERISTICS
Dimensions :
Long scanner and scanner/scale :
20 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 507 mm L x 292 mm W x 102 mm D x 128 mm H
Medium scanner and scanner/scale : 15.7 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 399 mm L x 292 mm W x 102 mm D x 128 mm H
Short scanner : 13.9 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 353 mm L x 292 mm W x 102 mm D x 128 mm H
Weight :
Long scanner : 15.2 lb./6.9 kg
Long scanner/scale : 18.3 lb./8.3 kg
Medium scanner : 13.0 lb./5.9 kg
Medium scanner/scale : 16.2 lb./7.4 kg
Short scanner : 12.0 lb/5.4 kg
Scale :
30 lb. in 0.01 lb. increments/15 kg in 5 g increments
Maximum static weight: 300 lb./136 kg
Scale can be added after scanner installation (most countries)
Single-cable and dual-cable protocols
Compatible with Mettler and Bizerba price computational scales
Options :
0-12 lb. in 0.005 lb. increments and 12-30 lb. in 0.01 lb. increments
0-6 kg in 2 g increments and 6-15 kg in 5 g increments
Single-head and dual head remote scale displays
Dual heads rotate throug 290° for widest viewing angles on the market
Horizontal Glass : Sapphire; integrated Produce Lift Bar
User Interface :
Soft touch capacitive pads (no buttons to break or wear out)
Wide, centrally located two-color decode/ information bar (clear for cashiers and self-checkout users)
Beeper: adjustable volume and beep tones
Three programmable buttons
Ports :
One shared POS port for USB/RS-232/ IBM RS-485
Three USB peripheral ports
Two powered RS-232 peripheral ports
Checkpoint interlock port
Remote scale display port
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC70 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC70 / TC75 산업용 PDA는 처음부터 기업용으로 제작된 전문가용 안드로이드 디바이스입니다.
업무를 효율적으로 처리하고 고객에게 향상된 서비스를 제공하려면 지속적인 통신과 정보 액세스가 가능한 엔터프라이즈급 핸드헬드 컴퓨터가 필요합니다.
그러나 직원들은 일반 소비자 기기와 같이 세련되고 사용하기 쉬운 장치를 원합니다.
지브라 TC70 바코드 PDA는 이 두 가지 요구를 모두 충족시킬 수 있습니다.
Mobility Extensions(Mx)는 AndroidTM 를 진정한 의미의 엔터프라이즈급 운영체제로 만들어줍니다.
Zebra TC70 안드로이드 기반의 산업용 PDA는 견고한 디자인으로 가장 까다로운 환경에서도 안정적으로 사용할 수 있으며 양방향 무전기로도 활용할 수 있습니다.
내장 스캐너와 카메라를 사용하면 어떠한 유형의 비즈니스 인텔리전스도 자동으로 캡처할 수 있습니다.
완벽한 액세서리 및 최신 기술 구성으로 현재뿐 아니라 미래 비즈니스까지 지원할 수 있으므로 높은 투자 수익률을 기대할 수 있습니다.
지브라 TC70은 소매, 제조 및 영업 분야에서 고객에게 보다 나은 서비스를 제공할 수 있습니다.
실질적인 경쟁 우위를 확보할 수 있습니다.
Mobility Extensions(Mx) 및 Mobility DNA와 함께 기업용으로 강화된 Android KitKat
모든 TC70/ TC75 산업용 PDA에는 안드로이드를 소비자급 운영 체제(OS)에서 진정한 엔터프라이즈급 OS로 변신시켜주는 Mobility Extensions(Mx)가 함께 제공되며, 엔터프라이즈급 보안과 장치 관리가 가능하고 엔터프라이즈급 데이터 캡처 기능을 지원합니다.
완벽한 성능뿐 아니라 간편한 Mobility DNA로 모빌리티 효율성을 향상시킵니다.
이 모빌리티 솔루션은 Zebra 모바일 기기에 통합된 상용, 최종 사용자 앱, 강력한 관리 유틸리티 및 간편한 앱 개발 도구를 기반으로 가장 빠르고 간편한 모바일 성능을 지원합니다.
데이터 입력 유연성을 극대화 하기위한 업계 최고의 듀얼 모드 터치 패널
맨 손가락 및 장갑 낀 손가락 또는 맨 손가락 및 스타일러스 등 선호하는 데이터 입력 모드를 선택할 수 있어, 선명한 서명 캡처에 이상적입니다.
데이터 입력 방법을 전환할 때마다 설정을 조정해야 하는 경쟁사 장치와는 달리, 이 지능형 4.7인치 디스플레이는 필요에 따라 자동으로 조절됩니다.
업계 최고의 포괄적인 오디오 기능으로 새로운 차원의 음성 유연성 지원
대중적인 스마트폰의 음량을 최대 4배까지 증폭하고 소음 제거 기술을 제공하는 TC70/ TC75 PDA는 모든 통화마다 양쪽 사용자에게 깨끗한 오디오 품질을 선사합니다.
Workforce Connect PTT(Push-to-Talk) Express 및 Pro 지원으로 현장에서 동료와 빠르게 연결될 수 있으며 관리자 및 다른 사무 지원 인력과의 협업을 통해 고객 요구에 신속하게 대응할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 6.3 in. L x 3.3 in. W x 1.1 in. D/ 161 mm L x 84 mm W x 28 mm D
Weight : 13.3 oz./376 g
Display : 4.7 in. High Definition (1280 x 720); exceptionally bright, outdoor viewable; optically bonded to touch panel
Imager Window : Corning Gorilla Glass 2
Touchpanel : Dual mode capacitive touch with stylus or bare or gloved fingertip input (conductive stylus sold separately); Corning Gorilla Glass 2
Backlight : LED backlight
Power : PowerPrecision: Li-Ion 3.7 V, 4620 mAh
Expansion Slot : User accessible 32 GB microSD slot with SDHC and SDXC support
Network Connections : USB 2.0 High Speed (host and client); WLAN
Notification : Audible tone; multi-color LEDs; vibration
Keypad : On-screen keypad
Voice and Audio : Three microphone support with noise cancellation; vibrate alert; speaker; Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU : 1.7 GHz dual core processor
Operating System : AndroidTM AOSP 4.4.2 (KitKat)
Memory : 1 GB RAM / 8 GB Flash pSLC
WIRELESS PAN
Bluetooth Bluetooth v4.0 (Bluetooth® Smart technology)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC55 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC55 산업용PDA를 통해 효율성과 고객 서비스 개선 작업을 처리하려면 작업자에게 실시간 데이터에 대한 안전하고, 신뢰할 수 있는 원격 액세스가 필요합니다.
개인용 스마트폰, 태블릿PC 및 랩톱은 매력적이고 사용하기 쉽지만 매일 비즈니스에 사용하는 데 필요한 내구성 또는 기능성이 떨어지는 문제가 있기 때문에 포켓 크기의 지브라 TC55 산업용 PDA는 이와 같은 걱정이 없습니다.
Zebra TC55 산업용 PDA는 자주 사용되는 개인용 기기의 최근 기술에, 세련된 디자인, 사용 편의성을 바탕으로 하지만 소비자용 모델과 달리 TC55에는 데이터 캡처 기능이 통합되어 있습니다.
TC55 바코드 PDA는 산업 환경에서의 마모를 견디도록 제작되었기 때문에 현장에서 고장이 발생할 가능성이 적습니다.
기업 환경의 일상적인 업무용으로 제작
지브라 TC55 바코드 DPA는 오랜 내구성을 제공하는 기능들을 갖추고 있습니다.
낙하 및 충격 사양, IP67 밀봉 및 Corning Gorilla Glass 2 디스플레이로 인해 낙하 및 유출 시에도 안정적인 작동이 보장되어 평균 수명 3년을 쉽게 달성할 수 있습니다.
최대 데이터 입력 유연성을 갖춘 업계 최고의 이중 모드 터치 패널
원하는 데이터 입력 모드를 손가락(두꺼운 장갑 착용 유무에 상관없음)또는 서명 캡처용 스타일러스 중에서 선택할 수 있습니다.
전력 소비가 적지만 매우 밝은 4.3인치로 정전식 터치 환경의 수준을 한 차원 높여줍니다.
지브라 TC55 모바일 컴퓨터는 또한 습기가 있는 상태에서도 작동하는 WVGA 디스플레이를 제공합니다.
데이터를 자동으로 캡처하고 전체 문서를 처리합니다.
SimulScan Document Capture를 통해 작업자가 하나의 버튼만 누르면 바코드, 텍스트 필드, 전화 번호, 이미지, 서명 및 확인란을 캡처할 수 있습니다. 즉, 송장 및 주문 처리 속도가 향상됩니다.
기업용 안드로이드
모든 지브라 TC55 산업용 PDA에는 소비자 운영체제의 AndroidTM 를 더욱 강화된 기업용 운영체제로 탈바꿈시킬 수 있는 다양한 기능을 제공하는 Mobility Extensions (Mx)가 기본으로 탑재되어 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions (with standard battery) : 5.4 in. L x 2.7 in. W x 0.63 in. D/ 137 mm L x 69 mm W x 15.9 mm D
Weight With standard battery : 7.8 oz./220 g
Display : Blanview® LCD display, 4.3 in. WVGA, exceptional low power consumption, exceptionally bright image with 700 NITs, 3% transflective, Corning Gorilla Glass 3
Camera/Imager Exit Windows : Corning Gorilla Glass 3
Touchpanel : Dual mode capacitive touch with stylus or fingertip (bare or gloved) input
Backlight : LED backlight
Power :
PowerPrecision Li-Ion batteries
Two options: Extented 1.5x 4410 mAh or Standard Capacity 2940 mAh battery
Expansion Slot : User accessible 32 GB microSD slot with SDHC support
Network Connections : USB 2.0 High Speed (host and client), WLAN, WWAN and Bluetooth
Notification : Vibrate and audible tone
Keypad : On-screen keypad
Voice and Audio : 2 front facing speakers; dual noise-cancelling microphones; high-quality speaker phone; 3.5mm headset jack , Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU ; 1.5 GHz dual core processor
Operating System : Android 4.1.2
Memory : 1 GB RAM / 8 GB Flash MLC
USER ENVIRONMENT
Operating Temp. : 14°F to 122°F/-10°C to 50°C
Storage Temp. : -40°F to 158°F/-40°C to 70°C
Humidity : 5% to 85% non-condensing
Drop Specification ; 4 ft./1.2 m drop to plywood per MIL-STD 810G; With protective boot: 5 ft./1.5m to concrete at room temperature
Tumble Specification :
300 1.6 ft/0.5 m tumbles;
With protective boot: 1000 1.5ft./0.5 m tumbles; meets and exceeds IEC tumble
Thermal Shock : -40°F to 158°F/-40°C to 70°C rapid transition
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Zebra의 산업용 PDA MC9500-K는 혁신적인 인체공학적 디자인과 기능을 결합하여 아무리 까다로운 현장에서도 모빌리티 애플리케이션을 지원함으로써 고급 러그드 모바일 컴퓨팅의 기대 수준을 높였으며, 지브라만의 혁신적인 이 기기는 외양만큼이나 내부도 다릅니다.
지브라 테크놀로지를 대표하는 MC9000 바코드 PDA 시리즈를 기반으로 한 MC9500-K 는 더 견고한 설계, 더 많은 데이터 캡처 옵션, 고객이 전환할 수 있는 WAN 서브 시스템과 키패드를 통한 진정한 WAN 기술 독립성 및 애플리케이션 유연성, 더 강력한 프로세싱 성능, 배터리 및 백룸 관리에 대한 획기적인 방식을 제공하면서도 더 가볍고 날렵하며 사용하기에 간편한 외관을 갖추고 있습니다.
차세대 인체공학적 디자인
지브라 산업용PDA MC9500-K의 작고 날렵하며 손에 쥐기 편한 외관은 새로운 차원의 편의성을 제공하며 키 기반 애플리케이션을 한 손으로 쉽게 조작할 수 있습니다. 고급 LCD 기술이 적용된 동급 최고의 디스플레이로 인해 어떤 조명 조건에서도 간편하게 볼 수 있습니다.
통신업체로부터의 진정한 독립을 가능케 하는 Zebra MAX FlexWAN
백룸에서 WAN 서브시스템을 원하는 대로 바꿀 수 있어 통신업체로부터의 진정한 독립을 가능케 하는 최초의 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능은 WAN을 채택하고 필요에 따라 셀룰러 네트워크를 변경할 수 있는 유연성을 제공함으로써 전체 작업자의 통신 범위를 최적화하고, 서로 다른 네트워크에서 재배포를 가능케하고, 라이프사이클을 연장하고, 기기 사용률을 개선합니다.
Zebra MAX 키패드
백룸에서 몇 분 내에 키패드를 바꿀 수 있는 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능을 통해 MC9500-K를 손쉽게 맞춤화할 수 있어, 기기를 간편하게 업그레이드하여 업데이트되거나 새로운 애플리케이션의 요구를 충족할 수 있습니다. 또한 키패드 교체를 위해 기기를 정비 센터에 반환할 필요가 없으므로 가동 시간이 개선됩니다.
PHYSICAL CHARACTERISTICE
Dimensions : 9.2 in. H x 3.5 in. W x 2 in. D (23.36 cm H x 8.89 cm W x 5.08 cm D)
Weight : 22 oz./623 g (including battery, stylus, keypad & strap)
Display : 3.7 in. VGA Color (TFT) Display (640 x 480) with touch panel and backlight
Keypad Options : Modular: alpha primary; numeric telephony, numeric calculator, alpha numeric
Expansion Slot : microSD slot - supports up to 32 GB
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 806 MHz
Operating System : All models except MC959B: Windows Mobile 6.5
Memory : 256MB RAM/1GB Flash
BATTERY
Capacity : Rechargeable Lithium Ion 4800 mAh battery @ 3.7V – with State of Charge and State of Health indicators
Standby Time : 150 hours
Talk Time : 8 hours (minimum/suspend mode)
DATA CAPTURE
Scanning : 1D Scanner; 2D Imager; 3 MP auto-focus flashenabled digital color camera with symbology decode software
Scan Angle : Optimized for scanning (15° downward angle)
Options : Integrated Magnetic Stripe Reader (MSR) with encrypted head (optional)
COLOR CAMERA
Resolution : 3 megapixel
Illumination : User controllable flash
Lens : Autofocus
1D LASER SCANNER (SE950)
Range on 100% UCPA : 24 in./60 cm
Resolution : 4 Mil minimum element width
Roll : ±35° from vertical
Pitch Angle : ±65° from normal
Skew Tolerance : ±50° from normal
Ambient Light Immunity : LED: 450 Ft Candles (4,844 Lux), Sunlight: 8000 Ft Candles (86,111 Lux)
Scan Rate : 104 (±12) scans/sec (bi-directional)
Scan Angle : 47° ±3° default; 35° ±3° reduced
2D IMAGER (SE4500SR)
Focal Distance : From center of exit window: SR – 7.5 in./19 cm
Sensor Resolution : 752 x 480 pixels
Field of View Horizontal : 40°; Vertical: 25°
Skew Tolerance : ±60°
Pitch Tolerance : ±60°
Roll Tolerance : 360°
Ambient Light Immunity : 9,000 ft. candles/96,900 lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
견고한 지브라 MC67 산업용PDA 시리즈를 사용하여 보다 빠르고 스마트한 작업에 필요한 도구를 현장 근무자에게 제공하십시오.
작업자는 완벽한 기능을 갖춘 이 기기를 사용하여 백엔드 시스템의 정보에 액세스하고 조건에 관계없이 거의 모든 바코드를 스캔할 수 있으며 문서를 캡처하여 간편하게 기록을 보관할 수 있습니다. 또한 실시간 수리 지원을 위해 동영상과 사진을 촬영, 전송할 수 있으며 도착 창에서 고객에게 전화를 할 수 있습니다.
현장 업무에 최적화된 지브라의 MC67 바코드PDA는 보다 많은 작업, 예를들어 장비수리, 물품픽업 또는 배송, 주문접수, 건물 또는 레스토랑 점검, 고지서 발행 또는 경쟁 정보 수집 등을 수행하는 모바일 컴퓨터입니다.
MC67 Base 모델
비용 효과적인 라인 확장을 통한 현장 근무자의 생산성 향상
MC67 Base는 MC67 시리즈의 비용대비 효과적인 확장입니다.
튼튼한 보급형 플랫폼을 찾는 고객들에게 MC67 Base는 현장 근로자에게 생산성을 높일 수 있는 모든 기능을 제공하며 MC65 및 MC55 액세서리와 역호환이 될 뿐 아니라 MC67 프리미엄 버전으로 귀사 시스템에 액세스할 수 있도록 지원합니다.
Windows® Embedded Handheld 6.5가 실행되는 MC67 Base는 복잡한 애플리케이션, 유연한 고속 이동통신 및 Wi-Fi 무선 연결을 지원하고 거의 모든 유형의 데이터를 캡처할 수 있습니다.
결과는? 향상된 고객 서비스. 고객 만족도 제고. 고객 유지 가능성 증대.
MC67 Premium 모델
작업자가 작업을 수행하는 데 필요한 모든 기능 제공
MC67 Premium을 사용하는 경우 모빌리티 전략을 가장 효과적으로 지원하는 운영 체제(Windows® Embedded Handheld 6.5 또는 Android™ Jelly Bean 4.1)를 선택하여 다양한 비즈니스 시스템 정보에 빠르게 액세스함으로써 작업 효율성과 정확성을 향상시킬 수 있습니다.
수리가 필요한 장비를 촬영한 동영상 클립을 보내 내부 전문가 또는 장비 제조업체로부터 즉시 조언을 얻습니다.
고해상도 스냅 사진으로 상황을 기록, 바코드를 스캔하여 사용 중인 부품을 빠르고 정확하게 추적하며 중요 문서는 캡처합니다.
고객에게 전화를 걸어 도착 시간 창을 업데이트합니다. 이메일을 확인하고 답장을 보냅니다.
또한 현재 MC65를 사용하는 경우 대부분의 기존 MC55/MC65 액세서리와의 백워드 호환성에 따라 최신 모바일 컴퓨팅 기술로의 비용 효율적인 업그레이드가 가능합니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.38 in. L x 3.03 in. W x 1.32 in. D (162.2 mm L x 77 mm W x 33.5 mm D)
Weight : 13.5 oz./385 g (with rechargeable 3600mAh Lithium Ion battery)
Display : 3.5 in. color VGA display, touch, 640 x 480 portrait, 650+ NIT s
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh battery
Backup Battery : Ni-MH battery (rechargeable) 15mAh 3.6V nominal (not user-accessible or replaceable)
Expansion Slot : Micro SD card slot (supports up to 32GB)
Communication : Interface: USB 2.0 high speed (host and client)
PERFORMANCE CHARACTERISTICS
CPU : Dual core 1GHz OMAP 4 processor
Operating System : Microsoft® Embedded Handheld 6.5 Professional
Memory : 256 MB RAM/2 GB Flash
DATA CAPTURE
Options :
2D SE4500-SR imager
2D SE4500-SR imager + 8 MP Camera
2D SE4500-DL imager + 8 MP Camera
2D SE4500-DL imager
2D SE4500-DPM/HD + 8 MP camera
Data Types : 1D/2D bar codes, photographs, video, signatures and documents
WIRELESS VOICE AND DATA COMMUNICATIONS
WAN Radio : 4G HSPA+ Frequency band: UMTS/HSDPA and HSUP A - 850, 900, 1900 and 2100 MHz; GSM/EDGE: 850, 900, 1800 and 1900 MHz
WLAN : Push-to-talk (PTT ); VoIP -ready
INTEGRATED GPS
Integrated standalone and Assisted-GPS (A-GPS): SUPL 1.0
WIRELESS PAN AND DATA COMMUNICATIONS
Bluetooth Class II , v2.1 with Enhanced Data Rate (EDR)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC55A0-HC 2D 헬스케어PDA 의료용모바일컴퓨터 산업용PDA 바코드PDA 매뉴얼HION IT
지브라 MC55A0-HC 헬스케어 PDA는 차세대 의료 모빌리티를 위해 소독이 가능한 견고한 의료용 모바일 컴퓨터로 휴대하기 쉽고 사용하기 쉬우며 환자 모니터링이 간편한 산업용PDA입니다.
MC55A0-HC 헬스케어 바코드 PDA는 병원용으로 설계되어 있어 일상적인 낙하와 충돌을 견딜 뿐만 아니라 환자용으로 사용한 후 소독도 가능합니다. 또한 강력한 무선 애플리케이션 성능과 무선 네크워크 옵션을 통해 의료 서비스 제공자가 이동 중에 환자 기록 액세스를 통해 환자 모니터링에 집중하고, 약을 정확히 투여하며, 환자의 활력 징후를 관찰하고, 검사실과 조제실에 지시하며, 검사 결과를 열람하는 등의 일을 모두 몇 초만에 병원 내 어디에서든 할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.78 in. L x 3.03 in. W x 1.1 in. D (14.7 cm L x 7.7 cm W x 2.8 cm D)
Weight : 11.9 oz./338 g (including standard battery)
Display : PenTile® 3.5 in Color VGA, super bright 650+ NITS
Touch Panel : Glass analog resistive touch
Display : Backlight LED backlight
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh Smart Battery
Backup Battery : Ni-MH battery (rechargeable) 18mAh 2.4V (not user accessible)
Expansion Slot : microSD slot with SDHC Support (maximum 32GB)
Comm. Interface : USB 1.1 host and client
Keypad Options : QWERTY; Numeric
Audio : VoWLAN; support for Bluetooth headsets; handset and speaker phone modes
PERFORMANCE CHARACTERISTICS
CPU : Marvell™ PXA 320 @ 806 MHz processor
Operating System : Microsoft® Windows Mobile ® 6.5 Classic
Memory : 256MB RAM; 1GB Flash
USER ENVIRONMENT
Operating Temp. : 14° F to 122° F/-10° C to 50°C
Storage Temp. : -40° F to 158° F/-40° C to 70° C
Humidity : 95% non-condensing
Drop Specification : Multiple 6 ft./1.8 m drops per MIL-STD 810G specifications
Tumble Specification : 1,000 1.6 ft./0.5 m tumbles (2,000 hits)
Sealing : IP64 per IEC sealing specifications
Clock : ntegrated real time clock
Electrostatic Discharge (ESD) : 15KV Air; 8KV Touch
BATTERY PERFORMANCE
User Profiles Minimally 8 hours based on 600 scans and WLAN transmits per hour with display on and standard capacity battery
DATA CAPTURE OPTIONS
Options 2D SE4500-DL imager; 3.2 MP auto-focus flash-enabled digital color camera; captures 1D and 2D bar codes, color photographs and video, signatures and documents
REGULATORY
Electrical Safety : Certified to UL/cUL 60950-1, IEC/EN60950-1
Environmental : RoHS-compliant
WLAN and Bluetooth (PAN) : USA: FCC Part 15.247, 15.407 Canada: RSS-210, RSS 310 EU: EN 300 328, EN 300 440-2, EN 301 893 Japan: ARIB STD-T33, ARIB STD-T66, ARIB STD-T70 & T71 Australia: AS/NZS 4268
RF Exposure : USA: FCC Part 2, FCC OET Bulletin 65 Supplement C Canada: RSS-102 EU: EN 50392 Australia: Radiocommunications Standard 2003
EMI/RFI : North America: FCC Part 15, Class B Canada: ICES 003 Class B EU: EN55022 Class B, EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 60601-1-2
Laser Safety : IEC/Class 2/FDA ll in accordance with IEC60825-1 /EN 60825-1
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC18 2D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
매장 방문 고객의 쇼핑 경험을 혁신적으로 개선한 지브라 MC18 산업용 PDA 퍼스널 쇼퍼로 쇼핑을 즐길 수 있는 고객 환경을 선사하십시오.
이 스마트폰형 첨단 모바일 컴퓨터는 고객에게 실시간 연결을 지원하여 진정한 가치를 선사합니다.
안드로이드 롤리팝 및 Zebra의 Mx(Mobility Extensions) 옵션으로 소비자용 안드로이드를 진정한 엔터프라이즈급 운영체제로 전환하는 일련의 기능이 추가되었습니다.
고객의 쇼핑 경험을 혁신적으로 개선
지브라 MC18 바코드 PDA 퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
Zebra MC18 산업용 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC18 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처할 수 있습니다.
지브라의 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 2.95 in. H x 8.58 in. L x 3.09 in. W/ 7.50 cm H x 21.80 cm L x 7.86 cm W
Weight : 10.6 oz./300 g (with battery)
Display : Color LCD; 4.0 inch 480x800 WVGA resolution; 16 bits/pixel RGB; LE D backlight; capacitive touch screen; Corning Gorilla Glass 3
Keyboard : 1 dedicated trigger key
Power Source : PowerPrecision+ 2725 mAh Li-Ion rechargeable battery
PERFORMANCE CHARACTERISTICS
Processor : TI OMAP 4430, Dual Core, 800MHz
Operating System :
Windows Embedded Compact 7
Microsoft Internet Explorer Embedded 7
Memory : 512 MB RA M/2 GB Flash or 1 GB RA M/4 GB Flash
Interface/Communications : USB 2.0 Client for Microsoft ActiveSync for service and maintenance
Light Source : Red LED Illumination with LED dot aim pattern
Scan Rate : Imaging rate: 30 Frames per second, 1280p x 800p
Ambient Light Immunity : Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED: 450 Ft. Candles (4,844 Lux) Sunlight: 8,000 Ft. Candles (86,111 Lux)
WIRELESS SECURITY
Wi-Fi Security Certification : Legacy, WPA and WPA 2
Authentication : None, EAP-TTLS (CHAP, MSCHAP, MSCHAPv2, PAP , MD5), EAP-TLS, PEAP (TLS, MSCHAPv2, GTC), LEAP and EAP-FAST (TLS, MSCHAPv2, GTC)
Encryption : WEP (40 or 104 bit), TKIP and AES
USER ENVIRONMENT
Operating Temperature : 32° to 104° F/0° to 40° C
Storage Temperature : 4° to 140° F/-20° to 60° C
Humidity : 40° C (RH 10% - 95%) non-condensing
Drop Specification : Withstands multiple 4 ft./1.2 m drops to vinyl tile over concrete
Tumble Specification : 1,000 0.5 m/1.64 ft. tumbles at room temperature
WIRELESS NETWORKING
WLAN : Wi-Fi IEEE 802.11a/b/g/n
WPAN : Bluetooth Class 1.5 2.1+EDR/ Bluetooth 4.0 with Bluetooth SMART technology
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PX4i PX6i 열전사감열 RFID 산업용 바코드프린터 매뉴얼HION IT
인터맥, EasyCoder PX (PX4i, PX6i) 시리즈 바코드프린터는 까다로운 산업환경에 맞게 설계된 견고한 금속의 고성능 프린터로, 24시간 작동을 지원합니다.
개방된 모듈식 디자인은 프린터가 쉽게 적응, 유지보수 및 서비스를 제공받을 수 있도록 합니다.
인터맥 PX 시리즈, PX4i 및 PX6i 산업용 바코드 프린터는 각각 4인치 또는 6인치의 최대 인쇄폭 기능이 특징입니다.
제조업 환경에서의 간편한 통합을 위해 설계된 PX 시리즈 산업용 프린터는 사실상 어떠한 위치라도 장착할 수 있습니다.
다기능성 폼 팩터가 라벨 자동부착기 같은 주변장치와의 연결을 용이하게 합니다.
인터맥 EasyCoder PX 시리즈 프린터는 사용자 정의 프로그램을 실행, 독립적으로 작동할 수 있어서 PC가 필요하지 않습니다.
최대 7개의 유선 및 무선 연결 인터페이스를 통해 스캐너, 스케일, 기타 프린터 및 컨베이어를 포함한 생산라인 기계장치에서 작동할 수 있을 뿐만 아니라 네트워크 호스트에서 정보에 직접 액세스할 수 있습니다.
최대의 성능 및 인쇄품질- 분당 최대 115개까지 6인치 길이의 컴플라이언스 라벨 인쇄
견고한 금속 구조로 열악한 산업환경에서도 24시간 / 7일 인쇄제공
변화하는 호스팅 환경 및 응요운야에 쉽게 적응
자동화된 라벨 부착 응용분야의 통합을 위한 모듈화 디자인
PC 비용을 들이지 않는 독립형 프린터 응용지원
IPL 또는 Fingerprinter/DP 프린터 명령 언어 선택
203, 300 또는 400 dpi 인쇄 해상도의 선택 사항을 제공하는 교체 가능한 프린트 헤드
PHYSICAL CHARACTERISTICS
LxHxW : 482 x 238 x 275 mm (19.0 x 9.4 x 10.8 in)
Weight : 12.85 kg (28.4 lbs)
PRINT SPECIFICATIONS
Max. Print Width : 112 (DT)/110 (TT) mm (4.4/4.3 in)
Max. Length :
4095 mm (161 in) at 203 dpi
2775 mm (109 in) at 300 dpi
1016 mm (40 in) at 406 dpi
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC
Generation 2
865-928 MHz radio configured to comply with local UHF RFID regulations including FCC and ETSI.
Contact local representative for availability in particular region.
PRINT SPEED
100 - 300 mm/s (4 - 12 ips) for 203/300dpi
100 - 250 mm/s (4 - 10 ips) for 406 dpi
MEDIA
Labels & Tags :
Max/Min Width : 120/ 25.4mm (4.72/ 1 in)
Thickness : 2.4 to 10.0 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter : 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Ribbons :
Roll Max Diameter : 80 mm (3.15in), approx. 450m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/ XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop, Applicator Interface
Wireless :
IEEE 802.11 b/g
Wi-Fi Certified, Cisco® Compatible (CCX) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAPTTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols : TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included. Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PM4i 열전사감열 RFID 바코드프린터 산업용프린터 매뉴얼HION IT
다기능 PM4i는 최신 RFID 기술과 함께 Intermec의 바코드프린터에서 사용자들이 기대해왔던 신뢰성 및 견고성과 함께 뛰어난 성능을 제공합니다.
기업들은 PM4i를 통해 RFID 어플리케이션을 구동시켜 RFID 스마트 라벨을 생성기킬 수 있습니다.
PM4i는 가변 주파수 RFID Tag 를 사용함으로써 전세계에서 사용할 수 있는 라벨 인코딩과 인쇄를 동시에 할 수 있으며, 이를 통해 지역 표준에 따라 달라지는 여러 주파수 Tag 를 읽을 수 있습니다.
PM4i 는 완벽한 프린터 독립성 어플리케이션에 대한 사용자 정의 프로그램을 실행하는 "스마트 클라이언트"의 역할도 할 수 있습니다.
PM4i 프린터는 PC 필요없이 추가적인 하드웨어(예, 스캐너, 다른 프린터, 컨베이어)를 작동시킬 수 있고, 네트워크 호스트로부터 정보에 접근할 수 있으며, 기능 추가를 위한 어플리케이션으로도 변경시킬 수 있습니다.
통합 EasyLAN 이더넷, USB, 직렬 연결은 PM4i와의 기본 인터페이스 입니다.
사용자는 추가적인 EasyLAN 무선 및 산업용 인터페이스 보드를 선택할 수 있습니다.
EasyLAN 무선 인터페이스는 통합 표준 802.11b 무선 통신을 사용합니다.
네트워크를 통해 이 무선 통신은 중계된 정보의 128-bit WEP 암호화를 제공합니다.
Intermec의 유선 및 무선 기술은 보안 인쇄와 모든 환경에 대한 네트워크 인프라를 보장합니다.
PM4i 바코드프린터는 공급망 전체에 걸쳐 신속하고 정확한 데이터 수집을 위해 모든 물품들이 RFID를 통해 라벨이 주어지고, 추적된다는 것을 보장하며, 제조업, 창고업 및 물류업 용도에 적합하도록 설계되었습니다.
향후 RFID 표준으로서의 UHF Gen 2를 지원
향후 RFID 표준 발전을 지원하기위한 고유 제품기능으로 고객 투자보호
주파수 가변 UHF Tag를 인코딩하는 최초의 RFID 프린터
바코드, 판독 가능한 택스트, 그래픽을 동시인쇄
독립형 프린터 어플리케이션 지원
통합 EastLAN 이더넷, USB, 직렬 인터페이스 표준
EasyLAN 무선 인터페이스(옵션)
DESCRIPTION
Direct thermal and thermal transfer label, ticket and tag printer. Also available with RFID.
PHYSICAL CHARACTERISTICS
LxHxW : 543 x 261 x 298mm (21.38 x10.28 x 11.73 in)
Weight : 13.5 kg (29.76 lbs.)
PRINT SPECIFICATIONS
Max. Width : 104 mm (4.09 in) at 203 dpi and 406dpi; 105.7 mm (4.16 in) at 300 dpi.
Max. Length : 4095 mm (161.2 in) at 203 dpi; 2730 mm (107.5 in) at 300 dpi. 1016 mm (40 in) at 406 dpi.
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC Class 1 Generation 2, 865-928 MHz radio configured to comply with local UHF FID regulations including FCC and ETSI. Contact local representative for availability in particular regions.
PRINT SPEED
100 - 200 mm/s (4 - 8 ips) variable (203 dpi)
100 - 150 mm/s (4 - 6 ips) variable (300/406 dpi)
PRINT RESOLUTION
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
16 dots/mm (406 dpi)
MEDIA
Type : Labels and Tags
Max/Min Width : 114.3 /25.4 mm (4.5 /1 in)
Thickness : 2.5 to 8.7 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diamete r: 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 82 mm (3.2 in), approx. 450m
Core ID : 25.4 mm (1 in)
Type : Wax, mid-range, resin
MEMORY
Standard : 16MB Flash memory, 32MB SDRAM, 1 Compact Flash slot
Available : 1GB CompactFlash memory, multi-GB USB memory device (FAT16/FAT32 USB drivers supported)
POWER SUPPLY
AC Voltage : 90 to 265 VAC, 45 to 65Hz
PFC Regulation : IEC 61000-3-2
Power Consumption : Standby 15W; Peak 300W
OPERATING ENVIRONMENT
Ambient Operating Temperature : +5°C to +40°C (+41°F to +104°F)
Storage Temperature : -20°C to +70°C (-4°F to +152°F)
Humidity : 20 to 80% non-condensing
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PF2i PF4i 열전사감열 바코드프린터 산업용프린터 매뉴얼HION IT
컴팩트한 PF2i, PF4i 미드 레인지 바코드프린터는 인터맥의 스마트하고 강하고 안전한 산업용 프린터 제품입니다.
Intermec SmartSystems ™ 및 Wavelink Avalanche ™를 통해 PF2i의 통합 장치관리 및 진단 기능은 가동 중단 시간을 줄이고 설치를 단순화합니다
견고한 All-Metal PF2i 바코드프린터는 다운 타임을 줄이고 유지 보수 비용을 최소화하는 기능을 통합합니다.
작은 크기에도 불구하고 PF2i는 풀 사이즈 라벨 롤 (최대 8.4 in / 213 mm)을 사용하여 용지 교체 횟수를 줄입니다.
QuickMount ™ 프린트 헤드 디자인 덕분에 프린트 헤드를 빠르고 쉽게 교체 할 수 있습니다.
최고 수준의 보안 무선 연결 (WPA2)을 포함한 여러 보안 인터페이스 옵션을 사용할 수 있습니다.
업계 유일의 프린터인 WiFi- 및 CCX-Certification과 함께 사용할 수있는 인터맥 산업용 프린터는 무선 네트워크 무결성을 유지하고 구성 시간을 단축시킵니다.
모든 프린터는 이더넷 연결 및 출현하는 네트워크 프로토콜 IPv6과 함께 제공되므로 장기간의 엔터프라이즈 확장성을 보장합니다.
기타 연결 옵션 - 표준 RS232 및 USB 포트, 옵션 병렬, 이중 직렬 또는 산업용 인터페이스는 통합 유연성을 추가로 제공합니다.
Strong, all-metal construction and superior throughput for harsh industrial environments
Compact size fits space- constrained applications
Smart Printing capabilities support stand-alone printer applications, eliminating PC expense and complexity
All-in-one, user-selectable printer languages Fingerprint/Direct Protocol (DP), IPL, ZSim and DSim in every printer
Secure wireless connectivity : CCX and WiFi® certified with WPA2
Integrated Ethernet, USB host and device, and serial interface standard
Internet Protocol v6 (IPv6) support
PHYSICAL CHARACTERISTICS
Length : 397 mm (15.6 in)
Height : 178 mm (7 in)
Height (big top) : 205 mm (8.1 in)
Width : 194 mm (7.6 in)
Weight : 5.5 kg (12 lbs.)
PRINT SPECIFICATIONS
Max. Width: 56 mm (2.2 in)
Max. Length: 4095 mm (161.2 in)
Print Speed : 100 ? 200 mm/s (4 - 8 ips) variable
Print Resolution : 8 dots/mm (203 dpi)
MEDIA
Type : Labels & Tags
Max/ Min Width : 60/25.4 mm (2.36/1 in)
Thickness : 3.0 to 7.5 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter (long door): 152.4 mm (6 in)
Label Roll Max Diameter (short door): 213 mm (8.38 in)
Label Roll Core: 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 65 mm (2.56 in), approx. 225m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop
Wireless:
IEEE 802.11 b/g
Wi-Fi Certified, CCX (Cisco®) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAP- TTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols :
TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 INTERMEC PD43 PD43c 2D 열전사 산업용 바코드프린터 매뉴얼HION IT
경공업 (Light Industrial) 산업에 적합한 열전사 인쇄타입의 PD43, PD43c 바코드 프린터는 설치공간이 협소한 얕은 조리대 및 인출 타입의 캐비넷 공간에서의 설치사용이 용이한 혁신적인 인쇄 성능을 제공합니다.
인터맥 PD43, PD43c 바코드 프린터 물류센터 및 배송센터, 물류창고, 항공기내 승객서비스 등에 적합하며, 외형은 금속재질, 강력한 캐스트알루미늄 인쇄 메커니즘, 프린터 헤드 및 롤러 교체시 도구 필요없어 다운타임을 최소화 하도록 설계되었습니다.
Intermec PD43은 호스트 컴퓨터가 없어도 설정을 쉽게 구성, 구성 및 미세 조정할 수있는 컬러 그래픽 디스플레이를 제공합니다.
실제로 스마트 인쇄 기능을 통해 PD43 은 프린터 내부에서 바로 응용 프로그램을 실행할 수 있으므로 연결된 PC가 필요하지 않습니다.
Incredibly Compact: Small footprint for installation into compact tabletops and pull-out cabinets.
Built Strong: Rugged metal chassis and print mechanism provide investment protection.
Easy to Use: Intuitive, ten-language color display or icon interface simplifies setup and maintenance.
uilt-In Command Languages: Fast, friendly and complete printer emulation-including ZSim2, our most comprehensive ZPL-II® emulation ever-makes upgrading from other printer brands easy.
Smart Printer: Run apps right inside the printer, control peripherals, and eliminate the need for a connected PC, using either C# for Printers or Fingerprint.
Maintenance Made Easy: Completely tool-free printhead and platen roller replacement.
Broad Media Compatibility: Supports half- and one-inch ribbon cores, ink-in or ink-out.
Co-Engineered Media: Extensively tested with Intermec co-engineered media products, ensuring optimized performance. Compatible with Honeywell's broad range of media products.
Available Accessories: Customize with a wide range of available accessories such as a Wi-Fi/Bluetooth® module and cutter.
PHYSICAL CHARACTERISTICS
Length ;
PD43 with Standard Door : 470 mm (18.5 in)
PD43 with Flat Top Door : 470 mm (18.5 in)
PD43c : 236 mm (9.3 in)
PD43c with Optional External Media Holder : 432 mm (17.0 in)
Width ;
PD43 with Standard Door : 211 mm (8.3 in)
PD43 with Flat Top Door : 211 mm (8.3 in)
PD43c : 211 mm (8.3 in)
PD43c with Optional External Media Holder : 211 mm (8.3 in)
Height ;
PD43 with Standard Door : 249 mm (9.8 in)
PD43 with Flat Top Door : 209 mm (8.2 in)
PD43c : 205 mm (8.1 in)
PD43c with Optional External Media Holder : 217 mm (8.5 in)
Weight ;
PD43 with Standard Door : 8.4 kg (18.5 lbs)
PD43 with Flat Top Door : 8.3 kg (18.3 lbs)
PD43c : 5.1 kg (11.2 lbs)
PD43c with Optional External Media Holder : 6.0 kg (13.2 lbs)
PRINT SPECIFICATIONS
Max Print Width : 104 mm (4.1 in)
Print Speed : 203 mm/s (8.0 ips) @ 8.0 dpmm (203 dpi), 152 mm/s (6.0 ips) @ 11.8 dpmm (300 dpi)
Resolution : 8.0 dpmm (203 dpi), 11.8 dpmm (300 dpi)
Media Compatibility
Max. Media Diameter (OD) ;
PD43 with Standard Door : 213 mm (8.375 in)
PD43 with Flat Top Door : 152 mm (6.0 in)
PD43c with External Media Holder : 203 mm (8.0 in)
Media Core Sizes (ID) : 1, 1.5, 3 in
Media Width : 19 mm (0.75 in) to 118 mm (4.65 in)
Label Length : 6.4 mm (0.25 in) to 172.7 cm (68.0 in)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
5. - iii -
Contents
Contents
Preface..........................................................................................................iv
Declaration of Conformity....................................................................................iv
CE................................................................................................................iv
FCC Class B................................................................................................iv
RoHS.............................................................................................................v
SVHC / REACH.............................................................................................v
Safety Symbols....................................................................................................vi
Important Safety Instructions...............................................................................vi
General Cleaning Tips....................................................................................... viii
Cleaning Tools............................................................................................ viii
Recommended Cleaning Procedures..........................................................ix
Disposing of the Equipment..................................................................................x
Additional Information & Technical Support.........................................................xi
Warranty...............................................................................................................xi
Chapter 1 Introduction.................................................................................1
1.1 Product Highlights...........................................................................................2
1.2 Package Contents...........................................................................................2
1.3 Parts of the Device..........................................................................................3
1.4 Dimensions.....................................................................................................4
1.5 Specifications..................................................................................................5
Chapter 2 Installation...................................................................................7
2.1 SIM Card Installation.......................................................................................8
2.2 Power Connection...........................................................................................8
2.3 Mounting the Device.......................................................................................9
2.4 Connector Pintouts.........................................................................................9
2.4.1 PWPIN.................................................................................................9
2.4.2 GPIO and CAN Bus.............................................................................9
Chapter 3 Using the Device.......................................................................11
3.1 Power On/Off the Device..............................................................................12
3.2 Home Screen................................................................................................12
3.3 Configurations...............................................................................................13
6. - iv -
Preface
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certificate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specifications when
shielded cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from AMobile. Please contact
your local supplier for ordering information.
FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the guarantee of this
device could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and receiver.
Preface
7. - v -
Preface
•• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician for help.
RoHS
AMobile Intelligent Corporation certifies that all components in its products
are in compliance and conform to the European Union’s Restriction of Use
of Hazardous Substances in Electrical and Electronic Equipment (RoHS)
Directive 2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main purpose
of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
AMobile Intelligent Corporation hereby states that the listed products do not
contain unintentional additions of lead, mercury, hex chrome, PBB or PBDB
that exceed a maximum concentration value of 0.1% by weight or for cadmium
exceed 0.01% by weight, per homogenous material. Homogenous material
is defined as a substance or mixture of substances with uniform composition
(such as solders, resins, plating, etc.). Lead-free solder is used for all
terminations (Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the
earth we live, AMobile hereby confirms all products comply with the restriction
of SVHC (Substances of Very High Concern) in (EC) 1907/2006 (REACH
--Registration, Evaluation, Authorization, and Restriction of Chemicals)
regulated by the European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)
8. - vi -
Preface
Safety Symbols
This symbol of “CAUTION” indicates that there is a danger of injury to
the user or a risk of damage to the product, should warning notices be
disregarded.
This symbol indicates electrical warning.
Important Safety Instructions
Read these safety instructions carefully:
1. Read all cautions and warnings on the equipment.
2. Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage
3. Make sure the correct voltage is connected to the equipment.
4. For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
5. Keep this equipment away from humidity.
6. Disconnect this equipment from the A/C outlet before cleaning it. Use a
moist cloth. Do not use liquid or sprayed detergent for cleaning.
7. To fully disengage the power to the unit, please disconnect the power from
the AC outlet.
8. Do not scratch or rub the screen with a hard object.
9. Never use any of the solvents, such as Thinner Spray-type cleaner, Wax,
Benzene, Abrasive cleaner, Acid or Alkaline solvent, on the display. Harsh
chemicals may cause damage to the cabinet and the touch sensor.
10. Remove dirt with a lightly moistened cloth and a mild solvent detergent.
Then wipe the cabinet with a soft dry cloth.
11. The openings on the enclosure are for air convection and protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
12. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
9. - vii -
Preface
13. If the equipment will not be used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
14. Never pour any liquid into openings. This may cause fire or electrical
shock.
15. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
16. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
17. The sound pressure level at the operator’s position, according to IEC 704-
1:1982, is no more than 70dB(A).
18. Keep this User’s Manual for later reference.
19. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW
-10° C (14° F) OR ABOVE 75° C (158° F). THIS MAY DAMAGE THE
EQUIPMENT.
10. - viii -
Preface
Do not use the power adapter that isn’t made for the equipment.
Supplying the equipment with inappropriate voltage may cause harm to
or burn the equipment.
To prevent possible hearing damage, do not listen at high volume
levels for long periods
General Cleaning Tips
You may need the following precautions before you begin to clean the device.
When you clean any single part or component for the device, please thoroughly
read and understand the details below.
1. We strongly recommended that you should shut down the system before
you start to clean any single components.
2. When you need to clean the device, please rub it with a piece of dry cloth.
3. Be cautious of the tiny removable components when you use a vacuum
cleaner to absorb the dirt on the floor.
4. Never drop the components inside the device or get circuit board damp or
wet.
5. Be cautious of all kinds of cleaning solvents or chemicals when you
use it for the sake of cleaning. Some individuals may be allergic to the
ingredients.
6. Try not to put any food, drink or cigarette around the device.
Cleaning Tools
Although many companies have created products to help improve the process
of cleaning your devices and peripherals, users can also use household items
to clean their devices and peripherals. Below is a listing of items you may
need or want to use while cleaning your devices or peripherals. Keep in mind
that some components in your device may only be able to be cleaned using
a product designed for cleaning that component, if this is the case it will be
mentioned in the cleaning.
11. - ix -
Preface
• Cloth: A piece of cloth is the best tool to use when rubbing up a
component. Although paper towels or tissues can be used on most
hardware as well, we still recommend you to rub it with a piece of cloth.
• Water or rubbing alcohol: You may moisten a piece of cloth a bit
with some water or rubbing alcohol and rub it on the device. Unknown
solvents may be harmful to the plastics parts.
• Vacuum cleaner: Absorb the dust, dirt, hair, cigarette particles, and
other particles out of the device can be one of the best cleaning
methods. Over time, these items can restrict the airflow in a device and
cause circuitry to corrode.
• Cotton swabs: Cotton swaps moistened with rubbing alcohol or water
are excellent tools for wiping hard to reach areas in your keyboard,
mouse, and other locations.
• Foam swabs: Whenever possible, it is better to use lint-free swabs such
as foam swabs.
Recommended Cleaning Procedures
1. Close all application programs
2. Close operating software
3. Turn off the equipment
4. Remove all peripherals
5. Disconnect the power cable
6. Proceed to clean.
12. - x -
Preface
Disposing of the Equipment
•• Within the European Union
EU-wide legislation, as implemented in each Member State,
requires that waste electrical and electronic products carrying
the mark (left) must be disposed of separately from normal
household waste.
This includes monitors and electrical accessories, such as signal cables or
power cords. When you need to dispose of your display products, please
follow the guidance of your local authority, or ask the shop where you
purchased the product, or if applicable, follow any agreements made
between yourself. The mark on electrical and electronic products only
applies to the current European Union Member States.
•• Outside the European Union
If you wish to dispose of used electrical and electronic products outside the
European Union, please contact your local authority so as to comply with
the correct disposal method.
13. - xi -
Preface
Additional Information & Technical Support
You can download the related technical documents such as datasheet and
user’s manual as well as driver on our website.
Please do not hesitate to call or e-mail our customer service when you still
cannot get the information you need.
http://amobile-solutions.com/web_en/contact.php
E-mail: support@amobile.com.tw
Warranty
This product is warranted to be in good working order during the warranty
period. Should this product fail to be in good working order at any time during
this period, we will, at our option, replace or repair it at no additional charge
except as set forth in the following terms. This warranty does not apply to
products damaged by misuse, modifications, accident or disaster.
Vendor assumes no liability for any damages, lost profits, lost savings or any
other incidental or consequential damage resulting from the use, misuse of, or
inability to use this product. Vendor will not be liable for any claim made by any
other related party.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and fitness for a particular
purpose, with respect to the hardware, the accompanying product’s manual(s)
and written materials, and any accompanying hardware. This limited warranty
gives you specific legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or
faxing the vendor and requesting a Return Merchandise Authorization (RMA)
number. Returned goods should always be accompanied by a clear problem
description.
16. - 2 -
Introduction
1.1 Product Highlights
•• Android 5.1 operating system
•• Dual-core ARM Cortex-A7 1.0GHz
•• Front bezel IP65 water and dust resistance
•• Flat and ultra-thin front bezel with 5" TFT LCD
•• Built-in CAN 2.0b/ OBD-II
•• Support 10/100 Mbps Ethernet
•• Built-in WWAN, WLAN, GPS and Bluetooth
•• 12~24V Wide-range voltage DC-input support
1.2 Package Contents
Upon opening the package, carefully inspect the contents. If any of the items
is missing or appears damaged, contact your local dealer or distributor. The
package should contain the following items:
IOT-500 Risc-Based Panel PC
DC power adapter w/ 2-pin power terminal
User Manual
17. - 3 -
Introduction
1.3 Parts of the Device
13 14
4
1 57
68
9 10 11 12
15
23
1 2.0 megapixel camera 9 10/100 Mbps RJ-45 LAN port
2 Microphone 10 2 x USB 2.0 ports
3
5-point projected capacitive touch
screen
11 DB-9 RS-232/422/485 port
4 Integrated 0.8W speaker 12
Power/Resset button
• Press and hold to power on/off the device.
• Press to suspend or resume the device.
5
4x 3.3V DIO,
1 x CAN 2.0b / OBD-II
13
Wi-Fi / Bluetooth antenna
*Remove the protective cap to attach the
antenna.
6
2-pin DC terminal, 12V~24V auto-
detection
14
3G antenna
*Remove the protective cap to attach the
antenna.
7 SIM card slot 15 VESA 50 mounting holes (M3 size)
8 Reserved for S/W test or upgrade
19. - 5 -
Introduction
1.5 Specifications
System
CPU Dual-core ARM Cortex-A7 1.0GHz
OS Android™ v5.1
Memory 512MB LPDDR2
Flash 4GB eMMC
Peripherals and Devices
Front Camera 2.0 megapixel camera
Sensor Magnetometer (M-Sensor)
Audio
1 x built-in speaker (0.8W)
1 x built-in microphone
Wireless
WLAN Integrated IEEE 802.11 a/b/g/n/ac
Bluetooth Bluetooth 4.1 (BLE, HS compliant)
WWAN
2G GSM/GPRS/EDGE (Band 850 / 900 / 1800 / 1900)
3G WCDMA/HSPA+ (Band 1,2,5,8)
GPS GPS/GLONASS/Beidou
I/O Interface
CAN CAN 2.0b / OBD-II
USB Port 2 x USB 2.0 High Speed
LAN 1 x 10/100 Mbps
RS-232 1 x RS-232/422/485 (DB-9 male), software configurable
DIO 4 x 3.3V GPIO
SIM Slot 1 x mini-SIM (2FF) slot
DC-in 2-pin terminal block
Button 1 x Power button (reset function button)
LCD Display
Size/Type 5“ TFT LCD
Resolution 960(W) x 540(H)
Brightness 350 cd/m²
Touch Screen
Type 5-point projected capacitive touch (PCT)
20. - 6 -
Introduction
Power Input
DC Input
2-pin terminal block
12V~24V Auto-Detection
Mechanical & Environmental
Ingress Protection Front bezel IP65
Operating Temp. -10°C ~ 50°C (14°F ~ 122°F )
Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)
Operating Humidity 5% ~ 90% RH
Dimensions
(W x H x D)
149.3 x 110 x 36.8 mm (5.88” x 4.33” x 1.45”)
Weight Under 350g (0.77 lb)
Installation
VESA Mount 50mm x 50mm
22. - 8 -
Installation and Configuration
2.1 SIM Card Installation
To install a SIM card to the device, locate the SIM card slot on the side and
insert the card following the direction as shown below. Push the SIM card into
the card slot until it locks into place.
To remvoe the SIM card, just push the SIM card in to eject it from its slot.
2.2 Power Connection
The device requires a 12~24V DC power supply. A 2-pin terminal block
receptacle is located on the left side of the device for DC power connection.
To connect the device to a power source, connect the 2-pin terminal block plug
of the power adapter to the 2-pin terminal block receptacle on the device. Then
connect the adapter to a power soucre.
The device will be automatically turned on upon power-on .
23. - 9 -
Installation and Configuration
2.3 Mounting the Device
The device is VESA 50-compliant and can be mounted on a VESA
50-compliant mounting kit using M3 screws.
50 mm
50mm
2.4 Connector Pintouts
2.4.1 PWPIN
Description: Power Input Connector
12
Connector Type: 2-pin Terminal Block
Pin Description
1 Power_GND
2 +12V-
2.4.2 GPIO and CAN Bus
Description: Digital General Purpose Signal Input/
Output and CAN
101Connector Type: 4x 3.3V Digitial GPIO connector
and 1 x CAN 2.0b Bus
Pin Description Pin Description
1 IO_GND 6 GPIO_4
2 GPIO_1 7 IO_GND
3 GPIO_2 8 CANL
4 IO_GND 9 CANH
5 GPIO_3 10 IO_GND
Note: The pin assignments of other connectors conform to the industry standard.
25. - 11 -
Using the Device
3Chapter 3
Using the Device
Chapter 3 Using the Device
26. - 12 -
Using the Device
3.1 Power On/Off the Device
Once the device is connected to a power supply, it will be turned on
automatically. Then the device will enter the Android system directly.
To power off the device. press and holde the Power button on the bottom of the
device. When prompted, tab OK to shut down the device.
3.2 Home Screen
The Home screen provides you with an instant access to device status,
notifications, application shortcuts, folders and widgets. Simply tap an item and
you can launch the associated application. You can also add desired items to
the Home screen, extend the Home screen or personalize the wallpaper to
tailor it to your personal needs.
When you power on the device for the first time, a typical Home screen looks
like the example below.
Status BarApp Launcher
App Dock
App Shortcut
Back button
Current Running
App button
Home button
The table below describes the elements on a typical Home screen:
Element Descriptions
Home Screen
• Tap an item on this screen to launch that item.
• To delete an icon or widget, tap and hold that item until the
Remove bar appears on the top of the screen. Then move the
icon to the Remove bar.
• Tap and hold any empty spot on this screen to customize your
home screen.
27. - 13 -
Using the Device
Notification Area
The Notification Area is visible across the Home screens.
The icons on the left side inform you of new messages, events,
alarms, and activities in progress, while the icons on the right
side shows the time, signal strength, and other information.
Applications you install on your device may show their own icons
in this area.
You can access the notification panel to see more information by
swiping down the Notification Area.
Widget
The miniature of an application that functions directly on the
Home screen.
App Launcher
Tap it to open the "App Launcher" where all applications
installed on the device can be viewed and launched.
Bottom Dock
The dock is visible across the home screens. It shows the most
commonly used App icons for quick access. You can change the
icons as needed.
Back Button Tap to go to the previous screen.
Home Button Tap to return to Home scree.
Current Running
App Button
Tap to view show your current running Apps and touch an App to
open it. To remove an App from the list, swipe it left or right.
3.3 Configurations
To configure the settings of Ethernet, Wi-Fi, Bluetooth or other features, tap
the Setting icon on the Home screen to open the Settings page and change
relevant settings for your device if necessary.