Data communication and transmission techniques
•Download as DOCX, PDF•
1 like•698 views
The document outlines topics related to networking including data communication techniques, routing protocols, switching concepts, VLANs, trunking, spanning tree protocol, etherchannel, first hop redundancy, QoS, network security, and network services. Key areas covered are the OSI and TCP/IP models, IP addressing, subnetting, routing protocols like RIP and EIGRP, VLAN configuration, trunking protocols, spanning tree protocol variants, etherchannel configuration, HSRP, DHCP snooping, SNMP, and system management protocols.
Report
Share
Report
Share
Recommended
MPLS SDN 2014 - Topology independant LFA
Slides used for a presentation at MPLS SDN congress in March 2014. This describes advantages and applicability of Topology independent LFA.
Protocolo Spanning Tree
Spanning Tree Protocol (STP) is used to prevent loops from forming on redundant networks. STP uses different port states and timers to logically prevent loops by electing a root bridge and designating root ports on each switch. Rapid PVST+ is an enhancement of STP that provides faster convergence time of less than 6 seconds compared to 50 seconds for STP, while also supporting VLANs to prevent loops between redundant switches in a VLAN.
ppt
The document proposes using UDP Lite as an alternative to UDP for wireless video streaming to provide better error resilience. UDP Lite allows corrupted data to be transmitted to applications by replacing the UDP header length field with a coverage field specifying how many bytes to checksum. The document tests UDP Lite over a wireless channel simulator and finds it provides less delay, jitter and packet loss than UDP, making it better suited for real-time video streaming over noisy wireless channels.
TCP and Mobile Networks Turbulent Relationship
This document discusses TCP and its turbulent relationship with mobile networks. It provides an overview of TCP including that it is connection-oriented, reliable, uses cumulative ACKs, delivers packets in-order, is full-duplex, and uses a sliding window. The document then discusses issues TCP has over mobile networks, including that the congestion window remains small due to disconnections and high bit error rates. It proposes collecting data from mobile operators anonymously to send to the IETF to develop new, more mobile-friendly protocols.
Cisco -Ccie rs quick_review_kit
This document provides an overview and summary of Frame Relay and PPP technologies:
- Frame Relay uses DLCI to identify virtual circuits and supports point-to-point, multipoint, and hub-and-spoke topologies. It uses LMI, inverse ARP, and static mappings for L2-L3 address resolution.
- PPP can be used over Frame Relay virtual circuits to provide routing between sites. A virtual-template interface is used to represent each PPP session.
- Authentication for PPP connections can be provided by PAP or CHAP protocols. CHAP provides one-way authentication via a three-way handshake by default.
Precision Timing Protocol NAB2010
The document discusses technologies for improving jitter for broadcaster content delivery over broadband networks. It summarizes that IEEE 1588 Grandmaster and Slave Clock and RTP are still solutions for multicast video transport. It also discusses Precision Timing Protocol versus Synchronized Ethernet and developments in their adoption. Recent test results showed that HD video in MPEG-4 at 8-10 Mbps performs similarly to MPEG-2, and at 18 Mbps is comparable to SD in MPEG-2. Future work on incorporating carrier grade synchronization into IP is suspended.
Can network development using arm cortex m3
The document provides an overview of Controller Area Network (CAN) network development. It discusses CAN protocol fundamentals including layers, frames, error handling, and physical implementation. It also outlines hands-on exercises for CAN programming on Cortex-M3 boards, sending data over CAN networks, and analyzing CAN traffic using tools like CANalyzer and BUSMASTER.
Introduction to MPLS - NANOG 61
MPLS (Multi-Protocol Label Switching) is introduced as a "Layer 2.5" protocol that sits between traditional Layer 2 and Layer 3 networking. It works by assigning labels to packets at ingress routers and using those labels for fast forwarding decisions without additional routing lookups at subsequent routers. This improves performance over traditional IP routing. MPLS also enables traffic engineering through protocols like RSVP-TE that allow reserving bandwidth on specific paths. Other key MPLS concepts covered are label switching, MPLS signaling protocols, label stacking, pseudowires, VPN services, and fast reroute for improved convergence during failures.
Recommended
MPLS SDN 2014 - Topology independant LFA
Slides used for a presentation at MPLS SDN congress in March 2014. This describes advantages and applicability of Topology independent LFA.
Protocolo Spanning Tree
Spanning Tree Protocol (STP) is used to prevent loops from forming on redundant networks. STP uses different port states and timers to logically prevent loops by electing a root bridge and designating root ports on each switch. Rapid PVST+ is an enhancement of STP that provides faster convergence time of less than 6 seconds compared to 50 seconds for STP, while also supporting VLANs to prevent loops between redundant switches in a VLAN.
ppt
The document proposes using UDP Lite as an alternative to UDP for wireless video streaming to provide better error resilience. UDP Lite allows corrupted data to be transmitted to applications by replacing the UDP header length field with a coverage field specifying how many bytes to checksum. The document tests UDP Lite over a wireless channel simulator and finds it provides less delay, jitter and packet loss than UDP, making it better suited for real-time video streaming over noisy wireless channels.
TCP and Mobile Networks Turbulent Relationship
This document discusses TCP and its turbulent relationship with mobile networks. It provides an overview of TCP including that it is connection-oriented, reliable, uses cumulative ACKs, delivers packets in-order, is full-duplex, and uses a sliding window. The document then discusses issues TCP has over mobile networks, including that the congestion window remains small due to disconnections and high bit error rates. It proposes collecting data from mobile operators anonymously to send to the IETF to develop new, more mobile-friendly protocols.
Cisco -Ccie rs quick_review_kit
This document provides an overview and summary of Frame Relay and PPP technologies:
- Frame Relay uses DLCI to identify virtual circuits and supports point-to-point, multipoint, and hub-and-spoke topologies. It uses LMI, inverse ARP, and static mappings for L2-L3 address resolution.
- PPP can be used over Frame Relay virtual circuits to provide routing between sites. A virtual-template interface is used to represent each PPP session.
- Authentication for PPP connections can be provided by PAP or CHAP protocols. CHAP provides one-way authentication via a three-way handshake by default.
Precision Timing Protocol NAB2010
The document discusses technologies for improving jitter for broadcaster content delivery over broadband networks. It summarizes that IEEE 1588 Grandmaster and Slave Clock and RTP are still solutions for multicast video transport. It also discusses Precision Timing Protocol versus Synchronized Ethernet and developments in their adoption. Recent test results showed that HD video in MPEG-4 at 8-10 Mbps performs similarly to MPEG-2, and at 18 Mbps is comparable to SD in MPEG-2. Future work on incorporating carrier grade synchronization into IP is suspended.
Can network development using arm cortex m3
The document provides an overview of Controller Area Network (CAN) network development. It discusses CAN protocol fundamentals including layers, frames, error handling, and physical implementation. It also outlines hands-on exercises for CAN programming on Cortex-M3 boards, sending data over CAN networks, and analyzing CAN traffic using tools like CANalyzer and BUSMASTER.
Introduction to MPLS - NANOG 61
MPLS (Multi-Protocol Label Switching) is introduced as a "Layer 2.5" protocol that sits between traditional Layer 2 and Layer 3 networking. It works by assigning labels to packets at ingress routers and using those labels for fast forwarding decisions without additional routing lookups at subsequent routers. This improves performance over traditional IP routing. MPLS also enables traffic engineering through protocols like RSVP-TE that allow reserving bandwidth on specific paths. Other key MPLS concepts covered are label switching, MPLS signaling protocols, label stacking, pseudowires, VPN services, and fast reroute for improved convergence during failures.
Tcp and udp.transmission control protocol.user datagram protocol
This document compares TCP and UDP protocols. TCP provides reliable, ordered, and error-checked delivery of streams of data between applications running on hosts communicating over an IP network. It is used for applications like HTTP, FTP, and SMTP that require reliable data transmission. UDP is a simpler protocol that transmits datagrams without acknowledgments or guaranteed delivery, making it faster than TCP. It is used for applications like DNS, DHCP, streaming media, and online games where packet loss is acceptable. The document discusses the advantages and disadvantages of each protocol and why they are used for certain applications.
STP (spanning tree protocol)
It prevents a network from frame looping by putting some interfaces in forwarding state & some
interfaces in blocking state.
Whenever two or more switches are connected with each other for redundancy purpose loop can occur.
STP Protocol is used to prevent the loop. STP is layer 2 Protocol & by default it is enabled on switches.
Ieee 1588 ptp
IEEE Standard 1588 defines the Precision Time Protocol (PTP) to synchronize clocks over packet networks. PTP is needed for applications that require precise timing such as Time Division Multiplexing (TDM) over IP. PTP uses network messages and timestamps to synchronize slave clocks to a master clock with nanosecond precision. PTP messages include sync, delay request, follow up, and delay response. Hardware time stamping is often required to achieve high precision with low delay and jitter. PTP is a cheaper and more scalable solution than alternatives like GPS or atomic clocks for synchronizing networks to within 50 parts per billion.
Analysis of attacks / vulnerabilities SS7 / Sigtran using Wireshark (and / or...
Analysis of attacks / vulnerabilities SS7 / Sigtran using Wireshark (and / or...Alejandro Corletti Estrada
This is a study that presents a methodology to deal with this serious signaling problem worldwide and that will necessarily be extended for at least the next ten years.
We could say that on dates close to 2010, it has begun to be heard that this signaling system Number 7 (SS7) (true heart of the entire world voice network and certain types of data) presents serious security problems. The exploitation of them opens a range to all types of attacks that are currently being executed in several telephone operators, stealing money from bank accounts, intercepting phone calls, locating the position of mobile phones, performing different types of fraud in voice and navigation, executing service denials, etc.
It is worth mentioning that the "traffic analysis" is the ONLY methodology we have to understand and evaluate this type of anomalies in our signaling flows, for this reason, the work is based on the Open Source tools: "Wireshark" and "Snort".
This article of almost seventy pages, is part of the security work that Alejandro Corletti Estrada has been carrying out and disseminating for more than twenty years.TCP over 6LoWPAN for Industrial Applications
This document discusses using TCP over 6LoWPAN for industrial applications. It outlines the benefits of TCP for reliable communication in wireless sensor networks and describes an experimental setup using TelosB motes running Contiki OS to evaluate TCP performance over 6LoWPAN in both single-hop and multi-hop scenarios. Key energy parameters like voltage, current draw for different radio states, and CPU usage are also presented to analyze energy consumption.
MPLS SDN 2015 - SPRING interoperability testing
This is a presentation done at MPLS SDN congress in March 2015 about Segment Routing interoperability testings
Spanning Tree Protocol (STP)
Spanning Tree Protocol (STP) prevents Layer 2 switching loops and broadcast storms in a local area network by allowing redundant links without the risk of loops. STP was developed by Radia Perlman at DEC and standardized as IEEE 802.1D. A newer version known as Rapid Spanning Tree Protocol (RSTP) has faster convergence time than the original STP.
Sigtran Workshop
The document provides an agenda and overview of Ulticom's Signalware SIGTRAN software as it relates to Vodafone Italy's NP project. It discusses SIGTRAN and its components SCTP and M3UA, and how Signalware implements these protocols. It describes Signalware's architecture, and how M3UA is used between the application server and signaling gateway. It also covers installation, configuration, operation and monitoring of Signalware M3UA.
MPLS SDN 2016 - Microloop avoidance with segment routing
The document discusses micro-loops in networks and how segment routing can be used to avoid them. Micro-loops are a natural phenomenon in hop-by-hop routed networks caused by transient disagreements between routers during convergence. Segment routing allows building a temporary loop-free path using a two-stage convergence - first using a precomputed loop-free label stack, then switching to the standard path once convergence is complete. This approach could help address issues caused by micro-loops like broken fast reroute and traffic loss.
Overview of Spanning Tree Protocol (STP & RSTP)
This document provides an overview of Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), which are protocols used to create a loop-free topology in Ethernet networks. It describes the goal of preventing broadcast storms by eliminating loops. Key aspects of STP covered include the root bridge, port roles (root port, designated port, non-designated port), BPDUs, path costs, and how STP establishes a loop-free topology for bridged network segments. The document also provides standards information for various STP implementations.
MPLS WC 2014 Segment Routing TI-LFA Fast ReRoute
This document discusses Topology Independent LFA (TI-LFA), a fast reroute technique that provides 100% node and link protection using Segment Routing. It begins by outlining requirements for fast reroute, then introduces TI-LFA which computes the post-convergence path and encodes it as a loop-free Segment Routing path. The document analyzes applicability on Orange network topologies and presents simulation results showing TI-LFA achieves low stack depth and path compression. It concludes that TI-LFA is a scalable solution that meets requirements by providing optimal fast reroute paths without side effects.
Stp premdeep gill-lu045310-14aug12
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
https://cyberintelligentsnews.wordpress.com/
IEEE 1588 Timing for Mobile Backhaul_Webinar
IEEE 1588 Timing for Mobile Backhaul webinar sponsored by Cisco. By 2015 there will be 5 billion mobile devices and 1.5 billion M2M nodes. Global mobile traffic will grow 26 times to 6.3 exabytes per month. Video will make up 66% of mobile traffic. Ethernet backhaul costs less per bit than TDM and has a flat cost structure. Mobile networks are transforming from linear TDM architectures to distributed IP/Ethernet architectures to scale with demand. Migration to Ethernet requires time synchronization which can be achieved using 1588v2 and SyncE technologies. 1588v2 supports both frequency and phase synchronization required for 4G/LTE networks.
6.) switch quick config (fixed summits)
An experience is a personal and emotional event we remember. Every experience is established based upon pre-determined expectations we conceive and create in our minds. It’s personal, and therefore, remains a moving and evolving target in every scenario. When our experience concludes and the moment has passed, the outcome remains in our memory. Think about what makes you happy when connecting with your own device and then think about what makes you really upset when things are hard, complicated, and slow. If the user has a bad experience in anyone of these areas (simple, fast, and smart), they are likely to leave, share their negative experience, and potentially never return. Users might forget facts or details about their computing environment but they find it difficult to forgot the feeling behind a bad network experience. When something goes wrong with the network or an application, do you always get the blame?
huawei-s5700-28p-li-bat-brochure-datasheet.pdf
The document provides a datasheet for the Huawei S5700-28P-LI-BAT gigabit enterprise switch. It includes specifications for the switch such as 24 10/100/1000BASE-T Ethernet ports and 4 1000BASE-X SFP ports, a switching capacity of 256 Gbit/s, and a maximum power consumption of 23W. The datasheet also provides details on the switch's features, modules, comparison to similar switches, and specifications. It encourages contacting the company for any other questions about the S5700-28P-LI-BAT.
5 продвинутых технологий Cisco, которые нужно знать
Руслан Савченко, инструктор онлайн-школы SkillFactory – о самом интересном из программы курсов CCNP Route и CCNP Switch от Cisco и о том, какие знания в области маршрутизации и коммутации нужно иметь, чтобы решать по-настоящему сложные задачи.
huawei-s3700-28tp-ei-dc-brochure-datasheet.pdf
The document provides information about the Huawei S3700-28TP-EI-DC network switch, including its specifications, features, ports, power supply, dimensions, and price and purchase information. Specifically, it is a next-generation layer 3 Ethernet switch that supports IP multicasting and routing protocols. It has 24 10/100 Ethernet ports, 2 1000BASE-X SFP ports, and 2 combo ports. Additional features include 16K MAC addresses, 4K VLANs, 9.6Mpps switching capacity, and routing protocols like OSPF, IS-IS, BGP and more. The document provides contact information to purchase the switch from www.hi-network.com.
American Fibertek SM10P Data Sheet
Buy the American Fibertek SM10P at JMAC Supply.
https://www.jmac.com/product_p/american-fibertek-sm10p.htm?=slideshare
huawei-ls-s5328c-ei-brochure-datasheet.pdf
This document provides specifications for the Huawei S5300 Series Switch S5328C-EI Mainframe. It includes 24 10/100/1000 Gigabit Ethernet RJ-45 ports and supports additional cards. Key features include basic layer 3 routing, VLAN, QoS, security, and management. It has dimensions of 442mm x 420mm x 43.6mm and a typical power consumption of under 63W. For purchase or additional information, contact HI-NETWORK.COM.
huawei-ls-s5328c-si-brochure-datasheet.pdf
This document provides specifications for the LS-S5328C-SI network switch, including its key features, ports, dimensions, power usage and environmental tolerances. It has 24 10/100/1000Base-T ports, 4 100/1000 SFP combo ports, and supports additional subcards. The switch has basic layer 3 routing, VLAN, QoS, security and reliability features. It measures 442x420x43.6 mm and has a power consumption of less than 56W.
17.) layer 3 (advanced tcp ip routing)
If the number of spine switches were to be merely doubled, the effect of a single switch failure is halved. With 8 spine switches, the effect of a single switch failure only causes a 12% reduction in available bandwidth. So, in modern data centers, people build networks with anywhere from 4 to 32 spine switches. With a leaf-spine network, every server on the network is exactly the same distance away from all other servers – three port hops, to be precise. The benefit of this architecture is that you can just add more spines and leaves as you expand the cluster and you don't have to do any recabling. Intuition Systems will also get more predictable latency between the nodes.
As a trend, disaggregation seems to be most useful for very large companies like Facebook and Google, or cloud providers. The technology does not necessarily have significant implications for small or medium sized businesses. Historically, however, technology has a way of trickling down from the pioneering phases of existing only within large companies with tremendous resources, to becoming more standardized across the board.
Vista-1600C GEPON OLT
This document provides specifications for the VISTA-1600C, a 1RU rack mountable network device that supports up to 10 PON ports. It has 4 1000Base-T Ethernet ports, 4 SFP ports, 2 HDMI ports, and supports non-blocking full speed data exchange up to 68Gbps. It provides layer 2 and layer 3 networking functions including VLAN, QoS, ACLs, IGMP snooping, and ONU/ONI management. Environmental specifications include an operating temperature range of 0-50°C and 10-90% humidity.
More Related Content
What's hot
Tcp and udp.transmission control protocol.user datagram protocol
This document compares TCP and UDP protocols. TCP provides reliable, ordered, and error-checked delivery of streams of data between applications running on hosts communicating over an IP network. It is used for applications like HTTP, FTP, and SMTP that require reliable data transmission. UDP is a simpler protocol that transmits datagrams without acknowledgments or guaranteed delivery, making it faster than TCP. It is used for applications like DNS, DHCP, streaming media, and online games where packet loss is acceptable. The document discusses the advantages and disadvantages of each protocol and why they are used for certain applications.
STP (spanning tree protocol)
It prevents a network from frame looping by putting some interfaces in forwarding state & some
interfaces in blocking state.
Whenever two or more switches are connected with each other for redundancy purpose loop can occur.
STP Protocol is used to prevent the loop. STP is layer 2 Protocol & by default it is enabled on switches.
Ieee 1588 ptp
IEEE Standard 1588 defines the Precision Time Protocol (PTP) to synchronize clocks over packet networks. PTP is needed for applications that require precise timing such as Time Division Multiplexing (TDM) over IP. PTP uses network messages and timestamps to synchronize slave clocks to a master clock with nanosecond precision. PTP messages include sync, delay request, follow up, and delay response. Hardware time stamping is often required to achieve high precision with low delay and jitter. PTP is a cheaper and more scalable solution than alternatives like GPS or atomic clocks for synchronizing networks to within 50 parts per billion.
Analysis of attacks / vulnerabilities SS7 / Sigtran using Wireshark (and / or...
Analysis of attacks / vulnerabilities SS7 / Sigtran using Wireshark (and / or...Alejandro Corletti Estrada
This is a study that presents a methodology to deal with this serious signaling problem worldwide and that will necessarily be extended for at least the next ten years.
We could say that on dates close to 2010, it has begun to be heard that this signaling system Number 7 (SS7) (true heart of the entire world voice network and certain types of data) presents serious security problems. The exploitation of them opens a range to all types of attacks that are currently being executed in several telephone operators, stealing money from bank accounts, intercepting phone calls, locating the position of mobile phones, performing different types of fraud in voice and navigation, executing service denials, etc.
It is worth mentioning that the "traffic analysis" is the ONLY methodology we have to understand and evaluate this type of anomalies in our signaling flows, for this reason, the work is based on the Open Source tools: "Wireshark" and "Snort".
This article of almost seventy pages, is part of the security work that Alejandro Corletti Estrada has been carrying out and disseminating for more than twenty years.TCP over 6LoWPAN for Industrial Applications
This document discusses using TCP over 6LoWPAN for industrial applications. It outlines the benefits of TCP for reliable communication in wireless sensor networks and describes an experimental setup using TelosB motes running Contiki OS to evaluate TCP performance over 6LoWPAN in both single-hop and multi-hop scenarios. Key energy parameters like voltage, current draw for different radio states, and CPU usage are also presented to analyze energy consumption.
MPLS SDN 2015 - SPRING interoperability testing
This is a presentation done at MPLS SDN congress in March 2015 about Segment Routing interoperability testings
Spanning Tree Protocol (STP)
Spanning Tree Protocol (STP) prevents Layer 2 switching loops and broadcast storms in a local area network by allowing redundant links without the risk of loops. STP was developed by Radia Perlman at DEC and standardized as IEEE 802.1D. A newer version known as Rapid Spanning Tree Protocol (RSTP) has faster convergence time than the original STP.
Sigtran Workshop
The document provides an agenda and overview of Ulticom's Signalware SIGTRAN software as it relates to Vodafone Italy's NP project. It discusses SIGTRAN and its components SCTP and M3UA, and how Signalware implements these protocols. It describes Signalware's architecture, and how M3UA is used between the application server and signaling gateway. It also covers installation, configuration, operation and monitoring of Signalware M3UA.
MPLS SDN 2016 - Microloop avoidance with segment routing
The document discusses micro-loops in networks and how segment routing can be used to avoid them. Micro-loops are a natural phenomenon in hop-by-hop routed networks caused by transient disagreements between routers during convergence. Segment routing allows building a temporary loop-free path using a two-stage convergence - first using a precomputed loop-free label stack, then switching to the standard path once convergence is complete. This approach could help address issues caused by micro-loops like broken fast reroute and traffic loss.
Overview of Spanning Tree Protocol (STP & RSTP)
This document provides an overview of Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), which are protocols used to create a loop-free topology in Ethernet networks. It describes the goal of preventing broadcast storms by eliminating loops. Key aspects of STP covered include the root bridge, port roles (root port, designated port, non-designated port), BPDUs, path costs, and how STP establishes a loop-free topology for bridged network segments. The document also provides standards information for various STP implementations.
MPLS WC 2014 Segment Routing TI-LFA Fast ReRoute
This document discusses Topology Independent LFA (TI-LFA), a fast reroute technique that provides 100% node and link protection using Segment Routing. It begins by outlining requirements for fast reroute, then introduces TI-LFA which computes the post-convergence path and encodes it as a loop-free Segment Routing path. The document analyzes applicability on Orange network topologies and presents simulation results showing TI-LFA achieves low stack depth and path compression. It concludes that TI-LFA is a scalable solution that meets requirements by providing optimal fast reroute paths without side effects.
Stp premdeep gill-lu045310-14aug12
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
https://cyberintelligentsnews.wordpress.com/
IEEE 1588 Timing for Mobile Backhaul_Webinar
IEEE 1588 Timing for Mobile Backhaul webinar sponsored by Cisco. By 2015 there will be 5 billion mobile devices and 1.5 billion M2M nodes. Global mobile traffic will grow 26 times to 6.3 exabytes per month. Video will make up 66% of mobile traffic. Ethernet backhaul costs less per bit than TDM and has a flat cost structure. Mobile networks are transforming from linear TDM architectures to distributed IP/Ethernet architectures to scale with demand. Migration to Ethernet requires time synchronization which can be achieved using 1588v2 and SyncE technologies. 1588v2 supports both frequency and phase synchronization required for 4G/LTE networks.
What's hot (13)
Tcp and udp.transmission control protocol.user datagram protocol
Tcp and udp.transmission control protocol.user datagram protocol
Analysis of attacks / vulnerabilities SS7 / Sigtran using Wireshark (and / or...
Analysis of attacks / vulnerabilities SS7 / Sigtran using Wireshark (and / or...
MPLS SDN 2016 - Microloop avoidance with segment routing
MPLS SDN 2016 - Microloop avoidance with segment routing
Similar to Data communication and transmission techniques
6.) switch quick config (fixed summits)
An experience is a personal and emotional event we remember. Every experience is established based upon pre-determined expectations we conceive and create in our minds. It’s personal, and therefore, remains a moving and evolving target in every scenario. When our experience concludes and the moment has passed, the outcome remains in our memory. Think about what makes you happy when connecting with your own device and then think about what makes you really upset when things are hard, complicated, and slow. If the user has a bad experience in anyone of these areas (simple, fast, and smart), they are likely to leave, share their negative experience, and potentially never return. Users might forget facts or details about their computing environment but they find it difficult to forgot the feeling behind a bad network experience. When something goes wrong with the network or an application, do you always get the blame?
huawei-s5700-28p-li-bat-brochure-datasheet.pdf
The document provides a datasheet for the Huawei S5700-28P-LI-BAT gigabit enterprise switch. It includes specifications for the switch such as 24 10/100/1000BASE-T Ethernet ports and 4 1000BASE-X SFP ports, a switching capacity of 256 Gbit/s, and a maximum power consumption of 23W. The datasheet also provides details on the switch's features, modules, comparison to similar switches, and specifications. It encourages contacting the company for any other questions about the S5700-28P-LI-BAT.
5 продвинутых технологий Cisco, которые нужно знать
Руслан Савченко, инструктор онлайн-школы SkillFactory – о самом интересном из программы курсов CCNP Route и CCNP Switch от Cisco и о том, какие знания в области маршрутизации и коммутации нужно иметь, чтобы решать по-настоящему сложные задачи.
huawei-s3700-28tp-ei-dc-brochure-datasheet.pdf
The document provides information about the Huawei S3700-28TP-EI-DC network switch, including its specifications, features, ports, power supply, dimensions, and price and purchase information. Specifically, it is a next-generation layer 3 Ethernet switch that supports IP multicasting and routing protocols. It has 24 10/100 Ethernet ports, 2 1000BASE-X SFP ports, and 2 combo ports. Additional features include 16K MAC addresses, 4K VLANs, 9.6Mpps switching capacity, and routing protocols like OSPF, IS-IS, BGP and more. The document provides contact information to purchase the switch from www.hi-network.com.
American Fibertek SM10P Data Sheet
Buy the American Fibertek SM10P at JMAC Supply.
https://www.jmac.com/product_p/american-fibertek-sm10p.htm?=slideshare
huawei-ls-s5328c-ei-brochure-datasheet.pdf
This document provides specifications for the Huawei S5300 Series Switch S5328C-EI Mainframe. It includes 24 10/100/1000 Gigabit Ethernet RJ-45 ports and supports additional cards. Key features include basic layer 3 routing, VLAN, QoS, security, and management. It has dimensions of 442mm x 420mm x 43.6mm and a typical power consumption of under 63W. For purchase or additional information, contact HI-NETWORK.COM.
huawei-ls-s5328c-si-brochure-datasheet.pdf
This document provides specifications for the LS-S5328C-SI network switch, including its key features, ports, dimensions, power usage and environmental tolerances. It has 24 10/100/1000Base-T ports, 4 100/1000 SFP combo ports, and supports additional subcards. The switch has basic layer 3 routing, VLAN, QoS, security and reliability features. It measures 442x420x43.6 mm and has a power consumption of less than 56W.
17.) layer 3 (advanced tcp ip routing)
If the number of spine switches were to be merely doubled, the effect of a single switch failure is halved. With 8 spine switches, the effect of a single switch failure only causes a 12% reduction in available bandwidth. So, in modern data centers, people build networks with anywhere from 4 to 32 spine switches. With a leaf-spine network, every server on the network is exactly the same distance away from all other servers – three port hops, to be precise. The benefit of this architecture is that you can just add more spines and leaves as you expand the cluster and you don't have to do any recabling. Intuition Systems will also get more predictable latency between the nodes.
As a trend, disaggregation seems to be most useful for very large companies like Facebook and Google, or cloud providers. The technology does not necessarily have significant implications for small or medium sized businesses. Historically, however, technology has a way of trickling down from the pioneering phases of existing only within large companies with tremendous resources, to becoming more standardized across the board.
Vista-1600C GEPON OLT
This document provides specifications for the VISTA-1600C, a 1RU rack mountable network device that supports up to 10 PON ports. It has 4 1000Base-T Ethernet ports, 4 SFP ports, 2 HDMI ports, and supports non-blocking full speed data exchange up to 68Gbps. It provides layer 2 and layer 3 networking functions including VLAN, QoS, ACLs, IGMP snooping, and ONU/ONI management. Environmental specifications include an operating temperature range of 0-50°C and 10-90% humidity.
huawei-ls-s3352p-ei-24s-ac-brochure-datasheet.pdf
This document provides specifications for the Huawei S3352P-EI-24S-AC network switch. It has 24 10/100BASE-T ports, 24 100BASE-FX ports, 2 100/1000BASE-X ports, and 2 1000BASE-X ports. It supports up to 13.2 million packets per second forwarding and 17.6 Gbps switching capacity. The switch also supports features such as VLANs, IPv4/IPv6 routing, QoS, ACLs, and security functions. It has dimensions of 442 x 420 x 43.6 mm and power consumption of less than 66W when operating between 0-50 degrees Celsius.
Lecture24
The document discusses physical layer data transmission and signals. It covers topics like analog vs digital signals, periodic vs non-periodic signals, properties of signals like amplitude, frequency, period, phase, and bandwidth. It also discusses signal representation and analysis in the time and frequency domains, including Fourier analysis which shows how composite signals can be decomposed into simpler sine waves.
CCNA Interview questions - Networking
This document lists 100 interview questions for a CCNA certification covering topics like the OSI model, IP addressing, switching, routing protocols like OSPF and EIGRP, WAN technologies, network security concepts, and basic Cisco device configuration and troubleshooting. The questions assess knowledge of networking fundamentals including Ethernet, TCP/IP, VLANs, STP, routing, NAT, ACLs, firewalls, VPNs, and more.
2016 06-10-ieee-sdn (1)
This document discusses managing multi-layer networks and the challenges of closing the control loop in autonomic networks. It proposes using the Recursive InterNetwork Architecture (RINA) model, which provides a common structure and set of protocols across layers to simplify network management. RINA could reduce costs and downtime compared to the Internet Protocol (IP) model with its many isolated protocols for each layer. The document provides examples of how data center networks and service provider networks could be modeled and managed using RINA.
6lowpan
6LoWPAN allows the use of IPv6 over low-power wireless networks. It compresses IPv6 packet headers to accommodate the small packet sizes of low-power wireless standards like 802.15.4. 6LoWPAN finds applications in home automation, healthcare, industrial automation, and environmental monitoring. It defines adaptations for addressing, forwarding, routing, header compression, and security to enable IPv6 connectivity over low-power wireless networks. Implementations of 6LoWPAN exist in open-source operating systems like Contiki and TinyOS, as well as commercial solutions.
huawei-s5710-108c-pwr-hi-brochure-datasheet.pdf
The S5710-108C-PWR-HI is an Ethernet switch that provides 48 GE ports, 8 10GE SFP+ ports, and modular card slots. It has a large switching capacity of 1024 Gbit/s and can power devices via PoE. The switch is suitable for access, aggregation, or data center applications. It offers features such as high reliability, security, QoS, and IPv6 support. The document provides specifications, components, and purchasing information for the S5710-108C-PWR-HI Ethernet switch.
huawei-ls-s3352p-pwr-ei-brochure-datasheet.pdf
The document provides specifications for the Huawei S3352P-PWR-EI network switch. It has 48 10/100BASE-T ports, 2 100/1000BASE-X ports, and 2 SFP GE ports. Key specifications include a switching capacity of 17.6 Gbps, forwarding performance of 13.2 Mpps, 128MB of DDR memory, and a stacking bandwidth of 64Gbps. It also lists detailed features regarding VLAN, QoS, security, management, and environmental specifications. The switch is available for purchase from www.hi-network.com.
CCNA Training in Bangalore | Best Networking course in Bangalore
At TIB Academy, you will get the best CCNA training in Bangalore. To clear Cisco CCNA Certification, you need to be very good in basic networking concepts like network topology and network layers. So, enroll in our Networking Course immediately to get the best CCNA training and certification assistance
S5850 datasheet
The Fiberstore FS S5850 Series Routing Switches are high performance Ethernet switches to meet next generation Metro, Data Center and Enterprise network requirements.
S5850 datasheet
The FS S5850 Series are cost-effective Ethernet access and aggregation platform to Enterprise, Data Center and Metro application. The FS S5850 Series Switches currently includes four configurations: S5850-48S2Q4C/S5850-48S6Q/FS S5850 and S5850-32S2Q.
S5850 3-datasheet
The Fiberstore FS S5850 Series Routing Switches are high performance Ethernet switches to meet next generation Metro, Data Center and Enterprise network requirements. FS S5850 is designed based on the fourth generation high-end scalable chipset , which support L2/L3/Data Center/Metro features. The FS S5850 comes with complete system software with comprehensive protocols and applications to facilitate rapid service deployment and management for both traditional L2/L3 networks and Data Center networks.
Similar to Data communication and transmission techniques (20)
5 продвинутых технологий Cisco, которые нужно знать
5 продвинутых технологий Cisco, которые нужно знать
CCNA Training in Bangalore | Best Networking course in Bangalore
CCNA Training in Bangalore | Best Networking course in Bangalore
More from Subhabrata Roy
October Means Opals
Opals are one of the most unique and beautiful gemstones in the world. They are known for their iridescent, rainbow-like colors and their ability to reflect light in a way that is truly mesmerizing. Opal earrings are the birthstone for the month of October, making them a popular choice for jewelry during this time of year.
12 months of precious stones.docx
Each month of the year is associated with a precious gemstone that represents different aspects of personality and life force. The document provides examples of the stones for January (garnet for business and love), February (amethyst for calmness), and March (aquamarine for relaxation and creativity). It describes the healing and emotional properties of other monthly stones like emerald, pearl, ruby, peridot, sapphire, opal and citrine. People look to these gemstones as sources of inspiration and incorporate them into jewelry to access their positive attributes.
Some information about fine jewelry for everyone.docx
It was Elizabeth Taylor who said diamonds are a girl's best friend. It is considered to be the best gemstone that a person can have in their adornments and is therefore used in wedding and engagement rings all over the world. They can be placed in necklaces, barrettes and bracelets. They are special fine opal gemstone given to the most special ladies.
Learn Bootstrap.docx
This document provides information about learning Bootstrap and introduces Coursenator. It explains that Bootstrap's grid system can be used to construct complex layouts and its utility classes and components allow for styling and populating a site. It then provides details about Coursenator, which is a search engine that aggregates and recommends online courses according to a learner's needs. The document concludes by listing Coursenator's social media and website addresses.
App Design and Development for iOS.docx
This document provides information about an iOS app design and development course. The course will teach students foundational programming skills to support graphical elements, data manipulation, core graphics, touch handling, animations, alerts and advanced algorithms. By completing the course, students will be able to develop a fully functioning iOS app using Swift 2. The course content is currently being updated to Swift 3.
Code Foundations.docx
This introductory coding path provides an overview of basic coding concepts and exposes learners to different areas like data science, computer science, and web development to help them determine the best fit. It also includes information about Coursenator, a search engine for online courses that aggregates highly rated courses and provides recommendations to learners according to their needs and interests.
Advanced Microsoft Excel.docx
This advanced Microsoft Excel course teaches sophisticated data manipulation techniques like nested functions and keyboard shortcuts for speed. Students will learn to professionally format sheets and charts as well as hidden Excel tips and tricks not found in textbooks to do more with Excel. The course is offered by Coursenator online and on social media platforms.
Design Databases With PostgreSQL.docx
PostgreSQL allows you to design a relational database that stores data in an elegant and easy to use manner, making it popular with data scientists and backend engineers. It is also the database standard used by AWS. The document provides links to the Coursenator website and social media profiles to stay updated on their content.
Opal is that Magical Stone you Just Can't help but Adore.docx
Black Opal is mined mainly in Australia and 10% of opal stones are mined in Brazil and Mexico. While pure opal stone is colorless, pure opal stone is almost impossible to find.
Birthstone Jewellery
Birthstones are associated with each month of the year. The document discusses the traditional birthstones from January to December, describing their gemological properties and where they are sourced from around the world. Some of the birthstones mentioned include garnet for January, amethyst for February, aquamarine for March, diamond for April, emerald for May, pearl for June, ruby for July, peridot for August, sapphire for September, opal for October, topaz for November, and turquoise for December. The document provides details on factors like each stone's color, hardness, locations where the finest quality gems are found, and tips for caring for some of the more delicate varieties.
Opal Jewelry
Opal is a delicate gemstone that can be damaged by scratches or hard impacts more easily than other stones like emerald. It must be handled carefully and protected from abrasives, extreme temperature changes, chemicals, and makeup in order to avoid damage. Opal forms through silica spheres sticking together over time, and its color comes from the different sizes of spheres reflecting different wavelengths of light. Proper care and avoidance of potentially damaging activities can help opals withstand adverse conditions without chipping or breaking.
Opal jewellery care
The opal gemstone is very aesthetic and at the same time delicate in nature. It can be damaged by a slight scratch or by hitting something hard. This somewhat fragile but so beautiful opal jewelry is unique among gemstones. I took rough material, cut a lot of opal and polished it. I can't count the number of opal stones set in jewellery. I love opals.Here are the main things to think about when wearing and storing opal jewellery. First of all, opal is not as strong as other stones but it is definitely as durable as the emerald you see. Opal is not as hard as emerald, but most emeralds chip easily and can be damaged by cleaning even due to internal defects! Properly covered, it will withstand a great deal of adverse conditions and will not chip or break.
The gemstone opal of october (2)
The month of October is full of many wonderful things. The fall is really starting to get in the swing. The end of the month brings with it countless holidays that celebrate the culturally unanimous time of the year when spirits may return to earth for positive or negative reasons - Halloween, Samhain, La Dia de los Muertos. This is a great month to associate with a birthday as the harvest festivals and outdoor gatherings end in a bit of clouds in an effort to enjoy the last bit warm and sunny weather andThe rapid demeanour in winter is related to the onset of winter and the end of winter and the cause is the birthstone of October. This month's uniqueness is reflected in its relationship with the opal's October birthstone as the mysterious gem comes in a variety of shades and colours that are also special in a milky but shiny glossy image.
An unseen beauty
The document describes the narrator's lifelong fascination with fluorescent minerals that glow brightly under ultraviolet light, though they appear dull and gray in normal light. As a child, they enjoyed collecting stones. Later, after seeing mineral displays at a museum, they studied geology in college. As an adult, the narrator purchased an ultraviolet spotlight and discovered a private collection of fluorescent minerals in New Jersey. The collector showed them samples that shone with vivid colors under the light. Inspired, the narrator used the spotlight to find more specimens near old mine tailings, discovering treasures that glowed like galaxies in the darkness.
Perfect opal ring
Opal gemstones are admired by all for their dazzling brilliance and play of color. Opal rings are famous throughout history for their amazing display of color and bright patterns.Not only that, but many cultures of the ancient world regarded them as the luxurious attractions of fortune and good news. Even to this day, opal rings are highly coveted for their unique beauty and elegance. This type of jewelry is suitable for gifts because each opal is natural, rare and unique. If you are looking for one, you are bound to be curious to find the perfect one for your needs, budget and taste.
The development of opal
Opal is a unique gemstone known for its delicate nature and varied color patterns that differ from stone to stone. Most opal jewelry comes from mines in Australia, where the first opal excavations began in the late 1800s. Opal forms as silicate spheres accumulate in sediment deposited in river beds, caves, and canals. These silicate spheres scatter light within the stone to create its colorful patterns. However, opal's high water content of 6-10% makes it very soft and fragile, ranking only a 6 on the Mohs hardness scale. Special care must be taken to prevent damage when wearing opal jewelry.
Perfect opal ring selecting
Finding the perfect opal ring requires considering several factors, including the quality of the opal stone, its pattern, color, shape, and clarity. A high quality opal ring will have a bold, bright pattern visible when light hits the stone. The dome shape of the opal provides more luster than a flat cut. Small particles can ruin the aesthetics if the clarity is poor. The perfect setting depends on offsetting the metal band against the opal color to draw attention to the stone. Discovering the perfect opal ring takes perseverance and knowledge in selecting a high quality stone.
Victorian jewelry
Victorian jewelry became popular during the reign of Queen Victoria from 1837 to 1901. The queen had a passion for jewelry design and often gifted pieces to friends and family. Common jewelry materials of the time included opals, cameos, lava from Mount Vesuvius, and affordable semi-precious stones like amethyst, coral, and turquoise. Jewelry designs frequently featured romantic, natural motifs like birds, flowers, and insects. Mourning jewelry made of black materials like jet also became popular after the death of Prince Albert in 1861.
Traditional myths surrounding opal
Traditional myths surrounding opal include beliefs that it is associated with evil forces and bad luck. Legends claim that opals were used by witches for black magic and that a Roman emperor's opal crown represented his evil eye seeking to invade lands. However, some counter-legends tried to convince people that opal brings the opposite of evil. In the late 19th century, Queen Victoria often wore opals, helping increase their popularity. While the superstition about opals has lessened, some remain wary of them due to the centuries-old debates about their virtues and associations with witchcraft.
Opal’s decadence
Opal is a suitable material for making various types of gemstones and jewelry due to its unique colors and patterns. Opal jewelry comes in many designs for people of all ages and genders to enjoy. While opal is a beautiful birthstone for October, it also makes a lovely gift for anyone due to its enchanting appearance in jewelry. However, opal is a fragile stone that can be scratched or cracked, so care must be taken when wearing opal jewelry.
More from Subhabrata Roy (20)
Some information about fine jewelry for everyone.docx
Some information about fine jewelry for everyone.docx
Opal is that Magical Stone you Just Can't help but Adore.docx
Opal is that Magical Stone you Just Can't help but Adore.docx
Recently uploaded
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambarBest practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Digital Marketing with a Focus on Sustainability
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
Profiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
TIMES BPO: Business Plan For Startup Industry
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentationsThe Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Leaders who possess self-awareness deeply understand their emotions, strengths, and weaknesses.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Recently uploaded (20)
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Data communication and transmission techniques
- 1. Data communication and transmission techniques Fundamentals of OSI and TCP/IP model Basic operations of a switch (startup, NVRAM, flash/IOS backup & recovery) IP Addressing & Summarization: IP address classes Classful and classless IP addresses IP subnetting Understating wild card masks CIDR, FLSM, and VLSM IPv6 fundamentals Basics of Routing RIP EIGRP OSPF LAN Switching: VLAN Basic requirements of VLANs VLAN Database Normal/Extended VLAN, voice VLAN Inter-VLAN routing Switch Virtual Interface (SVI) Implement and Troubleshoot Trunking Trunk encapsulations DTP (Dynamic Trunking Protocol) Native VLAN Manual VLAN pruning VLAN Trunking Protocol Requirement and functionalities of VTP VTP modes/versions VTP revision number VTP pruning VTP authentication Spanning Tree Protocol Needs of STP Switch priority, port priority, path cost, STP timers PVST and PVST+ RSTP and RPVST
- 2. Multi-Spanning Tree (MST) Spanning Tree Enhancements (PortFast, UplinkFast, BackboneFast, etc.) Implement and Troubleshoot Ether-channel LACP, PAgP, manual Layer 2, layer 3 Ether-channel Load-balancing Ether-channel misconfiguration guard First Hop Redundancy Hot Standby Routing Protocol (HSRP) Virtual Routing Redundancy Protocol (VRRP) Gateway Load Balancing Protocol (GLBP) L2- QoS QoS Models and Tools Layer 2 queues Layer 2 Network Security DHCP Snooping Dynamic ARP Inspection (DAI) BPDU Guard, BPDU Filter, Root Guard, Loop Guard, UDLD AAA server VLAN Access-Maps Private VLANs Storm Control Port-Security IP Source Guard Network Services System Management (VTY, Telnet, HTTP, SSH, FTP, TFTP) SNMP, Syslog DHCP client, IOS DHCP server, DHCP relay http://sunny-ccnatutorials.blogspot.in/p/interview-questions-with-answers.html